| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Drop LM75 compatible devices which are already documented in lm75.yaml.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The correct vendor prefix for Analog Devices is "adi", not "ad". Both
forms are in use. Add the "adi,ad7414" version and deprecate the
"ad,ad7414" version.
Keep them together even though it breaks strict alphabetical ordering.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
"at,24c08" does not have a correct vendor prefix. The correct compatible
string would be "atmel,24c08" which is already documented in at24.yaml.
It is also unused anywhere, so just drop it.
"st,24c256" is already documented in at24.yaml, so drop it as well.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
commit 53ed3233e6b5 ("dt-bindings: input: qcom,pm8921-keypad: convert to
YAML format") resulted in a renaming of the output .txt file from
qcom,pm8xxx-keypad.txt to qcom,pm8921-keypad.yaml.
This patch makes a corresponding update to the link to that .txt file
in wakeup-source.txt.
Flagged by make htmldocs:
Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add compatible for pdc interrupt controller representing support on
SA8255p.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Nikunj Kela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The members "start" and "end" of struct resource are of type
"resource_size_t" which can be 32bit wide.
Values read from OF however are always 64bit wide.
Refactor the diff overflow checks into a helper function.
Also extend the checks to validate each calculation step.
Signed-off-by: Thomas Weißschuh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[robh: Fix to not return error on 0 sized resource]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Another batch of compatibles unlikely to ever be documented. It's
mostly old PowerMAC and PPC stuff found in DT compatible API calls.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Various DT and fwnode functions take a compatible string as a parameter.
These are often used in cases which don't have a driver, so they've been
missed.
The additional checks add about 400 more undocumented compatible
strings.
Link: https://lore.kernel.org/all/[email protected]/
Acked-by: Saravana Kannan <[email protected]>
Reviewed-by: Nícolas F. R. A. Prado <[email protected]>
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The members "start" and "end" of struct resource are of type
"resource_size_t" which can be 32bit wide.
Values read from OF however are always 64bit wide.
Avoid silently truncating the value and instead return an error value.
This can happen on real systems when the DT was created for a
PAE-enabled kernel and a non-PAE kernel is actually running.
For example with an arm defconfig and "qemu-system-arm -M virt".
Link: https://bugs.launchpad.net/qemu/+bug/1790975
Signed-off-by: Thomas Weißschuh <[email protected]>
Tested-by: Nam Cao <[email protected]>
Reviewed-by: Nam Cao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Filter out nodes that have one of its ancestors disabled as they aren't
expected to probe.
This removes the following false-positive failures on the
sc7180-trogdor-lazor-limozeen-nots-r5 platform:
/soc@0/geniqup@8c0000/i2c@894000/proximity@28
/soc@0/geniqup@ac0000/spi@a90000/ec@0
/soc@0/remoteproc@62400000/glink-edge/apr
/soc@0/remoteproc@62400000/glink-edge/apr/service@3
/soc@0/remoteproc@62400000/glink-edge/apr/service@4
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/clock-controller
/soc@0/remoteproc@62400000/glink-edge/apr/service@4/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@7
/soc@0/remoteproc@62400000/glink-edge/apr/service@7/dais
/soc@0/remoteproc@62400000/glink-edge/apr/service@8
/soc@0/remoteproc@62400000/glink-edge/apr/service@8/routing
/soc@0/remoteproc@62400000/glink-edge/fastrpc
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@3
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@4
/soc@0/remoteproc@62400000/glink-edge/fastrpc/compute-cb@5
/soc@0/spmi@c440000/pmic@0/pon@800/pwrkey
Fixes: 14571ab1ad21 ("kselftest: Add new test for detecting unprobed Devicetree devices")
Signed-off-by: Nícolas F. R. A. Prado <[email protected]>
Link: https://lore.kernel.org/r/20240729-dt-kselftest-parent-disabled-v2-1-d7a001c4930d@collabora.com
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
i.MX28 has an RX DMA channel associated with the LCDIF controller.
