aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-28igc: Remove symbol error counterSasha Neftin3-3/+0
Accordance to the i225 datasheet symbol error counter does not applicable to the i225 device. This patch comes to clean up this counter. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: Make i40e_shutdown_adminq() return voidJason Yan2-6/+2
Fix the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_adminq.c:699:13-21: Unneeded variable: "ret_code". Return "0" on line 710 Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28e1000e: Relax condition to trigger reset for ME workaroundPunit Agrawal2-8/+5
It's an error if the value of the RX/TX tail descriptor does not match what was written. The error condition is true regardless the duration of the interference from ME. But the driver only performs the reset if E1000_ICH_FWSM_PCIM2PCI_COUNT (2000) iterations of 50us delay have transpired. The extra condition can lead to inconsistency between the state of hardware as expected by the driver. Fix this by dropping the check for number of delay iterations. While at it, also make __ew32_prepare() static as it's not used anywhere else. CC: stable <stable@vger.kernel.org> Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28igc: Fix IGC_MAX_RXNFC_RULESAndre Guedes1-1/+4
IGC supports a total of 32 rules. 16 MAC address based, 8 VLAN priority based, and 8 Ethertype based. This patch fixes IGC_MAX_RXNFC_RULES accordingly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28igc: Reject NFC rules with multiple matchesAndre Guedes1-5/+4
The way Rx queue assignment based on mac address, Ethertype and VLAN priority filtering operates in I225 doesn't allow us to properly support NFC rules with multiple matches. Consider the following example which assigns to queue 2 frames matching the address MACADDR *and* Ethertype ETYPE. $ ethtool -N eth0 flow-type ether dst <MACADDR> proto <ETYPE> queue 2 When such rule is applied, we have 2 unwanted behaviors: 1) Any frame matching MACADDR will be assigned to queue 2. It doesn't matter the ETYPE value. 2) Any accepted frame that has Ethertype equals to ETYPE, no matter the mac address, will be assigned to queue 2 as well. In current code, multiple-match filters are accepted by the driver, even though it doesn't support them properly. This patch adds a check for multiple-match rules in igc_ethtool_is_nfc_rule_valid() so they are rejected. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28igc: Remove unused flagsSasha Neftin1-4/+0
Transmit underrun, late and excess collision flags not in use. This patch comes to clean up these flags. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28igb: make igb_set_fc_watermarks() return voidJason Yan1-6/+3
This function always return 0 now, we can make it return void to simplify the code. This fixes the following coccicheck warning: drivers/net/ethernet/intel/igb/e1000_mac.c:728:5-12: Unneeded variable: "ret_val". Return "0" on line 751 Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: Remove unused inline function ixgbe_irq_disable_queuesYueHaibing1-29/+0
commit b5f69ccf6765 ("ixgbe: avoid bringing rings up/down as macvlans are added/removed") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: Use true, false for bool variable in __ixgbe_enable_sriov()Jason Yan1-1/+1
Fix the following coccicheck warning: drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c:105:2-38: WARNING: Assignment of 0/1 to bool variable Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: Remove conversion to bool in ixgbe_device_supports_autoneg_fc()Jason Yan1-2/+1
No need to convert '==' expression to bool. This fixes the following coccicheck warning: drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:68:11-16: WARNING: conversion to bool not needed here Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28ixgbe: fix signed-integer-overflow warningXie XiuQi1-1/+1
ubsan report this warning, fix it by adding a unsigned suffix. UBSAN: signed-integer-overflow in drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:2246:26 65535 * 65537 cannot be represented in type 'int' CPU: 21 PID: 7 Comm: kworker/u256:0 Not tainted 5.7.0-rc3-debug+ #39 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 03/27/2020 Workqueue: ixgbe ixgbe_service_task [ixgbe] Call trace: dump_backtrace+0x0/0x3f0 show_stack+0x28/0x38 dump_stack+0x154/0x1e4 ubsan_epilogue+0x18/0x60 handle_overflow+0xf8/0x148 __ubsan_handle_mul_overflow+0x34/0x48 ixgbe_fc_enable_generic+0x4d0/0x590 [ixgbe] ixgbe_service_task+0xc20/0x1f78 [ixgbe] process_one_work+0x8f0/0xf18 worker_thread+0x430/0x6d0 kthread+0x218/0x238 ret_from_fork+0x10/0x18 Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: trivial fixup of comments in i40e_xsk.cJesper Dangaard Brouer1-3/+1
