aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-11octeontx2-pf: Fix promisc mcam entry actionHariprasad Kelam1-3/+22
Current implementation is such that, promisc mcam entry action is set as multicast even when there are no trusted VFs. multicast action causes the hardware to copy packet data, which reduces the performance. This patch fixes this issue by setting the promisc mcam entry action to unicast instead of multicast when there are no trusted VFs. The same change is made for the 'allmulti' mcam entry action. Fixes: ffd2f89ad05c ("octeontx2-pf: Enable promisc/allmulti match MCAM entries.") Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-11octeon_ep: explicitly test for firmware ready valueShinas Rasheed1-1/+2
The firmware ready value is 1, and get firmware ready status function should explicitly test for that value. The firmware ready value read will be 2 after driver load, and on unbind till firmware rewrites the firmware ready back to 0, the value seen by driver will be 2, which should be regarded as not ready. Fixes: 10c073e40469 ("octeon_ep: defer probe if firmware not ready") Signed-off-by: Shinas Rasheed <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-11net/sched: act_ct: Take per-cb reference to tcf_ct_flow_tableVlad Buslov2-6/+38
The referenced change added custom cleanup code to act_ct to delete any callbacks registered on the parent block when deleting the tcf_ct_flow_table instance. However, the underlying issue is that the drivers don't obtain the reference to the tcf_ct_flow_table instance when registering callbacks which means that not only driver callbacks may still be on the table when deleting it but also that the driver can still have pointers to its internal nf_flowtable and can use it concurrently which results either warning in netfilter[0] or use-after-free. Fix the issue by taking a reference to the underlying struct tcf_ct_flow_table instance when registering the callback and release the reference when unregistering. Expose new API required for such reference counting by adding two new callbacks to nf_flowtable_type and implementing them for act_ct flowtable_ct type. This fixes the issue by extending the lifetime of nf_flowtable until all users have unregistered. [0]: [106170.938634] ------------[ cut here ]------------ [106170.939111] WARNING: CPU: 21 PID: 3688 at include/net/netfilter/nf_flow_table.h:262 mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.940108] Modules linked in: act_ct nf_flow_table act_mirred act_skbedit act_tunnel_key vxlan cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress mlx5_vdpa vringh vhost_iotlb vdpa bonding openvswitch nsh rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_regis try overlay mlx5_core [106170.943496] CPU: 21 PID: 3688 Comm: kworker/u48:0 Not tainted 6.6.0-rc7_for_upstream_min_debug_2023_11_01_13_02 #1 [106170.944361] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [106170.945292] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [106170.945846] RIP: 0010:mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.946413] Code: 89 ef 48 83 05 71 a4 14 00 01 e8 f4 06 04 e1 48 83 05 6c a4 14 00 01 48 83 c4 28 5b 5d 41 5c 41 5d c3 48 83 05 d1 8b 14 00 01 <0f> 0b 48 83 05 d7 8b 14 00 01 e9 96 fe ff ff 48 83 05 a2 90 14 00 [106170.947924] RSP: 0018:ffff88813ff0fcb8 EFLAGS: 00010202 [106170.948397] RAX: 0000000000000000 RBX: ffff88811eabac40 RCX: ffff88811eabad48 [106170.949040] RDX: ffff88811eab8000 RSI: ffffffffa02cd560 RDI: 0000000000000000 [106170.949679] RBP: ffff88811eab8000 R08: 0000000000000001 R09: ffffffffa0229700 [106170.950317] R10: ffff888103538fc0 R11: 0000000000000001 R12: ffff88811eabad58 [106170.950969] R13: ffff888110c01c00 R14: ffff888106b40000 R15: 0000000000000000 [106170.951616] FS: 0000000000000000(0000) GS:ffff88885fd40000(0000) knlGS:0000000000000000 [106170.952329] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [106170.952834] CR2: 00007f1cefd28cb0 CR3: 000000012181b006 CR4: 0000000000370ea0 [106170.953482] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [106170.954121] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [106170.954766] Call Trace: [106170.955057] <TASK> [106170.955315] ? __warn+0x79/0x120 [106170.955648] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.956172] ? report_bug+0x17c/0x190 [106170.956537] ? handle_bug+0x3c/0x60 [106170.956891] ? exc_invalid_op+0x14/0x70 [106170.957264] ? asm_exc_invalid_op+0x16/0x20 [106170.957666] ? mlx5_del_flow_rules+0x10/0x310 [mlx5_core] [106170.958172] ? mlx5_tc_ct_block_flow_offload_add+0x1240/0x1240 [mlx5_core] [106170.958788] ? mlx5_tc_ct_del_ft_cb+0x267/0x2b0 [mlx5_core] [106170.959339] ? mlx5_tc_ct_del_ft_cb+0xc6/0x2b0 [mlx5_core] [106170.959854] ? mapping_remove+0x154/0x1d0 [mlx5_core] [106170.960342] ? mlx5e_tc_action_miss_mapping_put+0x4f/0x80 [mlx5_core] [106170.960927] mlx5_tc_ct_delete_flow+0x76/0xc0 [mlx5_core] [106170.961441] mlx5_free_flow_attr_actions+0x13b/0x220 [mlx5_core] [106170.962001] mlx5e_tc_del_fdb_flow+0x22c/0x3b0 [mlx5_core] [106170.962524] mlx5e_tc_del_flow+0x95/0x3c0 [mlx5_core] [106170.963034] mlx5e_flow_put+0x73/0xe0 [mlx5_core] [106170.963506] mlx5e_put_flow_list+0x38/0x70 [mlx5_core] [106170.964002] mlx5e_rep_update_flows+0xec/0x290 [mlx5_core] [106170.964525] mlx5e_rep_neigh_update+0x1da/0x310 [mlx5_core] [106170.965056] process_one_work+0x13a/0x2c0 [106170.965443] worker_thread+0x2e5/0x3f0 [106170.965808] ? rescuer_thread+0x410/0x410 [106170.966192] kthread+0xc6/0xf0 [106170.966515] ? kthread_complete_and_exit+0x20/0x20 [106170.966970] ret_from_fork+0x2d/0x50 [106170.967332] ? kthread_complete_and_exit+0x20/0x20 [106170.967774] ret_from_fork_asm+0x11/0x20 [106170.970466] </TASK> [106170.970726] ---[ end trace 0000000000000000 ]--- Fixes: 77ac5e40c44e ("net/sched: act_ct: remove and free nf_table callbacks") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Paul Blakey <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-11accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initializationAndrzej Kacprowski1-3/+9
