aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-27staging: comedi: jr3_pci: fix iomem dereferenceIan Abbott1-1/+1
Correct a direct dereference of I/O memory to use an appropriate I/O memory access function. Note that the pointer being dereferenced is not currently tagged with `__iomem` but I plan to correct that for 3.7. Cc: stable <[email protected]> Signed-off-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-27x86, smep, smap: Make the switching functions one-wayH. Peter Anvin1-31/+18
There is no fundamental reason why we should switch SMEP and SMAP on during early cpu initialization just to switch them off again. Now with %eflags and %cr4 forced to be initialized to a clean state, we only need the one-way enable. Also, make the functions inline to make them (somewhat) harder to abuse. This does mean that SMEP and SMAP do not get initialized anywhere near as early. Even using early_param() instead of __setup() doesn't give us control early enough to do this during the early cpu initialization phase. This seems reasonable to me, because SMEP and SMAP should not matter until we have userspace to protect ourselves from, but it does potentially make it possible for a bug involving a "leak of permissions to userspace" to get uncaught. Signed-off-by: H. Peter Anvin <[email protected]>
2012-09-27perf trace: Add aliases for some syscallsArnaldo Carvalho de Melo1-8/+18
What we get from audit_syscall_to_name isn't what we find in the syscalls: tracepoint events, so add the alias that allows the tool to find prctl, fstat, fstatat and stat. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-27USB: Fix race condition when removing host controllersAlan Stern2-5/+3
This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern <[email protected]> Reported-by: Don Zickus <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-27USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irqJoachim Eastwood1-1/+2
Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood <[email protected]> Cc: stable <[email protected]> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-27um: kill thread->forkingAl Viro7-66/+29
we only use that to tell copy_thread() done by syscall from that done by kernel_thread(). However, it's easier to do simply by checking PF_KTHREAD in thread flags. Merge sys_clone() guts for 32bit and 64bit, while we are at it... Signed-off-by: Al Viro <[email protected]>
2012-09-27um: let signal_delivered() do SIGTRAP on singlestepping into handlerAl Viro2-7/+5
... rather than duplicating that in sigframe setup code (and doing that inconsistently, at that) Signed-off-by: Al Viro <[email protected]>
2012-09-27um: don't leak floating point state and segment registers on execve()Al Viro1-0/+1
Signed-off-by: Al Viro <[email protected]>
2012-09-27um: take cleaning singlestep to start_thread()Al Viro1-19/+5
... assuming it's needed to be done at all Signed-off-by: Al Viro <[email protected]>
2012-09-27perf probe: Print an enum type variable in "enum variable-name" format when ↵Hyeoncheol Lee1-0/+2
showing accessible variables When showing accessible variables, an enum type variable was printed in "variable-name" format. Change this format into "enum variable-name". Signed-off-by: Hyeoncheol Lee <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Cc: Masami Hiramatsu <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-27perf tools: Check libaudit availability for perf-trace builtinNamhyung Kim3-2/+27
The newly added trace command requires an external audit library. However it can cause a build error because it's not checked whether the libaudit is installed on system: CC builtin-trace.o builtin-trace.c:7:22: fatal error: libaudit.h: No such file or directory compilation terminated. make: *** [builtin-trace.o] Error 1 Signed-off-by: Namhyung Kim <[email protected]> Cc: David Ahern <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] [ committer note: Added ", disables 'trace tool' to the feature warning msg ] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-27arm64: ptrace: remove obsolete ptrace request numbers from user headersWill Deacon2-17/+12
The use of regsets has removed the need for many private ptrace requests, so remove the corresponding definitions from the user-visible ptrace.h Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2012-09-27doc: fix old config name of kprobetraceLiu Bo1-1/+1
KPROBE_TRACING has been replaced by KPROBE_EVENT. Signed-off-by: Liu Bo <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2012-09-27Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie2-2/+4
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Another spurious dmesg quitening. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
2012-09-27Merge branch 'rcu/idle' of ↵Ingo Molnar17-79/+407
