| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Optimize CPT PF identification in mbox handling for faster
mbox response by doing it at AF driver probe instead of
every mbox message.
Signed-off-by: Srujana Challa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On OcteonTX2 platform CPT instruction enqueue is only
possible via LMTST operations.
The existing FLR sequence mentioned in HRM requires
a dummy LMTST to CPT but LMTST can't be submitted from
AF driver. So, HW team provided a new sequence to avoid
dummy LMTST. This patch adds code for the same.
Signed-off-by: Srujana Challa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On OcteonTX2 SoC, the admin function (AF) is the only one with all
priviliges to configure HW and alloc resources, PFs and it's VFs
have to request AF via mailbox for all their needs.
This patch adds a new mailbox for CPT VFs to request for CPT LF
reset.
Signed-off-by: Srujana Challa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When CPT engine has uncorrectable errors, it will get halted and
must be disabled and re-enabled. This patch adds code for the same.
Signed-off-by: Srujana Challa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.2-2023-01-19:
amdgpu:
- Fix display scaling
- Fix RN/CZN power reporting on some firmware versions
- Colorspace fixes
- Fix resource freeing in error case in CS IOCTL
- Fix warning on driver unload
- GC11 fixes
- DCN 3.1.4/5 S/G display workarounds
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A fix for vc4 to address a memory leak when allocating a buffer, a
Kconfig fix for panfrost and two fixes for i915 and fb-helper to
address some bugs with vga-switcheroo.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119082059.h32bs7zqoxmjbcvn@houat
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Reject display plane with height == 0 (Drew)
- re-disable RC6p on Sandy Bridge (Sasa)
- Fix hugepages' selftest (Chris)
- DG2 hw workarounds (Matt Atwood)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8mf3/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent reading into undefined memory in the expression lexer,
accounting for a trailer backslash followed by the null byte.
- Fix file mode when copying files to the build id cache, the problem
happens when the cache directory is in a different file system than
the file being cached, otherwise the mode was preserved as only a
hard link would be done to save space.
- Fix a related build-id 'perf test' entry that checked that permission
when caching PE (Portable Executable) files, used when profiling
Windows executables under wine.
- Sync the tools/ copies of kvm headers, build_bug.h, socket.h and
arm64's cputype.h with the kernel sources.
* tag 'perf-tools-fixes-for-v6.2-3-2023-01-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test build-id: Fix test check for PE file
perf buildid-cache: Fix the file mode with copyfile() while adding file to build-id cache
perf expr: Prevent normalize() from reading into undefined memory in the expression lexer
tools headers: Syncronize linux/build_bug.h with the kernel sources
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools kvm headers arm64: Update KVM header from the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
|
|
info'
Eduard Zingerman says:
====================
Struct bpf_reg_state is copied directly in several places including:
- check_stack_write_fixed_off() (via save_register_state());
- check_stack_read_fixed_off();
- find_equal_scalars().
However, a literal copy of this struct also copies the following fields:
struct bpf_reg_state {
...
struct bpf_reg_state *parent;
...
enum bpf_reg_liveness live;
...
};
This breaks register parentage chain and liveness marking logic.
The commit message for the first patch has a detailed example.
This patch-set replaces direct copies with a call to a function
copy_register_state(dst,src), which preserves 'parent' and 'live'
fields of the 'dst'.
The fix comes with a significant verifier runtime penalty for some
selftest binaries listed in tools/testing/selftests/bpf/veristat.cfg
and cilium BPF binaries (see [1]):
$ ./veristat -e file,prog,states -C -f 'states_diff>10' master-baseline.log current.log
File Program States (A) States (B) States (DIFF)
-------------------------- -------------------------------- ---------- ---------- ---------------
bpf_host.o tail_handle_ipv4_from_host 231 299 +68 (+29.44%)
bpf_host.o tail_handle_nat_fwd_ipv4 1088 1320 +232 (+21.32%)
bpf_host.o tail_handle_nat_fwd_ipv6 716 729 +13 (+1.82%)
bpf_host.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%)
bpf_host.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%)
bpf_lxc.o tail_handle_nat_fwd_ipv4 1088 1320 +232 (+21.32%)
bpf_lxc.o tail_handle_nat_fwd_ipv6 716 729 +13 (+1.82%)
bpf_lxc.o tail_ipv4_ct_egress 239 262 +23 (+9.62%)
bpf_lxc.o tail_ipv4_ct_ingress 239 262 +23 (+9.62%)
bpf_lxc.o tail_ipv4_ct_ingress_policy_only 239 262 +23 (+9.62%)
bpf_lxc.o tail_ipv6_ct_egress 181 195 +14 (+7.73%)
bpf_lxc.o tail_ipv6_ct_ingress 181 195 +14 (+7.73%)
bpf_lxc.o tail_ipv6_ct_ingress_policy_only 181 195 +14 (+7.73%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%)
bpf_lxc.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%)
bpf_overlay.o tail_handle_nat_fwd_ipv4 799 829 +30 (+3.75%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv4 281 314 +33 (+11.74%)
bpf_overlay.o tail_nodeport_nat_ingress_ipv6 245 256 +11 (+4.49%)
bpf_sock.o cil_sock4_connect 47 70 +23 (+48.94%)
bpf_sock.o cil_sock4_sendmsg 45 68 +23 (+51.11%)
bpf_sock.o cil_sock6_post_bind 31 42 +11 (+35.48%)
bpf_xdp.o tail_lb_ipv4 4413 6457 +2044 (+46.32%)
bpf_xdp.o tail_lb_ipv6 6876 7249 +373 (+5.42%)
test_cls_redirect.bpf.o cls_redirect 4704 4799 +95 (+2.02%)
test_tcp_hdr_options.bpf.o estab 180 206 +26 (+14.44%)
xdp_synproxy_kern.bpf.o syncookie_tc 21059 21485 +426 (+2.02%)
xdp_synproxy_kern.bpf.o syncookie_xdp 21857 23122 +1265 (+5.79%)
-------------------------- -------------------------------- ---------- ---------- ---------------
I looked through verification log for bpf_xdp.o tail_lb_ipv4 program in
order to identify the reason for ~50% visited states increase.