Document the 'dmas' and 'dma-names' properties to fix the following
dt-schema warnings:
lcdif@80030000: 'dma-names', 'dmas' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the NXP LPC18xx Watchdog Timer bindings to yaml format.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The PM6150 vibrator module is compatible with the PMI632 vibrator
module, document the PM6150 vibrator compatible as fallback for the
PMI632 vibrator.
Signed-off-by: Jens Reidel <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Replace two open-coded calculations of the buffer size by invocations of
sizeof() on the buffer itself, to make sure the code will always use the
actual buffer size.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/817c0b9626fd30790fc488c472a3398324cfcc0c.1724156125.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Pull in fixes to apply further refactoring.
|
|
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-6-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-5-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The "current-speed" property is not a common property for all GNSS
devices, but only to these connected with serial. Drop the property
from the common GNSS properties schema and instead reference common
serial properties schema (for children of UART controllers).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-4-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Some Bluetooth devices bindings are in net/ and some are in
net/bluetooth/, so bring some consistency by putting everything in
net/bluetooth. Rename few bindings to match preferred naming
style: "vendor,device".
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-3-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Properties should be defined in only one place, thus add new
serial-peripheral-props.yaml schema with definition of common properties
for UART-connected devices (children of UART controller): current-speed
and max-speed. The schema can be referenced by individual devices using
these properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-2-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. Add missing additionalProperties
for serial-attached devices.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-1-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
An 'msi-parent' property with a single entry and no accompanying
'#msi-cells' property is considered the legacy definition as opposed
to its definition after being expanded with commit 126b16e2ad98
("Docs: dt: add generic MSI bindings"). However, the legacy
definition is completely compatible with the current definition and,
since of_phandle_iterator_next() tolerates missing and present-but-
zero *cells properties since commit e42ee61017f5 ("of: Let
of_for_each_phandle fallback to non-negative cell_count"), there's no
need anymore to special case the legacy definition in
of_msi_get_domain().
Indeed, special casing has turned out to be harmful, because, as of
commit 7c025238b47a ("dt-bindings: irqchip: Describe the IMX MU block
as a MSI controller"), MSI controller DT bindings have started
specifying '#msi-cells' as a required property (even when the value
must be zero) as an effort to make the bindings more explicit. But,
since the special casing of 'msi-parent' only uses the existence of
'#msi-cells' for its heuristic, and not whether or not it's also
nonzero, the legacy path is not taken. Furthermore, the path to
support the new, broader definition isn't taken either since that
path has been restricted to the platform-msi bus.
But, neither the definition of 'msi-parent' nor the definition of
'#msi-cells' is platform-msi-specific (the platform-msi bus was just
the first bus that needed '#msi-cells'), so remove both the special
casing and the restriction. The code removal also requires changing
to of_parse_phandle_with_optional_args() in order to ensure the
legacy (but compatible) use of 'msi-parent' remains supported. This
not only simplifies the code but also resolves an issue with PCI
devices finding their MSI controllers on riscv, as the riscv,imsics
binding requires '#msi-cells=<0>'.
Signed-off-by: Andrew Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert dt-binding archs-pct from txt to yaml format.
Signed-off-by: Aryabhatta Dey <[email protected]>
Link: https://lore.kernel.org/r/emosjjbdwimwevrf2ew2dpn5sdx254el5fanhhquouu4bz6nbe@zqyp5ra7bmhh
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Replace additionalProperties with unevaluatedProperties because it ref to
panel-common.yaml.
Remove properties (backlight, enable-gpios and power-supply), which defined
in panel-common.yaml.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtb: panel-lvds: 'panel-timing' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc fsl-board.txt to yaml format. split to 3 part
fsl,bcsr.yaml, fsl,fpga-qixis.yaml, fsl,fpga-qixis-i2c.yaml
Additional change for fsl,fpga-qixis.yaml
- Add childnode mdio-mux-emi*
- Add compatible string fsl,ls1043aqds-fpga, fsl,ls1043ardb-fpga,
fsl,ls1046aqds-fpga, fsl,ls1046ardb-fpga, fsl,ls208xaqds-fpga,
fsl,ls1043ardb-cpld, fsl,ls1046ardb-cpld, fsl,ls1088aqds-fpga,
fsl,ls1088ardb-fpga, fsl,ls2080aqds-fpga, fsl,ls2080ardb-fpga.
