aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-26drm/amdgpu: Enable gpu reset for S3 abort cases on Raven seriesPrike Liang1-20/+25
Currently, GPU resets can now be performed successfully on the Raven series. While GPU reset is required for the S3 suspend abort case. So now can enable gpu reset for S3 abort cases on the Raven series. Signed-off-by: Prike Liang <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdgpu/pm: Fix the power1_min_cap valueMa Jun5-25/+20
It's unreasonable to use 0 as the power1_min_cap when OD is disabled. So, use the same lower limit as the value used when OD is enabled. Fixes: 1958946858a6 ("drm/amd/pm: Support for getting power1_cap_min value") Signed-off-by: Ma Jun <[email protected]> Acked-by: Alex Deucher <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdgpu: Do not program SQ_TIMEOUT_CONFIG in SRIOVVictor Lu1-0/+3
VF should not program this register. Signed-off-by: Victor Lu <[email protected]> Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdgpu: Fix ineffective ras_mask settingsStanley.Yang1-0/+1
Check amdgpu_ras_mask to fix ineffective ras_mask setting due to special asic without sram ecc enable but with poison supported. Signed-off-by: Stanley.Yang <[email protected]> Reviewed-by: Tao Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdkfd: Skip packet submission on fatal errorLijo Lazar6-7/+23
If fatal error is detected, packet submission won't go through. Return error in such cases. Also, avoid waiting for fence when fatal error is detected. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdgpu: Add fatal error detected flagLijo Lazar3-0/+39
For a RAS error that needs a full reset to recover, set the fatal error status. Clear the status once the device is reset. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amd/display: Prevent potential buffer overflow in map_hw_resourcesSrinivasan Shanmugam1-0/+5
Adds a check in the map_hw_resources function to prevent a potential buffer overflow. The function was accessing arrays using an index that could potentially be greater than the size of the arrays, leading to a buffer overflow. Adds a check to ensure that the index is within the bounds of the arrays. If the index is out of bounds, an error message is printed and break it will continue execution with just ignoring extra data early to prevent the buffer overflow. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7 drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7 Fixes: 7966f319c66d ("drm/amd/display: Introduce DML2") Cc: Rodrigo Siqueira <[email protected]> Cc: Roman Li <[email protected]> Cc: Qingqing Zhuo <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Tom Chung <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Suggested-by: Roman Li <[email protected]> Reviewed-by: Roman Li <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-26drm/amdgpu: Fix the runtime resume failure issueMa Jun1-0/+3
Don't set power state flag when system enter runtime suspend, or it may cause runtime resume failure issue. Fixes: 3a9626c816db ("drm/amd: Stop evicting resources on APUs in suspend") Signed-off-by: Ma Jun <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: fix null-pointer dereference on edid readingMelissa Wen1-4/+15
Use i2c adapter when there isn't aux_mode in dc_link to fix a null-pointer derefence that happens when running igt@kms_force_connector_basic in a system with DCN2.1 and HDMI connector detected as below: [ +0.178146] BUG: kernel NULL pointer dereference, address: 00000000000004c0 [ +0.000010] #PF: supervisor read access in kernel mode [ +0.000005] #PF: error_code(0x0000) - not-present page [ +0.000004] PGD 0 P4D 0 [ +0.000006] Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 15 PID: 2368 Comm: kms_force_conne Not tainted 6.5.0-asdn+ #152 [ +0.000005] Hardware name: HP HP ENVY x360 Convertible 13-ay1xxx/8929, BIOS F.01 07/14/2021 [ +0.000004] RIP: 0010:i2c_transfer+0xd/0x100 [ +0.000011] Code: ea fc ff ff 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 55 53 <48> 8b 47 10 48 89 fb 48 83 38 00 0f 84 b3 00 00 00 83 3d 2f 80 16 [ +0.000004] RSP: 0018:ffff9c4f89c0fad0 EFLAGS: 00010246 [ +0.000005] RAX: 0000000000000000 RBX: 0000000000000005 RCX: 0000000000000080 [ +0.000003] RDX: 0000000000000002 RSI: ffff9c4f89c0fb20 RDI: 00000000000004b0 [ +0.000003] RBP: ffff9c4f89c0fb80 R08: 0000000000000080 R09: ffff8d8e0b15b980 [ +0.000003] R10: 00000000000380e0 R11: 0000000000000000 R12: 0000000000000080 [ +0.000002] R13: 0000000000000002 R14: ffff9c4f89c0fb0e R15: ffff9c4f89c0fb0f [ +0.000004] FS: 