The slowdown is triggered by a difference in handling of three stack slots:
fp-56, fp-72 and fp-80, with the main difference coming from fp-72.
In fact the following change removes all the difference:
@@ -3256,7 +3256,10 @@ static void save_register_state(struct bpf_func_state *state,
{
int i;
- copy_register_state(&state->stack[spi].spilled_ptr, reg);
+ if ((spi == 6 /*56*/ || spi == 8 /*72*/ || spi == 9 /*80*/) && size != BPF_REG_SIZE)
+ state->stack[spi].spilled_ptr = *reg;
+ else
+ copy_register_state(&state->stack[spi].spilled_ptr, reg);
For fp-56 I found the following pattern for divergences between
verification logs with and w/o this patch:
- At some point insn 1862 is reached and checkpoint is created;
- At some other point insn 1862 is reached again:
- with this patch:
- the current state is considered *not* equivalent to the old checkpoint;
- the reason for mismatch is the state of fp-56:
- current state: fp-56=????mmmm
- checkpoint: fp-56_rD=mmmmmmmm
- without this patch the current state is considered equivalent to the
checkpoint, the fp-56 is not present in the checkpoint.
Here is a fragment of the verification log for when the checkpoint in
question created at insn 1862:
checkpoint 1862: ... fp-56=mmmmmmmm ...
1862: ...
1863: ...
1864: (61) r1 = *(u32 *)(r0 +0)
1865: ...
1866: (63) *(u32 *)(r10 -56) = r1 ; R1_w=scalar(...) R10=fp0 fp-56=
1867: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
1868: (07) r2 += -56 ; R2_w=fp-56
; return map_lookup_elem(&LB4_BACKEND_MAP_V2, &backend_id);
1869: (18) r1 = 0xffff888100286000 ; R1_w=map_ptr(off=0,ks=4,vs=8,imm=0)
1871: (85) call bpf_map_lookup_elem#1
- Without this patch:
- at insn 1864 r1 liveness is set to REG_LIVE_WRITTEN;
- at insn 1866 fp-56 liveness is set REG_LIVE_WRITTEN mark because
of the direct r1 copy in save_register_state();
- at insn 1871 REG_LIVE_READ is not propagated to fp-56 at
checkpoint 1862 because of the REG_LIVE_WRITTEN mark;
- eventually fp-56 is pruned from checkpoint at 1862 in
clean_func_state().
- With this patch:
- at insn 1864 r1 liveness is set to REG_LIVE_WRITTEN;
- at insn 1866 fp-56 liveness is *not* set to REG_LIVE_WRITTEN mark
because write size is not equal to BPF_REG_SIZE;
- at insn 1871 REG_LIVE_READ is propagated to fp-56 at checkpoint 1862.
Hence more states have to be visited by verifier with this patch compared
to current master.
Similar patterns could be found for both fp-72 and fp-80, although these
are harder to track trough the log because of a big number of insns between
slot write and bpf_map_lookup_elem() call triggering read mark, boils down
to the following C code:
struct ipv4_frag_id frag_id = {
.daddr = ip4->daddr,
.saddr = ip4->saddr,
.id = ip4->id,
.proto = ip4->protocol,
.pad = 0,
};
...
map_lookup_elem(..., &frag_id);
Where:
- .id is mapped to fp-72, write of size u16;
- .saddr is mapped to fp-80, write of size u32.
This patch-set is a continuation of discussion from [2].
Changes v1 -> v2 (no changes in the code itself):
- added analysis for the tail_lb_ipv4 verification slowdown;
- rebase against fresh master branch.