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull the RCU adaptive-idle feature from Paul E. McKenney: "This series adds RCU APIs that allow non-idle tasks to enter RCU idle mode and provides x86 code to make use of them, allowing RCU to treat user-mode execution as an extended quiescent state when the new RCU_USER_QS kernel configuration parameter is specified. Work is in progress to port this to a few other architectures, but is not part of this series." Signed-off-by: Ingo Molnar <[email protected]>
2012-09-27perf/x86: Fix typo in uncore_pmu_to_boxYan, Zheng1-1/+1
The variable box should not be declared as static. This could probably cause crashes with sufficiently parallel uncore PMU use. Signed-off-by: Yan, Zheng <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2012-09-26CIFS: Fix possible freed pointer dereference in CIFS_SessSetupPavel Shilovsky1-1/+2
Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2012-09-26CIFS: Fix possible freed pointer dereference in SMB2_sess_setupPavel Shilovsky1-32/+3
and remove redundant (rsp == NULL) checks after SendReceive2. Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2012-09-26CIFS: Make ops->close return voidPavel Shilovsky4-8/+8
Signed-off-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2012-09-27md/raid10: fix "enough" function for detecting if array is failed.NeilBrown1-3/+5
The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: [email protected] Reported-by: Jakub Husák <[email protected]> Signed-off-by: NeilBrown <[email protected]>
2012-09-26ARM: Orion5x: Fix too small coherent pool.Andrew Lunn1-0/+7
Some Orion5x devices allocate their coherent buffers from atomic context. Increase size of atomic coherent pool to make sure such the allocations won't fail during boot. Signed-off-by: Andrew Lunn <[email protected]> Acked-by: Jason Cooper <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2012-09-26perf hists: Add missing period_* fields when collapsing a hist entryNamhyung Kim1-2/+7
So that the perf report won't lost the cpu utilization information. For example, if there're two process that have same name. $ perf report --stdio --showcpuutilization -s pid [SNIP] # Overhead sys us Command: Pid # ........ ........ ........ ............. # 55.12% 0.01% 55.10% noploop:28781 44.88% 0.06% 44.83% noploop:28782 Before: $ perf report --stdio --showcpuutilization -s comm [SNIP] # Overhead sys us # ........ ........ ........ # 100.00% 0.06% 44.83% After: $ perf report --stdio --showcpuutilization -s comm [SNIP] # Overhead sys us # ........ ........ ........ # 100.00% 0.07% 99.93% Signed-off-by: Namhyung Kim <[email protected]> Cc: Arun Sharma <[email protected]> Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-26perf trace: New toolArnaldo Carvalho de Melo6-1/+358
Initially should look loosely like the venerable 'strace' tool, but using the infrastructure in the perf tools to allow tracing extra targets: [acme@sandy linux]$ perf trace --hell Error: unknown option `hell' usage: perf trace <PID> -p, --pid <pid> trace events on existing process id --tid <tid> trace events on existing thread id --all-cpus system-wide collection from all CPUs --cpu <cpu> list of cpus to monitor --no-inherit child tasks do not inherit counters --mmap-pages <n> number of mmap data pages --uid <user> user to profile [acme@sandy linux]$ Those should have the same semantics as when using with 'perf record'. It gets stuck sometimes, but hey, it works sometimes too! In time it should support perf.data based workloads, i.e. it should have a: -o filename Command line option that will produce a perf.data file that can then be used with 'perf trace' or any of the other perf tools (script, report, etc). It will also eventually have the set of functionalities described in the previous 'trace' prototype by Thomas Gleixner: "Announcing a new utility: 'trace'" http://lwn.net/Articles/415728/ Also planned is to have some of the features suggested in the comments of that LWN article. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-26perf evsel: Export the event_format constructorArnaldo Carvalho de Melo2-1/+4
It'll be needed in the next patches, where it'll be not associated directly to an evsel. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-26perf evsel: Introduce rawptr() methodArnaldo Carvalho de Melo2-2/+9
Will be used for things like the args field in the raw_syscalls:sys_enter tracepoint. Implement strval with it, its basicaly strval returning void *. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-27drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_ENBen Skeggs2-2/+4
PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO, the binary driver appears to completely ignore it in its PFIFO interrupt handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init time. The bits still light up in the hardware sometimes though, so lets just ignore any bits we haven't explicitely requested. Signed-off-by: Ben Skeggs <[email protected]>
2012-09-26dm verity: fix overflow checkMikulas Patocka1-4/+4
This patch fixes sector_t overflow checking in dm-verity. Without this patch, the code checks for overflow only if sector_t is smaller than long long, not if sector_t and long long have the same size. Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm thin: fix discard support for data devicesMike Snitzer1-30/+57
The discard limits that get established for a thin-pool or thin device may be incompatible with the pool's data device. Avoid this by checking the discard limits of the pool's data device. If an incompatibility is found then the pool's 'discard passdown' feature is disabled. Change thin_io_hints to ensure that a thin device always uses the same queue limits as its pool device. Introduce requested_pf to track whether or not the table line originally contained the no_discard_passdown flag and use this directly for table output. We prepare the correct setting for discard_passdown directly in bind_control_target (called from pool_io_hints) and store it in adjusted_pf rather than waiting until we have access to pool->pf in pool_preresume. Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Joe Thornber <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm thin: tidy discard supportMike Snitzer1-25/+39
A little thin discard code refactoring to make the next patch (dm thin: fix discard support for data devices) more readable. Pull out a couple of functions (and uses bools instead of unsigned for features). No functional changes. Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Joe Thornber <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm: retain table limits when swapping to new table with no devicesMike Snitzer3-1/+50
Add a safety net that will re-use the DM device's existing limits in the event that DM device has a temporary table that doesn't have any component devices. This is to reduce the chance that requests not respecting the hardware limits will reach the device. DM recalculates queue limits based only on devices which currently exist in the table. This creates a problem in the event all devices are temporarily removed such as all paths being lost in multipath. DM will reset the limits to the maximum permissible, which can then assemble requests which exceed the limits of the paths when the paths are restored. The request will fail the blk_rq_check_limits() test when sent to a path with lower limits, and will be retried without end by multipath. This became a much bigger issue after v3.6 commit fe86cdcef ("block: do not artificially constrain max_sectors for stacking drivers"). Reported-by: David Jeffery <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm table: clear add_random unless all devices have it setMilan Broz1-4/+22
Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not have it set. Otherwise devices with predictable characteristics may contribute entropy. QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings contribute to the random pool. For bio-based targets this flag is always 0 because such devices have no real queue. For request-based devices this flag was always set to 1 by default. Now set it according to the flags on underlying devices. If there is at least one device which should not contribute, set the flag to zero: If a device, such as fast SSD storage, is not suitable for supplying entropy, a request-based queue stacked over it will not be either. Because the checking logic is exactly same as for the rotational flag, share the iteration function with device_is_nonrot(). Signed-off-by: Milan Broz <[email protected]> Cc: [email protected] Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm: handle requests beyond end of device instead of using BUG_ONMike Snitzer1-18/+38
The access beyond the end of device BUG_ON that was introduced to dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement REQ_FLUSH/FUA support for request-based dm") was an overly drastic (but simple) response to this situation. I have received a report that this BUG_ON was hit and now think it would be better to use dm_kill_unmapped_request() to fail the clone and original request with -EIO. map_request() will assign the valid target returned by dm_table_find_target to tio->ti. But when the target isn't valid tio->ti is never assigned (because map_request isn't called); so add a check for tio->ti != NULL to dm_done(). Reported-by: Mike Christie <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Jun'ichi Nomura <[email protected]> Cc: [email protected] # v2.6.37+ Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm mpath: only retry ioctl when no paths if queue_if_no_path setMike Snitzer1-4/+7
