aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-01drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 supportSebastian Reichel1-0/+25
UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find proper documentation for the panel apart from a technical drawing, but according to the vendor U-Boot it is based on a Sitronix st7789v chip. I generated the init sequence by modifying the default one until proper graphics output has been seen on the device. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: avoid hardcoding polarity infoSebastian Reichel1-4/+18
Add polarity information via mode and bus flags, so that they are no longer hardcoded and forward the information to the DRM stack. This is required for adding panels with different settings. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: avoid hardcoding invert modeSebastian Reichel1-1/+9
While the default panel uses invert mode, some panels require non-invert mode instead. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: add media bus formatSebastian Reichel1-3/+23
Add support for describing the media bus format in the panel configuration and expose that to userspace. Since both supported formats (RGB565 and RGB666) are using 6 bits per color also hardcode that information. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: avoid hardcoding panel sizeSebastian Reichel1-2/+4
Move the panel size information to the mode struct, so that different panel sizes can be specified depending on the panel type. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: avoid hardcoding mode infoSebastian Reichel1-6/+18
Avoid hard-coding the default_mode and supply it from match data. One additional layer of abstraction has been introduced, which will be needed for specifying other panel information (e.g. bus flags) in the next steps. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: improve error handlingSebastian Reichel1-11/+12
Improve error handling in the probe routine, so that probe defer errors are captured in /sys/kernel/debug/devices_deferred Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: simplify st7789v_spi_writeSebastian Reichel1-5/+1
st7789v_spi_write initializes a message with just a single transfer, spi_sync_transfer can be used for that. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: make reset GPIO optionalSebastian Reichel1-1/+1
The reset pin might not be software controllable from the SoC, so make it optional. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: remove unused constantsSebastian Reichel1-3/+0
ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/panel: sitronix-st7789v: add SPI ID tableSebastian Reichel1-0/+7
SPI device drivers should also have a SPI ID table. Reviewed-by: Michael Riesch <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01dt-bindings: display: st7789v: add Inanbo T28CP45TN89Sebastian Reichel1-2/+3
Add compatible value for Inanbo t28cp45tn89 and make reset GPIO non mandatory, since it might not be connected to the CPU. Reviewed-by: Michael Riesch <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01dt-bindings: vendor-prefixes: add InanboSebastian Reichel1-0/+2
Shenzhen INANBO Electronic Technology Co., Ltd. manufacturers TFT/OLED LCD panels. Reviewed-by: Michael Riesch <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/tests: Alloc drm_device on drm_exec testsArthur Grillo1-7/+37
The drm_exec tests where crashing[0] because of a null dereference. This is caused by a new access of the `driver` attribute of `struct drm_driver` on drm_gem_private_object_init(). Alloc the drm_device to fix that. [0] [15:05:24] ================== drm_exec (6 subtests) =================== [15:05:24] [PASSED] sanitycheck ^CERROR:root:Build interruption occurred. Cleaning console. [15:05:50] [ERROR] Test: drm_exec: missing expected subtest! [15:05:50] BUG: kernel NULL pointer dereference, address: 00000000000000b0 [15:05:50] #PF: supervisor read access in kernel mode [15:05:50] #PF: error_code(0x0000) - not-present page [15:05:50] PGD 0 P4D 0 [15:05:50] Oops: 0000 [#1] PREEMPT NOPTI [15:05:50] CPU: 0 PID: 23 Comm: kunit_try_catch Tainted: G N 6.4.0-rc7-02032-ge6303f323b1a #69 [15:05:50] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014 [15:05:50] RIP: 0010:drm_gem_private_object_init+0x60/0xc0 Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings") Signed-off-by: Arthur Grillo <[email protected]> Tested-by: Danilo Krummrich <[email protected]> Acked-by: Danilo Krummrich <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-08-01drm/virtio: Support sync objectsDmitry Osipenko3-2/+241
Add sync object DRM UAPI support to VirtIO-GPU driver. Sync objects support is needed by native context VirtIO-GPU Mesa drivers, it also will be used by Venus and Virgl contexts. Reviewed-by; Emil Velikov <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Tested-by: Pierre-Eric Pelloux-Prayer <[email protected]> # amdgpu nctx Tested-by: Rob Clark <[email protected]> # freedreno nctx Reviewed-by: Rob Clark <[email protected]> Acked-by: Gurchetan Singh <[email protected]> Acked-by: Gerd Hoffmann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31fbdev: Align deferred I/O with naming of helpersThomas Zimmermann9-26/+26
Deferred-I/O generator macros generate callbacks for struct fb_ops that operate on memory ranges in I/O address space or system address space. Rename the macros to use the _IOMEM_ and _SYSMEM_ infixes of their underlying helpers. Adapt all users. No functional changes. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31fbdev: Use _DMAMEM_ infix for DMA-memory helpersThomas Zimmermann10-15/+15
