aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-04ARM: dts: stm32: fix pwr regulators references to use scmiEtienne Carriere3-0/+54
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR regulators through SCMI service. This is needed since enabling secure only access to RCC clock and reset controllers also enables secure access only on PWR voltage regulators reg11, reg18 and usb33 hence these must also be accessed through SCMI Voltage Domain protocol. This change applies on commit [2] that already corrects issues from commit [1]. Cc: Alexandre Torgue <[email protected]> Link: [1] https://lore.kernel.org/linux-arm-kernel/[email protected] Link: [2] https://lore.kernel.org/linux-arm-kernel/[email protected] Signed-off-by: Etienne Carriere <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2022-07-03Linux 5.19-rc5Linus Torvalds1-1/+1
2022-07-03lockref: remove unused 'lockref_get_or_lock()' functionLinus Torvalds2-26/+0
Looking at the conditional lock acquire functions in the kernel due to the new sparse support (see commit 4a557a5d1a61 "sparse: introduce conditional lock acquire function attribute"), it became obvious that the lockref code has a couple of them, but they don't match the usual naming convention for the other ones, and their return value logic is also reversed. In the other very similar places, the naming pattern is '*_and_lock()' (eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the function returns true when the lock is taken. The lockref code is superficially very similar to the refcount code, only with the special "atomic wrt the embedded lock" semantics. But instead of the '*_and_lock()' naming it uses '*_or_lock()'. And instead of returning true in case it took the lock, it returns true if it *didn't* take the lock. Now, arguably the reflock code is quite logical: it really is a "either decrement _or_ lock" kind of situation - and the return value is about whether the operation succeeded without any special care needed. So despite the similarities, the differences do make some sense, and maybe it's not worth trying to unify the different conditional locking primitives in this area. But while looking at this all, it did become obvious that the 'lockref_get_or_lock()' function hasn't actually had any users for almost a decade. The only user it ever had was the shortlived 'd_rcu_to_refcount()' function, and it got removed and replaced with 'lockref_get_not_dead()' back in 2013 in commits 0d98439ea3c6 ("vfs: use lockred 'dead' flag to mark unrecoverably dead dentries") and e5c832d55588 ("vfs: fix dentry RCU to refcounting possibly sleeping dput()") In fact, that single use was removed less than a week after the whole function was introduced in commit b3abd80250c1 ("lockref: add 'lockref_get_or_lock() helper") so this function has been around for a decade, but only had a user for six days. Let's just put this mis-designed and unused function out of its misery. We can think about the naming and semantic oddities of the remaining 'lockref_put_or_lock()' later, but at least that function has users. And while the naming is different and the return value doesn't match, that function matches the whole '{atomic,refcount}_dec_and_test()' pattern much better (ie the magic happens when the count goes down to zero, not when it is incremented from zero). Signed-off-by: Linus Torvalds <[email protected]>
2022-07-03Merge tag 'qcom-arm64-fixes-for-5.19' of ↵Arnd Bergmann8-9/+20
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DT fixes for v5.19 This removes duplicate includes in the sc7180-trogdor files, which accidentally ended up disabling nodes intended to be enabled. It corrects identifiers for CPU6/7 on MSM8994. On SM8450 the UFS node's interconnects property is updated to match the #interconnect-cells, avoiding sync_state issues and the GIC ITS is defined, to correct the references from the PCIe nodes. On SDM845 the display subsystem's AHB clock is corrected and on msm8992 devices, the supplies for lvs 1 and 2 are correctly specified. Lastly, a welcome addition of Konrad as reviewer for the Qualcomm SoC. * tag 'qcom-arm64-fixes-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo MAINTAINERS: Add myself as a reviewer for Qualcomm ARM/64 support arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node arm64: dts: qcom: sm8450 add ITS device tree node arm64: dts: qcom: msm8994: Fix CPU6/7 reg values arm64: dts: qcom: sm8450: fix interconnects property of UFS node arm64: dts: qcom: Remove duplicate sc7180-trogdor include on lazor/homestar Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-07-03sparse: introduce conditional lock acquire function attributeLinus Torvalds2-3/+5
