Age | Commit message (Collapse) | Author | Files | Lines |
|
In nouveau_connector_get_modes(), the return value of drm_mode_duplicate()
is assigned to mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: [email protected]
Fixes: 6ee738610f41 ("drm/nouveau: Add DRM driver for NVIDIA GPUs")
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Retrieving the system framebuffer's parent device in sysfb_init()
increments the parent device's reference count. Hence release the
reference before leaving the init function.
Adding the sysfb platform device acquires and additional reference
for the parent. This keeps the parent device around while the system
framebuffer is in use.
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: 9eac534db001 ("firmware/sysfb: Set firmware-framebuffer parent device")
Cc: Thomas Zimmermann <[email protected]>
Cc: Javier Martinez Canillas <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Sui Jingfeng <[email protected]>
Cc: <[email protected]> # v6.9+
Reviewed-by: Javier Martinez Canillas <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In nv17_tv_get_ld_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: [email protected]
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
In nv17_tv_get_hd_modes(), the return value of drm_mode_duplicate() is
assigned to mode, which will lead to a possible NULL pointer dereference
on failure of drm_mode_duplicate(). The same applies to drm_cvt_mode().
Add a check to avoid null pointer dereference.
Cc: [email protected]
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Lyude Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
KOE TX26D202VM0BWA panel spec indicates the DE signal is active high in
timing chart, so add DISPLAY_FLAGS_DE_HIGH flag in display timing flags.
This aligns display_timing with panel_desc.
Fixes: 8a07052440c2 ("drm/panel: simple: Add support for KOE TX26D202VM0BWA panel")
Signed-off-by: Liu Ying <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Only export struct fb_info.fix.smem_start if that is required by the
user and the memory does not come from vmalloc().
Setting struct fb_info.fix.smem_start breaks systems where DMA
memory is backed by vmalloc address space. An example error is
shown below.
[ 3.536043] ------------[ cut here ]------------
[ 3.540716] virt_to_phys used for non-linear address: 000000007fc4f540 (0xffff800086001000)
[ 3.552628] WARNING: CPU: 4 PID: 61 at arch/arm64/mm/physaddr.c:12 __virt_to_phys+0x68/0x98
[ 3.565455] Modules linked in:
[ 3.568525] CPU: 4 PID: 61 Comm: kworker/u12:5 Not tainted 6.6.23-06226-g4986cc3e1b75-dirty #250
[ 3.577310] Hardware name: NXP i.MX95 19X19 board (DT)
[ 3.582452] Workqueue: events_unbound deferred_probe_work_func
[ 3.588291] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 3.595233] pc : __virt_to_phys+0x68/0x98
[ 3.599246] lr : __virt_to_phys+0x68/0x98
[ 3.603276] sp : ffff800083603990
[ 3.677939] Call trace:
[ 3.680393] __virt_to_phys+0x68/0x98
[ 3.684067] drm_fbdev_dma_helper_fb_probe+0x138/0x238
[ 3.689214] __drm_fb_helper_initial_config_and_unlock+0x2b0/0x4c0
[ 3.695385] drm_fb_helper_initial_config+0x4c/0x68
[ 3.700264] drm_fbdev_dma_client_hotplug+0x8c/0xe0
[ 3.705161] drm_client_register+0x60/0xb0
[ 3.709269] drm_fbdev_dma_setup+0x94/0x148
Additionally, DMA memory is assumed to by contiguous in physical
address space, which is not guaranteed by vmalloc().
Resolve this by checking the module flag drm_leak_fbdev_smem when
DRM allocated the instance of struct fb_info. Fbdev-dma then only
sets smem_start only if required (via FBINFO_HIDE_SMEM_START). Also
guarantee that the framebuffer is not located in vmalloc address
space.
Signed-off-by: Thomas Zimmermann <[email protected]>
Reported-by: Peng Fan (OSS) <[email protected]>
Closes: https://lore.kernel.org/dri-devel/[email protected]/
Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdX3N0szUvt1VTbroa2zrT1Nye_VzPb5qqCZ7z5gSm7HGw@mail.gmail.com/
Fixes: a51c7663f144 ("drm/fb-helper: Consolidate CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM")
Tested-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Cc: <[email protected]> # v6.4+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Roll -rc3 and current drm/fixes in.
This will also unstuck our for-next branch.
Signed-off-by: Maxime Ripard <[email protected]>
|
|
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.