[1] [email protected]:anakryiko/cilium.git
[2] https://lore.kernel.org/bpf/[email protected]/
====================
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
A testcase to check that verifier.c:copy_register_state() preserves
register parentage chain and livness information.
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Register range information is copied in several places. The intent is
to transfer range/id information from one register/stack spill to
another. Currently this is done using direct register assignment, e.g.:
static void find_equal_scalars(..., struct bpf_reg_state *known_reg)
{
...
struct bpf_reg_state *reg;
...
*reg = *known_reg;
...
}
However, such assignments also copy the following bpf_reg_state fields:
struct bpf_reg_state {
...
struct bpf_reg_state *parent;
...
enum bpf_reg_liveness live;
...
};
Copying of these fields is accidental and incorrect, as could be
demonstrated by the following example:
0: call ktime_get_ns()
1: r6 = r0
2: call ktime_get_ns()
3: r7 = r0
4: if r0 > r6 goto +1 ; r0 & r6 are unbound thus generated
; branch states are identical
5: *(u64 *)(r10 - 8) = 0xdeadbeef ; 64-bit write to fp[-8]
--- checkpoint ---
6: r1 = 42 ; r1 marked as written
7: *(u8 *)(r10 - 8) = r1 ; 8-bit write, fp[-8] parent & live
; overwritten
8: r2 = *(u64 *)(r10 - 8)
9: r0 = 0
10: exit
This example is unsafe because 64-bit write to fp[-8] at (5) is
conditional, thus not all bytes of fp[-8] are guaranteed to be set
when it is read at (8). However, currently the example passes
verification.
First, the execution path 1-10 is examined by verifier.
Suppose that a new checkpoint is created by is_state_visited() at (6).
After checkpoint creation:
- r1.parent points to checkpoint.r1,
- fp[-8].parent points to checkpoint.fp[-8].
At (6) the r1.live is set to REG_LIVE_WRITTEN.
At (7) the fp[-8].parent is set to r1.parent and fp[-8].live is set to
REG_LIVE_WRITTEN, because of the following code called in
check_stack_write_fixed_off():
static void save_register_state(struct bpf_func_state *state,
int spi, struct bpf_reg_state *reg,
int size)
{
...
state->stack[spi].spilled_ptr = *reg; // <--- parent & live copied
if (size == BPF_REG_SIZE)
state->stack[spi].spilled_ptr.live |= REG_LIVE_WRITTEN;
...
}
Note the intent to mark stack spill as written only if 8 bytes are
spilled to a slot, however this intent is spoiled by a 'live' field copy.
At (8) the checkpoint.fp[-8] should be marked as REG_LIVE_READ but
this does not happen:
- fp[-8] in a current state is already marked as REG_LIVE_WRITTEN;
- fp[-8].parent points to checkpoint.r1, parentage chain is used by
mark_reg_read() to mark checkpoint states.
At (10) the verification is finished for path 1-10 and jump 4-6 is
examined. The checkpoint.fp[-8] never gets REG_LIVE_READ mark and this
spill is pruned from the cached states by clean_live_states(). Hence
verifier state obtained via path 1-4,6 is deemed identical to one
obtained via path 1-6 and program marked as safe.
Note: the example should be executed with BPF_F_TEST_STATE_FREQ flag
set to force creation of intermediate verifier states.
This commit revisits the locations where bpf_reg_state instances are
copied and replaces the direct copies with a call to a function
copy_register_state(dst, src) that preserves 'parent' and 'live'
fields of the 'dst'.
Fixes: 679c782de14b ("bpf/verifier: per-register parent pointers")
Signed-off-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm-fixes for v6.3-rc5
Two GPU fixes which were meant to be part of the previous pull request,
but I'd forgotten to fetch from gitlab after the MR was merged so that
git tag was applied to the wrong commit.
- kexec shutdown fix
- fix potential double free
Signed-off-by: Dave Airlie <[email protected]>
From: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGskguoVsz2wqAK2k+f32LwcVY5JC6+e2RwLqZswz3RY2Q@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Prevent a potential deadlock when configuring kgdb console
- Fix a kernel doc warning
* tag 'printk-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
kernel/printk/printk.c: Fix W=1 kernel-doc warning
tty: serial: kgdboc: fix mutex locking order for configure_kgdboc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 build fix from Heiko Carstens:
- Workaround invalid gcc-11 out of bounds read warning caused by s390's
S390_lowcore definition. This happens only with gcc 11.1.0 and
11.2.0.
The code which causes this warning will be gone with the next merge
window. Therefore just replace the memcpy() with a for loop to get
rid of the warning.
