| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
TX doorbells may be postponed, because sometimes the driver knows that
another packet follows (for example, when xmit_more is true, or when a
MPWQE session is closed before transmitting a packet).
However, the DMA mapping may fail for the next packet, in which case a
new WQE is not posted, the doorbell isn't updated either, and the
transmission of the previous packet will be delayed indefinitely.
This commit fixes the described rare error flow by posting a NOP and
ringing the doorbell on errors to flush all the previous packets. The
MPWQE session is closed before that. DMA mapping in the MPWQE flow is
moved to the beginning of mlx5e_sq_xmit_mpwqe, because empty sessions
are not allowed. Stop room always has enough space for a NOP, because
the actual TX WQE is not posted.
Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The existing capability check for vnic env counters only checks for
receive steering discards, although we need the counters update for the
exposed internal queue oob counter as well. This could result in the
latter counter not being updated correctly when the receive steering
discards counter is not supported.
Fix that by checking whether any counter is supported instead of only
the steering counter capability.
Fixes: 0cfafd4b4ddf ("net/mlx5e: Add device out of buffer counter")
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Allocate a ct priv workqueue instead of using mlx5e priv one
so flushing will only be of related CT entries.
Also move flushing of the workqueue before rhashtable destroy
otherwise entries won't be valid.
Fixes: b069e14fff46 ("net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Oz Shlomo <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
mode & mode_flags is updated at the end of mlx5_activate_lag which
may not reflect the actual mode as shown in below logic:
mlx5_activate_lag(struct mlx5_lag *ldev,
|-- unsigned long flags = 0;
|-- err = mlx5_lag_set_flags(ldev, mode, tracker, shared_fdb, &flags);
|-- err = mlx5_create_lag(ldev, tracker, mode, flags);
|-- mlx5_get_str_port_sel_mode(ldev);
|-- ldev->mode = mode;
|-- ldev->mode_flags = flags;
Use mode & flag as parameters to get port select mode info.
Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Liu, Changcheng <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
There is a total of four 4M entries flow tables. In sriov disabled
mode, ct, ct_nat and post_act take three of them. When adding the
first tc nic rule in this mode, it will take another 4M table
for the tc <chain,prio> table. If user then enables sriov, the legacy
flow table tries to take another 4M and fails, and so enablement fails.
To fix that, have legacy fdb take the next available maximum
size from the fs ft pool.
Fixes: 4a98544d1827 ("net/mlx5: Move chains ft pool to be used by all firmware steering")
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Use the correct constant (TLS_DRIVER_STATE_SIZE_RX) in the comparison
against the size of the private RX TLS driver context.
Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Use the correct constant (TLS_DRIVER_STATE_SIZE_TX) in the comparison
against the size of the private TX TLS driver context.
Fixes: df8d866770f9 ("net/mlx5e: kTLS, Use kernel API to extract private offload context")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Multiport eswitch is required to use native FDB selection instead of
affinity, This was achieved by passing the shared_fdb flag down
the HW lag creation path. While it did accomplish the goal of setting
FDB selection mode to native, it had the side effect of also
creating a shared FDB configuration.
This created a few issues:
- TC rules are inserted into a non active FDB, which means traffic isn't
offloaded as all traffic will reach only a single FDB.
- All wire traffic is treated as if a single physical port received it; while
this is true for a bond configuration, this shouldn't be the case for
multiport eswitch.
Create a new flag MLX5_LAG_MODE_FLAG_FDB_SEL_MODE_NATIVE
to indicate what FDB selection mode should be used.
Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Mark Bloch <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Redirecting traffic from uplink to a VF is a legal operation of
mulitport eswitch mode. Remove the limitation.
Fixes: 94db33177819 ("net/mlx5: Support multiport eswitch mode")
Signed-off-by: Eli Cohen <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Pull OpenRISC fixes from Stafford Horne:
"Fixups for OpenRISC found during recent testing:
- An OpenRISC irqchip fix to stop acking level interrupts which was
causing issues on SMP platforms
- A comment typo fix in our unwinder code"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: unwinder: Fix grammar issue in comment
irqchip: or1k-pic: Undefine mask_ack for level triggered hardware
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became largish as it includes the pending ASoC fixes.