00007f9ad2176c40(0000) GS:ffff8d90fe9c0000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000004] CR2: 00000000000004c0 CR3: 0000000121bc4000 CR4: 0000000000750ee0 [ +0.000003] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000006] <TASK> [ +0.000006] ? __die+0x23/0x70 [ +0.000011] ? page_fault_oops+0x17d/0x4c0 [ +0.000008] ? preempt_count_add+0x6e/0xa0 [ +0.000008] ? srso_alias_return_thunk+0x5/0x7f [ +0.000011] ? exc_page_fault+0x7f/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? i2c_transfer+0xd/0x100 [ +0.000010] drm_do_probe_ddc_edid+0xc2/0x140 [drm] [ +0.000067] ? srso_alias_return_thunk+0x5/0x7f [ +0.000006] ? _drm_do_get_edid+0x97/0x3c0 [drm] [ +0.000043] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000042] edid_block_read+0x3b/0xd0 [drm] [ +0.000043] _drm_do_get_edid+0xb6/0x3c0 [drm] [ +0.000041] ? __pfx_drm_do_probe_ddc_edid+0x10/0x10 [drm] [ +0.000043] drm_edid_read_custom+0x37/0xd0 [drm] [ +0.000044] amdgpu_dm_connector_mode_valid+0x129/0x1d0 [amdgpu] [ +0.000153] drm_connector_mode_valid+0x3b/0x60 [drm_kms_helper] [ +0.000000] __drm_helper_update_and_validate+0xfe/0x3c0 [drm_kms_helper] [ +0.000000] ? amdgpu_dm_connector_get_modes+0xb6/0x520 [amdgpu] [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] drm_helper_probe_single_connector_modes+0x2ab/0x540 [drm_kms_helper] [ +0.000000] status_store+0xb2/0x1f0 [drm] [ +0.000000] kernfs_fop_write_iter+0x136/0x1d0 [ +0.000000] vfs_write+0x24d/0x440 [ +0.000000] ksys_write+0x6f/0xf0 [ +0.000000] do_syscall_64+0x60/0xc0 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? syscall_exit_to_user_mode+0x2b/0x40 [ +0.000000] ? srso_alias_return_thunk+0x5/0x7f [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] ? do_syscall_64+0x6c/0xc0 [ +0.000000] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ +0.000000] RIP: 0033:0x7f9ad46b4b00 [ +0.000000] Code: 40 00 48 8b 15 19 b3 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 80 3d e1 3a 0e 00 00 74 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 48 89 [ +0.000000] RSP: 002b:00007ffcbd3bd6d8 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ +0.000000] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9ad46b4b00 [ +0.000000] RDX: 0000000000000002 RSI: 00007f9ad48a7417 RDI: 0000000000000009 [ +0.000000] RBP: 0000000000000002 R08: 0000000000000064 R09: 0000000000000000 [ +0.000000] R10: 0000000000000000 R11: 0000000000000202 R12: 00007f9ad48a7417 [ +0.000000] R13: 0000000000000009 R14: 00007ffcbd3bd760 R15: 0000000000000001 [ +0.000000] </TASK> [ +0.000000] Modules linked in: ctr ccm rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel btmtk bluetooth uvcvideo videobuf2_vmalloc sha3_generic videobuf2_memops uvc jitterentropy_rng videobuf2_v4l2 videodev drbg videobuf2_common ansi_cprng mc ecdh_generic ecc qrtr binfmt_misc hid_sensor_accel_3d hid_sensor_magn_3d hid_sensor_gyro_3d hid_sensor_trigger industrialio_triggered_buffer kfifo_buf industrialio snd_ctl_led joydev hid_sensor_iio_common rtw89_8852ae rtw89_8852a rtw89_pci snd_hda_codec_realtek rtw89_core snd_hda_codec_generic intel_rapl_msr ledtrig_audio intel_rapl_common snd_hda_codec_hdmi mac80211 snd_hda_intel snd_intel_dspcfg kvm_amd snd_hda_codec snd_soc_dmic snd_acp3x_rn snd_acp3x_pdm_dma libarc4 snd_hwdep snd_soc_core kvm snd_hda_core cfg80211 snd_pci_acp6x snd_pcm nls_ascii snd_timer hp_wmi snd_pci_acp5x nls_cp437 snd_rn_pci_acp3x ucsi_acpi sparse_keymap ccp snd platform_profile snd_acp_config typec_ucsi irqbypass vfat sp5100_tco [ +0.000000] snd_soc_acpi fat rapl pcspkr wmi_bmof roles rfkill rng_core snd_pci_acp3x soundcore k10temp watchdog typec battery ac amd_pmc acpi_tad button hid_sensor_hub hid_multitouch evdev serio_raw msr parport_pc ppdev lp parport fuse loop efi_pstore configfs ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 btrfs blake2b_generic dm_crypt dm_mod efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c crc32c_generic xor raid6_pq raid1 raid0 multipath linear md_mod amdgpu amdxcp i2c_algo_bit drm_ttm_helper ttm crc32_pclmul crc32c_intel drm_exec gpu_sched drm_suballoc_helper nvme ghash_clmulni_intel drm_buddy drm_display_helper sha512_ssse3 nvme_core ahci xhci_pci sha512_generic hid_generic xhci_hcd libahci rtsx_pci_sdmmc t10_pi i2c_hid_acpi drm_kms_helper i2c_hid mmc_core libata aesni_intel crc64_rocksoft_generic crypto_simd amd_sfh crc64_rocksoft scsi_mod usbcore cryptd crc_t10dif cec drm crct10dif_generic hid rtsx_pci crct10dif_pclmul scsi_common rc_core crc64 i2c_piix4 [ +0.000000] usb_common crct10dif_common video wmi [ +0.000000] CR2: 00000000000004c0 [ +0.000000] ---[ end trace 0000000000000000 ]--- Fixes: 0e859faf8670 ("drm/amd/display: Remove unwanted drm edid references") Signed-off-by: Melissa Wen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add vcn 4.0.6 discovery supportYifan Zhang1-0/+1
