aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-10-25USB: mos7840: remove NULL-urb submissionJohan Hovold1-13/+1
The private int_urb is never allocated so the submission from the control completion handler will always fail. Remove this odd piece of broken code. Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25x86: efi: Turn off efi_enabled after setup on mixed fw/kernelOlof Johansson3-8/+23
When 32-bit EFI is used with 64-bit kernel (or vice versa), turn off efi_enabled once setup is done. Beyond setup, it is normally used to determine if runtime services are available and we will have none. This will resolve issues stemming from efivars modprobe panicking on a 32/64-bit setup, as well as some reboot issues on similar setups. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=45991 Reported-by: Marko Kohtala <[email protected]> Reported-by: Maxim Kammerer <[email protected]> Signed-off-by: Olof Johansson <[email protected]> Acked-by: Maarten Lankhorst <[email protected]> Cc: [email protected] # 3.4 - 3.6 Cc: Matthew Garrett <[email protected]> Signed-off-by: Matt Fleming <[email protected]>
2012-10-25USB: qcserial: fix interface-data memory leak in error pathJohan Hovold1-15/+16
Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: option: fix interface-data memory leak in error pathJohan Hovold1-2/+19
Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Note that the usb device id is stored at probe so that it can be used in attach to determine send-setup blacklisting. Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: ipw: fix interface-data memory leak in error pathJohan Hovold1-3/+2
Move interface data allocation to attach so that it is deallocated should usb-serial probe fail. Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: mos7840: fix port-device leak in error pathJohan Hovold1-1/+0
The driver set the usb-serial port pointers to NULL on errors in attach, effectively preventing usb-serial core from decrementing the port ref counters and releasing the port devices and associated data. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: mos7840: fix urb leak at releaseJohan Hovold1-0/+1
Make sure control urb is freed at release. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: sierra: fix port-data memory leakJohan Hovold1-67/+58
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note also that urb-count for multi-port interfaces has not been changed even though the usb-serial port number is now determined from the port and interface minor numbers. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: sierra: fix memory leak in probe error pathJohan Hovold1-6/+10
Move interface data allocation to attach so that it is deallocated on errors in usb-serial probe. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: sierra: fix memory leak in attach error pathJohan Hovold1-1/+8
Make sure port private data is deallocated on errors in attach. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: usb-wwan: fix multiple memory leaks in error pathsJohan Hovold5-78/+54
Fix port-data memory leak in usb-serial probe error path by moving port data allocation to port_probe. Since commit a1028f0abf ("usb: usb_wwan: replace release and disconnect with a port_remove hook") port data is deallocated in port_remove. This leaves a possibility for memory leaks if usb-serial probe fails after attach but before the port in question has been successfully registered. Note that this patch also fixes two additional memory leaks in the error path of attach should port initialisation fail for any port as the urbs were never freed and neither was the data of any of the successfully initialised ports. Compile-only tested. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: keyspan: fix NULL-pointer dereferences and memory leaksJohan Hovold2-93/+96
Fix NULL-pointer dereference at release by moving port data allocation and deallocation to port_probe and port_remove. Fix NULL-pointer dereference at disconnect by stopping port urbs at port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer accessible at disconnect or release. Note that this patch also fixes port and interface-data memory leaks in the error path of attach should port initialisation fail for any port. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: mct_u232: fix broken closeJohan Hovold1-6/+8
Make sure generic close is called at close. The driver relies on the generic write implementation but did not call generic close. Note that the call to kill the read urb is not redundant, as mct_u232 uses an interrupt urb from the second port as the read urb and that generic close therefore fails to kill it. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: mct_u232: fix port-data memory leakJohan Hovold1-20/+25