The kernel tends to try to avoid conditional locking semantics because it makes it harder to think about and statically check locking rules, but we do have a few fundamental locking primitives that take locks conditionally - most obviously the 'trylock' functions. That has always been a problem for 'sparse' checking for locking imbalance, and we've had a special '__cond_lock()' macro that we've used to let sparse know how the locking works: # define __cond_lock(x,c) ((c) ? ({ __acquire(x); 1; }) : 0) so that you can then use this to tell sparse that (for example) the spinlock trylock macro ends up acquiring the lock when it succeeds, but not when it fails: #define raw_spin_trylock(lock) __cond_lock(lock, _raw_spin_trylock(lock)) and then sparse can follow along the locking rules when you have code like if (!spin_trylock(&dentry->d_lock)) return LRU_SKIP; .. sparse sees that the lock is held here.. spin_unlock(&dentry->d_lock); and sparse ends up happy about the lock contexts. However, this '__cond_lock()' use does result in very ugly header files, and requires you to basically wrap the real function with that macro that uses '__cond_lock'. Which has made PeterZ NAK things that try to fix sparse warnings over the years [1]. To solve this, there is now a very experimental patch to sparse that basically does the exact same thing as '__cond_lock()' did, but using a function attribute instead. That seems to make PeterZ happy [2]. Note that this does not replace existing use of '__cond_lock()', but only exposes the new proposed attribute and uses it for the previously unannotated 'refcount_dec_and_lock()' family of functions. For existing sparse installations, this will make no difference (a negative output context was ignored), but if you have the experimental sparse patch it will make sparse now understand code that uses those functions, the same way '__cond_lock()' makes sparse understand the very similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()' annotations. Note that in some cases this will silence existing context imbalance warnings. But in other cases it may end up exposing new sparse warnings for code that sparse just didn't see the locking for at all before. This is a trial, in other words. I'd expect that if it ends up being successful, and new sparse releases end up having this new attribute, we'll migrate the old-style '__cond_lock()' users to use the new-style '__cond_acquires' function attribute. The actual experimental sparse patch was posted in [3]. Link: https://lore.kernel.org/all/[email protected]/ [1] Link: https://lore.kernel.org/all/[email protected]/ [2] Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/ [3] Acked-by: Peter Zijlstra <[email protected]> Cc: Alexander Aring <[email protected]> Cc: Luc Van Oostenryck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-07-03Merge tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds14-131/+130
Pull xfs fixes from Darrick Wong: "This fixes some stalling problems and corrects the last of the problems (I hope) observed during testing of the new atomic xattr update feature. - Fix statfs blocking on background inode gc workers - Fix some broken inode lock assertion code - Fix xattr leaf buffer leaks when cancelling a deferred xattr update operation - Clean up xattr recovery to make it easier to understand. - Fix xattr leaf block verifiers tripping over empty blocks. - Remove complicated and error prone xattr leaf block bholding mess. - Fix a bug where an rt extent crossing EOF was treated as "posteof" blocks and cleaned unnecessarily. - Fix a UAF when log shutdown races with unmount" * tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent a UAF when log IO errors race with unmount xfs: dont treat rt extents beyond EOF as eofblocks to be cleared xfs: don't hold xattr leaf buffers across transaction rolls xfs: empty xattr leaf header blocks are not corruption xfs: clean up the end of xfs_attri_item_recover xfs: always free xattri_leaf_bp when cancelling a deferred op xfs: use invalidate_lock to check the state of mmap_lock xfs: factor out the common lock flags assert xfs: introduce xfs_inodegc_push() xfs: bound maximum wait time for inodegc work
2022-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller2-16/+41
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Insufficient validation of element datatype and length in nft_setelem_parse_data(). At least commit 7d7402642eaf updates maximum element data area up to 64 bytes when only 16 bytes where supported at the time. Support for larger element size came later in fdb9c405e35b though. Picking this older commit as Fixes: tag to be safe than sorry. 2) Memleak in pipapo destroy path, reproducible when transaction in aborted. This is already triggering in the existing netfilter test infrastructure since more recent new tests are covering this path. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-07-02netfilter: nft_set_pipapo: release elements in clone from abort pathPablo Neira Ayuso1-15/+33
New elements that reside in the clone are not released in case that the transaction is aborted. [16302.231754] ------------[ cut here ]------------ [16302.231756] WARNING: CPU: 0 PID: 100509 at net/netfilter/nf_tables_api.c:1864 nf_tables_chain_destroy+0x26/0x127 [nf_tables] [...] [16302.231882] CPU: 0 PID: 100509 Comm: nft Tainted: G W 5.19.0-rc3+ #155 [...] [16302.231887] RIP: 0010:nf_tables_chain_destroy+0x26/0x127 [nf_tables] [16302.231899] Code: f3 fe ff ff 41 55 41 54 55 53 48 8b 6f 10 48 89 fb 48 c7 c7 82 96 d9 a0 8b 55 50 48 8b 75 58 e8 de f5 92 e0 83 7d 50 00 74 09 <0f> 0b 5b 5d 41 5c 41 5d c3 4c 8b 65 00 48 8b 7d 08 49 39 fc 74 05 [...] [16302.231917] Call Trace: [16302.231919] <TASK> [16302.231921] __nf_tables_abort.cold+0x23/0x28 [nf_tables] [16302.231934] nf_tables_abort+0x30/0x50 [nf_tables] [16302.231946] nfnetlink_rcv_batch+0x41a/0x840 [nfnetlink] [16302.231952] ? __nla_validate_parse+0x48/0x190 [16302.231959] nfnetlink_rcv+0x110/0x129 [nfnetlink] [16302.231963] netlink_unicast+0x211/0x340 [16302.231969] netlink_sendmsg+0x21e/0x460 Add nft_set_pipapo_match_destroy() helper function to release the elements in the lookup tables. Stefano Brivio says: "We additionally look for elements pointers in the cloned matching data if priv->dirty is set, because that means that cloned data might point to additional elements we did not commit to the working copy yet (such as the abort path case, but perhaps not limited to it)." Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges") Reviewed-by: Stefano Brivio <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-07-02netfilter: nf_tables: stricter validation of element dataPablo Neira Ayuso1-1/+8
Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-07-02Merge tag 'nfsd-5.19-2' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable regression fixes: - Fix NFSD crash during NFSv4.2 READ_PLUS operation - Fix incorrect status code returned by COMMIT operation" * tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix READ_PLUS crasher NFSD: restore EINVAL error translation in nfsd_commit()
2022-07-02Merge tag 'for-5.19/parisc-4' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Two important fixes for bugs in code which was added in 5.18: - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO - Fix 32-bit load-word unalignment exception handler which returned wrong values" * tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix vDSO signal breakage on 32-bit kernel parisc/unaligned: Fix emulate_ldw() breakage
2022-07-02parisc: Fix vDSO signal breakage on 32-bit kernelHelge Deller1-0/+5
Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc signal testcases on a 32-bit kernel. The trampoline code (sigtramp.S) which is mapped into userspace includes an offset to the context data on the stack, which is used by gdb and glibc to get access to registers. In a 32-bit kernel we used by mistake the offset into the compat context (which is valid on a 64-bit kernel only) instead of the offset into the "native" 32-bit context. Reported-by: John David Anglin <[email protected]> Tested-by: John David Anglin <[email protected]> Fixes: df24e1783e6e ("parisc: Add vDSO support") CC: [email protected] # 5.18 Signed-off-by: Helge Deller <[email protected]>
2022-07-02Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of ↵Linus Torvalds9-17/+134
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - BPF program info linear (BPIL) data is accessed assuming 64-bit alignment resulting in undefined behavior as the data is just byte aligned. Fix it, Found using -fsanitize=undefined. - Fix 'perf offcpu' build on old kernels wrt task_struct's state/__state field. - Fix perf_event_attr.sample_type setting on the 'offcpu-time' event synthesized by the 'perf offcpu' tool. - Don't bail out when synthesizing PERF_RECORD_ events for pre-existing threads when one goes away while parsing its procfs entries. - Don't sort the task scan result from /proc, its not needed and introduces bugs when the main thread isn't the first one to be processed. - Fix uninitialized 'offset' variable on aarch64 in the unwind code. - Sync KVM headers with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf synthetic-events: Ignore dead threads during event synthesis perf synthetic-events: Don't sort the task scan result from /proc perf unwind: Fix unitialized 'offset' variable on aarch64 tools headers UAPI: Sync linux/kvm.h with the kernel sources perf bpf: 8 byte align bpil data tools kvm headers arm64: Update KVM headers from the kernel sources perf offcpu: Accept allowed sample types only perf offcpu: Fix build failure on old kernels
2022-07-02Merge tag 'powerpc-5.19-4' of ↵Linus Torvalds7-16/+52
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t. - Fix virt_addr_valid() when memory is hotplugged above the boot-time high_memory value. - Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly allocate a PMD page at PUD level. - Fix a couple of minor issues found since we enabled KASAN for 64-bit Book3S. Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao. * tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/memhotplug: Add add_pages override for PPC powerpc/bpf: Fix use of user_pt_regs in uapi powerpc/prom_init: Fix kernel config grep powerpc/book3e: Fix PUD allocation size in map_kernel_page() powerpc/xive/spapr: correct bitmap allocation size
2022-07-02MAINTAINERS: add Wenjia as SMC maintainerKarsten Graul1-0/+1
Add Wenjia as maintainer for Shared Memory Communications (SMC) Sockets. Acked-by: Wenjia Zhang <[email protected]> Acked-by: Alexandra Winter <[email protected]> Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-02misc: rtsx_usb: set return value in rsp_buf alloc err pathShuah Khan1-1/+3
Set return value in rsp_buf alloc error path before going to error handling. drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (!ucr->rsp_buf) ^~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here return ret; ^~~ drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false if (!ucr->rsp_buf) ^~~~~~~~~~~~~~~~~~ drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning int ret; ^ = 0 Fixes: 3776c7855985 ("misc: rtsx_usb: use separate command and response buffers") Reported-by: kernel test robot <[email protected]> Cc: stable <[email protected]> Signed-off-by: Shuah Khan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-07-02perf synthetic-events: Ignore dead threads during event synthesisNamhyung Kim1-2/+3
