aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-12-12Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()Yang Yingliang1-3/+3
It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()Wang ShaoBo1-2/+3
skb allocated by __hci_cmd_sync would not be used whether in checking for supported iBT hardware variants or after, we should free it in all error branches, this patch makes the case read version failed or default error case free skb before return. Fixes: c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version") Fixes: 019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices") Signed-off-by: Wang ShaoBo <[email protected]> Reviewed-by: Tedd Ho-Jeong An <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_conn: Fix crash on hci_create_cis_syncLuiz Augusto von Dentz1-1/+1
When attempting to connect multiple ISO sockets without using DEFER_SETUP may result in the following crash: BUG: KASAN: null-ptr-deref in hci_create_cis_sync+0x18b/0x2b0 Read of size 2 at addr 0000000000000036 by task kworker/u3:1/50 CPU: 0 PID: 50 Comm: kworker/u3:1 Not tainted 6.0.0-rc7-02243-gb84a13ff4eda #4373 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-1.fc36 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x19/0x27 kasan_report+0xbc/0xf0 ? hci_create_cis_sync+0x18b/0x2b0 hci_create_cis_sync+0x18b/0x2b0 ? get_link_mode+0xd0/0xd0 ? __ww_mutex_lock_slowpath+0x10/0x10 ? mutex_lock+0xe0/0xe0 ? get_link_mode+0xd0/0xd0 hci_cmd_sync_work+0x111/0x190 process_one_work+0x427/0x650 worker_thread+0x87/0x750 ? process_one_work+0x650/0x650 kthread+0x14e/0x180 ? kthread_exit+0x50/0x50 ret_from_fork+0x22/0x30 </TASK> Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btintel: Fix existing sparce warningsLuiz Augusto von Dentz1-8/+8
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btintel.c:1041:38: warning: cast to restricted __le32 drivers/bluetooth/btintel.c:1786:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1795:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1796:25: warning: cast to restricted __le16 drivers/bluetooth/btintel.c:1797:25: warning: cast to restricted __le16 Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Fix existing sparce warningLuiz Augusto von Dentz1-1/+1
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btusb.c:3426:28: warning: cast to restricted __le32 Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Fix new sparce warningsLuiz Augusto von Dentz1-12/+13
This fix the following warnings detect with make W=1 C=1: drivers/bluetooth/btusb.c:2212:9: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2212:9: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2245:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2249:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2253:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2257:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2261:18: warning: cast to restricted __le16 drivers/bluetooth/btusb.c:2267:18: warning: cast to restricted __le16 Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CUGongwei Li1-0/+4
* /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b85b Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Gongwei Li <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559Artem Lukyanov1-0/+4
Add the support ID(0x0cb8, 0xc559) to usb_device_id table for Realtek RTL8852BE. The device info from /sys/kernel/debug/usb/devices as below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cb8 ProdID=c559 Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Artem Lukyanov <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12dt-bindings: net: realtek-bluetooth: Add RTL8723DSSamuel Holland1-0/+1
RTL8723DS is another variant of the RTL8723 WiFi + Bluetooth chip. It is already supported by the hci_uart/btrtl driver. Document the compatible. Acked-by: Rob Herring <[email protected]> Reviewed-by: Alistair Francis <[email protected]> Signed-off-by: Samuel Holland <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922Andy Chi1-0/+3
Add VID/PID 0489/e0f2 for MediaTek MT7922 Bluetooth chip. Found and tested with HP ProBook. From /sys/kernel/debug/usb/devices: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f2 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Andy Chi <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12dt-bindings: bluetooth: broadcom: add BCM43430A0 & BCM43430A1Luca Weiss1-0/+2
Document the compatible string for BCM43430A0 bluetooth used in lg-lenok and BCM43430A1 used in asus-sparrow. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in ↵Yang Yingliang1-1/+1
bcm4377_probe() pci_disable_device() need be called while module exiting, switch to use pcim_enable(), pci_disable_device() will be called in pcim_release() after probe() failure. Fixes: ab80b2cec05f ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Add Realtek 8761BUV support ID 0x2B89:0x8761Raman Varabets1-0/+2
