aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-05-20iio: ad7606: Kconfig: add HAS_IOPORT dependenciesNiklas Schnelle1-1/+1
In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Niklas Schnelle <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-20dt-bindings: iio: st,lsm6dsx: reference common schema for mount-matrixKrzysztof Kozlowski1-0/+1
Reference iio.yaml schema from dtschema to allow already used mount-matrix property: msm8953-xiaomi-daisy.dtb: imu@6a: Unevaluated properties are not allowed ('mount-matrix' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-20MAINTAINERS: add the Renesas X9250 driver entryHerve Codina1-0/+7
After contributing the driver, add myself as the maintainer for the Renesas X9250 IIO driver. Signed-off-by: Herve Codina <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-20iio: potentiometer: Add support for the Renesas X9250 potentiometersHerve Codina3-0/+231
The Renesas X9250 integrates four digitally controlled potentiometers. On each potentiometer, the X9250T has a 100 kOhms total resistance and the X9250U has a 50 kOhms total resistance. Signed-off-by: Herve Codina <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: potentiometer: Add the Renesas X9250 potentiometersHerve Codina1-0/+78
The Renesas X9250 is a quad digitally controlled potentiometers. Signed-off-by: Herve Codina <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: imu: mpu6050: Add support for the ICM 20600 IMUHermes Zhang5-2/+25
The Invensense ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope and an 3-axis accelerometer. It is very similar to the ICM20602 imu which is already supported by the mpu6050 driver. The main difference is that the ICM-20600 has a different WHOAMI value. Signed-off-by: Hermes Zhang <[email protected]> Acked-by: Jean-Baptiste Maneyrol <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: imu: mpu6050: Add icm20600 bindings to mpu6050Hermes Zhang1-0/+3
ICM-20600 is almost same as ICM-20602 which already support in mpu6050 driver. Specify "invensense,icm20602" as a fallback compatible Signed-off-by: Hermes Zhang <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Acked-by: Jean-Baptiste Maneyrol <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: qcom-spmi-vadc: Propagate fw node label to userspaceMarijn Suijten1-1/+18
Set the read_label() callback to return a friendly name provided in DT (firmware), in order to make in_{therm,voltage}X_label attributes show up in sysfs for userspace to consume a channel name. This is particularly useful for custom thermistors being attached to otherwise generically named GPIOs, where the name is known by the board DT. If the channel name isn't set in DT, use the datasheet_name hardcoded in the driver instead. Note that this doesn't fall back to fwnode_get_name() as that provides suboptimally readable names, with an @xx address suffix from board DT. Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-5-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: qcom-spmi-adc5: Remove unnecessary datasheet_name NULL checkMarijn Suijten1-2/+1
datasheet_name is statically filled by a macro for every channel, and is nor should ever be set to NULL. Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-4-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: qcom-spmi-adc5: Fall back to datasheet_name instead of fwnode nameMarijn Suijten1-1/+1
Since the migration to fwnode_get_name in commit 4f47a236a23d ("iio: adc: qcom-spmi-adc5: convert to device properties") the resulting adc5_channel_prop::channel_name (renamed from datasheet_name in the previous patch) - which is propagated into iio_chan_spec::extend_name - was containing the DT node name including @xx suffix if a "label" property is not present, while adc5_channels::datasheet_name was thus far set by the macros but always remained unread. Put it to use instead of using a confusing name containing @xx in sysfs filenames (again, when "label" is not set). Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-3-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: qcom-spmi-adc5: Use driver datasheet_name instead of DT labelMarijn Suijten1-5/+5