When it synthesize various task events, it scans the list of task first and then accesses later. There's a window threads can die between the two and proc entries may not be available. Instead of bailing out, we can ignore that thread and move on. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-07-02perf synthetic-events: Don't sort the task scan result from /procNamhyung Kim1-2/+2
It should not sort the result as procfs already returns a proper ordering of tasks. Actually sorting the order caused problems that it doesn't guararantee to process the main thread first. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-07-02perf unwind: Fix unitialized 'offset' variable on aarch64Ivan Babrou1-1/+1
Commit dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") uncovered the following issue on aarch64: util/unwind-libunwind-local.c: In function 'find_proc_info': util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 386 | if (ofs > 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 371 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] 363 | if (ofs <= 0) { | ^ util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here 199 | u64 address, offset; | ^~~~~~ In file included from util/libunwind/arm64.c:37: Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") Signed-off-by: Ivan Babrou <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Fangrui Song <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-07-01selftests/net: fix section name when using xdp_dummy.oHangbin Liu5-7/+7
Since commit 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") the xdp_dummy.o's section name has changed to xdp. But some tests are still using "section xdp_dummy", which make the tests failed. Fix them by updating to the new section name. Fixes: 8fffa0e3451a ("selftests/bpf: Normalize XDP section names in selftests") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-01Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski6-86/+193
Daniel Borkmann says: ==================== pull-request: bpf 2022-07-02 We've added 7 non-merge commits during the last 14 day(s) which contain a total of 6 files changed, 193 insertions(+), 86 deletions(-). The main changes are: 1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov. 2) Two verifier fixes around bounds data propagation, from Daniel Borkmann. 3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu. 4) General BPF maintainer entry revamp to better scale patch reviews. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf, selftests: Add verifier test case for jmp32's jeq/jne bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals bpf: Fix incorrect verifier simulation around jmp32's jeq/jne xsk: Clear page contiguity bit when unmapping pool bpf, docs: Better scale maintenance of BPF subsystem fprobe, samples: Add module parameter descriptions ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-01Merge tag 'libnvdimm-fixes-5.19-rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Vishal Verma: - Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver where accounting for poison blocks to be cleared was off by one, causing a failure to clear the the last badblock in an nvdimm region. * tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Fix badblocks clear off-by-one error
2022-07-01Merge tag 'amlogic-arm-for-v5.20' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes Amlogic ARM mach-meson changes for v5.20: - Fix refcount leak in meson_smp_prepare_cpus * tag 'amlogic-arm-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: meson: Fix refcount leak in meson_smp_prepare_cpus Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-07-01Merge tag 'scmi-fixes-5.19-2' of ↵Arnd Bergmann5-5/+38
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm SCMI firmware driver fixes for v5.19 Few more fixes to address: 1. Issue reported on Juno with HDLCD clock which turned out to be yet another firmware issue. The firmware is not conformant to the spec and we now have to workaround as this may be copied to other platforms as well. The spec expects to return size of 3 for a range clock rate description while the firmware returns 1. We have other ways to validate all the 3 entries the driver reads are polpulated and we use the same to workaround this firmware bug. 2. Optee transport not setting the correct reponse length which is similar to the one reported earlier on Rockchip platform. 3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the ida_{alloc,free} * tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API firmware: arm_scmi: Fix response size warning for OPTEE transport firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-07-01Merge tag 'thermal-5.19-rc5' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Add a new CPU ID to the list of supported processors in the intel_tcc_cooling driver (Sumeet Pawnikar)" * tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
2022-07-01bpf, selftests: Add verifier test case for jmp32's jeq/jneDaniel Borkmann1-0/+21