Almost all changes are device-specific small fixes, while many of them
are coverage for mixer issues that were detected by selftest. In
addition, usual suspects for HD/USB-audio are there"
* tag 'sound-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (43 commits)
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
ALSA: usb-audio: Add quirk for Fiero SC-01 (fw v1.0.0)
ALSA: usb-audio: Add quirk for Fiero SC-01
ALSA: hda/realtek: Add quirk for Clevo L140PU
ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices
ASoC: madera: Fix event generation for rate controls
ASoC: madera: Fix event generation for OUT1 demux
ASoC: cs47l15: Fix event generation for low power mux control
ASoC: cs35l41: Add ASP TX3/4 source to register patch
ASoC: dapm: Initialise kcontrol data for mux/demux controls
ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO error
ASoC: cs35l41: Correct some control names
ASoC: wm5110: Fix DRE control
ASoC: wm_adsp: Fix event for preloader
MAINTAINERS: update ASoC Qualcomm maintainer email-id
ASoC: rockchip: i2s: switch BCLK to GPIO
ASoC: SOF: Intel: disable IMR boot when resuming from ACPI S4 and S5 states
ASoC: SOF: pm: add definitions for S4 and S5 states
ASoC: SOF: pm: add explicit behavior for ACPI S1 and S2
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
...
|
|
The byte queue limits (BQL) mechanism is intended to move queuing from
the driver to the network stack in order to reduce latency caused by
excessive queuing in hardware. However, when transmitting or redirecting
a packet using generic XDP, the qdisc layer is bypassed and there are no
additional queues. Since netif_xmit_stopped() also takes BQL limits into
account, but without having any alternative queuing, packets are
silently dropped.
This patch modifies the drop condition to only consider cases when the
driver itself cannot accept any more packets. This is analogous to the
condition in __dev_direct_xmit(). Dropped packets are also counted on
the device.
Bypassing the qdisc layer in the generic XDP TX path means that XDP
packets are able to starve other packets going through a qdisc, and
DDOS attacks will be more effective. In-driver-XDP use dedicated TX
queues, so they do not have this starvation issue.
Signed-off-by: Johan Almbladh <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This reverts commit 284b4d93daee56dff3e10029ddf2e03227f50dbf.
When using TLS device offload and coming from tls_device_reencrypt()
flow, -EBADMSG error in tls_do_decryption() should not be counted
towards the TLSTlsDecryptError counter.
Move the counter increase back to the decrypt_internal() call site in
decrypt_skb_update().
This also fixes an issue where:
if (n_sgin < 1)
return -EBADMSG;
Errors in decrypt_internal() were not counted after the cited patch.
Fixes: 284b4d93daee ("tls: rx: move counting TlsDecryptErrors for sync")
Cc: Jakub Kicinski <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Mat Martineau says:
====================
mptcp: Path manager fixes for 5.19
The MPTCP userspace path manager is new in 5.19, and these patches fix
some issues in that new code.
Patches 1-3 fix path manager locking issues.
Patches 4 and 5 allow userspace path managers to change priority of
established subflows using the existing MPTCP_PM_CMD_SET_FLAGS generic
netlink command. Includes corresponding self test update.
Patches 6 and 7 fix accounting of available endpoint IDs and the
MPTCP_MIB_RMSUBFLOW counter.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch increases MPTCP_MIB_RMSUBFLOW mib counter in userspace pm
destroy subflow function mptcp_nl_cmd_sf_destroy() when removing subflow.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In mptcp_pm_nl_rm_addr_or_subflow() we always mark as available
the id corresponding to the just removed address.
The used bitmap actually tracks only the local IDs: we must
restrict the operation when a (local) subflow is removed.
Fixes: a88c9e496937 ("mptcp: do not block subflows creation on errors")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This change updates the testing sample (pm_nl_ctl) to exercise
the updated MPTCP_PM_CMD_SET_FLAGS command for userspace PMs to
issue MP_PRIO signals over the selected subflow.
E.g. ./pm_nl_ctl set 10.0.1.2 port 47234 flags backup token 823274047 rip 10.0.1.1 rport 50003
userspace_pm.sh has a new selftest that invokes this command.
Fixes: 259a834fadda ("selftests: mptcp: functional tests for the userspace PM type")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Kishen Maloor <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This change updates MPTCP_PM_CMD_SET_FLAGS to allow userspace PMs
to issue MP_PRIO signals over a specific subflow selected by
the connection token, local and remote address+port.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/286
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Kishen Maloor <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When setting up a subflow's flags for sending MP_PRIO MPTCP options, the
subflow socket lock was not held while reading and modifying several
struct members that are also read and modified in mptcp_write_options().
