aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-23arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>Masahiro Yamada24-225/+287
As the bug report [1] pointed out, <linux/vermagic.h> must be included after <linux/module.h>. I believe we should not impose any include order restriction. We often sort include directives alphabetically, but it is just coding style convention. Technically, we can include header files in any order by making every header self-contained. Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in <asm/module.h>, which is not included from <linux/vermagic.h>. Hence, the straight-forward fix-up would be as follows: |--- a/include/linux/vermagic.h |+++ b/include/linux/vermagic.h |@@ -1,5 +1,6 @@ | /* SPDX-License-Identifier: GPL-2.0 */ | #include <generated/utsrelease.h> |+#include <linux/module.h> | | /* Simply sanity version stamp for modules. */ | #ifdef CONFIG_SMP This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC definitions into <asm/vermagic.h>. With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal, and the location of MODULE_ARCH_VERMAGIC definitions will be consistent. For arc and ia64, MODULE_PROC_FAMILY is only used for defining MODULE_ARCH_VERMAGIC. I squashed it. For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely because they contained nothing but MODULE_ARCH_VERMAGIC definition. Kbuild will automatically generate <asm/modules.h> at build-time, wrapping <asm-generic/module.h>. [1] https://lore.kernel.org/lkml/[email protected] Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Acked-by: Jessica Yu <[email protected]>
2020-04-23kbuild: fix DT binding schema rule again to avoid needless rebuildsMasahiro Yamada1-1/+1
Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes"), this rule is every time re-run even if you change nothing. cmd_dtc takes one additional parameter to pass to the -O option of dtc. We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked from if_changed_rule is false positive. Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes") Signed-off-by: Masahiro Yamada <[email protected]>
2020-04-22cifs: fix uninitialised lease_key in open_shroot()Paulo Alcantara1-0/+5
SMB2_open_init() expects a pre-initialised lease_key when opening a file with a lease, so set pfid->lease_key prior to calling it in open_shroot(). This issue was observed when performing some DFS failover tests and the lease key was never randomly generated. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> CC: Stable <[email protected]>
2020-04-22cifs: ensure correct super block for DFS reconnectPaulo Alcantara1-17/+65
This patch is basically fixing the lookup of tcons (DFS specific) during reconnect (smb2pdu.c:__smb2_reconnect) to update their prefix paths. Previously, we relied on the TCP_Server_Info pointer (misc.c:tcp_super_cb) to determine which tcon to update the prefix path We could not rely on TCP server pointer to determine which super block to update the prefix path when reconnecting tcons since it might map to different tcons that share same TCP connection. Instead, walk through all cifs super blocks and compare their DFS full paths with the tcon being updated to. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2020-04-22tracing: Fix memory leaks in trace_events_hist.cVamshi K Sthambamkadi1-0/+7
kmemleak report 1: [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270 [<05a2c9ed>] create_field_var+0xcf/0x180 [<528a2d68>] action_create+0xe2/0xc80 [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920 [<28ea5d3d>] trigger_process_regex+0x7b/0xc0 [<3138e86f>] event_trigger_write+0x4d/0xb0 [<ffd66c19>] __vfs_write+0x30/0x200 [<4f424a0d>] vfs_write+0x96/0x1b0 [<da59a290>] ksys_write+0x53/0xc0 [<3717101a>] __ia32_sys_write+0x15/0x20 [<c5f23497>] do_fast_syscall_32+0x70/0x250 [<46e2629c>] entry_SYSENTER_32+0xaf/0x102 This is because save_vars[] of struct hist_trigger_data are not destroyed kmemleak report 2: [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270 [<6e5e97c5>] create_var+0x3c/0x110 [<de82f1b9>] create_field_var+0xaf/0x180 [<528a2d68>] action_create+0xe2/0xc80 [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920 [<28ea5d3d>] trigger_process_regex+0x7b/0xc0 [<3138e86f>] event_trigger_write+0x4d/0xb0 [<ffd66c19>] __vfs_write+0x30/0x200 [<4f424a0d>] vfs_write+0x96/0x1b0 [<da59a290>] ksys_write+0x53/0xc0 [<3717101a>] __ia32_sys_write+0x15/0x20 [<c5f23497>] do_fast_syscall_32+0x70/0x250 [<46e2629c>] entry_SYSENTER_32+0xaf/0x102 struct hist_field allocated through create_var() do not initialize "ref" field to 1. The code in __destroy_hist_field() does not destroy object if "ref" is initialized to zero, the condition if (--hist_field->ref > 1) always passes since unsigned int wraps. kmemleak report 3: [<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0 [<bb7f80a5>] kstrdup+0x27/0x50 [<39d70006>] init_var_ref+0x58/0xd0 [<8ca76370>] create_var_ref+0x89/0xe0 [<f045fc39>] action_create+0x38f/0xc80 [<7c146821>] event_hist_trigger_func+0x15b5/0x1920 [<07de3f61>] trigger_process_regex+0x7b/0xc0 [<e87daf8f>] event_trigger_write+0x4d/0xb0 [<19bf1512>] __vfs_write+0x30/0x200 [<64ce4d27>] vfs_write+0x96/0x1b0 [<a6f34170>] ksys_write+0x53/0xc0 [<7d4230cd>] __ia32_sys_write+0x15/0x20 [<8eadca00>] do_fast_syscall_32+0x70/0x250 [<235cf985>] entry_SYSENTER_32+0xaf/0x102 hist_fields (system & event_name) are not freed Link: http://lkml.kernel.org/r/20200422061503.GA5151@cosmos Signed-off-by: Vamshi K Sthambamkadi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-04-22cifs: do not share tcons with DFSPaulo Alcantara1-0/+4
This disables tcon re-use for DFS shares. tcon->dfs_path stores the path that the tcon should connect to when doing failing over. If that tcon is used multiple times e.g. 2 mounts using it with different prefixpath, each will need a different dfs_path but there is only one tcon. The other solution would be to split the tcon in 2 tcons during failover but that is much harder. tcons could not be shared with DFS in cifs.ko because in a DFS namespace like: //domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot //serverA/dfsroot/link -> /serverA/target1/aa/bb //serverA/dfsroot/link2 -> /serverA/target1/cc/dd you can see that link and link2 are two DFS links that both resolve to the same target share (/serverA/target1), so cifs.ko will only contain a single tcon for both link and link2. The problem with that is, if we (auto)mount "link" and "link2", cifs.ko will only contain a single tcon for both DFS links so we couldn't perform failover or refresh the DFS cache for both links because tcon->dfs_path was set to either "link" or "link2", but not both -- which is wrong. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2020-04-22objtool: Fix off-by-one in symbol_by_offset()Julien Thierry1-1/+1
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will associate the first instruction of a symbol with the symbol preceding it. This is because symbol->offset + symbol->len is already outside of the symbol's range. Fixes: 2a362ecc3ec9 ("objtool: Optimize find_symbol_*() and read_symbols()") Signed-off-by: Julien Thierry <[email protected]> Reviewed-by: Miroslav Benes <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]>
2020-04-22perf/core: fix parent pid/tid in task exit eventsIan Rogers1-3/+10
Current logic yields the child task as the parent. Before: $ perf record bash -c "perf list > /dev/null" $ perf script -D |grep 'FORK\|EXIT' 4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470) 4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472) 4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470) ^ Note the repeated values here -------------------/ After: 383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266) 383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266) 383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265) Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()") Reported-by: KP Singh <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22sched/core: Fix reset-on-fork from RT with uclampQuentin Perret1-7/+2
uclamp_fork() resets the uclamp values to their default when the reset-on-fork flag is set. It also checks whether the task has a RT policy, and sets its uclamp.min to 1024 accordingly. However, during reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after, hence leading to an erroneous uclamp.min setting for the new task if it was forked from RT. Fix this by removing the unnecessary check on rt_task() in uclamp_fork() as this doesn't make sense if the reset-on-fork flag is set. Fixes: 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks") Reported-by: Chitti Babu Theegala <[email protected]> Signed-off-by: Quentin Perret <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Patrick Bellasi <[email protected]> Reviewed-by: Dietmar Eggemann <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22x86, sched: Move check for CPU type to caller functionGiovanni Gherdovich1-4/+2