The comment above i40e_run_xdp_zc() was clearly copy-pasted from function i40e_xsk_umem_setup, which is just above. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28i40e: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-12/+12
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-28Merge branch 'hns3-next'David S. Miller8-79/+31
Huazhong Tan says: ==================== net: hns3: misc updates for -next This patchset includes some updates for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: print out speed info when parsing speed failsHuazhong Tan1-1/+2
When calling hclge_parse_speed() fails, printing out the speed is helpful for debugging. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hclge_devHuazhong Tan1-6/+0
Remove some fields in struct hclge_dev which have not been used. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove two duplicated register macros in hclgevf_main.hHuazhong Tan2-6/+4
HCLGEVF_CMDQ_INTR_SRC_REG and HCLGEVF_CMDQ_INTR_STS_REG are same as HCLGEVF_VECTOR0_CMDQ_SRC_REG and HCLGEVF_VECTOR0_CMDQ_STAT_REG, replace the former with the latter, and rename macro HCLGEVF_VECTOR0_CMDQ_STAT_REG since 'stat' is not abbreviation of 'state'. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove unused struct hnae3_unic_private_infoHuazhong Tan1-11/+0
Since field .uinfo in struct hnae3_handle never be used, so remove it and its structure definition. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3; remove unused HNAE3_RESTORE_CLIENT in enum hnae3_reset_notify_typeHuazhong Tan1-1/+0
Remove HNAE3_RESTORE_CLIENT which is not needed now. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove some unused fields in struct hns3_nic_privHuazhong Tan1-22/+0
Remove some fileds which defined in struct hns3_nic_priv, but not used, and remove the related definition of struct hns3_udp_tunnel and enum hns3_udp_tnl_type. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclgevf_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclgevf_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: modify an incorrect type in struct hclge_cfg_gro_status_cmdHuazhong Tan2-3/+3
Modify field .gro_en in struct hclge_cfg_gro_status_cmd to u8 according to the UM, otherwise, it will overwrite the reserved byte which may be used for other purpose. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_query_bd_num_cmd_send()Huazhong Tan1-9/+12
In order to improve code maintainability and readability, rewrite the process of BDs' initialization in hclge_query_bd_num_cmd_send(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: refactor hclge_config_tso()Huazhong Tan1-13/+4
Since parameters 'tso_mss_min' and 'tso_mss_max' only indicate the minimum and maximum MSS, the hnae3_set_field() calls are meaningless, remove them and change the type of these two parameters to u16. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: add a missing mutex destroy in hclge_init_ad_dev()Huazhong Tan1-0/+1
Add a mutex destroy call in hclge_init_ae_dev() when fails. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: hns3: remove an unnecessary 'goto' in hclge_init_ae_dev()Huazhong Tan1-4/+2
Remove the redundant 'goto' and return -ENOMEM directly, when allocating memory for 'hdev' fails in hclge_init_ae_dev(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'net-ks8851-Unify-KS8851-SPI-and-MLL-drivers'David S. Miller7-1953/+1135
Marek Vasut says: ==================== net: ks8851: Unify KS8851 SPI and MLL drivers The KS8851SNL/SNLI and KS8851-16MLL/MLLI/MLLU are very much the same pieces of silicon, except the former has an SPI interface, while the later has a parallel bus interface. Thus far, Linux has two separate drivers for each and they are diverging considerably. This series unifies them into a single driver with small SPI and parallel bus specific parts. The approach here is to first separate out the SPI specific parts into a separate file, then add parallel bus accessors in another separate file and then finally remove the old parallel bus driver. The reason for replacing the old parallel bus driver is because the SPI bus driver is much higher quality. Note that I dropped "net: ks8851: Drop define debug and pr_fmt()" for now, will send it separatelly later. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Remove ks8851_mll.cMarek Vasut1-1393/+0
The ks8851_mll.c is replaced by ks8851_par.c, which is using common code from ks8851.c, just like ks8851_spi.c . Remove this old ad-hoc driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Implement Parallel bus operationsMarek Vasut3-0/+360
Implement accessors for KS8851-16MLL/MLLI/MLLU parallel bus variant of the KS8851. This is based off the ks8851_mll.c , which is a driver for exactly the same hardware, however the ks8851.c code is much higher quality. Hence, this patch pulls out the relevant information from the ks8851_mll.c on how to access the bus, but uses the common ks8851.c code. To make this patch reviewable, instead of rewriting ks8851_mll.c, ks8851_mll.c is removed in a separate subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Separate SPI operations into separate fileMarek Vasut4-597/+642
