| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "mm: Avoid possible overflows in dirty throttling".
Dirty throttling logic assumes dirty limits in page units fit into
32-bits. This patch series makes sure this is true (see patch 2/2 for
more details).
This patch (of 2):
This reverts commit 9319b647902cbd5cc884ac08a8a6d54ce111fc78.
The commit is broken in several ways. Firstly, the removed (u64) cast
from the multiplication will introduce a multiplication overflow on 32-bit
archs if wb_thresh * bg_thresh >= 1<<32 (which is actually common - the
default settings with 4GB of RAM will trigger this). Secondly, the
div64_u64() is unnecessarily expensive on 32-bit archs. We have
div64_ul() in case we want to be safe & cheap. Thirdly, if dirty
thresholds are larger than 1<<32 pages, then dirty balancing is going to
blow up in many other spectacular ways anyway so trying to fix one
possible overflow is just moot.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 9319b647902c ("mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again")
Signed-off-by: Jan Kara <[email protected]>
Reviewed-By: Zach O'Keefe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When mm_update_owner_next() is racing with swapoff (try_to_unuse()) or
/proc or ptrace or page migration (get_task_mm()), it is impossible to
find an appropriate task_struct in the loop whose mm_struct is the same as
the target mm_struct.
If the above race condition is combined with the stress-ng-zombie and
stress-ng-dup tests, such a long loop can easily cause a Hard Lockup in
write_lock_irq() for tasklist_lock.
Recognize this situation in advance and exit early.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Jinliang Zheng <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Mateusz Guzik <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Tycho Andersen <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Pull io_uring fix from Jens Axboe:
"A fix for a feature that went into the 6.10 merge window actually
ended up causing a regression in building bundles for receives.
Fix that up by ensuring we don't overwrite msg_inq before we use
it in the loop"
* tag 'io_uring-6.10-20240703' of git://git.kernel.dk/linux:
io_uring/net: don't clear msg_inq before io_recv_buf_select() needs it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some fixes related to the IPU6 driver"
* tag 'media/v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ivsc: Depend on IPU_BRIDGE or not IPU_BRIDGE
media: intel/ipu6: Fix a null pointer dereference in ipu6_isys_query_stream_by_source
media: ipu6: Use the ISYS auxdev device as the V4L2 device's device
|
|
Fix invalid dereferencing of indirect CCW data pointer in
dasd_eckd_dump_sense() that leads to a kernel panic in error cases.
When using indirect addressing for DASD CCWs (IDAW) the CCW CDA pointer
does not contain the data address itself but a pointer to the IDAL.
This needs to be translated from physical to virtual as well before
using it.
This dereferencing is also used for dasd_page_cache and also fixed
although it is very unlikely that this code path ever gets used.
Fixes: c0bd39601c13 ("s390/dasd: use new address translation helpers")
Cc: [email protected]
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
iwl_mvm_get_bss_vif might return a NULL or ERR_PTR. Some of the callers
check only the NULL case, and some doesn't check at all.
Some of the callers even have a pointer to the mvmvif of the bss vif,
so we don't even need to call this function, and can simply get the vif
from mvmvif. Do it for those cases, and for the others - properly check
if IS_ERR_OR_NULL
Fixes: ec0d43d26f2c ("wifi: iwlwifi: mvm: Activate EMLSR based on traffic volume")
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703064027.a661f8c65aac.I45cf09b01af8ee3d55828863958ead741ea43b7f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
We already iterate the link bss_conf/link_info and have the
pointer, or know that deflink/bss_conf is used, so avoid an
extra lookup and just pass the pointer. This may also avoid
a crash when this is processed during restart, where the FW
to link conf array (link_id_to_link_conf) may be NULLed out.
Fixes: c1e458b987f2 ("wifi: iwlwifi: mvm: Move beacon filtering to be per link")
Signed-off-by: Johannes Berg <[email protected]>
Reviewed-by: Ilan Peer <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703064026.346a6ef67a86.Iba5d65d728ca9f58518c88d029496c1250670544@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Since we now want to sync the queues even when we're in RFKILL, we
shouldn't wake up the wait queue since we still expect to get all the
notifications from the firmware.