Improve readability of the function intel_set_max_freq_ratio() by moving the check for KNL CPUs there, together with checks for GLM and SKX. Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22x86, sched: Don't enable static key when starting secondary CPUsPeter Zijlstra (Intel)1-7/+14
The static key arch_scale_freq_key only needs to be enabled once (at boot). This change fixes a bug by which the key was enabled every time cpu0 is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are started from the idle thread: setting a static key from there means acquiring a lock and may result in sleeping in the idle task, causing CPU lockup. Another consequence of this change is that init_counter_refs() is now called on each CPU correctly; previously the function on_each_cpu() was used, but it was called at boot when the only online cpu is cpu0. [[email protected]: Tested and wrote changelog] Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Reported-by: Chris Wilson <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22x86, sched: Account for CPUs with less than 4 cores in freq. invarianceGiovanni Gherdovich1-3/+8
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will rightfully report that the 4C turbo ratio is zero. In such cases, use the 1C turbo ratio instead for frequency invariance calculations. Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Reported-by: Like Xu <[email protected]> Reported-by: Neil Rickert <[email protected]> Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Tested-by: Dave Kleikamp <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22x86, sched: Bail out of frequency invariance if base frequency is unknownGiovanni Gherdovich1-0/+9
Some hypervisors such as VMWare ESXi 5.5 advertise support for X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular, MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base clock frequency of the CPU (highest non-turbo frequency), producing a division by zero when computing the ratio turbo_freq/base_freq necessary for frequency invariant accounting. It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance couldn't be done in principle (not that it would make a lot of sense in a VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise that feature. Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance") Signed-off-by: Giovanni Gherdovich <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-04-22objtool: Fix 32bit cross buildsPeter Zijlstra1-1/+1
Apparently there's people doing 64bit builds on 32bit machines. Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()") Reported-by: [email protected] Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
2020-04-22selftests: Fix suppress test in fib_tests.shDavid Ahern1-2/+8
fib_tests is spewing errors: ... Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ping: connect: Network is unreachable Cannot open network namespace "ns1": No such file or directory Cannot open network namespace "ns1": No such file or directory ... Each test entry in fib_tests is supposed to do its own setup and cleanup. Right now the $IP commands in fib_suppress_test are failing because there is no ns1. Add the setup/cleanup and logging expected for each test. Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule") Signed-off-by: David Ahern <[email protected]> Cc: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22Merge branch 'net-dsa-b53-Various-ARL-fixes'David S. Miller2-7/+39
Florian Fainelli says: ==================== net: dsa: b53: Various ARL fixes This patch series fixes a number of short comings in the existing b53 driver ARL management logic in particular: - we were not looking up the {MAC,VID} tuples against their VID, despite having VLANs enabled - the MDB entries (multicast) would lose their validity as soon as a single port in the vector would leave the entry - the ARL was currently under utilized because we would always place new entries in bin index #1, instead of using all possible bins available, thus reducing the ARL effective size by 50% or 75% depending on the switch generation - it was possible to overwrite the ARL entries because no proper space verification was done This patch series addresses all of these issues. Changes in v2: - added a new patch to correctly flip invidual VLAN learning vs. shared VLAN learning depending on the global VLAN state - added Andrew's R-b tags for patches which did not change - corrected some verbosity and minor issues in patch #4 to match caller expectations, also avoid a variable length DECLARE_BITMAP() call ==================== Signed-off-by: David S. Miller <[email protected]>
