Age | Commit message (Collapse) | Author | Files | Lines |
|
The alloc_pkey() sefltest function wraps the sys_pkey_alloc() system call.
On success, it updates its "shadow" register value because
sys_pkey_alloc() updates the real register.
But, the success check is wrong. pkey_alloc() considers any non-zero
return code to indicate success where the pkey register will be modified.
This fails to take negative return codes into account.
Consider only a positive return value as a successful call.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 5f23f6d082a9 ("x86/pkeys: Add self-tests")
Reported-by: Thomas Gleixner <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Tested-by: Aneesh Kumar K.V <[email protected]>
Cc: Ram Pai <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Florian Weimer <[email protected]>
Cc: "Desnes A. Nunes do Rosario" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thiago Jung Bauermann <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Suchanek <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "selftests/vm/pkeys: Bug fixes and a new test".
There has been a lot of activity on the x86 front around the XSAVE
architecture which is used to context-switch processor state (among other
things). In addition, AMD has recently joined the protection keys club by
adding processor support for PKU.
The AMD implementation helped uncover a kernel bug around the PKRU "init
state", which actually applied to Intel's implementation but was just
harder to hit. This series adds a test which is expected to help find
this class of bug both on AMD and Intel. All the work around pkeys on x86
also uncovered a few bugs in the selftest.
This patch (of 4):
The "random" pkey allocation code currently does the good old:
srand((unsigned int)time(NULL));
*But*, it unfortunately does this on every random pkey allocation.
There may be thousands of these a second. time() has a one second
resolution. So, each time alloc_random_pkey() is called, the PRNG is
*RESET* to time(). This is nasty. Normally, if you do:
srand(<ANYTHING>);
foo = rand();
bar = rand();
You'll be quite guaranteed that 'foo' and 'bar' are different. But, if
you do:
srand(1);
foo = rand();
srand(1);
bar = rand();
You are quite guaranteed that 'foo' and 'bar' are the *SAME*. The recent
"fix" effectively forced the test case to use the same "random" pkey for
the whole test, unless the test run crossed a second boundary.
Only run srand() once at program startup.
This explains some very odd and persistent test failures I've been seeing.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 6e373263ce07 ("selftests/vm/pkeys: fix alloc_random_pkey() to make it really random")
Signed-off-by: Dave Hansen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Aneesh Kumar K.V <[email protected]>
Cc: Ram Pai <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Florian Weimer <[email protected]>
Cc: "Desnes A. Nunes do Rosario" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Thiago Jung Bauermann <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Suchanek <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Until now no compiler supported an attribute to disable coverage
instrumentation as used by KCOV.
To work around this limitation on x86, noinstr functions have their
coverage instrumentation turned into nops by objtool. However, this
solution doesn't scale automatically to other architectures, such as
arm64, which are migrating to use the generic entry code.
Clang [1] and GCC [2] have added support for the attribute recently.
[1] https://github.com/llvm/llvm-project/commit/280333021e9550d80f5c1152a34e33e81df1e178
[2] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=cec4d4a6782c9bd8d071839c50a239c49caca689
The changes will appear in Clang 13 and GCC 12.
Add __no_sanitize_coverage for both compilers, and add it to noinstr.
Note: In the Clang case, __has_feature(coverage_sanitizer) is only true if
the feature is enabled, and therefore we do not require an additional
defined(CONFIG_KCOV) (like in the GCC case where __has_attribute(..) is
always true) to avoid adding redundant attributes to functions if KCOV is
off. That being said, compilers that support the attribute will not
generate errors/warnings if the attribute is redundantly used; however,
where possible let's avoid it as it reduces preprocessed code size and
associated compile-time overheads.
[[email protected]: Implement __has_feature(coverage_sanitizer) in Clang]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: add comment explaining __has_feature() in Clang]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Marco Elver <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Luc Van Oostenryck <[email protected]>
Cc: Arvind Sankar <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Sami Tolvanen <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Delete NULL check, all callers pass valid pointer.
Delete ->load_binary check -- failure to provide hook in a custom module
will be very noticeable at the very first execve call.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
won't be abandoned
Currently we handle SS_AUTODISARM as soon as we have stored the altstack
settings into sigframe - that's the point when we have set the things up
for eventual sigreturn to restore the old settings. And if we manage to
set the sigframe up (we are not done with that yet), everything's fine.
However, in case of failure we end up with sigframe-to-be abandoned and
SIGSEGV force-delivered. And in that case we end up with inconsistent
rules - late failures have altstack reset, early ones do not.