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0 workaround is problematic - there are many pre-production steppings with different behavior, even with the same PCI ID/Revision Instead of checking for PCI Device ID/Revision, check the VPU buttress interrupt status register behavior - if this register is not zero after writing 1s it means there register is RW instead of RW1C and we need to enable the interrupt_clear_with_0 workaround. Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0") Signed-off-by: Andrzej Kacprowski <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Jeffrey Hugo <[email protected]> Link: https://lore.kernel.org/all/[email protected]
2023-12-11ALSA: hda/tas2781: handle missing EFI calibration dataGergo Koteles1-2/+2
The code does not properly check whether the calibration variable is available in the EFI. If it is not available, it causes a NULL pointer dereference. Check the return value of the first get_variable call also. BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? srso_alias_return_thunk+0x5/0x7f ? schedule+0x5e/0xd0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? crc32_body+0x2c/0x120 ? tas2781_save_calibration+0xe4/0x220 [snd_hda_scodec_tas2781_i2c] tasdev_fw_ready+0x1af/0x280 [snd_hda_scodec_tas2781_i2c] request_firmware_work_func+0x59/0xa0 Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: [email protected] Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/f1f6583bda918f78556f67d522ca7b3b91cebbd5.1702251102.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2023-12-11dmaengine: idxd: Fix incorrect descriptions for GRPCFG registerGuanjun1-5/+7
Fix incorrect descriptions for the GRPCFG register which has three sub-registers (GRPWQCFG, GRPENGCFG and GRPFLGCFG). No functional changes Signed-off-by: Guanjun <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Reviewed-by: Fenghua Yu <[email protected]> Acked-by: Lijun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-12-11dmaengine: idxd: Protect int_handle field in hw descriptorGuanjun1-7/+7
The int_handle field in hw descriptor should also be protected by wmb() before possibly triggering a DMA read. Fixes: eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment) Signed-off-by: Guanjun <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Reviewed-by: Fenghua Yu <[email protected]> Reviewed-by: Lijun Pan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-12-10Linux 6.7-rc5Linus Torvalds1-1/+1
2023-12-10bcachefs: Close journal entry if necessary when flushing all pinsKent Overstreet4-4/+9
Since outstanding journal buffers hold a journal pin, when flushing all pins we need to close the current journal entry if necessary so its pin can be released. Signed-off-by: Kent Overstreet <[email protected]>
2023-12-10Merge tag 'sched_urgent_for_v6.7_rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: - Make sure tasks are thawed exactly and only once to avoid their state getting corrupted * tag 'sched_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: freezer,sched: Do not restore saved_state of a thawed task
2023-12-10Merge tag 'perf_urgent_for_v6.7_rc5' of ↵Linus Torvalds1-23/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf event fix from Borislav Petkov: - Make sure perf event size validation is done on every event in the group * tag 'perf_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix perf_event_validate_size()
2023-12-10Merge tag 'x86_urgent_for_v6.7_rc5' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add a forgotten CPU vendor check in the AMD microcode post-loading callback so that the callback runs only on AMD - Make sure SEV-ES protocol negotiation happens only once and on the BSP * tag 'x86_urgent_for_v6.7_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Check vendor in the AMD microcode callback x86/sev: Fix kernel crash due to late update to read-only ghcb_version
2023-12-10octeontx2-af: fix a use-after-free in rvu_nix_register_reportersZhipeng Lu1-4/+1
The rvu_dl will be freed in rvu_nix_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through the following call chain: rvu_nix_health_reporters_destroy |-> rvu_nix_health_reporters_create |-> rvu_health_reporters_create |-> rvu_register_dl (label err_dl_health) Finally. in the err_dl_health label, rvu_dl being freed again in rvu_health_reporters_destroy(rvu) by rvu_nix_health_reporters_destroy. In the second calls of rvu_nix_health_reporters_destroy, however, it uses rvu_dl->rvu_nix_health_reporter, which is already freed at the end of rvu_nix_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: 5ed66306eab6 ("octeontx2-af: Add devlink health reporters for NIX") Signed-off-by: Zhipeng Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-10Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds9-23/+27
Pull kvm fixes from Paolo Bonzini: "Generic: - Set .owner for various KVM file_operations so that files refcount the KVM module until KVM is done executing _all_ code, including the last few instructions of kvm_put_kvm(). And then revert the misguided attempt to rely on "struct kvm" refcounts to pin KVM-the-module. ARM: - Do not redo the mapping of vLPIs, if they have already been mapped s390: - Do not leave bits behind in PTEs - Properly catch page invalidations that affect the prefix of a nested guest x86: - When checking if a _running_ vCPU is "in-kernel", i.e. running at CPL0, get the CPL directly instead of relying on preempted_in_kernel (which is valid if and only if the vCPU was preempted, i.e. NOT running). - Fix a benign "return void" that was recently introduced. Selftests: - Makefile tweak for dependency generation - '-Wformat' fix" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Update EFER software model on CR0 trap for SEV-ES KVM: selftests: add -MP to CFLAGS KVM: selftests: Actually print out magic token in NX hugepages skip message KVM: x86: Remove 'return void' expression for 'void function' Revert "KVM: Prevent module exit until all VMs are freed" KVM: Set file_operations.owner appropriately for all such structures KVM: x86: Get CPL directly when checking if loaded vCPU is in kernel mode KVM: arm64: GICv4: Do not perform a map to a mapped vLPI KVM: s390/mm: Properly reset no-dat KVM: s390: vsie: fix wrong VIR 37 when MSO is used