2020-04-22net: dsa: b53: b53_arl_rw_op() needs to select IVL or SVLFlorian Fainelli2-0/+5
Flip the IVL_SVL_SELECT bit correctly based on the VLAN enable status, the default is to perform Shared VLAN learning instead of Individual learning. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22net: dsa: b53: Rework ARL bin logicFlorian Fainelli2-4/+29
When asking the ARL to read a MAC address, we will get a number of bins returned in a single read. Out of those bins, there can essentially be 3 states: - all bins are full, we have no space left, and we can either replace an existing address or return that full condition - the MAC address was found, then we need to return its bin index and modify that one, and only that one - the MAC address was not found and we have a least one bin free, we use that bin index location then The code would unfortunately fail on all counts. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22net: dsa: b53: Fix ARL register definitionsFlorian Fainelli1-2/+2
The ARL {MAC,VID} tuple and the forward entry were off by 0x10 bytes, which means that when we read/wrote from/to ARL bin index 0, we were actually accessing the ARLA_RWCTRL register. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22net: dsa: b53: Fix valid setting for MDB entriesFlorian Fainelli1-1/+0
When support for the MDB entries was added, the valid bit was correctly changed to be assigned depending on the remaining port bitmask, that is, if there were no more ports added to the entry's port bitmask, the entry now becomes invalid. There was another assignment a few lines below that would override this which would invalidate entries even when there were still multiple ports left in the MDB entry. Fixes: 5d65b64a3d97 ("net: dsa: b53: Add support for MDB") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22net: dsa: b53: Lookup VID in ARL searches when VLAN is enabledFlorian Fainelli1-0/+3
When VLAN is enabled, and an ARL search is issued, we also need to compare the full {MAC,VID} tuple before returning a successful search result. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22perf/x86/cstate: Add Jasper Lake CPU supportHarry Pan1-0/+1
The Jasper Lake processor is Tremont microarchitecture, reuse the glm_cstates table of Goldmont and Goldmont Plus to enable the C-states residency profiling. Signed-off-by: Harry Pan <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/20200402190658.1.Ic02e891daac41303aed1f2fc6c64f6110edd27bd@changeid
2020-04-22Merge branch 'vrf-looping'David S. Miller3-6/+4
David Ahern says: ==================== net: Fix looping with vrf, xfrms and qdisc on VRF Trev reported that use of VRFs with xfrms is looping when a qdisc is added to the VRF device. The combination of xfrm + qdisc is not handled by the VRF driver which lost track that it has already seen the packet. The XFRM_TRANSFORMED flag is used by the netfilter code for a similar purpose, so re-use for VRF. Patch 1 drops the #ifdef around setting the flag in the xfrm output functions. Patch 2 adds a check to the VRF driver for flag; if set the packet has already passed through the VRF driver once and does not need to recirculated a second time. This is a day 1 bug with VRFs; stable wise, I would only take this back to 4.14. I have a set of test cases which I will submit to net-next. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-04-22vrf: Check skb for XFRM_TRANSFORMED flagDavid Ahern1-2/+4
To avoid a loop with qdiscs and xfrms, check if the skb has already gone through the qdisc attached to the VRF device and then to the xfrm layer. If so, no need for a second redirect. Fixes: 193125dbd8eb ("net: Introduce VRF device driver") Reported-by: Trev Larock <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22xfrm: Always set XFRM_TRANSFORMED in xfrm{4,6}_output_finishDavid Ahern2-4/+0