Add a test case to trigger the verifier's incorrect conclusion in the case of jmp32's jeq/jne. Also here, make use of dead code elimination, so that we can see the verifier bailing out on unfixed kernels. Before: # ./test_verifier 724 #724/p jeq32/jne32: bounds checking FAIL Failed to load prog 'Permission denied'! R4 !read_ok verification time 8 usec stack depth 0 processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0 Summary: 0 PASSED, 0 SKIPPED, 1 FAILED After: # ./test_verifier 724 #724/p jeq32/jne32: bounds checking OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-01bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalarDaniel Borkmann1-0/+22
Add a test case to trigger the constant scalar issue which leaves the register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make use of dead code elimination, so that we can see the verifier bailing out on unfixed kernels. For the condition, we use jle given it checks on umax bound. Before: # ./test_verifier 743 #743/p jump & dead code elimination FAIL Failed to load prog 'Permission denied'! R4 !read_ok verification time 11 usec stack depth 0 processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 Summary: 0 PASSED, 0 SKIPPED, 1 FAILED After: # ./test_verifier 743 #743/p jump & dead code elimination OK Summary: 1 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-01bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_valsDaniel Borkmann1-49/+23
Kuee reported a corner case where the tnum becomes constant after the call to __reg_bound_offset(), but the register's bounds are not, that is, its min bounds are still not equal to the register's max bounds. This in turn allows to leak pointers through turning a pointer register as is into an unknown scalar via adjust_ptr_min_max_vals(). Before: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has not been done at that point via __update_reg_bounds(), which would have improved the umax to be equal to umin. Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync() helper and use it consistently everywhere. After the fix, bounds have been corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register is regarded as a 'proper' constant scalar of 0. After: func#0 @0 0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) 1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) 2: (87) r3 = -r3 ; R3_w=scalar() 3: (87) r3 = -r3 ; R3_w=scalar() 4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881) 5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 6: (95) exit from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767) 8: (95) exit from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) 9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*] 10: (95) exit Fixes: b03c9f9fdc37 ("bpf/verifier: track signed and unsigned min/max values") Reported-by: Kuee K1r0a <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-01bpf: Fix incorrect verifier simulation around jmp32's jeq/jneDaniel Borkmann1-17/+24
Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the register value does not match expectations for the fall-through path. For example: Before fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*] 6: (95) exit R0 !read_ok After fix: 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r2 = 0 ; R2_w=P0 1: (b7) r6 = 563 ; R6_w=P563 2: (87) r2 = -r2 ; R2_w=Pscalar() 3: (87) r2 = -r2 ; R2_w=Pscalar() 4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563 5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*] 6: (95) exit R0 !read_ok As can be seen on line 5 for the branch fall-through path in R2 [*] is that given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as upper 32 bit are known to be zero. However, verifier incorrectly concludes that r2 = 571 which is far off. The problem is it only marks false{true}_reg as known in the switch for JE/NE case, but at the end of the function, it uses {false,true}_{64,32}off to update {false,true}_reg->var_off and they still hold the prior value of {false,true}_reg->var_off before it got marked as known. The subsequent __reg_combine_32_into_64() then propagates this old var_off and derives new bounds. The information between min/max bounds on {false,true}_reg from setting the register to known const combined with the {false,true}_reg->var_off based on the old information then derives wrong register data. Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant {false,true}_{64,32}off tnums along with the register marking to known constant. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Kuee K1r0a <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-01Merge tag 'pm-5.19-rc5' of ↵Linus Torvalds9-76/+111
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix some issues in cpufreq drivers and some issues in devfreq: - Fix error code path issues related PROBE_DEFER handling in devfreq (Christian Marangi) - Revert an editing accident in SPDX-License line in the devfreq passive governor (Lukas Bulwahn) - Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu devfreq driver (Miaoqian Lin) - Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang) - Fix missing of_node_put for qoriq and pmac32 driver (Liang He) - Fix issues around throttle interrupt for qcom driver (Stephen Boyd) - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del Regno) - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)" * tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / devfreq: passive: revert an editing accident in SPDX-License line PM / devfreq: Fix kernel warning with cpufreq passive register fail PM / devfreq: Rework freq_table to be local to devfreq struct PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER PM / devfreq: Mute warning on governor PROBE_DEFER PM / devfreq: Fix kernel panic with cpu based scaling to passive gov cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