2023-12-10net: fec: correct queue selectionRadu Bulie1-16/+11
The old implementation extracted VLAN TCI info from the payload before the VLAN tag has been pushed in the payload. Another problem was that the VLAN TCI was extracted even if the packet did not have VLAN protocol header. This resulted in invalid VLAN TCI and as a consequence a random queue was computed. This patch fixes the above issues and use the VLAN TCI from the skb if it is present or VLAN TCI from payload if present. If no VLAN header is present queue 0 is selected. Fixes: 52c4a1a85f4b ("net: fec: add ndo_select_queue to fix TX bandwidth fluctuations") Signed-off-by: Radu Bulie <[email protected]> Signed-off-by: Wei Fang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-10bcachefs: Fix uninitialized var in bch2_journal_replay()Kent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <[email protected]>
2023-12-10ALSA: hda/tas2781: leave hda_component in usable stateGergo Koteles1-2/+6
Unloading then loading the module causes a NULL ponter dereference. The hda_unbind zeroes the hda_component, later the hda_bind tries to dereference the codec field. The hda_component is only initialized once by tas2781_generic_fixup. Set only previously modified fields to NULL. BUG: kernel NULL pointer dereference, address: 0000000000000322 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x7f/0x180 ? asm_exc_page_fault+0x26/0x30 ? tas2781_hda_bind+0x59/0x140 [snd_hda_scodec_tas2781_i2c] component_bind_all+0xf3/0x240 try_to_bring_up_aggregate_device+0x1c3/0x270 __component_add+0xbc/0x1a0 tas2781_hda_i2c_probe+0x289/0x3a0 [snd_hda_scodec_tas2781_i2c] i2c_device_probe+0x136/0x2e0 Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Cc: [email protected] Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/8b8ed2bd5f75fbb32e354a3226c2f966fa85b46b.1702156522.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2023-12-10ALSA: hda/realtek: Apply mute LED quirk for HP15-dbHartmut Knaack1-0/+1
The HP laptop 15-db0403ng uses the ALC236 codec and controls the mute LED using COEF 0x07 index 1. Sound card subsystem: Hewlett-Packard Company Device [103c:84ae] Use the existing quirk for this model. Signed-off-by: Hartmut Knaack <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-10ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variantsKai Vehmanen1-0/+2
On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801 Cc: Ville Syrjälä <[email protected]> Cc: Jani Saarinen <[email protected]> Signed-off-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-10ALSA: hda/hdmi: add force-connect quirk for NUC5CPYBKai Vehmanen1-0/+1
Add one more older NUC model that requires quirk to force all pins to be connected. The display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/issues/3 Cc: Ville Syrjälä <[email protected]> Cc: Jani Saarinen <[email protected]> Signed-off-by: Kai Vehmanen <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-09Merge tag 'powerpc-6.7-4' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix stack teardown in ftrace_no_trace, seen as crashes doing CPU hotplug while ftrace is active. Thanks to Naveen N Rao. * tag 'powerpc-6.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ftrace: Fix stack teardown in ftrace_no_trace
2023-12-09Merge tag 'gpio-fixes-for-v6.7-rc5' of ↵Linus Torvalds1-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix an error path after a failed export in sysfs code * tag 'gpio-fixes-for-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: sysfs: Fix error handling on failed export
2023-12-09io_uring/af_unix: disable sending io_uring over socketsPavel Begunkov2-7/+6
File reference cycles have caused lots of problems for io_uring in the past, and it still doesn't work exactly right and races with unix_stream_read_generic(). The safest fix would be to completely disallow sending io_uring files via sockets via SCM_RIGHT, so there are no possible cycles invloving registered files and thus rendering SCM accounting on the io_uring side unnecessary. Cc: [email protected] Fixes: 0091bfc81741b ("io_uring/af_unix: defer registered files gc to io_uring release") Reported-and-suggested-by: Jann Horn <[email protected]> Signed-off-by: Pavel Begunkov <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-09atm: solos-pci: Fix potential deadlock on &tx_queue_lockChengfeng Ye1-2/+2
As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #2> pclose() --> spin_lock(&card->tx_queue_lock) <interrupt> --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-09atm: solos-pci: Fix potential deadlock on &cli_queue_lockChengfeng Ye1-2/+2
As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-12-09Merge tag 'usb-6.7-rc5' of ↵Linus Torvalds4-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB fixes for 6.7-rc5 to resolve some reported issues. Included in here are: - usb gadget f_hid, and uevent fix - xhci driver revert to resolve a much-reported issue - typec driver fix All of these have been in linux-next with no reported issues" * tag 'usb-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_hid: fix report descriptor allocation Revert "xhci: Loosen RPM as default policy to cover for AMD xHC 1.1" usb: typec: class: fix typec_altmode_put_partner to put plugs USB: gadget: core: adjust uevent timing on gadget unbind
