| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Paolo Abeni reports that on some systems the pyroute2 version isn't
new enough to run the test suite. Ensure that we support a minimum
version of 0.6 for all cases (which does include the existing ones).
The 0.6.1 version was released in May of 2021, so should be
propagated to most installations at this point.
The alternative that Paolo proposed was to only skip when the
add-flow is being run. This would be okay for most cases, except
if a future test case is added that needs to do flow dump without
an associated add (just guessing). In that case, it could also be
broken and we would need additional skip logic anyway. Just draw
a line in the sand now.
Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Reported-by: Paolo Abeni <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Aaron Conole <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 45e34c8af58f23db4474e2bfe79183efec09a18b, and the
two subsequent fixes to it:
3f874c9b2aae ("x86/smp: Don't send INIT to non-present and non-booted CPUs")
b1472a60a584 ("x86/smp: Don't send INIT to boot CPU")
because it seems to result in hung machines at shutdown. Particularly
some Dell machines, but Thomas says
"The rest seems to be Lenovo and Sony with Alderlake/Raptorlake CPUs -
at least that's what I could figure out from the various bug reports.
I don't know which CPUs the DELL machines have, so I can't say it's a
pattern.
I agree with the revert for now"
Ashok Raj chimes in:
"There was a report (probably this same one), and it turns out it was a
bug in the BIOS SMI handler.
The client BIOS's were waiting for the lowest APICID to be the SMI
rendevous master. If this is MeteorLake, the BSP wasn't the one with
the lowest APIC and it triped here.
The BIOS change is also being pushed to others for assimilation :)
Server BIOS's had this correctly for a while now"
and it does look likely to be some bad interaction between SMI and the
non-BSP cores having put into INIT (and thus unresponsive until reset).
Link: https://bbs.archlinux.org/viewtopic.php?pid=2124429
Link: https://www.reddit.com/r/openSUSE/comments/16qq99b/tumbleweed_shutdown_did_not_finish_completely/
Link: https://forum.artixlinux.org/index.php/topic,5997.0.html
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2241279
Acked-by: Thomas Gleixner <[email protected]>
Cc: Ashok Raj <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Syzbot reported two new paths to hit an internal WARNING using the
new virtio gso type VIRTIO_NET_HDR_GSO_UDP_L4.
RIP: 0010:skb_checksum_help+0x4a2/0x600 net/core/dev.c:3260
skb len=64521 gso_size=344
and
RIP: 0010:skb_warn_bad_offload+0x118/0x240 net/core/dev.c:3262
Older virtio types have historically had loose restrictions, leading
to many entirely impractical fuzzer generated packets causing
problems deep in the kernel stack. Ideally, we would have had strict
validation for all types from the start.
New virtio types can have tighter validation. Limit UDP GSO packets
inserted via virtio to the same limits imposed by the UDP_SEGMENT
socket interface:
1. must use checksum offload
2. checksum offload matches UDP header
3. no more segments than UDP_MAX_SEGMENTS
4. UDP GSO does not take modifier flags, notably SKB_GSO_TCP_ECN
Fixes: 860b7f27b8f7 ("linux/virtio_net.h: Support USO offload in vnet header.")
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/[email protected]/
Reported-by: [email protected]
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Willem de Bruijn <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit 295525e29a5b ("virtio_net: merge dma operations when filling
mergeable buffers") unmaps the buffer with DMA_ATTR_SKIP_CPU_SYNC when
the dma->ref is zero. We do that with DMA_ATTR_SKIP_CPU_SYNC, because we
do not want to do the sync for the entire page_frag. But that misses the
sync for the current area.
This patch does cpu sync regardless of whether the ref is zero or not.
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Reported-by: Michael Roth <[email protected]>
Closes: http://lore.kernel.org/all/[email protected]
Signed-off-by: Xuan Zhuo <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit f6fca3917b4d "btrfs: store chunk size in space-info struct"
broke data chunk allocations on non-zoned multi-device filesystems when
using default chunk_size. Commit 5da431b71d4b "btrfs: fix the max chunk
size and stripe length calculation" partially fixed that, and this patch
completes the fix for that case.
After commit f6fca3917b4d and 5da431b71d4b, the sequence of events for
a data chunk allocation on a non-zoned filesystem is:
1. btrfs_create_chunk calls init_alloc_chunk_ctl, which copies
space_info->chunk_size (default 10 GiB) to ctl->max_stripe_len
unmodified. Before f6fca3917b4d, ctl->max_stripe_len value was
1 GiB for non-zoned data chunks and not configurable.
2. btrfs_create_chunk calls gather_device_info which consumes
and produces more fields of chunk_ctl.