* tag 's390-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: workaround invalid gcc-11 out of bounds read warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Just a single fix, since the lkp report originally for a slub-tiny
commit ended up being a gcov/compiler bug:
- periodically resched in SLAB's drain_freelist(), by David Rientjes"
* tag 'slab-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: periodically resched in drain_freelist()
|
|
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes: 4748f9687caa ("thermal: core: fix some possible name leaks in error paths")
Fixes: c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <[email protected]>
Signed-off-by: Viresh Kumar <[email protected]>
Tested-by: Frank Rowand <[email protected]>
Reviewed-by: Yang Yingliang <[email protected]>
Tested-by: Caleb Connolly <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
"USB-serial fixes for 6.2-rc5
Here are some new device ids, mostly for Quectel modems.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.2-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel EM05CN modem
USB: serial: option: add Quectel EM05CN (SG) modem
USB: serial: cp210x: add SCALANCE LPE-9000 device id
USB: serial: option: add Quectel EC200U modem
USB: serial: option: add Quectel EM05-G (RS) modem
USB: serial: option: add Quectel EM05-G (GR) modem
USB: serial: option: add Quectel EM05-G (CS) modem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fix from Damien Le Moal:
- A single patch to fix sync write operations to detect and handle
errors due to external zone corruptions resulting in writes at
invalid location, from me.
* tag 'zonefs-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Detect append writes at invalid locations
|
|
If the target ring is configured with IOPOLL, then we always need to hold
the target ring uring_lock before posting CQEs. We could just grab it
unconditionally, but since we don't expect many target rings to be of this
type, make grabbing the uring_lock conditional on the ring type.
Link: https://lore.kernel.org/io-uring/Y8krlYa52%[email protected]/
Reported-by: Xingyuan Mo <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Avoid race between process wakeup and tpacket_v3 block timeout.
The test waits for cfg_timeout_msec for packets to arrive. Packets
arrive in tpacket_v3 rings, which pass packets ("frames") to the
process in batches ("blocks"). The sk waits for req3.tp_retire_blk_tov
msec to release a block.
Set the block timeout lower than the process waiting time, else
the process may find that no block has been released by the time it
scans the socket list. Convert to a ring of more than one, smaller,
blocks with shorter timeouts. Blocks must be page aligned, so >= 64KB.
Fixes: 5ebfb4cc3048 ("selftests/net: toeplitz test")
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The referenced commit changed the error code returned by the kernel
when preventing a non-established socket from attaching the ktls
ULP. Before to such a commit, the user-space got ENOTCONN instead
of EINVAL.
The existing self-tests depend on such error code, and the change
caused a failure:
RUN global.non_established ...
tls.c:1673:non_established:Expected errno (22) == ENOTCONN (107)
non_established: Test failed at step #3
FAIL global.non_established
In the unlikely event existing applications do the same, address
the issue by restoring the prior error code in the above scenario.
Note that the only other ULP performing similar checks at init
time - smc_ulp_ops - also fails with ENOTCONN when trying to attach
the ULP to a non-established socket.
Reported-by: Sabrina Dubroca <[email protected]>
Fixes: 2c02d41d71f9 ("net/ulp: prevent ULP without clone op from entering the LISTEN status")
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Link: https://lore.kernel.org/r/7bb199e7a93317fb6f8bf8b9b2dc71c18f337cde.1674042685.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In test_async_probe_init, second set of asynchronous devices are saved
in sync_dev[sync_id], which should be async_dev[async_id].
This makes these devices not unregistered when exit.
> modprobe test_async_driver_probe && \
> modprobe -r test_async_driver_probe && \
> modprobe test_async_driver_probe
...
> sysfs: cannot create duplicate filename '/devices/platform/test_async_driver.4'
> kobject_add_internal failed for test_async_driver.4 with -EEXIST,
don't try to register things with the same name in the same directory.
Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity")
Signed-off-by: Chen Zhongjin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
I got the following WARNING message while removing driver(ds2482):
------------[ cut here ]------------
do not call blocking ops when !TASK_RUNNING; state=1 set at [<000000002d50bfb6>] w1_process+0x9e/0x1d0 [wire]
WARNING: CPU: 0 PID: 262 at kernel/sched/core.c:9817 __might_sleep+0x98/0xa0
CPU: 0 PID: 262 Comm: w1_bus_master1 Tainted: G N 6.1.0-rc3+ #307
RIP: 0010:__might_sleep+0x98/0xa0
Call Trace:
exit_signals+0x6c/0x550
do_exit+0x2b4/0x17e0
kthread_exit+0x52/0x60
kthread+0x16d/0x1e0
ret_from_fork+0x1f/0x30
The state of task is set to TASK_INTERRUPTIBLE in loop in w1_process(),
set it to TASK_RUNNING when it breaks out of the loop to avoid the
warning.
Fixes: 3c52e4e62789 ("W1: w1_process, block or sleep")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
I got a deadloop report while doing device(ds2482) add/remove test:
[ 162.241881] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 163.272251] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
[ 164.296157] w1_master_driver w1_bus_master1: Waiting for w1_bus_master1 to become free: refcnt=1.