Identifies as "Realtek Bluetooth Radio"; used in UGREEN CM390 (P/N 80889). Device description at /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2b89 ProdID=8761 Rev= 2.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00E04C239987 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Raman Varabets <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boardsSven Peter4-0/+2528
Broadcom BCM4377/4378/4387 are dual WiFi/Bluetooth boards found in Apple machines. This driver adds support for the Bluetooth function which exposes a shared memory IPC protocol over PCIe to tunnel HCI traffic. Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Add quirk to disable MWS Transport ConfigurationSven Peter3-1/+14
Broadcom 4378/4387 controllers found in Apple Silicon Macs claim to support getting MWS Transport Layer Configuration, < HCI Command: Read Local Supported... (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) [...] Get MWS Transport Layer Configuration (Octet 30 - Bit 3)] [...] , but then don't actually allow the required command: > HCI Event: Command Complete (0x0e) plen 15 Get MWS Transport Layer Configuration (0x05|0x000c) ncmd 1 Status: Command Disallowed (0x0c) Number of transports: 0 Baud rate list: 0 entries 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Add quirk to disable extended scanningSven Peter2-1/+13
Broadcom 4377 controllers found in Apple x86 Macs with the T2 chip claim to support extended scanning when querying supported states, < HCI Command: LE Read Supported St.. (0x08|0x001c) plen 0 > HCI Event: Command Complete (0x0e) plen 12 LE Read Supported States (0x08|0x001c) ncmd 1 Status: Success (0x00) States: 0x000003ffffffffff [...] LE Set Extended Scan Parameters (Octet 37 - Bit 5) LE Set Extended Scan Enable (Octet 37 - Bit 6) [...] , but then fail to actually implement the extended scanning: < HCI Command: LE Set Extended Sca.. (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Unknown HCI Command (0x01) Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv ReportSven Peter2-1/+2
Broadcom controllers present on Apple Silicon devices use the upper 8 bits of the event type in the LE Extended Advertising Report for the channel on which the frame has been received. These bits are reserved according to the Bluetooth spec anyway such that we can just drop them to ensure that the advertising results are parsed correctly. The following excerpt from a btmon trace shows a report received on channel 37 by these controllers: > HCI Event: LE Meta Event (0x3e) plen 55 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x2513 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Reserved (0x2500) Legacy PDU Type: Reserved (0x2513) Address type: Public (0x00) Address: XX:XX:XX:XX:XX:XX (Shenzhen Jingxun Software [...]) Primary PHY: LE 1M Secondary PHY: No packets SID: no ADI field (0xff) TX power: 127 dBm RSSI: -76 dBm (0xb4) Periodic advertising interval: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1d [...] Flags: 0x18 Simultaneous LE and BR/EDR (Controller) Simultaneous LE and BR/EDR (Host) Company: Harman International Industries, Inc. (87) Data: [...] Service Data (UUID 0xfddf): Name (complete): JBL Flip 5 Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12arm64: dts: apple: t8103: Add Bluetooth controllerSven Peter6-0/+28
Add bluetooth controller nodes and the required brcm,board-type properties to be able to select the correct firmware to all board device trees. Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12dt-bindings: net: Add Broadcom BCM4377 family PCIe BluetoothSven Peter2-0/+82
These chips are combined Wi-Fi/Bluetooth radios which expose a PCI subfunction for the Bluetooth part. They are found in Apple machines such as the x86 models with the T2 chip or the arm64 models with the M1 or M2 chips. Signed-off-by: Sven Peter <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12dt-bindings: net: Add generic Bluetooth controllerSven Peter4-13/+35
Bluetooth controllers share the common local-bd-address property. Add a generic YAML schema to replace bluetooth.txt for those. Signed-off-by: Sven Peter <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_bcm: Add CYW4373A0 supportMarek Vasut1-1/+12
CYW4373A0 is a Wi-Fi + Bluetooth combo device from Cypress. This chip is present e.g. on muRata 2AE module. This chip has additional quirk where the HCI command 0xfc45, used on older chips to switch UART clock from 24 MHz to 48 MHz, to support baudrates over 3 Mbdps, is no longer recognized by this newer chip. This newer chip can configure the 4 Mbdps baudrate without the need to issue HCI command 0xfc45, so add flag to indicate this and do not issue the command on this chip to avoid failure to set 4 Mbdps baud rate. It is not clear whether there is a way to determine which chip does and which chip does not support the HCI command 0xfc45, other than trial and error. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12dt-bindings: net: broadcom-bluetooth: Add CYW4373A0 DT bindingMarek Vasut1-0/+1
CYW4373A0 is a Wi-Fi + Bluetooth combo device from Cypress. This chip is present e.g. on muRata 2AE module. Extend the binding with its DT compatible. Acked-by: Rob Herring <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Use kzalloc instead of kmalloc/memsetKang Minchul1-4/+2