2023-12-09Merge tag 'tty-6.7-rc4' of ↵Linus Torvalds6-65/+85
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 6.7-rc4 to resolve some reported issues. Included in here are: - pl011 dma support fix - sc16is7xx driver fix - ma35d1 console index fix - 8250 driver fixes for small issues All of these have been in linux-next with no reported issues" * tag 'tty-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_dw: Add ACPI ID for Granite Rapids-D UART serial: ma35d1: Validate console index before assignment ARM: PL011: Fix DMA support serial: sc16is7xx: address RX timeout interrupt errata serial: 8250: 8250_omap: Clear UART_HAS_RHR_IT_DIS bit serial: 8250_omap: Add earlycon support for the AM654 UART controller serial: 8250: 8250_omap: Do not start RX DMA on THRI interrupt
2023-12-09Merge tag 'char-misc-6.7-rc5' of ↵Linus Torvalds16-74/+79
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small fixes for 6.7-rc5 for a variety of small driver subsystems. Included in here are: - debugfs revert for reported issue - greybus revert for reported issue - greybus fixup for endian build warning - coresight driver fixes - nvmem driver fixes - devcoredump fix - parport new device id - ndtest build fix All of these have ben in linux-next with no reported issues" * tag 'char-misc-6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: Do not expect fixed layouts to grab a layout driver parport: Add support for Brainboxes IX/UC/PX parallel cards Revert "greybus: gb-beagleplay: Ensure le for values in transport" greybus: gb-beagleplay: Ensure le for values in transport greybus: BeaglePlay driver needs CRC_CCITT Revert "debugfs: annotate debugfs handlers vs. removal with lockdep" devcoredump: Send uevent once devcd is ready ndtest: fix typo class_regster -> class_register misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_write misc: mei: client.c: return negative error code in mei_cl_write mei: pxp: fix mei_pxp_send_message return value coresight: ultrasoc-smb: Fix uninitialized before use buf_hw_base coresight: ultrasoc-smb: Config SMB buffer before register sink coresight: ultrasoc-smb: Fix sleep while close preempt in enable_smb Documentation: coresight: fix `make refcheckdocs` warning hwtracing: hisi_ptt: Don't try to attach a task hwtracing: hisi_ptt: Handle the interrupt in hardirq context hwtracing: hisi_ptt: Add dummy callback pmu::read() coresight: Fix crash when Perf and sysfs modes are used concurrently coresight: etm4x: Remove bogous __exit annotation for some functions
2023-12-09Merge tag 'loongarch-fixes-6.7-2' of ↵Linus Torvalds7-20/+12
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Preserve syscall nr across execve(), slightly clean up drdtime(), fix the Clang built zboot kernel, fix a stack unwinder bug and several bpf jit bugs" * tag 'loongarch-fixes-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: BPF: Fix unconditional bswap instructions LoongArch: BPF: Fix sign-extension mov instructions LoongArch: BPF: Don't sign extend function return value LoongArch: BPF: Don't sign extend memory load operand LoongArch: Preserve syscall nr across execve() LoongArch: Set unwind stack type to unknown rather than set error flag LoongArch: Slightly clean up drdtime() LoongArch: Apply dynamic relocations for LLD
2023-12-09Merge tag 'mips-fixes_6.7_1' of ↵Linus Torvalds6-33/+64
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Fixes for broken Loongson firmware - Fix lockdep splat - Fix FPU states when creating kernel threads * tag 'mips-fixes_6.7_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kernel: Clear FPU states when setting up kernel threads MIPS: Loongson64: Handle more memory types passed from firmware MIPS: Loongson64: Enable DMA noncoherent support MIPS: Loongson64: Reserve vgabios memory on boot mips/smp: Call rcutree_report_cpu_starting() earlier
2023-12-09Merge tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of ↵Linus Torvalds3-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Namhyung Kim: "A random set of small bug fixes including: - Fix segfault on AmpereOne due to missing default metricgroup name - Fix segfault on `perf list --json` due to NULL pointer" * tag 'perf-tools-fixes-for-v6.7-2-2023-12-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf list: Fix JSON segfault by setting the used skip_duplicate_pmus callback perf vendor events arm64: AmpereOne: Add missing DefaultMetricgroupName fields perf metrics: Avoid segv if default metricgroup isn't set
2023-12-09Merge tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-58/+187
Pull smb client fixes from Steve French: "Six smb3 client fixes: - Fixes for copy_file_range and clone (cache invalidation and file size), also addresses an xfstest failure - Fix to return proper error if REMAP_FILE_DEDUP set (also fixes xfstest generic/304) - Fix potential null pointer reference with DFS - Multichannel fix addressing (reverting an earlier patch) some of the problems with enabling/disabling channels dynamically Still working on a followon multichannel fix to address another issue found in reconnect testing that will send next week" * tag '6.7-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: reconnect worker should take reference on server struct unconditionally Revert "cifs: reconnect work should have reference on server struct" cifs: Fix non-availability of dedup breaking generic/304 smb: client: fix potential NULL deref in parse_dfs_referrals() cifs: Fix flushing, invalidation and file size with FICLONE cifs: Fix flushing, invalidation and file size with copy_file_range()
