aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-04-28NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSIONOlga Kornievskaia3-0/+15
Currently, if the client sends BIND_CONN_TO_SESSION with NFS4_CDFC4_FORE_OR_BOTH but only gets NFS4_CDFS4_FORE back it ignores that it wasn't able to enable a backchannel. To make sure, the client sends BIND_CONN_TO_SESSION as the first operation on the connections (ie., no other session compounds haven't been sent before), and if the client's request to bind the backchannel is not satisfied, then reset the connection and retry. Cc: [email protected] Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-04-28SUNRPC: defer slow parts of rpc_free_client() to a workqueue.NeilBrown2-5/+24
The rpciod workqueue is on the write-out path for freeing dirty memory, so it is important that it never block waiting for memory to be allocated - this can lead to a deadlock. rpc_execute() - which is often called by an rpciod work item - calls rcp_task_release_client() which can lead to rpc_free_client(). rpc_free_client() makes two calls which could potentially block wating for memory allocation. rpc_clnt_debugfs_unregister() calls into debugfs and will block while any of the debugfs files are being accessed. In particular it can block while any of the 'open' methods are being called and all of these use malloc for one thing or another. So this can deadlock if the memory allocation waits for NFS to complete some writes via rpciod. rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't obvious that memory allocations can happen while the lock it held, it is safer to assume they might and to not let rpciod call rpc_clnt_remove_pipedir(). So this patch moves these two calls (together with the final kfree() and rpciod_down()) into a work-item to be run from the system work-queue. rpciod can continue its important work, and the final stages of the free can happen whenever they happen. I have seen this deadlock on a 4.12 based kernel where debugfs used synchronize_srcu() when removing objects. synchronize_srcu() requires a workqueue and there were no free workther threads and none could be allocated. While debugsfs no longer uses SRCU, I believe the deadlock is still possible. Signed-off-by: NeilBrown <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-04-28drm/amdgpu: bump version for invalidate L2 before SDMA IBsMarek Olšák1-1/+2
This fixes GPU hangs due to cache coherency issues. Bump the driver version. Split out from the original patch. Signed-off-by: Marek Olšák <[email protected]> Reviewed-by: Christian König <[email protected]> Tested-by: Pierre-Eric Pelloux-Prayer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amdgpu: invalidate L2 before SDMA IBs (v2)Marek Olšák2-1/+29
This fixes GPU hangs due to cache coherency issues. v2: Split the version bump to a separate patch Signed-off-by: Marek Olšák <[email protected]> Reviewed-by: Christian König <[email protected]> Tested-by: Pierre-Eric Pelloux-Prayer <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-04-28drm/amdgpu: add tiling flags from MesaMarek Olšák1-0/+4
DCC_INDEPENDENT_128B is needed for displayble DCC on gfx10. SCANOUT is not needed by the kernel, but Mesa uses it. Signed-off-by: Marek Olšák <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28drm/amd/powerplay: avoid using pm_en before it is initialized revisedTiecheng Zhou1-2/+4
hwmgr->pm_en is initialized at hwmgr_hw_init. during amdgpu_device_init, there is amdgpu_asic_reset that calls to soc15_asic_reset (for V320 usecase, Vega10 asic), in which: 1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en) 2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en) pm_en is used in the above two cases while it has not yet been initialized So avoid using pm_en in the above two functions for V320 passthrough. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Tiecheng Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"Tiecheng Zhou1-2/+1
This reverts commit c5207876232649ca5e5ddd6f966d2da75ffded8f. The commit being reverted changed the wrong place, it should have changed in func get_asic_baco_capability. Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Tiecheng Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-04-28dmaengine: dmatest: Fix process hang when reading 'wait' parameterAndy Shevchenko1-1/+1
If we do % echo 1 > /sys/module/dmatest/parameters/run [ 115.851124] dmatest: Could not start test, no channels configured % echo dma8chan7 > /sys/module/dmatest/parameters/channel [ 127.563872] dmatest: Added 1 threads using dma8chan7 % cat /sys/module/dmatest/parameters/wait ... !!! HANG !!! ... The culprit is the commit 6138f967bccc ("dmaengine: dmatest: Use fixed point div to calculate iops") which makes threads not to run, but pending and being kicked off by writing to the 'run' node. However, it forgot to consider 'wait' routine to avoid above mentioned case. In order to fix this, check for really running threads, i.e. with pending and done flags unset. It's pity the culprit commit hadn't updated documentation and tested all possible scenarios. Fixes: 6138f967bccc ("dmaengine: dmatest: Use fixed point div to calculate iops") Cc: Seraj Alijan <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-04-28Merge tag 'cve-2020-11884' from emailed bundleLinus Torvalds2-2/+18