- Change address to 32bit in example.
Additional change for fsl,fpga-qixis-i2c.yaml
- Add mux-controller
- Add compatible string fsl,ls1028aqds-fpga, fsl,lx2160aqds-fpga
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb: /soc/i2c@2000000/fpga@66: failed to match any schema with compatible: ['fsl,ls1028aqds-fpga', 'fsl,fpga-qixis-i2c', 'simple-mfd']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[robh: tweak mdio-mux node name, drop .dts change]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Some pending overlay additions need the graph check fix.
This adds the following commits from upstream:
bcd02b523429 fdtoverlay: remove wrong singular article in a comment
84b056a89d3c checks: relax graph checks for overlays
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The previous maintainers are no longer working on the Corstone-1000.
- Add new maintainers: Abdellatif El Khlifi, Hugues Kamba Mpiana
- Remove maintainers: Vishnu Banavath, Rui Miguel Silva
- Update contact information for existing maintainers
Signed-off-by: Hugues KAMBA MPIANA <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
When of_irq_parse_raw() is invoked with a device address smaller than
the interrupt parent node (from #address-cells property), KASAN detects
the following out-of-bounds read when populating the initial match table
(dyndbg="func of_irq_parse_* +p"):
OF: of_irq_parse_one: dev=/soc@0/picasso/watchdog, index=0
OF: parent=/soc@0/pci@878000000000/gpio0@17,0, intsize=2
OF: intspec=4
OF: of_irq_parse_raw: ipar=/soc@0/pci@878000000000/gpio0@17,0, size=2
OF: -> addrsize=3
==================================================================
BUG: KASAN: slab-out-of-bounds in of_irq_parse_raw+0x2b8/0x8d0
Read of size 4 at addr ffffff81beca5608 by task bash/764
CPU: 1 PID: 764 Comm: bash Tainted: G O 6.1.67-484c613561-nokia_sm_arm64 #1
Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.01-12.24.03-dirty 01/01/2023
Call trace:
dump_backtrace+0xdc/0x130
show_stack+0x1c/0x30
dump_stack_lvl+0x6c/0x84
print_report+0x150/0x448
kasan_report+0x98/0x140
__asan_load4+0x78/0xa0
of_irq_parse_raw+0x2b8/0x8d0
of_irq_parse_one+0x24c/0x270
parse_interrupts+0xc0/0x120
of_fwnode_add_links+0x100/0x2d0
fw_devlink_parse_fwtree+0x64/0xc0
device_add+0xb38/0xc30
of_device_add+0x64/0x90
of_platform_device_create_pdata+0xd0/0x170
of_platform_bus_create+0x244/0x600
of_platform_notify+0x1b0/0x254
blocking_notifier_call_chain+0x9c/0xd0
__of_changeset_entry_notify+0x1b8/0x230
__of_changeset_apply_notify+0x54/0xe4
of_overlay_fdt_apply+0xc04/0xd94
...
The buggy address belongs to the object at ffffff81beca5600
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 8 bytes inside of
128-byte region [ffffff81beca5600, ffffff81beca5680)
The buggy address belongs to the physical page:
page:00000000230d3d03 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1beca4
head:00000000230d3d03 order:1 compound_mapcount:0 compound_pincount:0
flags: 0x8000000000010200(slab|head|zone=2)
raw: 8000000000010200 0000000000000000 dead000000000122 ffffff810000c300
raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffff81beca5500: 04 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffffff81beca5600: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffffff81beca5680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffffff81beca5700: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc
==================================================================
OF: -> got it !
Prevent the out-of-bounds read by copying the device address into a
buffer of sufficient size.
Signed-off-by: Stefan Wiehler <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc maxim,ds26522.txt to yaml format.