iio_chan_spec::datasheet_name expects a channel/pin name on the hardware part, i.e. from its datasheet, instead of a friendly name from DT which typically describes the use of said channel. GPIO channels are commonly specialized in QCOM board DTS based on what a - typically thermistor - is connected to. Also rename adc5_channel_prop::datasheet_name to channel_name to that effect. Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-2-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: core: Point users of extend_name field to read_label callbackMarijn Suijten1-0/+3
As mentioned and discussed in [1] extend_name should not be used for full channel labels (and most drivers seem to only use it to express a short type of a channel) as this affects sysfs filenames, while the label name is supposed to be extracted from the *_label sysfs file instead. This appears to have been unclear to some drivers as extend_name is also used when read_label is unset, achieving an initial goal of providing sensible names in *_label sysfs files without noticing that sysfs filenames are (negatively and likely unintentionally) affected as well. Point readers of iio_chan_spec::extend_name to iio_info::read_label by mentioning deprecation and side-effects of this field. [1]: https://lore.kernel.org/linux-arm-msm/[email protected]/ Suggested-by: Jonathan Cameron <[email protected]> Signed-off-by: Marijn Suijten <[email protected]> Link: https://lore.kernel.org/r/20230502-iio-adc-propagate-fw-node-label-v3-1-6be5db6e6b5a@somainline.org Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: kx022a: Probe asynchronouslyMatti Vaittinen2-0/+2
Devices which may take a while to initialize during probe and which have no strong reason to probe synchronously can request asynchronous probing as default probe strategy. This can speed-up start times on some platforms. The KX022A gets probe delayed for at least two reasons. It enables the supply regulator, (which is likely to have ramp-up delay if it was disabled) and additionally it delays while the sensor itself is initializing. Changing to asynchronous probing may cause problems. Some of which are discussed in: https://lore.kernel.org/all/[email protected]/ Enable asynchronous probing for KX022A. Signed-off-by: Matti Vaittinen <[email protected]> Link: https://lore.kernel.org/r/24cea76c282a28b7a4dba297ab627176f8097907.1683185765.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: bu27034: Probe asynchronouslyMatti Vaittinen1-0/+1
Devices which may take a while to initialize during probe and which have no strong reason to probe synchronously can request asynchronous probing as default probe strategy. This can speed-up start times on some platforms. The BU27034 gets probe delayed for at least two reasons. It enables the supply regulator, (which is likely to have ramp-up delay if it was disabled) and additionally it delays while the sensor itself is initializing. Changing to asynchronous probing may cause problems. Some of which are discussed in: https://lore.kernel.org/all/[email protected]/ Enabling async probing for the ROHM BU27034 should be fairly safe to try though as there is no in-tree users for it yet. If the async probing appears to be an issue we can switch easily back to synchronous (or better yet, fix the actual problem). Enable asynchronous probing for BU27034. Signed-off-by: Matti Vaittinen <[email protected]> Link: https://lore.kernel.org/r/e7088793e1868c77b1894b30cd026e8ed043ea7c.1683185765.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: adc: Require generic `channel` name for channel nodesMarijn Suijten1-12/+14
As discussed in [1] it is more convenient to use a generic `channel` node name for ADC channels while storing a friendly - board-specific instead of PMIC-specific - name in the label, if/when desired to overwrite the channel description already contained (but previously unused) in the driver [2]. The same `channel` node name pattern has also been set in iio/adc/adc.yaml, but this generic binding is not inherited as base for qcom,spmi-vadc bindings due to not having any other generic elements in common, besides the node name rule and reg property. Replace the .* name pattern with the `channel` literal, but leave the label property optional for bindings to choose to fall back a channel label hardcoded in the driver [2] instead. [1]: https://lore.kernel.org/linux-arm-msm/[email protected]/T/#u [2]: https://lore.kernel.org/linux-arm-msm/[email protected]/ Signed-off-by: Marijn Suijten <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: buffer: fix coding style warningsNuno Sá1-49/+49