Replace kmalloc+memset by kzalloc for better readability and simplicity. This addresses the cocci warning below: WARNING: kzalloc should be used for d, instead of kmalloc/memset Signed-off-by: Kang Minchul <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Add more device IDs for WCN6855Shengyu Qu1-0/+84
Add IDs to usb_device_id table for WCN6855. IDs are extracted from Windows driver of Lenovo Thinkpad T14 Gen 2(Driver version 1.0.0.1205 Windows 10) Windows driver download address: https://pcsupport.lenovo.com/us/en/products/laptops-and-netbooks/ thinkpad-t-series-laptops/thinkpad-t14-gen-2-type-20xk-20xl/downloads /driver-list/ Signed-off-by: Shengyu Qu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Fix EALREADY and ELOOP cases in bt_status()Christophe JAILLET1-2/+2
'err' is known to be <0 at this point. So, some cases can not be reached because of a missing "-". Add it. Fixes: ca2045e059c3 ("Bluetooth: Add bt_status") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Add CONFIG_BT_LE_L2CAP_ECREDLuiz Augusto von Dentz2-1/+12
This adds CONFIG_BT_LE_L2CAP_ECRED which can be used to enable L2CAP Enhanced Credit Flow Control Mode by default, previously it was only possible to set it via module parameter (e.g. bluetooth.enable_ecred=1). Since L2CAP ECRED mode is required by the likes of EATT which is recommended for LE Audio this enables it by default. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-By: Tedd Ho-Jeong An <[email protected]>
2022-12-12Bluetooth: btusb: Default CONFIG_BT_HCIBTUSB_POLL_SYNC=yLuiz Augusto von Dentz1-0/+1
poll_sync has been proven to fix races of USB data and event endpoints so this enables it by default. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Tedd Ho-Jeong An <[email protected]>
2022-12-12Bluetooth: btusb: Add CONFIG_BT_HCIBTUSB_POLL_SYNCLuiz Augusto von Dentz2-0/+13
This adds CONFIG_BT_HCIBTUSB_POLL_SYNC which can be used to set the default behavior of Bluetooth USB controller with respect to poll synchronization of its endpoits. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Tedd Ho-Jeong An <[email protected]>
2022-12-12virtio_bt: Fix alignment in configuration structIgor Skalkin2-3/+21
The current version of the configuration structure has unaligned 16-bit fields, but according to the specification [1], access to the configuration space must be aligned. Add a second, aligned version of the configuration structure and a new feature bit indicating that this version is being used. [1] https://docs.oasis-open.org/virtio/virtio/v1.1/virtio-v1.1.pdf Signed-off-by: Igor Skalkin <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMSInga Stotland1-1/+1
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS command, use the correct op code in error status report: was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS. Fixes: 12410572833a2 ("Bluetooth: Break add adv into two mgmt commands") Signed-off-by: Inga Stotland <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_core: fix error handling in hci_register_dev()Yang Yingliang1-1/+1
If hci_register_suspend_notifier() returns error, the hdev and rfkill are leaked. We could disregard the error and print a warning message instead to avoid leaks, as it just means we won't be handing suspend requests. Fixes: 9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: Use kzalloc instead of kmalloc/memsetJiapeng Chong1-2/+1
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. ./net/bluetooth/hci_conn.c:2038:6-13: WARNING: kzalloc should be used for cp, instead of kmalloc/memset. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2406 Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_qca: only assign wakeup with serial port supportZhengping Jiang1-1/+2
Only assign hdev->wakeup if the serial port supports wakeup. Otherwise it will fall back to the hci_uart_wakeup or the behavior that can be overridden before calling the hci_uart_register_device(). Signed-off-by: Zhengping Jiang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_conn: use HCI dst_type values also for BISPauli Virtanen2-8/+4
For ISO BIS related functions in hci_conn.c, make dst_type values be HCI address type values, not ISO socket address type values. This makes it consistent with CIS functions. Signed-off-by: Pauli Virtanen <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chipHilda Wu2-2/+30
For USB ALT 6 settings some Realtek chips need to transmit mSBC data continuously without the zero length of USB packets. In this commit, create BTUSB_ALT6_CONTINUOUS_TX to manage the behavior. Therefore, create REALTEK_ALT6_CONTINUOUS_TX_CHIP to manage the specific chip model for the behavior. Signed-off-by: Max Chou <[email protected]> Signed-off-by: Hilda Wu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btrtl: Add btrealtek data structHilda Wu2-0/+24