...
__w1_remove_master_device() can't return, because the dev->refcnt is not zero.
w1_add_master_device() |
w1_alloc_dev() |
atomic_set(&dev->refcnt, 2) |
kthread_run() |
|__w1_remove_master_device()
| kthread_stop()
// KTHREAD_SHOULD_STOP is set, |
// threadfn(w1_process) won't be |
// called. |
kthread() |
| // refcnt will never be 0, it's deadloop.
| while (atomic_read(&dev->refcnt)) {...}
After calling w1_add_master_device(), w1_process() is not really
invoked, before w1_process() starting, if kthread_stop() is called
in __w1_remove_master_device(), w1_process() will never be called,
the refcnt can not be decreased, then it causes deadloop in remove
function because of non-zero refcnt.
We need to make sure w1_process() is really started, so move the
set refcnt into w1_process() to fix this problem.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
(Actually, this is fixing the "Read the Current Status" command sent to
the device's outgoing mailbox, but it is only currently used for the PWM
instructions.)
The PCI-1760 is operated mostly by sending commands to a set of Outgoing
Mailbox registers, waiting for the command to complete, and reading the
result from the Incoming Mailbox registers. One of these commands is
the "Read the Current Status" command. The number of this command is
0x07 (see the User's Manual for the PCI-1760 at
<https://advdownload.advantech.com/productfile/Downloadfile2/1-11P6653/PCI-1760.pdf>.
The `PCI1760_CMD_GET_STATUS` macro defined in the driver should expand
to this command number 0x07, but unfortunately it currently expands to
0x03. (Command number 0x03 is not defined in the User's Manual.)
Correct the definition of the `PCI1760_CMD_GET_STATUS` macro to fix it.
This is used by all the PWM subdevice related instructions handled by
`pci1760_pwm_insn_config()` which are probably all broken. The effect
of sending the undefined command number 0x03 is not known.
Fixes: 14b93bb6bbf0 ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Cc: <[email protected]> # v4.5+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In preparation for needing them somewhere else, move them and get rid of
the unused 'issue_flags' for the unlock side.
No functional changes in this patch.
Signed-off-by: Jens Axboe <[email protected]>
|
|
When -Woverride-init is enabled in a build, gcc points out that
qcom_geni_serial_pm_ops contains conflicting initializers:
drivers/tty/serial/qcom_geni_serial.c:1586:20: error: initialized field overwritten [-Werror=override-init]
1586 | .restore = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/tty/serial/qcom_geni_serial.c:1586:20: note: (near initialization for 'qcom_geni_serial_pm_ops.restore')
drivers/tty/serial/qcom_geni_serial.c:1587:17: error: initialized field overwritten [-Werror=override-init]
1587 | .thaw = qcom_geni_serial_sys_hib_resume,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Open-code the initializers with the version that was already used,
and use the pm_sleep_ptr() method to deal with unused ones,
in place of the __maybe_unused annotation.
Fixes: 35781d8356a2 ("tty: serial: qcom-geni-serial: Add support for Hibernation feature")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit ba47f97a18f2 ("serial: core: remove baud_rates when serial console
setup") changed uart_set_options to select the correct baudrate
configuration based on the absolute error between requested baudrate and
available standard baudrate settings.
Prior to that commit the baudrate was selected based on which predefined
standard baudrate did not exceed the requested baudrate.
This change of selection logic was never reflected in the atmel serial
driver. Thus the comment left in the atmel serial driver is no longer
accurate.
Additionally the manual rounding up described in that comment and applied
via (quot - 1) requests an incorrect baudrate. Since uart_set_options uses
tty_termios_encode_baud_rate to determine the appropriate baudrate flags
this can cause baudrate selection to fail entirely because
tty_termios_encode_baud_rate will only select a baudrate if relative error
between requested and selected baudrate does not exceed +/-2%.
Fix that by requesting actual, exact baudrate used by the serial.
Fixes: ba47f97a18f2 ("serial: core: remove baud_rates when serial console setup")
Cc: stable <[email protected]>
Signed-off-by: Tobias Schramm <[email protected]>
Acked-by: Richard Genoud <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Run the following tests on the qemu platform:
syzkaller:~# modprobe speakup_audptr
input: Speakup as /devices/virtual/input/input4
initialized device: /dev/synth, node (MAJOR 10, MINOR 125)
speakup 3.1.6: initialized
synth name on entry is: (null)
synth probe
spk_ttyio_initialise_ldisc failed because tty_kopen_exclusive returned
failed (errno -16), then remove the module, we will get a null-ptr-defer
problem, as follow:
syzkaller:~# modprobe -r speakup_audptr
releasing synth audptr
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 2 PID: 204 Comm: modprobe Not tainted 6.1.0-rc6-dirty #1
RIP: 0010:mutex_lock+0x14/0x30
Call Trace:
<TASK>
spk_ttyio_release+0x19/0x70 [speakup]
synth_release.part.6+0xac/0xc0 [speakup]
synth_remove+0x56/0x60 [speakup]
__x64_sys_delete_module+0x156/0x250
? fpregs_assert_state_consistent+0x1d/0x50
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Modules linked in: speakup_audptr(-) speakup
Dumping ftrace buffer:
in_synth->dev was not initialized during modprobe, so we add check
for in_synth->dev to fix this bug.