Pull s390 fix from Christian Borntraeger: "Fix a race between page table upgrade and uaccess on s390. This fixes CVE-2020-11884 which allows for a local kernel crash or code execution" * tag 'cve-2020-11884' from emailed bundle: s390/mm: fix page table upgrade vs 2ndary address mode accesses
2020-04-28ALSA: hda/hdmi: fix race in monitor detection during probeKai Vehmanen1-0/+2
A race exists between build_pcms() and build_controls() phases of codec setup. Build_pcms() sets up notifier for jack events. If a monitor event is received before build_controls() is run, the initial jack state is lost and never reported via mixer controls. The problem can be hit at least with SOF as the controller driver. SOF calls snd_hda_codec_build_controls() in its workqueue-based probe and this can be delayed enough to hit the race condition. Fix the issue by invalidating the per-pin ELD information when build_controls() is called. The existing call to hdmi_present_sense() will update the ELD contents. This ensures initial monitor state is correctly reflected via mixer controls. BugLink: https://github.com/thesofproject/linux/issues/1687 Signed-off-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-28Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"Wolfram Sang1-15/+12
This reverts commit a900aeac253729411cf33c6cb598c152e9e4137f because regressions were showing up. Suggested-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/dmaengine/[email protected]/ Signed-off-by: Wolfram Sang <[email protected]>
2020-04-28Revert "i2c: tegra: Synchronize DMA before termination"Wolfram Sang1-9/+0
This reverts commit 8814044fe0fa182abc9ff818d3da562de98bc9a7 because regressions were showing up. Suggested-by: Thierry Reding <[email protected]> Link: https://lore.kernel.org/dmaengine/[email protected]/ Signed-off-by: Wolfram Sang <[email protected]>
2020-04-28i2c: iproc: generate stop event for slave writesRayagonda Kokatanur1-0/+3
When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP event to i2c_client. Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode") Signed-off-by: Rayagonda Kokatanur <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-04-28drm/qxl: qxl_release leak in qxl_hw_surface_alloc()Vasily Averin1-2/+3
Cc: [email protected] Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations") Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-28drm/qxl: qxl_release leak in qxl_draw_dirty_fb()Vasily Averin1-2/+3
ret should be changed to release allocated struct qxl_release Cc: [email protected] Fixes: 8002db6336dd ("qxl: convert qxl driver to proper use for reservations") Signed-off-by: Vasily Averin <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-28drm/virtio: only destroy created contextsGurchetan Singh1-11/+6
This can happen if userspace doesn't issue any 3D ioctls before closing the DRM fd. Fixes: 72b48ae800da ("drm/virtio: enqueue virtio_gpu_create_context after the first 3D ioctl") Signed-off-by: Gurchetan Singh <[email protected]> Link: http://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Gerd Hoffmann <[email protected]>
2020-04-27selinux: fix error return code in cond_read_list()Wei Yongjun1-1/+1
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 60abd3181db2 ("selinux: convert cond_list to array") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Ondrej Mosnacek <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2020-04-27Merge tag 'for-5.7-rc3-tag' of ↵Linus Torvalds4-11/+48
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - regression fixes: - transaction leak when deleting unused block group - log cleanup after transaction abort - fix block group leak when removing fails - transaction leak if relocation recovery fails - fix SPDX header * tag 'for-5.7-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix transaction leak in btrfs_recover_relocation btrfs: fix block group leak when removing fails btrfs: drop logs when we've aborted a transaction btrfs: fix memory leak of transaction when deleting unused block group btrfs: discard: Use the correct style for SPDX License Identifier
2020-04-27Merge tag 'hyperv-fixes-signed' of ↵Linus Torvalds6-20/+51
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V fixes from Wei Liu: - Two patches from Dexuan fixing suspension bugs - Three cleanup patches from Andy and Michael * tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: hyper-v: Remove internal types from UAPI header hyper-v: Use UUID API for exporting the GUID x86/hyperv: Suspend/resume the VP assist page for hibernation Drivers: hv: Move AEOI determination to architecture dependent code Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
2020-04-27drm/dp_mst: Fix drm_dp_send_dpcd_write() return codeLyude Paul1-2/+6
drm_dp_mst_wait_tx_reply() returns > 1 if time elapsed in wait_event_timeout() before check_txmsg_state(mgr, txmsg) evaluated to true. However, we make the mistake of returning this time from drm_dp_send_dpcd_write() on success instead of returning the number of bytes written - causing spontaneous failures during link probing: [drm:drm_dp_send_link_address [drm_kms_helper]] *ERROR* GUID check on 10:01 failed: 3975 Yikes! So, fix this by returning the number of bytes written on success instead. Signed-off-by: Lyude Paul <[email protected]> Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings") Cc: Benjamin Gaignard <[email protected]> Cc: Sean Paul <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-27drm/i915/gt: Check cacheline is valid before acquiringChris Wilson1-0/+2