This patch adds a data structure for btrealtek object, and the definition of vendor behavior flags. It also adds macros to set/test/get the flags. Signed-off-by: Hilda Wu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: virtio_bt: fix device removalMichael S. Tsirkin1-2/+17
Device removal is clearly out of virtio spec: it attempts to remove unused buffers from a VQ before invoking device reset. To fix, make open/close NOPs and do all cleanup/setup in probe/remove. NB: This is a hacky way to handle this - virtbt_{open,close} as NOP is not really what a driver is supposed to be doing. These are transport enable/disable callbacks from the BT core towards the driver. It maps to a device being enabled/disabled by something like bluetoothd for example. So if disabled, users expect that no resources/queues are in use. It does work with all other transports like USB, SDIO, UART etc. There should be no buffer used if the device is powered off. We also don’t have any USB URBs in-flight if the transport is not active. The way to implement a proper fix would be using vq reset if supported, or even using a full device reset. The cost of the hack is a single skb wasted on an unused bt device. NB2: with this fix in place driver still suffers from a race condition if an interrupt triggers while device is being reset. To fix, in the virtbt_close() callback we should deactivate all interrupts. To be fixed. squashed fixup: bluetooth: virtio_bt: fix an error code in probe() Signed-off-by: Dan Carpenter <[email protected]> Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Message-Id: <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Igor Skalkin <[email protected]>
2022-12-12Bluetooth: hci_sync: cancel cmd_timer if hci_open failedArchie Pusaka1-0/+1
If a command is already sent, we take care of freeing it, but we also need to cancel the timeout as well. Signed-off-by: Archie Pusaka <[email protected]> Reviewed-by: Abhishek Pandit-Subedi <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: hci_sync: Fix not able to set force_static_addressLuiz Augusto von Dentz1-1/+1
force_static_address shall be writable while hdev is initing but is not considered powered yet since the static address is written only when powered. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Brian Gix <[email protected]>
2022-12-12Bluetooth: hci_sync: Fix not setting static addressLuiz Augusto von Dentz1-0/+18
This attempts to program the address stored in hdev->static_addr after the init sequence has been complete: @ MGMT Command: Set Static A.. (0x002b) plen 6 Address: C0:55:44:33:22:11 (Static) @ MGMT Event: Command Complete (0x0001) plen 7 Set Static Address (0x002b) plen 4 Status: Success (0x00) Current settings: 0x00008200 Low Energy Static Address @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00008200 Low Energy Static Address < HCI Command: LE Set Random.. (0x08|0x0005) plen 6 Address: C0:55:44:33:22:11 (Static) > HCI Event: Command Complete (0x0e) plen 4 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) @ MGMT Event: Command Complete (0x0001) plen 7 Set Powered (0x0005) plen 4 Status: Success (0x00) Current settings: 0x00008201 Powered Low Energy Static Address @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00008201 Powered Low Energy Static Address Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Brian Gix <[email protected]>
2022-12-12Bluetooth: Work around SCO over USB HCI design defectNicolas Cavallari1-2/+33
The USB interface between the host and the bluetooth adapter used for SCO packets uses an USB isochronous endpoint with a fragmentation scheme that does not tolerate errors. Except USB isochronous transfers do not provide a reliable stream with guaranteed delivery. (There is no retry on error, see USB spec v2.0 5.6 and 8.5.5.) To fragment a packet, the bluetooth HCI simply splits it in parts and transfer them as-is. The receiver is expected to reconstruct the packet by assuming the first fragment contains the header and parsing its size field. There is no error detection either. If a fragment is lost, the end result is that the kernel is no longer synchronized and will pass malformed data to the upper layers, since it has no way to tell if the first fragment is an actual first fragment or a continuation fragment. Resynchronization can only happen by luck and requires an unbounded amount of time. The typical symptom for a HSP/HFP bluetooth headset is that the microphone stops working and dmesg contains piles of rate-limited "Bluetooth: hci0: SCO packet for unknown connection handle XXXX" errors for an indeterminate amount of time, until the kernel accidentally resynchronize. A workaround is to ask the upper layer to prevalidate the first fragment header. This is not possible with user channels so this workaround is disabled in this case. This problem is the most severe when using an ath3k adapter on an i.MX 6 board, where packet loss occur regularly, possibly because it is an USB1 device connected on an USB2 hub and this is a special case requiring split transactions. Signed-off-by: Nicolas Cavallari <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Bluetooth: btusb: Introduce generic USB resetArchie Pusaka2-10/+26