Acquire the subflow socket lock earlier and send the MP_PRIO ACK with
that lock already acquired. Add a new variant of the
mptcp_subflow_send_ack() helper to use with the subflow lock held.
Fixes: 067065422fcd ("mptcp: add the outgoing MP_PRIO support")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The in-kernel path manager code for changing subflow flags acquired both
the msk socket lock and the PM lock when possibly changing the "backup"
and "fullmesh" flags. mptcp_pm_nl_mp_prio_send_ack() does not access
anything protected by the PM lock, and it must release and reacquire
the PM lock.
By pushing the PM lock to where it is needed in mptcp_pm_nl_fullmesh(),
the lock is only acquired when the fullmesh flag is changed and the
backup flag code no longer has to release and reacquire the PM lock. The
change in locking context requires the MIB update to be modified - move
that to a better location instead.
This change also makes it possible to call
mptcp_pm_nl_mp_prio_send_ack() for the userspace PM commands without
manipulating the in-kernel PM lock.
Fixes: 0f9f696a502e ("mptcp: add set_flags command in PM netlink")
Acked-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The user-space PM subflow removal path uses a couple of helpers
that must be called under the msk socket lock and the current
code lacks such requirement.
Change the existing lock scope so that the relevant code is under
its protection.
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/287
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Vlad Buslov says:
====================
net: Fix police 'continue' action offload
TC act_police with 'continue' action had been supported by mlx5 matchall
classifier offload implementation for some time. However, 'continue' was
assumed implicitly and recently got broken in multiple places. Fix it in
both TC hardware offload validation code and mlx5 driver.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Referenced commit prepared the code for upcoming extension that allows mlx5
to offload police action attached to flower classifier. However, with
regard to existing matchall classifier offload validation should be
reversed as FLOW_ACTION_CONTINUE is the only supported notexceed police
action type. Fix the problem by allowing FLOW_ACTION_CONTINUE for police
action and extend scan_tc_matchall_fdb_actions() to only allow such actions
with matchall classifier.
Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters")
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Saeed Mahameed <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Offloading police with action TC_ACT_UNSPEC was erroneously disabled even
though it was supported by mlx5 matchall offload implementation, which
didn't verify the action type but instead assumed that any single police
action attached to matchall classifier is a 'continue' action. Lack of
action type check made it non-obvious what mlx5 matchall implementation
actually supports and caused implementers and reviewers of referenced
commits to disallow it as a part of improved validation code.
Fixes: b8cd5831c61c ("net: flow_offload: add tc police action parameters")
Fixes: b50e462bc22d ("net/sched: act_police: Add extack messages for offload failure")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Instead of counting the child nodes in the device tree, hardcode the
number of ports in the driver itself. The counting won't work at all
if an ethernet port is marked as disabled, e.g. because it is not
connected on the board at all.
It turns out that the LAN9662 and LAN9668 use the same switching IP
with the same synthesis parameters. The only difference is that the
output ports are not connected. Thus, we can just hardcode the
number of physical ports to 8.
Fixes: db8bcaad5393 ("net: lan966x: add the basic lan966x driver")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Horatiu Vultur <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix deadlock when powering on.
* tag 'for-net-2022-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: core: Fix deadlock on hci_power_on_sync.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
`cancel_work_sync(&hdev->power_on)` was moved to hci_dev_close_sync in
commit [1] to ensure that power_on work is canceled after HCI interface
down.
But, in certain cases power_on work function may call hci_dev_close_sync
itself: hci_power_on -> hci_dev_do_close -> hci_dev_close_sync ->
cancel_work_sync(&hdev->power_on), causing deadlock. In particular, this
happens when device is rfkilled on boot. To avoid deadlock, move
power_on work canceling out of hci_dev_do_close/hci_dev_close_sync.
Deadlock introduced by commit [1] was reported in [2,3] as broken
suspend. Suspend did not work because `hdev->req_lock` held as result of
`power_on` work deadlock. In fact, other BT features were not working.
It was not observed when testing [1] since it was verified without
rfkill in place.