Pull all the SPI bus specific code into a separate file, so that it is not mixed with the common code. Rename ks8851.c to ks8851_common.c. The ks8851_common.c is linked with ks8851_spi.c now, so it can call the accessors in the ks8851_spi.c without any pointer indirection. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Implement register, FIFO, lock accessor callbacksMarek Vasut1-22/+156
The register and FIFO accessors are bus specific, so is locking. Implement callbacks so that each variant of the KS8851 can implement matching accessors and locking, and use the rest of the common code. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Permit overridding interrupt enable registerMarek Vasut1-11/+11
The parallel bus variant does not need to use the TX interrupt at all as it writes the TX FIFO directly with in .ndo_start_xmit, permit the drivers to configure the interrupt enable bits. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out TX work flush functionMarek Vasut1-4/+12
While the SPI version of the KS8851 requires a TX worker thread to pump data via SPI, the parallel bus version can write data into the TX FIFO directly in .ndo_start_xmit, as the parallel bus access is much faster and does not sleep. Factor out this TX work flush part, so it can be overridden by the parallel bus driver. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Split out SPI specific code from probe() and remove()Marek Vasut1-38/+48
Factor out common code into ks8851_probe_common() and ks8851_remove_common() to permit both SPI and parallel bus driver variants to use the common code path for both probing and removal. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Split out SPI specific entries in struct ks8851_netMarek Vasut1-49/+79
Add a new struct ks8851_net_spi, which embeds the original struct ks8851_net and contains the entries specific only to the SPI variant of KS8851. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out SKB receive functionMarek Vasut1-1/+10
Factor out this netif_rx_ni(), so it could be overridden by the parallel bus variant of the KS8851 driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out bus lock handlingMarek Vasut1-29/+68
Pull out bus access locking code into separate functions, this is done in preparation for unifying the driver with the parallel bus one. The parallel bus driver does not need heavy mutex locking of the bus and works better with spinlocks, hence prepare these locking functions to be overridden then. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use 16-bit read of RXFC registerMarek Vasut1-16/+1
The RXFC register is the only one being read using 8-bit accessors. To make it easier to support the 16-bit accesses used by the parallel bus variant of KS8851, use 16-bit accessor to read RXFC register as well as neighboring RXFCTR register. Remove ks8851_rdreg8() as it is not used anywhere anymore. There should be no functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use 16-bit writes to program MAC addressMarek Vasut2-35/+14
On the SPI variant of KS8851, the MAC address can be programmed with either 8/16/32-bit writes. To make it easier to support the 16-bit parallel option of KS8851 too, switch both the MAC address programming and readout to 16-bit operations. Remove ks8851_wrreg8() as it is not used anywhere anymore. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Remove ks8851_rdreg32()Marek Vasut1-23/+2
The ks8851_rdreg32() is used only in one place, to read two registers using a single read. To make it easier to support 16-bit accesses via parallel bus later on, replace this single read with two 16-bit reads from each of the registers and drop the ks8851_rdreg32() altogether. If this has noticeable performance impact on the SPI variant of KS8851, then we should consider using regmap to abstract the SPI and parallel bus options and in case of SPI, permit regmap to merge register reads of neighboring registers into single, longer, read. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use dev_{get,set}_drvdata()Marek Vasut1-2/+4
Replace spi_{get,set}_drvdata() with dev_{get,set}_drvdata(), which works for both SPI and platform drivers. This is done in preparation for unifying the KS8851 SPI and parallel bus drivers. There should be no functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Use devm_alloc_etherdev()Marek Vasut1-9/+4
Use device managed version of alloc_etherdev() to simplify the code. No functional change intended. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Pass device node into ks8851_init_mac()Marek Vasut1-3/+4