When there are no paths and multipath receives an ioctl, it waits until a path becomes available. This behaviour is incorrect if the "queue_if_no_path" setting was not specified, as then the ioctl should be rejected immediately, which this patch now does. commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should have checked if queue_if_no_path was configured before queueing IO. Checking for the queue_if_no_path feature, like is done in map_io(), allows the following table load to work without blocking in the multipath_ioctl retry loop: echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs Without this fix the multipath_ioctl will block with the following stack trace: blkid D 0000000000000002 0 23936 1 0x00000000 ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440 ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440 ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040 Call Trace: [<ffffffff814ce099>] schedule+0x29/0x70 [<ffffffff814cc312>] schedule_timeout+0x182/0x2e0 [<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70 [<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff8104f840>] msleep+0x20/0x30 [<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath] [<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod] [<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30 [<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730 [<ffffffff811970ac>] block_ioctl+0x3c/0x40 [<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81166293>] ? sys_newfstat+0x33/0x40 [<ffffffff81173571>] sys_ioctl+0xa1/0xb0 [<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b Signed-off-by: Mike Snitzer <[email protected]> Cc: [email protected] # 3.5+ Acked-by: Mikulas Patocka <[email protected]> Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26dm thin: do not set discard_zeroes_dataMike Snitzer1-1/+1
The dm thin pool target claims to support the zeroing of discarded data areas. This turns out to be incorrect when processing discards that do not exactly cover a complete number of blocks, so the target must always set discard_zeroes_data_unsupported. The thin pool target will zero blocks when they are allocated if the skip_block_zeroing feature is not specified. The block layer may send a discard that only partly covers a block. If a thin pool block is partially discarded then there is no guarantee that the discarded data will get zeroed before it is accessed again. Due to this, thin devices cannot claim discards will always zero data. Signed-off-by: Mike Snitzer <[email protected]> Signed-off-by: Joe Thornber <[email protected]> Cc: [email protected] # 3.4+ Signed-off-by: Alasdair G Kergon <[email protected]>
2012-09-26x86, suspend: On wakeup always initialize cr4 and EFERH. Peter Anvin3-15/+31
We already have a flag word to indicate the existence of MISC_ENABLES, so use the same flag word to indicate existence of cr4 and EFER, and always restore them if they exist. That way if something passes a nonzero value when the value *should* be zero, we will still initialize it. Signed-off-by: H. Peter Anvin <[email protected]> Cc: Rafael J. Wysocki <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2012-09-26x86-32: Start out eflags and cr4 cleanH. Peter Anvin1-15/+16
%cr4 is supposed to reflect a set of features into which the operating system is opting in. If the BIOS or bootloader leaks bits here, this is not desirable. Consider a bootloader passing in %cr4.pae set to a legacy paging kernel, for example -- it will not have any immediate effect, but the kernel would crash when turning paging on. A similar argument applies to %eflags, and since we have to look for %eflags.id being settable we can use a sequence which clears %eflags as a side effect. Note that we already do this for x86-64. Signed-off-by: H. Peter Anvin <[email protected]> Link: http://lkml.kernel.org/r/[email protected]
2012-09-26perf tools: Use perf_evsel__newtp in the event parserArnaldo Carvalho de Melo1-30/+16
Elliminating code duplication. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-26perf evsel: The tracepoint constructor should store sys:nameArnaldo Carvalho de Melo1-4/+5
Not event_format->name, that doesn't contains the sys: part. Cc: David Ahern <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2012-09-26Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds3-28/+4
Pull c6x arch fixes from Mark Salter: - Add __NR_kcmp to generic syscall list - C6X: Use generic asm/barrier.h * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: syscalls: add __NR_kcmp syscall to generic unistd.h c6x: use asm-generic/barrier.h