Just cosmetics. No functional change intended... Signed-off-by: Nuno Sá <[email protected]> Reviewed-by: Lars-Peter Clausen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: light: Add support for TI OPT4001 light sensorStefan Windfeldt-Prytz3-0/+479
This driver uses the continuous mode of the chip and integration time can be configured through sysfs. The constants for calculating lux value differs between packaging so it uses different compatible string for the two versions "ti,opt4001-picostar" and "ti,opt4001-sot-5x3" since the device id is the same. Datasheet: https://www.ti.com/lit/gpn/opt4001 Signed-off-by: Stefan Windfeldt-Prytz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: light: Document TI OPT4001 light sensorStefan Windfeldt-Prytz1-0/+68
Add devicetree bindings for opt4001 ambient light sensor. Signed-off-by: Stefan Windfeldt-Prytz <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: palmas: Remove the unneeded include <linux/i2c.h>Christophe JAILLET1-1/+0
This driver does not use i2c, so there is no point in including <linux/i2c.h> Remove it. Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/9d23cd04d7f99dc8d813584aae5268b57f92fcd8.1682320298.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: adc: Add support for MT7986Frank Wunderlich1-0/+1
Add compatible string and specific clock property for mt7986. Signed-off-by: Frank Wunderlich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: adc: stm32-adc: add debug info if dt uses legacy channel configSean Nyekjaer1-0/+2
Since nearly all stm32 dt's are using the legacy adc channel config, we should warn users about using it. Signed-off-by: Sean Nyekjaer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: light: al3320a: Handle ACPI device CALS0001Marius Hoch1-0/+8
This sensor can be found as CALS0001 on the Lenovo Yoga Tablet 2 series. Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <[email protected]> Tested-by: Hans de Goede <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: accel: bma400: Simplify an error messageChristophe JAILLET1-2/+1
dev_err_probe() already display the error code. There is no need to duplicate it explicitly in the error message. Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/9373d41b0a1f3dc3fc0d31c1daaa19d9a7ec4dcd.1681575924.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: st-sensors: Add LSM303D accelerometer+magnetometerMarius Hoch1-0/+1
Same as the lsm9ds0, except that the lsm303d doesn't feature a gyroscope. Signed-off-by: Marius Hoch <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: Comment that the LSM303D also has the Magnetometer DRDYMarius Hoch1-1/+1
Per its datasheet, the LSM303D also features that pin. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: st_sensors: Add ACPI support for lsm303d to the LSM9DS0 IMU driverMarius Hoch1-0/+7
The lsm303d can be found as ACCL0001 on various Lenovo devices, including the Lenovo Yoga Tablet 2 1051-F, where I tested this patch. Dropped SPI support as per discussion in thread linked below. Signed-off-by: Marius Hoch <[email protected]> Acked-by: Linus Walleij <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: st_sensors: Add lsm303d support to the LSM9DS0 IMU driverMarius Hoch3-1/+12
The lsm303d is basically the lsm9ds0 without the gyroscope (which the LSM9DS0 IMU driver doesn't handle), as far as I can tell. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: magnetometer: st_accel: Add LSM303DMarius Hoch1-0/+1
The lsm303d has the same register mapping as the lsm9ds0, thus we can just re-use that. Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13iio: accel: st_accel: Add LSM303DMarius Hoch2-0/+2
The lsm303d has the same register mapping as the lsm9ds0, thus we can just re-use that. Tested on a Lenovo Yoga Tablet 2 1051-F. Signed-off-by: Marius Hoch <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Tested-by: Hans de Goede <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-13dt-bindings: iio: adc: qcom,spmi-vadc: Allow 1/16 for pre-scalingLuca Weiss1-1/+1
The channel ADC5_USB_IN_V_16 is using 1/16 pre-scaling on at least pm7250b and pmi632. Allow that in the schema. Signed-off-by: Luca Weiss <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2023-05-07Linux 6.4-rc1Linus Torvalds1-2/+2
2023-05-07Merge tag 'perf-tools-for-v6.4-3-2023-05-06' of ↵Linus Torvalds514-144556/+167669
