| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In xiic_process, it is possible that error events such as arbitration
lost or TX error can be raised in conjunction with other interrupt flags
such as TX FIFO empty or bus not busy. Error events result in the
controller being reset and the error returned to the calling request,
but the function could potentially try to keep handling the other
events, such as by writing more messages into the TX FIFO. Since the
transaction has already failed, this is not helpful and will just cause
issues.
This problem has been present ever since:
commit 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
which allowed non-error events to be handled after errors, but became
more obvious after:
commit 743e227a8959 ("i2c: xiic: Defer xiic_wakeup() and
__xiic_start_xfer() in xiic_process()")
which reworked the code to add a WARN_ON which triggers if both the
xfer_more and wakeup_req flags were set, since this combination is
not supposed to happen, but was occurring in this scenario.
Skip further interrupt handling after error flags are detected to avoid
this problem.
Fixes: 7f9906bd7f72 ("i2c: xiic: Service all interrupts in isr")
Signed-off-by: Robert Hancock <[email protected]>
Acked-by: Andi Shyti <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
|
|
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: John Johansen <[email protected]>
|
|
Currently the permstables of the shared dfas are not shared, and need
to be allocated and copied. In the future this should be addressed
with a larger rework on dfa and pdb ref counts and structure sharing.
BugLink: http://bugs.launchpad.net/bugs/2017903
Fixes: 217af7e2f4de ("apparmor: refactor profile rules and attachments")
Cc: [email protected]
Signed-off-by: John Johansen <[email protected]>
Reviewed-by: Jon Tourville <[email protected]>
|
|
The transition table size was not being set by compat mappings
resulting in the profile verification code not being run. Unfortunately
the checks were also buggy not being correctly updated from the old
accept perms, to the new layout.
Also indicate to userspace that the kernel has the permstable verification
fixes.
BugLink: http://bugs.launchpad.net/bugs/2017903
Fixes: 670f31774ab6 ("apparmor: verify permission table indexes")
Signed-off-by: John Johansen <[email protected]>
Reviewed-by: Jon Tourville <[email protected]>
|
|
If the extended permission table is present we should not be attempting
to do a compat_permission remap as the compat_permissions are not
stored in the dfa accept states.
Fixes: fd1b2b95a211 ("apparmor: add the ability for policy to specify a permission table")
Signed-off-by: John Johansen <[email protected]>
Reviewed-by: Jon Tourville <[email protected]>
|
|
In the ongoing effort to convert all fake flexible arrays to proper
flexible arrays, replace aa_buffer's 1-element "buffer" member with a
flexible array.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Add check for failure to allocate the permission table.
Fixes: caa9f579ca72 ("apparmor: isolate policy backwards compatibility to its own file")
Signed-off-by: John Johansen <[email protected]>
|
|
rhashtable_insert_fast() could return err value when memory allocation is
failed. but unpack_profile() do not check values and this always returns
success value. This patch just adds error check code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e025be0f26d5 ("apparmor: support querying extended trusted helper extra data")
Signed-off-by: Danila Chernetsov <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
1. Return directly after a call of the function “kzalloc” failed
at the beginning in these function implementations.
2. Omit extra initialisations (for a few local variables)
which became unnecessary with this refactoring.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Make the description of @table to @strs in function unpack_trans_table()
to silence the warnings:
security/apparmor/policy_unpack.c:456: warning: Function parameter or member 'strs' not described in 'unpack_trans_table'
security/apparmor/policy_unpack.c:456: warning: Excess function parameter 'table' description in 'unpack_trans_table'
Reported-by: Abaci Robot <[email protected]>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4332
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
Replace the use of strcpy() in build_aa_ext_struct() in
policy_unpack_test.c with strscpy().
strscpy() is the safer method to use to ensure the buffer does not
overflow. This was found by kernel test robot:
https://lore.kernel.org/all/[email protected]/.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Rae Moar <[email protected]>
Signed-off-by: John Johansen <[email protected]>
|
|
These cleanups came up as part of the discussion on the "riscv: Reduce
ARCH_KMALLOC_MINALIGN to 8" patch set, but that needs additional work
and thus will be delayed at least a cycle.
* b4-shazam-merge:
riscv: mm: mark noncoherent_supported as __ro_after_init
riscv: mm: mark CBO relate initialization funcs as __init
riscv: errata: thead: only set cbom size & noncoherent during boot
Link: https://lore.kernel.org/linux-riscv/[email protected]/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The noncoherent_supported indicates whether the HW is coherent or not,
it won't change after booting, mark it as __ro_after_init.
