aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-10-11bridge: update mdb expiration timer upon reports.Vlad Yasevich1-1/+8
commit 9f00b2e7cf241fa389733d41b615efdaa2cb0f5b bridge: only expire the mdb entry when query is received changed the mdb expiration timer to be armed only when QUERY is received. Howerver, this causes issues in an environment where the multicast server socket comes and goes very fast while a client is trying to send traffic to it. The root cause is a race where a sequence of LEAVE followed by REPORT messages can race against QUERY messages generated in response to LEAVE. The QUERY ends up starting the expiration timer, and that timer can potentially expire after the new REPORT message has been received signaling the new join operation. This leads to a significant drop in multicast traffic and possible complete stall. The solution is to have REPORT messages update the expiration timer on entries that already exist. CC: Cong Wang <[email protected]> CC: Herbert Xu <[email protected]> CC: Stephen Hemminger <[email protected]> Signed-off-by: Vlad Yasevich <[email protected]> Acked-by: Herbert Xu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-10wireless: cw1200: acquire hwbus lock around cw1200_irq_handler() call.Solomon Peachy1-0/+2
This fixes "lost interrupt" problems that occurred on SPI-based systems. cw1200_irq_handler() expects the hwbus to be locked, but on the SPI-path, that lock wasn't taken (unlike in the SDIO-path, where the generic SDIO-code takes care of acquiring the lock). Cc: [email protected] Signed-off-by: David Mosberger <[email protected]> Signed-off-by: Solomon Peachy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2013-10-10rtlwifi: rtl8192cu: Fix error in pointer arithmeticMark Cave-Ayland1-1/+2
An error in calculating the offset in an skb causes the driver to read essential device info from the wrong locations. The main effect is that automatic gain calculations are nonsense. Signed-off-by: Mark Cave-Ayland <[email protected]> Signed-off-by: Larry Finger <[email protected]> Cc: Stable <[email protected]> [2.6.39+] Signed-off-by: John W. Linville <[email protected]>
2013-10-10Merge branch 'for-john' of ↵John W. Linville4-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-10-09can: at91-can: fix device to driver data mapping for platform devicesMarc Kleine-Budde1-2/+2
In commit: 3078cde7 can: at91_can: add dt support device tree support was added to the at91_can driver. In this commit the mapping of device to driver data was mixed up. This results in the sam9x5 parameters being used for the sam9263 and the workaround for the broken mailbox 0 on the sam9263 not being activated. This patch fixes the broken platform_device_id table. Cc: linux-stable <[email protected]> Cc: Ludovic Desroches <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2013-10-09can: flexcan: fix mx28 detection by rearanging OF match tableMarc Kleine-Budde1-2/+2
The current implemetation of of_match_device() relies that the of_device_id table in the driver is sorted from most specific to least specific compatible. Without this patch the mx28 is detected as the less specific p1010. This leads to a p1010 specific workaround is activated on the mx28, which is not needed. Cc: linux-stable <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2013-10-09can: flexcan: flexcan_chip_start: fix regression, mark one MB for TX and ↵Marc Kleine-Budde1-2/+8
abort pending TX In patch 0d1862e can: flexcan: fix flexcan_chip_start() on imx6 the loop in flexcan_chip_start() that iterates over all mailboxes after the soft reset of the CAN core was removed. This loop put all mailboxes (even the ones marked as reserved 1...7) into EMPTY/INACTIVE mode. On mailboxes 8...63, this aborts any pending TX messages. After a cold boot there is random garbage in the mailboxes, which leads to spontaneous transmit of CAN frames during first activation. Further if the interface was disabled with a pending message (usually due to an error condition on the CAN bus), this message is retransmitted after enabling the interface again. This patch fixes the regression by: 1) Limiting the maximum number of used mailboxes to 8, 0...7 are used by the RX FIFO, 8 is used by TX. 2) Marking the TX mailbox as EMPTY/INACTIVE, so that any pending TX of that mailbox is aborted. Cc: linux-stable <[email protected]> Cc: Lothar Waßmann <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2013-10-09Merge branch 'for-davem' of ↵David S. Miller9-20/+85