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the write waitqueue was initialised but never used. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: opticon: fix memory leak in error pathJohan Hovold1-1/+3
Fix memory leak in write error path. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: opticon: fix DMA from stackJohan Hovold1-1/+6
Make sure to allocate the control-message buffer dynamically as some platforms cannot do DMA from stack. Note that only the first byte of the old buffer was used. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: quatech2: fix io after disconnectJohan Hovold1-0/+7
Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: quatech2: fix close and disconnect urb handlingJohan Hovold1-4/+2
Kill urbs unconditionally at close and disconnect. Note that URB status is not valid outside of completion handler. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: quatech2: fix port-data memory leaksJohan Hovold1-70/+51
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this also fixes memory leaks in the error path of attach where the write urbs were not freed on errors. Make sure all interface-data deallocation is done in release by moving the read urb deallocation from disconnect. Note that the write urb is killed during close so that the call in disconnect was superfluous. Compile-only tested. Cc: Bill Pemberton <[email protected]> Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: quatech2: fix memory leak in error pathJohan Hovold1-0/+1
Fix memory leak in attach error path where the read urb was never freed. Cc: Bill Pemberton <[email protected]> Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: omninet: fix port-data memory leakJohan Hovold1-18/+18
Fix port-data memory leak by replacing attach and release with port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: mos7720: fix port-data memory leakJohan Hovold1-30/+32
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that this patch also fixes a second port-data memory leak in the error path of attach, should parallel-port initialisation fail. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: digi_acceleport: fix port-data memory leakJohan Hovold1-50/+67
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the oob port is never registered as a port device and should thus be handled in attach and release. Compile-only tested. Cc: Peter Berger <[email protected]> Cc: Al Borchers <[email protected]> Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: ch341: fix port-data memory leakJohan Hovold1-7/+16
Fix port-data memory leak by moving port data allocation to port_probe and actually implementing deallocation. Note that this driver has never even bothered to try to deallocate it's port data... Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: whiteheat: fix port-data memory leakJohan Hovold1-33/+26
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the fifth port (command port) is never registered as a port device and thus should be handled in attach and release. Compile-only tested. Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: whiteheat: fix memory leak in error pathJohan Hovold1-0/+1
Make sure command buffer is deallocated in case of errors during attach. Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: metro-usb: fix io after disconnectJohan Hovold1-9/+6
Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25USB: metro-usb: fix port-data memory leakJohan Hovold1-37/+13
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d0631001288 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the call to metrousb_clean (close) in shutdown was redundant. Compile-only tested. Cc: <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-10-25Merge remote-tracking branches 'asoc/fix/ux500' and 'asoc/fix/wm8994' into ↵Mark Brown599-7738/+8567
for-3.7
2012-10-25ARM: socfpga: Fix socfpga compilation with early_printk() enabledPavel Machek3-17/+33
This fixes early_printk() compilation for socfpga. (senduart/busyuart/waituart were missing). It does that by making Picochip code generic. Signed-off-by: Pavel Machek <[email protected]> Acked-by: Dinh Nguyen <[email protected]> Acked-by: Jamie Iles <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25ARM: SPEAr: Remove unused empty filesViresh Kumar2-0/+0
Few empty files (spear1310_misc_regs.h and spear1340_misc_regs.h) are created by commit b31e23726 "SPEAr13xx: Add header files". Don't know how they got added, obviously my fault :) But nobody could even catch them in reviews. Remove them. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25Merge tag 'omap-for-v3.7-rc2/fixes-signed' of ↵Arnd Bergmann9-18/+56
