aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-19Merge tag 'mmc-v5.6-rc6' of ↵Linus Torvalds8-14/+117
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - rtsx_pci: Fix support for some various speed modes - sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2 - sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier - sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10 - sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320 * tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: rtsx_pci: Fix support for speed-modes that relies on tuning mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2 mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012) mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
2020-03-19arm64: compat: Fix syscall number of compat_clock_getresVincenzo Frascino1-1/+1
The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: <[email protected]> Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Vincenzo Frascino <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-03-19Merge tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds2-2/+4
Pull cifs fixes from Steve French: "Three small smb3 fixes, two for stable" * tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: CIFS: fiemap: do not return EINVAL if get nothing CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first cifs: potential unintitliazed error code in cifs_getattr()
2020-03-19Merge tag 'kbuild-fixes-v5.6-3' of ↵Linus Torvalds12-39/+47
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment
2020-03-19rtc: max8907: add missing select REGMAP_IRQCorentin Labbe1-0/+1
I have hit the following build error: armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe': rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq' max8907 should select REGMAP_IRQ Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver") Cc: stable <[email protected]> Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-03-19scripts/kallsyms: fix wrong kallsyms_relative_baseMikhail Petrov1-4/+4
There is the code in the read_symbol function in 'scripts/kallsyms.c': if (is_ignored_symbol(name, type)) return NULL; /* Ignore most absolute/undefined (?) symbols. */ if (strcmp(name, "_text") == 0) _text = addr; But the is_ignored_symbol function returns true for name="_text" and type='A'. So the next condition is not executed and the _text variable is always zero. It makes the wrong kallsyms_relative_base symbol as a result of the code (CONFIG_KALLSYMS_BASE_RELATIVE is defined): if (base_relative) { output_label("kallsyms_relative_base"); output_address(relative_base); printf("\n"); } Because the output_address function uses the _text variable. So the kallsyms_lookup function and all related functions in the kernel do not work properly. For example, the stack trace in oops: Call Trace: [aa095e58] [809feab8] kobj_ns_ops_tbl+0x7ff09ac8/0x7ff1c1c4 (unreliable) [aa095e98] [80002b64] kobj_ns_ops_tbl+0x7f50db74/0x80000010 [aa095ef8] [809c3d24] kobj_ns_ops_tbl+0x7feced34/0x7ff1c1c4 [aa095f28] [80002ed0] kobj_ns_ops_tbl+0x7f50dee0/0x80000010 [aa095f38] [8000f238] kobj_ns_ops_tbl+0x7f51a248/0x80000010 The right stack trace: Call Trace: [aa095e58] [809feab8] module_vdu_video_init+0x2fc/0x3bc (unreliable) [aa095e98] [80002b64] do_one_initcall+0x40/0x1f0 [aa095ef8] [809c3d24] kernel_init_freeable+0x164/0x1d8 [aa095f28] [80002ed0] kernel_init+0x14/0x124 [aa095f38] [8000f238] ret_from_kernel_thread+0x14/0x1c [[email protected]: This issue happens on binutils <= 2.22 The following commit fixed it: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a The symbol type of _text is 'T' on binutils >= 2.23 The minimal supported binutils version for the kernel build is 2.21 ] Signed-off-by: Mikhail Petrov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-03-19arm64: kpti: Fix "kpti=off" when KASLR is enabledWill Deacon2-5/+5
Enabling KASLR forces the use of non-global page-table entries for kernel mappings, as this is a decision that we have to make very early on before mapping the kernel proper. When used in conjunction with the "kpti=off" command-line option, it is possible to use non-global kernel mappings but with the kpti trampoline disabled. Since commit 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of non-global mappings and does not take into account whether the kpti trampoline is enabled. This breaks context switching of the TPIDRRO_EL0 register for 64-bit tasks, where the clearing of the register is deferred to the ret-to-user code, but it also breaks the ARM SPE PMU driver which helpfully recommends passing "kpti=off" on the command line! Report whether or not KPTI is actually enabled in arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global variable directly when determining the protection flags for kernel mappings. Cc: Mark Brown <[email protected]> Reported-by: Hongbo Yao <[email protected]> Tested-by: Hongbo Yao <[email protected]> Fixes: 09e3c22a86f6 ("arm64: Use a variable to store non-global mappings decision") Signed-off-by: Will Deacon <[email protected]>
2020-03-19Merge tag 'drm-misc-fixes-2020-03-18-1' of ↵Dave Airlie4-27/+32
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - drm/lease: fix WARNING in idr_destroy - Fix AVI frame colorimetry in the dw-hdmi bridge. - Fix compiler warning in komeda by annotating functions as __maybe_unused. - Downgrade bochs pci_request_region failure from error to warning to workaround firmware fb. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-18drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle checkJames Zhu2-2/+2