The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <[email protected]>
Signed-off-by: pengfuyuan <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Liviu Dudau <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Regression fix
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <[email protected]>
From: Inki Dae <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
disable c6 called in guc_pc_fini_hw is unreachable.
GuC PC init returns earlier if skip_guc_pc is true and never
registers the finish call thus making disable_c6 unreachable.
move this call to gt idle.
v2: rebase
v3: add fixes tag (Himal)
Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 6800e63cf97bae62bca56d8e691544540d945f53)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Tests show that user fence signalling requires kind of write barrier,
otherwise not all writes performed by the workload will be available
to userspace. It is already done for render and compute, we need it
also for the rest: video, gsc, copy.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Andrzej Hajda <[email protected]>
Reviewed-by: Thomas Hellström <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3ad7d18c5dad75ed38098c7cc3bc9594b4701399)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The Local Memory (aka VRAM) is only available on DGFX platforms.
We shouldn't attempt to provision VFs with LMEM or attempt to
update the LMTT on non-DGFX platforms. Add missing asserts that
would enforce that and fix release code that could crash on iGFX
due to uninitialized LMTT.
Fixes: 0698ff57bf32 ("drm/xe/pf: Update the LMTT when freeing VF GT config")
Signed-off-by: Michal Wajdeczko <[email protected]>
Cc: Piotr Piórkowski <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit b321cb83a375bcc18cd0a4b62bdeaf6905cca769)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
The rc6 registers used in disable_c6 function belong
to the GT forcewake domain. Hence change the forcewake
assertion to check GT forcewake domain.
v2: add fixes tag (Himal)
Fixes: 975e4a3795d4 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Signed-off-by: Riana Tauro <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
(cherry picked from commit 21b708554648177a0078962c31629bce31ef5d83)
Signed-off-by: Thomas Hellström <[email protected]>
|
|
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
This driver users the component model and shutdown happens in the base
driver. The "drvdata" for this driver will always be valid if
shutdown() is called and as of commit 2a073968289d
("drm/atomic-helper: drm_atomic_helper_shutdown(NULL) should be a
noop") we don't need to confirm that "drm" is non-NULL.
Suggested-by: Maxime Ripard <[email protected]>
Reviewed-by: Maxime Ripard <[email protected]>
Reviewed-by: Fei Shao <[email protected]>
Tested-by: Fei Shao <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611102744.v2.1.I2b014f90afc4729b6ecc7b5ddd1f6dedcea4625b@changeid
|
|
Based on grepping through the source code, this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time.
This is important because drm_atomic_helper_shutdown() will cause
panels to get disabled cleanly which may be important for their power
sequencing. Future changes will remove any custom powering off in
individual panel drivers so the DRM drivers need to start getting this
right.
The fact that we should call drm_atomic_helper_shutdown() in the case of
OS shutdown comes straight out of the kernel doc "driver instance
overview" in drm_drv.c.
[geert: shmob_drm_remove() already calls drm_atomic_helper_shutdown]
Suggested-by: Maxime Ripard <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/20230901164111.RFT.15.Iaf638a1d4c8b3c307a6192efabb4cbb06b195f15@changeid
[geert: s/drm_helper_force_disable_all/drm_atomic_helper_shutdown/]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: Sui Jingfeng <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/17c6a5a668e5975f871b77fb1fca6711a0799d9e.1718176895.git.geert+renesas@glider.be
|
|
'init_exec' is unused since
commit cb75d97e9c77 ("drm/nouveau: implement devinit subdev, and new
init table parser")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
If the card doesn't have display hardware, hpd_work and hpd_lock are
left uninitialized which causes BUG when attempting to schedule hpd_work
on runtime PM resume.
Fix it by adding headless flag to DRM and skip any hpd if it's set.
Fixes: ae1aadb1eb8d ("nouveau: don't fail driver load if no display hw present.")
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/337
Signed-off-by: Vasily Khoruzhick <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Signed-off-by: Danilo Krummrich <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This happens when the amdgpu_bo_release_notify running
before amdgpu_ttm_set_buffer_funcs_status set the buffer
funcs to enabled.
check the buffer funcs enablement before calling the fill
buffer memory.
v2:(Christian)
- Apply it only for GEM buffers and since GEM buffers are only
allocated/freed while the driver is loaded we never run into
the issue to clear with buffer funcs disabled.
v3:(Mario)
- drop the stable tag as this will presumably go into a
-fixes PR for 6.10
Log snip:
*ERROR* Trying to clear memory with ring turned off.