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The two functions cbo_get_block_size() and riscv_init_cbo_blocksizes()
are only called during booting, mark them as __init.
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The CBOM size and whether the HW is noncoherent is known and
determined during booting and won't change after that.
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This allocates the VM flag needed to support the userfaultfd minor fault
functionality. Because the flag bit is >= bit 32, it can only be enabled
for 64-bit kernels. See commit 7677f7fd8be7 ("userfaultfd: add minor
fault registration mode") for more information.
Signed-off-by: Samuel Holland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
We've had a ton of issues around the ISA string parsing rules elsewhere
in RISC-V, so let's at least be clear about what the rules are so we can
try and avoid more issues.
Link: https://lore.kernel.org/r/CAK9=C2Vy-4V9kgnga98tiC3TeHkR2LFPakyBbS8s_h3_Z=ieyQ@mail.gmail.com/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Merge additional ACPI device enumeration code changes for 6.5-rc1.
- Make acpi_companion_match() return a const pointer and update its
callers accordingly (Andy Shevchenko).
- Move the extern declaration of the acpi_root variable to a header
file so as to address a compiler warning (Andy Shevchenko).
- Address compiler warnings in the ACPI device enumeration code by
adding a missing header file include to it (Ben Dooks).
- Refine the SMB0001 quirk in the ACPI device enumeration code so as to
address an i2c-scmi driver regression (Andy Shevchenko).
- Clean up two pieces of the ACPI device enumeration code (Andy
Shevchenko).
* acpi-bus:
ACPI: bus: Constify acpi_companion_match() returned value
* acpi-scan:
ACPI: scan: Use the acpi_match_acpi_device() helper
ACPI: platform: Move SMB0001 HID to the header and reuse
ACPI: platform: Ignore SMB0001 only when it has resources
ACPI: bus: Introduce acpi_match_acpi_device() helper
ACPI: scan: fix undeclared variable warnings by including sleep.h
ACPI: scan: Move acpi_root to internal header
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"There are three small fixes that came up sincie the past week:
- an incorrect bit offset in ixp4xx bus driver
- a riscv randconfig regression in the thead platform I merged
- whitespace fixes for some dts files"
* tag 'soc-fixes-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
ARM: dts: st: add missing space before {
RISC-V: make ARCH_THEAD preclude XIP_KERNEL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New support:
- TI J721S2 CSI BCDMA support
Updates:
- Native HDMI support for dw edma driver
- ste dma40 updates for supporting proper SRAM handle in DT
- removal of dma device chancnt setting in drivers"
* tag 'dmaengine-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (28 commits)
dmaengine: sprd: Don't set chancnt
dmaengine: hidma: Don't set chancnt
dmaengine: plx_dma: Don't set chancnt
dmaengine: axi-dmac: Don't set chancnt
dmaengine: dw-axi-dmac: Don't set chancnt
dmaengine: qcom: bam_dma: allow omitting num-{channels,ees}
dmaengine: dw-edma: Add HDMA DebugFS support
dmaengine: dw-edma: Add support for native HDMA
dmaengine: dw-edma: Create a new dw_edma_core_ops structure to abstract controller operation
dmaengine: dw-edma: Rename dw_edma_core_ops structure to dw_edma_plat_ops
dmaengine: ste_dma40: use proper format string for resource_size_t
dmaengine: make QCOM_HIDMA depend on HAS_IOMEM
dmaengine: ste_dma40: fix typo in enum documentation
dmaengine: ste_dma40: use correct print specfier for resource_size_t
MAINTAINERS: Add myself as the DW eDMA driver reviewer
MAINTAINERS: Add Manivannan to DW eDMA driver maintainers list
MAINTAINERS: Demote Gustavo Pimentel to DW EDMA driver reviewer
dmaengine: ti: k3-udma: Add support for J721S2 CSI BCDMA instance
dt-bindings: dma: ti: Add J721S2 BCDMA
dmaengine: ti: k3-psil-j721s2: Add PSI-L thread map for main CPSW2G
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add Xilinx Versal watchdog
- support Hygon FCH/SCH (Server Controller Hub)
- convert GPL notices to SPDX identifiers
- other improvements
* tag 'linux-watchdog-6.5-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: sp5100_tco: support Hygon FCH/SCH (Server Controller Hub)
dt-bindings: watchdog: restrict node name suffixes
MAINTAINERS: Add support for Xilinx versal watchdog
watchdog: xilinx_wwdt: Add Versal window watchdog support
dt-bindings: watchdog: xlnx,versal-wwdt: Add versal watchdog
watchdog: ziirave_wdt: Switch i2c driver back to use .probe()
watchdog: ibmasr: Replace GPL license notice with SPDX identifier
watchdog: Convert GPL 2.0 notice to SPDX identifier
watchdog: loongson1_wdt: Add DT support
|
|
snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc5280e ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.
