aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-01-24s390/module: fix loading modules with a lot of relocationsIlya Leoshkevich1-19/+18
If the size of the PLT entries generated by apply_rela() exceeds 64KiB, the first ones can no longer reach __jump_r1 with brc. Fix by using brcl. An alternative solution is to add a __jump_r1 copy after every 64KiB, however, the space savings are quite small and do not justify the additional complexity. Fixes: f19fbd5ed642 ("s390: introduce execute-trampolines for branches") Cc: [email protected] Reported-by: Andrea Righi <[email protected]> Signed-off-by: Ilya Leoshkevich <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Christian Borntraeger <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2022-01-24powerpc/perf: Fix power_pmu_disable to call clear_pmi_irq_pending only if ↵Athira Rajeev1-3/+14
PMI is pending Running selftest with CONFIG_PPC_IRQ_SOFT_MASK_DEBUG enabled in kernel triggered below warning: [ 172.851380] ------------[ cut here ]------------ [ 172.851391] WARNING: CPU: 8 PID: 2901 at arch/powerpc/include/asm/hw_irq.h:246 power_pmu_disable+0x270/0x280 [ 172.851402] Modules linked in: dm_mod bonding nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables rfkill nfnetlink sunrpc xfs libcrc32c pseries_rng xts vmx_crypto uio_pdrv_genirq uio sch_fq_codel ip_tables ext4 mbcache jbd2 sd_mod t10_pi sg ibmvscsi ibmveth scsi_transport_srp fuse [ 172.851442] CPU: 8 PID: 2901 Comm: lost_exception_ Not tainted 5.16.0-rc5-03218-g798527287598 #2 [ 172.851451] NIP: c00000000013d600 LR: c00000000013d5a4 CTR: c00000000013b180 [ 172.851458] REGS: c000000017687860 TRAP: 0700 Not tainted (5.16.0-rc5-03218-g798527287598) [ 172.851465] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 48004884 XER: 20040000 [ 172.851482] CFAR: c00000000013d5b4 IRQMASK: 1 [ 172.851482] GPR00: c00000000013d5a4 c000000017687b00 c000000002a10600 0000000000000004 [ 172.851482] GPR04: 0000000082004000 c0000008ba08f0a8 0000000000000000 00000008b7ed0000 [ 172.851482] GPR08: 00000000446194f6 0000000000008000 c00000000013b118 c000000000d58e68 [ 172.851482] GPR12: c00000000013d390 c00000001ec54a80 0000000000000000 0000000000000000 [ 172.851482] GPR16: 0000000000000000 0000000000000000 c000000015d5c708 c0000000025396d0 [ 172.851482] GPR20: 0000000000000000 0000000000000000 c00000000a3bbf40 0000000000000003 [ 172.851482] GPR24: 0000000000000000 c0000008ba097400 c0000000161e0d00 c00000000a3bb600 [ 172.851482] GPR28: c000000015d5c700 0000000000000001 0000000082384090 c0000008ba0020d8 [ 172.851549] NIP [c00000000013d600] power_pmu_disable+0x270/0x280 [ 172.851557] LR [c00000000013d5a4] power_pmu_disable+0x214/0x280 [ 172.851565] Call Trace: [ 172.851568] [c000000017687b00] [c00000000013d5a4] power_pmu_disable+0x214/0x280 (unreliable) [ 172.851579] [c000000017687b40] [c0000000003403ac] perf_pmu_disable+0x4c/0x60 [ 172.851588] [c000000017687b60] [c0000000003445e4] __perf_event_task_sched_out+0x1d4/0x660 [ 172.851596] [c000000017687c50] [c000000000d1175c] __schedule+0xbcc/0x12a0 [ 172.851602] [c000000017687d60] [c000000000d11ea8] schedule+0x78/0x140 [ 172.851608] [c000000017687d90] [c0000000001a8080] sys_sched_yield+0x20/0x40 [ 172.851615] [c000000017687db0] [c0000000000334dc] system_call_exception+0x18c/0x380 [ 172.851622] [c000000017687e10] [c00000000000c74c] system_call_common+0xec/0x268 The warning indicates that MSR_EE being set(interrupt enabled) when there was an overflown PMC detected. This could happen in power_pmu_disable since it runs under interrupt soft disable condition ( local_irq_save ) and not with interrupts hard disabled. commit 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") intended to clear PMI pending bit in Paca when disabling the PMU. It could happen that PMC gets overflown while code is in power_pmu_disable callback function. Hence add a check to see if PMI pending bit is set in Paca before clearing it via clear_pmi_pending. Fixes: 2c9ac51b850d ("powerpc/perf: Fix PMU callbacks to clear pending PMI before resetting an overflown PMC") Reported-by: Sachin Sant <[email protected]> Signed-off-by: Athira Rajeev <[email protected]> Tested-by: Sachin Sant <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-24powerpc/fixmap: Fix VM debug warning on unmapChristophe Leroy6-2/+18
