aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-21drm/amd/display: Match actual state during S3 resume.Leo (Sunpeng) Li1-0/+36
During system suspend, we: 1. Cache a duplicate of the current DRM atomic state, which calls hooks to duplicate our internal states. 2. Call hooks to disable all functionalities. 3. System suspended. During resume, we attempt to restore the cached state. However, our interal states are now stale, since step 1 was done before step 2. i.e. our cached state does not reflect the disabled nature of things. This change resolves that by destroying all relevant states to reflect the actual state during resume. Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: update mpc add/remove functionsEric Bernstein3-70/+130
Signed-off-by: Eric Bernstein <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: fix multi-display on CZRoman Li1-8/+21
- fixed wrong index in dce110_validate_surface_sets() - formatted for better readability Signed-off-by: Roman Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> igned-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: Refactor dcn10_dpp_cm_helper to dcn10_cm_commonYue Hin Lau4-5/+5
Signed-off-by: Yue Hin Lau <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: Don't report fake sink as connectedHarry Wentland1-1/+2
This was missed in the previous fake sink change. The fake sink allows us to enable a pipe with a disconnected display. We shouldn't report it as connected. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Andrey Grodzovsky <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: To prevent detecting new sink from spurious HPDMartin Tsai2-13/+21
Signed-off-by: Martin Tsai <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: Add FBC on/off to front-end programmingRoman Li1-0/+9
- Fixing text mode for cases when VT-switch doesn't result in timing change Signed-off-by: Roman Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: fix usb-c dongle regressionEric Yang1-2/+0
A previous change moved link_disconnect_sink after dpcd read, this causes the sink count to be overwritten which in turn causes another detection to be triggered in the short pulse handler, which brings down the display. Signed-off-by: Eric Yang <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: Force always scale chroma, set always_scaled to falseAndrew Jiang2-8/+5
This allows us to not always have scaling on, which causes issues with validation and causes the text to blur slightly. Signed-off-by: Andrew Jiang <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-21drm/amd/display: Driver message to SMU to indicate display offHersen Wu4-17/+28
Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-16drm/amd/display: To prevent detecting new sink from spurious HPDMartin Tsai1-14/+34
Signed-off-by: Martin Tsai <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17Merge remote-tracking branch 'pfdo/drm-next' into drm-nextDave Airlie216-3359/+8658
Pull in drm-next for the object find API changes. Fix the one place the API crashes. Signed-off-by: Dave Airlie <[email protected]>
2017-10-17drm/amd/display: drop unused dm_delay_in_microsecondsAlex Deucher1-7/+0
No longer used. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display/dc: drop dm_delay_in_microsecondsAlex Deucher3-7/+4
Use udelay directly. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: make amdgpu_dm_irq_handler staticAlex Deucher2-12/+3
It's not used outside the file. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: remove unused functions in amdgpu_dm_irq.cAlex Deucher2-67/+0
Not used. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: whitespace cleanup in amdgpu_dm_irq.c/hAlex Deucher2-85/+64
To match kernel standards. No intended functional change. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: make log_dpcd staticAlex Deucher1-5/+5
It's only used in this file. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: whitespace cleanup in amdgpu_dm_mst_types.c/hAlex Deucher2-22/+22
To match kernel standards. No intended functional change. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: drop unused functions in amdgpu_dm_services.cAlex Deucher1-53/+0
not used. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: drop unused functions in amdgpu_dm.cAlex Deucher1-82/+0
Not used anywhere. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: make a bunch of stuff in amdgpu_dm.c staticAlex Deucher2-104/+91
Not used outside of that file. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: whitespace cleanup in amdgpu_dm.c/hAlex Deucher2-229/+192
