aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-12ath11k: implement WoW enable and wakeup commandsCarl Huang7-1/+355
Implement wow enable ane wow wakeup commands which are needed for suspend. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: set credit_update flag for flow controlled ep onlyCarl Huang1-3/+5
Firmware will check all the pipes before entering WoW mode during suspend. If ATH11K_HTC_FLAG_NEED_CREDIT_UPDATE is set, firmware treats this pipe needed to return credit even though it's actually not required. If any pipe needs to return credit, the suspend_complete message doesn't send to host but is dropped. So host gets time out and WoW suspend failed. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: dp: stop rx pktlog before suspendCarl Huang4-0/+56
Stop dp rx pktlog when entering suspend and reap the mon_status buffer to keep it empty. During resume restart the reap timer. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: htc: implement suspend handlingCarl Huang4-2/+31
When ath11k sends suspend command to firmware, firmware will return suspend_complete events and add handlers for those. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: htc: remove unused struct ath11k_htc_opsKalle Valo1-6/+0
No need for it so remove. Compile tested only. Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: read select_window register to ensure write is finishedCarl Huang1-0/+1
Just when resume from WoW, the write to select_window doesn't take effect immediately, so read the register again to ensure the write operation is finished. Another change is to reset select_window to ZERO because this register isn't restored after WoW, so the content of this register becomes ZERO too. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: hif: implement suspend and resume functionsCarl Huang2-0/+38
For suspend support add suspend and resume to HIF layer. These ops are optional and, for example, AHB bus driver does not need to implement these. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: mhi: hook suspend and resumeCarl Huang2-0/+14
MHI suspend and resume isn't hooked in ath11k yet, so hook these functions needed for suspend support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: Fix incorrect tlvs in scan start commandPradeep Kumar Chitrapu1-31/+0
Currently 6G specific tlvs have duplicate entries which is causing scan failures. Fix this by removing the duplicate entries of the same tlv. This also fixes out-of-bound memory writes caused due to adding tlvs when num_hint_bssid and num_hint_s_ssid are ZEROs. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01386-QCAHKSWPL_SILICONZ-1 Fixes: 74601ecfef6e ("ath11k: Add support for 6g scan hint") Reported-by: Carl Huang <[email protected]> Signed-off-by: Pradeep Kumar Chitrapu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: disable VDD4BLOWCarl Huang2-0/+13
It's recommended to disable VDD4BLOW during initialisation. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: fix L1ss clock unstable problemCarl Huang2-0/+81
For QCA6390, one PCI related clock drifts sometimes, and it makes PCI link difficult to quit L1ss. Fix it by writing some registers which are known to fix the problem. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: pci: fix hot reset stability issuesCarl Huang2-5/+57
For QCA6390, host needs to reset some registers before MHI power up to fix PCI link unstable issue if hot reset happened. Also clear all pending interrupts during power up. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDIDCarl Huang4-13/+46
It's recommended to use wmi command WMI_PDEV_SET_HW_MODE_CMDID to put hardware to dbs mode instead of wmi_init command. This fixes a few strange stability issues. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: mhi: print a warning if firmware crashedKalle Valo1-0/+9
There was no way to detect if the firmware crashed so add a warning. At the moment the firmware is not restarted or anything like that, so when this happens ath11k modules need to be reloaded. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath11k: use MHI provided APIs to allocate and free MHI controllerBhaumik Bhatt1-3/+4
Use MHI provided APIs to allocate and free MHI controller to improve MHI host driver handling. This also fixes a memory leak as the MHI controller was allocated but never freed. Signed-off-by: Bhaumik Bhatt <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-12ath10k: add atomic protection for device recoveryWen Gong8-9/+25
When it has more than one restart_work queued meanwhile, the 2nd restart_work is very easy to break the 1st restart work and lead recovery fail. Add a flag to allow only one restart work running untill device successfully recovered. It already has flag ATH10K_FLAG_CRASH_FLUSH, but it can not use this flag again, because it is clear in ath10k_core_start. The function ieee80211_reconfig(called by ieee80211_restart_work) of mac80211 do many things and drv_start(call to ath10k_core_start) is 1st thing, when drv_start complete, it does not mean restart complete. So it add new flag and clear it in ath10k_reconfig_complete, because it is the last thing called from drv_reconfig_complete of function ieee80211_reconfig, after it, the restart process finished. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/010101746bead6a0-d5e97c66-dedd-4b92-810e-c2e4840fafc9-000000@us-west-2.amazonses.com