On cmd_timeout with no reset_gpio, reset the USB port as a last resort. This patch changes the behavior of btusb_intel_cmd_timeout and btusb_rtl_cmd_timeout. Signed-off-by: Archie Pusaka <[email protected]> Reviewed-by: Abhishek Pandit-Subedi <[email protected]> Reviewed-by: Ying Hsu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12btusb: Avoid reset of ISOC endpoint alt settings to zeroChethan Tumkur Narayan1-2/+3
In case of suspend/resume and HCI_RESET (BT On and Off), ISOC endpoint set to alt setting 0 when no SCO connection exists. This patch shall avoid resetting of ISOC endpoint to alt setting to 0. Signed-off-by: Chethan Tumkur Narayan <[email protected]> Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2022-12-12Merge tag 'x86_sgx_for_6.2' of ↵Linus Torvalds9-28/+66
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 sgx updates from Dave Hansen: "The biggest deal in this series is support for a new hardware feature that allows enclaves to detect and mitigate single-stepping attacks. There's also a minor performance tweak and a little piece of the kmap_atomic() -> kmap_local() transition. Summary: - Introduce a new SGX feature (Asynchrounous Exit Notification) for bare-metal enclaves and KVM guests to mitigate single-step attacks - Increase batching to speed up enclave release - Replace kmap/kunmap_atomic() calls" * tag 'x86_sgx_for_6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Replace kmap/kunmap_atomic() calls KVM/VMX: Allow exposing EDECCSSA user leaf function to KVM guest x86/sgx: Allow enclaves to use Asynchrounous Exit Notification x86/sgx: Reduce delay and interference of enclave release
2022-12-12Merge tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxlLinus Torvalds49-836/+2649
Pull cxl updates from Dan Williams: "Compute Express Link (CXL) updates for 6.2. While it may seem backwards, the CXL update this time around includes some focus on CXL 1.x enabling where the work to date had been with CXL 2.0 (VH topologies) in mind. First generation CXL can mostly be supported via BIOS, similar to DDR, however it became clear there are use cases for OS native CXL error handling and some CXL 3.0 endpoint features can be deployed on CXL 1.x hosts (Restricted CXL Host (RCH) topologies). So, this update brings RCH topologies into the Linux CXL device model. In support of the ongoing CXL 2.0+ enabling two new core kernel facilities are added. One is the ability for the kernel to flag collisions between userspace access to PCI configuration registers and kernel accesses. This is brought on by the PCIe Data-Object-Exchange (DOE) facility, a hardware mailbox over config-cycles. The other is a cpu_cache_invalidate_memregion() API that maps to wbinvd_on_all_cpus() on x86. To prevent abuse it is disabled in guest VMs and architectures that do not support it yet. The CXL paths that need it, dynamic memory region creation and security commands (erase / unlock), are disabled when it is not present. As for the CXL 2.0+ this cycle the subsystem gains support Persistent Memory Security commands, error handling in response to PCIe AER notifications, and support for the "XOR" host bridge interleave algorithm. Summary: - Add the cpu_cache_invalidate_memregion() API for cache flushing in response to physical memory reconfiguration, or memory-side data invalidation from operations like secure erase or memory-device unlock. - Add a facility for the kernel to warn about collisions between kernel and userspace access to PCI configuration registers - Add support for Restricted CXL Host (RCH) topologies (formerly CXL 1.1) - Add handling and reporting of CXL errors reported via the PCIe AER mechanism - Add support for CXL Persistent Memory Security commands - Add support for the "XOR" algorithm for CXL host bridge interleave - Rework / simplify CXL to NVDIMM interactions - Miscellaneous cleanups and fixes" * tag 'cxl-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (71 commits) cxl/region: Fix memdev reuse check cxl/pci: Remove endian confusion cxl/pci: Add some type-safety to the AER trace points cxl/security: Drop security command ioctl uapi cxl/mbox: Add variable output size validation for internal commands cxl/mbox: Enable cxl_mbox_send_cmd() users to validate output size cxl/security: Fix Get Security State output payload endian handling cxl: update names for interleave ways conversion macros cxl: update names for interleave granularity conversion macros cxl/acpi: Warn about an invalid CHBCR in an existing CHBS entry tools/testing/cxl: Require cache invalidation bypass cxl/acpi: Fail decoder add if CXIMS for HBIG is missing cxl/region: Fix spelling mistake "memergion" -> "memregion" cxl/regs: Fix sparse warning cxl/acpi: Set ACPI's CXL _OSC to indicate RCD mode support tools/testing/cxl: Add an RCH topology cxl/port: Add RCD endpoint port enumeration cxl/mem: Move devm_cxl_add_endpoint() from cxl_core to cxl_mem tools/testing/cxl: Add XOR Math support to cxl_test cxl/acpi: Support CXL XOR Interleave Math (CXIMS) ...