The hwsp_cacheline pointer from i915_request is very, very flimsy. The i915_request.timeline (and the hwsp_cacheline) are lost upon retiring (after an RCU grace). Therefore we need to confirm that once we have the right pointer for the cacheline, it is not in the process of being retired and disposed of before we attempt to acquire a reference to the cacheline. <3>[ 547.208237] BUG: KASAN: use-after-free in active_debug_hint+0x6a/0x70 [i915] <3>[ 547.208366] Read of size 8 at addr ffff88822a0d2710 by task gem_exec_parall/2536 <4>[ 547.208547] CPU: 3 PID: 2536 Comm: gem_exec_parall Tainted: G U 5.7.0-rc2-ged7a286b5d02d-kasan_117+ #1 <4>[ 547.208556] Hardware name: Dell Inc. XPS 13 9350/, BIOS 1.4.12 11/30/2016 <4>[ 547.208564] Call Trace: <4>[ 547.208579] dump_stack+0x96/0xdb <4>[ 547.208707] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208719] print_address_description.constprop.6+0x16/0x310 <4>[ 547.208841] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208963] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.208975] __kasan_report+0x137/0x190 <4>[ 547.209106] ? active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209127] kasan_report+0x32/0x50 <4>[ 547.209257] ? i915_gemfs_fini+0x40/0x40 [i915] <4>[ 547.209376] active_debug_hint+0x6a/0x70 [i915] <4>[ 547.209389] debug_print_object+0xa7/0x220 <4>[ 547.209405] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.209426] debug_object_assert_init+0x297/0x430 <4>[ 547.209449] ? debug_object_free+0x360/0x360 <4>[ 547.209472] ? lock_acquire+0x1ac/0x8a0 <4>[ 547.209592] ? intel_timeline_read_hwsp+0x4f/0x840 [i915] <4>[ 547.209737] ? i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209861] i915_active_acquire_if_busy+0x66/0x120 [i915] <4>[ 547.209990] ? __live_alloc.isra.15+0xc0/0xc0 [i915] <4>[ 547.210005] ? rcu_read_lock_sched_held+0xd0/0xd0 <4>[ 547.210017] ? print_usage_bug+0x580/0x580 <4>[ 547.210153] intel_timeline_read_hwsp+0xbc/0x840 [i915] <4>[ 547.210284] __emit_semaphore_wait+0xd5/0x480 [i915] <4>[ 547.210415] ? i915_fence_get_timeline_name+0x110/0x110 [i915] <4>[ 547.210428] ? lockdep_hardirqs_on+0x348/0x5f0 <4>[ 547.210442] ? _raw_spin_unlock_irq+0x2a/0x40 <4>[ 547.210567] ? __await_execution.constprop.51+0x2e0/0x570 [i915] <4>[ 547.210706] i915_request_await_dma_fence+0x8f7/0xc70 [i915] Fixes: 85bedbf191e8 ("drm/i915/gt: Eliminate the trylock for reading a timeline's hwsp") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: <[email protected]> # v5.6+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2759e395358b2b909577928894f856ab75bea41a) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-27drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()Chris Wilson2-6/+24
While the ggtt vma are protected by their object lifetime, the list continues until it hits a non-ggtt vma, and that vma is not protected and may be freed as we inspect it. Hence, we require the obj->vma.lock to protect the list as we iterate. An example of forgetting to hold the obj->vma.lock is [1642834.464973] general protection fault, probably for non-canonical address 0xdead000000000122: 0000 [#1] SMP PTI [1642834.464977] CPU: 3 PID: 1954 Comm: Xorg Not tainted 5.6.0-300.fc32.x86_64 #1 [1642834.464979] Hardware name: LENOVO 20ARS25701/20ARS25701, BIOS GJET94WW (2.44 ) 09/14/2017 [1642834.465021] RIP: 0010:i915_gem_object_set_tiling+0x2c0/0x3e0 [i915] [1642834.465024] Code: 8b 84 24 18 01 00 00 f6 c4 80 74 59 49 8b 94 24 a0 00 00 00 49 8b 84 24 e0 00 00 00 49 8b 74 24 10 48 8b 92 30 01 00 00 89 c7 <80> ba 0a 06 00 00 03 0f 87 86 00 00 00 ba 00 00 08 00 b9 00 00 10 [1642834.465025] RSP: 0018:ffffa98780c77d60 EFLAGS: 00010282 [1642834.465028] RAX: ffff8d232bfb2578 RBX: 0000000000000002 RCX: ffff8d25873a0000 [1642834.465029] RDX: dead000000000122 RSI: fffff0af8ac6e408 RDI: 000000002bfb2578 [1642834.465030] RBP: ffff8d25873a0000 R08: ffff8d252bfb5638 R09: 0000000000000000 [1642834.465031] R10: 0000000000000000 R11: ffff8d252bfb5640 R12: ffffa987801cb8f8 [1642834.465032] R13: 0000000000001000 R14: ffff8d233e972e50 R15: ffff8d233e972d00 [1642834.465034] FS: 00007f6a3d327f00(0000) GS:ffff8d25926c0000(0000) knlGS:0000000000000000 [1642834.465036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1642834.465037] CR2: 00007f6a2064d000 CR3: 00000002fb57c001 CR4: 00000000001606e0 [1642834.465038] Call Trace: [1642834.465083] i915_gem_set_tiling_ioctl+0x122/0x230 [i915] [1642834.465121] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465151] drm_ioctl_kernel+0x86/0xd0 [drm] [1642834.465156] ? avc_has_perm+0x3b/0x160 [1642834.465178] drm_ioctl+0x206/0x390 [drm] [1642834.465216] ? i915_gem_object_set_tiling+0x3e0/0x3e0 [i915] [1642834.465221] ? selinux_file_ioctl+0x122/0x1c0 [1642834.465226] ? __do_munmap+0x24b/0x4d0 [1642834.465231] ksys_ioctl+0x82/0xc0 [1642834.465235] __x64_sys_ioctl+0x16/0x20 [1642834.465238] do_syscall_64+0x5b/0xf0 [1642834.465243] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1642834.465245] RIP: 