Fixes: 4d08c0b3357c ("wifi: iwlwifi: mvm: handle BA session teardown in RF-kill")
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703064027.be7a9dbeacde.I5586cb3ca8d6e44f79d819a48a0c22351ff720c9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The WIPHY_FLAG_SUPPORTS_EXT_KEK_KCK should be set based on the
WOWLAN_KEK_KCK_MATERIAL command version. Currently, the command
version in the firmware has advanced to 4, which prevents the
flag from being set correctly, fix that.
Signed-off-by: Daniel Gabay <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703064026.a0f162108575.If1a9785727d2a1b0197a396680965df1b53d4096@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Commit 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
made sure that the IEs data was manipulated under the relevant RCU section.
Unfortunately, while doing so, the commit brought a faulty implicit cast
from int to u8 on the ies_len variable, making the parsing fail to be
performed correctly if the IEs block is larger than 255 bytes. This failure
can be observed with Access Points appending a lot of IEs TLVs in their
beacon frames (reproduced with a Pixel phone acting as an Access Point,
which brough 273 bytes of IE data in my testing environment).
Fix IEs parsing by removing this undesired implicit cast.
Fixes: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jozef Hopko <[email protected]>
Signed-off-by: Alexis Lothoré <[email protected]>
Acked-by: Ajay Singh <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
bgpio_bits must be aligned with the data bus width. For example, on a
32 bit big endian system and we only have 16 GPIOs. If we only assume
bgpio_bits=16 we can never control the GPIO because the base address
is the lowest address.
low address high address
-------------------------------------------------
| byte3 | byte2 | byte1 | byte0 |
-------------------------------------------------
| NaN | NaN | gpio8-15 | gpio0-7 |
-------------------------------------------------
Fixes: 55b2395e4e92 ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Fixes: https://github.com/openwrt/openwrt/issues/15739
Reported-by: Mark Mentovai <[email protected]>
Signed-off-by: Shiji Yang <[email protected]>
Suggested-By: Mark Mentovai <[email protected]>
Reviewed-by: Jonas Gorski <[email protected]>
Tested-by: Lóránd Horváth <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/TYCP286MB089577B47D70F0AB25ABA6F5BCD52@TYCP286MB0895.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
The processing of a Transfer-In-Channel (TIC) CCW requires locating
the target of the CCW in the channel program, and updating the
address to reflect what will actually be sent to hardware.
An error exists where the 64-bit virtual address is truncated to
32-bits (variable "cda") when performing this math. Since s390
addresses of that size are 31-bits, this leaves that additional
bit enabled such that the resulting I/O triggers a channel
program check. This shows up occasionally when booting a KVM
guest from a passthrough DASD device:
..snip...
Interrupt Response Block Data:
: 0x0000000000003990
Function Ctrl : [Start]
Activity Ctrl :
Status Ctrl : [Alert] [Primary] [Secondary] [Status-Pending]
Device Status :
Channel Status : [Program-Check]
cpa=: 0x00000000008d0018
prev_ccw=: 0x0000000000000000
this_ccw=: 0x0000000000000000
...snip...
dasd-ipl: Failed to run IPL1 channel program
The channel program address of "0x008d0018" in the IRB doesn't
look wrong, but tracing the CCWs shows the offending bit enabled:
ccw=0x0000012e808d0000 cda=00a0b030
ccw=0x0000012e808d0008 cda=00a0b038
ccw=0x0000012e808d0010 cda=808d0008
ccw=0x0000012e808d0018 cda=00a0b040
Fix the calculation of the TIC CCW's data address such that it points
to a valid 31-bit address regardless of the input address.
Fixes: bd36cfbbb9e1 ("s390/vfio_ccw_cp: use new address translation helpers")
Signed-off-by: Eric Farman <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Commit 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN
stripping") enables MAC level VLAN tag stripping for all MAC cores, but
leaves set_hw_vlan_mode() and rx_hw_vlan() un-implemented for both gmac
and xgmac.
On gmac and xgmac, ethtool reports rx-vlan-offload is on, both MAC and
driver do nothing about VLAN packets actually, although VLAN works well.
Driver level stripping should be used on gmac and xgmac for now.
Fixes: 750011e239a5 ("net: stmmac: Add support for HW-accelerated VLAN stripping")
Signed-off-by: Furong Xu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Starting with kernel 6.7, the framebuffer text console is not working
anymore with the virtio-gpu device on s390x hosts. Such big endian fb
devices are usinga different pixel ordering than little endian devices,
e.g. DRM_FORMAT_BGRX8888 instead of DRM_FORMAT_XRGB8888.
