aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-29sfc: use a dynamic m-port for representor RX and set it promiscEdward Cree7-3/+158
Representors do not want to be subject to the PF's Ethernet address filters, since traffic from VFs will typically have a destination either elsewhere on the link segment or on an overlay network. So, create a dynamic m-port with promiscuous and all-multicast filters, and set it as the egress port of representor default rules. Since the m-port is an alias of the calling PF's own m-port, traffic will still be delivered to the PF's RXQs, but it will be subject to the VNRX filter rules installed on the dynamic m-port (specified by the v-port ID field of the filter spec). Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: move table locking into filter_table_{probe,remove} methodsEdward Cree5-36/+33
We need to be able to drop the efx->filter_sem in ef100_filter_table_up() so that we can call functions that insert filters (and thus take that rwsem for read), which means the efx->type->filter_table_probe method needs to be responsible for taking the lock in the first place. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: insert default MAE rules to connect VFs to representorsEdward Cree13-6/+606
Default rules are low-priority switching rules which the hardware uses in the absence of higher-priority rules. Each representor requires a corresponding rule matching traffic from its representee VF and delivering to the PF (where a check on INGRESS_MPORT in __ef100_rx_packet() will direct it to the representor). No rule is required in the reverse direction, because representor TX uses a TX override descriptor to bypass the MAE and deliver directly to the VF. Since inserting any rule into the MAE disables the firmware's own default rules, also insert a pair of rules to connect the PF to the physical network port and vice-versa. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: receive packets from EF100 VFs into representorsEdward Cree3-0/+42
If the source m-port of a packet in __ef100_rx_packet() is a VF, hand off the packet to the corresponding representor with efx_ef100_rep_rx_packet(). Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: check ef100 RX packets are from the wireEdward Cree3-6/+26
If not, for now drop them and warn. A subsequent patch will look up the source m-port to try and find a representor to deliver them to. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: determine wire m-port at EF100 PF probe timeEdward Cree4-0/+50
Traffic delivered to the (MAE admin) PF could be from either the wire or a VF. The INGRESS_MPORT field of the RX prefix distinguishes these; base_mport is the value this field will have for traffic from the wire (which should be delivered to the PF's netdevice, not a representor). Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: ef100 representor RX top halfEdward Cree2-0/+56
Representor RX uses a NAPI context driven by a 'fake interrupt': when the parent PF receives a packet destined for the representor, it adds it to an SKB list (efv->rx_list), and schedules NAPI if the 'fake interrupt' is primed. The NAPI poll then pulls packets off this list and feeds them to the stack with netif_receive_skb_list(). This scheme allows us to decouple representor RX from the parent PF's RX fast-path. This patch implements the 'top half', which builds an SKB, copies data into it from the RX buffer (which can then be released), adds it to the queue and fires the 'fake interrupt' if necessary. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: ef100 representor RX NAPI pollEdward Cree2-0/+75
This patch adds the 'bottom half' napi->poll routine for representor RX. See the next patch (with the top half) for an explanation of the 'fake interrupt' scheme used to drive this NAPI context. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29sfc: plumb ef100 representor statsEdward Cree1-0/+14
Implement .ndo_get_stats64() method to read values out of struct efx_rep_sw_stats. Signed-off-by: Edward Cree <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29Merge tag 'mm-hotfixes-stable-2022-07-29' of ↵Linus Torvalds2-15/+16