2023-12-09LoongArch: BPF: Fix unconditional bswap instructionsTiezhu Yang1-2/+2
We can see that "bswap32: Takes an unsigned 32-bit number in either big- or little-endian format and returns the equivalent number with the same bit width but opposite endianness" in BPF Instruction Set Specification, so it should clear the upper 32 bits in "case 32:" for both BPF_ALU and BPF_ALU64. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 ret 1460850314 != -271733879 (0x5712ce8a != 0xefcdab89)FAIL (1 times) test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 ret -1460850316 != 271733878 (0xa8ed3174 != 0x10325476)FAIL (1 times) After: test_bpf: #313 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 jited:1 4 PASS test_bpf: #317 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 jited:1 4 PASS Fixes: 4ebf9216e7df ("LoongArch: BPF: Support unconditional bswap instructions") Acked-by: Hengqi Chen <[email protected]> Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: BPF: Fix sign-extension mov instructionsTiezhu Yang1-0/+2
We can see that "Short form of movsx, dst_reg = (s8,s16,s32)src_reg" in include/linux/filter.h, additionally, for BPF_ALU64 the value of the destination register is unchanged whereas for BPF_ALU the upper 32 bits of the destination register are zeroed, so it should clear the upper 32 bits for BPF_ALU. [root@linux fedora]# echo 1 > /proc/sys/net/core/bpf_jit_enable [root@linux fedora]# modprobe test_bpf Before: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #82 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) After: test_bpf: #81 ALU_MOVSX | BPF_B jited:1 6 PASS test_bpf: #82 ALU_MOVSX | BPF_H jited:1 6 PASS By the way, the bpf selftest case "./test_progs -t verifier_movsx" can also be fixed with this patch. Fixes: f48012f16150 ("LoongArch: BPF: Support sign-extension mov instructions") Acked-by: Hengqi Chen <[email protected]> Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: BPF: Don't sign extend function return valueHengqi Chen1-2/+0
The `cls_redirect` test triggers a kernel panic like: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 30.938489] CPU 3 Unable to handle kernel paging request at virtual address fffffffffd814de0, era == ffff800002009fb8, ra == ffff800002009f9c [ 30.939331] Oops[#1]: [ 30.939513] CPU: 3 PID: 1260 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 30.939732] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 30.939901] pc ffff800002009fb8 ra ffff800002009f9c tp 9000000104da4000 sp 9000000104da7ab0 [ 30.940038] a0 fffffffffd814de0 a1 9000000104da7a68 a2 0000000000000000 a3 9000000104da7c10 [ 30.940183] a4 9000000104da7c14 a5 0000000000000002 a6 0000000000000021 a7 00005555904d7f90 [ 30.940321] t0 0000000000000110 t1 0000000000000000 t2 fffffffffd814de0 t3 0004c4b400000000 [ 30.940456] t4 ffffffffffffffff t5 00000000c3f63600 t6 0000000000000000 t7 0000000000000000 [ 30.940590] t8 000000000006d803 u0 0000000000000020 s9 9000000104da7b10 s0 900000010504c200 [ 30.940727] s1 fffffffffd814de0 s2 900000010504c200 s3 9000000104da7c10 s4 9000000104da7ad0 [ 30.940866] s5 0000000000000000 s6 90000000030e65bc s7 9000000104da7b44 s8 90000000044f6fc0 [ 30.941015] ra: ffff800002009f9c bpf_prog_846803e5ae81417f_cls_redirect+0xa0/0x590 [ 30.941535] ERA: ffff800002009fb8 bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.941696] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 30.942224] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 30.942330] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 30.942453] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 30.942612] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 30.942764] BADV: fffffffffd814de0 [ 30.942854] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 30.942974] Modules linked in: [ 30.943078] Process test_progs (pid: 1260, threadinfo=00000000ce303226, task=000000007d10bb76) [ 30.943306] Stack : 900000010a064000 90000000044f6fc0 9000000104da7b48 0000000000000000 [ 30.943495] 0000000000000000 9000000104da7c14 9000000104da7c10 900000010504c200 [ 30.943626] 0000000000000001 ffff80001b88c000 9000000104da7b70 90000000030e6668 [ 30.943785] 0000000000000000 9000000104da7b58 ffff80001b88c048 9000000003d05000 [ 30.943936] 900000000303ac88 0000000000000000 0000000000000000 9000000104da7b70 [ 30.944091] 0000000000000000 0000000000000001 0000000731eeab00 0000000000000000 [ 30.944245] ffff80001b88c000 0000000000000000 0000000000000000 54b99959429f83b8 [ 30.944402] ffff80001b88c000 90000000044f6fc0 9000000101d70000 ffff80001b88c000 [ 30.944538] 000000000000005a 900000010504c200 900000010a064000 900000010a067000 [ 30.944697] 9000000104da7d88 0000000000000000 9000000003d05000 90000000030e794c [ 30.944852] ... [ 30.944924] Call Trace: [ 30.945120] [<ffff800002009fb8>] bpf_prog_846803e5ae81417f_cls_redirect+0xbc/0x590 [ 30.945650] [<90000000030e6668>] bpf_test_run+0x1ec/0x2f8 [ 30.945958] [<90000000030e794c>] bpf_prog_test_run_skb+0x31c/0x684 [ 30.946065] [<90000000026d4f68>] __sys_bpf+0x678/0x2724 [ 30.946159] [<90000000026d7288>] sys_bpf+0x20/0x2c [ 30.946253] [<90000000032dd224>] do_syscall+0x7c/0x94 [ 30.946343] [<9000000002541c5c>] handle_syscall+0xbc/0x158 [ 30.946492] [ 30.946549] Code: 0015030e 5c0009c0 5001d000 <28c00304> 02c00484 29c00304 00150009 2a42d2e4 0280200d [ 30.946793] [ 30.946971] ---[ end trace 0000000000000000 ]--- [ 32.093225] Kernel panic - not syncing: Fatal exception in interrupt [ 32.093526] Kernel relocated by 0x2320000 [ 32.093630] .text @ 0x9000000002520000 [ 32.093725] .data @ 0x9000000003400000 [ 32.093792] .bss @ 0x9000000004413200 [ 34.971998] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- This is because we signed-extend function return values. When subprog mode is enabled, we have: cls_redirect() -> get_global_metrics() returns