To match kernel standards. No intended functional change. Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: fix typo in function nameAlex Deucher2-10/+5
s/amdgpu_dm_find_first_crct_matching_connector/ amdgpu_dm_find_first_crtc_matching_connector/ And while here, make it static. Reviewed-by: Harry Wentland <[email protected]> Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Remove useless pcrtc pointerLeo (Sunpeng) Li1-3/+3
in amdgpu_dm_atomic_commit_tail. Just use crtc instead. Reviewed-by: Maarten Lankhorst <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Fix typoLeo (Sunpeng) Li1-2/+2
undersacn -> underscan Reviewed-by: Maarten Lankhorst <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Unify amdgpu_dm state variable namings.Leo (Sunpeng) Li1-69/+68
Use dm_new_*_state and dm_old_*_state for their respective amdgpu_dm new and old object states. Helps with readability, and enforces use of new DRM api (choose either new, or old). Reviewed-by: Maarten Lankhorst <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Unify DRM state variable namings.Leo (Sunpeng) Li1-40/+40
Use new_*_state and old_*_state for their respective new/old DRM object states. Reviewed-by: Maarten Lankhorst <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Use new DRM API where possibleLeo (Sunpeng) Li1-65/+66
To conform to DRM's new API, we should not be accessing a DRM object's internal state directly. Rather, the DRM for_each_old/new_* iterators, and drm_atomic_get_old/new_* interface should be used. This is an ongoing process. For now, update the DRM-facing atomic functions, where the atomic state object is given. Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17drm/amd/display: Use DRM new-style object iterators.Dave Airlie2-28/+17
Use the correct for_each_new/old_* iterators instead of for_each_* The following functions were considered: amdgpu_dm_find_first_crtc_matching_connector: use for_each_new - Old from_state_var flag was always choosing the new state amdgpu_dm_display_resume: use for_each_new - drm_atomic_helper_duplicate_state is called during suspend to cache the state - It sets 'state' within the state triplet to 'new_state' amdgpu_dm_commit_planes: use for_each_old - Called after the state was swapped (via atomic commit tail) amdgpu_dm_atomic_commit: use for_each_new - Called before the state is swapped amdgpu_dm_atomic_commit_tail: use for_each_old - Called after the state was swapped dm_update_crtcs_state: use for_each_new - Called before the state is swapped (via atomic check) amdgpu_dm_atomic_check: use for_each_new - Called before the state is swapped v2: Split out typo fixes to a new patch. v3: Say "functions considered" instead of "affected functions". The latter implies that changes are made to each. [airlied: squashed with my hacks] Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Maarten Lankhorst <[email protected]> Signed-off-by: Leo (Sunpeng) Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-10-17Merge tag 'drm-misc-next-2017-10-16' of ↵Dave Airlie23-123/+142
git://anongit.freedesktop.org/drm/drm-misc into drm-next Quick 4.15 misc pull for the build fix: Cross-subsystem Changes: - piles an piles of misc/trivial patches all over, some more from outreachy applicants Core Changes: - build fix for the bridge/of cleanup (Maarten) - fix vblank count in arm_vblank_event (Ville) - some kerneldoc typo fixes from Thierry Driver Changes: - vc4: Fix T-format tiling scanout, cleanup clock divider w/a (Anholt) - sun4i: small cleanups and improved code comments all over (Chen-Yu Tsai) * tag 'drm-misc-next-2017-10-16' of git://anongit.freedesktop.org/drm/drm-misc: (21 commits) drm/via: use ARRAY_SIZE drm/gma500: use ARRAY_SIZE drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set function drm/sun4i: hdmi: Document PAD_CTRL1 output invert bits drm/sun4i: backend: Add comment explaining why registers are cleared drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memory drm/sun4i: backend: Create regmap after access is possible drm/sun4i: don't add components that are already in the queue drm/vc4: Fix pitch setup for T-format scanout. drm/vc4: Move the DSI clock divider workaround closer to the clock call. drm: Replace kzalloc with kcalloc drm/tinydrm: Remove explicit .best_encoder assignment drm/tinydrm: Replace dev_error with DRM_DEV_ERROR drm/drm_of: Move drm_of_panel_bridge_remove_function into header. drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event() drm/atomic-helper: Fix typo drm: Add missing __user annotation to drm_syncobj_array_find() drm/rockchip: add PINCTRL dependency for LVDS drm/kirin: Checking for IS_ERR() instead of NULL driver:gpu: return -ENOMEM on allocation failure. ...