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tool updates from Arnaldo Carvalho de Melo: "Third version of perf tool updates, with the build problems with with using a 'vmlinux.h' generated from the main build fixed, and the bpf skeleton build disabled by default. Build: - Require libtraceevent to build, one can disable it using NO_LIBTRACEEVENT=1. It is required for tools like 'perf sched', 'perf kvm', 'perf trace', etc. libtraceevent is available in most distros so installing 'libtraceevent-devel' should be a one-time event to continue building perf as usual. Using NO_LIBTRACEEVENT=1 produces tooling that is functional and sufficient for lots of users not interested in those libtraceevent dependent features. - Allow Python support in 'perf script' when libtraceevent isn't linked, as not all features requires it, for instance Intel PT does not use tracepoints. - Error if the python interpreter needed for jevents to work isn't available and NO_JEVENTS=1 isn't set, preventing a build without support for JSON vendor events, which is a rare but possible condition. The two check error messages: $(error ERROR: No python interpreter needed for jevents generation. Install python or build with NO_JEVENTS=1.) $(error ERROR: Python interpreter needed for jevents generation too old (older than 3.6). Install a newer python or build with NO_JEVENTS=1.) - Make libbpf 1.0 the minimum required when building with out of tree, distro provided libbpf. - Use libsdtc++'s and LLVM's libcxx's __cxa_demangle, a portable C++ demangler, add 'perf test' entry for it. - Make binutils libraries opt in, as distros disable building with it due to licensing, they were used for C++ demangling, for instance. - Switch libpfm4 to opt-out rather than opt-in, if libpfm-devel (or equivalent) isn't installed, we'll just have a build warning: Makefile.config:1144: libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev - Add a feature test for scandirat(), that is not implemented so far in musl and uclibc, disabling features that need it, such as scanning for tracepoints in /sys/kernel/tracing/events. perf BPF filters: - New feature where BPF can be used to filter samples, for instance: $ sudo ./perf record -e cycles --filter 'period > 1000' true $ sudo ./perf script perf-exec 2273949 546850.708501: 5029 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708508: 32409 cycles: ffffffff826f9e25 finish_wait+0x5 ([kernel.kallsyms]) perf-exec 2273949 546850.708526: 143369 cycles: ffffffff82b4cdbf xas_start+0x5f ([kernel.kallsyms]) perf-exec 2273949 546850.708600: 372650 cycles: ffffffff8286b8f7 __pagevec_lru_add+0x117 ([kernel.kallsyms]) perf-exec 2273949 546850.708791: 482953 cycles: ffffffff829190de __mod_memcg_lruvec_state+0x4e ([kernel.kallsyms]) true 2273949 546850.709036: 501985 cycles: ffffffff828add7c tlb_gather_mmu+0x4c ([kernel.kallsyms]) true 2273949 546850.709292: 503065 cycles: 7f2446d97c03 _dl_map_object_deps+0x973 (/usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2) - In addition to 'period' (PERF_SAMPLE_PERIOD), the other PERF_SAMPLE_ can be used for filtering, and also some other sample accessible values, from tools/perf/Documentation/perf-record.txt: Essentially the BPF filter expression is: <term> <operator> <value> (("," | "||") <term> <operator> <value>)* The <term> can be one of: ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr, code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat, p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock, mem_dtlb, mem_blk, mem_hops The <operator> can be one of: ==, !=, >, >=, <, <=, & The <value> can be one of: <number> (for any term) na, load, store, pfetch, exec (for mem_op) l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl) na, none, hit, miss, hitm, fwd, peer (for mem_snoop) remote (for mem_remote) na, locked (for mem_locked) na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb) na, by_data, by_addr (for mem_blk) hops0, hops1, hops2, hops3 (for mem_hops) perf lock contention: - Show lock type with address. - Track and show mmap_lock, siglock and per-cpu rq_lock with address. This is done for mmap_lock by following the current->mm pointer: $ sudo ./perf lock con -abl -- sleep 10 contended total wait max wait avg wait address symbol ... 