Additional changes
- Remove spi-max-frequency because ref to
/schemas/spi/spi-peripheral-props.yaml
- Add address-cells and size-cells in example
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/spi@2100000/slic@2: failed to match any schema with compatible: ['maxim,ds26522']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Address warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: interrupt-controller@1e6c0080: 'valid-sources' does not match any of the regexes: 'pinctrl-[0-9]+'
and
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/copro-interrupt-controller@1e6c2000: failed to match any schema with compatible: ['aspeed,ast2400-cvic', 'aspeed-cvic']
Note that the conversion to DT schema causes some further warnings to
be emitted, because the Aspeed devicetrees are not in great shape. These
new warnings are resolved in a separate series:
https://lore.kernel.org/lkml/20240802-dt-warnings-bmc-dts-cleanups-v1-0-1cb1378e5fcd@codeconstruct.com.au/
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-2-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/interrupt-controller@1e6c0080: failed to match any schema with compatible: ['aspeed,ast2400-vic']
The YAML DT schema defines an optional property, valid-sources, which
was not previously described in the prose binding. It is added to
document existing practice in the Aspeed devicetrees. Unfortunately
the property seems to predate the requirement that vendor-specific
properties be prefixed.
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-1-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the NXP LPC3220 timer bindings to yaml format.
Add missing resets property as it is already being used in dts.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the Freescale FlexTimer Module (FTM) Timer bindings to yaml.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert txt bindings of TI's DaVinci/Keystone Watchdog Timer Controller
to dtschema to allow for validation.
While at it,
- Change the order of the compatibles.
- Add "power-domains" to represent that the power domain maybe managed by
TI-SCI controller if found on the SoC (for example, Keystone based K2G).
w.r.t. to the txt binding to stay in sync with existing DTS.
Signed-off-by: Kousik Sanagavarapu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert txt binding of TI's DaVinci timer to dtschema to allow for
validation.
While at it, change the file name to match the compatible.
Signed-off-by: Kousik Sanagavarapu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Drop the RCPM consumer example from the binding (LPUART device node),
because:
1. Using phandles is typical syntax, thus explaining it is not needed in
the provider binding,
2. It has 'fsl,rcpm-wakeup' property which is not allowed by LPUART
binding so it causes dt_binding_check warning:
fsl,rcpm.example.dtb: serial@2950000: Unevaluated properties are not allowed ('fsl,rcpm-wakeup' was unexpected)
from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
Alternatively, this property could be added to LPUART binding
(fsl-lpuart.yaml), but it looks like none of in-tree DTS use it.
Fixes: ad21e3840a88 ("dt-bindings: soc: fsl: Convert rcpm to yaml format")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Document the "isl,isl69260" compatible, which is already used in the
DTS files but was not previously documented in the bindings.
The ISL69260 is a digital dual output multiphase controller
that supports Intel VR13, VR13.HC, and VR14 specifications.
Signed-off-by: Peter Yin <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add compatible string, fsl,ls1088a-isc, fsl,ls2080a-isc, fsl,lx2160a-isc.
Fix the below warning:
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: /soc/syscon@1f70000: failed to match any schema with compatible: ['fsl,ls2080a-isc', 'syscon']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert dt-binding rcpm from txt to yaml format.
Add fsl,ls1028a-rcpm compatible string.
Additional changes:
- Add missed compatible string fsl,<chip>-rcpm.
- Remove map fsl,<chip>-rcpm to fsl,qoriq-rcpm-<version>.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Use of_property_present() to test for property presence rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The fujitsu,mb85rs256 is a 256 Kbit SPI memory FRAM in the same family
as the two existing fujitsu,mb85rs* compatibles and at25 compatible.
Signed-off-by: Francesco Dolcini <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Document TI TPS546D24 TPS546D24A 2.95-V to 16-V, 40-A, Up to 4x Stackable,
PMBus Buck Converter as trivial device. Linux kernel does have an existing
driver using the compatible documented here.
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the bindings for the External Bus Interface on apq8060 and
msm8660 from the old text format to yaml.
Signed-off-by: Rayyan Ansari <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Use my @kernel.org address everywhere.
Signed-off-by: Konrad Dybcio <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|