NOTE: It is not needed to cancel power_on work from other places where
hci_dev_do_close/hci_dev_close_sync is called in case:
* Requests were serialized due to `hdev->req_workqueue`. The power_on
work is first in that workqueue.
* hci_rfkill_set_block which won't close device anyway until HCI_SETUP
is on.
* hci_sock_release which runs after hci_sock_bind which ensures
HCI_SETUP was cleared.
As result, behaviour is the same as in pre-dd06ed7 commit, except
power_on work cancel added to hci_dev_close.
[1]: commit ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close")
[2]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/lkml/[email protected]/
Fixes: ff7f2926114d ("Bluetooth: core: Fix missing power_on work cancel on HCI close")
Signed-off-by: Vasyl Vavrychuk <[email protected]>
Reported-by: Max Krummenacher <[email protected]>
Reported-by: Mateusz Jonczyk <[email protected]>
Tested-by: Max Krummenacher <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen security fixes from Juergen Gross:
- XSA-403 (4 patches for blkfront and netfront drivers):
Linux Block and Network PV device frontends don't zero memory regions
before sharing them with the backend (CVE-2022-26365,
CVE-2022-33740). Additionally the granularity of the grant table
doesn't allow sharing less than a 4K page, leading to unrelated data
residing in the same 4K page as data shared with a backend being
accessible by such backend (CVE-2022-33741, CVE-2022-33742).
- XSA-405 (1 patch for netfront driver, only 5.10 and newer):
While adding logic to support XDP (eXpress Data Path), a code label
was moved in a way allowing for SKBs having references (pointers)
retained for further processing to nevertheless be freed.
- XSA-406 (1 patch for Arm specific dom0 code):
When mapping pages of guests on Arm, dom0 is using an rbtree to keep
track of the foreign mappings.
Updating of that rbtree is not always done completely with the
related lock held, resulting in a small race window, which can be
used by unprivileged guests via PV devices to cause inconsistencies
of the rbtree. These inconsistencies can lead to Denial of Service
(DoS) of dom0, e.g. by causing crashes or the inability to perform
further mappings of other guests' memory pages.
* tag 'xsa-5.19-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: Fix race in RB-tree based P2M accounting
xen-netfront: restore __skb_queue_tail() positioning in xennet_get_responses()
xen/blkfront: force data bouncing when backend is untrusted
xen/netfront: force data bouncing when backend is untrusted
xen/netfront: fix leaking data in shared pages
xen/blkfront: fix leaking data in shared pages
|
|
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Fixes: 5bff69b3645d ("ALSA: cs46xx: Allocate resources with device-managed APIs")
Cc: <[email protected]>
Reported-and-tested-by: Jan Engelhardt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
'fix-bridge_vlan_aware-sh-and-bridge_vlan_unaware-sh-with-iff_unicast_flt'
Vladimir Oltean says:
====================
Fix bridge_vlan_aware.sh and bridge_vlan_unaware.sh with IFF_UNICAST_FLT
Make sure that h1 and h2 don't drop packets with a random MAC DA, which
otherwise confuses these selftests. Also, fix an incorrect error message
found during those failures.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467ec ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf67a ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Tested-by: Ido Schimmel <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
can 2022-07-04
The 1st patch is by Oliver Hartkopp, targets the BCM CAN protocol and
converts a costly synchronize_rcu() to call_rcu() to fix a performance
regression.
Srinivas Neeli's patch for the xilinx_can driver drops the brp limit
down to 1, as only the pre-production silicon have an issue with a brp
of 1.
The next patch is by Duy Nguyen and fixes the data transmission on
R-Car V3U SoCs in the rcar_canfd driver.
Rhett Aultman's patch fixes a DMA memory leak in the gs_usb driver.
Liang He's patch removes an extra of_node_get() in the grcan driver.
The next 2 patches are by me, target the m_can driver and fix the
timestamp handling used for peripheral devices like the tcan4x5x.
Jimmy Assarsson contributes 3 patches for the kvaser_usb driver and
fixes CAN clock and bit timing related issues.
The remaining 5 patches target the mcp251xfd driver. Thomas Kopp
contributes 2 patches to improve the workaround for broken CRC when
reading the TBC register. 3 patches by me add a missing
hrtimer_cancel() during the ndo_stop() callback, and fix the reading
of the Device ID register.