IPSKB_XFRM_TRANSFORMED and IP6SKB_XFRM_TRANSFORMED are skb flags set by xfrm code to tell other skb handlers that the packet has been passed through the xfrm output functions. Simplify the code and just always set them rather than conditionally based on netfilter enabled thus making the flag available for other users. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-22ipv6: ndisc: RFC-ietf-6man-ra-pref64-09 is now published as RFC8781Maciej Żenczykowski1-1/+1
See: https://www.rfc-editor.org/authors/rfc8781.txt Cc: Erik Kline <[email protected]> Cc: Jen Linkova <[email protected]> Cc: Lorenzo Colitti <[email protected]> Cc: Michael Haro <[email protected]> Signed-off-by: Maciej Żenczykowski <[email protected]> Fixes: c24a77edc9a7 ("ipv6: ndisc: add support for 'PREF64' dns64 prefix identifier") Signed-off-by: David S. Miller <[email protected]>
2020-04-22dt-bindings: Re-enable core schemas for dtbs_checkRob Herring1-1/+2
In commit 2ba06cd8565b ("kbuild: Always validate DT binding examples"), the core schemas (from dtschema repo) were inadvertently disabled for dtbs_checks. Re-enable them. Fixes: 2ba06cd8565b ("kbuild: Always validate DT binding examples") Reviewed-by: Masahiro Yamada <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-04-22net: phy: microchip_t1: add lan87xx_phy_init to initialize the lan87xx phy.Yuiko Oshino1-0/+171
lan87xx_phy_init() initializes the lan87xx phy hardware including its TC10 Wake-up and Sleep features. Fixes: 3e50d2da5850 ("Add driver for Microchip LAN87XX T1 PHYs") Signed-off-by: Yuiko Oshino <[email protected]> v0->v1: - Add more details in the commit message and source comments. - Update to the latest initialization sequences. - Add access_ereg_modify_changed(). - Fix access_ereg() to access SMI bank correctly. Signed-off-by: David S. Miller <[email protected]>
2020-04-22Merge tag 'linux-kselftest-5.7-rc3' of ↵Linus Torvalds10-34/+22
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of fixes to runner scripts and individual test run-time bugs. Includes fixes to tpm2 and memfd test run-time regressions" * tag 'linux-kselftest-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ipc: Fix test failure seen after initial test run Revert "Kernel selftests: tpm2: check for tpm support" selftests/ftrace: Add CONFIG_SAMPLE_FTRACE_DIRECT=m kconfig selftests/seccomp: allow clock_nanosleep instead of nanosleep kselftest/runner: allow to properly deliver signals to tests selftests/harness: fix spelling mistake "SIGARLM" -> "SIGALRM" selftests: Fix memfd test run-time regression selftests: vm: Fix 64-bit test builds for powerpc64le selftests: vm: Do not override definition of ARCH
2020-04-22usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an ↵Naoki Kiryu1-1/+4
invalid pointer Before this commit, typec_altmode_get_partner would return a const struct typec_altmode * pointing to address 0x08 when to_altmode(adev)->partner was NULL. Add a check for to_altmode(adev)->partner being NULL to fix this. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1785972 Fixes: 5f54a85db5df ("usb: typec: Make sure an alt mode exist before getting its partner") Cc: [email protected] Signed-off-by: Naoki Kiryu <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-23scripts/config: allow colons in option strings for sedJeremie Francois (on alpha)1-1/+4
Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by: Jeremie Francois (on alpha) <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-04-22MAINTAINERS: Add Rob Herring and remove Andy Murray as PCI reviewersLorenzo Pieralisi1-1/+1
Andy Murray decided to step down as PCI controller reviewer and Rob Herring is willing to help review PCI controller patches. Update the respective MAINTAINERS entries to reflect this change. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Rob Herring <[email protected]> Cc: Andrew Murray <[email protected]>
2020-04-22PM: sleep: core: Switch back to async_schedule_dev()Kai-Heng Feng1-1/+1
Commit 8b9ec6b73277 ("PM core: Use new async_schedule_dev command") introduced a new function for better performance. However commit f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") went back to the non-optimized version, async_schedule(). So switch back to the sync_schedule_dev() to improve performance Fixes: f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-22s390/pci: do not set affinity for floating irqsNiklas Schnelle1-2/+3