16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640 17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0 3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock 3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58 1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70 9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock 14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0 3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock 16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560 11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock 1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8 1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock 581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058 5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070 112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120 381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock 255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80 - Update default map size to 16384. - Allocate single letter option -M for --map-nr-entries, as it is proving being frequently used. - Fix struct rq lock access for older kernels with BPF's CO-RE (Compile once, run everywhere). - Fix problems found with MSAn. perf report/top: - Add inline information when using --call-graph=fp or lbr, as was already done to the --call-graph=dwarf callchain mode. - Improve the 'srcfile' sort key performance by really using an optimization introduced in 6.2 for the 'srcline' sort key that avoids calling addr2line for comparision with each sample. perf sched: - Make 'perf sched latency/map/replay' to use "sched:sched_waking" instead of "sched:sched_waking", consistent with 'perf record' since d566a9c2d482 ("perf sched: Prefer sched_waking event when it exists"). perf ftrace: - Make system wide the default target for latency subcommand, run the following command then generate some network traffic and press control+C: # perf ftrace latency -T __kfree_skb ^C DURATION | COUNT | GRAPH | 0 - 1 us | 27 | ############# | 1 - 2 us | 22 | ########### | 2 - 4 us | 8 | #### | 4 - 8 us | 5 | ## | 8 - 16 us | 24 | ############ | 16 - 32 us | 2 | # | 32 - 64 us | 1 | | 64 - 128 us | 0 | | 128 - 256 us | 0 | | 256 - 512 us | 0 | | 512 - 1024 us | 0 | | 1 - 2 ms | 0 | | 2 - 4 ms | 0 | | 4 - 8 ms | 0 | | 8 - 16 ms | 0 | | 16 - 32 ms | 0 | | 32 - 64 ms | 0 | | 64 - 128 ms | 0 | | 128 - 256 ms | 0 | | 256 - 512 ms | 0 | | 512 - 1024 ms | 0 | | 1 - ... s | 0 | | # perf top: - Add --branch-history (LBR: Last Branch Record) option, just like already available for 'perf record'. - Fix segfault in thread__comm_len() where thread->comm was being used outside thread->comm_lock. perf annotate: - Allow configuring objdump and addr2line in ~/.perfconfig., so that you can use alternative binaries, such as llvm's. perf kvm: - Add TUI mode for 'perf kvm stat report'. Reference counting: - Add reference count checking infrastructure to check for use after free, done to the 'cpumap', 'namespaces', 'maps' and 'map' structs, more to come. To build with it use -DREFCNT_CHECKING=1 in the make command line to build tools/perf. Documented at: https://perf.wiki.kernel.org/index.php/Reference_Count_Checking - The above caught, for instance, fix, present in this series: - Fix maps use after put in 'perf test "Share thread maps"': 'maps' is copied from leader, but the leader is put on line 79 and then 'maps' is used to read the reference count below - so a use after put, with the put of maps happening within thread__put. Fixed by reversing the order of puts so that the leader is put last. - Also several fixes were made to places where reference counts were not being held. - Make this one of the tests in 'make -C tools/perf build-test' to regularly build test it and to make sure no direct access to the reference counted structs are made, doing that via accessors to check the validity of the struct pointer. ARM64: - Fix 'perf report' segfault when filtering coresight traces by sparse lists of CPUs. - Add support for 'simd' as a sort field for 'perf report', to show ARM's NEON SIMD's predicate flags: "partial" and "empty". arm64 vendor events: - Add N1 metrics. Intel vendor events: - Add graniterapids, grandridge and sierraforrest events. - Refresh events for: alderlake, aldernaken, broadwell, broadwellde, broadwellx, cascadelakx, haswell, haswellx, icelake, icelakex, jaketown, meteorlake, knightslanding, sandybridge, sapphirerapids, silvermont, skylake, tigerlake and westmereep-dp - Refresh metrics for