Fixes: 4f2a81f3a882 ("speakup: Reference synth from tty and tty from synth")
Cc: stable <[email protected]>
Signed-off-by: Gaosheng Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Samuel Thibault <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-01-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net: mlx5: eliminate anonymous module_init & module_exit
net/mlx5: E-switch, Fix switchdev mode after devlink reload
net/mlx5e: Protect global IPsec ASO
net/mlx5e: Remove optimization which prevented update of ESN state
net/mlx5e: Set decap action based on attr for sample
net/mlx5e: QoS, Fix wrongfully setting parent_element_id on MODIFY_SCHEDULING_ELEMENT
net/mlx5: E-switch, Fix setting of reserved fields on MODIFY_SCHEDULING_ELEMENT
net/mlx5e: Remove redundant xsk pointer check in mlx5e_mpwrq_validate_xsk
net/mlx5e: Avoid false lock dependency warning on tc_ht even more
net/mlx5: fix missing mutex_unlock in mlx5_fw_fatal_reporter_err_work()
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Paolo Abeni <[email protected]>
|
|
|
|
Requesting an interrupt with IRQF_ONESHOT will run the primary handler
in the hard-IRQ context even in the force-threaded mode. The
force-threaded mode is used by PREEMPT_RT in order to avoid acquiring
sleeping locks (spinlock_t) in hard-IRQ context. This combination
makes it impossible and leads to "sleeping while atomic" warnings.
Use one interrupt handler for both handlers (primary and secondary)
and drop the IRQF_ONESHOT flag which is not needed.
Fixes: e359b4411c283 ("serial: stm32: fix threaded interrupt handling")
Reviewed-by: Sebastian Andrzej Siewior <[email protected]>
Tested-by: Valentin Caron <[email protected]> # V3
Signed-off-by: Marek Vasut <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In RS485 mode the transmission of a high priority character fails since it
is written to the data register before the transmitter is enabled. Fix this
in pl011_tx_chars() by enabling RS485 transmission before writing the
character.
Fixes: 8d479237727c ("serial: amba-pl011: add RS485 support")
Cc: [email protected]
Signed-off-by: Lino Sanfilippo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A local variable sg is used to store scatterlist pointer in
pch_dma_tx_complete(). The for loop doing Tx byte accounting before
dma_unmap_sg() alters sg in its increment statement. Therefore, the
pointer passed into dma_unmap_sg() won't match to the one given to
dma_map_sg().
To fix the problem, use priv->sg_tx_p directly in dma_unmap_sg()
instead of the local variable.
Fixes: da3564ee027e ("pch_uart: add multi-scatter processing")
Cc: [email protected]
Signed-off-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Driver's probe allocates memory for RX FIFO (port->rx_fifo) based on
default RX FIFO depth, e.g. 16. Later during serial startup the
qcom_geni_serial_port_setup() updates the RX FIFO depth
(port->rx_fifo_depth) to match real device capabilities, e.g. to 32.
The RX UART handle code will read "port->rx_fifo_depth" number of words
into "port->rx_fifo" buffer, thus exceeding the bounds. This can be
observed in certain configurations with Qualcomm Bluetooth HCI UART
device and KASAN:
Bluetooth: hci0: QCA Product ID :0x00000010
Bluetooth: hci0: QCA SOC Version :0x400a0200
Bluetooth: hci0: QCA ROM Version :0x00000200
Bluetooth: hci0: QCA Patch Version:0x00000d2b
Bluetooth: hci0: QCA controller version 0x02000200
Bluetooth: hci0: QCA Downloading qca/htbtfw20.tlv
bluetooth hci0: Direct firmware load for qca/htbtfw20.tlv failed with error -2
Bluetooth: hci0: QCA Failed to request file: qca/htbtfw20.tlv (-2)
Bluetooth: hci0: QCA Failed to download patch (-2)
==================================================================
BUG: KASAN: slab-out-of-bounds in handle_rx_uart+0xa8/0x18c
Write of size 4 at addr ffff279347d578c0 by task swapper/0/0
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rt5-00350-gb2450b7e00be-dirty #26
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xe0/0xf0
show_stack+0x18/0x40
dump_stack_lvl+0x8c/0xb8
print_report+0x188/0x488
kasan_report+0xb4/0x100
__asan_store4+0x80/0xa4
handle_rx_uart+0xa8/0x18c
qcom_geni_serial_handle_rx+0x84/0x9c
qcom_geni_serial_isr+0x24c/0x760
__handle_irq_event_percpu+0x108/0x500
handle_irq_event+0x6c/0x110
handle_fasteoi_irq+0x138/0x2cc
generic_handle_domain_irq+0x48/0x64
If the RX FIFO depth changes after probe, be sure to resize the buffer.