3. gather_device_info multiplies ctl->max_stripe_len by
ctl->dev_stripes (which is 1 in all cases except dup)
and calls find_free_dev_extent with that number as num_bytes.
4. find_free_dev_extent locates the first dev_extent hole on
a device which is at least as large as num_bytes. With default
max_chunk_size from f6fca3917b4d, it finds the first hole which is
longer than 10 GiB, or the largest hole if that hole is shorter
than 10 GiB. This is different from the pre-f6fca3917b4d
behavior, where num_bytes is 1 GiB, and find_free_dev_extent
may choose a different hole.
5. gather_device_info repeats step 4 with all devices to find
the first or largest dev_extent hole that can be allocated on
each device.
6. gather_device_info sorts the device list by the hole size
on each device, using total unallocated space on each device to
break ties, then returns to btrfs_create_chunk with the list.
7. btrfs_create_chunk calls decide_stripe_size_regular.
8. decide_stripe_size_regular finds the largest stripe_len that
fits across the first nr_devs device dev_extent holes that were
found by gather_device_info (and satisfies other constraints
on stripe_len that are not relevant here).
9. decide_stripe_size_regular caps the length of the stripe it
computed at 1 GiB. This cap appeared in 5da431b71d4b to correct
one of the other regressions introduced in f6fca3917b4d.
10. btrfs_create_chunk creates a new chunk with the above
computed size and number of devices.
At step 4, gather_device_info() has found a location where stripe up to
10 GiB in length could be allocated on several devices, and selected
which devices should have a dev_extent allocated on them, but at step
9, only 1 GiB of the space that was found on each device can be used.
This mismatch causes new suboptimal chunk allocation cases that did not
occur in pre-f6fca3917b4d kernels.
Consider a filesystem using raid1 profile with 3 devices. After some
balances, device 1 has 10x 1 GiB unallocated space, while devices 2
and 3 have 1x 10 GiB unallocated space, i.e. the same total amount of
space, but distributed across different numbers of dev_extent holes.
For visualization, let's ignore all the chunks that were allocated before
this point, and focus on the remaining holes:
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10x 1 GiB unallocated)
Device 2: [__________] (10 GiB contig unallocated)
Device 3: [__________] (10 GiB contig unallocated)
Before f6fca3917b4d, the allocator would fill these optimally by
allocating chunks with dev_extents on devices 1 and 2 ([12]), 1 and 3
([13]), or 2 and 3 ([23]):
[after 0 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [__________] (10 GiB)
Device 3: [__________] (10 GiB)
[after 1 chunk allocation]
Device 1: [12] [_] [_] [_] [_] [_] [_] [_] [_] [_]
Device 2: [12] [_________] (9 GiB)
Device 3: [__________] (10 GiB)
[after 2 chunk allocations]
Device 1: [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
Device 2: [12] [_________] (9 GiB)
Device 3: [13] [_________] (9 GiB)
[after 3 chunk allocations]
Device 1: [12] [13] [12] [_] [_] [_] [_] [_] [_] [_] (7 GiB)
Device 2: [12] [12] [________] (8 GiB)
Device 3: [13] [_________] (9 GiB)
[...]
[after 12 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [_] [_] (2 GiB)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [__] (2 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)
[after 13 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [_] (1 GiB)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [__] (2 GiB)
[after 14 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [_] (1 GiB)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [13] [_] (1 GiB)
[after 15 chunk allocations]
Device 1: [12] [13] [12] [13] [12] [13] [12] [13] [12] [13] (full)
Device 2: [12] [12] [23] [23] [12] [12] [23] [23] [12] [23] (full)
Device 3: [13] [13] [23] [23] [13] [23] [13] [23] [13] [23] (full)
This allocates all of the space with no waste. The sorting function used
by gather_device_info considers free space holes above 1 GiB in length
to be equal to 1 GiB, so once find_free_dev_extent locates a sufficiently
long hole on each device, all the holes appear equal in the sort, and the
comparison falls back to sorting devices by total free space. This keeps
usable space on each device equal so they can all be filled completely.
After f6fca3917b4d, the allocator prefers the devices with larger holes
over the devices with more free space, so it makes bad allocation choices:
[after 1 chunk allocation]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [_________] (9 GiB)
Device 3: [23] [_________] (9 GiB)
[after 2 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [________] (8 GiB)
Device 3: [23] [23] [________] (8 GiB)
[after 3 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [23] [_______] (7 GiB)
Device 3: [23] [23] [23] [_______] (7 GiB)
[...]