2012-09-26MAINTAINERS: update Intel C600 SAS driver maintainersDave Jiang1-3/+4
Cc: Lukasz Dorau <[email protected]> Cc: Maciej Patelczyk <[email protected]> Signed-off-by: Dave Jiang <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2012-09-26staging: comedi: drivers: use comedi_fc.h cmdtest helpersH Hartley Sweeten46-1997/+766
Use the cfc_check_trigger_src() helper for Step 1 in all the driver cmdtest functions. Use the cfc_check_trigger_is_unique() helper for Step 2 in all the driver cmdtest functions. Note that single source triggers do not need to be checked, they are already unique if they pass Step 1. For aesthetic reasons, change the comments in the cmdtest functions for steps 1 and 2 so that they are all the same. Signed-off-by: H Hartley Sweeten <[email protected]> Cc: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26USB: ezusb: move ezusb.c from drivers/usb/serial to drivers/usb/miscRene Buergel5-10/+10
This patch - moves drivers/usb/serial/ezusb.c to drivers/usb/misc/ - renamed CONFIG_USB_EZUSB to CONFIG_USB_EZUSB_FX2 to avoid build errors - adapts Makefiles and Kconfigs switching from bool to tristate for CONFIG_USB_EZUSB_FX2 Signed-off-by: René Bürgel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree initAnilKumar Ch2-0/+59
Add lis3lv02d device tree initialization code/API to take pdata from device node. Also adds device tree init matching table support to lis3lv02d_i2c driver. If the driver data is passed from device tree, then this driver picks up platform data from device node through common/generic lis3lv02d.c driver. [[email protected]: fix CONFIG_OF=n build] Signed-off-by: AnilKumar Ch <[email protected]> Cc: Eric Piel <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Cc: Mark Brown <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree initAnilKumar Ch1-2/+6
Add lis3lv02d device tree initialization code/API to take pdata from device node. Also remove CONFIG_OF ifdef from the driver, if CONFIG_OF is not defined then OF APIs returns 0. [[email protected]: fix CONFIG_OF=n build[ Signed-off-by: AnilKumar Ch <[email protected]> Cc: Eric Piel <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Cc: Mark Brown <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26drivers/misc/lis3lv02d: remove lis3lv02d driver DT initAnilKumar Ch2-6/+3
Remove lis3lv02d driver device tree initialization from core driver and move it to individual drivers. With the current implementation some pdata parameters are missing if we use lis3lv02d_init_device() in lis3lv02d_i2c driver. Signed-off-by: AnilKumar Ch <[email protected]> Cc: Eric Piel <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Cc: Mark Brown <[email protected]> Cc: Tony Lindgren <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru codeDaniel Mack1-0/+17
If probed from a device tree, this driver now passes the node information to the generic part, so the runtime information can be derived. Successfully tested on a PXA3xx board. [[email protected]: fix lis302dl_spi_dt_ids unused warning when CONFIG_OF=n] Signed-off-by: Daniel Mack <[email protected]> Cc: Rob Herring <[email protected]> Cc: "AnilKumar, Chimata" <[email protected]> Reviewed-by: Éric Piel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26drivers/misc/lis3lv02d: add generic DT matching codeDaniel Mack3-0/+233
Adds logic to parse lis3 properties from a device tree node and store them in a freshly allocated lis3lv02d_platform_data. Note that the actual match tables are left out here. This part should happen in the drivers that bind to the individual busses (SPI/I2C/PCI). Also adds some DT bindinds documentation. Signed-off-by: Daniel Mack <[email protected]> Cc: Rob Herring <[email protected]> Cc: "AnilKumar, Chimata" <[email protected]> Reviewed-by: Éric Piel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26USB: uas: fix gcc warningGerd Hoffmann1-10/+8
Streamline control flow so it is easier for gcc to follow which paths can be taken and which can't. Fixes "warning: 'cmdinfo' may be used uninitialized in this function" Signed-off-by: Gerd Hoffmann <[email protected]> Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26USB: uas: fix lockingGerd Hoffmann1-0/+2
Forgot to unlock in the uas_eh_task_mgmt error paths. Signed-off-by: Gerd Hoffmann <[email protected]> Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2012-09-26memory: tegra{20,30}-mc: Fix reading incorrect register in mc_readl()Axel Lin2-22/+10
The code reading the register does not match the code writing to the register, fix it. Also fix the coding style in mc_writel() for better readability. Signed-off-by: Axel Lin <[email protected]> Acked-by: Stephen Warren <[email protected]> Tested-by: Stephen Warren <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.