For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.
Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.
Fixes: 1b6a6fc5280e ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Tested-by: Amadeusz Sławiński <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Signed-off-by: Karol Herbst <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
RM complains very loudly at the aux transaction attempts.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
DRM cleanup paths unconditionally call nvif_mmu_dtor() for clients,
which would result in a double-free if nvif_mmu_ctor()'d previously
failed.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
GSP-RM will enforce this, so implement on HW too so we can share code.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We're adding better support for the non-stall interrupt, which will need
to fetch the interrupt vector from the runlist's primary engine.
NVKM doesn't support all target engines (ie. NVDEC etc), and it wouldn't
be ideal to completely fail initialisation in this case.
Instead. Remove runlists where we can't determine all the needed info.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Callers expect this - not NULL.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This was renamed to nvkm_chan in the host rework.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No need for custom implementation anymore.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Also exposes this for use by upcoming GSP-RM initialisation code.
v2: add SPDX header
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This can be completely normal in some situations (ie. non-stall intrs
when nothing is waiting on them).
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Turns out, we're currently tearing down the disp core channel *before*
the satellite channels (wndw, etc) during suspend.
This makes RM return NV_ERR_NOT_SUPPORTED on attempting to reallocate
the core channel on resume for some reason, but we probably shouldn't
be doing it on HW either.
Tear down children in the reverse of allocation order instead.
Signed-off-by: Ben Skeggs <[email protected]>
Reviewed-by: Karol Herbst <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Smatch detected potential error pointer dereference.
drivers/gpu/drm/drm_syncobj.c:888 drm_syncobj_transfer_to_timeline()
error: 'fence' dereferencing possible ERR_PTR()
The error pointer comes from dma_fence_allocate_private_stub(). One
caller expected error pointers and one expected NULL pointers. Change
it to return NULL and update the caller which expected error pointers,
drm_syncobj_assign_null_handle(), to check for NULL instead.
Fixes: f781f661e8c9 ("dma-buf: keep the signaling time of merged fences v3")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Sumit Semwal <[email protected]>
Signed-off-by: Sumit Semwal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Laura's email address has not been valid for quite awhile now,
so wanted to clean up the reviewer list here.
I reached out to Laura who said it made sense to drop her from
the list, so this patch does that.
I do want to recognize Laura's long time contribution to this
area and her previous ION maintainership, as this couldn't
have gone upstream without her prior efforts. Many thanks!
Cc: Laura Abbott <[email protected]>
Cc: T.J. Mercier <[email protected]>
Cc: Sumit Semwal <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Brian Starkey <[email protected]>
Cc: John Stultz <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Acked-by: Laura Abbott <[email protected]>
Signed-off-by: John Stultz <[email protected]>
Reviewed-by: T.J. Mercier <[email protected]>
Signed-off-by: Sumit Semwal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Add devicetree binding document for Loongson-1 watchdog.
Signed-off-by: Keguang Zhang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix missing overflow use refcount checks in nf_tables.
2) Do not set IPS_ASSURED for IPS_NAT_CLASH entries in GRE tracker,
from Florian Westphal.
3) Bail out if nf_ct_helper_hash is NULL before registering helper,
from Florent Revest.
4) Use siphash() instead siphash_4u64() to fix performance regression,
also from Florian.
5) Do not allow to add rules to removed chains via ID,
from Thadeu Lima de Souza Cascardo.
6) Fix oob read access in byteorder expression, also from Thadeu.
netfilter pull request 23-07-06
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
If we boot with mvneta.txq_number=1, the txq_map is set incorrectly:
MVNETA_CPU_TXQ_ACCESS(1) refers to TX queue 1, but only TX queue 0 is
initialized. Fix this.