2020-12-12ath10k: add option for chip-id based BDF selectionAbhishek Kumar1-11/+32
In some devices difference in chip-id should be enough to pick the right BDF. Add another support for chip-id based BDF selection. With this new option, ath10k supports 2 fallback options. The board name with chip-id as option looks as follows board name 'bus=snoc,qmi-board-id=ff,qmi-chip-id=320' Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2-00696-QCAHLSWMTPL-1 Tested-on: QCA6174 HW3.2 WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: Abhishek Kumar <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Rakesh Pillai <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20201207231824.v3.1.Ia6b95087ca566f77423f3802a78b946f7b593ff5@changeid
2020-12-09ath9k_htc: adhere to the DONT_REORDER transmit flagMathy Vanhoef1-1/+6
Assure that frames with the fixed order flag are not reordered relative to each other. This is accomplished by transmitting them using a fixed priority independent of their QoS field. Signed-off-by: Mathy Vanhoef <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-09ath11k: mesh: add support for 256 bitmap in blockack frames in 11axPradeep Kumar Chitrapu1-14/+8
Currently 256 bitmap in blockack frames is being set only for AP mode. Fix this to set whenever beacon has changed and has HE capability, there by supporting mesh as well. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-09ath11k: support TXOP duration based RTS thresholdPradeep Kumar Chitrapu1-1/+17
HE operation IE in beacons is constructed based on userspace params, which firmware might not be aware of. This causes firmware not to configure TXOP duration based RTS threshold which could cause mismatch in behaviour with respect to what is being advertised in beacons. This patch sends HE operation IE fetched from beacon to firmware using WMI interface for configuration. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-09ath11k: fix incorrect wmi param for configuring HE operationPradeep Kumar Chitrapu1-1/+1
WMI_VDEV_PARAM_TX_OFDMA_CPLEN has been added with incorrect enum value. Fix the enum to represent WMI param for configuring HE operation field. This is applicable to firmwares under https://github.com/kvalo/ath11k-firmware/tree/master/IPQ8074/hw2.0 https://github.com/kvalo/ath11k-firmware/tree/master/IPQ6018/hw1.0 https://github.com/kvalo/ath11k-firmware/tree/master/QCN9074/hw1.0 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Pradeep Kumar Chitrapu <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-09ath11k: unlock on error path in ath11k_mac_op_add_interface()Dan Carpenter1-2/+2
These error paths need to drop the &ar->conf_mutex before returning. Fixes: 690ace20ff79 ("ath11k: peer delete synchronization with firmware") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/X85sVGVP/0XvlrEJ@mwanda
2020-12-09wcn36xx: Fix fall-through warnings for ClangGustavo A. R. Silva1-1/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by replacing a /* fall through */ comment with the new pseudo-keyword macro fallthrough; instead of letting the code fall through to the next case. Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/f932c887e013767cbdabfdddd671086e8ae63193.1605896060.git.gustavoars@kernel.org
2020-12-09carl9170: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/04257418814755f081fa0ac14a61b01328cdc4ed.1605896059.git.gustavoars@kernel.org
2020-12-09ath5k: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/e127232621c4de340509047a11d98093958303c5.1605896059.git.gustavoars@kernel.org
2020-12-09ath11k: fix rmmod failure if qmi sequence failsAnilkumar Kolli5-14/+46
QMI sequence fails if caldata file is not available. It is observed that 'rmmod ath11k' fails if qmi message fails. With this patch rmmod/insmod is working. Logs: Direct firmware load for IPQ8074/caldata.bin failed with error -2 Falling back to user helper qmi failed to load CAL: IPQ8074/caldata.bin qmi failed to load board data file:-11 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Anilkumar Kolli <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-08carl9170: remove trailing semicolon in macro definitionTom Rix1-2/+2
The macro use will already have a semicolon. Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-08ath11k: pci: add MODULE_FIRMWARE macrosDevin Bayer1-0/+5
I am trying to get the ath11k driver to work with VyOS and during the build it tries to discover the firmware blobs which drivers require. This doesn't work with ath11k because it doesn't use the MODULE_FIRMWARE macro. This patch fixes that. Signed-off-by: Devin Bayer <[email protected]> [[email protected]: cleanup commit log, move to pci.c] Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20201202182705.dhkml4nb4rf2vwav@orac
2020-12-07ath9k: remove trailing semicolon in macro definitionTom Rix2-2/+2