with the introduction of CPU directed interrupts the kernel parameter pci=force_floating was introduced to fall back to the previous behavior using floating irqs. However we were still setting the affinity in that case, both in __irq_alloc_descs() and via the irq_set_affinity callback in struct irq_chip. For the former only set the affinity in the directed case. The latter is explicitly set in zpci_directed_irq_init() so we can just leave it unset for the floating case. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <[email protected]> Signed-off-by: Alexander Schmidt <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-22s390/ftrace: fix potential crashes when switching tracersPhilipp Rudo3-4/+4
Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-04-22ALSA: usb-audio: Add connector notifier delegationTakashi Iwai3-0/+48
It turned out that ALC1220-VB USB-audio device gives the interrupt event to some PCM terminals while those don't allow the connector state request but only the actual I/O terminals return the request. The recent commit 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") excluded those phantom terminals, so those events are ignored, too. My first thought was that this could be easily deduced from the associated terminals, but some of them have even no associate terminal ID, hence it's not too trivial to figure out. Since the number of such terminals are small and limited, this patch implements another quirk table for the simple mapping of the connectors. It's not really scalable, but let's hope that there will be not many such funky devices in future. Fixes: 7dc3c5a0172e ("ALSA: usb-audio: Don't create jack controls for PCM terminals") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-22exfat: truncate atimes to 2s granularityEric Sandeen5-1/+24
The timestamp for access_time has double seconds granularity(There is no 10msIncrement field for access_time unlike create/modify_time). exfat's atimes are restricted to only 2s granularity so after we set an atime, round it down to the nearest 2s and set the sub-second component of the timestamp to 0. Signed-off-by: Eric Sandeen <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22exfat: properly set s_time_granEric Sandeen1-1/+1
The s_time_gran superblock field indicates the on-disk nanosecond granularity of timestamps, and for exfat that seems to be 10ms, so set s_time_gran to 10000000ns. Without this, in-memory timestamps change when they get re-read from disk. Signed-off-by: Eric Sandeen <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22exfat: remove 'bps' mount-optionTetsuhiro Kohada1-1/+0
remount fails because exfat_show_options() returns unsupported option 'bps'. > # mount -o ro,remount > exfat: Unknown parameter 'bps' To fix the problem, just remove 'bps' option from exfat_show_options(). Signed-off-by: Tetsuhiro Kohada <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22exfat: Unify access to the boot sectorTetsuhiro Kohada2-30/+16
Unify access to boot sector via 'sbi->pbr_bh'. This fixes vol_flags inconsistency at read failed in fs_set_vol_flags(), and buffer_head leak in __exfat_fill_super(). Signed-off-by: Tetsuhiro Kohada <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22exfat: add missing MODULE_ALIAS_FS()Thomas Backlund1-0/+1
This adds the necessary MODULE_ALIAS_FS() to exfat so the module gets automatically loaded when an exfat filesystem is mounted. Signed-off-by: Thomas Backlund <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22exfat: Fix discard supportPali Rohár1-2/+3
Discard support was always unconditionally disabled. Now it is disabled only in the case when blk_queue_discard() returns false. Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Namjae Jeon <[email protected]>
2020-04-22powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32Christophe Leroy2-2/+2
CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32 which doesn't exists. Fixing it leads to a deadlock due to a vital register getting clobbered in _switch(). Change dependency to PPC32 and use r0 instead of r4 in _switch() Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection") Cc: [email protected] # v5.2+ Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
2020-04-22powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failureChristophe Leroy1-0/+3