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: =================== Please pull this batch of fixes intended for 3.12... Most of the bits are for iwlwifi -- Johannes says: "I have a fix for WoWLAN/D3, a PCIe device fix, we're removing a warning, there's a fix for RF-kill while scanning (which goes together with a mac80211 fix) and last but not least we have many new PCI IDs." Also for iwlwifi is a patch from Johannes to correct some merge damage that crept into the tree before the last merge window. On top of that, Felix Fietkau sends an ath9k patch to avoid a Tx scheduling hang when changing channels to do a scan. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-09Merge branch 'gianfar'David S. Miller1-10/+28
Merge in gianfar driver bug fixes from Claudiu Manoil. Signed-off-by: David S. Miller <[email protected]>
2013-10-09gianfar: Enable eTSEC-20 erratum w/a for P2020 Rev1Claudiu Manoil1-0/+3
Enable workaround for P2020/P2010 erratum eTSEC 20, "Excess delays when transmitting TOE=1 large frames". The impact is that frames lager than 2500-bytes for which TOE (i.e. TCP/IP hw accelerations like Tx csum) is enabled may see excess delay before start of transmission. This erratum was fixed in Rev 2.0. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-09gianfar: Use mpc85xx support for errata detectionClaudiu Manoil1-8/+25
Use the macros and defines from mpc85xx.h to simplify and prevent errors in identifying a mpc85xx based SoC for errata detection. This should help enabling (and identifying) workarounds for various mpc85xx based chips and revisions. For instance, express MPC8548 Rev.2 as: (SVR_SOC_VER(svr) == SVR_8548) && (SVR_REV(svr) == 0x20) instead of: (pvr == 0x80210020 && mod == 0x8030 && rev == 0x0020) Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-09gianfar: Enable eTSEC-A002 erratum w/a for all partsClaudiu Manoil1-6/+4
A002 is still in "no plans to fix" state, and applies to all the current P1/P2 parts as well, so it's resonable to enable its workaround by default, for all the soc's with etsec. The impact of not enabling this workaround for affected parts is that under certain conditons (runt frames or even frames with RX error detected at PHY level) during controller reset, the controller might fail to indicate Rx reset (GRS) completion. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-09Merge branch 'master' of ↵David S. Miller9-42/+59
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) We used the wrong netlink attribute to verify the lenght of the replay window on async events. Fix this by using the right netlink attribute. 2) Policy lookups can not match the output interface on forwarding. Add the needed informations to the flow informations. 3) We update the pmtu when we receive a ICMPV6_DEST_UNREACH message on IPsec with ipv6. This is wrong and leads to strange fragmented packets, only ICMPV6_PKT_TOOBIG messages should update the pmtu. Fix this by removing the ICMPV6_DEST_UNREACH check from the IPsec protocol error handlers. 4) The legacy IPsec anti replay mechanism supports anti replay windows up to 32 packets. If a user requests for a bigger anti replay window, we use 32 packets but pretend that we use the requested window size. Fix from Fan Du. 5) If asynchronous events are enabled and replay_maxdiff is set to zero, we generate an async event for every received packet instead of checking whether a timeout occurred. Fix from Thomas Egerer. 6) Policies need a refcount when the state resolution timer is armed. Otherwise the timer can fire after the policy is deleted. 7) We might dreference a NULL pointer if the hold_queue is empty, add a check to avoid this. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-09net: secure_seq: Fix warning when CONFIG_IPV6 and CONFIG_INET are not selectedFabio Estevam1-0/+2
net_secret() is only used when CONFIG_IPV6 or CONFIG_INET are selected. Building a defconfig with both of these symbols unselected (Using the ARM at91sam9rl_defconfig, for example) leads to the following build warning: $ make at91sam9rl_defconfig # # configuration written to .config # $ make net/core/secure_seq.o scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/mach-types.h' is up to date. CALL scripts/checksyscalls.sh CC net/core/secure_seq.o net/core/secure_seq.c:17:13: warning: 'net_secret_init' defined but not used [-Wunused-function] Fix this warning by protecting the definition of net_secret() with these symbols. Reported-by: Olof Johansson <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-09cfg80211: don't add p2p device while in RFKILLEmmanuel Grumbach2-2/+3