Fixes: 50bf8cb6fc9c ("net: mvneta: Configure XPS support")
Signed-off-by: Klaus Kudielka <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
Short summary of fixes pull:
* fbdev: Fix module infos on sparc
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20230629113814.GA10448@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from Adrian Glaubitz:
"Fix a compiler warning in the J2 probing code and a fix by Sergey
Shtylyov to avoid using IRQ0 on SH3 and SH4 targets. Masahiro Yamada
made some clean-up in the build system to address reports by the 0day
bot.
The most notable changes come from Artur Rojek who addressed a number
of issues in the DMA code, in particular a fix for the DMA channel
offset calculation that was introduced in in 7f47c7189b3e ("sh: dma:
More legacy cpu dma chainsawing.") in 2012!
Together with another change to correct the number of DMA channels for
each SuperH SoC according to specification, Artur's series unbreaks
the kernel on the SH7709 SoC allowing Linux to boot on the HP Jornada
680 handheld again.
Summary:
- Provide unxlate_dev_mem_ptr() in asm/io.h
- dma: Correct the number of DMA channels for SH7709
- dma: Drop incorrect SH_DMAC_BASE1 definition for SH4
- dma: Fix DMA channel offset calculation
- Remove compiler flag duplication
- Refactor header include path addition
- Move build rule for cchips/hd6446x/ to arch/sh/Kbuild
- Fix -Wmissing-include-dirs warnings for various platforms
- Avoid using IRQ0 on SH3 and SH4
- j2: Use ioremap() to translate device tree address into kernel
memory"
* tag 'sh-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: Provide unxlate_dev_mem_ptr() in asm/io.h
sh: dma: Correct the number of DMA channels for SH7709
sh: dma: Drop incorrect SH_DMAC_BASE1 definition for SH4
sh: dma: Fix DMA channel offset calculation
sh: Remove compiler flag duplication
sh: Refactor header include path addition
sh: Move build rule for cchips/hd6446x/ to arch/sh/Kbuild
sh: Fix -Wmissing-include-dirs warnings for various platforms
sh: Avoid using IRQ0 on SH3 and SH4
sh: j2: Use ioremap() to translate device tree address into kernel memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"New Support:
- Debugfs support for phy core and mediatek driver
- Hisilicon inno-usb2-phy driver supporting Hi3798MV100
- Qualcomm SGMII SerDes PHY driver, SM6115 & QCM2290 QMP-USB support,
SA8775P USB PHY & USB3 UNI support, QUSB2 support for IPQ9574,
IPQ9574 USB3 PHY
UpdatesL
- Sparx5 serdes phy power optimzation
- cadence salvo usb properties and updates and torrent DP with PCIe &
USB support
- Yaml conversion for Broadcom kona USB bindings and MXS USB binding"
* tag 'phy-for-6.5_v2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (67 commits)
dt-bindings: phy: brcm,brcmstb-usb-phy: Fix error in "compatible" conditional schema
dt-bindings: phy: mixel,mipi-dsi-phy: Remove assigned-clock* properties
dt-bindings: phy: intel,combo-phy: restrict node name suffixes
dt-bindings: phy: qcom,usb-hs-phy: Add compatible
phy: tegra: xusb: check return value of devm_kzalloc()
phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
phy: qcom: add the SGMII SerDes PHY driver
dt-bindings: phy: describe the Qualcomm SGMII PHY
phy: qualcomm: fix indentation in Makefile
phy: usb: suppress OC condition for 7439b2
phy: usb: Turn off phy when port is in suspend
phy: tegra: xusb: Clear the driver reference in usb-phy dev
dt-bindings: phy: mxs-usb-phy: add imx8ulp and imx8qm compatible
dt-bindings: phy: mxs-usb-phy: convert to DT schema format
dt-bindings: phy: qcom,qmp-usb: fix bindings error
dt-bindings: phy: qcom,qmp-ufs: fix the sc8180x regs
dt-bindings: phy: qcom,qmp-pcie: fix the sc8180x regs
phy: mediatek: tphy: add debugfs files
phy: core: add debugfs files
phy: fsl-imx8mp-usb: add support for phy tuning
...
|
|
and drop cached directories after 30 seconds
Signed-off-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Kumar Kartikeya Dwivedi says:
====================
Fix for a bug in check_max_stack_depth which allows bypassing the
512-byte stack limit.
====================
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Use the bpf_timer_set_callback helper to mark timer_cb as an async
callback, and put a direct call to timer_cb in the main subprog.