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "Two hotfixes, both cc:stable" * tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/hmm: fault non-owner device private entries page_alloc: fix invalid watermark check on a negative value
2022-07-29net: marvell: prestera: uninitialized variable bugDan Carpenter1-1/+1
The "ret" variable needs to be initialized at the start. Fixes: 52323ef75414 ("net: marvell: prestera: add phylink support") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YuKeBBuGtsmd7QdT@kili Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29dn_route: replace "jiffies-now>0" with "jiffies!=now"Yu Zhe1-1/+1
Use "jiffies != now" to replace "jiffies - now > 0" to make code more readable. We want to put a limit on how long the loop can run for before rescheduling. Signed-off-by: Yu Zhe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29Merge tag 'wireless-next-2022-07-29' of ↵Jakub Kicinski55-1041/+992
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Fourth set of patches for v5.20, last few patches before the merge window. Only driver changes this time, mostly just fixes and cleanup. Major changes: brcmfmac - support brcm,ccode-map-trivial DT property wcn36xx - add debugfs file to show firmware feature strings * tag 'wireless-next-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (36 commits) wifi: rtw88: check the return value of alloc_workqueue() wifi: rtw89: 8852a: adjust IMR for SER L1 wifi: rtw89: 8852a: update RF radio A/B R56 wifi: wcn36xx: Add debugfs entry to read firmware feature strings wifi: wcn36xx: Move capability bitmap to string translation function to firmware.c wifi: wcn36xx: Move firmware feature bit storage to dedicated firmware.c file wifi: wcn36xx: Rename clunky firmware feature bit enum wifi: brcmfmac: prevent double-free on hardware-reset wifi: brcmfmac: support brcm,ccode-map-trivial DT property dt-bindings: bcm4329-fmac: add optional brcm,ccode-map-trivial wifi: brcmfmac: Replace default (not configured) MAC with a random MAC wifi: brcmfmac: Add brcmf_c_set_cur_etheraddr() helper wifi: brcmfmac: Remove #ifdef guards for PM related functions wifi: brcmfmac: use strreplace() in brcmf_of_probe() wifi: plfxlc: Use eth_zero_addr() to assign zero address wifi: wilc1000: use existing iftype variable to store the interface type wifi: wilc1000: add 'isinit' flag for SDIO bus similar to SPI wifi: wilc1000: cancel the connect operation during interface down wifi: wilc1000: get correct length of string WID from received config packet wifi: wilc1000: set station_info flag only when signal value is valid ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-29Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski27-120/+763
Andrii Nakryiko says: ==================== bpf-next 2022-07-29 We've added 22 non-merge commits during the last 4 day(s) which contain a total of 27 files changed, 763 insertions(+), 120 deletions(-). The main changes are: 1) Fixes to allow setting any source IP with bpf_skb_set_tunnel_key() helper, from Paul Chaignon. 2) Fix for bpf_xdp_pointer() helper when doing sanity checking, from Joanne Koong. 3) Fix for XDP frame length calculation, from Lorenzo Bianconi. 4) Libbpf BPF_KSYSCALL docs improvements and fixes to selftests to accommodate s390x quirks with socketcall(), from Ilya Leoshkevich. 5) Allow/denylist and CI configs additions to selftests/bpf to improve BPF CI, from Daniel Müller. 6) BPF trampoline + ftrace follow up fixes, from Song Liu and Xu Kuohai. 7) Fix allocation warnings in netdevsim, from Jakub Kicinski. 8) bpf_obj_get_opts() libbpf API allowing to provide file flags, from Joe Burton. 9) vsnprintf usage fix in bpf_snprintf_btf(), from Fedor Tokarev. 10) Various small fixes and clean ups, from Daniel Müller, Rongguang Wei, Jörn-Thorben Hinz, Yang Li. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (22 commits) bpf: Remove unneeded semicolon libbpf: Add bpf_obj_get_opts() netdevsim: Avoid allocation warnings triggered from user space bpf: Fix NULL pointer dereference when registering bpf trampoline bpf: Fix test_progs -j error with fentry/fexit tests selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeout bpftool: Don't try to return value from void function in skeleton bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macro bpf: btf: Fix vsnprintf return value check libbpf: Support PPC in arch_specific_syscall_pfx selftests/bpf: Adjust vmtest.sh to use local kernel configuration selftests/bpf: Copy over libbpf configs selftests/bpf: Sort configuration selftests/bpf: Attach to socketcall() in test_probe_user libbpf: Extend BPF_KSYSCALL documentation bpf, devmap: Compute proper xdp_frame len redirecting frames bpf: Fix bpf_xdp_pointer return pointer selftests/bpf: Don't assign outer source IP to host bpf: Set flow flag to allow any source IP in bpf_tunnel_key geneve: Use ip_tunnel_key flow flags in route lookups ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-30random: correct spelling of "overwrites"Jason A. Donenfeld1-1/+1
It was missing an 'r'. Fixes: 186873c549df ("random: use simpler fast key erasure flow on per-cpu keys") Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-07-29Merge tag 'block-5.19-2022-07-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+2
Pull block fix from Jens Axboe: "Just a single fix for NVMe, yet another quirk addition" * tag 'block-5.19-2022-07-29' of git://git.kernel.dk/linux-block: nvme-pci: Crucial P2 has bogus namespace ids
2022-07-29bpf: Remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: /kernel/bpf/trampoline.c:101:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29libbpf: Add bpf_obj_get_opts()Joe Burton3-0/+21
Add an extensible variant of bpf_obj_get() capable of setting the `file_flags` parameter. This parameter is needed to enable unprivileged access to BPF maps. Without a method like this, users must manually make the syscall. Signed-off-by: Joe Burton <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29netdevsim: Avoid allocation warnings triggered from user spaceJakub Kicinski1-3/+5
We need to suppress warnings from sily map sizes. Also switch from GFP_USER to GFP_KERNEL_ACCOUNT, I'm pretty sure I misunderstood the flags when writing this code. Fixes: 395cacb5f1a0 ("netdevsim: bpf: support fake map offload") Reported-by: [email protected] Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29bpf: Fix NULL pointer dereference when registering bpf trampolineXu Kuohai1-1/+4
A panic was reported on arm64: [ 44.517109] audit: type=1334 audit(1658859870.268:59): prog-id=19 op=LOAD [ 44.622031] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 44.624321] Mem abort info: [ 44.625049] ESR = 0x0000000096000004 [ 44.625935] EC = 0x25: DABT (current EL), IL = 32 bits [ 44.627182] SET = 0, FnV = 0 [ 44.627930] EA = 0, S1PTW = 0 [ 44.628684] FSC = 0x04: level 0 translation fault [ 44.629788] Data abort info: [ 44.630474] ISV = 0, ISS = 0x00000004 [ 44.631362] CM = 0, WnR = 0 [ 44.632041] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000100ab5000 [ 44.633494] [0000000000000010] pgd=0000000000000000, p4d=0000000000000000 [ 44.635202] Internal error: Oops: 96000004 [#1] SMP [ 44.636452] Modules linked in: xfs crct10dif_ce ghash_ce virtio_blk virtio_console virtio_mmio qemu_fw_cfg [ 44.638713] CPU: 2 PID: 1 Comm: systemd Not tainted 5.19.0-rc7 #1 [ 44.640164] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 44.641799] pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 44.643404] pc : ftrace_set_filter_ip+0x24/0xa0 [ 44.644659] lr : bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.646118] sp : ffff80000803b9f0 [ 44.646950] x29: ffff80000803b9f0 x28: ffff0b5d80364400 x27: ffff80000803bb48 [ 44.648721] x26: ffff8000085ad000 x25: ffff0b5d809d2400 x24: 0000000000000000 [ 44.650493] x23: 00000000ffffffed x22: ffff0b5dd7ea0900 x21: 0000000000000000 [ 44.652279] x20: 0000000000000000 x19: 0000000000000000 x18: ffffffffffffffff [ 44.654067] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 44.655787] x14: ffff0b5d809d2498 x13: ffff0b5d809d2432 x12: 0000000005f5e100 [ 44.657535] x11: abcc77118461cefd x10: 000000000000005f x9 : ffffa7219cb5b190 [ 44.659254] x8 : ffffa7219c8e0000 x7 : 0000000000000000 x6 : ffffa7219db075e0 [ 44.661066] x5 : ffffa7219d3130e0 x4 : ffffa7219cab9da0 x3 : 0000000000000000 [ 44.662837] x2 : 0000000000000000 x1 : ffffa7219cb7a5c0 x0 : 0000000000000000 [ 44.664675] Call trace: [ 44.665274] ftrace_set_filter_ip+0x24/0xa0 [ 44.666327] bpf_trampoline_update.constprop.0+0x428/0x4a0 [ 44.667696] __bpf_trampoline_link_prog+0xcc/0x1c0 [ 44.668834] bpf_trampoline_link_prog+0x40/0x64 [ 44.669919] bpf_tracing_prog_attach+0x120/0x490 [ 44.671011] link_create+0xe0/0x2b0 [ 44.671869] __sys_bpf+0x484/0xd30 [ 44.672706] __arm64_sys_bpf+0x30/0x40 [ 44.673678] invoke_syscall+0x78/0x100 [ 44.674623] el0_svc_common.constprop.0+0x4c/0xf4 [ 44.675783] do_el0_svc+0x38/0x4c [ 44.676624] el0_svc+0x34/0x100 [ 44.677429] el0t_64_sync_handler+0x11c/0x150 [ 44.678532] el0t_64_sync+0x190/0x194 [ 44.679439] Code: 2a0203f4 f90013f5 2a0303f5 f9001fe1 (f9400800) [ 44.680959] ---[ end trace 0000000000000000 ]--- [ 44.682111] Kernel panic - not syncing: Oops: Fatal exception [ 44.683488] SMP: stopping secondary CPUs [ 44.684551] Kernel Offset: 0x2721948e0000 from 0xffff800008000000 [ 44.686095] PHYS_OFFSET: 0xfffff4a380000000 [ 44.687144] CPU features: 0x010,00022811,19001080 [ 44.688308] Memory Limit: none [ 44.689082] ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- It's caused by a NULL tr->fops passed to ftrace_set_filter_ip(). tr->fops is initialized to NULL and is assigned to an allocated memory address if CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS is enabled. Since there is no direct call on arm64 yet, the config can't be enabled. To fix it, call ftrace_set_filter_ip() only if tr->fops is not NULL. Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by: Bruno Goncalves <[email protected]> Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Tested-by: Bruno Goncalves <[email protected]> Acked-by: Song Liu <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29bpf: Fix test_progs -j error with fentry/fexit testsSong Liu1-1/+1
When multiple threads are attaching/detaching fentry/fexit programs to the same trampoline, we may call register_fentry on the same trampoline twice: register_fentry(), unregister_fentry(), then register_fentry again. This causes ftrace_set_filter_ip() for the same ip on tr->fops twice, which leaves duplicated ip in tr->fops. The extra ip is not cleaned up properly on unregister and thus causes failures with further register in register_ftrace_direct_multi(): register_ftrace_direct_multi() { ... for (i = 0; i < size; i++) { hlist_for_each_entry(entry, &hash->buckets[i], hlist) { if (ftrace_find_rec_direct(entry->ip)) goto out_unlock; } } ... } This can be triggered with parallel fentry/fexit tests with test_progs: ./test_progs -t fentry,fexit -j Fix this by resetting tr->fops in ftrace_set_filter_ip(), so that there will never be duplicated entries in tr->fops. Fixes: 00963a2e75a8 ("bpf: Support bpf_trampoline on functions with IPMODIFY (e.g. livepatch)") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29Merge tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-2/+6
Pull more drm fixes from Dave Airlie: "Maxime had the dog^Wmailing list server eat his homework^Wmisc pull request. Two more small fixes, one in nouveau svm code and the other in simpledrm. nouveau: - page migration fix simpledrm: - fix mode_valid return value" * tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm: nouveau/svm: Fix to migrate all requested pages drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()
2022-07-30Merge tag 'drm-misc-fixes-2022-07-29' of ↵Dave Airlie2-2/+6
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes One fix to fix simpledrm mode_valid return value, and one for page migration in nouveau Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20220729094514.sfzhc3gqjgwgal62@penduick
2022-07-29Merge tag 'scsi-fixes' of ↵Linus Torvalds4-21/+55