Since P2P device doesn't have a netdev associated to it, we cannot prevent the user to start it when in RFKILL. So refuse to even add it when in RFKILL. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-09mac80211: correctly close cancelled scansEmmanuel Grumbach2-0/+22
__ieee80211_scan_completed is called from a worker. This means that the following flow is possible. * driver calls ieee80211_scan_completed * mac80211 cancels the scan (that is already complete) * __ieee80211_scan_completed runs When scan_work will finally run, it will see that the scan hasn't been aborted and might even trigger another scan on another band. This leads to a situation where cfg80211's scan is not done and no further scan can be issued. Fix this by setting a new flag when a HW scan is being cancelled so that no other scan will be triggered. Cc: [email protected] Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2013-10-09Merge branch 'master' of ↵John W. Linville9-20/+85
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-10-08Merge branch 'sfc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfcDavid S. Miller5-31/+151
Ben Hutchings says: ==================== Some more fixes for EF10 support; hopefully the last lot: 1. Fixes for reading statistics, from Edward Cree and Jon Cooper. 2. Addition of ethtool statistics for packets dropped by the hardware before they were associated with a specific function, from Edward Cree. 3. Only bind to functions that are in control of their associated port, as the driver currently assumes this is the case. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-08pkt_sched: fq: fix non TCP flows pacingEric Dumazet2-11/+10
Steinar reported FQ pacing was not working for UDP flows. It looks like the initial sk->sk_pacing_rate value of 0 was a wrong choice. We should init it to ~0U (unlimited) Then, TCA_FQ_FLOW_DEFAULT_RATE should be removed because it makes no real sense. The default rate is really unlimited, and we need to avoid a zero divide. Reported-by: Steinar H. Gunderson <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08qlcnic: add missing destroy_workqueue() on error path in qlcnic_probe()Wei Yongjun1-1/+4
Add the missing destroy_workqueue() before return from qlcnic_probe() in the error handling case. Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08moxa: fix the error handling in moxart_mac_probe()Wei Yongjun1-6/+16
This patch fix the error handling in moxart_mac_probe(): - return -ENOMEM in some memory alloc fail cases - add missing free_netdev() in the error handling case Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08net: vlan: fix nlmsg size calculation in vlan_get_size()Marc Kleine-Budde1-1/+1
This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Cc: Patrick McHardy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08pkt_sched: fq: fix typo for initial_quantumEric Dumazet1-1/+1
TCA_FQ_INITIAL_QUANTUM should set q->initial_quantum Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08ipv6: Fix the upper MTU limit in GRE tunnelOussama Ghorbel1-2/+1
Unlike ipv4, the struct member hlen holds the length of the GRE and ipv6 headers. This length is also counted in dev->hard_header_len. Perhaps, it's more clean to modify the hlen to count only the GRE header without ipv6 header as the variable name suggest, but the simple way to fix this without regression risk is simply modify the calculation of the limit in ip6gre_tunnel_change_mtu function. Verified in kernel version v3.11. Signed-off-by: Oussama Ghorbel <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08xen-netback: transition to CLOSED when removing a VIFDavid Vrabel1-0/+4
If a guest is destroyed without transitioning its frontend to CLOSED, the domain becomes a zombie as netback was not grant unmapping the shared rings. When removing a VIF, transition the backend to CLOSED so the VIF is disconnected if necessary (which will unmap the shared rings etc). This fixes a regression introduced by 279f438e36c0a70b23b86d2090aeec50155034a9 (xen-netback: Don't destroy the netdev until the vif is shut down). Signed-off-by: David Vrabel <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Wei Liu <[email protected]> Cc: Paul Durrant <[email protected]> Acked-by: Wei Liu <[email protected]> Reviewed-by: Paul Durrant <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08Merge branch 'mlx4'David S. Miller2-19/+26
