| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
All devices support SOF_TIMESTAMPING_RX_SOFTWARE by virtue of
net_timestamp_check() being called in the device independent code.
Move the responsibility of reporting SOF_TIMESTAMPING_RX_SOFTWARE and
SOF_TIMESTAMPING_SOFTWARE, and setting PHC index to -1 to the core.
Device drivers no longer need to use them.
Suggested-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Co-developed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Gal Pressman <[email protected]>
Reviewed-by: Marc Kleine-Budde <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Move away from corporate infrastructure for upstream work. Also update
mailmap.
Signed-off-by: Andreas Hindborg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-30 (igc, e1000e, i40e)
This series contains updates to igc, e1000e, and i40 drivers.
Kurt Kanzenbach adds support for MQPRIO offloads and stops unintended,
excess interrupts on igc.
Sasha adds reporting of EEE (Energy Efficient Ethernet) ability and
moves a register define to a better suited file for igc.
Vitaly stops reporting errors on shutdown and suspend as they are not
fatal for e1000e.
Alex adds reporting of EEE to i40e.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Add Energy Efficient Ethernet ability for X710 Base-T/KR/KX cards
e1000e: avoid failing the system during pm_suspend
igc: Move the MULTI GBT AN Control Register to _regs file
igc: Add Energy Efficient Ethernet ability
igc: Get rid of spurious interrupts
igc: Add MQPRIO offload support
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
|
|
There's a potential race when `cgroup_bpf_enabled(CGROUP_GETSOCKOPT)` is
false during the execution of `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN`, but
becomes true when `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is called.
This inconsistency can lead to `BPF_CGROUP_RUN_PROG_GETSOCKOPT` receiving
an "-EFAULT" from `__cgroup_bpf_run_filter_getsockopt(max_optlen=0)`.
Scenario shown as below:
`process A` `process B`
----------- ------------
BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN
enable CGROUP_GETSOCKOPT
BPF_CGROUP_RUN_PROG_GETSOCKOPT (-EFAULT)
To resolve this, remove the `BPF_CGROUP_GETSOCKOPT_MAX_OPTLEN` macro and
directly uses `copy_from_sockptr` to ensure that `max_optlen` is always
set before `BPF_CGROUP_RUN_PROG_GETSOCKOPT` is invoked.
Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks")
Co-developed-by: Yanghui Li <[email protected]>
Signed-off-by: Yanghui Li <[email protected]>
Co-developed-by: Cheng-Jui Wang <[email protected]>
Signed-off-by: Cheng-Jui Wang <[email protected]>
Signed-off-by: Tze-nan Wu <[email protected]>
Acked-by: Stanislav Fomichev <[email protected]>
Acked-by: Alexei Starovoitov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 74293ea1c4db ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Simon Horman <[email protected]> # build-tested
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-01
Simon Horman catched two typos in our headers. No functional change.
* tag 'ieee802154-for-net-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
ieee802154: Correct spelling in nl802154.h
mac802154: Correct spelling in mac802154.h
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If netem_dequeue() enqueues packet to inner qdisc and that qdisc
returns __NET_XMIT_STOLEN. The packet is dropped but
qdisc_tree_reduce_backlog() is not called to update the parent's
q.qlen, leading to the similar use-after-free as Commit
e04991a48dbaf382 ("netem: fix return value if duplicate enqueue
fails")
Commands to trigger KASAN UaF:
ip link add type dummy
ip link set lo up
ip link set dummy0 up
tc qdisc add dev lo parent root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2: handle 3: drr
tc filter add dev lo parent 3: basic classid 3:1 action mirred egress
redirect dev dummy0
tc class add dev lo classid 3:1 drr
ping -c1 -W0.01 localhost # Trigger bug
tc class del dev lo classid 1:1
tc class add dev lo classid 1:1 drr
ping -c1 -W0.01 localhost # UaF
Fixes: 50612537e9ab ("netem: fix classful handling")
Reported-by: Budimir Markovic <[email protected]>
Signed-off-by: Stephen Hemminger <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch improves two checks on user data.
The first one prevents bit 23 from being set, as specified by RFC 9197
(Sec 4.4.1):
Bit 23 Reserved; MUST be set to zero upon transmission and be
ignored upon receipt. This bit is reserved to allow for
future extensions of the IOAM Trace-Type bit field.