It's trivial to get consistent behaviour - just handle SS_AUTODISARM once
we have set the sigframe up and are committed to entering the handler,
i.e. in signal_delivered().
Link: https://lore.kernel.org/lkml/[email protected]/
Link: https://github.com/ClangBuiltLinux/linux/issues/876
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Al Viro <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The create_date field of inode in hfsplus is corresponding to
kstat.btime and could be reported in statx.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Chung-Chiang Cheng <[email protected]>
Reviewed-by: Viacheslav Dubeyko <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The continue statement at the end of the while-loop is redundant,
remove it.
Addresses-Coverity: ("Continue has no effect")
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Ryusuke Konishi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
free_insn_page() in x86 and s390 is same with the common weak function in
kernel/kprobes.c. Plus, the comment "Recover page to RW mode before
releasing it" in x86 seems insensible to be there since resetting mapping
is done by common code in vfree() of module_memfree(). So drop these two
duplicated strong functions and related comment, then mark the common one
in kernel/kprobes.c strong.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Barry Song <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Acked-by: Heiko Carstens <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: "Naveen N. Rao" <[email protected]>
Cc: Anil S Keshavamurthy <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Qi Liu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
It is easy to foobar setting a kernel parameter on the command line
without realizing it, there's not much output that you can use to assess
what the kernel did with that parameter by default.
Make it a little more explicit which parameters on the command line
_looked_ like a valid parameter for the kernel, but did not match anything
and ultimately got tossed to init. This is very similar to the unknown
parameter message received when loading a module.
This assumes the parameters are processed in a normal fashion, some
parameters (dyndbg= for example) don't register their parameter with the
rest of the kernel's parameters, and therefore always show up in this list
(and are also given to init - like the rest of this list).
Another example is BOOT_IMAGE= is highlighted as an offender, which it
technically is, but is passed by LILO and GRUB so most systems will see
that complaint.
An example output where "foobared" and "unrecognized" are intentionally
invalid parameters:
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.12-dirty debug log_buf_len=4M foobared unrecognized=foo
Unknown command line parameters: foobared BOOT_IMAGE=/boot/vmlinuz-5.12-dirty unrecognized=foo
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andrew Halaney <[email protected]>
Suggested-by: Steven Rostedt <[email protected]>
Suggested-by: Borislav Petkov <[email protected]>
Acked-by: Borislav Petkov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
checkpatch complains about positive return values of poll functions.
Example:
WARNING: return of an errno should typically be negative (ie: return -EPOLLIN)
+ return EPOLLIN;
Poll functions return positive values. The defines for the return values
of poll functions all start with EPOLL, resulting in a number of false
positives. An often used workaround is to assign poll function return
values to variables and returning that variable, but that is a less than
perfect solution.
There is no error definition which starts with EPOLL, so it is safe to
omit the warning for return values starting with EPOLL.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Acked-by: Joe Perches <[email protected]>
Cc: Ricardo Ribalda <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
checkpatch identifies a label only when a terminating colon
immediately follows an identifier.
Bitfield definitions can appear to be labels so ignore any
spaces between the identifier terminating colon and any digit
that may be used to define a bitfield length.
Miscellanea:
o Improve the initial checkpatch comment
o Use the more typical '&&' instead of 'and'
o Require the initial label character to be a non-digit
(Can't use $Ident here because $Ident allows ## concatenation)
o Use $sline instead of $line to ignore comments
o Use '$sline !~ /.../' instead of '!($line =~ /.../)'
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Joe Perches <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Manikishan Ghantasala <[email protected]>
Cc: Alex Elder <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Since commit d0259c42abff ("spdxcheck.py: Use Python 3"), spdxcheck.py
explicitly expects to run as python3 script. If "python" still points to
python v2.7 and the script is executed with "python scripts/spdxcheck.py",
the following error may be seen even if git-python is installed for
python3.
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 10, in <module>
import git
ImportError: No module named git
To fix the problem, check for the existence of python3, check if
the script is executable and not just for its existence, and execute
it directly.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Cc: Joe Perches <[email protected]>
Cc: Bert Vermeulen <[email protected]>
Cc: Dwaipayan Ray <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
lz4 compatible decompressor is simple. The format is underspecified and
relies on EOF notification to determine when to stop. Initramfs buffer
format[1] explicitly states that it can have arbitrary number of zero
padding. Thus when operating without a fill function, be extra careful to
ensure that sizes less than 4, or apperantly empty chunksizes are treated
as EOF.