This patch is to add vcn 4.0.6 support Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Use RMW accessors for changing LNKCTL2Ilpo Järvinen2-52/+30
Convert open coded RMW accesses for LNKCTL2 to use pcie_capability_clear_and_set_word() which makes its easier to understand what the code tries to do. LNKCTL2 is not really owned by any driver because it is a collection of control bits that PCI core might need to touch. RMW accessors already have support for proper locking for a selected set of registers (LNKCTL2 is not yet among them but likely will be in the future) to avoid losing concurrent updates. Acked-by: Alex Deucher <[email protected]> Suggested-by: Lukas Wunner <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Simplify the allocation of sync slab cachesKunwu Chan1-3/+1
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by: Christian König <[email protected]> Signed-off-by: Kunwu Chan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu/soc21: Enabling PG and CG flags for VCN 4.0.6Veerabadhran Gopalakrishnan1-2/+7
Enabled the VCN Power Gating and Clock Gating flags for VCN 4.0.6. Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu/display: Address kdoc for 'is_psr_su' in 'fill_dc_dirty_rects'Srinivasan Shanmugam1-0/+4
The is_psr_su parameter is a boolean flag indicating whether the Panel Self Refresh Selective Update (PSR SU) feature is enabled which is a power-saving feature that allows only the updated regions of the screen to be refreshed, reducing the amount of data that needs to be sent to the display. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5257: warning: Function parameter or member 'is_psr_su' not described in 'fill_dc_dirty_rects' Fixes: d16df040c8da ("drm/amdgpu: make damage clips support configurable") Cc: [email protected] Cc: Hamza Mahfooz <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Rodrigo Siqueira <[email protected]> Cc: Aurabindo Pillai <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/radeon: Use RMW accessors for changing LNKCTL2Ilpo Järvinen2-50/+30
Convert open coded RMW accesses for LNKCTL2 to use pcie_capability_clear_and_set_word() which makes its easier to understand what the code tries to do. LNKCTL2 is not really owned by any driver because it is a collection of control bits that PCI core might need to touch. RMW accessors already have support for proper locking for a selected set of registers (LNKCTL2 is not yet among them but likely will be in the future) to avoid losing concurrent updates. Acked-by: Alex Deucher <[email protected]> Suggested-by: Lukas Wunner <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Fix memory leak in dm_sw_fini()Armin Wolf1-0/+1
After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Use kcalloc() instead of kzalloc()Lenko Donchev1-1/+1
We are trying to get rid of all multiplications from allocation functions to prevent integer overflows. Here the multiplication is obviously safe, but using kcalloc() is more appropriate and improves readability. This patch has no effect on runtime behavior. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Link: https://github.com/KSPP/linux/issues/162 Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Lenko Donchev <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Simplify the allocation of mux_chunk slab cachesKunwu Chan1-3/+1
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by: Christian König <[email protected]> Signed-off-by: Kunwu Chan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Simplify the allocation of fence slab cachesKunwu Chan1-3/+1
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Reviewed-by: Christian König <[email protected]> Signed-off-by: Kunwu Chan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu/soc21: Added Video Capabilities for VCN 406Veerabadhran Gopalakrishnan1-0/+6
Updated Query Video codecs for VCN 406 Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu/vcn: Enable VCN 4.0.6 SupportVeerabadhran Gopalakrishnan2-0/+5
Modified driver to use the appropriate FW files and instance. v2: squash in fixes (Alex) Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu/jpeg: add support for jpeg multi instanceSaleemkhan Jamadar1-54/+123