0033:0x7f6a3d7b047b [1642834.465247] Code: 0f 1e fa 48 8b 05 1d aa 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ed a9 0c 00 f7 d8 64 89 01 48 [1642834.465249] RSP: 002b:00007ffe71adba28 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [1642834.465251] RAX: ffffffffffffffda RBX: 000055f99048fa40 RCX: 00007f6a3d7b047b [1642834.465253] RDX: 00007ffe71adba30 RSI: 00000000c0106461 RDI: 000000000000000e [1642834.465254] RBP: 0000000000000002 R08: 000055f98f3f1798 R09: 0000000000000002 [1642834.465255] R10: 0000000000001000 R11: 0000000000000246 R12: 0000000000000080 [1642834.465257] R13: 000055f98f3f1690 R14: 00000000c0106461 R15: 00007ffe71adba30 Now to take the spinlock during the list iteration, we need to break it down into two phases. In the first phase under the lock, we cannot sleep and so must defer the actual work to a second list, protected by the ggtt->mutex. We also need to hold the spinlock during creation of a new vma to serialise with updates of the tiling on the object. Reported-by: Dave Airlie <[email protected]> Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Dave Airlie <[email protected]> Cc: <[email protected]> # v5.5+ Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit cb593e5d2b6d3ad489669914d9fd1c64c7a4a6af) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-27drm/i915/selftests: Fix i915_address_space refcnt leakXiyu Yang1-4/+8
igt_ppgtt_pin_update() invokes i915_gem_context_get_vm_rcu(), which returns a reference of the i915_address_space object to "vm" with increased refcount. When igt_ppgtt_pin_update() returns, "vm" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in two exception handling paths of igt_ppgtt_pin_update(). When i915_gem_object_create_internal() returns IS_ERR, the refcnt increased by i915_gem_context_get_vm_rcu() is not decreased, causing a refcnt leak. Fix this issue by jumping to "out_vm" label when i915_gem_object_create_internal() returns IS_ERR. Fixes: a4e7ccdac38e ("drm/i915: Move context management under GEM") Signed-off-by: Xiyu Yang <[email protected]> Signed-off-by: Xin Tan <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e07c7606a00c4361bad72ff4e72ed0dfbefa23b0) Signed-off-by: Rodrigo Vivi <[email protected]>
2020-04-27io_uring: statx must grab the file table for valid fdJens Axboe1-2/+10
Clay reports that OP_STATX fails for a test case with a valid fd and empty path: -- Test 0: statx:fd 3: SUCCEED, file mode 100755 -- Test 1: statx:path ./uring_statx: SUCCEED, file mode 100755 -- Test 2: io_uring_statx:fd 3: FAIL, errno 9: Bad file descriptor -- Test 3: io_uring_statx:path ./uring_statx: SUCCEED, file mode 100755 This is due to statx not grabbing the process file table, hence we can't lookup the fd in async context. If the fd is valid, ensure that we grab the file table so we can grab the file from async context. Cc: [email protected] # v5.6 Reported-by: Clay Harris <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-04-27dmaengine: dmatest: Fix iteration non-stop logicAndy Shevchenko1-2/+2
Under some circumstances, i.e. when test is still running and about to time out and user runs, for example, grep -H . /sys/module/dmatest/parameters/* the iterations parameter is not respected and test is going on and on until user gives echo 0 > /sys/module/dmatest/parameters/run This is not what expected. The history of this bug is interesting. I though that the commit 2d88ce76eb98 ("dmatest: add a 'wait' parameter") is a culprit, but looking closer to the code I think it simple revealed the broken logic from the day one, i.e. in the commit 0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations") which adds iterations parameter. So, to the point, the conditional of checking the thread to be stopped being first part of conjunction logic prevents to check iterations. Thus, we have to always check both conditions to be able to stop after given iterations. Since it wasn't visible before second commit appeared, I add a respective Fixes tag. Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter") Cc: Dan Williams <[email protected]> Cc: Nicolas Ferre <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-04-27dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronizationDmitry Osipenko1-0/+9
DMA synchronization hook checks whether interrupt is raised by testing corresponding bit in a hardware status register, and thus, clock should be enabled in this case, otherwise CPU may hang if synchronization is invoked while Runtime PM is in suspended state. This patch resumes the RPM during of the DMA synchronization process in order to avoid potential problems. It is a minor clean up of a previous commit, no real problem is fixed by this patch because currently RPM is always in a resumed state while DMA is synchronized, although this may change in the future. Fixes: 6697255f239f ("dmaengine: tegra-apb: Improve DMA synchronization") Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-04-27dmaengine: fix channel index enumerationDave Jiang2-36/+28