2017-10-16drm/via: use ARRAY_SIZEJérémy Lefaure1-6/+4
Using the ARRAY_SIZE macro improves the readability of the code. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by: Thierry Reding <[email protected]> Signed-off-by: Jérémy Lefaure <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/gma500: use ARRAY_SIZEJérémy Lefaure1-5/+4
Using the ARRAY_SIZE macro improves the readability of the code. Also, it is useless to re-invent it. Found with Coccinelle with the following semantic patch: @r depends on (org || report)@ type T; T[] E; position p; @@ ( (sizeof(E)@p /sizeof(*E)) | (sizeof(E)@p /sizeof(E[...])) | (sizeof(E)@p /sizeof(T)) ) Reviewed-by: Thierry Reding <[email protected]> Signed-off-by: Jérémy Lefaure <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: hdmi: Move PAD_CTRL1 setting to mode_set functionChen-Yu Tsai1-10/+16
Initially we configured the PAD_CTRL1 register at probe/bind time. However it seems the HDMI controller will modify some of the bits in this register by itself. On the A10 it is particularly annoying as it toggles the output invert bits, which inverts the colors on the display output. The U-boot driver this driver is based on sets this register twice, though it seems it's only needed for actual display output. Hence we move it to the mode_set function. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: hdmi: Document PAD_CTRL1 output invert bitsChen-Yu Tsai1-0/+5
While debugging inverted color from the HDMI output on the A10, I found that the lowest 3 bits were set. These were cleared on A20 boards that had normal display output. By manually toggling these bits the mapping of the color components to these bits was found. While these are not used anywhere, it would be nice to document them somewhere. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: backend: Add comment explaining why registers are clearedChen-Yu Tsai1-1/+8
Many of the backend's layer configuration registers have undefined default values. This poses a risk as we use regmap_update_bits in some places, and don't overwrite the whole register. At probe/bind time we explicitly clear all the control registers by writing 0 to them. This patch adds a more detailed explanation on why we're doing this. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: backend: Use drm_fb_cma_get_gem_addr() to get display memoryChen-Yu Tsai1-13/+2
Commit 4636ce93d5b2 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()") adds a new helper, which covers fetching a drm_framebuffer's GEM object and calculating the buffer address for a given plane. This patch uses this helper to replace our own open coded version of the same function. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: backend: Create regmap after access is possibleChen-Yu Tsai1-7/+7
The backend has various clocks and reset controls that need to be enabled and deasserted before register access is possible. Move the creation of the regmap to after the clocks and reset controls have been configured where it makes more sense. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-16drm/sun4i: don't add components that are already in the queueChen-Yu Tsai1-0/+16
Even though the components framework can handle duplicate entries, the extra entries cause a lot more debug messages to be generated, which would be confusing to developers not familiar with our driver and the framework in general. Instead, we can scan the relatively small queue and check if the component to be added is already queued up. Since the display pipelines are symmetrical (not considering the third display pipeline on the A80), and we add components level by level, when we get to the second instance at the same level, any shared downstream components would already be in the queue. Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm/vc4: Fix pitch setup for T-format scanout.Eric Anholt1-5/+15
The documentation said to use src_w here, and I didn't consider that we actually needed to be using pitch somewhere in our setup. Fixes scanout on my DSI panel when X11 does initial setup with 1920x1080 HDMI and 800x480 DSI both at 0,0 of the same framebuffer. v2: Add some comments requested by Boris Signed-off-by: Eric Anholt <[email protected]> Fixes: 98830d91da08 ("drm/vc4: Add T-format scanout support.") Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Boris Brezillon <[email protected]>
2017-10-14Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie19-330/+1148
drm-next Most notable addition this time is the support for the GPU performance counters by Christian. This has been in the making for some time and it has matured a lot. Since this is adding UAPI, the corresponding WIP userspace can be found at [1] mesa/libdrm repos. I expect that Christian sends out the final userspace patches for this once you have pulled the kernel bits. Philipp optimized the probe path, so etnaviv gets out of the way for systems that want to boot real quick. I've done mostly cleanups, disentangling etnaviv from the IOMMU API, with some MMUv1 optimizations on the way. * 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux: (36 commits) drm/etnaviv: remove unnecessary clock stabilization delay drm/etnaviv: reduce reset delay drm/etnaviv: remove unused function etnaviv_gem_new drm/etnaviv: remove stale comment drm/etnaviv: submit supports performance monitor requests drm/etnaviv: enable debug registers on demand drm/etnaviv: need to disable clock gating when doing profiling drm/etnaviv: add MC perf domain drm/etnaviv: add TX perf domain drm/etnaviv: add RA perf domain drm/etnaviv: add SE perf domain drm/etnaviv: add PA perf domain drm/etnaviv: add SH perf domain drm/etnaviv: add PE perf domain drm/etnaviv: add HI perf domain drm/etnaviv: use 'sync points' for performance monitor requests drm/etnaviv: clear alloced event drm/etnaviv: add 'sync point' support drm/etnaviv: add performance monitor request processing drm/etnaviv: copy pmrs from userspace ...