2022-12-12Merge tag 'thermal-6.2-rc1' of ↵Linus Torvalds12-142/+256
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These include thermal core fixes to protect thermal device operations against thermal device removal, other thermal core fixes and updates of Intel thermal control drivers. Specifics: - Fix race conditions related to thermal device operations that are not protected against thermal device removal (Guenter Roeck) - Fix error code in __thermal_cooling_device_register() (Dan Carpenter) - Validate new cooling device state (coming from user space) in cur_state_store() and reuse the max_state value from cooling device structure in the sysfs interface (Viresh Kumar) - Fix some possible name leaks in error paths in the thermal control core code (Yang Yingliang) - Detect TCC lock bit set in the intel_tcc_cooling driver and make it refuse to update the TCC offset in that case (Zhang Rui) - Add TCC cooling support for RaptorLake-S (Zhang Rui) - Prevent accidental clearing of HFI status by one of the other drivers using the same status register (Srinivas Pandruvada) - Protect clearing of thermal status bits in Intel thermal control drivers (Srinivas Pandruvada) - Allow the HFI thermal control driver to ACK an HFI event for the previously observed timestamp (Srinivas Pandruvada) - Remove a pointless die_id check from the HFI thermal driver and adjust the definition a data structure used by it (Ricardo Neri)" * tag 'thermal-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel: hfi: Remove a pointless die_id check thermal: core: fix some possible name leaks in error paths thermal: intel: hfi: ACK HFI for the same timestamp thermal: intel: Protect clearing of thermal status bits thermal: intel: Prevent accidental clearing of HFI status thermal/core: Protect thermal device operations against thermal device removal thermal/core: Remove thermal_zone_set_trips() thermal/core: Protect sysfs accesses to thermal operations with thermal zone mutex thermal/core: Protect hwmon accesses to thermal operations with thermal zone mutex thermal/core: Introduce locked version of thermal_zone_device_update thermal/core: Move parameter validation from __thermal_zone_get_temp to thermal_zone_get_temp thermal/core: Ensure that thermal device is registered in thermal_zone_get_temp thermal/core: Delete device under thermal device zone lock thermal/core: Destroy thermal zone device mutex in release function thermal: intel: intel_tcc_cooling: Add TCC cooling support for RaptorLake-S thermal: intel: intel_tcc_cooling: Detect TCC lock bit thermal: intel: hfi: Improve the type of hfi_features::nr_table_pages thermal/core: fix error code in __thermal_cooling_device_register() thermal: sysfs: Reuse cdev->max_state thermal: Validate new state in cur_state_store()
2022-12-12Merge tag 'acpi-6.2-rc1' of ↵Linus Torvalds106-635/+1172
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and PNP updates from Rafael Wysocki: "These include new code (for instance, support for the FFH address space type and support for new firmware data structures in ACPICA), some new quirks (mostly related to backlight handling and I2C enumeration), a number of fixes and a fair amount of cleanups all over. Specifics: - Update the ACPICA code in the kernel to the 20221020 upstream version and fix a couple of issues in it: - Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki) - Add support for loong_arch-specific APICs in MADT (Huacai Chen) - Add support for fixed PCIe wake event (Huacai Chen) - Add EBDA pointer sanity checks (Vit Kabele) - Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele) - Add CCEL table support to both compiler/disassembler (Kuppuswamy Sathyanarayanan) - Add a couple of new UUIDs to the known UUID list (Bob Moore) - Add support for FFH Opregion special context data (Sudeep Holla) - Improve warning message for "invalid ACPI name" (Bob Moore) - Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table (Alison Schofield) - Prepare IORT support for revision E.e (Robin Murphy) - Finish support for the CDAT table (Bob Moore) - Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki) - Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao) - Update the version of the ACPICA code in the kernel (Bob Moore) - Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device enumeration code (Giulio Benetti) - Change the return type of the ACPI driver remove callback to void and update its users accordingly (Dawei Li) - Add general support for FFH address space type and implement the low- level part of it for ARM64 (Sudeep Holla) - Fix stale comments in the ACPI tables parsing code and make it print more messages related to MADT (Hanjun Guo, Huacai Chen) - Replace invocations of generic library functions with more kernel- specific counterparts in the ACPI sysfs interface (Christophe JAILLET, Xu Panda) - Print full name paths of ACPI power resource objects during enumeration (Kane Chen) - Eliminate a compiler warning regarding a missing function prototype in the ACPI power management code (Sudeep Holla) - Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong, Colin Ian King, Sudeep Holla) - Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC driver (Mia Kanashi) - Add some mew ACPI backlight handling quirks and update some existing ones (Hans de Goede) - Make the ACPI backlight driver prefer the native backlight control over vendor backlight control when possible (Hans de Goede) - Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König) - Use xchg_release() instead of cmpxchg() for updating new GHES cache slots (Ard Biesheuvel) - Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu) - Add new I2C device enumeration quirks for Medion Lifetab S10346 and Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede) - Make the ACPI battery driver notify user space about adding new battery hooks and removing the existing ones (Armin Wolf) - Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE() for freeing acpi_object structures to help diagnostics (Wang ShaoBo) - Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface code (ye xingchen) - Fix the _FIF package extraction failure handling in the ACPI fan driver (Hanjun Guo) - Fix the PCC mailbox handling error code path (Huisong Li) - Avoid using PCC Opregions if there is no platform interrupt allocated for this purpose (Huisong Li) - Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and CPPC library (ye xingchen) - Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng Wang) - Fix name memory leak in pnp_alloc_dev() (Yang Yingliang) - Do not disable PNP devices on suspend when they cannot be re-enabled on resume (Hans de Goede) - Clean up the ACPI thermal driver a bit (Rafael Wysocki)" * tag 'acpi-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (67 commits) ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346 ACPI: APEI: EINJ: Refactor available_error_type_show() ACPI: APEI: EINJ: Fix formatting errors ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value ACPI: processor: perflib: Rearrange acpi_processor_notify_smm() ACPI: processor: perflib: Rearrange unregistration routine ACPI: processor: perflib: Drop redundant parentheses ACPI: processor: perflib: Adjust white space ACPI: processor: idle: Drop unnecessary statements and parens ACPI: thermal: Adjust critical.flags.valid check ACPI: fan: Convert to use sysfs_emit_at() API ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() ACPI: battery: Call power_supply_changed() when adding hooks ACPI: use sysfs_emit() instead of scnprintf() ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F) ACPI: APEI: Remove a useless include PNP: Do not disable devices on suspend when they cannot be re-enabled on resume ACPI: processor: Silence missing prototype warnings ACPI: processor_idle: Silence missing prototype warnings ACPI: PM: Silence missing prototype warning ...
