aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-21[media] cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID ↵Igor M. Liplianin1-3/+5
filter It takes too long time to scan due to low symbol rate PID's like PAT, PMT, CAT, NIT. For that matter we enabled permanently all PID's less 0x20 in hardware PID filter for NetUP Dual DVB-T/C CI RF card to combine rates. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: disable MSI for NetUP cards, otherwise CI is not workingIgor M. Liplianin2-0/+5
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: implement num_fds_portb, num_fds_portc parameters for ↵Igor M. Liplianin3-0/+9
cx23885_board structure This is needed for multifrontend support. NetUP Dual DVB-T/C CI RF card has frontends connected to port B & C Each frontend has two switchable cores - DVB-T & DVB-C Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] cx23885: implement tuner_bus parameter for cx23885_board structureIgor M. Liplianin4-5/+14
There is two external I2C buses in cx23885 chip. Currently, analog tuners supported for second I2C bus only In NetUP Dual DVB-T/C CI RF card tuners connected to first bus So, in order to support analog tuners sitting on first bus we need modifications. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Initial commit to support NetUP Dual DVB-T/C CI RF cardIgor M. Liplianin6-22/+286
The card based on cx23885 PCI-e brige. Altera FPGA for CI, multistandard demods stv0367 from STM for QAM & OFDM, Xcieve xc5000 tuners and additional cx25840 for second analog input. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] xc5000: add support for DVB-C tuningIgor M. Liplianin1-0/+18
Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Support for stv0367 multi-standard demodulatorIgor M. Liplianin6-0/+7341
The STV0367 is a multi-standard demodulator which is capable of processing DVB-T as well as DVB-C signals. It is fully compliant with DVB-T and DVB-C recommendations for broadcast services. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Altera FPGA based CI driver moduleIgor M. Liplianin4-0/+942
An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] Altera FPGA firmware download moduleIgor M. Liplianin11-0/+3968
It uses STAPL files and programs Altera FPGA through JTAG. Interface to JTAG must be provided from main device module, for example through cx23885 GPIO. Signed-off-by: Igor M. Liplianin <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] video/cx231xx: Fix sparse warning: Using plain integer as NULL pointerPeter Huewe2-10/+10
This patch fixes the warning "Using plain integer as NULL pointer", generated by sparse, by replacing the offending 0s with NULL. Signed-off-by: Peter Huewe <[email protected]> Reviewed-by: Devin Heitmueller <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: Initial submit of OV9740 driverAndrew Chew4-0/+1017
This soc_camera driver is for Omnivision's OV9740 sensor. This initial submission provides support for YUV422 output at 1280x720 (720p), which is the sensor's native resolution. 640x480 (VGA) is also supported, with cropping and scaling performed by the sensor's ISP. This driver is heavily based off of the existing OV9640 driver. Signed-off-by: Andrew Chew <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4l: sh_mobile_ceu_camera: fix cropping offset calculationGuennadi Liakhovetski1-8/+4
Use the correct scales to calculate cropping offsets. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: convert to videobuf2Guennadi Liakhovetski1-204/+141
Now that soc-camera supports videobuf API v1 and v2, camera-host drivers can be converted to videobuf2 individually. This patch converts the mx3_camera driver. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: sh_mobile_ceu_camera: convert to videobuf2Guennadi Liakhovetski2-154/+112
Convert the sh_mobile_ceu_camera driver to the videobuf2 API. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: add helper functions for videobuf queue handlingGuennadi Liakhovetski1-0/+10
Add two helper inline functions to retrieve soc-camera device context from videobuf and videobuf2 queue pointers. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: extend to also support videobuf2Guennadi Liakhovetski3-18/+84
Extend soc-camera core to also support the videobuf2 API. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: add missing EXPORT_SYMBOL* statements to vb2Guennadi Liakhovetski1-0/+3
videobuf2-memops and videobuf2-core can be compiled as modules, in which case 3 more symbols from videobuf2-memops.c have to be exported. Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: omap1_camera: join split format linesGuennadi Liakhovetski1-31/+31
Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: fix capture issues for non 8-bit per pixel formatsAlberto Panizzo1-14/+50
If the camera was set to output formats like RGB565 YUYV or SBGGR10, the resulting image was scrambled due to erroneous interpretations of horizontal parameter's units. This patch in fourcc_to_ipu_pix, eliminate also the pixel formats mappings that, first are not used within mainline code and second, standing at the datasheets, they will not work properly: The IPU internal bus support only the following data formatting (44.1.1.3 Data Flows and Formats): 1 YUV 4:4:4 or RGB-8 bits per color component 2 YUV 4:4:4 or RGB-10 bits per color component 3 Generic data (from sensor to the system memory only) And format conversions are done: - from memory: unpacking from other formats to IPU supported ones - to memory: packing in the inverse order. So, assigning a packing/unpacking strategy to the IPU for those formats will produce a packing to memory and not the inverse. Signed-off-by: Alberto Panizzo <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: mx3_camera: correct 'sizeimage' value reportingAnatolij Gustschin1-0/+6
The 'pix->width' field may be updated in mx3_camera_set_fmt() to fulfill the IPU stride line alignment requirements. If this update takes place, the 'fmt.pix.sizeimage' field in the struct v4l2_format stucture returned by VIDIOC_S_FMT is wrong. We need to update the 'pix->sizeimage' field in the mx3_camera_set_fmt() function to fix this issue. Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: omap1_camera: fix use after freeMathias Krause1-2/+2
Even though clk_put() is a no-op on most architectures it is not for some ARM implementations. To not fail on those, release the clock timer before freeing the surrounding structure. This bug was spotted by the semantic patch tool coccinelle using the script found at scripts/coccinelle/free/kfree.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Mathias Krause <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc_mediabus: add a method to obtain the number of samples per ↵Alberto Panizzo2-0/+15
pixel Add a function to calculate the number of samples on the media-bus, required to retrieve one pixel of a certain format. Signed-off-by: Alberto Panizzo <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: start stream after queueing the buffersAnatolij Gustschin1-2/+2
Some camera systems have strong requirement for capturing an exact number of frames after starting the stream and do not tolerate losing captured frames. By starting the stream after the videobuf has queued the buffers, we ensure that no frame will be lost. Signed-off-by: Anatolij Gustschin <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: soc-camera: add enum-frame-size ioctlQing Xu2-0/+38
add vidioc_enum_framesizes implementation, follow default_g_parm() and g_mbus_fmt() method Signed-off-by: Qing Xu <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] V4L: add enum_mbus_fsizes video operationQing Xu1-0/+2
Add enum_mbus_fsizes V4L2 subdevice video operation. Signed-off-by: Qing Xu <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] saa7134-empress: add missing MPEG controlsHans Verkuil1-0/+4
Reported by, and based on a patch from, Martin Dauskardt. The AUDIO_AC3_BITRATE control is still missing from this list, but such optional controls are a bit hard to handle. This will be fixed automatically when we switch to the control framework. Signed-off-by: Hans Verkuil <[email protected]> Reported-by: Martin Dauskardt <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] firedtv: remove obsolete ieee1394 backend codeHans Verkuil6-331/+3
drivers/ieee1394/ has been removed in Linux 2.6.37. The corresponding backend code in firedtv is no longer built in now and can be deleted. Firedtv continues to work with drivers/firewire/. Also, fix a Kconfig menu comment: Removal of CONFIG_IEEE1394 made the "Supported FireWire (IEEE 1394) Adapters" comment disappear; bring it back with corrected dependency. Signed-off-by: Hans Verkuil <[email protected]> Reviewed-by: Stefan Richter <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] v4l: removal of old, obsolete ioctlsHans Verkuil6-90/+0
Some ioctl's were defined wrong on 2.6.2 and 2.6.6, using the wrong type of R/W arguments. They were fixed, but the old ioctl names are still there, maintained to avoid breaking binary compatibility: There's no sense on preserving those forever, as it is very doubtful that someone would try to use a such old binary with a modern kernel. Removing them will allow us to remove some magic done at the V4L ioctl handler. Note that any application compiled with a videodev2.h from 2.6.7 or later will be using the correct ioctls. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] dabusb: remove obsolete driverHans Verkuil7-1023/+0