* tag 'linux-can-fixes-for-5.19-20220704' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion
can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id
can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()
can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register
can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
can: m_can: m_can_chip_config(): actually enable internal timestamping
can: grcan: grcan_probe(): remove extra of_node_get()
can: gs_usb: gs_usb_open/close(): fix memory leak
can: rcar_canfd: Fix data transmission failed on R-Car V3U
Revert "can: xilinx_can: Limit CANFD brp to 2"
can: bcm: use call_rcu() instead of costly synchronize_rcu()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of minor patches for Arm DTS files and soc specific
drivers:
- More reference counting bug fixes for DT nodes, and other trivial
code fixes
- Multiple code fixes for the Arm SCMI firmware driver to improve
compatibility with firmware implementations.
- A patch series for at91 to address power management issues from
using the wrong DT compatible properties.
- A series of patches to fix pad settings for NXP imx8mp to leave the
configuration untouched from the boot loader
- Additional DT fixes for qualcomm and NXP platforms
- A boot time fix for stm32mp15 DT
- Konrad Dybcio becomes an additional reviewer for the Qualcomm
platforms"
* tag 'soc-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
soc: qcom: smem: use correct format characters
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
soc: ixp4xx/npe: Fix unused match warning
ARM: at91: pm: Mark at91_pm_secure_init as __init
ARM: at91: fix soc detection for SAM9X60 SiPs
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatible for sama5d2's rtc
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes
STM32 DT fixes for v5.19, round 2
Highlights:
-----------
-Fixes STM32MP15:
- Add missing usbh clock and fix clk order for usbh to avoid PLL
issue.
- Fix SCMI version: use scmi regulator and update missing SCMI
clocks to be able to correcly boot.
* tag 'stm32-dt-for-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
ARM: dts: stm32: delete fixed clock node on STM32MP15-SCMI
ARM: dts: stm32: DSI should use LSE SCMI clock on DK1/ED1 STM32 board
ARM: dts: stm32: use the correct clock source for CEC on stm32mp151
ARM: dts: stm32: fix pwr regulators references to use scmi
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
When compiling with -Wformat, clang emits the following warnings:
drivers/soc/qcom/smem.c:847:41: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "bad host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
drivers/soc/qcom/smem.c:852:47: warning: format specifies type 'unsigned
short' but the argument has type 'unsigned int' [-Wformat]
dev_err(smem->dev, "duplicate host %hu\n", remote_host);
~~~ ^~~~~~~~~~~
%u
./include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
~~~ ^~~~~~~~~~~
./include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
~~~ ^~~~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct one and change type of
remote_host to "u16" to match with other types.
Signed-off-by: Bill Wendling <[email protected]>
Tested-by: Justin Stitt <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
|
|
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fiero SC-01 is a USB sound card with two mono inputs and a single
stereo output. The inputs are composed into a single stereo stream.
The device uses a vendor-provided driver on Windows and does not work
at all without it. The driver mostly provides ASIO functionality, but
also alters the way the sound card is queried for sample rates and
clocks.
ALSA queries those failing with an EPIPE (same as Windows 10 does).
Presumably, the vendor-provided driver does not query it at all, simply
matching by VID:PID. Thus, I consider this a buggy firmware and adhere
to a set of fixed endpoint quirks instead.
The soundcard has an internal clock. Implicit feedback mode is required
for the playback.
I have updated my device to v1.1.0 from a Windows 10 VM using a vendor-
provided binary prior to the development, hoping for it to just begin
working. The device provides no obvious way to downgrade the firmware,
and regardless, there's no binary available for v1.0.0 anyway.
Thus, I will be getting another unit to extend the patch with support
for that. Expected to be a simple copy-paste of the existing one,
though.
There were no previous reports of that device in context of Linux
anywhere. Other issues have been reported though, but that's out of the
scope.
Signed-off-by: Egor Vorontsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fixes headset detection on Clevo L140PU.
Signed-off-by: Tim Crawford <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.
Signed-off-by: John Veness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
In mcp251xfd_register_get_dev_id() the device ID register is read with
handcrafted SPI transfers. As all registers, this register is in
little endian. Further it is not naturally aligned in struct
mcp251xfd_map_buf_nocrc::data. However after the transfer the register
content is converted from big endian to CPU endianness not taking care
of being unaligned.
Fix the conversion by converting from little endian to CPU endianness
taking the unaligned source into account.