When the channel register code was changed to allow hotplug operations, dynamic indexing wasn't taken into account. When channels are randomly plugged and unplugged out of order, the serial indexing breaks. Convert channel indexing to using IDA tracking in order to allow dynamic assignment. The previous code does not cause any regression bug for existing channel allocation besides idxd driver since the hotplug usage case is only used by idxd at this point. With this change, the chan->idr_ref is also not needed any longer. We can have a device with no channels registered due to hot plug. The channel device release code no longer should attempt to free the dma device id on the last channel release. Fixes: e81274cd6b52 ("dmaengine: add support to dynamic register/unregister of channels") Reported-by: Yixin Zhang <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Tested-by: Yixin Zhang <[email protected]> Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <[email protected]>
2020-04-27btrfs: transaction: Avoid deadlock due to bad initialization timing of ↵Qu Wenruo1-2/+11
fs_info::journal_info [BUG] One run of btrfs/063 triggered the following lockdep warning: ============================================ WARNING: possible recursive locking detected 5.6.0-rc7-custom+ #48 Not tainted -------------------------------------------- kworker/u24:0/7 is trying to acquire lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] but task is already holding lock: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(sb_internal#2); lock(sb_internal#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u24:0/7: #0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80 #1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80 #2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs] #3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs] stack backtrace: CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: btrfs-endio-write btrfs_work_helper [btrfs] Call Trace: dump_stack+0xc2/0x11a __lock_acquire.cold+0xce/0x214 lock_acquire+0xe6/0x210 __sb_start_write+0x14e/0x290 start_transaction+0x66c/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] find_free_extent+0x1504/0x1a50 [btrfs] btrfs_reserve_extent+0xd5/0x1f0 [btrfs] btrfs_alloc_tree_block+0x1ac/0x570 [btrfs] btrfs_copy_root+0x213/0x580 [btrfs] create_reloc_root+0x3bd/0x470 [btrfs] btrfs_init_reloc_root+0x2d2/0x310 [btrfs] record_root_in_trans+0x191/0x1d0 [btrfs] btrfs_record_root_in_trans+0x90/0xd0 [btrfs] start_transaction+0x16e/0x890 [btrfs] btrfs_join_transaction+0x1d/0x20 [btrfs] btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs] finish_ordered_fn+0x15/0x20 [btrfs] btrfs_work_helper+0x116/0x9a0 [btrfs] process_one_work+0x632/0xb80 worker_thread+0x80/0x690 kthread+0x1a3/0x1f0 ret_from_fork+0x27/0x50 It's pretty hard to reproduce, only one hit so far. [CAUSE] This is because we're calling btrfs_join_transaction() without re-using the current running one: btrfs_finish_ordered_io() |- btrfs_join_transaction() <<< Call #1 |- btrfs_record_root_in_trans() |- btrfs_reserve_extent() |- btrfs_join_transaction() <<< Call #2 Normally such btrfs_join_transaction() call should re-use the existing one, without trying to re-start a transaction. But the problem is, in btrfs_join_transaction() call #1, we call btrfs_record_root_in_trans() before initializing current::journal_info. And in btrfs_join_transaction() call #2, we're relying on current::journal_info to avoid such deadlock. [FIX] Call btrfs_record_root_in_trans() after we have initialized current::journal_info. CC: [email protected] # 4.4+ Signed-off-by: Qu Wenruo <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-04-27btrfs: fix partial loss of prealloc extent past i_size after fsyncFilipe Manana1-3/+40
When we have an inode with a prealloc extent that starts at an offset lower than the i_size and there is another prealloc extent that starts at an offset beyond i_size, we can end up losing part of the first prealloc extent (the part that starts at i_size) and have an implicit hole if we fsync the file and then have a power failure. Consider the following example with comments explaining how and why it happens. $ mkfs.btrfs -f /dev/sdb $ mount /dev/sdb /mnt # Create our test file with 2 consecutive prealloc extents, each with a # size of 128Kb, and covering the range from 0 to 256Kb, with a file # size of 0. $ xfs_io -f -c "falloc -k 0 128K" /mnt/foo $ xfs_io -c "falloc -k 128K 128K" /mnt/foo # Fsync the file to record both extents in the log tree. $ xfs_io -c "fsync" /mnt/foo # Now do a redudant extent allocation for the range from 0 to 64Kb. # This will merely increase the file size from 0 to 64Kb. Instead we # could also do a truncate to set the file size to 64Kb. $ xfs_io -c "falloc 0 64K" /mnt/foo # Fsync the file, so we update the inode item in the log tree with the # new file size (64Kb). This also ends up setting the number of bytes # for the first prealloc extent to 64Kb. This is done by the truncation # at btrfs_log_prealloc_extents(). # This means that if a power failure happens after this, a write into # the file range 64Kb to 128Kb will not use the prealloc extent and # will result in allocation of a new extent. $ xfs_io -c "fsync" /mnt/foo # Now set the file size to 256K with a truncate and then fsync the file. # Since no changes happened to the extents, the fsync only updates the # i_size in the inode item at the log tree. This results in an implicit # hole for the file range from 64Kb