To test this I have created two cpio initrds, first a normal one,
main.cpio. And second one with just a single /test-file with content
"second" second.cpio. Then i compressed both of them with gzip, and with
lz4 -l. Then I created a padding of 4 bytes (dd if=/dev/zero of=pad4 bs=1
count=4). To create four testcase initrds:
1) main.cpio.gzip + extra.cpio.gzip = pad0.gzip
2) main.cpio.lz4 + extra.cpio.lz4 = pad0.lz4
3) main.cpio.gzip + pad4 + extra.cpio.gzip = pad4.gzip
4) main.cpio.lz4 + pad4 + extra.cpio.lz4 = pad4.lz4
The pad4 test-cases replicate the initrd load by grub, as it pads and
aligns every initrd it loads.
All of the above boot, however /test-file was not accessible in the initrd
for the testcase #4, as decoding in lz4 decompressor failed. Also an
error message printed which usually is harmless.
Whith a patched kernel, all of the above testcases now pass, and
/test-file is accessible.
This fixes lz4 initrd decompress warning on every boot with grub. And
more importantly this fixes inability to load multiple lz4 compressed
initrds with grub. This patch has been shipping in Ubuntu kernels since
January 2021.
[1] ./Documentation/driver-api/early-userspace/buffer-format.rst
BugLink: https://bugs.launchpad.net/bugs/1835660
Link: https://lore.kernel.org/lkml/[email protected]/ # v0
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Dimitri John Ledkov <[email protected]>
Cc: Kyungsik Lee <[email protected]>
Cc: Yinghai Lu <[email protected]>
Cc: Bongkyu Kim <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Sven Schmidt <[email protected]>
Cc: Rajat Asthana <[email protected]>
Cc: Nick Terrell <[email protected]>
Cc: Gao Xiang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Declare LZ4_decompress_safe_withPrefix64k as static to fix sparse
warning:
> warning: symbol 'LZ4_decompress_safe_withPrefix64k' was not declared.
> Should it be static?
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Rajat Asthana <[email protected]>
Reviewed-by: Nick Terrell <[email protected]>
Cc: Gao Xiang <[email protected]>
Cc: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out kstrtox() and
simple_strtox() helpers.
At the same time convert users in header and lib folders to use new
header. Though for time being include new header back to kernel.h to
avoid twisted indirected includes for existing users.
[[email protected]: fix documentation references]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Cc: Francis Laniel <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Kars Mulder <[email protected]>
Cc: Trond Myklebust <[email protected]>
Cc: Anna Schumaker <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The test_string module can't be removed because it lacks an exit hook.
Since there is no reason for it to be permanent, add an empty one to allow
module removal.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Gcc inlines simple_strtoull() too agressively.
Given that all 4 signatures match, everything very efficiently calls or
tailcalls into simple_strtoull():
ffffffff81da0240 <simple_strtoll>:
ffffffff81da0240: 80 3f 2d cmp BYTE PTR [rdi],0x2d
ffffffff81da0243: 74 05 je ffffffff81da024a <simple_strtoll+0xa>
ffffffff81da0245: e9 76 ff ff ff jmp simple_strtoull
ffffffff81da024a: 48 83 c7 01 add rdi,0x1
ffffffff81da024e: e8 6d ff ff ff call simple_strtoull
ffffffff81da0253: 48 f7 d8 neg rax
ffffffff81da0256: c3 ret
Space savings (on F34-ish .config)
add/remove: 0/0 grow/shrink: 1/3 up/down: 52/-313 (-261)
Function old new delta
vsscanf 2167 2219 +52
simple_strtoul 72 2 -70
simple_strtoll 143 23 -120
simple_strtol 143 20 -123
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Generic version doesn't trucate second argument to char.
Older brother memchr() does as do s390, sparc and i386 assembly versions.
Fortunately, no code passes c >= 256.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexey Dobriyan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix some spelling mistakes in comments:
flaged ==> flagged
bufer ==> buffer
multipler ==> multiplier
MULTIPLER ==> MULTIPLIER
leaset ==> least
chnage ==> change
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhen Lei <[email protected]>
Cc: Herbert Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix some spelling mistakes in comments:
sentinal ==> sentinel
compresed ==> compressed
dependeny ==> dependency
immediatelly ==> immediately
dervied ==> derived
splitted ==> split
nore ==> not
independed ==> independent
asumed ==> assumed
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhen Lei <[email protected]>
Cc: Jiri Kosina <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Adds a number of test cases that cover a range of possible code paths.
[[email protected]: remove non-ascii characters, fix whitespace]
[[email protected]: fix spelling mistake "demominator" -> "denominator"]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Trent Piepho <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Daniel Latypov <[email protected]>
Cc: Oskar Schirmer <[email protected]>
Cc: Yiyuan Guo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If the input is out of the range of the allowed values, either larger than
the largest value or closer to zero than the smallest non-zero allowed
value, then a division by zero would occur.