pcpu ptr 0xfffffefffc00b480 The pointer returned is later signed-extended to 0xfffffffffc00b480 at `BPF_JMP | BPF_EXIT`. During BPF prog run, this triggers unhandled page fault and a kernel panic. Drop the unnecessary signed-extension on return values like other architectures do. With this change, we have: # ./test_progs -t cls_redirect Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. #51/1 cls_redirect/cls_redirect_inlined:OK #51/2 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/3 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/4 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/5 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/6 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/7 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/8 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/9 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/10 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/11 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/12 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/13 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/14 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/15 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/16 cls_redirect/cls_redirect_subprogs:OK #51/17 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/18 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/19 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/20 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/21 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/22 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/23 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/24 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/25 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/26 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/27 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/28 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/29 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/30 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51/31 cls_redirect/cls_redirect_dynptr:OK #51/32 cls_redirect/IPv4 TCP accept unknown (no hops, flags: SYN):OK #51/33 cls_redirect/IPv6 TCP accept unknown (no hops, flags: SYN):OK #51/34 cls_redirect/IPv4 TCP accept unknown (no hops, flags: ACK):OK #51/35 cls_redirect/IPv6 TCP accept unknown (no hops, flags: ACK):OK #51/36 cls_redirect/IPv4 TCP forward unknown (one hop, flags: ACK):OK #51/37 cls_redirect/IPv6 TCP forward unknown (one hop, flags: ACK):OK #51/38 cls_redirect/IPv4 TCP accept known (one hop, flags: ACK):OK #51/39 cls_redirect/IPv6 TCP accept known (one hop, flags: ACK):OK #51/40 cls_redirect/IPv4 UDP accept unknown (no hops, flags: none):OK #51/41 cls_redirect/IPv6 UDP accept unknown (no hops, flags: none):OK #51/42 cls_redirect/IPv4 UDP forward unknown (one hop, flags: none):OK #51/43 cls_redirect/IPv6 UDP forward unknown (one hop, flags: none):OK #51/44 cls_redirect/IPv4 UDP accept known (one hop, flags: none):OK #51/45 cls_redirect/IPv6 UDP accept known (one hop, flags: none):OK #51 cls_redirect:OK Summary: 1/45 PASSED, 0 SKIPPED, 0 FAILED Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: BPF: Don't sign extend memory load operandHengqi Chen1-8/+2
The `cgrp_local_storage` test triggers a kernel panic like: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. [ 550.930632] CPU 1 Unable to handle kernel paging request at virtual address 0000000000000080, era == ffff80000200be34, ra == ffff80000200be00 [ 550.931781] Oops[#1]: [ 550.931966] CPU: 1 PID: 1303 Comm: test_progs Not tainted 6.7.0-rc2-loong-devel-g2f56bb0d2327 #35 a896aca3f4164f09cc346f89f2e09832e07be5f6 [ 550.932215] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 550.932403] pc ffff80000200be34 ra ffff80000200be00 tp 9000000108350000 sp 9000000108353dc0 [ 550.932545] a0 0000000000000000 a1 0000000000000517 a2 0000000000000118 a3 00007ffffbb15558 [ 550.932682] a4 00007ffffbb15620 a5 90000001004e7700 a6 0000000000000021 a7 0000000000000118 [ 550.932824] t0 ffff80000200bdc0 t1 0000000000000517 t2 0000000000000517 t3 00007ffff1c06ee0 [ 550.932961] t4 0000555578ae04d0 t5 fffffffffffffff8 t6 0000000000000004 t7 0000000000000020 [ 550.933097] t8 0000000000000040 u0 00000000000007b8 s9 9000000108353e00 s0 90000001004e7700 [ 550.933241] s1 9000000004005000 s2 0000000000000001 s3 0000000000000000 s4 0000555555eb2ec8 [ 550.933379] s5 00007ffffbb15bb8 s6 00007ffff1dafd60 s7 000055555663f610 s8 00007ffff1db0050 [ 550.933520] ra: ffff80000200be00 bpf_prog_98f1b9e767be2a84_on_enter+0x40/0x200 [ 550.933911] ERA: ffff80000200be34 bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.934105] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 550.934596] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 550.934712] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 550.934836] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 550.934976] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 550.935097] BADV: 0000000000000080 [ 550.935181] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 550.935291] Modules linked in: [ 550.935391] Process test_progs (pid: 1303, threadinfo=000000006c3b1c41, task=0000000061f84a55) [ 550.935643] Stack : 00007ffffbb15bb8 0000555555eb2ec8 0000000000000000 0000000000000001 [ 550.935844] 9000000004005000 ffff80001b864000 00007ffffbb15450 90000000029aa034 [ 550.935990] 0000000000000000 9000000108353ec0 0000000000000118 d07d9dfb09721a09 [ 550.936175] 0000000000000001 0000000000000000 9000000108353ec0 0000000000000118 [ 550.936314] 9000000101d46ad0 900000000290abf0 000055555663f610 0000000000000000 [ 550.936479] 0000000000000003 9000000108353ec0 00007ffffbb15450 90000000029d7288 [ 550.936635] 00007ffff1dafd60 000055555663f610 0000000000000000 