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren <[email protected]>: Timer fix for am33xx, runtime PM fix for UART, audio McBSP fixes, mux and pinctrl fixes, and Beagle OPP fix. * tag 'omap-for-v3.7-rc2/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500 ARM: OMAP3: Beagle: fix OPP customization and initcall ordering ARM: OMAP3: Fix 3430 legacy mux names for ssi1 signals. ARM: OMAP2+: Fix location of select PINCTRL ARM/dts: omap3: Fix mcbsp2/3 hwmods to be able to probe the drivers for audio ARM: OMAP2: UART: fix console UART mismatched runtime PM status ARM: OMAP3: PM: apply part of the erratum i582 workaround Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25MAINTAINERS: Add arm-soc tree entryStephen Boyd1-0/+7
Document the arm-soc tree in the maintainers file so that developers know how arm SoC development is structured. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25Merge tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6 into fixesArnd Bergmann6-13/+14
Patches from Sascha Hauer <[email protected]>: ARM i.MX fixes for 3.7-rc * tag 'imx-fixes' of git://git.pengutronix.de/git/imx/linux-2.6: ARM i.MX25: Fix PWM per clock lookups ARM i.MX25 clk: Fix nfc_ipg_per parent ARM i.MX25: Fix lcdc_ipg_per parent clock ARM: mxc: platform-mxc-mmc: Fix register region size ARM: imx: clk-imx27: Fix divider width field ARM: imx: fix the return value check in imx_clk_busy_divider() ARM: imx_v6_v7_defconfig: Enable CONFIG_GPIO_MC9S08DZ60 ARM: imx: fix return value check in imx3_init_l2x0() Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25Merge branch 'for-rcs-3.7' of ↵Arnd Bergmann2-1/+17
git://git.linaro.org/people/ljones/linux-3.0-ux500 into fixes * 'for-rcs-3.7' of git://git.linaro.org/people/ljones/linux-3.0-ux500: ARM: ux500: Correct SDI5 address and add some format changes ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann583-7697/+8451
From Nicolas Ferre <[email protected]>: A mix of typos and critical fixes. The most important ones are a duplicated definition of a Kconfig variable and the handling of external interrupts for non-DT case. The new at91sam9g10 was suffering a recognition issue due to an ID mis-interpreted: this was leading to a kernel panic. * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: (257 commits) ARM: at91: drop duplicated config SOC_AT91SAM9 entry ARM: at91/i2c: change id to let i2c-at91 work ARM: at91/i2c: change id to let i2c-gpio work ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels. ARM: at91: fix external interrupt specification in board code ARM: at91: fix external interrupts in non-DT case ARM: at91: at91sam9g10: fix SOC type detection ARM: at91/tc: fix typo in the DT document Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25ARM: dts: mxs: add the "clock-names" for gpmi-nandHuang Shijie2-0/+2
The current DT nodes for mx23/mx28 miss the `clocks-names` item for gpmi-nand. So the gpmi-nand driver could not find the proper clock. This patch fixes this issue. Signed-off-by: Huang Shijie <[email protected]> Reviewed-by: Marek Vasut <[email protected]> Acked-by: Shawn Guo <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-10-25ARM: ux500: Correct SDI5 address and add some format changesLee Jones1-1/+6
Here we fix a simple copy and paste error and bring some node spaces back into line with the remainder of the tree. Acked-by: Linus Walleij <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2012-10-25ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DTLee Jones1-0/+10
Now the Nomadik I2C driver has been converted to an AMBA one, we are required to provide the Primecell IDs via platform code. When booting with DT enabled these have to be specified in the device nodes. We do that here. Acked-by: Linus Walleij <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2012-10-25ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKELee Jones1-0/+1
This patch fixes the build error below: arch/arm/mach-ux500/cpu.c: In function ‘ux500_init_irq’: arch/arm/mach-ux500/cpu.c:55:2: error: invalid use of undefined type ‘struct irq_chip’ arch/arm/mach-ux500/cpu.c:55:24: error: ‘IRQCHIP_SKIP_SET_WAKE’ undeclared (first use in this function) arch/arm/mach-ux500/cpu.c:55:24: note: each undeclared identifier is reported only once for each function it appears in arch/arm/mach-ux500/cpu.c:55:48: error: ‘IRQCHIP_MASK_ON_SUSPEND’ undeclared (first use in this function) Acked-by: Linus Walleij <[email protected]> Signed-off-by: Lee Jones <[email protected]>
2012-10-24vhost: fix mergeable bufs on BE hostsMichael S. Tsirkin1-1/+2