This used to work fine as long as drm_client_buffer_addfb() was still
calling drm_mode_addfb() which called drm_driver_legacy_fb_format()
internally to get the right format. But drm_client_buffer_addfb() has
recently been reworked to call drm_mode_addfb2() instead with the
format value that has been passed to it as a parameter (see commit
6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()").
That format parameter is determined in drm_fbdev_generic_helper_fb_probe()
via the drm_mode_legacy_fb_format() function - which only generates
formats suitable for little endian devices. So to fix this issue
switch to drm_driver_legacy_fb_format() here instead to take the
device endianness into consideration.
Fixes: 6ae2ff23aa43 ("drm/client: Convert drm_client_buffer_addfb() to drm_mode_addfb2()")
Closes: https://issues.redhat.com/browse/RHEL-45158
Signed-off-by: Thomas Huth <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Acked-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
A sync-only job is meant to provide a synchronization point on a
queue, so we can't return a NULL fence there, we have to add a signal
operation to the command stream which executes after all other
previously submitted jobs are done.
v2:
- Fixed a UAF bug
- Added R-bs
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The user is likely to leave all the drm_panthor_obj_array fields
to zero when the array is empty, which will cause an EINVAL failure.
v2:
- Added R-bs
Fixes: 4bdca1150792 ("drm/panthor: Add the driver frontend block")
Signed-off-by: Boris Brezillon <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
cifs_expand_read() is causing a performance regression of around 30% by
causing extra pagecache to be allocated for an inode in the readahead path
before we begin actually dispatching RPC requests, thereby delaying the
actual I/O. The expansion is sized according to the rsize parameter, which
seems to be 4MiB on my test system; this is a big step up from the first
requests made by the fio test program.
Simple repro (look at read bandwidth number):
fio --name=writetest --filename=/xfstest.test/foo --time_based --runtime=60 --size=16M --numjobs=1 --rw=read
Fix this by removing cifs_expand_readahead(). Readahead expansion is
mostly useful for when we're using the local cache if the local cache has a
block size greater than PAGE_SIZE, so we can dispense with it when not
caching.
Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks")
Signed-off-by: David Howells <[email protected]>
Acked-by: Paulo Alcantara (Red Hat) <[email protected]>
cc: Jeff Layton <[email protected]>
cc: Matthew Wilcox <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Signed-off-by: Steve French <[email protected]>
|
|
__netif_rx()
The following is emitted when using idxd (DSA) dmanegine as the data
mover for ntb_transport that ntb_netdev uses.
[74412.546922] BUG: using smp_processor_id() in preemptible [00000000] code: irq/52-idxd-por/14526
[74412.556784] caller is netif_rx_internal+0x42/0x130
[74412.562282] CPU: 6 PID: 14526 Comm: irq/52-idxd-por Not tainted 6.9.5 #5
[74412.569870] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.E9I.1752.P05.2402080856 02/08/2024
[74412.581699] Call Trace:
[74412.584514] <TASK>
[74412.586933] dump_stack_lvl+0x55/0x70
[74412.591129] check_preemption_disabled+0xc8/0xf0
[74412.596374] netif_rx_internal+0x42/0x130
[74412.600957] __netif_rx+0x20/0xd0
[74412.604743] ntb_netdev_rx_handler+0x66/0x150 [ntb_netdev]
[74412.610985] ntb_complete_rxc+0xed/0x140 [ntb_transport]
[74412.617010] ntb_rx_copy_callback+0x53/0x80 [ntb_transport]
[74412.623332] idxd_dma_complete_txd+0xe3/0x160 [idxd]
[74412.628963] idxd_wq_thread+0x1a6/0x2b0 [idxd]
[74412.634046] irq_thread_fn+0x21/0x60
[74412.638134] ? irq_thread+0xa8/0x290
[74412.642218] irq_thread+0x1a0/0x290
[74412.646212] ? __pfx_irq_thread_fn+0x10/0x10
[74412.651071] ? __pfx_irq_thread_dtor+0x10/0x10
[74412.656117] ? __pfx_irq_thread+0x10/0x10
[74412.660686] kthread+0x100/0x130
[74412.664384] ? __pfx_kthread+0x10/0x10
[74412.668639] ret_from_fork+0x31/0x50
[74412.672716] ? __pfx_kthread+0x10/0x10
[74412.676978] ret_from_fork_asm+0x1a/0x30
[74412.681457] </TASK>
The cause is due to the idxd driver interrupt completion handler uses
threaded interrupt and the threaded handler is not hard or soft interrupt
context. However __netif_rx() can only be called from interrupt context.