fix typo for vcn2.5/jpeg2.5 idle check Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-18drm/amdgpu: fix typo for vcn2/jpeg2 idle checkJames Zhu2-2/+2
fix typo for vcn2/jpeg2 idle check Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-18drm/amdgpu: fix typo for vcn1 idle checkJames Zhu1-1/+1
fix typo for vcn1 idle check Signed-off-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-18locks: reinstate locks_delete_block optimizationLinus Torvalds2-7/+50
There is measurable performance impact in some synthetic tests due to commit 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter). Fix the race condition instead by clearing the fl_blocker pointer after the wake_up, using explicit acquire/release semantics. This does mean that we can no longer use the clearing of fl_blocker as the wait condition, so switch the waiters over to checking whether the fl_blocked_member list_head is empty. Reviewed-by: yangerkun <[email protected]> Reviewed-by: NeilBrown <[email protected]> Fixes: 6d390e4b5d48 (locks: fix a potential use-after-free problem when wakeup a waiter) Signed-off-by: Jeff Layton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-03-19modpost: Get proper section index by get_secindex() instead of st_shndxXiao Yang1-1/+2
(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets wrong section index by st_shndx if requested symbol contains extended section index that is more than 65535. In this case, we need to get proper section index by .symtab_shndx section. Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections" shows the issue. Fixes: 56067812d5b0 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Fixes: e84f9fbbece1 ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name") Signed-off-by: Xiao Yang <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-03-18mm: slub: be more careful about the double cmpxchg of freelistLinus Torvalds1-2/+4
This is just a cleanup addition to Jann's fix to properly update the transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub: add missing TID bump.."). The transaction ID is what protects us against any concurrent accesses, but we should really also make sure to make the 'freelist' comparison itself always use the same freelist value that we then used as the new next free pointer. Jann points out that if we do all of this carefully, we could skip the transaction ID update for all the paths that only remove entries from the lists, and only update the TID when adding entries (to avoid the ABA issue with cmpxchg and list handling re-adding a previously seen value). But this patch just does the "make sure to cmpxchg the same value we used" rather than then try to be clever. Acked-by: Jann Horn <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-03-18mm: slub: add missing TID bump in kmem_cache_alloc_bulk()Jann Horn1-0/+9
When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu freelist of length M, and N > M > 0, it will first remove the M elements from the percpu freelist, then call ___slab_alloc() to allocate the next element and repopulate the percpu freelist. ___slab_alloc() can re-enable IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc() to properly commit the freelist head change. Fix it by unconditionally bumping c->tid when entering the slowpath. Cc: [email protected] Fixes: ebe909e0fdb3 ("slub: improve bulk alloc strategy") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-03-18drm/lease: fix WARNING in idr_destroyQiujun Huang1-1/+2
drm_lease_create takes ownership of leases. And leases will be released by drm_master_put. drm_master_put ->drm_master_destroy ->idr_destroy So we needn't call idr_destroy again. Reported-and-tested-by: [email protected] Signed-off-by: Qiujun Huang <[email protected]> Cc: [email protected] Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-18tty: fix compat TIOCGSERIAL checking wrong function ptrEric Biggers1-1/+1
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start checking for the presence of the ->set_serial function pointer rather than ->get_serial. This appears to be a copy-and-paste error, since ->get_serial is the function pointer that is called as well as the pointer that is checked by the non-compat version of TIOCGSERIAL. Fix this by checking the correct function pointer. Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <[email protected]> # v4.20+ Signed-off-by: Eric Biggers <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: fix compat TIOCGSERIAL leaking uninitialized memoryEric Biggers1-1/+3
Commit 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start copying a whole 'serial_struct32' to userspace rather than individual fields, but failed to initialize all padding and fields -- namely the hole after the 'iomem_reg_shift' field, and the 'reserved' field. Fix this by initializing the struct to zero. [v2: use sizeof, and convert the adjacent line for consistency.] Reported-by: [email protected] Fixes: 77654350306a ("take compat TIOC[SG]SERIAL treatment into tty_compat_ioctl()") Cc: <[email protected]> # v4.20+ Signed-off-by: Eric Biggers <[email protected]> Acked-by: Jiri Slaby <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: drop outdated comments about release_tty() lockingEric Biggers1-6/+2