[after 9 chunk allocations]
Device 1: [_] [_] [_] [_] [_] [_] [_] [_] [_] [_] (10 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
[after 10 chunk allocations]
Device 1: [12] [_] [_] [_] [_] [_] [_] [_] [_] [_] (9 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [_] (1 GiB)
[after 11 chunk allocations]
Device 1: [12] [13] [_] [_] [_] [_] [_] [_] [_] [_] (8 GiB)
Device 2: [23] [23] [23] [23] [23] [23] [23] [23] [12] (full)
Device 3: [23] [23] [23] [23] [23] [23] [23] [23] [13] (full)
No further allocations are possible, with 8 GiB wasted (4 GiB of data
space). The sort in gather_device_info now considers free space in
holes longer than 1 GiB to be distinct, so it will prefer devices 2 and
3 over device 1 until all but 1 GiB is allocated on devices 2 and 3.
At that point, with only 1 GiB unallocated on every device, the largest
hole length on each device is equal at 1 GiB, so the sort finally moves
to ordering the devices with the most free space, but by this time it
is too late to make use of the free space on device 1.
Note that it's possible to contrive a case where the pre-f6fca3917b4d
allocator fails the same way, but these cases generally have extensive
dev_extent fragmentation as a precondition (e.g. many holes of 768M
in length on one device, and few holes 1 GiB in length on the others).
With the regression in f6fca3917b4d, bad chunk allocation can occur even
under optimal conditions, when all dev_extent holes are exact multiples
of stripe_len in length, as in the example above.
Also note that post-f6fca3917b4d kernels do treat dev_extent holes
larger than 10 GiB as equal, so the bad behavior won't show up on a
freshly formatted filesystem; however, as the filesystem ages and fills
up, and holes ranging from 1 GiB to 10 GiB in size appear, the problem
can show up as a failure to balance after adding or removing devices,
or an unexpected shortfall in available space due to unequal allocation.
To fix the regression and make data chunk allocation work
again, set ctl->max_stripe_len back to the original SZ_1G, or
space_info->chunk_size if that's smaller (the latter can happen if the
user set space_info->chunk_size to less than 1 GiB via sysfs, or it's
a 32 MiB system chunk with a hardcoded chunk_size and stripe_len).
While researching the background of the earlier commits, I found that an
identical fix was already proposed at:
https://lore.kernel.org/linux-btrfs/[email protected]/
The previous review missed one detail: ctl->max_stripe_len is used
before decide_stripe_size_regular() is called, when it is too late for
the changes in that function to have any effect. ctl->max_stripe_len is
not used directly by decide_stripe_size_regular(), but the parameter
does heavily influence the per-device free space data presented to
the function.
Fixes: f6fca3917b4d ("btrfs: store chunk size in space-info struct")
CC: [email protected] # 6.1+
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Zygo Blaxell <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some USB and Thunderbolt driver fixes for 6.6-rc6 to resolve
a number of small reported issues. Included in here are:
- thunderbolt driver fixes
- xhci driver fixes
- cdns3 driver fixes
- musb driver fixes
- a number of typec driver fixes
- a few other small driver fixes
All of these have been in linux-next with no reported issues"
* tag 'usb-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits)
usb: typec: ucsi: Use GET_CAPABILITY attributes data to set power supply scope
usb: typec: ucsi: Fix missing link removal
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
xhci: Preserve RsvdP bits in ERSTBA register correctly
xhci: Clear EHB bit only at end of interrupt handler
xhci: track port suspend state correctly in unsuccessful resume cases
usb: xhci: xhci-ring: Use sysdev for mapping bounce buffer
usb: typec: ucsi: Clear EVENT_PENDING bit if ucsi_send_command fails
usb: misc: onboard_hub: add support for Microchip USB2412 USB 2.0 hub
usb: gadget: udc-xilinx: replace memcpy with memcpy_toio
usb: cdns3: Modify the return value of cdns_set_active () to void when CONFIG_PM_SLEEP is disabled
usb: dwc3: Soft reset phy on probe for host
usb: hub: Guard against accesses to uninitialized BOS descriptors
usb: typec: qcom: Update the logic of regulator enable and disable
usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call
usb: musb: Get the musb_qh poniter after musb_giveback
usb: musb: Modify the "HWVers" register address
usb: cdnsp: Fixes issue with dequeuing not queued requests
thunderbolt: Restart XDomain discovery handshake after failure
thunderbolt: Correct TMU mode initialization from hardware