The second one checks that the tunnel destination address !=
IPV6_ADDR_ANY, just like we already do for the tunnel source address.
Signed-off-by: Justin Iurman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver generates a random MAC once on load
and uses it over and over, including on two devices
needing a random MAC at the same time.
Jakub suggested revamping the driver to the modern
API for setting a random MAC rather than fixing
the old stuff.
The bug is as old as the driver.
Signed-off-by: Oliver Neukum <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is part of an effort [1] to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
[1] https://lore.kernel.org/netdev/[email protected]/
It seems that net-cw1200.h is part of the CW1200 WLAN driver and
this it is appropriate to add it to the section for that driver.
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Use time_after macro instead of using jiffies directly to handle wraparound.
Change the type to to unsigned long to avoid unnecessary casts.
Signed-off-by: Chen Yufan <[email protected]>
Acked-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The wilc_sdio_suspend() does clk_disable_unprepare() on rtc_clk clock,
make sure wilc_sdio_resume() does matching clk_prepare_enable(), else
any suspend/resume cycle leads to clock disable/enable imbalance. Fix
the imbalance.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Alexis Lothoré <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
In case the hardware is not initialized, do not operate it during
suspend/resume cycle, the hardware is already off so there is no
reason to access it.
In fact, wilc_sdio_enable_interrupt() in the resume callback does
interfere with the same call when initializing the hardware after
resume and makes such initialization after resume fail. Fix this
by not operating uninitialized hardware during suspend/resume.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Alexis Lothoré <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:
1) Attempt a fsync without holding the inode's lock, triggering an
assertion failures when assertions are enabled;
2) Do an invalid memory access from the fsync task because the file private
points to memory allocated on stack by the direct IO task and it may be
used by the fsync task after the stack was destroyed.
The race happens like this:
1) A user space program opens a file descriptor with O_DIRECT;
2) The program spawns 2 threads using libpthread for example;
3) One of the threads uses the file descriptor to do direct IO writes,
while the other calls fsync using the same file descriptor.
4) Call task A the thread doing direct IO writes and task B the thread
doing fsyncs;
5) Task A does a direct IO write, and at btrfs_direct_write() sets the
file's private to an on stack allocated private with the member
'fsync_skip_inode_lock' set to true;
6) Task B enters btrfs_sync_file() and sees that there's a private
structure associated to the file which has 'fsync_skip_inode_lock' set
to true, so it skips locking the inode's VFS lock;
7) Task A completes the direct IO write, and resets the file's private to
NULL since it had no prior private and our private was stack allocated.
Then it unlocks the inode's VFS lock;
8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
assertion that checks the inode's VFS lock is held fails, since task B
never locked it and task A has already unlocked it.
The stack trace produced is the following:
assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:983!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 9 PID: 5072 Comm: worker Tainted: G U OE 6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
Code: 50 d6 86 c0 e8 (...)
RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
FS: 00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
Call Trace:
<TASK>
? __die_body.cold+0x14/0x24
? die+0x2e/0x50
? do_trap+0xca/0x110
? do_error_trap+0x6a/0x90
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? exc_invalid_op+0x50/0x70
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? asm_exc_invalid_op+0x1a/0x20
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
? __seccomp_filter+0x31d/0x4f0
__x64_sys_fdatasync+0x4f/0x90
do_syscall_64+0x82/0x160
? do_futex+0xcb/0x190
? __x64_sys_futex+0x10e/0x1d0
? switch_fpu_return+0x4f/0xd0
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
? syscall_exit_to_user_mode+0x72/0x220
? do_syscall_64+0x8e/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.
This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.
Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.