0000000000000003 [ 550.936779] 9000000108353ec0 90000000035dd1f0 00007ffff1dafd58 9000000002841c5c [ 550.936939] 0000000000000119 0000555555eea5a8 00007ffff1d78780 00007ffffbb153e0 [ 550.937083] ffffffffffffffda 00007ffffbb15518 0000000000000040 00007ffffbb15558 [ 550.937224] ... [ 550.937299] Call Trace: [ 550.937521] [<ffff80000200be34>] bpf_prog_98f1b9e767be2a84_on_enter+0x74/0x200 [ 550.937910] [<90000000029aa034>] bpf_trace_run2+0x90/0x154 [ 550.938105] [<900000000290abf0>] syscall_trace_enter.isra.0+0x1cc/0x200 [ 550.938224] [<90000000035dd1f0>] do_syscall+0x48/0x94 [ 550.938319] [<9000000002841c5c>] handle_syscall+0xbc/0x158 [ 550.938477] [ 550.938607] Code: 580009ae 50016000 262402e4 <28c20085> 14092084 03a00084 16000024 03240084 00150006 [ 550.938851] [ 550.939021] ---[ end trace 0000000000000000 ]--- Further investigation shows that this panic is triggered by memory load operations: ptr = bpf_cgrp_storage_get(&map_a, task->cgroups->dfl_cgrp, 0, BPF_LOCAL_STORAGE_GET_F_CREATE); The expression `task->cgroups->dfl_cgrp` involves two memory load. Since the field offset fits in imm12 or imm14, we use ldd or ldptrd instructions. But both instructions have the side effect that it will signed-extended the imm operand. Finally, we got the wrong addresses and panics is inevitable. Use a generic ldxd instruction to avoid this kind of issues. With this change, we have: # ./test_progs -t cgrp_local_storage Can't find bpf_testmod.ko kernel module: -2 WARNING! Selftests relying on bpf_testmod.ko will be skipped. test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec #48/1 cgrp_local_storage/tp_btf:OK test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL #48/4 cgrp_local_storage/negative:OK #48/5 cgrp_local_storage/cgroup_iter_sleepable:OK test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48/7 cgrp_local_storage/no_rcu_lock:OK #48 cgrp_local_storage:FAIL All error logs: test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec test_attach_cgroup:PASS:skel_open 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec test_attach_cgroup:PASS:prog_attach 0 nsec libbpf: prog 'update_cookie_tracing': failed to attach: ERROR: strerror_r(-524)=22 test_attach_cgroup:FAIL:prog_attach unexpected error: -524 #48/2 cgrp_local_storage/attach_cgroup:FAIL test_recursion:PASS:skel_open_and_load 0 nsec libbpf: prog 'on_lookup': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'on_lookup': failed to auto-attach: -524 test_recursion:FAIL:skel_attach unexpected error: -524 (errno 524) #48/3 cgrp_local_storage/recursion:FAIL test_yes_rcu_lock:PASS:skel_open 0 nsec test_yes_rcu_lock:PASS:skel_load 0 nsec libbpf: prog 'yes_rcu_lock': failed to attach: ERROR: strerror_r(-524)=22 libbpf: prog 'yes_rcu_lock': failed to auto-attach: -524 test_yes_rcu_lock:FAIL:skel_attach unexpected error: -524 (errno 524) #48/6 cgrp_local_storage/yes_rcu_lock:FAIL #48 cgrp_local_storage:FAIL Summary: 0/4 PASSED, 0 SKIPPED, 1 FAILED No panics any more (The test still failed because lack of BPF trampoline which I am actively working on). Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: Preserve syscall nr across execve()Hengqi Chen1-1/+1
Currently, we store syscall nr in pt_regs::regs[11] and syscall execve() accidentally overrides it during its execution: sys_execve() -> do_execve() -> do_execveat_common() -> bprm_execve() -> exec_binprm() -> search_binary_handler() -> load_elf_binary() -> ELF_PLAT_INIT() ELF_PLAT_INIT() reset regs[11] to 0, so in syscall_exit_to_user_mode() we later get a wrong syscall nr. This breaks tools like execsnoop since it relies on execve() tracepoints. Skip pt_regs::regs[11] reset in ELF_PLAT_INIT() to fix the issue. Signed-off-by: Hengqi Chen <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: Set unwind stack type to unknown rather than set error flagJinyang He3-3/+2
During unwinding, unwind_done() is used as an end condition. Normally it unwind to the user stack and then set the stack type to unknown, which is a normal exit. When something unexpected happens in unwind process and we cannot unwind anymore, we should set the error flag, and also set the stack type to unknown to indicate that the unwind process can not continue. The error flag emphasizes that the unwind process produce an unexpected error. There is no unexpected things when we unwind the PT_REGS in the top of IRQ stack and find out that is an user mode PT_REGS. Thus, we should not set error flag and just set stack type to unknown. Reported-by: Hengqi Chen <[email protected]> Acked-by: Hengqi Chen <[email protected]> Signed-off-by: Jinyang He <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: Slightly clean up drdtime()Xi Ruoyao1-3/+2
As we are just discarding the stable clock ID, simply write it into $zero instead of allocating a temporary register. Signed-off-by: Xi Ruoyao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-09LoongArch: Apply dynamic relocations for LLDWANG Rui1-1/+1
For the following assembly code: .text .global func func: nop .data var: .dword func When linked with `-pie`, GNU LD populates the `var` variable with the pre-relocated value of `func`. However, LLVM LLD does not exhibit the same behavior. This issue also arises with the `kernel_entry` in arch/ loongarch/kernel/head.S: _head: .word MZ_MAGIC /* "MZ", MS-DOS header */ .org 0x8 .dword kernel_entry /* Kernel entry point */ The correct kernel entry from the MS-DOS header is crucial for jumping to vmlinux from zboot. This necessity is why the compressed relocatable kernel compiled by Clang encounters difficulties in booting. To address this problem, it is proposed to apply dynamic relocations to place with `--apply-dynamic-relocs`. Link: https://github.com/ClangBuiltLinux/linux/issues/1962 Signed-off-by: WANG Rui <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-12-08Merge branch 'bnxt_en-misc-fixes'Jakub Kicinski5-39/+44