Change the infix for fbdev's DMA-memory helpers from _DMA_ to _DMAMEM_. The helpers perform operations within DMA-able memory, but they don't perform DMA operations. Naming should make this clear. Adapt all users. No functional changes. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31fbdev: Use _SYSMEM_ infix for system-memory helpersThomas Zimmermann5-12/+12
Change the infix for fbdev's system-memory helpers from _SYS_ to _SYSMEM_. The helpers perform operations within system memory, but not on the state of the operating system itself. Naming should make this clear. Adapt all users. No functional changes. Suggested-by: Helge Deller <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31fbdev: Use _IOMEM_ infix for I/O-memory helpersThomas Zimmermann9-16/+16
Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_ to distiguish them from other types of I/O, such as file operations. The helpers operate on memory ranges in the I/O address space and the naming should make this clear. Adapt all users. No functional changes. Suggested-by: Helge Deller <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Acked-by: Helge Deller <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01Marek Vasut1-1/+3
The connector type and pixel format are missing for this panel, add them to prevent various drivers from failing to determine either of those parameters. Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01") Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/panel: Support for startek-kd070fhfid015 MIPI-DSI panelGuillaume La Roque3-0/+418
This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD display using MIPI DSI interface. Signed-off-by: Guillaume La Roque <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Alexandre Mergnat <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31dt-bindings: display: panel: add startek kd070fhfid015 supportAlexandre Mergnat1-0/+69
The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution of 1024 x 600 pixels. Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Alexandre Mergnat <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/panel: ilitek-ili9881c: Add TDO TL050HDV35 LCD panelMatus Gajdos1-0/+194
Add support for TDO TL050HDV35-H1311A LCD panel. Signed-off-by: Matus Gajdos <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31dt-bindings: ili9881c: Add TDO TL050HDV35 LCD panelMatus Gajdos1-0/+1
Add support for TDO TL050HDV35-H1311A LCD panel. Signed-off-by: Matus Gajdos <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm: panel: simple: specify bpc for powertip_ph800480t013_idf02Dmitry Baryshkov1-0/+1
Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm code from complaining about unexpected bpc value (0). Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/panel: r66451: select CONFIG_DRM_DISPLAY_DP_HELPERArnd Bergmann1-0/+2
The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled: x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable': panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack' Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to ensure the helper function is always available. Fixes: a6dfab2738fc ("drm/panel: Add driver for Visionox r66451 panel") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Jessica Zhang <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/vc4: tests: pv-muxing: Document test scenarioMaxime Ripard1-0/+22
We've had a couple of tests that weren't really obvious, nor did they document what they were supposed to test. Document that to make it hopefully more obvious. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/vc4: tests: Switch to atomic state allocation helperMaxime Ripard1-47/+8
Now that we have a helper that takes care of an atomic state allocation and cleanup, we can migrate to it to simplify our tests. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/vc4: tests: pv-muxing: Switch to managed locking initMaxime Ripard1-23/+19
The new helper to init the locking context allows to remove some boilerplate. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/vc4: tests: mock: Use a kunit action to unregister DRM deviceMaxime Ripard2-6/+12
The *_mock_device functions allocate a DRM device that needs to be released using drm_dev_unregister. Now that we have a kunit release action API, we can switch to it and don't require any kind of garbage collection from the caller. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/vc4: tests: pv-muxing: Remove call to drm_kunit_helper_free_device()Maxime Ripard1-4/+0
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: helpers: Create a helper to allocate an atomic stateMaxime Ripard2-0/+51
As we gain more tests, boilerplate to allocate an atomic state and free it starts to be there more and more as well. In order to reduce the allocation boilerplate, we can create a helper to create that atomic state, and call an action when the test is done. This will also clean up the exit path. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: helpers: Create a helper to allocate a locking ctxMaxime Ripard2-0/+43
As we get more and more tests, the locking context initialisation creates more and more boilerplate, both at creation and destruction. Let's create a helper that will allocate, initialise a context, and register kunit actions to clean up once the test is done. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: probe-helper: Remove call to drm_kunit_helper_free_device()Maxime Ripard1-8/+0
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: modes: Remove call to drm_kunit_helper_free_device()Maxime Ripard1-8/+0
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: client-modeset: Remove call to drm_kunit_helper_free_device()Maxime Ripard1-8/+0