The following C program triggers the issue:
$ cat repro.c
/* Get the O_DIRECT definition. */
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <fcntl.h>
#include <errno.h>
#include <string.h>
#include <pthread.h>
static int fd;
static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
{
while (count > 0) {
ssize_t ret;
ret = pwrite(fd, buf, count, offset);
if (ret < 0) {
if (errno == EINTR)
continue;
return ret;
}
count -= ret;
buf += ret;
}
return 0;
}
static void *fsync_loop(void *arg)
{
while (1) {
int ret;
ret = fsync(fd);
if (ret != 0) {
perror("Fsync failed");
exit(6);
}
}
}
int main(int argc, char *argv[])
{
long pagesize;
void *write_buf;
pthread_t fsyncer;
int ret;
if (argc != 2) {
fprintf(stderr, "Use: %s <file path>\n", argv[0]);
return 1;
}
fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
if (fd == -1) {
perror("Failed to open/create file");
return 1;
}
pagesize = sysconf(_SC_PAGE_SIZE);
if (pagesize == -1) {
perror("Failed to get page size");
return 2;
}
ret = posix_memalign(&write_buf, pagesize, pagesize);
if (ret) {
perror("Failed to allocate buffer");
return 3;
}
ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
if (ret != 0) {
fprintf(stderr, "Failed to create writer thread: %d\n", ret);
return 4;
}
while (1) {
ret = do_write(fd, write_buf, pagesize, 0);
if (ret != 0) {
perror("Write failed");
exit(5);
}
}
return 0;
}
$ mkfs.btrfs -f /dev/sdi
$ mount /dev/sdi /mnt/sdi
$ timeout 10 ./repro /mnt/sdi/foo
Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.
Reported-by: Paulo Dias <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: [email protected]
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Fixes: 939b656bc8ab ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: [email protected] # 5.15+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.
No functional change.
Signed-off-by: Jinjie Ruan <[email protected]>
Acked-by: Arend van Spriel <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Convert binding doc marvel-8xxx.txt to yaml format.
Additional change:
- Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example.
- Remove mmc related property in example.
- Add wakeup-source property.
- Remove vmmc-supply and mmc-pwrseq.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1:
failed to match any schema with compatible: ['marvell,sd8997']
Acked-by: Brian Norris <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.11-rc7
We have three patch which address two issues in the ath11k driver
which should be addressed for 6.11-rc7:
One patch fixes a NULL pointer dereference while parsing transmit
power envelope (TPE) information, and the other two patches revert the
hibernation support since it is interfering with suspend on some
platforms. Note the cause of the suspend wakeups is still being
investigated, and it is hoped this can be addressed and hibernation
support can be restored in the near future.
|
|
After XDP configuration is completed, we bring the interface up
unconditionally, regardless of its state before the call to .ndo_bpf().
Preserve the information whether the interface had to be brought down and
later bring it up only in such case.
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Locking used in ice_qp_ena() and ice_qp_dis() does pretty much nothing,
because ICE_CFG_BUSY is a state flag that is supposed to be set in a PF
state, not VSI one. Therefore it does not protect the queue pair from
e.g. reset.
Remove ICE_CFG_BUSY locking from ice_qp_dis() and ice_qp_ena().
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Consider the following scenario:
.ndo_bpf() | ice_prepare_for_reset() |
________________________|_______________________________________|
rtnl_lock() | |
ice_down() | |
| test_bit(ICE_VSI_DOWN) - true |
| ice_dis_vsi() returns |
ice_up() | |
| proceeds to rebuild a running VSI |
.ndo_bpf() is not the only rtnl-locked callback that toggles the interface
to apply new configuration. Another example is .set_channels().
To avoid the race condition above, act only after reading ICE_VSI_DOWN
under rtnl_lock.
Fixes: 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow")
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on
VSI without applying new ring configuration. When unconfiguring the VSI, we
can encounter the state in which there is an XDP program but no XDP rings
to destroy or there will be XDP rings that need to be destroyed, but no XDP
program to indicate their presence.
When unconfiguring, rely on the presence of XDP rings rather then XDP
program, as they better represent the current state that has to be
destroyed.
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The main threat to data consistency in ice_xdp() is a possible asynchronous
PF reset. It can be triggered by a user or by TX timeout handler.
XDP setup and PF reset code access the same resources in the following
sections:
* ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked
* ice_vsi_rebuild() for the PF VSI - not protected
* ice_vsi_open() - already rtnl-locked
With an unfortunate timing, such accesses can result in a crash such as the
one below:
[ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14
[ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18
[Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms
[ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001
[ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14
[ +0.394718] ice 0000:b1:00.0: PTP reset successful
[ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ +0.000045] #PF: supervisor read access in kernel mode
[ +0.000023] #PF: error_code(0x0000) - not-present page
[ +0.000023] PGD 0 P4D 0
[ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1
[ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000036] Workqueue: ice ice_service_task [ice]
[ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice]
[...]