RIP: 0010:amdgpu_bo_release_notify+0x201/0x220 [amdgpu]
Fixes: a68c7eaa7a8f ("drm/amdgpu: Enable clear page functionality")
Signed-off-by: Arunpravin Paneer Selvam <[email protected]>
Reviewed-by: Christian König <[email protected]>
Tested-by: Mikhail Gavrilov <[email protected]>
Tested-by: Richard Gong <[email protected]>
Suggested-by: Christian König <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Device managed panel bridge wrappers are created by calling to
drm_panel_bridge_add_typed() and registering a release handler for
clean-up when the device gets unbound.
Since the memory for this bridge is also managed and linked to the panel
device, the release function should not try to free that memory.
Moreover, the call to devm_kfree() inside drm_panel_bridge_remove() will
fail in this case and emit a warning because the panel bridge resource
is no longer on the device resources list (it has been removed from
there before the call to release handlers).
Fixes: 67022227ffb1 ("drm/bridge: Add a devm_ allocator for panel bridge.")
Signed-off-by: Adam Miotk <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
komeda_pipeline_get_state() may return an error-valued pointer, thus
check the pointer for negative or null value before dereferencing.
Fixes: 502932a03fce ("drm/komeda: Add the initial scaler support for CORE")
Signed-off-by: Amjad Ouled-Ameur <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Similar to the other Aya Neo devices this one features
again a portrait screen, here with a native resolution
of 1600x2560.
Signed-off-by: Tobias Jakobi <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The duplicated EDID is never freed. Fix it.
Cc: [email protected]
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
|
|
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
|
|
When reading EDID fails and driver reports no modes available, the DRM
core adds an artificial 1024x786 mode to the connector. Unfortunately
some variants of the Exynos HDMI (like the one in Exynos4 SoCs) are not
able to drive such mode, so report a safe 640x480 mode instead of nothing
in case of the EDID reading failure.
This fixes the following issue observed on Trats2 board since commit
13d5b040363c ("drm/exynos: do not return negative values from .get_modes()"):
[drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops)
exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops)
exynos-dsi 11c80000.dsi: [drm:samsung_dsim_host_attach] Attached s6e8aa0 device (lanes:4 bpp:24 mode-flags:0x10b)
exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops)
exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops)
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
exynos-hdmi 12d00000.hdmi: [drm:hdmiphy_enable.part.0] *ERROR* PLL could not reach steady state
panel-samsung-s6e8aa0 11c80000.dsi.0: ID: 0xa2, 0x20, 0x8c
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
------------[ cut here ]------------
WARNING: CPU: 1 PID: 11 at drivers/gpu/drm/drm_atomic_helper.c:1682 drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
[CRTC:70:crtc-1] vblank wait timed out
Modules linked in:
CPU: 1 PID: 11 Comm: kworker/u16:0 Not tainted 6.9.0-rc5-next-20240424 #14913
Hardware name: Samsung Exynos (Flattened Device Tree)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x68/0x88
dump_stack_lvl from __warn+0x7c/0x1c4
__warn from warn_slowpath_fmt+0x11c/0x1a8
warn_slowpath_fmt from drm_atomic_helper_wait_for_vblanks.part.0+0x2b0/0x2b8
drm_atomic_helper_wait_for_vblanks.part.0 from drm_atomic_helper_commit_tail_rpm+0x7c/0x8c
drm_atomic_helper_commit_tail_rpm from commit_tail+0x9c/0x184
commit_tail from drm_atomic_helper_commit+0x168/0x190
drm_atomic_helper_commit from drm_atomic_commit+0xb4/0xe0
drm_atomic_commit from drm_client_modeset_commit_atomic+0x23c/0x27c
drm_client_modeset_commit_atomic from drm_client_modeset_commit_locked+0x60/0x1cc
drm_client_modeset_commit_locked from drm_client_modeset_commit+0x24/0x40
drm_client_modeset_commit from __drm_fb_helper_restore_fbdev_mode_unlocked+0x9c/0xc4
__drm_fb_helper_restore_fbdev_mode_unlocked from drm_fb_helper_set_par+0x2c/0x3c
drm_fb_helper_set_par from fbcon_init+0x3d8/0x550
fbcon_init from visual_init+0xc0/0x108
visual_init from do_bind_con_driver+0x1b8/0x3a4
do_bind_con_driver from do_take_over_console+0x140/0x1ec
do_take_over_console from do_fbcon_takeover+0x70/0xd0
do_fbcon_takeover from fbcon_fb_registered+0x19c/0x1ac
fbcon_fb_registered from register_framebuffer+0x190/0x21c
register_framebuffer from __drm_fb_helper_initial_config_and_unlock+0x350/0x574
__drm_fb_helper_initial_config_and_unlock from exynos_drm_fbdev_client_hotplug+0x6c/0xb0
exynos_drm_fbdev_client_hotplug from drm_client_register+0x58/0x94
drm_client_register from exynos_drm_bind+0x160/0x190
exynos_drm_bind from try_to_bring_up_aggregate_device+0x200/0x2d8