alderlake-n, broadwell, broadwellde, broadwellx, haswell, haswellx, icelakex, ivybridge, ivytown and skylakex. perf stat: - Implement --topdown using JSON metrics. - Add TopdownL1 JSON metric as a default if present, but disable it for now for some Intel hybrid architectures, a series of patches addressing this is being reviewed and will be submitted for v6.5. - Use metrics for --smi-cost. - Update topdown documentation. Vendor events (JSON) infrastructure: - Add support for computing and printing metric threshold values. For instance, here is one found in thesapphirerapids json file: { "BriefDescription": "Percentage of cycles spent in System Management Interrupts.", "MetricExpr": "((msr@aperf@ - cycles) / msr@aperf@ if msr@smi@ > 0 else 0)", "MetricGroup": "smi", "MetricName": "smi_cycles", "MetricThreshold": "smi_cycles > 0.1", "ScaleUnit": "100%" }, - Test parsing metric thresholds with the fake PMU in 'perf test pmu-events'. - Support for printing metric thresholds in 'perf list'. - Add --metric-no-threshold option to 'perf stat'. - Add rand (reverse and) and has_pmem (optane memory) support to metrics. - Sort list of input files to avoid depending on the order from readdir() helping in obtaining reproducible builds. S/390: - Add common metrics: - CPI (cycles per instruction), prbstate (ratio of instructions executed in problem state compared to total number of instructions), l1mp (Level one instruction and data cache misses per 100 instructions). - Add cache metrics for z13, z14, z15 and z16. - Add metric for TLB and cache. ARM: - Add raw decoding for SPE (Statistical Profiling Extension) v1.3 MTE (Memory Tagging Extension) and MOPS (Memory Operations) load/store. Intel PT hardware tracing: - Add event type names UINTR (User interrupt delivered) and UIRET (Exiting from user interrupt routine), documented in table 32-50 "CFE Packet Type and Vector Fields Details" in the Intel Processor Trace chapter of The Intel SDM Volume 3 version 078. - Add support for new branch instructions ERETS and ERETU. - Fix CYC timestamps after standalone CBR ARM CoreSight hardware tracing: - Allow user to override timestamp and contextid settings. - Fix segfault in dso lookup. - Fix timeless decode mode detection. - Add separate decode paths for timeless and per-thread modes. auxtrace: - Fix address filter entire kernel size. Miscellaneous: - Fix use-after-free and unaligned bugs in the PLT handling routines. - Use zfree() to reduce chances of use after free. - Add missing 0x prefix for addresses printed in hexadecimal in 'perf probe'. - Suppress massive unsupported target platform errors in the unwind code. - Fix return incorrect build_id size in elf_read_build_id(). - Fix 'perf scripts intel-pt-events.py' IPC output for Python 2 . - Add missing new parameter in kfree_skb tracepoint to the python scripts using it. - Add 'perf bench syscall fork' benchmark. - Add support for printing PERF_MEM_LVLNUM_UNC (Uncached access) in 'perf mem'. - Fix wrong size expectation for perf test 'Setup struct perf_event_attr' caused by the patch adding perf_event_attr::config3. - Fix some spelling mistakes" * tag 'perf-tools-for-v6.4-3-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (365 commits) Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL" Revert "perf build: Warn for BPF skeletons if endian mismatches" perf metrics: Fix SEGV with --for-each-cgroup perf bpf skels: Stop using vmlinux.h generated from BTF, use subset of used structs + CO-RE perf stat: Separate bperf from bpf_profiler perf test record+probe_libc_inet_pton: Fix call chain match on x86_64 perf test record+probe_libc_inet_pton: Fix call chain match on s390 perf tracepoint: Fix memory leak in is_valid_tracepoint() perf cs-etm: Add fix for coresight trace for any range of CPUs perf build: Fix unescaped # in perf build-test perf unwind: Suppress massive unsupported target platform errors perf script: Add new parameter in kfree_skb tracepoint to the python scripts using it perf script: Print raw ip instead of binary offset for callchain perf symbols: Fix return incorrect build_id size in elf_read_build_id() perf list: Modify the warning message about scandirat(3) perf list: Fix memory leaks in print_tracepoint_events() perf lock contention: Rework offset calculation with BPF CO-RE perf lock contention: Fix struct rq lock access perf stat: Disable TopdownL1 on hybrid perf stat: Avoid SEGV on counter->name ...