[ +0.000013] Call Trace:
[ +0.000016] <TASK>
[ +0.000014] ? __die+0x1f/0x70
[ +0.000029] ? page_fault_oops+0x171/0x4f0
[ +0.000029] ? schedule+0x3b/0xd0
[ +0.000027] ? exc_page_fault+0x7b/0x180
[ +0.000022] ? asm_exc_page_fault+0x22/0x30
[ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice]
[ +0.000194] ice_free_tx_ring+0xe/0x60 [ice]
[ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice]
[ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice]
[ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice]
[ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice]
[ +0.000145] ice_rebuild+0x18c/0x840 [ice]
[ +0.000145] ? delay_tsc+0x4a/0xc0
[ +0.000022] ? delay_tsc+0x92/0xc0
[ +0.000020] ice_do_reset+0x140/0x180 [ice]
[ +0.000886] ice_service_task+0x404/0x1030 [ice]
[ +0.000824] process_one_work+0x171/0x340
[ +0.000685] worker_thread+0x277/0x3a0
[ +0.000675] ? preempt_count_add+0x6a/0xa0
[ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50
[ +0.000679] ? __pfx_worker_thread+0x10/0x10
[ +0.000653] kthread+0xf0/0x120
[ +0.000635] ? __pfx_kthread+0x10/0x10
[ +0.000616] ret_from_fork+0x2d/0x50
[ +0.000612] ? __pfx_kthread+0x10/0x10
[ +0.000604] ret_from_fork_asm+0x1b/0x30
[ +0.000604] </TASK>
The previous way of handling this through returning -EBUSY is not viable,
particularly when destroying AF_XDP socket, because the kernel proceeds
with removal anyway.
There is plenty of code between those calls and there is no need to create
a large critical section that covers all of them, same as there is no need
to protect ice_vsi_rebuild() with rtnl_lock().
Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp().
Leaving unprotected sections in between would result in two states that
have to be considered:
1. when the VSI is closed, but not yet rebuild
2. when VSI is already rebuild, but not yet open
The latter case is actually already handled through !netif_running() case,
we just need to adjust flag checking a little. The former one is not as
trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of
hardware interaction happens, this can make adding/deleting rings exit
with an error. Luckily, VSI rebuild is pending and can apply new
configuration for us in a managed fashion.
Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to
indicate that ice_xdp() can just hot-swap the program.
Also, as ice_vsi_rebuild() flow is touched in this patch, make it more
consistent by deconfiguring VSI when coalesce allocation fails.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Fixes: efc2214b6047 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is
not rtnl-locked when called from the reset. This creates the need to take
the rtnl_lock just for a single function and complicates the
synchronization with .ndo_bpf. At the same time, there no actual need to
fill napi-to-queue information at this exact point.
Fill napi-to-queue information when opening the VSI and clear it when the
VSI is being closed. Those routines are already rtnl-locked.
Also, rewrite napi-to-queue assignment in a way that prevents inclusion of
XDP queues, as this leads to out-of-bounds writes, such as one below.
[ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0
[ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047
[ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2
[ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000003] Call Trace:
[ +0.000003] <TASK>
[ +0.000002] dump_stack_lvl+0x60/0x80
[ +0.000007] print_report+0xce/0x630
[ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0
[ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0
[ +0.000003] kasan_report+0xe9/0x120
[ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0
[ +0.000004] netif_queue_set_napi+0x1c2/0x1e0
[ +0.000005] ice_vsi_close+0x161/0x670 [ice]
[ +0.000114] ice_dis_vsi+0x22f/0x270 [ice]
[ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice]
[ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice]
[ +0.000087] pci_dev_save_and_disable+0x82/0xd0
[ +0.000006] pci_reset_function+0x12d/0x230
[ +0.000004] reset_store+0xa0/0x100
[ +0.000006] ? __pfx_reset_store+0x10/0x10
[ +0.000002] ? __pfx_mutex_lock+0x10/0x10
[ +0.000004] ? __check_object_size+0x4c1/0x640
[ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0
[ +0.000006] vfs_write+0x5d6/0xdf0
[ +0.000005] ? fd_install+0x180/0x350
[ +0.000005] ? __pfx_vfs_write+0x10/0xA10
[ +0.000004] ? do_fcntl+0x52c/0xcd0
[ +0.000004] ? kasan_save_track+0x13/0x60
[ +0.000003] ? kasan_save_free_info+0x37/0x60
[ +0.000006] ksys_write+0xfa/0x1d0
[ +0.000003] ? __pfx_ksys_write+0x10/0x10
[ +0.000002] ? __x64_sys_fcntl+0x121/0x180
[ +0.000004] ? _raw_spin_lock+0x87/0xe0
[ +0.000005] do_syscall_64+0x80/0x170
[ +0.000007] ? _raw_spin_lock+0x87/0xe0
[ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10
[ +0.000003] ? file_close_fd_locked+0x167/0x230
[ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220
[ +0.000005] ? do_syscall_64+0x8c/0x170
[ +0.000004] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? fput+0x1a/0x2c0
[ +0.000004] ? filp_close+0x19/0x30
[ +0.000004] ? do_dup2+0x25a/0x4c0
[ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0
[ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220
[ +0.000004] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? __count_memcg_events+0x113/0x380
[ +0.000005] ? handle_mm_fault+0x136/0x820
[ +0.000005] ? do_user_addr_fault+0x444/0xa80
[ +0.000004] ? clear_bhb_loop+0x25/0x80
[ +0.000004] ? clear_bhb_loop+0x25/0x80
[ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000005] RIP: 0033:0x7f2033593154
Fixes: 080b0c8d6d26 ("ice: Fix ASSERT_RTNL() warning during certain scenarios")
Fixes: 91fdbce7e8d6 ("ice: Add support in the driver for associating queue with napi")
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Amritha Nambiar <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: George Kuruvinakunnel <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The original quirk should match to GA403U so that the full
range of GA403U models can benefit.
Signed-off-by: Luke D. Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
|
|
Vadim Fedorenko says:
====================
ptp: ocp: fix serial port information export
Starting v6.8 the serial port subsystem changed the hierarchy of devices
and symlinks are not working anymore. Previous discussion made it clear
that the idea of symlinks for tty devices was wrong by design [1].
This series implements additional attributes to expose the information
and removes symlinks for tty devices.
[1] https://lore.kernel.org/netdev/2024060503-subsonic-pupil-bbee@gregkh/
v6 -> v7:
- fix issues with applying patches
v5 -> v6:
- split conversion to array to separate patch per Jiri's feedback
- move changelog to cover letter
v4 -> v5:
- remove unused variable in ptp_ocp_tty_show
v3 -> v4:
- re-organize info printing to use ptp_ocp_tty_port_name()
- keep uintptr_t to be consistent with other code
v2 -> v3:
- replace serial ports definitions with array and enum for index
- replace pointer math with direct array access
- nit in documentation spelling
v1 -> v2:
- add Documentation/ABI changes
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Update documentation according to the changes in the driver.
New attributes group tty is exposed and ttyGNSS, ttyGNSS2, ttyMAC and
ttyNMEA are moved to this group. Also, these attributes are no more
links to the devices but rather simple text files containing names of
tty devices.
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Implement additional attribute group to expose serial port information.
Fixes tag points to the commit which introduced the change in serial
port subsystem and made it impossible to use symlinks.
Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device")
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Simplify serial port management code by using array of ports and helpers
to get the name of the port. This change is needed to make the next
patch simplier.
Signed-off-by: Vadim Fedorenko <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When the of_device_id entry for "elgin,jg10309-01" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for elgin,jg10309-01
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: 5f3eee1eef5d0edd ("spi: spidev: Add an entry for elgin,jg10309-01")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <[email protected]>
|
|
Yue Haibing says:
====================
cleanup chelsio driver declarations
v2: correct patch 3 commit citation
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
These functions were never implenmented since introduction in
commit 8199d3a79c22 ("[PATCH] A new 10GB Ethernet Driver by Chelsio
Communications")
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit e2d14b42c25c ("cxgb4: Remove WOL get/set ethtool support") removed
t4_wol_magic_enable() and t4_wol_pat_enable() but leave declarations.