Change the call to netif_rx() in order to allow completion via normal
context for dmaengine drivers that utilize threaded irq handling.
While the following commit changed from netif_rx() to __netif_rx(),
baebdf48c360 ("net: dev: Makes sure netif_rx() can be invoked in any context."),
the change should've been a noop instead. However, the code precedes this
fix should've been using netif_rx_ni() or netif_rx_any_context().
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Reported-by: Jerry Dai <[email protected]>
Tested-by: Jerry Dai <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The header is missing the include guards so add them.
Reviewed-by: Andrew Lunn <[email protected]>
Fixes: fb470f70fea7 ("net: phy: aquantia: add hwmon support")
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is a variable sized array.
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/110420.html
Tested-by: Jeff Layton <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"One single patch to fix the non-contiguous CBM resctrl:
- AMD supports non-contiguous CBM but does not report it via CPUID.
This test should not use CPUID on AMD to detect non-contiguous CBM
support. Fix the problem so the test uses CPUID to discover
non-contiguous CBM support only on Intel"
* tag 'linux_kselftest-fixes-6.10-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/resctrl: Fix non-contiguous CBM for AMD
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- Improve handling of deep ancestor chains in is_subdir()
- Release locks cleanly when fctnl_setlk() races with close().
When setting a file lock fails the VFS tries to cleanup the already
created lock. The helper used for this calls back into the LSM
layer which may cause it to fail, leaving the stale lock accessible
via /proc/locks.
AFS:
- Fix a comma/semicolon typo"
* tag 'vfs-6.10-rc7.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
afs: Convert comma to semicolon
fs: better handle deep ancestor chains in is_subdir()
filelock: Remove locks reliably when fcntl/close race is detected
|
|
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Acked-by: David Howells <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Jan reported that 'cd ..' may take a long time in deep directory
hierarchies under a bind-mount. If concurrent renames happen it is
possible to livelock in is_subdir() because it will keep retrying.
Change is_subdir() from simply retrying over and over to retry once and
then acquire the rename lock to handle deep ancestor chains better. The
list of alternatives to this approach were less then pleasant. Change
the scope of rcu lock to cover the whole walk while at it.
A big thanks to Jan and Linus. Both Jan and Linus had proposed
effectively the same thing just that one version ended up being slightly
more elegant.
Reported-by: Jan Kara <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
- Correct the Stromer Plus PLL set_rate to explicitly set ALPHA_EN bit and
remove unnecessary upper parts of CONFIG_CTL values.
- Mark the recently added IPQ9574 GCC crypto clocks BRANCH_HALT_VOTED, to
address stuck clock warnings.
- Fix the GPLL6 and GPLL7 parents on SM6350 to avoid issues with these
reportedly running at ~25GHz.
* tag 'qcom-clk-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: gcc-ipq9574: Add BRANCH_HALT_VOTED flag
clk: qcom: apss-ipq-pll: remove 'config_ctl_hi_val' from Stromer pll configs
clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
clk: qcom: gcc-sm6350: Fix gpll6* & gpll7 parents
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"The most important one fixes possible infinite loops reported by a
smartphone vendor OPPO recently due to some unexpected zero-sized
compressed pcluster out of interrupted I/Os, storage failures, etc.
Another patch fixes global buffer memory leak on unloading, and the
remaining one switches to use super_set_uuid() to keep with the other
filesystems.
Summary:
- Fix possible global buffer memory leak when unloading EROFS module
- Fix FS_IOC_GETFSUUID ioctl by using super_set_uuid()
- Reset m_llen to 0 so then it can retry if metadata is invalid"
* tag 'erofs-for-6.10-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: ensure m_llen is reset to 0 if metadata is invalid
erofs: convert to use super_set_uuid to support for FS_IOC_GETFSUUID
erofs: fix possible memory leak in z_erofs_gbuf_exit()
|
|
Add a description of the scaling_available_frequencies attribute in
sysfs to the documentation.