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a small set of char/misc and other smaller driver subsystem
fixes for 6.6-rc6. Included in here are:
- lots of iio driver fixes
- binder memory leak fix
- mcb driver fixes
- counter driver fixes
- firmware loader documentation fix
- documentation update for embargoed hardware issues
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (22 commits)
iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
iio: adc: ad7192: Correct reference voltage
iio: light: vcnl4000: Don't power on/off chip in config
iio: addac: Kconfig: update ad74413r selections
iio: pressure: dps310: Adjust Timeout Settings
iio: imu: bno055: Fix missing Kconfig dependencies
iio: adc: imx8qxp: Fix address for command buffer registers
iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
binder: fix memory leaks of spam and pending work
firmware_loader: Update contact emails for ABI docs
Documentation: embargoed-hardware-issues.rst: Clarify prenotifaction
mcb: remove is_added flag from mcb_device struct
coresight: tmc-etr: Disable warnings for allocation failures
coresight: Fix run time warnings while reusing ETR buffer
iio: admv1013: add mixer_vgate corner cases
iio: pressure: bmp280: Fix NULL pointer exception
iio: dac: ad3552r: Correct device IDs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs
Pull overlayfs fixes from Amir Goldstein:
- Various fixes for regressions due to conversion to new mount
api in v6.5
- Disable a new mount option syntax (append lowerdir) that was
added in v6.5 because we plan to add a different lowerdir
append syntax in v6.7
* tag 'ovl-fixes-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: temporarily disable appending lowedirs
ovl: fix regression in showing lowerdir mount option
ovl: fix regression in parsing of mount options with escaped comma
fs: factor out vfs_parse_monolithic_sep() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix softlockup/crash when using hcall tracing
- Fix pte_access_permitted() for PAGE_NONE on 8xx
- Fix inverted pte_young() test in __ptep_test_and_clear_young()
on 64-bit BookE
- Fix unhandled math emulation exception on 85xx
- Fix kernel crash on syscall return on 476
Thanks to Athira Rajeev, Christophe Leroy, Eddie James, and Naveen N
Rao.
* tag 'powerpc-6.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/47x: Fix 47x syscall return crash
powerpc/85xx: Fix math emulation exception
powerpc/64e: Fix wrong test in __ptep_test_and_clear_young()
powerpc/8xx: Fix pte_access_permitted() for PAGE_NONE
powerpc/pseries: Remove unused r0 in the hcall tracing code
powerpc/pseries: Fix STK_PARAM access in the hcall tracing code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
"Fix a Longsoon build warning by harmonizing the
arch_[un]register_cpu() prototypes between architectures"
* tag 'smp-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu-hotplug: Provide prototypes for arch CPU registration
|
|
Driver allocates the LL2 rx buffers from kmalloc()
area to construct the skb using slab_build_skb()
The required size allocation seems to have overlooked
for accounting both skb_shared_info size and device
placement padding bytes which results into the below
panic when doing skb_put() for a standard MTU sized frame.
skbuff: skb_over_panic: text:ffffffffc0b0225f len:1514 put:1514
head:ff3dabceaf39c000 data:ff3dabceaf39c042 tail:0x62c end:0x566
dev:<NULL>
…
skb_panic+0x48/0x4a
skb_put.cold+0x10/0x10
qed_ll2b_complete_rx_packet+0x14f/0x260 [qed]
qed_ll2_rxq_handle_completion.constprop.0+0x169/0x200 [qed]
qed_ll2_rxq_completion+0xba/0x320 [qed]
qed_int_sp_dpc+0x1a7/0x1e0 [qed]
This patch fixes this by accouting skb_shared_info and device
placement padding size bytes when allocating the buffers.
Cc: David S. Miller <[email protected]>
Fixes: 0a7fb11c23c0 ("qed: Add Light L2 support")
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
into HEAD
KVM selftests fixes for 6.6:
- Play nice with %llx when formatting guest printf and assert statements.
- Clean up stale test metadata.
- Zero-initialize structures in memslot perf test to workaround a suspected
"may be used uninitialized" false positives from GCC.
|
|
KVM x86/pmu fixes for 6.6:
- Truncate writes to PMU counters to the counter's width to avoid spurious
overflows when emulating counter events in software.
- Set the LVTPC entry mask bit when handling a PMI (to match Intel-defined
architectural behavior).
- Treat KVM_REQ_PMI as a wake event instead of queueing host IRQ work to
kick the guest out of emulated halt.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.6, take #2
- Fix the handling of the phycal timer offset when FEAT_ECV
and CNTPOFF_EL2 are implemented.