Unmapping a fixmap entry is done by calling __set_fixmap() with FIXMAP_PAGE_CLEAR as flags. Today, powerpc __set_fixmap() calls map_kernel_page(). map_kernel_page() is not happy when called a second time for the same page. WARNING: CPU: 0 PID: 1 at arch/powerpc/mm/pgtable.c:194 set_pte_at+0xc/0x1e8 CPU: 0 PID: 1 Comm: swapper Not tainted 5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty #682 NIP: c0017cd4 LR: c00187f0 CTR: 00000010 REGS: e1011d50 TRAP: 0700 Not tainted (5.16.0-rc3-s3k-dev-01993-g350ff07feb7d-dirty) MSR: 00029032 <EE,ME,IR,DR,RI> CR: 42000208 XER: 00000000 GPR00: c0165fec e1011e10 c14c0000 c0ee2550 ff800000 c0f3d000 00000000 c001686c GPR08: 00001000 b00045a9 00000001 c0f58460 c0f50000 00000000 c0007e10 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 GPR24: 00000000 00000000 c0ee2550 00000000 c0f57000 00000ff8 00000000 ff800000 NIP [c0017cd4] set_pte_at+0xc/0x1e8 LR [c00187f0] map_kernel_page+0x9c/0x100 Call Trace: [e1011e10] [c0736c68] vsnprintf+0x358/0x6c8 (unreliable) [e1011e30] [c0165fec] __set_fixmap+0x30/0x44 [e1011e40] [c0c13bdc] early_iounmap+0x11c/0x170 [e1011e70] [c0c06cb0] ioremap_legacy_serial_console+0x88/0xc0 [e1011e90] [c0c03634] do_one_initcall+0x80/0x178 [e1011ef0] [c0c0385c] kernel_init_freeable+0xb4/0x250 [e1011f20] [c0007e34] kernel_init+0x24/0x140 [e1011f30] [c0016268] ret_from_kernel_thread+0x5c/0x64 Instruction dump: 7fe3fb78 48019689 80010014 7c630034 83e1000c 5463d97e 7c0803a6 38210010 4e800020 81250000 712a0001 41820008 <0fe00000> 9421ffe0 93e1001c 48000030 Implement unmap_kernel_page() which clears an existing pte. Reported-by: Maxime Bizon <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Tested-by: Maxime Bizon <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/b0b752f6f6ecc60653e873f385c6f0dce4e9ab6a.1638789098.git.christophe.leroy@csgroup.eu
2022-01-23hwmon: (adt7470) Prevent divide by zero in adt7470_fan_write()Dan Carpenter1-0/+3
The "val" variable is controlled by the user and comes from hwmon_attr_store(). The FAN_RPM_TO_PERIOD() macro divides by "val" so a zero will crash the system. Check for that and return -EINVAL. Negatives are also invalid so return -EINVAL for those too. Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (pmbus/ir38064) Mark ir38064_of_match as __maybe_unusedGuenter Roeck1-1/+1
If CONFIG_PM is not enabled, the following warning is reported. drivers/hwmon/pmbus/ir38064.c:54:34: warning: unused variable 'ir38064_of_match' Mark it as __maybe_unused. Reported-by: kernel test robot <[email protected]> Cc: Arthur Heymans <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Fix sysfs and udev notificationsGuenter Roeck1-6/+6
sysfs and udev notifications need to be sent to the _alarm attributes, not to the value attributes. Fixes: 94dbd23ed88c ("hwmon: (lm90) Use hwmon_notify_event()") Cc: Dmitry Osipenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6646/6647/6649Guenter Roeck1-1/+1
Experiments with MAX6646 and MAX6648 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6680Guenter Roeck1-1/+1
Experiments with MAX6680 and MAX6681 show that the alert function of those chips is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 4667bcb8d8fc ("hwmon: (lm90) Introduce chip parameter structure") Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Mark alert as broken for MAX6654Guenter Roeck1-0/+1
Experiments with MAX6654 show that its alert function is broken, similar to other chips supported by the lm90 driver. Mark it accordingly. Fixes: 229d495d8189 ("hwmon: (lm90) Add max6654 support to lm90 driver") Cc: Josh Lehan <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Re-enable interrupts after alert clearsGuenter Roeck1-1/+1
If alert handling is broken, interrupts are disabled after an alert and re-enabled after the alert clears. However, if there is an interrupt handler, this does not apply if alerts were originally disabled and enabled when the driver was loaded. In that case, interrupts will stay disabled after an alert was handled though the alert handler even after the alert condition clears. Address the situation by always re-enabling interrupts after the alert condition clears if there is an interrupt handler. Fixes: 2abdc357c55d9 ("hwmon: (lm90) Unmask hardware interrupt") Cc: Dmitry Osipenko <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23hwmon: (lm90) Reduce maximum conversion rate for G781Guenter Roeck1-1/+1
According to its datasheet, G781 supports a maximum conversion rate value of 8 (62.5 ms). However, chips labeled G781 and G780 were found to only support a maximum conversion rate value of 7 (125 ms). On the other side, chips labeled G781-1 and G784 were found to support a conversion rate value of 8. There is no known means to distinguish G780 from G781 or G784; all chips report the same manufacturer ID and chip revision. Setting the conversion rate register value to 8 on chips not supporting it causes unexpected behavior since the real conversion rate is set to 0 (16 seconds) if a value of 8 is written into the conversion rate register. Limit the conversion rate register value to 7 for all G78x chips to avoid the problem. Fixes: ae544f64cc7b ("hwmon: (lm90) Add support for GMT G781") Signed-off-by: Guenter Roeck <[email protected]>