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Reviewed-by: Bagas Sanjaya <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
When fcntl_setlk() races with close(), it removes the created lock with
do_lock_file_wait().
However, LSMs can allow the first do_lock_file_wait() that created the lock
while denying the second do_lock_file_wait() that tries to remove the lock.
In theory (but AFAIK not in practice), posix_lock_file() could also fail to
remove a lock due to GFP_KERNEL allocation failure (when splitting a range
in the middle).
After the bug has been triggered, use-after-free reads will occur in
lock_get_status() when userspace reads /proc/locks. This can likely be used
to read arbitrary kernel memory, but can't corrupt kernel memory.
This only affects systems with SELinux / Smack / AppArmor / BPF-LSM in
enforcing mode and only works from some security contexts.
Fix it by calling locks_remove_posix() instead, which is designed to
reliably get rid of POSIX locks associated with the given file and
files_struct and is also used by filp_flush().
Fixes: c293621bbf67 ("[PATCH] stale POSIX lock handling")
Cc: [email protected]
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2563
Signed-off-by: Jann Horn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
In the ref-verify tool, when processing the inline references of an extent
item, we may end up returning with uninitialized return value, because:
1) The 'ret' variable is not initialized if there are no inline extent
references ('ptr' == 'end' before the while loop starts);
2) If we find an extent owner inline reference we don't initialize 'ret'.
So fix these cases by initializing 'ret' to 0 when declaring the variable
and set it to -EINVAL if we find an extent owner inline references and
simple quotas are not enabled (as well as print an error message).
Reported-by: Mirsad Todorovac <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
[BUG]
Syzbot reports the following regression detected by KASAN:
BUG: KASAN: slab-out-of-bounds in btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
Read of size 8 at addr ffff88814628ca50 by task syz-executor318/5171
CPU: 0 PID: 5171 Comm: syz-executor318 Not tainted 6.10.0-rc2-syzkaller-00010-g2ab795141095 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
btrfs_qgroup_inherit+0x42e/0x2e20 fs/btrfs/qgroup.c:3277
create_pending_snapshot+0x1359/0x29b0 fs/btrfs/transaction.c:1854
create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1922
btrfs_commit_transaction+0xf20/0x3740 fs/btrfs/transaction.c:2382
create_snapshot+0x6a1/0x9e0 fs/btrfs/ioctl.c:875
btrfs_mksubvol+0x58f/0x710 fs/btrfs/ioctl.c:1029
btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1075
__btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1340
btrfs_ioctl_snap_create_v2+0x1f2/0x3a0 fs/btrfs/ioctl.c:1422
btrfs_ioctl+0x99e/0xc60
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fcbf1992509
RSP: 002b:00007fcbf1928218 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fcbf1a1f618 RCX: 00007fcbf1992509
RDX: 0000000020000280 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 00007fcbf1a1f610 R08: 00007ffea1298e97 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fcbf19eb660
R13: 00000000200002b8 R14: 00007fcbf19e60c0 R15: 0030656c69662f2e
</TASK>
And it also pinned it down to commit b5357cb268c4 ("btrfs: qgroup: do not
check qgroup inherit if qgroup is disabled").
[CAUSE]
That offending commit skips the whole qgroup inherit check if qgroup is
not enabled.
But that also skips the very basic checks like
num_ref_copies/num_excl_copies and the structure size checks.
Meaning if a qgroup enable/disable race is happening at the background,
and we pass a btrfs_qgroup_inherit structure when the qgroup is
disabled, the check would be completely skipped.
Then at the time of transaction commitment, qgroup is re-enabled and
btrfs_qgroup_inherit() is going to use the incorrect structure and
causing the above KASAN error.
[FIX]
Make btrfs_qgroup_check_inherit() only skip the source qgroup checks.
So that even if invalid btrfs_qgroup_inherit structure is passed in, we
can still reject invalid ones no matter if qgroup is enabled or not.
Furthermore we do already have an extra safety inside
btrfs_qgroup_inherit(), which would just ignore invalid qgroup sources,
so even if we only skip the qgroup source check we're still safe.