As the check_stack_max_depth happens after the do_check pass, the order
does not matter. Without the previous fix, the test passes successfully.
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The check_max_stack_depth pass happens after the verifier's symbolic
execution, and attempts to walk the call graph of the BPF program,
ensuring that the stack usage stays within bounds for all possible call
chains. There are two cases to consider: bpf_pseudo_func and
bpf_pseudo_call. In the former case, the callback pointer is loaded into
a register, and is assumed that it is passed to some helper later which
calls it (however there is no way to be sure), but the check remains
conservative and accounts the stack usage anyway. For this particular
case, asynchronous callbacks are skipped as they execute asynchronously
when their corresponding event fires.
The case of bpf_pseudo_call is simpler and we know that the call is
definitely made, hence the stack depth of the subprog is accounted for.
However, the current check still skips an asynchronous callback even if
a bpf_pseudo_call was made for it. This is erroneous, as it will miss
accounting for the stack usage of the asynchronous callback, which can
be used to breach the maximum stack depth limit.
Fix this by only skipping asynchronous callbacks when the instruction is
not a pseudo call to the subprog.
Fixes: 7ddc80a476c2 ("bpf: Teach stack depth check about async callbacks.")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Damien Le Moal <[email protected]> says:
blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of
sectors, that all zones (except possibly the last one) have the same
size and that zones cover the entire addressing space of the device.
While these checks are appropriate to verify that well tested hardware
devices have an adequate zone configurations, they lack in certain areas
which may result in issues with potentially buggy emulated devices
implemented with user drivers such as ublk or tcmu. Specifically, this
function does not check if the device driver indicated support for the
mandatory zone append writes, that is, if the device
max_zone_append_sectors queue limit is set to a non-zero value.
Additionally, invalid zones such as a zero length zone with a start
sector equal to the device capacity will not be detected and result in
out of bounds use of the zone bitmaps prepared with the callback
function blk_revalidate_zone_cb().
This series address these issues by modifying the 4 block device drivers
that currently support zoned block devices to ensure that they all set a
zoned device zone size and max zone append sectors limit before
executing blk_revalidate_disk_zones(). With these changes in place,
patch 5 improves blk_revalidate_disk_zones() to address the missing
checks, relying on the fact that the zone size and zone append limit are
normally set when this function is called.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
blk_revalidate_disk_zones() implements checks of the zones of a zoned
block device, verifying that the zone size is a power of 2 number of
sectors, that all zones (except possibly the last one) have the same
size and that zones cover the entire addressing space of the device.
While these checks are appropriate to verify that well tested hardware
devices have an adequate zone configurations, they lack in certain areas
which may result in issues with emulated devices implemented with user
drivers such as ublk or tcmu. Specifically, this function does not
check if the device driver indicated support for the mandatory zone
append writes, that is, if the device max_zone_append_sectors queue
limit is set to a non-zero value. Additionally, invalid zones such as
a zero length zone with a start sector equal to the device capacity will
not be detected and result in out of bounds use of the zone bitmaps
prepared with the callback function blk_revalidate_zone_cb().
Improve blk_revalidate_disk_zones() to address these inadequate checks,
relying on the fact that all device drivers supporting zoned block
devices must set the device zone size (chunk_sectors queue limit) and
the max_zone_append_sectors queue limit before executing this function.
The check for a non-zero max_zone_append_sectors value is done in
blk_revalidate_disk_zones() before executing the zone report. The zone
report callback function blk_revalidate_zone_cb() is also modified to
add a check that a zone start is below the device capacity.
The check that the zone size is a power of 2 number of sectors is moved
to blk_revalidate_disk_zones() as the zone size is already known.
Similarly, the number of zones of the device can be calculated in
blk_revalidate_disk_zones() before executing the zone report.
The kdoc comment for blk_revalidate_disk_zones() is also updated to
mention that device drivers must set the device zone size and the
max_zone_append_sectors queue limit before calling this function.
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
In virtblk_probe_zoned_device(), execute blk_queue_chunk_sectors() and
blk_queue_max_zone_append_sectors() to respectively set the zoned device
zone size and maximum zone append sector limit before executing
blk_revalidate_disk_zones(). This is to allow the block layer zone
reavlidation to check these device characteristics prior to checking all
zones of the device.
Signed-off-by: Damien Le Moal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Bart Van Assche <[email protected]>
Reviewed-by: Dmitry Fomichev <[email protected]>
Reviewed-by: Johannes Thumshirn <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|