Commit 02d805dc5fe3 ("cxgb4: use new fw interface to get the VIN and smt
index") leave behind cxgb4_tp_smt_idx().
cxgb4_dcb_set_caps() is never implemented and used since introduction in
commit 76bcb31efc06 ("cxgb4 : Add DCBx support codebase and dcbnl_ops").
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Yue Haibing <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Commit 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter,
T3.") declared but never implemented these.
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Yue Haibing <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The sctp selftest is very slow on debug kernels.
Its possible that the nf_queue listener program exits due to timeout
before first sctp packet is processed.
In this case socat hangs until script times out.
Fix this by removing the -t option where possible and kill the test
program once the file transfer/socat has exited.
-t sets SO_RCVTIMEO, its inteded for the 'ping' part of the selftest
where we want to make sure that packets get reinjected properly without
skipping a second queue request.
While at it, add a helper to compare the (binary) files instead of diff.
The 'diff' part was copied from a another sub-test that compares text.
Let helper dump file sizes on error so we can see the progress made.
Tested on an old 2010-ish box with a debug kernel and 100 iterations.
This is a followup to the earlier filesize reduction change.
Reported-by: Jakub Kicinski <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Fixes: 0a8b08c554da ("selftests: netfilter: nft_queue.sh: reduce test file size for debug build")
Signed-off-by: Florian Westphal <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Do not write-protect the kernel read-only and __ro_after_init sections
earlier than before mark_rodata_ro() is called. This fixes a boot issue on
parisc which is triggered by commit 91a1d97ef482 ("jump_label,module: Don't
alloc static_key_mod for __ro_after_init keys"). That commit may modify
static key contents in the __ro_after_init section at bootup, so this
section needs to be writable at least until mark_rodata_ro() is called.
Signed-off-by: Helge Deller <[email protected]>
Reported-by: matoro <[email protected]>
Reported-by: Christoph Biedl <[email protected]>
Tested-by: Christoph Biedl <[email protected]>
Link: https://lore.kernel.org/linux-parisc/[email protected]/#r
Fixes: 91a1d97ef482 ("jump_label,module: Don't alloc static_key_mod for __ro_after_init keys")
Cc: [email protected] # v6.10+
|
|
Jinjie Ruan says:
====================
net: Simplified with scoped function
Simplify with scoped for each OF child loop, as well as dev_err_probe().
Changes in v4:
- Drop the fix patch and __free() patch.
- Rebased on the fix patch has been stripped out.
- Remove the extra parentheses.
- Ensure Signed-off-by: should always be last.
- Add Reviewed-by.
- Update the cover letter commit message.
Changes in v3:
- Sort the variables, longest first, shortest last.
- Add Reviewed-by.
Changes in v2:
- Subject prefix: next -> net-next.
- Split __free() from scoped for each OF child loop clean.
- Fix use of_node_put() instead of __free() for the 5th patch.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when
iterating over device nodes to make code a bit simpler.
Reviewed-by: Florian Fainelli <[email protected]>
Reviewed-by: Justin Chen <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_available_child_of_node_scoped().
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Use scoped for_each_available_child_of_node_scoped() when iterating
over device nodes to make code a bit simpler.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Use the dev_err_probe() helper to simplify code.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Avoids the need for manual cleanup of_node_put() in early exits
from the loop by using for_each_available_child_of_node_scoped().
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Avoid need to manually handle of_node_put() by using
for_each_available_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Avoid need to manually handle of_node_put() by using
for_each_child_of_node_scoped(), which can simplfy code.
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The call of of_get_child_by_name() will cause refcount incremented
for leds, if it succeeds, it should call of_node_put() to decrease
it, fix it.
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jinjie Ruan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The last_sub_index field is not used and appears to be a leftover
from a previous implementation, remove it.
Signed-off-by: Daniel Gabay <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240901071542.da75cfef9144.I6e1fb635b2893618e6bd28501fb858042d8aa44e@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
These are not mvm specific
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.22e28b56da2c.Ib859a05ed133fa5a1426c5feffa8999a18bba6f2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This is not mvm specific.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.57efe93c2702.I4619885f691cc295cc440a62f23405392da338f4@changeid
Signed-off-by: Johannes Berg <[email protected]>
|