In the case of input too large, the division by zero will occur on the
first iteration. The best result (largest allowed value) will be found by
always choosing the semi-convergent and excluding the denominator based
limit when finding it.
In the case of the input too small, the division by zero will occur on the
second iteration. The numerator based semi-convergent should not be
calculated to avoid the division by zero. But the semi-convergent vs
previous convergent test is still needed, which effectively chooses
between 0 (the previous convergent) vs the smallest allowed fraction (best
semi-convergent) as the result.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 323dd2c3ed0 ("lib/math/rational.c: fix possible incorrect result from rational fractions helper")
Signed-off-by: Trent Piepho <[email protected]>
Reported-by: Yiyuan Guo <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Cc: Oskar Schirmer <[email protected]>
Cc: Daniel Latypov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are no more users of the seq_escape_mem_ascii() followed by
string_escape_mem_ascii().
Remove them for good.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The seq_escape_mem_ascii() is completely non-flexible and shouldn't be
used. Replace it with properly called seq_escape_mem().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert seq_escape() to use seq_escape_str() rather than open coding it.
Note, for now we leave it as an exported symbol due to some old code that
can't tolerate ctype.h being (indirectly) included.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In some cases we want to escape characters from NULL-terminated strings.
Add seq_escape_str() as replica of string_escape_str() for that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Introduce seq_escape_mem() to allow users to pass additional parameters to
string_escape_mem().
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: Al Viro <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add myself as designated reviewer for generic string library.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
We have got new flags and hence new features of string_escape_mem().
Add test cases for that.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Terminators by definition shouldn't accept anything behind. Make them
robust by removing trailing commas.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Since flags are bitmapped, it's better to print them in hexadecimal
format.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Introduce a new flag to append additional characters, passed in 'only'
parameter, to be escaped if they fall in the corresponding class.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some users may want to have an ASCII based filter for printable only
characters, provided by conjunction of isascii() and isprint() functions.
Here is the addition of a such.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some users may want to have an ASCII based filter, provided by isascii()
function. Here is the addition of a such.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The only one conditional is left on the upper level, move the rest to the
same level and drop indentation level. No functional changes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Refactor code to have better readability by moving ESCAPE_NP handling
inside 'else' branch in the loop.
No functional change intended.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "lib/string_helpers: get rid of ugly *_escape_mem_ascii()", v3.
Get rid of ugly *_escape_mem_ascii() API since it's not flexible and has
the only single user. Provide better approach based on usage of the
string_escape_mem() with appropriate flags.
Test cases has been expanded accordingly to cover new functionality.
This patch (of 15):
Switch to use BIT() macro for flag definitions. No changes implied.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: "J. Bruce Fields" <[email protected]>
Cc: Chuck Lever <[email protected]>
Cc: Alexander Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The semicolon immediately following '}' is unneeded.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Zhen Lei <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[[email protected]: thread_info.h needs limits.h]
[[email protected]: ia64 fix]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Co-developed-by: Andrew Morton <[email protected]>
Acked-by: Mike Rapoport <[email protected]>
Acked-by: Corey Minyard <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Acked-by: Kees Cook <[email protected]>
Acked-by: Wei Liu <[email protected]>
Acked-by: Rasmus Villemoes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Sebastian Reichel <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Acked-by: Helge Deller <[email protected]> # parisc
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The ascii85.h is user of exactly two headers, i.e. math.h and types.h.
There is no need to carry on entire kernel.h.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Variable first is set to '0', but this value is never read as it is not
used later on, hence it is a redundant assignment and can be removed.
Clean up the following clang-analyzer warning:
kernel/sysctl.c:1562:4: warning: Value stored to 'first' is never read
[clang-analyzer-deadcode.DeadStores].
Link: https://lkml.kernel.org/r/1620469990-22182-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <[email protected]>
Reported-by: Abaci Robot <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Iurii Zaikin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
And 'ino' field to /proc/<pid>/fdinfo/<FD> and
/proc/<pid>/task/<tid>/fdinfo/<FD>.
The inode numbers can be used to uniquely identify DMA buffers in user
space and avoids a dependency on /proc/<pid>/fd/* when accounting
per-process DMA buffer sizes.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kalesh Singh <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Acked-by: Christian König <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Hridya Valsaraju <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Kalesh Singh <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Alexey Gladkov <[email protected]>
Cc: Szabolcs Nagy <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Bernd Edlinger <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: James Morris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Android captures per-process system memory state when certain low memory
events (e.g a foreground app kill) occur, to identify potential memory
hoggers. In order to measure how much memory a process actually consumes,
it is necessary to include the DMA buffer sizes for that process in the
memory accounting. Since the handle to DMA buffers are raw FDs, it is
important to be able to identify which processes have FD references to a
DMA buffer.