The current version of the TTY code unlocks the tty_struct(s) before release_tty() rather than after. Moreover, tty_unlock_pair() no longer exists. Thus, remove the outdated comments regarding tty_unlock_pair(). Signed-off-by: Eric Biggers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: n_tracesink: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to Kernel driver API to route trace data. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Link: https://lore.kernel.org/r/20200302143642.GA3335@nishad Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: hvc: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header file related to the HVC driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Nishad Kamdar <[email protected]> Link: https://lore.kernel.org/r/20200301170419.GA7125@nishad Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: nozomi: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-34/+33
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Also rewrite the code in a standard if-form instead of ugly conditional operators. Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: serial: pch_uart: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-11/+11
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18tty: nozomi: fix spelling mistake "reserverd" -> "reserved"Alexandre Belloni1-1/+1
The reserved bits should be named reserved. Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18serial: sprd: remove redundant sprd_port cleanupChunyan Zhang1-3/+1
We don't need to cleanup sprd_port anymore, since we've dropped the way of using the sprd_port[] array to get port index. Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18serial: sprd: getting port index via serial aliases onlyChunyan Zhang1-31/+5
This patch simplifies the process of getting serial port number, with this patch, serial devices must have aliases configured in devicetree. The serial port searched out via sprd_port array maybe wrong if we don't have serial alias defined in devicetree, and specify console with command line, we would get the wrong port number if other serial ports probe failed before console's. So using aliases is mandatory. Reviewed-by: Baolin Wang <[email protected]> Signed-off-by: Chunyan Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18mmc: rtsx_pci: Fix support for speed-modes that relies on tuningRicky Wu5-8/+13
The TX/RX register should not be treated the same way to allow for better support of tuning. Fix this by using a default initial value for TX. Signed-off-by: Ricky Wu <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] [Ulf: Updated changelog] Signed-off-by: Ulf Hansson <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]>
2020-03-18intel_th: pci: Add Elkhart Lake CPU supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Elkhart Lake CPU. Signed-off-by: Alexander Shishkin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18intel_th: Fix user-visible error codesAlexander Shishkin1-3/+3
There are a few places in the driver that end up returning ENOTSUPP to the user, replace those with EINVAL. Signed-off-by: Alexander Shishkin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver") Cc: [email protected] # v4.4+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18intel_th: msu: Fix the unexpected state warningAlexander Shishkin1-3/+4
The unexpected state warning should only warn on illegal state transitions. Fix that. Signed-off-by: Alexander Shishkin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Fixes: 615c164da0eb4 ("intel_th: msu: Introduce buffer interface") Cc: [email protected] # v5.4+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18stm class: sys-t: Fix the use of time_after()Alexander Shishkin1-3/+3
The operands of time_after() are in a wrong order in both instances in the sys-t driver. Fix that. Signed-off-by: Alexander Shishkin <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Fixes: 39f10239df75 ("stm class: p_sys-t: Add support for CLOCKSYNC packets") Fixes: d69d5e83110f ("stm class: Add MIPI SyS-T protocol support") Cc: [email protected] # v4.20+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18Merge tag 'iio-fixes-for-5.6a' of ↵Greg Kroah-Hartman9-45/+48
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes in the 5.6 cycle. * adxl372 - Fix marking of buffered values as big endian. * ak8974 - Fix wrong handling of negative values when read from sysfs. * at91-sama5d2 - Fix differential mode by ensuring configuration set correctly. * ping - Use the write sensor type for of_ping_match table. * sps30 - Kconfig build dependency fix. * st-sensors - Fix a wrong identification of which part the SMO8840 ACPI ID indicates. * stm32-dsfdm - Fix a sleep in atomic issue by not using a trigger when it makes no sense. * stm32-timer - Make sure master mode is disabled when stopping. * vcnl400 - Update some sampling periods based on new docs. * tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: ping: set pa_laser_ping_cfg in of_ping_match iio: chemical: sps30: fix missing triggered buffer dependency iio: st_sensors: remap SMO8840 to LIS2DH12 iio: light: vcnl4000: update sampling periods for vcnl4040 iio: light: vcnl4000: update sampling periods for vcnl4200 iio: accel: adxl372: Set iio_chan BE iio: magnetometer: ak8974: Fix negative raw values in sysfs iio: trigger: stm32-timer: disable master mode when stopping iio: adc: stm32-dfsdm: fix sleep in atomic context iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
2020-03-18tty: serial: Add CONSOLE_POLL support to SiFive UARTVincent Chen1-0/+27
Add CONSOLE_POLL support for future KGDB porting. Signed-off-by: Vincent Chen <[email protected]> Changes since v1: 1. Fix the compile error reported by kbuild test robot Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-18Merge tag 'usb-serial-5.6-rc7' of ↵Greg Kroah-Hartman3-0/+4