Reported-by: [email protected]
Fixes: b5357cb268c4 ("btrfs: qgroup: do not check qgroup inherit if qgroup is disabled")
Reviewed-by: Boris Burkov <[email protected]>
Reviewed-by: Jeongjun Park <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
calc_available_free_space() returns the total size of metadata (or
system) block groups, which can be allocated from unallocated disk
space. The logic is wrong on zoned mode in two places.
First, the calculation of data_chunk_size is wrong. We always allocate
one zone as one chunk, and no partial allocation of a zone. So, we
should use zone_size (= data_sinfo->chunk_size) as it is.
Second, the result "avail" may not be zone aligned. Since we always
allocate one zone as one chunk on zoned mode, returning non-zone size
aligned bytes will result in less pressure on the async metadata reclaim
process.
This is serious for the nearly full state with a large zone size device.
Allowing over-commit too much will result in less async reclaim work and
end up in ENOSPC. We can align down to the zone size to avoid that.
Fixes: cb6cbab79055 ("btrfs: adjust overcommit logic when very close to full")
CC: [email protected] # 6.9
Signed-off-by: Naohiro Aota <[email protected]>
Reviewed-by: Boris Burkov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
For bundle receives to function properly, the previous iteration msg_inq
value is needed to make a judgement call on how much data there is to
receive. A previous fix ended up clearing it earlier as an error case
would potentially errantly set IORING_CQE_F_SOCK_NONEMPTY if the request
got failed.
Move the assignment to post assigning buffers for the receive, but
ensure that it's cleared for the buffer selection error case. With that,
buffer selection has the right msg_inq value and can correctly bundle
receives as designed.
Noticed while testing where it was apparent than more than 1 buffer was
never received. After fix was in place, multiple buffers are correctly
picked for receive. This provides a 10x speedup for the test case, as
the buffer size used was 64b.
Fixes: 18414a4a2eab ("io_uring/net: assign kmsg inq/flags before buffer selection")
Signed-off-by: Jens Axboe <[email protected]>
|
|
Jiawen Wu says:
====================
net: txgbe: fix MSI and INTx interrupts
Fix MSI and INTx interrupts for txgbe driver.
changes in v3:
- Add flag wx->misc_irq_domain.
- Separate commits.
- Detail null-defer events.
changes in v2: https://lore.kernel.org/all/[email protected]
- Split into two commits.
- Detail commit description.
v1: https://lore.kernel.org/all/[email protected]
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When using MSI/INTx interrupt, the shared interrupts are still being
handled in the device remove routine, before free IRQs. So isb memory
is still read after it is freed. Thus move wx_free_isb_resources()
from txgbe_close() to txgbe_remove(). And fix the improper isb free
action in txgbe_open() error handling path.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Rename original txgbe_misc_irq_handle() to txgbe_misc_irq_thread_fn()
since it is the handle thread to wake up. And add the primary handler
to deal the case of MSI/INTx, because there is a schedule NAPI poll.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When using MSI or INTx interrupts, request_irq() for pdev->irq will
conflict with request_threaded_irq() for txgbe->misc.irq, to cause
system crash. So remove txgbe_request_irq() for MSI/INTx case, and
rename txgbe_request_msix_irqs() since it only request for queue irqs.
Add wx->misc_irq_domain to determine whether the driver creates an IRQ
domain and threaded request the IRQs.
Fixes: aefd013624a1 ("net: txgbe: use irq_domain for interrupt controller")
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized.
Thus there will be kernel panic in wx_alloc_q_vectors() to allocate
queue vectors.
Fixes: 3f703186113f ("net: libwx: Add irq flow functions")
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The global hci_hotkey_quickstart quirk flag is tested in
toshiba_acpi_enable_hotkeys() before the quirk flag is properly
initialized based on SMBIOS data. This causes the quirk to be
applied to all models, some of which behave erratically as a
result.
Fix this by initializing the global quirk flags during module
initialization before registering the ACPI driver. This also
allows us to mark toshiba_dmi_quirks[] as __initconst.
Fixes: 23f1d8b47d12 ("platform/x86: toshiba_acpi: Add quirk for buttons on Z830")
Reported-by: kemal <[email protected]>
Closes: https://lore.kernel.org/platform-driver-x86/[email protected]/
Tested-by: kemal <[email protected]>
Cc: [email protected]
Signed-off-by: Armin Wolf <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Correct member @num_por with size of right array @emac_v4_0_0_por for
struct ethqos_emac_driver_data @emac_v4_0_0_data.