Side note: So far the register content is 0x0 on all mcp251xfd
compatible chips, and is only used for an informative printk.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reviewed-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
dev_id
The device ID register is 32 bits wide. The driver uses incorrectly
the size of a pointer to a u32 to calculate the length of the SPI
transfer. This results in a read of 2 registers on 64 bit platforms.
This is no problem on the Linux side, as the RX buffer of the SPI
transfer is large enough. In the mpc251xfd chip this results in the
read of an undocumented register. So far no problems were observed.
Fix the length of the SPI transfer to read the device ID register
only.
Link: https://lore.kernel.org/all/[email protected]
Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Reported-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
In commit 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing
support") software based TX coalescing was added to the driver. The
key idea is to keep the TX complete IRQ disabled for some time after
processing it and re-enable later by a hrtimer. When bringing the
interface down, this timer has to be stopped.
Add the missing hrtimer_cancel() of the tx_irq_time hrtimer to
mcp251xfd_stop().
Link: https://lore.kernel.org/all/[email protected]
Fixes: 169d00a25658 ("can: mcp251xfd: add TX IRQ coalescing support")
Cc: [email protected] # v5.18
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
TBC register
The mcp251xfd compatible chips have an erratum ([1], [2]), where the
received CRC doesn't match the calculated CRC. In commit
c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work
around broken CRC on TBC register") the following workaround was
implementierend.
- If a CRC read error on the TBC register is detected and the first
byte is 0x00 or 0x80, the most significant bit of the first byte is
flipped and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
For now we assume transferred data was OK.
New investigations and simulations indicate that the CRC send by the
device is calculated on correct data, and the data is incorrectly
received by the SPI host controller.
Use flipped instead of original data and update workaround description
in mcp251xfd_regmap_crc_read().
[1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands"
[2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands"
Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com
Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register")
Cc: [email protected]
Signed-off-by: Thomas Kopp <[email protected]>
[mkl: split into 2 patches, update patch description and documentation]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
mcp2517fd
The mcp251xfd compatible chips have an erratum ([1], [2]), where the
received CRC doesn't match the calculated CRC. In commit
c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work
around broken CRC on TBC register") the following workaround was
implementierend.
- If a CRC read error on the TBC register is detected and the first
byte is 0x00 or 0x80, the most significant bit of the first byte is
flipped and the CRC is calculated again.
- If the CRC now matches, the _original_ data is passed to the reader.
For now we assume transferred data was OK.
Measurements on the mcp2517fd show that the workaround is applicable
not only of the lowest byte is 0x00 or 0x80, but also if 3 least
significant bits are set.
Update check on 1st data byte and workaround description accordingly.
[1] mcp2517fd: DS80000792C: "Incorrect CRC for certain READ_CRC commands"
[2] mcp2518fd: DS80000789C: "Incorrect CRC for certain READ_CRC commands"
Link: https://lore.kernel.org/all/DM4PR11MB53901D49578FE265B239E55AFB7C9@DM4PR11MB5390.namprd11.prod.outlook.com
Fixes: c7eb923c3caf ("can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC register")
Cc: [email protected]
Reported-by: Pavel Modilaynen <[email protected]>
Signed-off-by: Thomas Kopp <[email protected]>
[mkl: split into 2 patches, update patch description and documentation]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Use correct bittiming limits depending on device. For devices based on
USBcanII, Leaf M32C or Leaf i.MX28.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe")
Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Jimmy Assarsson <[email protected]>
[mkl: remove stray netlink.h include]
[mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
The firmware of M32C based Leaf devices expects bittiming parameters
calculated for 16MHz clock. Since we use the actual clock frequency of
the device, the device may end up with wrong bittiming parameters,
depending on user requested parameters.
This regression affects M32C based Leaf devices with non-16MHz clock.
Fixes: fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device")
Link: https://lore.kernel.org/all/[email protected]
Cc: [email protected]
Signed-off-by: Jimmy Assarsson <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Unify and move compile-time known information into new struct
kvaser_usb_driver_info, in favor of run-time checks.
All Kvaser USBcanII supports listen-only mode and error counter
reporting.
Link: https://lore.kernel.org/all/[email protected]
Suggested-by: Marc Kleine-Budde <[email protected]>
Cc: [email protected]
Signed-off-by: Jimmy Assarsson <[email protected]>
[mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|