Enable support for multi instance on JPEG 4.0.6. v2: squash in fixes (Alex) Signed-off-by: Saleemkhan Jamadar <[email protected]> Reviewed-by: Veerabadhran Gopalakrishnan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdkfd: fix process reference drop on debug ioctlJonathan Kim1-0/+1
Prevent dropping the KFD process reference at the end of a debug IOCTL call where the acquired process value is an error. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Use correct SRIOV macro for gmc_v9_0_vm_fault_interrupt_stateVictor Lu1-4/+4
Under SRIOV, programming to VM_CONTEXT*_CNTL regs failed because the current macro does not pass through the correct xcc instance. Use the *REG32_XCC macro in this case. The behaviour without SRIOV is the same without this patch. Signed-off-by: Victor Lu <[email protected]> Reviewed-by: Zhigang Luo <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Do not program IH_CHICKEN in vega20_ih.c under SRIOVVictor Lu1-18/+20
IH_CHICKEN is blocked for VF writes; this access should be skipped. Signed-off-by: Victor Lu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Improve error checking in amdgpu_virt_rlcg_reg_rw (v2)Victor Lu2-2/+4
The current error detection only looks for a timeout. This should be changed to also check scratch_reg1 for any errors returned from RLCG. v2: remove new error value Signed-off-by: Victor Lu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: enable MES discovery for GC 11.5.1Yifan Zhang1-0/+1
This patch to enable MES for GC 11.5.1 Reviewed-by: shaoyun.liu <[email protected]> Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add GC 11.5.1 discovery supportYifan Zhang1-0/+1
This patch to add GC 11.5.1 support Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdkfd: add KFD support for GC 11.5.1Yifan Zhang2-0/+8
Enable KFD for GC 11.5.1. Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: enable CGPG for GFX ip v11.5.1Tim Huang1-2/+21
Enable CGPG support for GFX ip v11.5.1 Signed-off-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: initialize gfx11.5.1Yifan Zhang1-1/+7
Initialize gfx 11.5.0 and set gfx hw configuration. v2: squash in CG, PG, GFXOFF fixes (Alex) Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add mes firmware support for GC 11.5.1Yifan Zhang1-0/+2
This patch to add MES PIPE0 and PIPE1 firmware support for gc_11_5_1. Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add imu firmware support for GC 11.5.1Yifan Zhang1-0/+1
This patch is to add imu firmware support for GC 11.5.1 Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add firmware for GC 11.5.1Yifan Zhang1-0/+4
This patch is to add firmware for GC 11.5.1 Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add GC 11.5.1 to GC 11.5.0 familyYifan Zhang1-0/+2
This patch to add GC 11.5.1 to GC 11.5.0 family. Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: enable soc21 discovery support for GC 11.5.1Yifan Zhang1-0/+1
This patch to enable soc21 support for GC 11.5.1 Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: add initial GC 11.5.1 soc21 supportYifan Zhang1-0/+5
Disable clock gating and power gating for now. v2: squash in revision fix (Alex) Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: enable gmc11 discovery support for GC 11.5.1Yifan Zhang1-0/+1
This patch to enable gmc11 for GC 11.5.1 Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd: Update atomfirmware.h for DCN401Aurabindo Pillai1-0/+32
Add new firmware header definitions reqiured for DCN401 Signed-off-by: Aurabindo Pillai <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: 3.2.273Aric Cyr1-1/+1
This version brings along the following: - Re-enable windowed MPO support for DCN32/321 - Improvements in the subvp feature - Code clean up - USB4 fixes Acked-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Fix nanosec stat overflowAric Cyr1-2/+2
[Why] Nanosec stats can overflow on long running systems potentially causing statistic logging issues. [How] Use 64bit types for nanosec stats to ensure no overflow. Reviewed-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Drop unnecessary headerRodrigo Siqueira7-14/+0
A long time ago, the slab header was added to multiple files in DC. We also included it in the os_types.h, which is included in many of those DC files. At this point, there is no need to insert the slab.h header in multiple files, so this commit drops those includes. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: reenable windowed mpo odm support on dcn32 and dcn321Wenjing Liu2-1/+2