2022-01-23Drivers: hv: balloon: account for vmbus packet header in max_pkt_sizeYanming Liu1-0/+7
Commit adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer") introduced a notion of maximum packet size in vmbus channel and used that size to initialize a buffer holding all incoming packet along with their vmbus packet header. hv_balloon uses the default maximum packet size VMBUS_DEFAULT_MAX_PKT_SIZE which matches its maximum message size, however vmbus_open expects this size to also include vmbus packet header. This leads to 4096 bytes dm_unballoon_request messages being truncated to 4080 bytes. When the driver tries to read next packet it starts from a wrong read_index, receives garbage and prints a lot of "Unhandled message: type: <garbage>" in dmesg. Allocate the buffer with HV_HYP_PAGE_SIZE more bytes to make room for the header. Fixes: adae1e931acd ("Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer") Suggested-by: Michael Kelley (LINUX) <[email protected]> Suggested-by: Andrea Parri (Microsoft) <[email protected]> Signed-off-by: Yanming Liu <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Reviewed-by: Andrea Parri (Microsoft) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-01-23x86/MCE/AMD: Allow thresholding interface updates after initYazen Ghannam1-1/+1
Changes to the AMD Thresholding sysfs code prevents sysfs writes from updating the underlying registers once CPU init is completed, i.e. "threshold_banks" is set. Allow the registers to be updated if the thresholding interface is already initialized or if in the init path. Use the "set_lvt_off" value to indicate if running in the init path, since this value is only set during init. Fixes: a037f3ca0ea0 ("x86/mce/amd: Make threshold bank setting hotplug robust") Signed-off-by: Yazen Ghannam <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-23block: fix memory leak in disk_register_independent_access_rangesMiaoqian Lin1-1/+1
kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly. Fixes: a2247f19ee1c ("block: Add independent access ranges support") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-01-23io_uring: fix bug in slow unregistering of nodesDylan Yudaken1-1/+6
In some cases io_rsrc_ref_quiesce will call io_rsrc_node_switch_start, and then immediately flush the delayed work queue &ctx->rsrc_put_work. However the percpu_ref_put does not immediately destroy the node, it will be called asynchronously via RCU. That ends up with io_rsrc_node_ref_zero only being called after rsrc_put_work has been flushed, and so the process ends up sleeping for 1 second unnecessarily. This patch executes the put code immediately if we are busy quiescing. Fixes: 4a38aed2a0a7 ("io_uring: batch reap of dead file registrations") Signed-off-by: Dylan Yudaken <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-01-23Merge tag 'powerpc-5.17-2' of ↵Linus Torvalds16-87/+131
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A series of bpf fixes, including an oops fix and some codegen fixes. - Fix a regression in syscall_get_arch() for compat processes. - Fix boot failure on some 32-bit systems with KASAN enabled. - A couple of other build/minor fixes. Thanks to Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa, Johan Almbladh, Maxime Bizon, Naveen N. Rao, and Nicholas Piggin. * tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Mask SRR0 before checking against the masked NIP powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64 powerpc/32s: Fix kasan_init_region() for KASAN powerpc/time: Fix build failure due to do_hard_irq_enable() on PPC32 powerpc/audit: Fix syscall_get_arch() powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06 tools/bpf: Rename 'struct event' to avoid naming conflict powerpc/bpf: Update ldimm64 instructions during extra pass powerpc32/bpf: Fix codegen for bpf-to-bpf calls bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()
2022-01-23Merge tag 'irq_urgent_for_v5.17_rc2' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: "A single use-after-free fix in the PCI MSI irq domain allocation path" * tag 'irq_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Prevent UAF in error path
2022-01-23Merge tag 'sched_urgent_for_v5.17_rc2' of ↵Linus Torvalds10-103/+125
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: "A bunch of fixes: forced idle time accounting, utilization values propagation in the sched hierarchies and other minor cleanups and improvements" * tag 'sched_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/sched: Remove dl_boosted flag comment sched: Avoid double preemption in __cond_resched_*lock*() sched/fair: Fix all kernel-doc warnings sched/core: Accounting forceidle time for all tasks except idle task sched/pelt: Relax the sync of load_sum with load_avg sched/pelt: Relax the sync of runnable_sum with runnable_avg sched/pelt: Continue to relax the sync of util_sum with util_avg sched/pelt: Relax the sync of util_sum with util_avg psi: Fix uaf issue when psi trigger is destroyed while being polled