Fixes: f9d690b6ece7 ("tty: serial: qcom_geni_serial: Allocate port->rx_fifo buffer in probe")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The 'parent' returned by fwnode_graph_get_port_parent()
with refcount incremented when 'prev' is not NULL, it
needs be put when finish using it.
Because the parent is const, introduce a new variable to
store the returned fwnode, then put it before returning
from fwnode_graph_get_next_endpoint().
Fixes: b5b41ab6b0c1 ("device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Sakari Ailus <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-and-tested-by: Daniel Scally <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The interrupt handler (pt_core_irq_handler()) of the ptdma
driver can be called from interrupt context. The code flow
in this function can lead down to pt_core_execute_cmd() which
will attempt to grab a mutex, which is not appropriate in
interrupt context and ultimately leads to a kernel panic.
The fix here changes this mutex to a spinlock, which has
been verified to resolve the issue.
Fixes: fa5d823b16a9 ("dmaengine: ptdma: Initial driver for the AMD PTDMA")
Signed-off-by: Eric Pilmore <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The dwc3 core support now links against the extcon subsystem,
so it cannot be built-in when extcon is a loadable module:
arm-linux-gnueabi-ld: drivers/usb/dwc3/core.o: in function `dwc3_get_extcon':
core.c:(.text+0x572): undefined reference to `extcon_get_edev_by_phandle'
arm-linux-gnueabi-ld: core.c:(.text+0x596): undefined reference to `extcon_get_extcon_dev'
arm-linux-gnueabi-ld: core.c:(.text+0x5ea): undefined reference to `extcon_find_edev_by_node'
There was already a Kconfig dependency in the dual-role support,
but this is now needed for the entire dwc3 driver.
It is still possible to build dwc3 without extcon, but this
prevents it from being set to built-in when extcon is a loadable
module.
Fixes: d182c2e1bc92 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The commit 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura
free") uses the get/put_cpu() to protect the usage of percpu pointer
in ->aura_freeptr() callback, but it also unnecessarily disable the
preemption for the blockable memory allocation. The commit 87b93b678e95
("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to
fix these sleep inside atomic warnings. But it only fix the one for
the non-rt kernel. For the rt kernel, we still get the similar warnings
like below.
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
3 locks held by swapper/0/1:
#0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30
#1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4
#2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac
Preemption disabled at:
[<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284
CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1
Hardware name: Marvell OcteonTX CN96XX board (DT)
Call trace:
dump_backtrace.part.0+0xe8/0xf4
show_stack+0x20/0x30
dump_stack_lvl+0x9c/0xd8
dump_stack+0x18/0x34
__might_resched+0x188/0x224
rt_spin_lock+0x64/0x110
alloc_iova_fast+0x1ac/0x2ac
iommu_dma_alloc_iova+0xd4/0x110
__iommu_dma_map+0x80/0x144
iommu_dma_map_page+0xe8/0x260
dma_map_page_attrs+0xb4/0xc0
__otx2_alloc_rbuf+0x90/0x150
otx2_rq_aura_pool_init+0x1c8/0x284
otx2_init_hw_resources+0xe4/0x3a4
otx2_open+0xf0/0x610
__dev_open+0x104/0x224
__dev_change_flags+0x1e4/0x274
dev_change_flags+0x2c/0x7c
ic_open_devs+0x124/0x2f8
ip_auto_config+0x180/0x42c
do_one_initcall+0x90/0x4dc
do_basic_setup+0x10c/0x14c
kernel_init_freeable+0x10c/0x13c
kernel_init+0x2c/0x140
ret_from_fork+0x10/0x20
Of course, we can shuffle the get/put_cpu() to only wrap the invocation
of ->aura_freeptr() as what commit 87b93b678e95 does. But there are only
two ->aura_freeptr() callbacks, otx2_aura_freeptr() and
cn10k_aura_freeptr(). There is no usage of perpcu variable in the
otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it.
We can move the get/put_cpu() into the corresponding callback which
really has the percpu variable usage and avoid the sprinkling of
get/put_cpu() in several places.
Fixes: 4af1b64f80fb ("octeontx2-pf: Fix lmtst ID used in aura free")
Signed-off-by: Kevin Hao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
While one cpu is working on looking up the right socket from ehash
table, another cpu is done deleting the request socket and is about
to add (or is adding) the big socket from the table. It means that
we could miss both of them, even though it has little chance.
Let me draw a call trace map of the server side.