[why] The feature was disabled due to regression found during testing. Now that all the pending issues are addressed, we are reenabling the power saving feature again. The feature optimizes dispclk level when user is using MPO capable broswers or watching MPO capable videos in windowed mode. The feature achieves power optimization by utilizing free pipes to process incoming pixels in parallel. So it reduces max dispclk requirements for each pipe. Previously ODM power optimization will be disabled when MPO plane is present due to technical challeges. This is mainly because ODM divides pixel workload with respect to stream but MPO plane position and size are arbitrary with respect to stream. The pixel processing workload of an MPO plane is not guarenteed to be evenly distributed across DCN pipes. For example if a plane is moved inside single ODM slice, all the processing for the plane is distributed to the pipe in the current ODM slice, while the other ODM slices don't need to process this plane. If the plane is then moved to the middle crosing two ODM slices, each ODM slice gets half of the workload. This is especially difficult when the plane itself has a large source rect which can't be processed by single DCN pipe. In this case we can't enable ODM power optimization when the plane is only within one ODM slice. [how] To overcome the challeges, new pipe resource management is in place to make sure a plane is validated with ODM power optimization support if it can be validated regardless of its position and the same pipe topology can be used regardless of the plane's position. When the plane is moved outside current ODM slice, we will set recout to 0 so the pipe can be idling without the need to update pipe topology. When the user resizes a plane, it may result in downscaling ratio changes. When the downscaling ratio is above single pipe's threshold, we will seamlessly exit ODM power optimization and applies MPC combine to support the plane. when downscaling ratio becomes smaller, we will seamlessly enter ODM power optimization again. All these pipe transitions happen automatically and quietly when the conditions are met without any visual impacts to the user. Reviewed-by: Martin Leung <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Remove pixle rate limit for subvpAlvin Lee1-1/+0
Subvp bugs related to 8K60 have been fixed, so remove the limit that blocks 8K60 timings from enabling SubVP. Reviewed-by: Nevenko Stupar <[email protected]> Reviewed-by: Chaitanya Dhere <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Only log during optimize_bandwidth callEthan Bitnun1-1/+1
Prevent logs during a prepare_bandwidth call to ensure log accuracy. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Ethan Bitnun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: fix input states translation error for dcn35 & dcn351Swapnil Patel1-1/+8
[Why] Currently there is an error while translating input clock sates into output clock states. The highest fclk setting from output sates is being dropped because of this error. [How] For dcn35 and dcn351, make output_states equal to input states. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Swapnil Patel <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Generalize new minimal transition pathAlvin Lee2-100/+77
Previously the new minimal transition path was only used for windowed MPO + ODM for plane scaling updates. However, we want to generalize the transition for all cases whenever a non-seamless transition is detected (such as for MPO -> SubVP + MPC). To make this change we add pointers in the plane state, stream, and pointers in the stream state to the dc_scratch state and backup and restore these so the minimal transition can take place successfully. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amd/display: Check DP Alt mode DPCS state via DMUBGeorge Shen2-19/+71
[Why] Currently, driver state for DCN3.2 is not strictly matching HW state for the USBC port. To reduce inconsistencies while debugging, the driver should match HW configuration. [How] Update link encoder flag to indicate USBC port. Call into DMUB to check when DP Alt mode is entered, and also to check for 2-lane versuse 4-lane mode. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: George Shen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22drm/amdgpu: Remove pcie bw sys entryAsad Kamal2-2/+2
Remove pcie bw sys entry for asics not supporting such function Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2024-02-22Revert "drm/amdgpu: Add pcie usage callback to nbio"Asad Kamal2-11/+0
pcie usage is now handled by fw This reverts commit 8d759dc6644df4141a151293cb0e77fd8ca379ed. Signed-off-by: Asad Kamal <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.