- Restore the functionnality of Permission Indirection that
was broken by the Fine Grained Trapping rework
- Cleanup some PMU event sharing code
|
|
Pull smb server fixes from Steve French:
- Fix for possible double free in RPC read
- Add additional check to clarify smb2_open path and quiet Coverity
- Fix incorrect error rsp in a compounding path
- Fix to properly fail open of file with pending delete on close
* tag '6.6-rc5-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix potential double free on smb2_read_pipe() error path
ksmbd: fix Null pointer dereferences in ksmbd_update_fstate()
ksmbd: fix wrong error response status by using set_smb2_rsp_status()
ksmbd: not allow to open file if delelete on close bit is set
|
|
Pull smb client fixes from Steve French:
- fix caching race with open_cached_dir and laundromat cleanup of
cached dirs (addresses a problem spotted with xfstest run with
directory leases enabled)
- reduce excessive resource usage of laundromat threads
* tag '6.6-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: prevent new fids from being removed by laundromat
smb: client: make laundromat a delayed worker
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix a false-positive KASAN warning, fix an AMD erratum on Zen4 CPUs,
and fix kernel-doc build warnings"
* tag 'x86-urgent-2023-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Disable KASAN in apply_alternatives()
x86/cpu: Fix AMD erratum #1485 on Zen4-based CPUs
x86/resctrl: Fix kernel-doc warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Two EEVDF fixes"
* tag 'sched-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/eevdf: Fix pick_eevdf()
sched/eevdf: Fix min_deadline heap integrity
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf event fix from Ingo Molnar:
"Fix an LBR sampling bug"
* tag 'perf-urgent-2023-10-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Filter vsyscall addresses
|
|
Kernel v6.5 converted overlayfs to new mount api.
As an added bonus, it also added a feature to allow appending lowerdirs
using lowerdir=:/lower2,lowerdir=::/data3 syntax.
This new syntax has raised some concerns regarding escaping of colons.
We decided to try and disable this syntax, which hasn't been in the wild
for so long and introduce it again in 6.7 using explicit mount options
lowerdir+=/lower2,datadir+=/data3.
Suggested-by: Miklos Szeredi <[email protected]>
Link: https://lore.kernel.org/r/CAJfpegsr3A4YgF2YBevWa6n3=AcP7hNndG6EPMu3ncvV-AM71A@mail.gmail.com/
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <[email protected]>
|
|
Pull xfs fixes from Chandan Babu:
- Fix calculation of offset of AG's last block and its length
- Update incore AG block count when shrinking an AG
- Process free extents to busy list in FIFO order
- Make XFS report its i_version as the STATX_CHANGE_COOKIE
* tag 'xfs-6.6-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIE
xfs: Remove duplicate include
xfs: correct calculation for agend and blockcount
xfs: process free extents to busy list in FIFO order
xfs: adjust the incore perag block_count when shrinking
|
|
Before commit b36a5780cb44 ("ovl: modify layer parameter parsing"),
spaces and commas in lowerdir mount option value used to be escaped using
seq_show_option().
In current upstream, when lowerdir value has a space, it is not escaped
in /proc/mounts, e.g.:
none /mnt overlay rw,relatime,lowerdir=l l,upperdir=u,workdir=w 0 0
which results in broken output of the mount utility:
none on /mnt type overlay (rw,relatime,lowerdir=l)
Store the original lowerdir mount options before unescaping and show
them using the same escaping used for seq_show_option() in addition to
escaping the colon separator character.
Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing")
Signed-off-by: Amir Goldstein <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a reworked way for handling reset delay on SMBus-connected Synaptics
touchpads (the original one, while being correct, uncovered an old
bug in fallback to PS/2 code that was fixed separately; the new one
however avoids having delay in serio port "fast" resume, and instead
has the wait in the RMI4 code)
- a fix for potential crashes when devices with Elan controllers (and
Synaptics) fall back to PS/2 code. Can't be hit without the original
patch above, but still good to have it fixed
- a couple new device IDs in xpad Xbox driver
- another quirk for Goodix driver to deal with stuff vendors put in
ACPI tables
- a fix for use-after-free on disconnect for powermate driver
- a quirk to not initialize PS/2 mouse port on Fujitsu Lifebook E5411
laptop as it makes keyboard not usable and the device uses
hid-over-i2c touchpad anyways
* tag 'input-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: powermate - fix use-after-free in powermate_config_complete
Input: xpad - add PXN V900 support
Input: synaptics-rmi4 - handle reset delay when using SMBus trsnsport
Input: psmouse - fix fast_reconnect function for PS/2 mode
Revert "Input: psmouse - add delay when deactivating for SMBus mode"
Input: goodix - ensure int GPIO is in input for gpio_count == 1 && gpio_int_idx == 0 case
Input: i8042 - add Fujitsu Lifebook E5411 to i8042 quirk table
Input: xpad - add HyperX Clutch Gladiate Support
|
|
syzbot has found a use-after-free bug [1] in the powermate driver. This
happens when the device is disconnected, which leads to a memory free from
the powermate_device struct. When an asynchronous control message
completes after the kfree and its callback is invoked, the lock does not
exist anymore and hence the bug.