2022-01-23Merge tag 'perf_urgent_for_v5.17_rc2' of ↵Linus Torvalds12-189/+501
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Add support for accessing the general purpose counters on Alder Lake via MMIO - Add new LBR format v7 support which is v5 modulo TSX - Fix counter enumeration on Alder Lake hybrids - Overhaul how context time updates are done and get rid of perf_event::shadow_ctx_time. - The usual amount of fixes: event mask correction, supported event types reporting, etc. * tag 'perf_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/perf: Avoid warning for Arch LBR without XSAVE perf/x86/intel/uncore: Add IMC uncore support for ADL perf/x86/intel/lbr: Add static_branch for LBR INFO flags perf/x86/intel/lbr: Support LBR format V7 perf/x86/rapl: fix AMD event handling perf/x86/intel/uncore: Fix CAS_COUNT_WRITE issue for ICX perf/x86/intel: Add a quirk for the calculation of the number of counters on Alder Lake perf: Fix perf_event_read_local() time
2022-01-23efi: runtime: avoid EFIv2 runtime services on Apple x86 machinesArd Biesheuvel1-0/+7
Aditya reports [0] that his recent MacbookPro crashes in the firmware when using the variable services at runtime. The culprit appears to be a call to QueryVariableInfo(), which we did not use to call on Apple x86 machines in the past as they only upgraded from EFI v1.10 to EFI v2.40 firmware fairly recently, and QueryVariableInfo() (along with UpdateCapsule() et al) was added in EFI v2.00. The only runtime service introduced in EFI v2.00 that we actually use in Linux is QueryVariableInfo(), as the capsule based ones are optional, generally not used at runtime (all the LVFS/fwupd firmware update infrastructure uses helper EFI programs that invoke capsule update at boot time, not runtime), and not implemented by Apple machines in the first place. QueryVariableInfo() is used to 'safely' set variables, i.e., only when there is enough space. This prevents machines with buggy firmwares from corrupting their NVRAMs when they run out of space. Given that Apple machines have been using EFI v1.10 services only for the longest time (the EFI v2.0 spec was released in 2006, and Linux support for the newly introduced runtime services was added in 2011, but the MacbookPro12,1 released in 2015 still claims to be EFI v1.10 only), let's avoid the EFI v2.0 ones on all Apple x86 machines. [0] https://lore.kernel.org/all/[email protected]/ Cc: <[email protected]> Cc: Jeremy Kerr <[email protected]> Cc: Matthew Garrett <[email protected]> Reported-by: Aditya Garg <[email protected]> Tested-by: Orlando Chamberlain <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> Tested-by: Aditya Garg <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215277
2022-01-23efi/libstub: arm64: Fix image check alignment at entryMihai Carabas1-3/+3
The kernel is aligned at SEGMENT_SIZE and this is the size populated in the PE headers: arch/arm64/kernel/efi-header.S: .long SEGMENT_ALIGN // SectionAlignment EFI_KIMG_ALIGN is defined as: (SEGMENT_ALIGN > THREAD_ALIGN ? SEGMENT_ALIGN : THREAD_ALIGN) So it depends on THREAD_ALIGN. On newer builds this message started to appear even though the loader is taking into account the PE header (which is stating SEGMENT_ALIGN). Fixes: c32ac11da3f8 ("efi/libstub: arm64: Double check image alignment at entry") Signed-off-by: Mihai Carabas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2022-01-23s390/uaccess: fix compile errorHeiko Carstens1-2/+2
Compiling with e.g MARCH=z900 results in compile errors: arch/s390/lib/uaccess.c: In function 'copy_from_user_mvcos': >> arch/s390/lib/uaccess.c:65:15: error: variable 'spec' has initializer but incomplete type 65 | union oac spec = { Therefore make definition of union oac visible for all MARCHs. Reported-by: kernel test robot <[email protected]> Cc: Nico Boehr <[email protected]> Cc: Janis Schoetterl-Glausch <[email protected]> Fixes: 012a224e1fa3 ("s390/uaccess: introduce bit field for OAC specifier") Signed-off-by: Heiko Carstens <[email protected]>
2022-01-23s390/nmi: handle vector validity failures for KVM guestsChristian Borntraeger1-1/+8
The machine check validity bit tells about the context. If a KVM guest was running the bit tells about the guest validity and the host state is not affected. As a guest can disable the guest validity this might result in unwanted host errors on machine checks. Cc: [email protected] Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Signed-off-by: Christian Borntraeger <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2022-01-23s390/nmi: handle guarded storage validity failures for KVM guestsChristian Borntraeger1-4/+14