CPU 0 CPU 1
----- -----
tcp_v4_rcv() syn_recv_sock()
inet_ehash_insert()
-> sk_nulls_del_node_init_rcu(osk)
__inet_lookup_established()
-> __sk_nulls_add_node_rcu(sk, list)
Notice that the CPU 0 is receiving the data after the final ack
during 3-way shakehands and CPU 1 is still handling the final ack.
Why could this be a real problem?
This case is happening only when the final ack and the first data
receiving by different CPUs. Then the server receiving data with
ACK flag tries to search one proper established socket from ehash
table, but apparently it fails as my map shows above. After that,
the server fetches a listener socket and then sends a RST because
it finds a ACK flag in the skb (data), which obeys RST definition
in RFC 793.
Besides, Eric pointed out there's one more race condition where it
handles tw socket hashdance. Only by adding to the tail of the list
before deleting the old one can we avoid the race if the reader has
already begun the bucket traversal and it would possibly miss the head.
Many thanks to Eric for great help from beginning to end.
Fixes: 5e0724d027f0 ("tcp/dccp: fix hashdance race for passive sessions")
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The EDAC drivers may optionally pass the poll_msec value. Use that value
if available, else fall back to 1000ms.
[ bp: Touchups. ]
Fixes: e27e3dac6517 ("drivers/edac: add edac_device class")
Reported-by: Luca Weiss <[email protected]>
Signed-off-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Tested-by: Steev Klimaszewski <[email protected]> # Thinkpad X13s
Tested-by: Andrew Halaney <[email protected]> # sa8540p-ride
Cc: <[email protected]> # 4.9
Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso
|
|
Polling the completion can progress the request state to IDLE, either
inline with the completion, or through softirq. Either way, the state
may not be COMPLETED, so don't check for that. We only care if the state
isn't IN_FLIGHT.
This is fixing an issue where the driver aborts an IO that we just
completed. Seeing the "aborting" message instead of "polled" is very
misleading as to where the timeout problem resides.
Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq")
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
NVMe controller register access hangs indefinitely when the co-processor
is not running. A missed reset is preferable over a hanging thread since
it could be recoverable.
Signed-off-by: Janne Grunau <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
This is a functional revert of c76b8308e4c9 ("nvme-apple: fix controller
shutdown in apple_nvme_disable").
The commit broke suspend/resume since apple_nvme_reset_work() tries to
disable the controller on resume. This does not work for the apple NVMe
controller since register access only works while the co-processor
firmware is running.
Disabling the NVMe controller in the shutdown path is also required
for shutting the co-processor down. The original code was appropriate
for this hardware. Add a comment to prevent a similar breaking changes
in the future.
Fixes: c76b8308e4c9 ("nvme-apple: fix controller shutdown in apple_nvme_disable")
Reported-by: Janne Grunau <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Janne Grunau <[email protected]>
[hch: updated with a more descriptive comment from Hector Martin]
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
This reverts commit 0aa64df30b382fc71d4fb1827d528e0eb3eff854.
Currently IFF_NO_ADDRCONF is used to prevent all ipv6 addrconf for the
slave ports of team, bonding and failover devices and it means no ipv6
packets can be sent out through these slave ports. However, for team
device, "nsna_ping" link_watch requires ipv6 addrconf. Otherwise, the
link will be marked failure. This patch removes the IFF_NO_ADDRCONF
flag set for team port, and we will fix the original issue in another
patch, as Jakub suggested.
Fixes: 0aa64df30b38 ("net: team: use IFF_NO_ADDRCONF flag to prevent ipv6 addrconf")
Signed-off-by: Xin Long <[email protected]>
Link: https://lore.kernel.org/r/63e09531fc47963d2e4eff376653d3db21b97058.1673980932.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We often have to ping Willem asking for reviews of patches
because he doesn't get included in the CC list. Add MAINTAINERS
entries for some of the areas he covers so that ./scripts/ will
know to add him.
Acked-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Naresh reports seeing a warning that gred is calling
u64_stats_update_begin() with preemption enabled.
Arnd points out it's coming from _bstats_update().
We should be holding the qdisc lock when writing
to stats, they are also updated from the datapath.
Reported-by: Linux Kernel Functional Testing <[email protected]>
Link: https://lore.kernel.org/all/CA+G9fYsTr9_r893+62u6UGD3dVaCE-kN9C-Apmb2m=hxjc1Cqg@mail.gmail.com/
Fixes: e49efd5288bd ("net: sched: gred: support reporting stats from offloads")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Cc: [email protected]
Cc: [email protected]
Acked-by: Christian König <[email protected]>
Reviewed-by: Roman Li <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.1.x
|
|
Causes flickering or white screens in some configurations.
Disable it for now until we can fix the issue.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Cc: [email protected]
Cc: [email protected]
Acked-by: Christian König <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.1.x
|