Since the driver probe function already has a struct device *dev pointer and can easily derive of_node pointer from it, pass the of_node pointer as a parameter to ks8851_init_mac() to avoid fishing it out from ks->spidev. This is the only reference to spidev in the function, so get rid of it. This is done in preparation for unifying the KS8851 SPI and parallel bus drivers. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Replace dev_err() with netdev_err() in IRQ handlerMarek Vasut1-1/+1
Use netdev_err() instead of dev_err() to avoid accessing the spidev->dev in the interrupt handler. This is the only place which uses the spidev in this function, so replace it with netdev_err() to get rid of it. This is done in preparation for unifying the KS8851 SPI and parallel drivers. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Rename ndev to netdev in probeMarek Vasut1-15/+15
Rename ndev variable to netdev for the sake of consistency. No functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28net: ks8851: Factor out spi->dev in probe()/remove()Marek Vasut1-15/+14
Pull out the spi->dev into one common place in the function instead of having it repeated over and over again. This is done in preparation for unifying ks8851 and ks8851-mll drivers. No functional change. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Lukas Wunner <lukas@wunner.de> Cc: Petr Stetiar <ynezz@true.cz> Cc: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28Merge branch 'vmxnet3-upgrade-to-version-4'David S. Miller6-42/+448
Ronak Doshi says: ==================== vmxnet3: upgrade to version 4 vmxnet3 emulation has recently added several new features which includes offload support for tunnel packets, support for new commands the driver can issue to emulation, change in descriptor fields, etc. This patch series extends the vmxnet3 driver to leverage these new features. Compatibility is maintained using existing vmxnet3 versioning mechanism as follows: - new features added to vmxnet3 emulation are associated with new vmxnet3 version viz. vmxnet3 version 4. - emulation advertises all the versions it supports to the driver. - during initialization, vmxnet3 driver picks the highest version number supported by both the emulation and the driver and configures emulation to run at that version. In particular, following changes are introduced: Patch 1: This patch introduces utility macros for vmxnet3 version 4 comparison and updates Copyright information. Patch 2: This patch implements get_rss_hash_opts and set_rss_hash_opts methods to allow querying and configuring different Rx flow hash configurations which can be used to support UDP/ESP RSS. Patch 3: This patch introduces segmentation and checksum offload support for encapsulated packets. This avoids segmenting and calculating checksum for each segment and hence gives performance boost. Patch 4: With all vmxnet3 version 4 changes incorporated in the vmxnet3 driver, with this patch, the driver can configure emulation to run at vmxnet3 version 4. Changes in v3 -> v4: - Replaced BUG_ON() with WARN_ON_ONCE() Changes in v2 -> v3: - fixed get_rss_hash_opts to return correct values for udp rss Changes in v2: - Fixed compilation issue due to missing closed brace - added fallthrough comment ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28vmxnet3: update to version 4Ronak Doshi2-3/+8
With all vmxnet3 version 4 changes incorporated in the vmxnet3 driver, the driver can configure emulation to run at vmxnet3 version 4, provided the emulation advertises support for version 4. Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28vmxnet3: add geneve and vxlan tunnel offload supportRonak Doshi5-33/+161
Vmxnet3 version 3 device supports checksum/TSO offload. Thus, vNIC to pNIC traffic can leverage hardware checksum/TSO offloads. However, vmxnet3 does not support checksum/TSO offload for Geneve/VXLAN encapsulated packets. Thus, for a vNIC configured with an overlay, the guest stack must first segment the inner packet, compute the inner checksum for each segment and encapsulate each segment before transmitting the packet via the vNIC. This results in significant performance penalty. This patch will enhance vmxnet3 to support Geneve/VXLAN TSO as well as checksum offload. Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-28vmxnet3: add support to get/set rx flow hashRonak Doshi4-2/+272
With vmxnet3 version 4, the emulation supports multiqueue(RSS) for UDP and ESP traffic. A guest can enable/disable RSS for UDP/ESP over IPv4/IPv6 by issuing commands introduced in this patch. ESP ipv6 is not yet supported in this patch. This patch implements get_rss_hash_opts and set_rss_hash_opts methods to allow querying and configuring different Rx flow hash configurations. Signed-off-by: Ronak Doshi <doshir@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.