Cc: [email protected]
Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms")
Signed-off-by: Yijie Yang <[email protected]>
Reviewed-by: Bartosz Golaszewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
We only use the mapping in a single context, so kmap_local is sufficient
and cheaper. Make sure to use skb_frag_foreach_page as skb frags may
contain compound pages and we need to map page by page.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Fixes: 950fcaecd5cc ("datagram: consolidate datagram copy to iter helpers")
Signed-off-by: Sagi Grimberg <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Acked-by: Alexander Gordeev <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
As it turns out, there is a large number of out-of-tree DTSes (in
OpenWrt project) that used to specify incorrect (active high) polarity
for the Lantiq reset GPIO, so to keep compatibility while they are
being updated a quirk for force the polarity low is needed. Luckily
these old DTSes used nonstandard name for the property ("gpio-reset" vs
"reset-gpios") so the quirk will not hurt if there are any new devices
that need inverted polarity as they can specify the right polarity in
their DTS when using the standard "reset-gpios" property.
Additionally the condition to enable the transition from standard to
non-standard reset GPIO property name was inverted and the replacement
name for the property was not correct. Fix this as well.
Fixes: fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings")
Fixes: 90c2d2eb7ab5 ("MIPS: pci: lantiq: switch to using gpiod API")
Reported-by: Martin Schiller <[email protected]>
Acked-by: Martin Schiller <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of error leg problems, one affecting scsi_debug and the other
affecting pure SAS (i.e. not SATA) SCSI expanders"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed
scsi: scsi_debug: Fix create target debugfs failure
|
|
On vPro systems, the configuration of the I219-LM to achieve power
gating and S0ix residency is split between the driver and the CSME FW.
It was discovered that in some scenarios, where the network cable is
connected and then disconnected, S0ix residency is not always reached.
This was root-caused to a subset of I219-LM register writes that are not
performed by the CSME FW. Therefore, the driver should perform these
register writes on corporate setups, regardless of the CSME FW state.
This was discovered on Meteor Lake systems; however it is likely to
appear on other platforms as well.
Fixes: cc23f4f0b6b9 ("e1000e: Add support for Meteor Lake")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218589
Signed-off-by: Dima Ruinskiy <[email protected]>
Signed-off-by: Vitaly Lifshits <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2024-07-01
Jimmy Assarsson's patch for the kvaser_usb adds a missing explicit
initialization of the struct kvaser_usb_driver_info::family for the
kvaser_usb_driver_info_leafimx.
* tag 'linux-can-fixes-for-6.10-20240701' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: kvaser_usb: Explicitly initialize family in leafimx driver_info struct
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The call to radeon_vm_clear_freed might clear bo_va->bo, so
we have to check it before dereferencing it.
Signed-off-by: Pierre-Eric Pelloux-Prayer <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Potential out of bounds access in dml2_calculate_rq_and_dlg_params()
because the value of out_lowest_state_idx used as an index for FCLKChangeSupport
array can be greater than 1.
[How]
Currently dml2 core specifies identical values for all FCLKChangeSupport
elements. Always use index 0 in the condition to avoid out of bounds access.
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Jerry Zuo <[email protected]>
Signed-off-by: Roman Li <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix 4k240 underflow on dcn351
Acked-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Fangzhi Zuo <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Some of the panels does not have the refresh rate range info
in base EDID and only have the refresh rate range info in
DisplayID block.
It will cause the max/min freesync refresh rate set to 0.
[How]
Try to parse the refresh rate range info from DisplayID if the
max/min refresh rate is 0.
Reviewed-by: Sun peng Li <[email protected]>
Signed-off-by: Jerry Zuo <[email protected]>
Signed-off-by: Tom Chung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
We need to ensure to take into account cursor prefetch BW in
mode support or we may pass ModeQuery but fail an actual flip
which will cause a hang. Flip may fail because the cursor_pre_bw
is populated during mode programming (and mode programming is
never called prior to ModeQuery).
Reviewed-by: Chaitanya Dhere <[email protected]>
Reviewed-by: Nevenko Stupar <[email protected]>
Signed-off-by: Jerry Zuo <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|