WRITE_RO lkdtm test works. But when selecting CONFIG_DEBUG_RODATA_TEST, the kernel reports rodata_test: test data was not read only This is because when rodata test runs, there are still old entries in TLB. Flush TLB after setting kernel pages RO or NX. Fixes: d5f17ee96447 ("powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX") Cc: [email protected] # v5.1+ Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/485caac75f195f18c11eb077b0031fdd2bb7fb9e.1587361039.git.christophe.leroy@c-s.fr
2020-04-22pnp: Use list_for_each_entry() instead of open codingJason Gunthorpe1-20/+9
Aside from good practice, this avoids a warning from gcc 10: ./include/linux/kernel.h:997:3: warning: array subscript -31 is outside array bounds of ‘struct list_head[1]’ [-Warray-bounds] 997 | ((type *)(__mptr - offsetof(type, member))); }) | ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/list.h:493:2: note: in expansion of macro ‘container_of’ 493 | container_of(ptr, type, member) | ^~~~~~~~~~~~ ./include/linux/pnp.h:275:30: note: in expansion of macro ‘list_entry’ 275 | #define global_to_pnp_dev(n) list_entry(n, struct pnp_dev, global_list) | ^~~~~~~~~~ ./include/linux/pnp.h:281:11: note: in expansion of macro ‘global_to_pnp_dev’ 281 | (dev) != global_to_pnp_dev(&pnp_global); \ | ^~~~~~~~~~~~~~~~~ arch/x86/kernel/rtc.c:189:2: note: in expansion of macro ‘pnp_for_each_dev’ 189 | pnp_for_each_dev(dev) { Because the common code doesn't cast the starting list_head to the containing struct. Signed-off-by: Jason Gunthorpe <[email protected]> [ rjw: Whitespace adjustments ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-21cifs: minor update to comments around the cifs_tcp_ses_lock mutexSteve French1-1/+2
Update comment to note that it protects server->dstaddr Signed-off-by: Steve French <[email protected]>
2020-04-21net: stmmac: Enable SERDES power up/down sequenceVoon Weifeng4-0/+237
This patch is to enable Intel SERDES power up/down sequence. The SERDES converts 8/10 bits data to SGMII signal. Below is an example of HW configuration for SGMII mode. The SERDES is located in the PHY IF in the diagram below. <-----------------GBE Controller---------->|<--External PHY chip--> +----------+ +----+ +---+ +----------+ | EQoS | <-GMII->| DW | < ------ > |PHY| <-SGMII-> | External | | MAC | |xPCS| |IF | | PHY | +----------+ +----+ +---+ +----------+ ^ ^ ^ ^ | | | | +---------------------MDIO-------------------------+ PHY IF configuration and status registers are accessible through mdio address 0x15 which is defined as mdio_adhoc_addr. During D0, The driver will need to power up PHY IF by changing the power state to P0. Likewise, for D3, the driver sets PHY IF power state to P3. Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-21net: broadcom: convert to devm_platform_ioremap_resource_byname()Dejin Zheng1-22/+11
Use the function devm_platform_ioremap_resource_byname() to simplify source code which calls the functions platform_get_resource_byname() and devm_ioremap_resource(). Remove also a few error messages which became unnecessary with this software refactoring. Suggested-by: Markus Elfring <[email protected]> Signed-off-by: Dejin Zheng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-21macvlan: fix null dereference in macvlan_device_event()Taehee Yoo1-1/+1
In the macvlan_device_event(), the list_first_entry_or_null() is used. This function could return null pointer if there is no node. But, the macvlan module doesn't check the null pointer. So, null-ptr-deref would occur. bond0 | +----+-----+ | | macvlan0 macvlan1 | | dummy0 dummy1 The problem scenario. If dummy1 is removed, 1. ->dellink() of dummy1 is called. 2. NETDEV_UNREGISTER of dummy1 notification is sent to macvlan module. 3. ->dellink() of macvlan1 is called. 4. NETDEV_UNREGISTER of macvlan1 notification is sent to bond module. 5. __bond_release_one() is called and it internally calls dev_set_mac_address(). 6. dev_set_mac_address() calls the ->ndo_set_mac_address() of macvlan1, which is macvlan_set_mac_address(). 7. macvlan_set_mac_address() calls the dev_set_mac_address() with dummy1. 8. NETDEV_CHANGEADDR of dummy1 is sent to macvlan module. 