try_to_bring_up_aggregate_device from __component_add+0xb0/0x170
__component_add from mixer_probe+0x74/0xcc
mixer_probe from platform_probe+0x5c/0xb8
platform_probe from really_probe+0xe0/0x3d8
really_probe from __driver_probe_device+0x9c/0x1e4
__driver_probe_device from driver_probe_device+0x30/0xc0
driver_probe_device from __device_attach_driver+0xa8/0x120
__device_attach_driver from bus_for_each_drv+0x80/0xcc
bus_for_each_drv from __device_attach+0xac/0x1fc
__device_attach from bus_probe_device+0x8c/0x90
bus_probe_device from deferred_probe_work_func+0x98/0xe0
deferred_probe_work_func from process_one_work+0x240/0x6d0
process_one_work from worker_thread+0x1a0/0x3f4
worker_thread from kthread+0x104/0x138
kthread from ret_from_fork+0x14/0x28
Exception stack(0xf0895fb0 to 0xf0895ff8)
...
irq event stamp: 82357
hardirqs last enabled at (82363): [<c01a96e8>] vprintk_emit+0x308/0x33c
hardirqs last disabled at (82368): [<c01a969c>] vprintk_emit+0x2bc/0x33c
softirqs last enabled at (81614): [<c0101644>] __do_softirq+0x320/0x500
softirqs last disabled at (81609): [<c012dfe0>] __irq_exit_rcu+0x130/0x184
---[ end trace 0000000000000000 ]---
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CRTC:70:crtc-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [CONNECTOR:74:HDMI-A-1] commit wait timed out
exynos-drm exynos-drm: [drm] *ERROR* flip_done timed out
exynos-drm exynos-drm: [drm] *ERROR* [PLANE:56:plane-5] commit wait timed out
exynos-mixer 12c10000.mixer: timeout waiting for VSYNC
Cc: [email protected]
Fixes: 13d5b040363c ("drm/exynos: do not return negative values from .get_modes()")
Signed-off-by: Marek Szyprowski <[email protected]>
Signed-off-by: Inki Dae <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Convert PCI core error codes to proper error numbers since latter get
propagated all the way up to the module loading functions
* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Convert PCIBIOS_* return codes to errnos
EDAC/amd64: Convert PCIBIOS_* return codes to errnos
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the SiFive PRCI clocks so that the device boots again.
This driver was registering clkdev lookups that were always going to
be useless. This wasn't a problem until clkdev started returning an
error in these cases, causing this driver to fail probe, and thus boot
to fail because clks are essential for most drivers. The fix is
simple, don't use clkdev because this is a DT based system where
clkdev isn't used"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sifive: Do not register clkdevs for PRCI clocks
|
|
Pull smb client fixes from Steve French:
"Two small smb3 client fixes:
- fix deadlock in umount
- minor cleanup due to netfs change"
* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Don't advance the I/O iterator before terminating subrequest
smb: client: fix deadlock in smb2_find_smb_tcon()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- fix potential read out of bounds in hid-asus (Andrew Ballance)
- fix endian-conversion on little endian systems in intel-ish-hid (Arnd
Bergmann)
- A couple of new input event codes (Aseda Aboagye)
- errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
(Christophe JAILLET), hid-logitech-dj (José Expósito)
- current leakage fix while the device is in suspend on a i2c-hid
laptop (Johan Hovold)
- other assorted smaller fixes and device ID / quirk entry additions
* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: Ignore battery for ELAN touchscreens 2F2C and 4116
HID: i2c-hid: elan: fix reset suspend current leakage
dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
input: Add support for "Do Not Disturb"
input: Add event code for accessibility key
hid: asus: asus_report_fixup: fix potential read out of bounds
HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
HID: intel-ish-hid: fix endian-conversion
HID: nintendo: Fix an error handling path in nintendo_hid_probe()
HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
HID: core: remove unnecessary WARN_ON() in implement()
HID: nvidia-shield: Add missing check for input_ff_create_memless
HID: intel-ish-hid: Fix build error for COMPILE_TEST
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the initial state of the save button in 'make gconfig'
- Improve the Kconfig documentation
- Fix a Kconfig bug regarding property visibility
- Fix build breakage for systems where 'sed' is not installed in /bin
- Fix a false warning about missing MODULE_DESCRIPTION()
* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
kconfig: remove wrong expr_trans_bool()
kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
kconfig: doc: fix a typo in the note about 'imply'
kconfig: gconf: give a proper initial state to the Save button