2022-07-01Merge branch 'pm-cpufreq'Rafael J. Wysocki5-0/+36
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the following one: - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su). * pm-cpufreq: cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist cpufreq: pmac32-cpufreq: Fix refcount leak bug cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c cpufreq: amd-pstate: Add resume and suspend callbacks
2022-07-01Merge tag 'hwmon-for-v5.19-rc5' of ↵Linus Torvalds6-18/+24
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix error handling in ibmaem driver initialization - Fix bad data reported by occ driver after setting power cap - Fix typos in pmbus/ucd9200 driver comments * tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails hwmon: (pmbus/ucd9200) fix typos in comments hwmon: (occ) Prevent power cap command overwriting poll response
2022-07-01PM: runtime: Fix supplier device management during consumer probeRafael J. Wysocki2-13/+11
Because pm_runtime_get_suppliers() bumps up the rpm_active counter of each device link to a supplier of the given device in addition to bumping up the supplier's PM-runtime usage counter, a runtime suspend of the consumer device may case the latter to go down to 0 when pm_runtime_put_suppliers() is running on a remote CPU. If that happens after pm_runtime_put_suppliers() has released power.lock for the consumer device, and a runtime resume of that device takes place immediately after it, before pm_runtime_put() is called for the supplier, that pm_runtime_put() call may cause the supplier to be suspended even though the consumer is active. To prevent that from happening, modify pm_runtime_get_suppliers() to call pm_runtime_get_sync() for the given device's suppliers without touching the rpm_active counters of the involved device links Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put() for the given device's suppliers without looking at the rpm_active counters of the device links at hand. [This is analogous to what happened before commit 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance").] Since pm_runtime_get_suppliers() sets supplier_preactivated for each device link where the supplier's PM-runtime usage counter has been incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for the suppliers whose device links have supplier_preactivated set, the PM-runtime usage counter is balanced for each supplier and this is independent of the runtime suspend and resume of the consumer device. However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped during the consumer device probe, so pm_runtime_get_suppliers() bumps up the supplier's PM-runtime usage counter, but it cannot be dropped by pm_runtime_put_suppliers(), make device_link_release_fn() take care of that. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Reported-by: Peter Wang <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Reviewed-by: Peter Wang <[email protected]> Cc: 5.1+ <[email protected]> # 5.1+
2022-07-01PM: runtime: Redefine pm_runtime_release_supplier()Rafael J. Wysocki3-15/+13
Instead of passing an extra bool argument to pm_runtime_release_supplier(), make its callers take care of triggering a runtime-suspend of the supplier device as needed. No expected functional impact. Suggested-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Cc: 5.1+ <[email protected]> # 5.1+
2022-07-01hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() failsYang Yingliang1-4/+8
If platform_device_add() fails, it no need to call platform_device_del(), split platform_device_unregister() into platform_device_del/put(), so platform_device_put() can be called separately. Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]>
2022-07-01Merge tag 'arm64-fixes' of ↵Linus Torvalds1-9/+21
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Restore TLB invalidation for the 'break-before-make' rule on contiguous ptes (missed in a recent clean-up)" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes
2022-07-01Merge tag 's390-5.19-5' of ↵Linus Torvalds7-232/+18
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Alexander Gordeev: - Fix purgatory build process so bin2c tool does not get built unnecessarily and the Makefile is more consistent with other architectures. - Return earlier simple design of arch_get_random_seed_long|int() and arch_get_random_long|int() callbacks as result of changes in generic RNG code. - Fix minor comment typos and spelling mistakes. * tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/qdio: Fix spelling mistake s390/sclp: Fix typo in comments s390/archrandom: simplify back to earlier design and initialize earlier s390/purgatory: remove duplicated build rule of kexec-purgatory.o s390/purgatory: hard-code obj-y in Makefile s390: remove unneeded 'select BUILD_BIN2C'
2022-07-01Merge tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds2-6/+14
Pull NFS client fixes from Anna Schumaker: - Allocate a fattr for _nfs4_discover_trunking() - Fix module reference count leak in nfs4_run_state_manager() * tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4: Add an fattr allocation to _nfs4_discover_trunking() NFS: restore module put when manager exits.