Use usb_kill_urb() on pm->config to cancel any in-progress requests upon
device disconnection.
[1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e
Signed-off-by: Javier Carrasco <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/r/20230916-topic-powermate_use_after_free-v3-1-64412b81a7a2@gmail.com
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.
Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.
Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.
Cc: Luiz Augusto von Dentz <[email protected]>
Cc: Edward AD <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: Johan Hedberg <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: [email protected]
Cc: [email protected]
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
bacmp() is a wrapper around memcpy(), which contain compile-time
checks for buffer overflow. Since the hci_conn_request_evt() also calls
bt_dev_dbg() with an implicit NULL pointer check, the compiler is now
aware of a case where 'hdev' is NULL and treats this as meaning that
zero bytes are available:
In file included from net/bluetooth/hci_event.c:32:
In function 'bacmp',
inlined from 'hci_conn_request_evt' at net/bluetooth/hci_event.c:3276:7:
include/net/bluetooth/bluetooth.h:364:16: error: 'memcmp' specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
364 | return memcmp(ba1, ba2, sizeof(bdaddr_t));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add another NULL pointer check before the bacmp() to ensure the compiler
understands the code flow enough to not warn about it. Since the patch
that introduced the warning is marked for stable backports, this one
should also go that way to avoid introducing build regressions.
Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Cc: Kees Cook <[email protected]>
Cc: "Lee, Chun-Yi" <[email protected]>
Cc: Luiz Augusto von Dentz <[email protected]>
Cc: Marcel Holtmann <[email protected]>
Cc: [email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
When accessing hdev->name, the actual string length should prevail
Reported-by: [email protected]
Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings")
Signed-off-by: Edward AD <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
If CONFIG_DEV_COREDUMP was not set, it would return -EOPNOTSUPP for
hci_devcd_register().
In this commit, ignore error return for hci_devcd_register().
Otherwise Bluetooth initialization will be failed.
Fixes: 044014ce85a1 ("Bluetooth: btrtl: Add Realtek devcoredump support")
Cc: [email protected]
Reported-by: Kirill A. Shutemov <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/T/
Signed-off-by: Max Chou <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
This fixes the following code style problem:
ERROR: that open brace { should be on the previous line
+ if (!bacmp(&hdev->bdaddr, &ev->bdaddr))
+ {
Fixes: 1ffc6f8cc332 ("Bluetooth: Reject connection with the device which has same BD_ADDR")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
memcmp is not consider safe to use with cryptographic secrets:
'Do not use memcmp() to compare security critical data, such as
cryptographic secrets, because the required CPU time depends on the
number of equal bytes.'
While usage of memcmp for ZERO_KEY may not be considered a security
critical data, it can lead to more usage of memcmp with pairing keys
which could introduce more security problems.
Fixes: 455c2ff0a558 ("Bluetooth: Fix BR/EDR out-of-band pairing with only initiator data")
Fixes: 33155c4aae52 ("Bluetooth: hci_event: Ignore NULL link key")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2023-10-12
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2023-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix VF representors reporting zero counters to "ip -s" command
net/mlx5e: Don't offload internal port if filter device is out device
net/mlx5e: Take RTNL lock before triggering netdev notifiers
net/mlx5e: XDP, Fix XDP_REDIRECT mpwqe page fragment leaks on shutdown
net/mlx5e: RX, Fix page_pool allocation failure recovery for legacy rq
net/mlx5e: RX, Fix page_pool allocation failure recovery for striding rq
net/mlx5: Handle fw tracer change ownership event based on MTRC
net/mlx5: Bridge, fix peer entry ageing in LAG mode
net/mlx5: E-switch, register event handler before arming the event
net/mlx5: Perform DMA operations in the right locations
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add VID and PID to the xpad_device table to allow driver to use the PXN
V900 steering wheel, which is XTYPE_XBOX360 compatible in xinput mode.
Signed-off-by: Matthias Berndt <[email protected]>
Link: https://lore.kernel.org/r/4932699.31r3eYUQgx@fedora
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57f7 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <[email protected]>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
When the SMBus connection is attempted psmouse_smbus_init() sets
the fast_reconnect pointer to psmouse_smbus_reconnecti(). If SMBus
initialization fails, elantech_setup_ps2() and synaptics_init_ps2() will
fallback to PS/2 mode, replacing the psmouse private data. This can cause
issues on resume, since psmouse_smbus_reconnect() expects to find an
instance of struct psmouse_smbus_dev in psmouse->private.