kconfig: remove unneeded code for user-supplied values being out of range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fixes for the new ipu6 driver (and related fixes to mei csi driver)
- fix a double debugfs remove logic at mgb4 driver
- a documentation fix
* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: intel/ipu6: add csi2 port sanity check in notifier bound
media: intel/ipu6: update the maximum supported csi2 port number to 6
media: mei: csi: Warn less verbosely of a missing device fwnode
media: mei: csi: Put the IPU device reference
media: intel/ipu6: fix the buffer flags caused by wrong parentheses
media: intel/ipu6: Fix an error handling path in isys_probe()
media: intel/ipu6: Move isys_remove() close to isys_probe()
media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
media: Documentation: v4l: Fix ACTIVE route flag
media: mgb4: Fix double debugfs remove
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix possible memory leak the riscv-intc irqchip driver load failures
- Fix boot crash in the sifive-plic irqchip driver caused by recently
changed boot initialization order
- Fix race condition in the gic-v3-its irqchip driver
* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous fixes:
- Fix kexec() crash if call depth tracking is enabled
- Fix SMN reads on inaccessible registers on certain AMD systems"
* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Check for invalid SMN reads
x86/kexec: Fix bug with call depth tracking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fix from Ingo Molnar:
"Fix race between perf_event_free_task() and perf_event_release_kernel()
that can result in missed wakeups and hung tasks"
* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix missing wakeup when waiting for context reference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking doc fix from Ingo Molnar:
"Fix typos in the kerneldoc of some of the atomic APIs"
* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"14 hotfixes, 6 of which are cc:stable.
All except the nilfs2 fix affect MM and all are singletons - see the
chagelogs for details"
* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
mm: fix xyz_noprof functions calling profiled functions
codetag: avoid race at alloc_slab_obj_exts
mm/hugetlb: do not call vma_add_reservation upon ENOMEM
mm/ksm: fix ksm_zero_pages accounting
mm/ksm: fix ksm_pages_scanned accounting
kmsan: do not wipe out origin when doing partial unpoisoning
vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
mm: page_alloc: fix highatomic typing in multi-block buddies
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
memcg: remove the lockdep assert from __mod_objcg_mlstate()
mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
mm: drop the 'anon_' prefix for swap-out mTHP counters
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- interrupt handling and Kconfig fixes for gpio-tqmx86
- add a buffer for storing output values in gpio-tqmx86 as reading back
the registers always returns the input values
- add missing MODULE_DESCRIPTION()s to several GPIO drivers
* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: add missing MODULE_DESCRIPTION() macros
gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
gpio: tqmx86: store IRQ trigger type and unmask status separately
gpio: tqmx86: introduce shadow register for GPIO output value
gpio: tqmx86: fix typo in Kconfig label
|
|
Pull block fixes from Jens Axboe:
- Fix for null_blk block size validation (Andreas)
- NVMe pull request via Keith:
- Use reserved tags for special fabrics operations (Chunguang)
- Persistent Reservation status masking fix (Weiwen)
* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
null_blk: fix validation of block size
nvme: fix nvme_pr_* status code parsing
nvme-fabrics: use reserved tag for reg read/write command
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a locking order issue with setting max async thread workers
(Hagar)
- Fix for a NULL pointer dereference for failed async flagged requests
using ring provided buffers. This doesn't affect the current kernel,
but it does affect older kernels, and is being queued up for 6.10
just to make the stable process easier (me)
- Fix for NAPI timeout calculations for how long to busy poll, and
subsequently how much to sleep post that if a wait timeout is passed
in (me)
- Fix for a regression in this release cycle, where we could end up
using a partially unitialized match value for io-wq (Su)
* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
io_uring: fix possible deadlock in io_register_iowq_max_workers()
io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
io_uring/napi: fix timeout calculation
io_uring: check for non-NULL file pointer in io_file_can_poll()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix handling of folio private changes.