2022-12-12Merge tag 'pm-6.2-rc1' of ↵Linus Torvalds57-519/+3132
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include two new drivers (cpufreq driver for Apple SoC CPU P-states and the SCMI Powercap based power capping driver), other new hardware support and driver extensions (Qualcomm cpufreq driver and its DT bindings, TI cpufreq driver, intel_pstate, intel-uncore-freq), a bunch of fixes and cleanups all over and a cpupower utility update including new features related to RAPL support. Specifics: - Fix nasty and hard to debug race condition introduced by mistake in the runtime PM core code and clean up that code somewhat on top of the fix (Rafael Wysocki) - Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector Martin) - Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin) - Update Qualcomm cpufreq driver (Manivannan Sadhasivam, Chen Hui): - CPU clock provider support - Generic cleanups or reorganization - Potential memleak fix - Fix of the return value of cpufreq_driver->get() - Update Qualcomm cpufreq driver's DT bindings (Manivannan Sadhasivam, Rob Herring, Melody Olvera): - Support for CPU clock provider - Missing cache-related properties fixes - Support for QDU1000/QRU1000 - Add support for ti,am625 SoC and enable build of ti-cpufreq for ARCH_K3 (Dave Gerlach, and Vibhore Vardhan) - Use flexible array to simplify memory allocation in the tegra186 cpufreq driver (Christophe JAILLET) - Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen) - Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni Gherdovich) - Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver (Xiongfeng Wang) - Initialize the kobj_unregister completion before calling kobject_init_and_add() in the cpufreq core code (Yongqiang Liu) - Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes, Nathan Chancellor) - Make intel_pstate accept initial EPP value of 0x80 (Srinivas Pandruvada) - Make read-only array sys_clk_src in the SPEAr cpufreq driver static (Colin Ian King) - Make array speeds in the longhaul cpufreq driver static (Colin Ian King) - Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy Shevchenko) - Drop a reference to CVS from cpufreq documentation (Conghui Wang) - Improve kernel messages printed by the PSCI cpuidle driver (Ulf Hansson) - Make the DT cpuidle driver return the correct number of parsed idle states, clean it up and clarify a comment in it (Ulf Hansson) - Modify the tasks freezing code to avoid using pr_cont() and refine an error message printed by it (Rafael Wysocki) - Make the hibernation core code complain about memory map mismatches during resume to help diagnostics (Xueqin Luo) - Fix mistake in a kerneldoc comment in the hibernation code (xiongxin) - Reverse the order of performance and enabling operations in the generic power domains code (Abel Vesa) - Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the generic power domains code (Abel Vesa) - Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn Guo) - Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo) - Drop generic power domain status manipulation during hibernate restore (Shawn Guo) - Fix compiler warnings with make W=1 in the idle_inject power capping driver (Srinivas Pandruvada) - Use kstrtobool() instead of strtobool() in the power capping sysfs interface (Christophe JAILLET) - Add SCMI Powercap based power capping driver (Cristian Marussi) - Add Emerald Rapids support to the intel-uncore-freq driver (Artem Bityutskiy) - Repair slips in kernel-doc comments in the generic notifier code (Lukas Bulwahn) - Fix several DT issues in the OPP library reorganize code around opp-microvolt-<named> DT property (Viresh Kumar) - Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties to be present without the others present (James Calligeros) - Fix clock-latency-ns property in DT example (Serge Semin) - Add a private governor_data for devfreq governors (Kant Fan) - Reorganize devfreq code to use device_match_of_node() and devm_platform_get_and_ioremap_resource() instead of open coding them (ye xingchen, Minghao Chi) - Make cpupower choose base_cpu to display default cpupower details instead of picking CPU 0 (Saket Kumar Bhaskar) - Add Georgian translation to cpupower documentation (Zurab Kargareteli) - Introduce powercap intel-rapl library, powercap-info command, and RAPL monitor into cpupower (Thomas Renninger)" * tag 'pm-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) PM: runtime: Adjust white space in the core code cpufreq: Remove CVS version control contents from documentation cpufreq: stats: Convert to use sysfs_emit_at() API cpufreq: ACPI: Only set boost MSRs on supported CPUs PM: sleep: Refine error message in try_to_freeze_tasks() PM: sleep: Avoid using pr_cont() in the tasks freezing code PM: runtime: Relocate rpm_callback() right after __rpm_callback() PM: runtime: Do not call __rpm_callback() from rpm_idle() PM / devfreq: event: use devm_platform_get_and_ioremap_resource() PM / devfreq: event: Use device_match_of_node() PM / devfreq: Use device_match_of_node() powercap: idle_inject: Fix warnings with make W=1 PM: hibernate: Complain about memory map mismatches during resume dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq cpufreq: tegra186: Use flexible array to simplify memory allocation cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain cpupower: Introduce powercap intel-rapl library and powercap-info command cpupower: Add Georgian translation cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode cpufreq: amd_freq_sensitivity: Add missing pci_dev_put() ...
Powered by cgit, Gruvboxed by Blaster4385.