2023-05-07Merge tag 'core-debugobjects-2023-05-06' of ↵Linus Torvalds1-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects fix from Thomas Gleixner: "A single fix for debugobjects: The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism, so that debugobject OOMs now in certain situations. The reason is that the functions which got updated no longer invoke debug_objecs_init(), which is now the only place to care about refilling the tracking object pool. Restore the original behaviour by adding explicit refill opportunities to those places" * tag 'core-debugobjects-2023-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobject: Ensure pool refill (again)
2023-05-07Merge tag 'v6.4-p2' of ↵Linus Torvalds12-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - A long-standing bug in crypto_engine - A buggy but harmless check in the sun8i-ss driver - A regression in the CRYPTO_USER interface * tag 'v6.4-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix CRYPTO_USER checks for report function crypto: engine - fix crypto_queue backlog handling crypto: sun8i-ss - Fix a test in sun8i_ss_setup_ivs()
2023-05-07Merge tag '6.4-rc-smb3-client-fixes-part2' of ↵Linus Torvalds15-223/+376
git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "smb3 client fixes, mostly DFS or reconnect related: - Two DFS connection sharing fixes - DFS refresh fix - Reconnect fix - Two potential use after free fixes - Also print prefix patch in mount debug msg - Two small cleanup fixes" * tag '6.4-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Remove unneeded semicolon cifs: fix sharing of DFS connections cifs: avoid potential races when handling multiple dfs tcons cifs: protect access of TCP_Server_Info::{origin,leaf}_fullpath cifs: fix potential race when tree connecting ipc cifs: fix potential use-after-free bugs in TCP_Server_Info::hostname cifs: print smb3_fs_context::source when mounting cifs: protect session status check in smb2_reconnect() SMB3.1.1: correct definition for app_instance_id create contexts
2023-05-07Merge tag 'clk-for-linus' of ↵Linus Torvalds3-12/+2
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple more patches that would be good to get into -rc1: - Revert an i.MX patch that's causing video failures because division math goes sideways - Fix a clang + W=1 build isue where FIELD_PREP() is taking a 32-bit variable instead of the usual u64 type - Fix a Kconfig bug in the StarFive JH7110 clk config that selects a reset controller when it can't be selected" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: starfive: Fix RESET_STARFIVE_JH7110 can't be selected in a specified case clk: sp7021: Adjust width of _m in HWM_FIELD_PREP() Revert "clk: imx: composite-8m: Add support to determine_rate"
2023-05-07Merge tag 'mailbox-v6.4' of ↵Linus Torvalds13-122/+288
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - mailbox api: allow direct registration to a channel and convert omap and pcc to use mbox_bind_client - omap and hi6220 : use of_property_read_bool - test: fix double-free and use spinlock header - rockchip and bcm-pdc: drop of_match_ptr - mpfs: change config symbol - mediatek gce: support MT6795 - qcom apcs: consolidate of_device_id and support IPQ9574 * tag 'mailbox-v6.4' of git://git.linaro.org/landing-teams/working/fujitsu/integration: dt-bindings: mailbox: qcom: add compatible for IPQ9574 SoC mailbox: qcom-apcs-ipc: do not grow the of_device_id dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants dt-bindings: mailbox: mediatek,gce-mailbox: Add support for MT6795 mailbox: mpfs: convert SOC_MICROCHIP_POLARFIRE to ARCH_MICROCHIP_POLARFIRE mailbox: bcm-pdc: drop of_match_ptr for ID table mailbox: rockchip: drop of_match_ptr for ID table mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write() mailbox: mailbox-test: Explicitly include header for spinlock support mailbox: Use of_property_read_bool() for boolean properties mailbox: pcc: Use mbox_bind_client mailbox: omap: Use mbox_bind_client mailbox: Allow direct registration to a channel
2023-05-07Merge tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linuxLinus Torvalds8-41/+47
Pull more io_uring updates from Jens Axboe: "Nothing major in here, just two different parts: - A small series from Breno that enables passing the full SQE down for ->uring_cmd(). This is a prerequisite for enabling full network socket operations. Queued up a bit late because of some stylistic concerns that got resolved, would be nice to have this in 6.4-rc1 so the dependent work will be easier to handle for 6.5. - Fix for the huge page coalescing, which was a regression introduced in the 6.3 kernel release (Tobias)" * tag 'for-6.4/io_uring-2023-05-07' of git://git.kernel.dk/linux: io_uring: Remove unnecessary BUILD_BUG_ON io_uring: Pass whole sqe to commands io_uring: Create a helper to return the SQE size io_uring/rsrc: check for nonconsecutive pages
2023-05-06Revert "perf build: Make BUILD_BPF_SKEL default, rename to NO_BPF_SKEL"Arnaldo Carvalho de Melo6-20/+14
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-05-06Revert "perf build: Warn for BPF skeletons if endian mismatches"Arnaldo Carvalho de Melo1-10/+7
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3. We need to better polish building with BPF skels, so revert back to making it an experimental feature that has to be explicitely enabled using BUILD_BPF_SKEL=1. Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-05-06Merge tag 'mm-stable-2023-05-06-10-49' of ↵Linus Torvalds1-205/+202