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.6-rc7 Here are a couple of new device ids for 5.6-rc. All have been in linux-next with no reported issues. * tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: pl2303: add device-id for HP LD381 USB: serial: option: add ME910G1 ECM composition 0x110b
2020-03-17arm64: smp: fix crash_smp_send_stop() behaviourCristian Marussi1-2/+6
On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-03-17arm64: smp: fix smp_send_stop() behaviourCristian Marussi1-3/+14
On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin <[email protected]> Acked-by: Mark Rutland <[email protected]> Signed-off-by: Cristian Marussi <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2020-03-17USB: cdc-acm: fix rounding error in TIOCSSERIALAnthony Mallet1-9/+16
By default, tty_port_init() initializes those parameters to a multiple of HZ. For instance in line 69 of tty_port.c: port->close_delay = (50 * HZ) / 100; https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69 With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04 linux-image-4.15.0-37-generic), the default setting for close_delay is thus 125. When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then executed with the same setting '12', the value is interpreted as '120' which is different from the current setting and a EPERM error may be raised by set_serial_info() if !CAP_SYS_ADMIN. https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919 Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)") Signed-off-by: Anthony Mallet <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIALAnthony Mallet1-4/+5
close_delay and closing_wait are specified in hundredth of a second but stored internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies() functions to convert from each other. Signed-off-by: Anthony Mallet <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adaptersHans de Goede1-0/+3
We have been receiving bug reports that ethernet connections over RTL8153 based ethernet adapters stops working after a while with errors like these showing up in dmesg when the ethernet stops working: [12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout [12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout [12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1 docks and with generic USB to ethernet dongles using the RTL8153 chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to the kernel commandline and all users who have tried this report that this fixes this. Also note that we already have an existing NO_LPM quirk for the RTL8153 used in the Microsoft Surface Dock (where it uses a different usb-id). This commit adds a NO_LPM quirk for the generic Realtek RTL8153 0bda:8153 usb-id, fixing the Tx timeout errors on these devices. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931 Cc: [email protected] Cc: [email protected] Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17usb: chipidea: udc: fix sleeping function called from invalid contextPeter Chen1-3/+4
The code calls pm_runtime_get_sync with irq disabled, it causes below warning: BUG: sleeping function called from invalid context at wer/runtime.c:1075 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: er/u8:1 CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted 20200304-00181-gbebfd2a5be98 #1588 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: ci_otg ci_otg_work [<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14) [<c010a315>] (show_stack) from [<c0987d29>] 5/0x94) [<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118) [<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78) [<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74) [<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc) [<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104) [<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48) [<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c) [<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128) [<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404) [<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc) [<c0134acb>] (worker_thread) from [<c0139433>] x118) [<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34) Tested-by: Dmitry Osipenko <[email protected]> Cc: <[email protected]> #v5.5 Fixes: 72dc8df7920f ("usb: chipidea: udc: protect usb interrupt enable") Reported-by: Dmitry Osipenko <[email protected]> Signed-off-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17CIFS: fiemap: do not return EINVAL if get nothingMurphy Zhou1-1/+1
If we call fiemap on a truncated file with none blocks allocated, it makes sense we get nothing from this call. No output means no blocks have been counted, but the call succeeded. It's a valid response. Simple example reproducer: xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument Signed-off-by: Murphy Zhou <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> CC: Stable <[email protected]>
2020-03-17CIFS: Increment num_remote_opens stats counter even in case of ↵Shyam Prasad N1-0/+2