2022-07-01Merge tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-clientLinus Torvalds1-0/+1
Pull ceph fix from Ilya Dryomov: "A ceph filesystem fix, marked for stable. There appears to be a deeper issue on the MDS side, but for now we are going with this one-liner to avoid busy looping and potential soft lockups" * tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client: ceph: wait on async create before checking caps for syncfs
2022-07-01Merge tag 'for-5.19/dm-fixes-5' of ↵Linus Torvalds2-17/+23
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Three fixes for invalid memory accesses discovered by using KASAN while running the lvm2 testsuite's dm-raid tests. Includes changes to MD's raid5.c given the dependency dm-raid has on the MD code" * tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm raid: fix KASAN warning in raid5_add_disks dm raid: fix KASAN warning in raid5_remove_disk dm raid: fix accesses beyond end of raid member array
2022-07-01Merge tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-blockLinus Torvalds2-8/+13
Pull io_uring fixes from Jens Axboe: "Two minor tweaks: - While we still can, adjust the send/recv based flags to be in ->ioprio rather than in ->addr2. This is consistent with eg accept, and also doesn't waste a full 64-bit field for flags (Pavel) - 5.18-stable fix for re-importing provided buffers. Not much real world relevance here as it'll only impact non-pollable files gone async, which is more of a practical test case rather than something that is used in the wild (Dylan)" * tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block: io_uring: fix provided buffer import io_uring: keep sendrecv flags in ioprio
2022-07-01Merge tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-blockLinus Torvalds11-30/+113
Pull block fixes from Jens Axboe: - Fix for batch getting of tags in sbitmap (wuchi) - NVMe pull request via Christoph: - More quirks (Lamarque Vieira Souza, Pablo Greco) - Fix a fabrics disconnect regression (Ruozhu Li) - Fix a nvmet-tcp data_digest calculation regression (Sagi Grimberg) - Fix nvme-tcp send failure handling (Sagi Grimberg) - Fix a regression with nvmet-loop and passthrough controllers (Alan Adamson) * tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block: nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1 nvmet: add a clear_ids attribute for passthru targets nvme: fix regression when disconnect a recovering ctrl nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G) nvme-tcp: always fail a request when sending it failed nvmet-tcp: fix regression in data_digest calculation lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()
2022-07-01Merge tag 'scsi-fixes' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "One simple driver fix for a dma overrun" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: hisi_sas: Limit max hw sectors for v3 HW
2022-07-01Merge tag 'ata-5.19-rc5' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ATA fix from Damien Le Moal: - Fix a compilation warning with some versions of gcc/sparse when compiling the pata_cs5535 driver, from John. * tag 'ata-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: ata: pata_cs5535: Fix W=1 warnings
2022-07-01arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptesWill Deacon1-9/+21
Commit fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()") removed TLB invalidation from get_clear_flush() [now get_clear_contig()] on the basis that the core TLB invalidation code is aware of hugetlb mappings backed by contiguous page-table entries and will cover the correct virtual address range. However, this change also resulted in the TLB invalidation being removed from the "break" step in the break-before-make (BBM) sequence used internally by huge_ptep_set_{access_flags,wrprotect}(), therefore making the BBM sequence unsafe irrespective of later invalidation. Although the architecture is desperately unclear about how exactly contiguous ptes should be updated in a live page-table, restore TLB invalidation to our BBM sequence under the assumption that BBM is the right thing to be doing in the first place. Fixes: fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()") Cc: Ard Biesheuvel <[email protected]> Cc: Steve Capper <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Mike Kravetz <[email protected]> Cc: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Reviewed-by: Anshuman Khandual <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-07-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two small fixes - Initialize a spinlock in the stm32 reset code - Add dt bindings to the clk maintainer filepattern" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK clk: stm32: rcc_reset: Fix missing spin_lock_init()
2022-07-01dmaengine: imx-sdma: only restart cyclic channel when enabledSascha Hauer1-1/+1
An interrupt for a channel might be pending even after struct dma_device::device_terminate_all has been called. In that case the recently introduced warning message "restart cyclic channel..." triggers and the channel will be restarted. This is not desired as the channel has just been stopped. Only restart the channel when we still have a descriptor set for it (which will be set to NULL in sdma_terminate_all()). Fixes: 5b215c28b9235 ("dmaengine: imx-sdma: restart cyclic channel if needed") Cc: [email protected] Signed-off-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2022-07-01xfs: prevent a UAF when log IO errors race with unmountDarrick J. Wong1-2/+7