Amir Vadai says: ==================== net/mlx4_en: Fix pages never dma unmapped on rx This patchset fixes a bug introduced by commit 51151a16 (mlx4: allow order-0 memory allocations in RX path). Where dma_unmap_page wasn't called. Changes from V0: - Added "Rename name of mlx4_en_rx_alloc members". Old names were confusing. - Last frag in page calculation was wrong. Since all frags in page are of the same size, need to add this frag_stride to end of frag offset, and not the size of next frag in skb. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-08net/mlx4_en: Fix pages never dma unmapped on rxAmir Vadai1-2/+3
This patch fixes a bug introduced by commit 51151a16 (mlx4: allow order-0 memory allocations in RX path). dma_unmap_page never reached because condition to detect last fragment in page is wrong. offset+frag_stride can't be greater than size, need to make sure no additional frag will fit in page => compare offset + frag_stride + next_frag_size instead. next_frag_size is the same as the current one, since page is shared only with frags of the same size. CC: Eric Dumazet <[email protected]> Signed-off-by: Amir Vadai <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08net/mlx4_en: Rename name of mlx4_en_rx_alloc membersAmir Vadai2-19/+25
Add page prefix to page related members: @size and @offset into @page_size and @page_offset CC: Eric Dumazet <[email protected]> Signed-off-by: Amir Vadai <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08net: sh_eth: Fix RX packets errors on R8A7740Nguyen Hong Ky1-0/+4
This patch will fix RX packets errors when receiving big size of data by set bit RNC = 1. RNC - Receive Enable Control 0: Upon completion of reception of one frame, the E-DMAC writes the receive status to the descriptor and clears the RR bit in EDRRR to 0. 1: Upon completion of reception of one frame, the E-DMAC writes (writes back) the receive status to the descriptor. In addition, the E-DMAC reads the next descriptor and prepares for reception of the next frame. In addition, for get more stable when receiving packets, I set maximum size for the transmit/receive FIFO and inserts padding in receive data. Signed-off-by: Nguyen Hong Ky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08l2tp: Fix build warning with ipv6 disabled.David S. Miller1-5/+8
net/l2tp/l2tp_core.c: In function ‘l2tp_verify_udp_checksum’: net/l2tp/l2tp_core.c:499:22: warning: unused variable ‘tunnel’ [-Wunused-variable] Create a helper "l2tp_tunnel()" to facilitate this, and as a side effect get rid of a bunch of unnecessary void pointer casts. Signed-off-by: David S. Miller <[email protected]>
2013-10-08tun: don't look at current when non-blockingMichael S. Tsirkin1-3/+5
We play with a wait queue even if socket is non blocking. This is an obvious waste. Besides, it will prevent calling the non blocking variant when current is not valid. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08Merge branch 'mrf24j40'David S. Miller1-22/+9
Alan Ott says: ==================== Fix race conditions in mrf24j40 interrupts After testing with the betas of this patchset, it's been rebased and is ready for inclusion. David Hauweele noticed that the mrf24j40 would hang arbitrarily after some period of heavy traffic. Two race conditions were discovered, and the driver was changed to use threaded interrupts, since the enable/disable of interrupts in the driver has recently been a lighning rod whenever issues arise related to interrupts (costing engineering time), and since threaded interrupts are the right way to do it. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-08mrf24j40: Use level-triggered interruptsAlan Ott1-1/+1
The mrf24j40 generates level interrupts. There are rare cases where it appears that the interrupt line never gets de-asserted between interrupts, causing interrupts to be lost, and causing a hung device from the driver's perspective. Switching the driver to interpret these interrupts as level-triggered fixes this issue. Signed-off-by: Alan Ott <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08mrf24j40: Use threaded IRQ handlerAlan Ott1-20/+7
Eliminate all the workqueue and interrupt enable/disable. Signed-off-by: Alan Ott <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08mrf24j40: Move INIT_COMPLETION() to before packet transmissionAlan Ott1-2/+2