Currently, DMA buffer FDs can be accounted using /proc/<pid>/fd/* and
/proc/<pid>/fdinfo -- both are only readable by the process owner, as
follows:
1. Do a readlink on each FD.
2. If the target path begins with "/dmabuf", then the FD is a dmabuf FD.
3. stat the file to get the dmabuf inode number.
4. Read/ proc/<pid>/fdinfo/<fd>, to get the DMA buffer size.
Accessing other processes' fdinfo requires root privileges. This limits
the use of the interface to debugging environments and is not suitable for
production builds. Granting root privileges even to a system process
increases the attack surface and is highly undesirable.
Since fdinfo doesn't permit reading process memory and manipulating
process state, allow accessing fdinfo under PTRACE_MODE_READ_FSCRED.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kalesh Singh <[email protected]>
Suggested-by: Jann Horn <[email protected]>
Acked-by: Christian König <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Alexey Gladkov <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Bernd Edlinger <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Eric W. Biederman <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Hridya Valsaraju <[email protected]>
Cc: James Morris <[email protected]>
Cc: Jeff Vander Stoep <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Szabolcs Nagy <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use size_t when capping the count argument received by mem_rw(). Since
count is size_t, using min_t(int, ...) can lead to a negative value
that will later be passed to access_remote_vm(), which can cause
unexpected behavior.
Since we are capping the value to at maximum PAGE_SIZE, the conversion
from size_t to int when passing it to access_remote_vm() as "len"
shouldn't be a problem.
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: David Disseldorp <[email protected]>
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Signed-off-by: Marcelo Henrique Cerri <[email protected]>
Cc: Alexey Dobriyan <[email protected]>
Cc: Souza Cascardo <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Michel Lespinasse <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some NVIDIA GPUs do not support direct atomic access to system memory via
PCIe. Instead this must be emulated by granting the GPU exclusive access
to the memory. This is achieved by replacing CPU page table entries with
special swap entries that fault on userspace access.
The driver then grants the GPU permission to update the page undergoing
atomic access via the GPU page tables. When CPU access to the page is
required a CPU fault is raised which calls into the device driver via MMU
notifiers to revoke the atomic access. The original page table entries
are then restored allowing CPU access to proceed.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Call mmu_interval_notifier_insert() as part of nouveau_range_fault().
This doesn't introduce any functional change but makes it easier for a
subsequent patch to alter the behaviour of nouveau_range_fault() to
support GPU atomic operations.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Adds some selftests for exclusive device memory.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Acked-by: Jason Gunthorpe <[email protected]>
Tested-by: Ralph Campbell <[email protected]>
Reviewed-by: Ralph Campbell <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some devices require exclusive write access to shared virtual memory (SVM)
ranges to perform atomic operations on that memory. This requires CPU
page tables to be updated to deny access whilst atomic operations are
occurring.
In order to do this introduce a new swap entry type
(SWP_DEVICE_EXCLUSIVE). When a SVM range needs to be marked for exclusive
access by a device all page table mappings for the particular range are
replaced with device exclusive swap entries. This causes any CPU access
to the page to result in a fault.
Faults are resovled by replacing the faulting entry with the original
mapping. This results in MMU notifiers being called which a driver uses
to update access permissions such as revoking atomic access. After
notifiers have been called the device will no longer have exclusive access
to the region.
Walking of the page tables to find the target pages is handled by
get_user_pages() rather than a direct page table walk. A direct page
table walk similar to what migrate_vma_collect()/unmap() does could also
have been utilised. However this resulted in more code similar in
functionality to what get_user_pages() provides as page faulting is
required to make the PTEs present and to break COW.
[[email protected]: fix signedness bug in make_device_exclusive_range()]
Link: https://lkml.kernel.org/r/YNIz5NVnZ5GiZ3u1@mwanda
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently if copy_nonpresent_pte() returns a non-zero value it is assumed
to be a swap entry which requires further processing outside the loop in
copy_pte_range() after dropping locks. This prevents other values being
returned to signal conditions such as failure which a subsequent change
requires.
Instead make copy_nonpresent_pte() return an error code if further
processing is required and read the value for the swap entry in the main
loop under the ptl.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Alistair Popple <[email protected]>
Reviewed-by: Peter Xu <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: "Matthew Wilcox (Oracle)" <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Shakeel Butt <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|