The dabusb driver was conceived as an experimental driver for a test device. The driver never supported any shipped product, and, while there were some updates for it in 2003, for an ancient product, those changes were never submitted upstream. Also, there's no DocBook for its API, nor any upstream discussion. So it was decided to remove it in 2.6.39. Future support for a DAB API should be discussed on the linux-media list first. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] se401: remove last V4L1 driverHans Verkuil9-2083/+0
This driver is for obsolete hardware that the old maintainer didn't care (or not have the hardware anymore), and that no other developer could find any hardware to buy. The V4L1 API is no longer supported, and since nobody stepped in to convert them to V4L2 the decision was made to remove them. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] staging-usbvideo: removeHans de Goede9-3920/+0
With the new gspca v4l2 vicam driver, there is no more reason to keep the old v4l1 usbvideo vicam driver around, and since that is the last usbvideo framework using driver, the old usbvideo framework itself can go too. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_cpia1: Don't allow the framerate divisor to go above 2Hans de Goede1-3/+3
Having a framerate divisor of 3 is not really necesarry and leads to various troubles (frames going missing, compression issues) when allowed. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca: Add new vicam subdriverHans de Goede3-0/+393
This is a complete rewrite of the old v4l1 vicam subdriver, featuring multiple resolutions, gain + exposure control and still has less code. Oh and it is a v4l2 driver rather then v4l1 ofcourse :) Many thanks to Devin Heitmueller <[email protected]> for donating his 3com homeconnect to me, which made this rewrite possible. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_sn9c20x: Add another MSI laptop to the sn9c20x upside down listHans de Goede1-0/+7
Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_sn9c20x: Make buffers slightly larger for JPEG framesHans de Goede1-4/+4
In good lighting conditions (lots of details visible) the current buffers are sometimes too small. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_sn9c20x: Add LED_REVERSE flag for 0c45:62bbHans de Goede1-1/+1
This fixes the led not working on this camera Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_sn9c20x: Add hflip and vflip controls for the ov7660 sensorHans de Goede1-3/+13
Tested with a camera with usb-id: 0c45:62bb Also enable dmi based flopped laptop detection for the 0c45:627b ov7660 model. Some of the MSI laptops with upside down camera have this one instead of the 0c45:624f. Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca_sn9c20x: Fix colored borders with ov7660 sensorHans de Goede1-2/+5
Tested with a camera with usb-id: 0c45:62bb Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] tm6000: relabeling any registersStefan Ringel1-25/+39
relabeling any registers Signed-off-by: Stefan Ringel <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - ov519: Add the 800x600 resolution for sensors ov2610/2610aeJean-François Moine1-0/+23
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - ov519: Add the sensor ov2610aeJean-François Moine1-5/+62
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj: The pin S_PWR_DN is inverted for sensor mi0360Jean-François Moine1-1/+1
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - ov534: Add saturation control for ov767xJean-François Moine1-0/+37
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - ov534: Add the webcam 06f8:3002 and sensor ov767xJean-François Moine2-60/+459
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - ov534: Use the new control mechanismJean-François Moine1-342/+113
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj, zc3xx: Let some bandwidth for audio when USB 1.1Jean-François Moine2-0/+8
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj: Set both pins for infrared of mt9v111 webcamsJean-François Moine1-14/+5
This avoids to define the webcam model. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj: Same init for all bridges but the sn9c102pJean-François Moine1-7/+1
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj: Simplify GPIO setting when audio presentJean-François Moine1-2/+3
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2011-03-21[media] gspca - sonixj: Adjust autogain for sensor mt9v111Jean-François Moine1-6/+9
The gain/expo adjustment was too long. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.