This avoids a race condition where complete(tx_complete) could be called before tx_complete is initialized. Signed-off-by: Alan Ott <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08Merge branch '6lowpan'David S. Miller1-0/+5
Alan Ott says: ==================== Alexander Aring suggested that devices desired to be linked to 6lowpan be checked for actually being of type IEEE802154, since IEEE802154 devices are all that are supported by 6lowpan at present. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-086lowpan: Sync default hardware address of lowpan links to their wpanAlan Ott1-0/+3
When a lowpan link to a wpan device is created, set the hardware address of the lowpan link to that of the wpan device. Signed-off-by: Alan Ott <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-086lowpan: Only make 6lowpan links to IEEE802154 devicesAlan Ott1-0/+2
Refuse to create 6lowpan links if the actual hardware interface is of any type other than ARPHRD_IEEE802154. Signed-off-by: Alan Ott <[email protected]> Suggested-by: Alexander Aring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-08xfrm: check for a vaild skb in xfrm_policy_queue_processSteffen Klassert1-0/+4
We might dreference a NULL pointer if the hold_queue is empty, so add a check to avoid this. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert <[email protected]>
2013-10-08xfrm: Add refcount handling to queued policiesSteffen Klassert1-7/+17
We need to ensure that policies can't go away as long as the hold timer is armed, so take a refcont when we arm the timer and drop one if we delete it. Bug was introduced with git commit a0073fe18 ("xfrm: Add a state resolution packet queue") Signed-off-by: Steffen Klassert <[email protected]>
2013-10-07net: Update the sysctl permissions handler to test effective uid/gidEric W. Biederman1-2/+2
On Tue, 20 Aug 2013 11:40:04 -0500 Eric Sandeen <[email protected]> wrote: > This was brought up in a Red Hat bug (which may be marked private, I'm sorry): > > Bug 987055 - open O_WRONLY succeeds on some root owned files in /proc for process running with unprivileged EUID > > "On RHEL7 some of the files in /proc can be opened for writing by an unprivileged EUID." > > The flaw existed upstream as well last I checked. > > This commit in kernel v3.8 caused the regression: > > commit cff109768b2d9c03095848f4cd4b0754117262aa > Author: Eric W. Biederman <[email protected]> > Date: Fri Nov 16 03:03:01 2012 +0000 > > net: Update the per network namespace sysctls to be available to the network namespace owner > > - Allow anyone with CAP_NET_ADMIN rights in the user namespace of the > the netowrk namespace to change sysctls. > - Allow anyone the uid of the user namespace root the same > permissions over the network namespace sysctls as the global root. > - Allow anyone with gid of the user namespace root group the same > permissions over the network namespace sysctl as the global root group. > > Signed-off-by: "Eric W. Biederman" <[email protected]> > Signed-off-by: David S. Miller <[email protected]> > > because it changed /sys/net's special permission handler to test current_uid, not > current_euid; same for current_gid/current_egid. > > So in this case, root cannot drop privs via set[ug]id, and retains all privs > in this codepath. Modify the code to use current_euid(), and in_egroup_p, as in done in fs/proc/proc_sysctl.c:test_perm() Cc: [email protected] Reviewed-by: Eric Sandeen <[email protected]> Reported-by: Eric Sandeen <[email protected]> Signed-off-by: "Eric W. Biederman" <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07can: dev: fix nlmsg size calculation in can_get_size()Marc Kleine-Budde1-5/+5
This patch fixes the calculation of the nlmsg size, by adding the missing nla_total_size(). Signed-off-by: Marc Kleine-Budde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07ipv4: fix ineffective source address selectionJiri Benc1-1/+1
When sending out multicast messages, the source address in inet->mc_addr is ignored and rewritten by an autoselected one. This is caused by a typo in commit 813b3b5db831 ("ipv4: Use caller's on-stack flowi as-is in output route lookups"). Signed-off-by: Jiri Benc <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07net/ethernet: cpsw: DT read bool dual_emacMarkus Pargmann1-2/+2