machine check validity bits reflect the state of the machine check. If a guest does not make use of guarded storage, the validity bit might be off. We can not use the host CR bit to decide if the validity bit must be on. So ignore "invalid" guarded storage controls for KVM guests in the host and rely on the machine check being forwarded to the guest. If no other errors happen from a host perspective everything is fine and no process must be killed and the host can continue to run. Cc: [email protected] Fixes: c929500d7a5a ("s390/nmi: s390: New low level handling for machine check happening in guest") Reported-by: Carsten Otte <[email protected]> Signed-off-by: Christian Borntraeger <[email protected]> Tested-by: Carsten Otte <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2022-01-23Linux 5.17-rc1Linus Torvalds1-2/+2
2022-01-23Merge tag 'perf-tools-for-v5.17-2022-01-22' of ↵Linus Torvalds51-149/+354
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
2022-01-23Merge tag 'trace-v5.17-3' of ↵Linus Torvalds2-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
2022-01-23ftrace: Fix assuming build time sort works for s390Steven Rostedt (Google)2-3/+10
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/[email protected]/ Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by: Sven Schnelle <[email protected]> Tested-by: Heiko Carstens <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-01-23Merge tag 'kbuild-fixes-v5.17' of ↵Linus Torvalds3-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds73-438/+635
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-22perf tools: Remove redundant err variableMinghao Chi1-4/+1
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Minghao Chi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: CGEL ZTE <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf test: Add parse-events test for aliases with hyphensJohn Garry2-9/+82
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by: John Garry <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Qi Liu <[email protected]> Cc: Shaokun Zhang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf test: Add pmu-events test for aliases with hyphensJohn Garry2-0/+48
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by: John Garry <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Qi Liu <[email protected]> Cc: Shaokun Zhang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf parse-events: Support event alias in form foo-bar-bazJohn Garry4-4/+41
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: John Garry <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Qi Liu <[email protected]> Cc: Shaokun Zhang <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf evsel: Override attr->sample_period for non-libpfm4 eventsGerman Gomez1-8/+17
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8abe31 (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by: Chase Conklin <[email protected]> Signed-off-by: German Gomez <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Fastabend <[email protected]> Cc: KP Singh <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Yonghong Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf cpumap: Remove duplicate include in cpumap.hLv Ruyi1-1/+0
Remove all but the first include of stdbool.h from cpumap.h. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Lv Ruyi <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: CGEL ZTE <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf cpumap: Migrate to libperf cpumap apiIan Rogers31-87/+99
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Bayduraev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Andrew Morton <[email protected]> Cc: André Almeida <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: German Gomez <[email protected]> Cc: James Clark <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Miaoqian Lin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Stephen Brennan <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yury Norov <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf python: Fix cpu_map__item() buildingIan Rogers1-3/+3