We copy head count to a 16 bit field, this works by chance on LE but on BE guest gets 0. Fix it up. Signed-off-by: Michael S. Tsirkin <[email protected]> Tested-by: Alexander Graf <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2012-10-24gianfar_ptp: use iomem, not ioports resource tree in probeWei Yang1-1/+1
When using a 36 bit dtb file, the driver complains "resource busy". Investigating the source of the message leads one to the gianfar_ptp_probe function. Since the type of the device resource requested in this function is IORESOURCE_MEM, it should use "iomem_resource" instead of "ioports_resource". Signed-off-by: Wei Yang <[email protected]> Cc: Claudiu Manoil <[email protected]> Cc: Timur Tabi <[email protected]> Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-24Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-canDavid S. Miller2-5/+27
Marc Kleine-Budde says: ==================== here are two patches for the v3.7 release cycle. A patch by Wolfgang Grandegger for the flexcan driver, which switches off a workaround on the imx6q that is not needed, because the hardware is not affected by that bug. And a patch by Stephane Grosjean which updates the pci device table for the peak pci sja1000 ==================== Signed-off-by: David S. Miller <[email protected]>
2012-10-24ipv6: Set default hoplimit as zero.Li RongQing1-2/+2
Commit a02e4b7dae4551(Demark default hoplimit as zero) only changes the hoplimit checking condition and default value in ip6_dst_hoplimit, not zeros all hoplimit default value. Keep the zeroing ip6_template_metrics[RTAX_HOPLIMIT - 1] to force it as const, cause as a37e6e344910(net: force dst_default_metrics to const section) Signed-off-by: Li RongQing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-24NET_VENDOR_TI: make available for am33xx as wellPeter Korsgaard1-1/+1
The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI visible for it as well. Signed-off-by: Peter Korsgaard <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-24pch_gbe: fix error handling in pch_gbe_up()Veaceslav Falico1-6/+11
If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-10-24Merge tag 'spi-linus' of ↵Linus Torvalds3-27/+34
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi fixes from Mark Brown: "A bunch of fixes here, mostly minor except for the pl022 which has just been a bit of a shambles all round, the recent runtime PM changes have as far as I can tell never worked so they're just getting thrown out." * tag 'spi-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/pl022: Revert recent runtime PM changes spi: tsc2005: delete soon-obsolete e-mail address spi: spi-rspi: fix build error for the latest shdma driver
2012-10-24Merge tag 'iommu-fixes-v3.7-rc2' of ↵Linus Torvalds2-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two fixes this time: 1. Another fix for a broken BIOS to detect when AMD IOMMU interrupt remapping can not work reliably 2. Typo fix for NVidia IOMMU driver" * tag 'iommu-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/tegra: smmu: Fix deadly typo iommu/amd: Work around wrong IOAPIC device-id in IVRS table
2012-10-24Merge tag 'pinctrl-v3.7-rc3' of ↵Linus Torvalds7-23/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "This fixes a few pinctrl problems seen since v3.7-rc1: - Section tagging for init code - Use proper pointers to lookup struct device * in the bcm2835 (a.k.a. Raspberry Pi) - Remove duplicate #includes - Fix bad return values in errorpath - Remove extraneous pull function from the sirf driver causing build errors - Provide compilation stubs for the Nomadik pinctrl driver when used with legacy systems without PRCMU units - Various irqdomain fixes in the Nomadik driver as predicted - Various smallish bugs in the Tegra driver, most also targeted for stable - Removed a deadlocking mutex in the groups debugfs show function" * tag 'pinctrl-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/nomadik: pass DT node to the irqdomain pinctrl/nomadik: use zero as default irq_start pinctrl: fix missing unlock on error in pinctrl_groups_show() pinctrl/nomadik: use irq_create_mapping() pinctrl: remove mutex lock in groups show pinctrl: tegra: correct bank for pingroup and drv pingroup pinctrl: tegra: set low power mode bank width to 2 dt: Document: correct tegra20/30 pinctrl slew-rate name
2012-10-24Merge branch 'for-linus' of ↵Linus Torvalds1-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull apparmor bugfix from James Morris. Fix a possibly unbounded recursion by iterating over the entries instead. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: apparmor: fix IRQ stack overflow during free_profile
Powered by cgit, Gruvboxed by Blaster4385.