The macro use will already have a semicolon. Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-07ath11k: Ignore resetting peer auth flag in peer assoc cmdSeevalamuthu Mariappan1-3/+7
Incase of hardware encryption, WMI_PEER_AUTH flag will be set by firmware during install key. Since install key wont be done for software encryption mode, firmware will not set this flag. Due to this, seeing traffic failure in software encryption. Hence, avoid resetting peer auth flag if hardware encryption disabled. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01421-QCAHKSWPL_SILICONZ-1 Signed-off-by: Seevalamuthu Mariappan <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-07ath11k: add 64bit check before reading msi high addrAnilkumar Kolli2-2/+10
In QCN9074 ath11k boot, firmware crash is observed in 64-bit builds and is due to wrong 64 bit MSI address size. This patch fixes the firmware crash. Read msi high addr if 64-bit addresses allowed on MSI. Tested-On: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1.r1-00026-QCAHKSWPL_SILICONZ-2 Signed-off-by: Anilkumar Kolli <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-07ath10k: fix a check patch warning returnNonBoolInBooleanFunction of sdio.cWen Gong1-1/+1
cppcheck possible warnings: (new ones prefixed by >>, may not real problems) drivers/net/wireless/ath/ath10k/sdio.c:2234:2: warning: Non-boolean value returned from function returning bool [returnNonBoolInBooleanFunction] return param & HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW; Reported-by: kernel test robot <[email protected]> Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00049 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-12-06Merge branch 'mlxsw-Misc-updates'David S. Miller10-82/+129
Ido Schimmel says: ==================== mlxsw: Misc updates This patchset contains miscellaneous patches we gathered in our queue. Some of them are dependencies of larger patchsets that I will submit later this cycle. Patches #1-#3 perform small non-functional changes in mlxsw. Patch #4 adds more extended ack messages in mlxsw. Patch #5 adds devlink parameters documentation for mlxsw. To be extended with more parameters this cycle. Patches #6-#7 perform small changes in forwarding selftests infrastructure. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: spectrum_router: Reduce mlxsw_sp_ipip_fib_entry_op_gre4()Jiri Pirko4-56/+19
Turned out that mlxsw_sp_ipip_fib_entry_op_gre4() does not need to figure out the IP address and virtual router id. Those are exactly the same as in the fib_entry it is called for. So just use that and reduce mlxsw_sp_ipip_fib_entry_op_gre4() function to only call mlxsw_sp_ipip_fib_entry_op_gre4_rtdp() make the ipip decap op code similar to nve. Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: spectrum: Bump minimum FW version to xx.2008.2018Petr Machata1-3/+3
The indicated version fixes an issue whereby the MOMTE register would by default enable mirroring of ECN-marked traffic from all traffic classes, once the ECN mirroring was configured. This fix is necessary for offload of RED "ecn_mark" qevent. Signed-off-by: Petr Machata <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: core_acl: Use an array instead of a struct with a zero-length arrayIdo Schimmel1-15/+11
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/core_acl_flex_keys.c:139:3-7: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: spectrum_mr: Use flexible-array member instead of zero-length arrayIdo Schimmel1-1/+1
Suppresses the following coccinelle warning: drivers/net/ethernet/mellanox/mlxsw/spectrum_mr.c:18:15-19: WARNING use flexible-array member instead Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: core: Trace EMAD eventsIdo Schimmel1-0/+7
Currently, mlxsw triggers the 'devlink:devlink_hwmsg' tracepoint whenever a request is sent to the device and whenever a response is received from it. However, the tracepoint is not triggered when an event (e.g., port up / down) is received from the device. Also trace EMAD events in order to log a more complete picture of all the exchanged hardware messages. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06selftests: mlxsw: Test RIF's reference count when joining a LAGIdo Schimmel1-0/+43
Test that the reference count of a router interface (RIF) configured for a LAG is incremented / decremented when ports join / leave the LAG. Use the offload indication on routes configured on the RIF to understand if it was created / destroyed. The test fails without the previous patch. Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-06mlxsw: spectrum: Apply RIF configuration when joining a LAGIdo Schimmel3-7/+45
In case a router interface (RIF) is configured for a LAG, make sure its configuration is applied on the new LAG member. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-05Merge branch 'r8169-improve-rtl_rx-and-NUM_RX_DESC-handling'David S. Miller1-13/+8
Heiner Kallweit says: ==================== r8169: improve rtl_rx and NUM_RX_DESC handling This series improves rtl_rx() and the handling of NUM_RX_DESC. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-12-05r8169: make NUM_RX_DESC a signed intHeiner Kallweit1-3/+3