to 128Kb, something which fsck will # complain when not using the NO_HOLES feature if we replay the log # after a power failure. $ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo So instead of always truncating the log to the inode's current i_size at btrfs_log_prealloc_extents(), check first if there's a prealloc extent that starts at an offset lower than the i_size and with a length that crosses the i_size - if there is one, just make sure we truncate to a size that corresponds to the end offset of that prealloc extent, so that we don't lose the part of that extent that starts at i_size if a power failure happens. A test case for fstests follows soon. Fixes: 31d11b83b96f ("Btrfs: fix duplicate extents after fsync of file with prealloc extents") CC: [email protected] # 4.14+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-04-27nvme: prevent double free in nvme_alloc_ns() error handlingNiklas Cassel1-0/+2
When jumping to the out_put_disk label, we will call put_disk(), which will trigger a call to disk_release(), which calls blk_put_queue(). Later in the cleanup code, we do blk_cleanup_queue(), which will also call blk_put_queue(). Putting the queue twice is incorrect, and will generate a KASAN splat. Set the disk->queue pointer to NULL, before calling put_disk(), so that the first call to blk_put_queue() will not free the queue. The second call to blk_put_queue() uses another pointer to the same queue, so this call will still free the queue. Fixes: 85136c010285 ("lightnvm: simplify geometry enumeration") Signed-off-by: Niklas Cassel <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2020-04-27propagate_one(): mnt_set_mountpoint() needs mount_lockAl Viro1-5/+4
... to protect the modification of mp->m_count done by it. Most of the places that modify that thing also have namespace_lock held, but not all of them can do so, so we really need mount_lock here. Kudos to Piotr Krysiuk <[email protected]>, who'd spotted a related bug in pivot_root(2) (fixed unnoticed in 5.3); search for other similar turds has caught out this one. Cc: [email protected] Signed-off-by: Al Viro <[email protected]>
2020-04-27dma-buf: Fix SET_NAME ioctl uapiDaniel Vetter2-1/+8
The uapi is the same on 32 and 64 bit, but the number isn't. Everyone who botched this please re-read: https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html Also, the type argument for the ioctl macros is for the type the void __user *arg pointer points at, which in this case would be the variable-sized char[] of a 0 terminated string. So this was botched in more than just the usual ways. Cc: Sumit Semwal <[email protected]> Cc: Chenbo Feng <[email protected]> Cc: Greg Hackmann <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: Martin Liu <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Tested-by: Martin Liu <[email protected]> Reviewed-by: Martin Liu <[email protected]> Signed-off-by: Sumit Semwal <[email protected]> [sumits: updated some checkpatch fixes, corrected author email] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-04-27PM: ACPI: Output correct message on target power stateKai-Heng Feng1-2/+2
Transitioned power state logged at the end of setting ACPI power. However, D3cold won't be in the message because state can only be D3hot at most. Use target_state to corretly report when power state is D3cold. Cc: All applicable <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-27PM: hibernate: Freeze kernel threads in software_resume()Dexuan Cui1-0/+7
Currently the kernel threads are not frozen in software_resume(), so between dpm_suspend_start(PMSG_QUIESCE) and resume_target_kernel(), system_freezable_power_efficient_wq can still try to submit SCSI commands and this can cause a panic since the low level SCSI driver (e.g. hv_storvsc) has quiesced the SCSI adapter and can not accept any SCSI commands: https://lkml.org/lkml/2020/4/10/47 At first I posted a fix (https://lkml.org/lkml/2020/4/21/1318) trying to resolve the issue from hv_storvsc, but with the help of Bart Van Assche, I realized it's better to fix software_resume(), since this looks like a generic issue, not only pertaining to SCSI. Cc: All applicable <[email protected]> Signed-off-by: Dexuan Cui <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-27cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode onceChris Wilson1-1/+1
Make a note of the first time we discover the turbo mode has been disabled by the BIOS, as otherwise we complain every time we try to update the mode. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-04-27ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenterHui Wang1-0/+1
This new Lenovo ThinkCenter has two front mics which can't be handled by PA so far, so apply the fixup ALC283_FIXUP_HEADSET_MIC to change the location for one of the mics. Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-26Linux 5.7-rc3Linus Torvalds1-1/+1
2020-04-26Merge tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-18/+78
Pull cifs fixes from Steve French: "Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for stable and the others to fix a missing spinlock during reconnect" * tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix uninitialised lease_key in open_shroot() cifs: ensure correct super block for DFS reconnect cifs: do not share tcons with DFS cifs: minor update to comments around the cifs_tcp_ses_lock mutex cifs: protect updating server->dstaddr with a spinlock