9. In the macvlan_device_event(), it calls list_first_entry_or_null(). At this point, dummy1 and macvlan1 were removed. So, list_first_entry_or_null() will return NULL. Test commands: ip netns add nst ip netns exec nst ip link add bond0 type bond for i in {0..10} do ip netns exec nst ip link add dummy$i type dummy ip netns exec nst ip link add macvlan$i link dummy$i \ type macvlan mode passthru ip netns exec nst ip link set macvlan$i master bond0 done ip netns del nst Splat looks like: [ 40.585687][ T146] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP DEI [ 40.587249][ T146] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 40.588342][ T146] CPU: 1 PID: 146 Comm: kworker/u8:2 Not tainted 5.7.0-rc1+ #532 [ 40.589299][ T146] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 40.590469][ T146] Workqueue: netns cleanup_net [ 40.591045][ T146] RIP: 0010:macvlan_device_event+0x4e2/0x900 [macvlan] [ 40.591905][ T146] Code: 00 00 00 00 00 fc ff df 80 3c 06 00 0f 85 45 02 00 00 48 89 da 48 b8 00 00 00 00 00 fc ff d2 [ 40.594126][ T146] RSP: 0018:ffff88806116f4a0 EFLAGS: 00010246 [ 40.594783][ T146] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 40.595653][ T146] RDX: 0000000000000000 RSI: ffff88806547ddd8 RDI: ffff8880540f1360 [ 40.596495][ T146] RBP: ffff88804011a808 R08: fffffbfff4fb8421 R09: fffffbfff4fb8421 [ 40.597377][ T146] R10: ffffffffa7dc2107 R11: 0000000000000000 R12: 0000000000000008 [ 40.598186][ T146] R13: ffff88804011a000 R14: ffff8880540f1000 R15: 1ffff1100c22de9a [ 40.599012][ T146] FS: 0000000000000000(0000) GS:ffff888067800000(0000) knlGS:0000000000000000 [ 40.600004][ T146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 40.600665][ T146] CR2: 00005572d3a807b8 CR3: 000000005fcf4003 CR4: 00000000000606e0 [ 40.601485][ T146] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 40.602461][ T146] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 40.603443][ T146] Call Trace: [ 40.603871][ T146] ? nf_tables_dump_setelem+0xa0/0xa0 [nf_tables] [ 40.604587][ T146] ? macvlan_uninit+0x100/0x100 [macvlan] [ 40.605212][ T146] ? __module_text_address+0x13/0x140 [ 40.605842][ T146] notifier_call_chain+0x90/0x160 [ 40.606477][ T146] dev_set_mac_address+0x28e/0x3f0 [ 40.607117][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.607762][ T146] ? __module_text_address+0x13/0x140 [ 40.608440][ T146] ? notifier_call_chain+0x90/0x160 [ 40.609097][ T146] ? dev_set_mac_address+0x1f0/0x3f0 [ 40.609758][ T146] dev_set_mac_address+0x1f0/0x3f0 [ 40.610402][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.611071][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.611823][ T146] ? netdev_notify_peers+0xc0/0xc0 [ 40.612461][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613213][ T146] ? bond_hw_addr_flush+0x77/0x100 [bonding] [ 40.613963][ T146] ? __local_bh_enable_ip+0xe9/0x1b0 [ 40.614631][ T146] ? bond_time_in_interval.isra.31+0x90/0x90 [bonding] [ 40.615484][ T146] ? __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616230][ T146] __bond_release_one+0x9f0/0x12c0 [bonding] [ 40.616949][ T146] ? bond_enslave+0x47c0/0x47c0 [bonding] [ 40.617642][ T146] ? lock_downgrade+0x730/0x730 [ 40.618218][ T146] ? check_flags.part.42+0x450/0x450 [ 40.618850][ T146] ? __mutex_unlock_slowpath+0xd0/0x670 [ 40.619519][ T146] ? trace_hardirqs_on+0x30/0x180 [ 40.620117][ T146] ? wait_for_completion+0x250/0x250 [ 40.620754][ T146] bond_netdev_event+0x822/0x970 [bonding] [ 40.621460][ T146] ? __module_text_address+0x13/0x140 [ 40.622097][ T146] notifier_call_chain+0x90/0x160 [ 40.622806][ T146] rollback_registered_many+0x660/0xcf0 [ 40.623522][ T146] ? netif_set_real_num_tx_queues+0x780/0x780 [ 40.624290][ T146] ? notifier_call_chain+0x90/0x160 [ 40.624957][ T146] ? netdev_upper_dev_unlink+0x114/0x180 [ 40.625686][ T146] ? __netdev_adjacent_dev_unlink_neighbour+0x30/0x30 [ 40.626421][ T146] ? mutex_is_locked+0x13/0x50 [ 40.627016][ T146] ? unregister_netdevice_queue+0xf2/0x240 [ 40.627663][ T146] unregister_netdevice_many.part.134+0x13/0x1b0 [ 40.628362][ T146] default_device_exit_batch+0x2d9/0x390 [ 40.628987][ T146] ? unregister_netdevice_many+0x40/0x40 [ 40.629615][ T146] ? dev_change_net_namespace+0xcb0/0xcb0 [ 40.630279][ T146] ? prepare_to_wait_exclusive+0x2e0/0x2e0 [ 40.630943][ T146] ? ops_exit_list.isra.9+0x97/0x140 [ 40.631554][ T146] cleanup_net+0x441/0x890 [ ... ] Fixes: e289fd28176b ("macvlan: fix the problem when mac address changes for passthru mode") Reported-by: [email protected] Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-04-21e1000: remove unneeded conversion to boolJason Yan1-1/+1
The '==' expression itself is bool, no need to convert it to bool again. This fixes the following coccicheck warning: drivers/net/ethernet/intel/e1000/e1000_main.c:1479:44-49: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.