The issue was uncovered when in 92e24e0e57f7 ("Input: psmouse - add
delay when deactivating for SMBus mode") psmouse_smbus_reconnect()
started attempting to use more of the data structure. The commit was
since reverted, not because it was at fault, but because there was found
a better way of doing what it was attempting to do.
Fix the problem by resetting the fast_reconnect pointer in psmouse
structure in elantech_setup_ps2() and synaptics_init_ps2() when the PS/2
mode is used.
Reported-by: Thorsten Leemhuis <[email protected]>
Tested-by: Thorsten Leemhuis <[email protected]>
Signed-off-by: Jeffery Miller <[email protected]>
Fixes: bf232e460a35 ("Input: psmouse-smbus - allow to control psmouse_deactivate")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2023-10-11 (i40e, ice)
This series contains fixes for the i40e and ice drivers.
Jesse adds handling to the ice driver which resetis the device when loading
on a crash kernel, preventing stale transactions from causing machine check
exceptions which could prevent capturing crash data.
Mateusz fixes a bug in the ice driver 'Safe mode' logic for handling the
device when the DDP is missing.
Michal fixes a crash when probing the i40e driver in the event that HW
registers are reporting invalid/unexpected values.
The following are changes since commit a950a5921db450c74212327f69950ff03419483a:
net/smc: Fix pos miscalculation in statistics
I'm covering for Tony Nguyen while he's out, and don't have access to create
a pull request branch on his net-queue, so these are sent via mail only.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
One thing is broken in the safe mode, that is
ice_deinit_features() is being executed even
that ice_init_features() was not causing stack
trace during pci_unregister_driver().
Add check on the top of the function.
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Mateusz Pacuszka <[email protected]>
Signed-off-by: Jan Sokolowski <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the system boots into the crash dump kernel after a panic, the ice
networking device may still have pending transactions that can cause errors
or machine checks when the device is re-enabled. This can prevent the crash
dump kernel from loading the driver or collecting the crash data.
To avoid this issue, perform a function level reset (FLR) on the ice device
via PCIe config space before enabling it on the crash kernel. This will
clear any outstanding transactions and stop all queues and interrupts.
Restore the config space after the FLR, otherwise it was found in testing
that the driver wouldn't load successfully.
The following sequence causes the original issue:
- Load the ice driver with modprobe ice
- Enable SR-IOV with 2 VFs: echo 2 > /sys/class/net/eth0/device/sriov_num_vfs
- Trigger a crash with echo c > /proc/sysrq-trigger
- Load the ice driver again (or let it load automatically) with modprobe ice
- The system crashes again during pcim_enable_device()
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Reported-by: Vishal Agrawal <[email protected]>
Reviewed-by: Jay Vosburgh <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The hardware provides the indexes of the first and the last available
queue and VF. From the indexes, the driver calculates the numbers of
queues and VFs. In theory, a faulty device might say the last index is
smaller than the first index. In that case, the driver's calculation
would underflow, it would attempt to write to non-existent registers
outside of the ioremapped range and crash.
I ran into this not by having a faulty device, but by an operator error.
I accidentally ran a QE test meant for i40e devices on an ice device.
The test used 'echo i40e > /sys/...ice PCI device.../driver_override',
bound the driver to the device and crashed in one of the wr32 calls in
i40e_clear_hw.
Add checks to prevent underflows in the calculations of num_queues and
num_vfs. With this fix, the wrong device probing reports errors and
returns a failure without crashing.
Fixes: 838d41d92a90 ("i40e: clear all queues and interrupts")
Signed-off-by: Michal Schmidt <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
Patch 1, from Pablo Neira Ayuso, fixes a performance regression
(since 6.4) when a large pending set update has to be canceled towards
the end of the transaction.
Patch 2 from myself, silences an incorrect compiler warning reported
with a few (older) compiler toolchains.
Patch 3, from Kees Cook, adds __counted_by annotation to
nft_pipapo set backend type. I took this for net instead of -next
given infra is already in place and no actual code change is made.
Patch 4, from Pablo Neira Ayso, disables timeout resets on
stateful element reset. The rest should only affect internal object
state, e.g. reset a quota or counter, but not affect a pending timeout.
Patches 5 and 6 fix NULL dereferences in 'inner header' match,
control plane doesn't test for netlink attribute presence before
accessing them. Broken since feature was added in 6.2, fixes from
Xingyuan Mo.