Calling drm_kunit_helper_free_device() to clean up the resources allocated by drm_kunit_helper_alloc_device() is now optional and not needed in most cases. Remove it. Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/tests: helpers: Switch to kunit actionsMaxime Ripard1-4/+50
Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Maxime Ripard <[email protected]>
2023-07-31drm/bridge: fix -Wunused-const-variable= warningZhu Wang6-8/+6
When building with W=1, the following warning occurs. drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = { ^~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = { When CONFIG_IO is disabled, above two variables are not used, since the place where it is used is inclueded in the macro CONFIG_OF. Even for drivers that do not depend on CONFIG_OF, it's almost always better to leave out the of_match_ptr(), since the only thing it can possibly do is to save a few bytes of .text if a driver can be used both with and without it. Hence we remove all of_match_ptr() used in other places. Fixes: 0647e7dd3f7a ("drm/bridge: Add Analogix anx78xx support") Signed-off-by: Zhu Wang <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Acked-by: Uwe Kleine-König <[email protected]> Signed-off-by: Robert Foss <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-31drm/ssd130x: clean up some inconsistent indentingJiapeng Chong1-1/+1
No functional modification involved. drivers/gpu/drm/solomon/ssd130x.c:715 ssd130x_primary_plane_duplicate_state() warn: inconsistent indenting. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6034 Signed-off-by: Jiapeng Chong <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-29drm: Fix references to drm_plane_helper_check_state()Geert Uytterhoeven2-2/+4
As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state() into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer exists, but is part of drm_atomic_helper_check_plane_state(). Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/8bb42a92fc20e3d11e5847e7f15a47c687b73104.1689779916.git.geert+renesas@glider.be
2023-07-29drm: Remove references to removed transitional helpersGeert Uytterhoeven3-42/+23
The transitional helpers were removed a long time ago, but some references stuck. Remove them. Fixes: 21ebe615c16994f3 ("drm: Remove transitional helpers") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ad4a2f1f9fa7da083132f6c35469c77a3f9e2f0e.1689779916.git.geert+renesas@glider.be
2023-07-29drm/todo: Convert list of fbconv links to footnotesGeert Uytterhoeven1-6/+6
Convert the references to fbconv links to footnotes, so they can be navigated. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/0761f98d3b6f8df9eea977eae063e35b450fda9e.1689779916.git.geert+renesas@glider.be
2023-07-29drm/todo: Add atomic modesetting referencesGeert Uytterhoeven1-3/+7
The section about converting existing KMS drivers to atomic modesetting mentions the existence of a conversion guide, but does not reference it. While the guide is old and rusty, it still contains useful information, so add a link to it. Also link to the LWN.net articles that give an overview about the atomic mode setting design. While at it, remove the reference to unconverted virtual HW drivers, as they've been converted. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/6809d0fda0716892cbccf0ee272481032251026d.1689779916.git.geert+renesas@glider.be
2023-07-29drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()Geert Uytterhoeven1-1/+1
As the temporary buffer is no longer used to store 8-bit grayscale data, its size can be reduced to the size needed to store the monochrome bitmap data. Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-29drm/armada: Fix off-by-one error in armada_overlay_get_property()Geert Uytterhoeven1-2/+4
As ffs() returns one more than the index of the first bit set (zero means no bits set), the color key mode value is shifted one position too much. Fix this by using FIELD_GET() instead. Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
2023-07-29drm: Spelling s/randevouz/rendez-vous/Geert Uytterhoeven1-1/+1
Fix a misspelling of "rendez-vous". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/084bf178dd676a4f07933eb9fcd04d3e30a779ba.1689600209.git.geert+renesas@glider.be
2023-07-29drm: Spelling s/sempahore/semaphore/Geert Uytterhoeven4-4/+4
Fix misspellings of "semaphore". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/8b0542c12a2427f34a792c41ac2d2a2922874bfa.1689600102.git.geert+renesas@glider.be
2023-07-29drm/udl: Convert to drm_crtc_helper_atomic_check()Geert Uytterhoeven1-11/+2
Use the drm_crtc_helper_atomic_check() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sui Jingfeng <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/dcb09c0c7bed1baee39a72caba098a399ce7f063.1689599767.git.geert+renesas@glider.be
2023-07-29drm/bridge_connector: Handle drm_connector_init_with_ddc() failuresGeert Uytterhoeven1-2/+9
drm_connector_init_with_ddc() can fail, but the call in drm_bridge_connector_init() does not check that. Fix this by adding the missing error handling. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/3a7e9540d8dc94298d021aa2fb046ae8616ca4dd.1689599701.git.geert+renesas@glider.be
2023-07-28drm/nouveau/nvkm/dp: Add workaround to fix DP 1.3+ DPCD issuesLyude Paul1-1/+47
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to the drm_dp_aux structure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector. Ideally in order to fix this, we just want to use the drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible though, and is going to depend on having a bunch of the DP code moved out of nvkm and into the DRM side of things as part of the GSP enablement work. Until then however, let's workaround this problem by porting a copy of drm_dp_read_dpcd_caps() into NVKM - which should fix this issue. Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.