Signed-off-by: Markus Pargmann <[email protected]> Acked-by: Mugunthan V N <[email protected]> Acked-by: Peter Korsgaard <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07net: ethernet: cpsw: Search childs for slave nodesMarkus Pargmann1-1/+5
The current implementation searches the whole DT for nodes named "slave". This patch changes it to search only child nodes for slaves. Signed-off-by: Markus Pargmann <[email protected]> Acked-by: Mugunthan V N <[email protected]> Acked-by: Peter Korsgaard <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07net: fix unsafe set_memory_rw from softirqAlexei Starovoitov8-18/+36
on x86 system with net.core.bpf_jit_enable = 1 sudo tcpdump -i eth1 'tcp port 22' causes the warning: [ 56.766097] Possible unsafe locking scenario: [ 56.766097] [ 56.780146] CPU0 [ 56.786807] ---- [ 56.793188] lock(&(&vb->lock)->rlock); [ 56.799593] <Interrupt> [ 56.805889] lock(&(&vb->lock)->rlock); [ 56.812266] [ 56.812266] *** DEADLOCK *** [ 56.812266] [ 56.830670] 1 lock held by ksoftirqd/1/13: [ 56.836838] #0: (rcu_read_lock){.+.+..}, at: [<ffffffff8118f44c>] vm_unmap_aliases+0x8c/0x380 [ 56.849757] [ 56.849757] stack backtrace: [ 56.862194] CPU: 1 PID: 13 Comm: ksoftirqd/1 Not tainted 3.12.0-rc3+ #45 [ 56.868721] Hardware name: System manufacturer System Product Name/P8Z77 WS, BIOS 3007 07/26/2012 [ 56.882004] ffffffff821944c0 ffff88080bbdb8c8 ffffffff8175a145 0000000000000007 [ 56.895630] ffff88080bbd5f40 ffff88080bbdb928 ffffffff81755b14 0000000000000001 [ 56.909313] ffff880800000001 ffff880800000000 ffffffff8101178f 0000000000000001 [ 56.923006] Call Trace: [ 56.929532] [<ffffffff8175a145>] dump_stack+0x55/0x76 [ 56.936067] [<ffffffff81755b14>] print_usage_bug+0x1f7/0x208 [ 56.942445] [<ffffffff8101178f>] ? save_stack_trace+0x2f/0x50 [ 56.948932] [<ffffffff810cc0a0>] ? check_usage_backwards+0x150/0x150 [ 56.955470] [<ffffffff810ccb52>] mark_lock+0x282/0x2c0 [ 56.961945] [<ffffffff810ccfed>] __lock_acquire+0x45d/0x1d50 [ 56.968474] [<ffffffff810cce6e>] ? __lock_acquire+0x2de/0x1d50 [ 56.975140] [<ffffffff81393bf5>] ? cpumask_next_and+0x55/0x90 [ 56.981942] [<ffffffff810cef72>] lock_acquire+0x92/0x1d0 [ 56.988745] [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380 [ 56.995619] [<ffffffff817628f1>] _raw_spin_lock+0x41/0x50 [ 57.002493] [<ffffffff8118f52a>] ? vm_unmap_aliases+0x16a/0x380 [ 57.009447] [<ffffffff8118f52a>] vm_unmap_aliases+0x16a/0x380 [ 57.016477] [<ffffffff8118f44c>] ? vm_unmap_aliases+0x8c/0x380 [ 57.023607] [<ffffffff810436b0>] change_page_attr_set_clr+0xc0/0x460 [ 57.030818] [<ffffffff810cfb8d>] ? trace_hardirqs_on+0xd/0x10 [ 57.037896] [<ffffffff811a8330>] ? kmem_cache_free+0xb0/0x2b0 [ 57.044789] [<ffffffff811b59c3>] ? free_object_rcu+0x93/0xa0 [ 57.051720] [<ffffffff81043d9f>] set_memory_rw+0x2f/0x40 [ 57.058727] [<ffffffff8104e17c>] bpf_jit_free+0x2c/0x40 [ 57.065577] [<ffffffff81642cba>] sk_filter_release_rcu+0x1a/0x30 [ 57.072338] [<ffffffff811108e2>] rcu_process_callbacks+0x202/0x7c0 [ 57.078962] [<ffffffff81057f17>] __do_softirq+0xf7/0x3f0 [ 57.085373] [<ffffffff81058245>] run_ksoftirqd+0x35/0x70 cannot reuse jited filter memory, since it's readonly, so use original bpf insns memory to hold work_struct defer kfree of sk_filter until jit completed freeing tested on x86_64 and i386 Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-07sfc: Only bind to EF10 functions with the LinkCtrl and Trusted flagsBen Hutchings1-1/+17
Although we do not yet enable multiple PFs per port, it is possible that a board will be reconfigured to enable them while the driver has not yet been updated to fully support this. The most obvious problem is that multiple functions may try to set conflicting link settings. But we will also run into trouble if the firmware doesn't consider us fully trusted. So, abort probing unless both the LinkCtrl and Trusted flags are set for this function. Signed-off-by: Ben Hutchings <[email protected]>
2013-10-07iwlwifi: pcie: fix merge damageJohannes Berg1-4/+4
The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2013-10-07ath9k: fix tx queue scheduling after channel changesFelix Fietkau1-12/+11
Otherwise, if queues are full during a scan, tx scheduling does not resume after switching back to the home channel. Cc: [email protected] Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2013-10-07Merge branch 'for-john' of ↵John W. Linville7-4/+70
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
Powered by cgit, Gruvboxed by Blaster4385.