The private value holds pointer to our extent buffer structure
representing a metadata range. Release and create of the range was
not properly synchronized when updating the private bit which ended
up in double folio_put, leading to all sorts of breakage
- fix a crash, reported as duplicate key in metadata, but caused by a
race of fsync and size extending write. Requires prealloc target
range + fsync and other conditions (log tree state, timing)
- fix leak of qgroup extent records after transaction abort
* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: protect folio::private when attaching extent buffer folios
btrfs: fix leak of qgroup extent records after transaction abort
btrfs: fix crash on racing fsync and size-extending write into prealloc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an occasional memory overwrite caused by a fix added in 6.10
* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Fix loop termination condition in gss_free_in_token_pages()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Another fix to avoid allocating pages that overlap with ERR_PTR,
which manifests on rv32
- A revert for the badaccess patch I incorrectly picked up an early
version of
* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
Revert "riscv: mm: accelerate pagefault when badaccess"
riscv: fix overlap of allocated page and PTR_ERR
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix spurious CPU hotplug warning message from SETEND emulation code
- Fix the build when GCC wasn't inlining our I/O accessor internals
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/io: add constant-argument check
arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Default silead touchscreen driver to 10 fingers and drop 10 finger
setting from all DMI quirks. More of a cleanup then a pure fix, but
since the DMI quirks always get updated through the fixes branch
this avoids conflicts.
- Kconfig fix for randconfig builds
- dell-smbios: Fix wrong token data in sysfs
- amd-hsmp: Fix driver poking unsupported hw when loaded manually
* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
platform/x86: dell-smbios: Simplify error handling
platform/x86: dell-smbios: Fix wrong token data in sysfs
platform/x86: yt2-1380: add CONFIG_EXTCON dependency
platform/x86: touchscreen_dmi: Use 2-argument strscpy()
platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
Input: silead - Always support 10 fingers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Core:
- Make iommu-dma code recognize 'force_aperture' again
- Fix for potential NULL-ptr dereference from iommu_sva_bind_device()
return value
AMD IOMMU fixes:
- Fix lockdep splat for invalid wait context
- Add feature bit check before enabling PPR
- Make workqueue name fit into buffer
- Fix memory leak in sysfs code"
* tag 'iommu-fixes-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix Invalid wait context issue
iommu/amd: Check EFR[EPHSup] bit before enabling PPR
iommu/amd: Fix workqueue name
iommu: Return right value in iommu_sva_bind_device()
iommu/dma: Fix domain init
iommu/amd: Fix sysfs leak in iommu init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix a regression for the PATA MacIO driver were it would fail to
probe because of the recent changes of initializing the limits in
SCSI core
* tag 'ata-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes: vmwgfx leads the way this week, with minor changes in xe
and amdgpu and a couple of other small fixes.
Seems quiet enough.
xe:
- Update the LMTT when freeing VF GT config
amdgpu:
- Fix shutdown issues on some SMU 13.x platforms
- Silence some UBSAN flexible array warnings
panel:
- sitronix-st7789v: handle of_drm_get_panel_orientation failing
error
vmwgfx:
- filter modes greater than available graphics memory
- fix 3D vs STDU enable
- remove STDU logic from mode valid
- logging fix
- memcmp pointers fix
- remove unused struct
- screen target lifetime fix
komeda:
- unused struct removal"
* tag 'drm-fixes-2024-06-07' of https://gitlab.freedesktop.org/drm/kernel:
drm/vmwgfx: Don't memcmp equivalent pointers
drm/vmwgfx: remove unused struct 'vmw_stdu_dma'
drm/vmwgfx: Don't destroy Screen Target when CRTC is enabled but inactive
drm/vmwgfx: Standardize use of kibibytes when logging
drm/vmwgfx: Remove STDU logic from generic mode_valid function
drm/vmwgfx: 3D disabled should not effect STDU memory limits
drm/vmwgfx: Filter modes which exceed graphics memory
drm/amdgpu/pptable: Fix UBSAN array-index-out-of-bounds
drm/amd: Fix shutdown (again) on some SMU v13.0.4/11 platforms
drm/xe/pf: Update the LMTT when freeing VF GT config
drm/panel: sitronix-st7789v: Add check for of_drm_get_panel_orientation
drm/komeda: remove unused struct 'gamma_curve_segment'
|