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-05r8169: improve rtl_rxHeiner Kallweit1-10/+5
There's no need to check min(budget, NUM_RX_DESC). At first budget (NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256). And more important: Even in case of budget > NUM_RX_DESC we could safely continue processing descriptors as long as they are owned by the CPU. In addition replace rx_left with a normal counter variable, this allows to simplify the code. Last but not least there's no need any longer to pass the budget as an u32. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-12-05net: fix spelling mistake "wil" -> "will" in KconfigColin Ian King1-1/+1
There is a spelling mistake in the Kconfig help text. Fix it. Signed-off-by: Colin Ian King <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-05Merge tag 'batadv-next-pullrequest-20201204' of ↵Jakub Kicinski44-4243/+121
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - update include for min/max helpers, by Sven Eckelmann - add infrastructure and netlink functions for routing algo selection, by Sven Eckelmann (2 patches) - drop deprecated debugfs and sysfs support and obsoleted functionality, by Sven Eckelmann (3 patches) - drop unused include in fragmentation.c, by Simon Wunderlich * tag 'batadv-next-pullrequest-20201204' of git://git.open-mesh.org/linux-merge: batman-adv: Drop unused soft-interface.h include in fragmentation.c batman-adv: Drop legacy code for auto deleting mesh interfaces batman-adv: Drop deprecated debugfs support batman-adv: Drop deprecated sysfs support batman-adv: Allow selection of routing algorithm over rtnetlink batman-adv: Prepare infrastructure for newlink settings batman-adv: Add new include for min/max helpers batman-adv: Start new development cycle ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-05enetc: Fix unused var build warning for CONFIG_OFArnd Bergmann1-11/+10
When CONFIG_OF is disabled, there is a harmless warning about an unused variable: enetc_pf.c: In function 'enetc_phylink_create': enetc_pf.c:981:17: error: unused variable 'dev' [-Werror=unused-variable] Slightly rearrange the code to pass around the of_node as a function argument, which avoids the problem without hurting readability. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Claudiu Manoil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-05ptp: Add clock driver for the OpenCompute TimeCard.Jonathan Lemon3-0/+413
The OpenCompute time card is an atomic clock along with a GPS receiver that provides a Grandmaster clock source for a PTP enabled network. More information is available at http://www.timingcard.com/ Signed-off-by: Jonathan Lemon <[email protected]> Acked-by: Richard Cochran <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-04net/nfc/nci: Support NCI 2.x initial sequenceBongsu Jeon4-16/+138
implement the NCI 2.x initial sequence to support NCI 2.x NFCC. Since NCI 2.0, CORE_RESET and CORE_INIT sequence have been changed. If NFCEE supports NCI 2.x, then NCI 2.x initial sequence will work. In NCI 1.0, Initial sequence and payloads are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status, NCI version, Configuration Status. CORE_INIT_CMD payloads are empty. CORE_INIT_RSP payloads are Status, NFCC Features, Number of Supported RF Interfaces, Supported RF Interface, Max Logical Connections, Max Routing table Size, Max Control Packet Payload Size, Max Size for Large Parameters, Manufacturer ID, Manufacturer Specific Information. In NCI 2.0, Initial Sequence and Parameters are as below: (DH) (NFCC) | -- CORE_RESET_CMD --> | | <-- CORE_RESET_RSP -- | | <-- CORE_RESET_NTF -- | | -- CORE_INIT_CMD --> | | <-- CORE_INIT_RSP -- | CORE_RESET_RSP payloads are Status. CORE_RESET_NTF payloads are Reset Trigger, Configuration Status, NCI Version, Manufacturer ID, Manufacturer Specific Information Length, Manufacturer Specific Information. CORE_INIT_CMD payloads are Feature1, Feature2. CORE_INIT_RSP payloads are Status, NFCC Features, Max Logical Connections, Max Routing Table Size, Max Control Packet Payload Size, Max Data Packet Payload Size of the Static HCI Connection, Number of Credits of the Static HCI Connection, Max NFC-V RF Frame Size, Number of Supported RF Interfaces, Supported RF Interfaces. Signed-off-by: Bongsu Jeon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-04selftests: forwarding: Add MPLS L2VPN testGuillaume Nault3-0/+196
Connect hosts H1 and H2 using two intermediate encapsulation routers (LER1 and LER2). These routers encapsulate traffic from the hosts, including the original Ethernet header, into MPLS. Use ping to test reachability between H1 and H2. Signed-off-by: Guillaume Nault <[email protected]> Link: https://lore.kernel.org/r/625f5c1aafa3a8085f8d3e082d680a82e16ffbaa.1606918980.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-12-04net: bna: remove trailing semicolon in macro definitionTom Rix1-9/+9
The macro use will already have a semicolon. Clean up escaped newlines. Signed-off-by: Tom Rix <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.