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Bayduraev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: André Almeida <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Andy Shevchenko <[email protected]> Cc: Darren Hart <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Dmitriy Vyukov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: German Gomez <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Kan Liang <[email protected]> Cc: Leo Yan <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Miaoqian Lin <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Shunsuke Nakamura <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Stephen Brennan <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Yury Norov <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22perf script: Fix printing 'phys_addr' failure issueYao Jin1-1/+1
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by: German Gomez <[email protected]> Signed-off-by: Yao Jin <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Hanjun Guo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Wei Li <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-01-22irqchip/gic-v3-its: Fix build for !SMPArd Biesheuvel1-1/+2
Commit 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") added a reference to cpus_booted_once_mask, which does not exist on !SMP builds, breaking the build for such configurations. Given the intent of the check, short circuit it to always pass. Cc: Valentin Schneider <[email protected]> Fixes: 835f442fdbce ("irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime") Signed-off-by: Ard Biesheuvel <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-01-23certs: Fix build error when CONFIG_MODULE_SIG_KEY is emptyMasahiro Yamada1-1/+1
Since b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/[email protected]/T/#u Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by: Michal Kubecek <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]> Tested-by: Michal Kubecek <[email protected]>
2022-01-23certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URIMasahiro Yamada1-1/+1
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b466c ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by: Masahiro Yamada <[email protected]>
2022-01-23Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH"Masahiro Yamada1-1/+1
This reverts commit cd8c917a56f20f48748dd43d9ae3caff51d5b987. Commit 129ab0d2d9f3 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by: Masahiro Yamada <[email protected]>
2022-01-22usr/include/Makefile: add linux/nfc.h to the compile-test coverageDmitry V. Levin1-1/+0
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83705e ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c4e5f ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by: Dmitry V. Levin <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2022-01-22eeprom: at25: Restore missing allocationKees Cook1-0/+4
The at25 driver regressed in v5.17-rc1 due to a broken conflict resolution: the allocation of the object was accidentally removed. Restore it. This was found when building under CONFIG_FORTIFY_SOURCE=y and -Warray-bounds, which complained about strncpy() being used against an empty object: In function 'strncpy', inlined from 'at25_fw_to_chip.constprop' at drivers/misc/eeprom/at25.c:312:2: ./include/linux/fortify-string.h:48:33: warning: '__builtin_strncpy' offset [0, 9] is out of the bounds [0, 0] [-Warray-bounds] 48 | #define __underlying_strncpy __builtin_strncpy | ^ ./include/linux/fortify-string.h:59:16: note: in expansion of macro '__underlying_strncpy' 59 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'at25_fram_to_chip' at drivers/misc/eeprom/at25.c:373:2, inlined from 'at25_probe' at drivers/misc/eeprom/at25.c:453:10: ./include/linux/fortify-string.h:48:33: warning: '__builtin_strncpy' offset [0, 9] is out of the bounds [0, 0] [-Warray-bounds] 48 | #define __underlying_strncpy __builtin_strncpy | ^ ./include/linux/fortify-string.h:59:16: note: in expansion of macro '__underlying_strncpy' 59 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ Link: https://lore.kernel.org/lkml/CAHp75VdqK7h63fz-cPaQ2MGaVdaR2f1Fb5kKCZidUG3RwLsAVA@mail.gmail.com/ Fixes: af40d16042d6 ("Merge v5.15-rc5 into char-misc-next") Cc: Arnd Bergmann <[email protected]> Cc: Jiri Prchal <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-01-22KVM: arm64: vgic-v3: Restrict SEIS workaround to known broken systemsMarc Zyngier2-2/+18
Contrary to what df652bcf1136 ("KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors") was asserting, there is at least one other system out there (Cavium ThunderX2) implementing SEIS, and not in an obviously broken way. So instead of imposing the M1 workaround on an innocent bystander, let's limit it to the two known broken Apple implementations. Fixes: df652bcf1136 ("KVM: arm64: vgic-v3: Work around GICv3 locally generated SErrors") Reported-by: Ard Biesheuvel <[email protected]> Tested-by: Ard Biesheuvel <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2022-01-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds172-2820/+1766