KASAN reported the following use after free bug when running generic/475: XFS (dm-0): Mounting V5 Filesystem XFS (dm-0): Starting recovery (logdev: internal) XFS (dm-0): Ending recovery (logdev: internal) Buffer I/O error on dev dm-0, logical block 20639616, async page read Buffer I/O error on dev dm-0, logical block 20639617, async page read XFS (dm-0): log I/O error -5 XFS (dm-0): Filesystem has been shut down due to log error (0x2). XFS (dm-0): Unmounting Filesystem XFS (dm-0): Please unmount the filesystem and rectify the problem(s). ================================================================== BUG: KASAN: use-after-free in do_raw_spin_lock+0x246/0x270 Read of size 4 at addr ffff888109dd84c4 by task 3:1H/136 CPU: 3 PID: 136 Comm: 3:1H Not tainted 5.19.0-rc4-xfsx #rc4 8e53ab5ad0fddeb31cee5e7063ff9c361915a9c4 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Workqueue: xfs-log/dm-0 xlog_ioend_work [xfs] Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x2b8/0x661 ? do_raw_spin_lock+0x246/0x270 kasan_report+0xab/0x120 ? do_raw_spin_lock+0x246/0x270 do_raw_spin_lock+0x246/0x270 ? rwlock_bug.part.0+0x90/0x90 xlog_force_shutdown+0xf6/0x370 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318] xlog_ioend_work+0x100/0x190 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318] process_one_work+0x672/0x1040 worker_thread+0x59b/0xec0 ? __kthread_parkme+0xc6/0x1f0 ? process_one_work+0x1040/0x1040 ? process_one_work+0x1040/0x1040 kthread+0x29e/0x340 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 154099: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kmem_alloc+0x8d/0x2e0 [xfs] xlog_cil_init+0x1f/0x540 [xfs] xlog_alloc_log+0xd1e/0x1260 [xfs] xfs_log_mount+0xba/0x640 [xfs] xfs_mountfs+0xf2b/0x1d00 [xfs] xfs_fs_fill_super+0x10af/0x1910 [xfs] get_tree_bdev+0x383/0x670 vfs_get_tree+0x7d/0x240 path_mount+0xdb7/0x1890 __x64_sys_mount+0x1fa/0x270 do_syscall_64+0x2b/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 154151: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x110/0x190 slab_free_freelist_hook+0xab/0x180 kfree+0xbc/0x310 xlog_dealloc_log+0x1b/0x2b0 [xfs] xfs_unmountfs+0x119/0x200 [xfs] xfs_fs_put_super+0x6e/0x2e0 [xfs] generic_shutdown_super+0x12b/0x3a0 kill_block_super+0x95/0xd0 deactivate_locked_super+0x80/0x130 cleanup_mnt+0x329/0x4d0 task_work_run+0xc5/0x160 exit_to_user_mode_prepare+0xd4/0xe0 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x46/0xb0 This appears to be a race between the unmount process, which frees the CIL and waits for in-flight iclog IO; and the iclog IO completion. When generic/475 runs, it starts fsstress in the background, waits a few seconds, and substitutes a dm-error device to simulate a disk falling out of a machine. If the fsstress encounters EIO on a pure data write, it will exit but the filesystem will still be online. The next thing the test does is unmount the filesystem, which tries to clean the log, free the CIL, and wait for iclog IO completion. If an iclog was being written when the dm-error switch occurred, it can race with log unmounting as follows: Thread 1 Thread 2 xfs_log_unmount xfs_log_clean xfs_log_quiesce xlog_ioend_work <observe error> xlog_force_shutdown test_and_set_bit(XLOG_IOERROR) xfs_log_force <log is shut down, nop> xfs_log_umount_write <log is shut down, nop> xlog_dealloc_log xlog_cil_destroy <wait for iclogs> spin_lock(&log->l_cilp->xc_push_lock) <KABOOM> Therefore, free the CIL after waiting for the iclogs to complete. I /think/ this race has existed for quite a few years now, though I don't remember the ~2014 era logging code well enough to know if it was a real threat then or if the actual race was exposed only more recently. Fixes: ac983517ec59 ("xfs: don't sleep in xlog_cil_force_lsn on shutdown") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Dave Chinner <[email protected]>
2022-07-01irqchip/apple-aic: Make symbol 'use_fast_ipi' staticWei Yongjun1-1/+1
The sparse tool complains as follows: drivers/irqchip/irq-apple-aic.c:231:1: warning: symbol 'use_fast_ipi' was not declared. Should it be static? This symbol is not used outside of irq-apple-aic.c, so marks it static. Fixes: 2cf68211664a ("irqchip/apple-aic: Add Fast IPI support") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Hector Martin <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-07-01irqchip/xilinx: Add explicit dependency on OF_ADDRESSJamie Iles1-1/+1
Commit b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq dependency") relaxed the dependencies on the Xilinx interrupt controller to be OF only, but some OF architectures (s390 for example) do not support OF_ADDRESS and so a build of the driver will result in undefined references to of_iomap/iounmap and friends. Fixes: b84dc7f0e364 ("irqchip/xilinx: Remove microblaze+zynq dependency") Reported-by: kernel test robot <[email protected]> Signed-off-by: Jamie Iles <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.