2020-04-26Merge tag 'usb-5.7-rc3' of ↵Linus Torvalds29-121/+349
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 5.7-rc3. Nothing huge, just the usual collection of: - xhci fixes - gadget driver fixes - syzkaller fuzzing fixes - new device ids and DT bindings - new quirks added for broken devices A few of the gadget driver fixes show up twice here as they were applied to my branch, and also by Felipe to his branch which I then pulled in as we got out of sync a bit. All of these have been in linux-next with no reported issues" * tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: sisusbvga: Change port variable from signed to unsigned usb-storage: Add unusual_devs entry for JMicron JMS566 USB: hub: Revert commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices") USB: hub: Fix handling of connect changes during sleep usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer xhci: Don't clear hub TT buffer on ep0 protocol stall xhci: prevent bus suspend if a roothub port detected a over-current condition xhci: Fix handling halted endpoint even if endpoint ring appears empty usb: raw-gadget: Fix copy_to/from_user() checks usb: raw-gadget: fix raw_event_queue_fetch locking usb: gadget: udc: atmel: Fix vbus disconnect handling usb: dwc3: gadget: Fix request completion check USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE phy: tegra: Select USB_COMMON for usb_get_maximum_speed() usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset() cdc-acm: introduce a cool down cdc-acm: close race betrween suspend() and acm_softint UAS: fix deadlock in error handling and PM flushing work UAS: no use logging any details in case of ENODEV ...
2020-04-26Merge tag 'tty-5.7-rc3' of ↵Linus Torvalds9-189/+106
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 5.7-rc3. The "largest" in here are a number of reverts for previous changes to the uartps serial driver that turned out to not be a good idea at all. The others are just small fixes found by people and tools. Included in here is a much-reported symbol export needed by previous changes that happened in 5.7-rc1. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: hvc: fix buffer overflow during hvc_alloc(). tty: rocket, avoid OOB access tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart vt: don't hardcode the mem allocation upper bound tty: serial: owl: add "much needed" clk_prepare_enable() vt: don't use kmalloc() for the unicode screen buffer tty/sysrq: Export sysrq_mask(), sysrq_toggle_support() serial: sh-sci: Make sure status register SCxSR is read in correct sequence serial: sunhv: Initialize lock for non-registered console Revert "serial: uartps: Register own uart console and driver structures" Revert "serial: uartps: Move Port ID to device data structure" Revert "serial: uartps: Change uart ID port allocation" Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES" Revert "serial: uartps: Fix error path when alloc failed" Revert "serial: uartps: Use the same dynamic major number for all ports" Revert "serial: uartps: Fix uartps_major handling"
2020-04-26Merge tag 'char-misc-5.7-rc3' of ↵Linus Torvalds4-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are 4 small misc driver fixes for 5.7-rc3: - mei driver fix - interconnect driver fix - two fpga driver fixes All have been in linux-next with no reported issues" * tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: qcom: Fix uninitialized tcs_cmd::wait mei: me: fix irq number stored in hw struct fpga: dfl: pci: fix return value of cci_pci_sriov_configure fpga: zynq: Remove clk_get error message for probe defer
2020-04-26Merge tag 'staging-5.7-rc3' of ↵Linus Torvalds24-144/+429
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc3 Lots of tiny things for reported issues in staging and IIO drivers, including a counter driver fix as well (the iio drivers seem to be tied to those). Full details of the fixes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits) staging: vt6656: Fix calling conditions of vnt_set_bss_mode staging: comedi: Fix comedi_device refcnt leak in comedi_open staging: vt6656: Fix pairwise key entry save. staging: vt6656: Fix drivers TBTT timing counter. staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. MAINTAINERS: remove Stefan Popa's email iio: adc: ad7192: fix null pointer de-reference crash during probe iio: core: remove extra semi-colon from devm_iio_device_register() macro iio: adc: ti-ads8344: properly byte swap value iio: imu: inv_mpu6050: fix suspend/resume with runtime power iio: st_sensors: rely on odr mask to know if odr can be set iio: xilinx-xadc: Make sure not exceed maximum samplerate iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode iio: xilinx-xadc: Fix clearing interrupt when enabling trigger iio: xilinx-xadc: Fix ADC-B powerdown iio: dac: ad5770r: fix off-by-one check on maximum number of channels iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device iio: core: Fix handling of 'dB' dt-bindings: iio: adc: stm32-adc: fix id relative path counter: 104-quad-8: Add lock guards - generic interface ...