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull dmapool updates - again - from Andrew Morton: "Reinstate the dmapool changes which were accidentally removed by a mishap on the last commit in the previous attempt at the series" Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup"). [ The whole old series: def8574308ed..2d55c16c0c54 results in an empty diff because that last commit ended up being just a revert of all that came everything before it. - Linus ] * tag 'mm-stable-2023-05-06-10-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: dmapool: link blocks across pages dmapool: don't memset on free twice dmapool: simplify freeing dmapool: consolidate page initialization dmapool: rearrange page alloc failure handling dmapool: move debug code to own functions dmapool: speedup DMAPOOL_DEBUG with init_on_alloc dmapool: cleanup integer types dmapool: use sysfs_emit() instead of scnprintf() dmapool: remove checks for dev == NULL
2023-05-06Merge tag 'mm-hotfixes-stable-2023-05-06-10-45' of ↵Linus Torvalds5-13/+35
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Five hotfixes. Three are cc:stable, two pertain to merge window changes" * tag 'mm-hotfixes-stable-2023-05-06-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: afs: fix the afs_dir_get_folio return value nilfs2: do not write dirty data after degenerating to read-only mm: do not reclaim private data from pinned page nilfs2: fix infinite loop in nilfs_mdt_get_block() mm/mmap/vma_merge: always check invariants
2023-05-06dmapool: link blocks across pagesKeith Busch1-127/+130
The allocated dmapool pages are never freed for the lifetime of the pool. There is no need for the two level list+stack lookup for finding a free block since nothing is ever removed from the list. Just use a simple stack, reducing time complexity to constant. The implementation inserts the stack linking elements and the dma handle of the block within itself when freed. This means the smallest possible dmapool block is increased to at most 16 bytes to accommodate these fields, but there are no exisiting users requesting a dma pool smaller than that anyway. Removing the list has a significant change in performance. Using the kernel's micro-benchmarking self test: Before: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:57282 dmapool test: size:64 blocks:8192 time:172562 dmapool test: size:256 blocks:8192 time:789247 dmapool test: size:1024 blocks:2048 time:371823 dmapool test: size:4096 blocks:1024 time:362237 After: # modprobe dmapool_test dmapool test: size:16 blocks:8192 time:24997 dmapool test: size:64 blocks:8192 time:26584 dmapool test: size:256 blocks:8192 time:33542 dmapool test: size:1024 blocks:2048 time:9022 dmapool test: size:4096 blocks:1024 time:6045 The module test allocates quite a few blocks that may not accurately represent how these pools are used in real life. For a more marco level benchmark, running fio high-depth + high-batched on nvme, this patch shows submission and completion latency reduced by ~100usec each, 1% IOPs improvement, and perf record's time spent in dma_pool_alloc/free were reduced by half. [[email protected]: push new blocks in ascending order] Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Tested-by: Bryan O'Donoghue <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: don't memset on free twiceKeith Busch1-2/+2
If debug is enabled, dmapool will poison the range, so no need to clear it to 0 immediately before writing over it. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: simplify freeingKeith Busch1-16/+6
The actions for busy and not busy are mostly the same, so combine these and remove the unnecessary function. Also, the pool is about to be freed so there's no need to poison the page data since we only check for poison on alloc, which can't be done on a freed pool. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: consolidate page initializationKeith Busch1-4/+3
Various fields of the dma pool are set in different places. Move it all to one function. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: rearrange page alloc failure handlingKeith Busch1-7/+9
Handle the error in a condition so the good path can be in the normal flow. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: move debug code to own functionsKeith Busch1-51/+77
Clean up the normal path by moving the debug code outside it. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Tony Battersby <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: speedup DMAPOOL_DEBUG with init_on_allocTony Battersby1-1/+1
Avoid double-memset of the same allocated memory in dma_pool_alloc() when both DMAPOOL_DEBUG is enabled and init_on_alloc=1. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <[email protected]> Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2023-05-06dmapool: cleanup integer typesTony Battersby1-8/+11
To represent the size of a single allocation, dmapool currently uses 'unsigned int' in some places and 'size_t' in other places. Standardize on 'unsigned int' to reduce overhead, but use 'size_t' when counting all the blocks in the entire pool. Link: https://lkml.kernel.org/r/[email protected] Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup") Signed-off-by: Tony Battersby <[email protected]> Signed-off-by: Keith Busch <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.