Last patch, from myself, fixes a bogus rule match when skb has
a 0-length mac header, in this case we'd fetch data from network
header instead of canceling rule evaluation. This is a day 0 bug,
present since nftables was merged in 3.13.
* tag 'nf-23-10-12' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix wrong mac header matching
nf_tables: fix NULL pointer dereference in nft_expr_inner_parse()
nf_tables: fix NULL pointer dereference in nft_inner_init()
netfilter: nf_tables: do not refresh timeout when resetting element
netfilter: nf_tables: Annotate struct nft_pipapo_match with __counted_by
netfilter: nfnetlink_log: silence bogus compiler warning
netfilter: nf_tables: do not remove elements if set backend implements .abort
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ICSSG HW stats on TX side considers 8 preamble bytes as data bytes. Due
to this the tx_bytes of ICSSG interface doesn't match the rx_bytes of the
link partner. There is no public errata available yet.
As a workaround to fix this, decrease tx_bytes by 8 bytes for every tx
frame.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Update the "How are representors identified?" documentation
subchapter. For newer kernels driver should use
SET_NETDEV_DEVLINK_PORT instead of ndo_get_devlink_port()
callback.
Fixes: 7712b3e966ea ("Merge branch 'net-fix-netdev-to-devlink_port-linkage-and-expose-to-user'")
Signed-off-by: Mateusz Polchlopek <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Edward Cree <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make sure that the command values used for replies are correct. This is
only affecting generated userspace helpers, no change on kernel code.
Fixes: 7199c86247e9 ("netlink: specs: devlink: add commands that do per-instance dump")
Signed-off-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If the netdevice is within a container and communicates externally
through network technologies such as VxLAN, we won't be able to find
routing information in the init_net namespace. To address this issue,
we need to add a struct net parameter to the smc_ib_find_route function.
This allow us to locate the routing information within the corresponding
net namespace, ensuring the correct completion of the SMC CLC interaction.
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Albert Huang <[email protected]>
Reviewed-by: Dust Li <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <[email protected]>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since the introduction of the ice driver the code has been
double-shifting the RSS enabling field, because the define already has
shifts in it and can't have the regular pattern of "a << shiftval &
mask" applied.
Most places in the code got it right, but one line was still wrong. Fix
this one location for easy backports to stable. An in-progress patch
fixes the defines to "standard" and will be applied as part of the
regular -next process sometime after this one.
Fixes: d76a60ba7afb ("ice: Add support for VLANs and offloads")
Reviewed-by: Przemek Kitszel <[email protected]>
CC: [email protected]
Signed-off-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In bcm_sf2_mdio_register(), the class_find_device() will call get_device()
to increment reference count for priv->master_mii_bus->dev if
of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register()
fails, it will call get_device() twice without decrement reference count
for the device. And it is the same if bcm_sf2_mdio_register() succeeds but
fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the
reference count has not decremented to zero, the dev related resource will
not be freed.
So remove the get_device() in bcm_sf2_mdio_register(), and call
put_device() if mdiobus_alloc() or mdiobus_register() fails and in
bcm_sf2_mdio_unregister() to solve the issue.
And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and
just return 0 if it succeeds to make it cleaner.
Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus")
Signed-off-by: Jinjie Ruan <[email protected]>
Suggested-by: Simon Horman <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ido Schimmel says:
====================
selftests: fib_tests: Fixes for multipath list receive tests
Fix two issues in recently added FIB multipath list receive tests.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The tests rely on the IPv{4,6} FIB trace points being triggered once for
each forwarded packet. If receive processing is deferred to the
ksoftirqd task these invocations will not be counted and the tests will
fail. Fix by specifying the '-a' flag to avoid perf from filtering on
the mausezahn task.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.68) [FAIL]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.27) [FAIL]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.00) [ OK ]
# ./fib_tests.sh -t ipv6_mpath_list
IPv6 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859c0 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Tested-by: kernel test robot <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Tested-by: Sriram Yagnaraman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test relies on the fib:fib_table_lookup trace point being triggered
once for each forwarded packet. If RP filter is not disabled, the trace
point will be triggered twice for each packet (for source validation and
forwarding), potentially masking actual bugs. Fix by explicitly
disabling RP filter.
Before:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (1.99) [ OK ]
After:
# ./fib_tests.sh -t ipv4_mpath_list
IPv4 multipath list receive tests
TEST: Multipath route hit ratio (.99) [ OK ]
Fixes: 8ae9efb859c0 ("selftests: fib_tests: Add multipath list receive tests")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Tested-by: kernel test robot <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Tested-by: Sriram Yagnaraman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|