2020-04-26Merge tag 'driver-core-5.7-rc3' of ↵Linus Torvalds5-25/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small firmware/driver core/debugfs fixes for 5.7-rc3. The debugfs change is now possible as now the last users of debugfs_create_u32() have been fixed up in the different trees that got merged into 5.7-rc1, and I don't want it creeping back in. The firmware changes did cause a regression in linux-next, so the final patch here reverts part of that, re-exporting the symbol to resolve that issue. All of these patches, with the exception of the final one, have been in linux-next with only that one reported issue" * tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware_loader: revert removal of the fw_fallback_config export debugfs: remove return value of debugfs_create_u32() firmware_loader: remove unused exports firmware: imx: fix compile-testing
2020-04-26Merge tag 's390-5.7-3' of ↵Linus Torvalds6-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Add a few notrace annotations to avoid potential crashes when switching ftrace tracers. - Avoid setting affinity for floating irqs in pci code. - Fix build issue found by kbuild test robot. * tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/protvirt: fix compilation issue s390/pci: do not set affinity for floating irqs s390/ftrace: fix potential crashes when switching tracers
2020-04-26Merge tag 'powerpc-5.7-3' of ↵Linus Torvalds5-19/+24
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - One important fix for a bug in the way we find the cache-line size from the device tree, which was leading to the wrong size being reported to userspace on some platforms. - A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around leading to a window at boot when the strict mapping wasn't enforced. - A fix to enable our KUAP (kernel user access prevention) debugging on PPC32. - A build fix for clang in lib/mpi. Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai. * tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: lib/mpi: Fix building for powerpc with clang powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32 powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure powerpc/setup_64: Set cache-line-size based on cache-block-size
2020-04-26Merge tag 'devicetree-fixes-for-5.7-2' of ↵Linus Torvalds8-19/+32
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull more Devicetree fixes from Rob Herring: "A couple of schema and kbuild fixes" * tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: phy: qcom-qusb2: Fix defaults dt-bindings: Fix erroneous 'additionalProperties' dt-bindings: Fix command line length limit calling dt-mk-schema dt-bindings: Re-enable core schemas for dtbs_check
2020-04-26firmware_loader: revert removal of the fw_fallback_config exportLuis Chamberlain1-0/+1
Christoph's patch removed two unsused exported symbols, however, one symbol is used by the firmware_loader itself. If CONFIG_FW_LOADER=m so the firmware_loader is modular but CONFIG_FW_LOADER_USER_HELPER=y we fail the build at mostpost. ERROR: modpost: "fw_fallback_config" [drivers/base/firmware_loader/firmware_class.ko] undefined! This happens because the variable fw_fallback_config is built into the kernel if CONFIG_FW_LOADER_USER_HELPER=y always, so we need to grant access to the firmware loader module by exporting it. Revert only one hunk from his patch. Fixes: 739604734bd8 ("firmware_loader: remove unused exports") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Luis Chamberlain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-04-26ALSA: line6: Fix POD HD500 audio playbackVasily Khoruzhick1-17/+5
Apparently interface 1 is control interface akin to HD500X, setting LINE6_CAP_CONTROL and choosing it as ctrl_if fixes audio playback on POD HD500. Signed-off-by: Vasily Khoruzhick <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-04-25Merge branch 'for-linus' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull pid leak fix from Eric Biederman: "Oleg noticed that put_pid(thread_pid) was not getting called when proc was not compiled in. Let's get that fixed before 5.7 is released and causes problems for anyone" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: proc: Put thread_pid in release_task not proc_flush_pid
2020-04-25Merge tag 'timers-urgent-2020-04-25' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlet from Ingo Molnar: "A single fix for a comment that may show up in DocBook output" * tag 'timers-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: vdso/datapage: Use correct clock mode name in comment
Powered by cgit, Gruvboxed by Blaster4385.