smb2_query_dir_first The num_remote_opens counter keeps track of the number of open files which must be maintained by the server at any point. This is a per-tree-connect counter, and the value of this counter gets displayed in the /proc/fs/cifs/Stats output as a following... Open files: 0 total (local), 1 open on server ^^^^^^^^^^^^^^^^ As a thumb-rule, we want to increment this counter for each open/create that we successfully execute on the server. Similarly, we should decrement the counter when we successfully execute a close. In this case, an increment was being missed in case of smb2_query_dir_first, in case of successful open. As a result, we would underflow the counter and we could even see the counter go to negative after sufficient smb2_query_dir_first calls. I tested the stats counter for a bunch of filesystem operations with the fix. And it looks like the counter looks correct to me. I also check if we missed the increments and decrements elsewhere. It does not seem so. Few other cases where an open is done and we don't increment the counter are the compound calls where the corresponding close is also sent in the request. Signed-off-by: Shyam Prasad N <[email protected]> CC: Stable <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2020-03-17cifs: potential unintitliazed error code in cifs_getattr()Dan Carpenter1-1/+1
Smatch complains that "rc" could be uninitialized. fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'. Changing it to "return 0;" improves readability as well. Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Steve French <[email protected]> Acked-by: Ronnie Sahlberg <[email protected]>
2020-03-17ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662Jian-Hong Pan1-0/+12
A headset on the desktop like Acer N50-600 does not work, until quirk ALC662_FIXUP_ACER_NITRO_HEADSET_MODE is applied. Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-17ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662Jian-Hong Pan1-0/+11
The Acer desktop X2660G with ALC662 can't detect the headset microphone until ALC662_FIXUP_ACER_X2660G_HEADSET_MODE quirk applied. Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-17Merge branch 'for-linus' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - string buffer formatting fixes in picolcd and sensor drivers, from Takashi Iwai - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: add ALWAYS_POLL quirk to lenovo pixart mouse HID: google: add moonball USB id HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
2020-03-17serial: 8250_port: Disable DMA operations for kernel consoleAndy Shevchenko1-3/+8
It would be too tricky and error prone to allow DMA operations on kernel console. One of the concern is when DMA is a separate device, for example on Intel CherryTrail platforms, and might need special work around to be functional, see the commit eebb3e8d8aaf ("ACPI / LPSS: override power state for LPSS DMA device") for more information. Another one is that kernel console is used in atomic context, e.g. when printing crucial information to the user (Oops or crash), and DMA may not serve due to power management complications including non-atomic ACPI calls but not limited to it (see above). Besides that, other concerns are described in the commit 84b40e3b57ee ("serial: 8250: omap: Disable DMA for console UART") done for OMAP UART and may be repeated here. Disable any kind of DMA operations on kernel console due to above concerns. Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: 8250_port: Don't use power management for kernel consoleAndy Shevchenko3-4/+30
Doing any kind of power management for kernel console is really bad idea. First of all, it runs in poll and atomic mode. This fact attaches a limitation on the functions that might be called. For example, pm_runtime_get_sync() might sleep and thus can't be used. This call needs, for example, to bring the device to powered on state on the system, where the power on sequence may require on-atomic operations, such as Intel Cherrytrail with ACPI enumerated UARTs. That said, on ACPI enabled platforms it might even call firmware for a job. On the other hand pm_runtime_get() doesn't guarantee that device will become powered on fast enough. Besides that, imagine the case when console is about to print a kernel Oops and it's powered off. In such an emergency case calling the complex functions is not the best what we can do, taking into consideration that user wants to see at least something of the last kernel word before it passes away. Here we modify the 8250 console code to prevent runtime power management. Note, there is a behaviour change for OMAP boards. It will require to detach kernel console to become idle. Link: https://lists.openwall.net/linux-kernel/2018/09/29/65 Suggested-by: Russell King <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17serial: core: Allow detach and attach serial device for consoleAndy Shevchenko2-4/+63
In the future we would like to disable power management on the serial devices used as kernel consoles to avoid weird behaviour in some cases. However, disabling PM may prevent system to go to deep sleep states, which in its turn leads to the higher power consumption. Tony Lindgren proposed a work around, i.e. allow user to detach such consoles to make PM working again. In case user wants to see what's going on, it also provides a mechanism to attach console back. Link: https://lists.openwall.net/linux-kernel/2018/09/29/65 Suggested-by: Tony Lindgren <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-17Merge branch 'for-5.7-console-exit' of ↵Greg Kroah-Hartman3-24/+30
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk into tty-next We need the console patches in here as well for futher work from Andy. * 'for-5.7-console-exit' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: console: Introduce ->exit() callback console: Don't notify user space when unregister non-listed console console: Avoid positive return code from unregister_console() console: Drop misleading comment console: Use for_each_console() helper in unregister_console() console: Drop double check for console_drivers being non-NULL console: Don't perform test for CON_BRL flag Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.