Michael Chan says: ==================== bnxt_en: Misc. fixes 4 miscellaneous driver fixes covering PM resume, SKB recycling, wrong return value check, and PTP HWTSTAMP_FILTER_ALL. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logicMichael Chan2-4/+24
When the chip is configured to timestamp all receive packets, the timestamp in the RX completion is only valid if the metadata present flag is not set for packets received on the wire. In addition, internal loopback packets will never have a valid timestamp and the timestamp field will always be zero. We must exclude any 0 value in the timestamp field because there is no way to determine if it is a loopback packet or not. Add a new function bnxt_rx_ts_valid() to check for all timestamp valid conditions. Fixes: 66ed81dcedc6 ("bnxt_en: Enable packet timestamping for all RX packets") Reviewed-by: Andy Gospodarek <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08bnxt_en: Fix wrong return value check in bnxt_close_nic()Kalesh AP5-34/+16
The wait_event_interruptible_timeout() function returns 0 if the timeout elapsed, -ERESTARTSYS if it was interrupted by a signal, and the remaining jiffies otherwise if the condition evaluated to true before the timeout elapsed. Driver should have checked for zero return value instead of a positive value. MChan: Print a warning for -ERESTARTSYS. The close operation will proceed anyway when wait_event_interruptible_timeout() returns for any reason. Since we do the close no matter what, we should not return this error code to the caller. Change bnxt_close_nic() to a void function and remove all error handling from some of the callers. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Andy Gospodarek <[email protected]> Reviewed-by: Vikas Gupta <[email protected]> Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Kalesh AP <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08bnxt_en: Fix skb recycling logic in bnxt_deliver_skb()Sreekanth Reddy1-1/+2
Receive SKBs can go through the VF-rep path or the normal path. skb_mark_for_recycle() is only called for the normal path. Fix it to do it for both paths to fix possible stalled page pool shutdown errors. Fixes: 86b05508f775 ("bnxt_en: Use the unified RX page pool buffers for XDP and non-XDP") Reviewed-by: Somnath Kotur <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Reviewed-by: Vikas Gupta <[email protected]> Signed-off-by: Sreekanth Reddy <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08bnxt_en: Clear resource reservation during resumeSomnath Kotur1-0/+2
We are issuing HWRM_FUNC_RESET cmd to reset the device including all reserved resources, but not clearing the reservations within the driver struct. As a result, when the driver re-initializes as part of resume, it believes that there is no need to do any resource reservation and goes ahead and tries to allocate rings which will eventually fail beyond a certain number pre-reserved by the firmware. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP <[email protected]> Reviewed-by: Ajit Khaparde <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Michael Chan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08tcp: fix tcp_disordered_ack() vs usec TS resolutionEric Dumazet1-2/+20
After commit 939463016b7a ("tcp: change data receiver flowlabel after one dup") we noticed an increase of TCPACKSkippedPAWS events. Neal Cardwell tracked the issue to tcp_disordered_ack() assumption about remote peer TS clock. RFC 1323 & 7323 are suggesting the following: "timestamp clock frequency in the range 1 ms to 1 sec per tick between 1ms and 1sec." This has to be adjusted for 1 MHz clock frequency. This hints at reorders of SACK packets on send side, this might deserve a future patch. (skb->ooo_okay is always set for pure ACK packets) Fixes: 614e8316aa4c ("tcp: add support for usec resolution in TCP TS values") Co-developed-by: Neal Cardwell <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: David Morley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08MAINTAINERS: remove myself as maintainer of SMCKarsten Graul1-1/+0
I changed responsibilities some time ago, its time to remove myself as maintainer of the SMC component. Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: Wenjia Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08cxl/cdat: Free correct buffer on checksum errorIra Weiny1-7/+6
The new 6.7-rc1 kernel now checks the checksum on CDAT data. While using a branch of Fan's DCD qemu work (and specifying DCD devices), the following splat was observed. WARNING: CPU: 1 PID: 1384 at drivers/base/devres.c:1064 devm_kfree+0x4f/0x60 ... RIP: 0010:devm_kfree+0x4f/0x60 ... ? devm_kfree+0x4f/0x60 read_cdat_data+0x1a0/0x2a0 [cxl_core] cxl_port_probe+0xdf/0x200 [cxl_port] ... The issue in qemu is still unknown but the spat is a straight forward bug in the CDAT checksum processing code. Use a CDAT buffer variable to ensure the devm_free() works correctly on error. Fixes: 670e4e88f3b1 ("cxl: Add checksum verification to CDAT from CXL") Signed-off-by: Ira Weiny <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Reviewed-by: Fan Ni <[email protected]> Reviewed-by: Robert Richter <[email protected]> Link: http://lore.kernel.org/r/[email protected] Signed-off-by: Dan Williams <[email protected]>
2023-12-08Merge branch 'qca_spi-collection-of-major-fixes'Jakub Kicinski2-9/+28
Stefan Wahren says: ==================== qca_spi: collection of major fixes This series contains a collection of major fixes for the qca_spi driver, which has been recently discovered. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-08qca_spi: Fix reset behaviorStefan Wahren1-1/+7
In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.