2017-10-13drm/vc4: Move the DSI clock divider workaround closer to the clock call.Eric Anholt1-6/+6
We want the adjusted_mode->clock to be the actual clock we're expecting to program, so that consumers see the right values for clock and vrefresh. Signed-off-by: Eric Anholt <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Boris Brezillon <[email protected]>
2017-10-13drm: Replace kzalloc with kcallocHarsha Sharma3-4/+4
Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by: Harsha Sharma <[email protected]> Reviewed-by: Jani Nikula <[email protected]> Signed-off-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm/tinydrm: Remove explicit .best_encoder assignmentHaneen Mohammed1-1/+0
Since the driver is relying on the atomic helpers, remove the explicit .best_encoder assignment and let the core call drm_atomic_helper_best_encoder(). Signed-off-by: Haneen Mohammed <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
2017-10-13drm/tinydrm: Replace dev_error with DRM_DEV_ERRORHarsha Sharma3-22/+20
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros. Signed-off-by: Harsha Sharma <[email protected]> Signed-off-by: Noralf Trønnes <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm/drm_of: Move drm_of_panel_bridge_remove_function into header.Maarten Lankhorst2-36/+26
Core drm shouldn't depend on anything in drm-kms-helper, or the drm module will fail to load. insmod drm fails with [ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0) which is defined in drm_kms_helper.ko This call was added by commit c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function"), and the fix is defining it in the drm_of.h header, to break the circular dependency. Signed-off-by: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Daniel Vetter <[email protected]> #irc Fixes: c70087e8f16f ("drm/drm_of: add drm_of_panel_bridge_remove function") Acked-by: Benjamin Gaignard <[email protected]>
2017-10-13drm/atomic-helper: Fix reference to drm_crtc_send_vblank_event()Thierry Reding1-1/+1
Fix up this reference so that the proper link is generated in the documentation and so that people don't go chasing after the wrong function for an embarrassingly long time. Acked-by: Noralf Trønnes <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm/atomic-helper: Fix typoThierry Reding1-1/+1
Fix "esay-to-use" to "easy-to-use" typo. Acked-by: Noralf Trønnes <[email protected]> Signed-off-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2017-10-13drm: Add missing __user annotation to drm_syncobj_array_find()Ville Syrjälä1-1/+2
'user_handles' needs a __user annotation for fix the following sparse warning: drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:813:37: expected void const [noderef] <asn:1>*from drm_syncobj.c:813:37: got void *user_handles drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:875:38: expected void *user_handles drm_syncobj.c:875:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:908:38: expected void *user_handles drm_syncobj.c:908:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:941:38: expected void *user_handles drm_syncobj.c:941:38: got void [noderef] <asn:1>*<noident> Cc: Jason Ekstrand <[email protected]> Fixes: 3e6fb72d6cef ("drm/syncobj: Add a syncobj_array_find helper") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Thierry Reding <[email protected]>
2017-10-13Merge tag 'omapdrm-4.15' of ↵Dave Airlie11-30/+522
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for 4.15 * OMAP4 HDMI CEC support * tag 'omapdrm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omapdrm: omapdss_hdmi_ops: add lost_hotplug op omapdrm: hdmi4: hook up the HDMI CEC support omapdrm: hdmi4_cec: add OMAP4 HDMI CEC support omapdrm: hdmi4: refcount hdmi_power_on/off_core omapdrm: hdmi4: move hdmi4_core_powerdown_disable to hdmi_power_on_core() omapdrm: hdmi4: prepare irq handling for HDMI CEC support omapdrm: hdmi4: make low-level functions available omapdrm: hdmi.h: extend hdmi_core_data with CEC fields omapdrm: encoder-tpd12s015: keep ls_oe_gpio high
Powered by cgit, Gruvboxed by Blaster4385.