Merge yet more updates from Andrew Morton: "This is the post-linux-next queue. Material which was based on or dependent upon material which was in -next. 69 patches. Subsystems affected by this patch series: mm (migration and zsmalloc), sysctl, proc, and lib" * emailed patches from Andrew Morton <[email protected]>: (69 commits) mm: hide the FRONTSWAP Kconfig symbol frontswap: remove support for multiple ops mm: mark swap_lock and swap_active_head static frontswap: simplify frontswap_register_ops frontswap: remove frontswap_test mm: simplify try_to_unuse frontswap: remove the frontswap exports frontswap: simplify frontswap_init frontswap: remove frontswap_curr_pages frontswap: remove frontswap_shrink frontswap: remove frontswap_tmem_exclusive_gets frontswap: remove frontswap_writethrough mm: remove cleancache lib/stackdepot: always do filter_irq_stacks() in stack_depot_save() lib/stackdepot: allow optional init and stack_table allocation by kvmalloc() proc: remove PDE_DATA() completely fs: proc: store PDE()->data into inode->i_private zsmalloc: replace get_cpu_var with local_lock zsmalloc: replace per zpage lock with pool->migrate_lock locking/rwlocks: introduce write_lock_nested ...
2022-01-22Merge tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds25-626/+573
Pull cifs fixes from Steve French: - multichannel fixes, addressing additional reconnect and DFS scenarios - reenabling fscache support (indexing rewrite, metadata caching e.g.) - send additional version information during NTLMSSP negotiate to improve debugging - fix for a mount race - DFS fixes - fix for a memory leak for stable * tag '5.17-rc-part2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number smb3: send NTLMSSP version information cifs: Support fscache indexing rewrite cifs: cifs_ses_mark_for_reconnect should also update reconnect bits cifs: update tcpStatus during negotiate and sess setup cifs: make status checks in version independent callers cifs: remove repeated state change in dfs tree connect cifs: fix the cifs_reconnect path for DFS cifs: remove unused variable ses_selected cifs: protect all accesses to chan_* with chan_lock cifs: fix the connection state transitions with multichannel cifs: check reconnects for channels of active tcons too smb3: add new defines from protocol specification cifs: serialize all mount attempts cifs: quirk for STATUS_OBJECT_NAME_INVALID returned for non-ASCII dfs refs cifs: alloc_path_with_tree_prefix: do not append sep. if the path is empty cifs: clean up an inconsistent indenting cifs: free ntlmsspblob allocated in negotiate
2022-01-22Merge tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-36/+4
Pull xfs fixes from Darrick Wong: "One of the patches removes some dead code from xfs_ioctl32.h and the other fixes broken workqueue flushing in the inode garbage collector. - Minor cleanup of ioctl32 cruft - Clean up open coded inodegc workqueue function calls" * tag 'xfs-5.17-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: flush inodegc workqueue tasks before cancel xfs: remove unused xfs_ioctl32.h declarations
2022-01-22Merge tag 'fscache-fixes-20220121' of ↵Linus Torvalds10-51/+113
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull more fscache updates from David Howells: "A set of fixes and minor updates for the fscache rewrite: - Fix mishandling of volume collisions (the wait condition is inverted and so it was only waiting if the volume collision was already resolved). - Fix miscalculation of whether there's space available in cachefiles. - Make sure a default cache name is set on a cache if the user hasn't set one by the time they bind the cache. - Adjust the way the backing inode is presented in tracepoints, add a tracepoint for mkdir and trace directory lookup. - Add a tracepoint for failure to set the active file mark. - Add an explanation of the checks made on the backing filesystem. - Check that the backing filesystem supports tmpfile. - Document how the page-release cancellation of the read-skip optimisation works. And I've included a change for netfslib: - Make ops->init_rreq() optional" * tag 'fscache-fixes-20220121' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: netfs: Make ops->init_rreq() optional fscache: Add a comment explaining how page-release optimisation works cachefiles: Check that the backing filesystem supports tmpfiles cachefiles: Explain checks in a comment cachefiles: Trace active-mark failure cachefiles: Make some tracepoint adjustments cachefiles: set default tag name if it's unspecified cachefiles: Calculate the blockshift in terms of bytes, not pages fscache: Fix the volume collision wait condition
Powered by cgit, Gruvboxed by Blaster4385.