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four fixes, three in drivers. The two biggest fixes are ufs and the remaining driver and core fix are small and obvious (and the core fix is low risk)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix a race condition related to device management scsi: core: Fix warning in scsi_alloc_sgtables() scsi: ufs: host: Hold reference returned by of_parse_phandle() scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown
2022-07-29drm/amd/display: Fix a compilation failure on PowerPC caused by FPU codeRodrigo Siqueira4-14/+0
We got a report from Stephen/Michael that the PowerPC build was failing with the following error: ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o This error happened because of the function optc3_set_vrr_m_const. This function expects a double as a parameter in a code that is not allowed to have FPU operations. After further investigation, it became clear that optc3_set_vrr_m_const was never invoked, so we can safely drop this function and fix the ld issue. Cc: Alex Deucher <[email protected]> Cc: Melissa Wen <[email protected]> Reported-by: Stephen Rothwell <[email protected]> Reported-by: Michael Ellerman <[email protected]> Tested-by: Michael Ellerman <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29drm/amdgpu: enable support for psp 13.0.4 blockXiaojian Du4-2/+19
This patch will enable support for psp 13.0.4 blcok. Signed-off-by: Xiaojian Du <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29drm/amdgpu: add files for PSP 13.0.4Xiaojian Du2-0/+417
This patch will add files for PSP 13.0.4. Signed-off-by: Xiaojian Du <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29drm/amdgpu: add header files for MP 13.0.4Xiaojian Du2-0/+997
This patch will add header files for MP 13.0.4. Signed-off-by: Xiaojian Du <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and indexYifan Zhang1-1/+9
This patch corrects RLC_RLCS_BOOTLOAD_STATUS offset and index for GC 11.0.1. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29Add SPI Driver to HPE GXP ArchitectureMark Brown5-0/+391
Merge series from [email protected] <[email protected]>: The GXP supports 3 separate SPI interfaces to accommodate the system flash, core flash, and other functions. The SPI engine supports variable clock frequency, selectable 3-byte or 4-byte addressing and a configurable x1, x2, and x4 command/address/data modes. The memory buffer for reading and writing ranges between 256 bytes and 8KB. This driver supports access to the core flash and bios part.
2022-07-29drm/amdgpu: send msg to IMU for the front-door loadingXiaojian Du1-0/+9
This patch will make SMU send msg to IMU for the front-door loading, it is required by some ASICs. Signed-off-by: Yifan Zhang <[email protected]> Signed-off-by: Xiaojian Du <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"Yu Zhe1-2/+2
time_is_before_jiffies deals with timer wrapping correctly. Signed-off-by: Yu Zhe <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-07-29docs/kernel-parameters: Update descriptions for "mitigations=" param with ↵Eiichi Tsukata1-0/+2
retbleed Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt" with the respective retbleed= settings. Signed-off-by: Eiichi Tsukata <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2022-07-29mm/hmm: fault non-owner device private entriesRalph Campbell1-11/+8
If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a device private PTE is found, the hmm_range::dev_private_owner page is used to determine if the device private page should not be faulted in. However, if the device private page is not owned by the caller, hmm_range_fault() returns an error instead of calling migrate_to_ram() to fault in the page. For example, if a page is migrated to GPU private memory and a RDMA fault capable NIC tries to read the migrated page, without this patch it will get an error. With this patch, the page will be migrated back to system memory and the NIC will be able to read the data. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 08ddddda667b ("mm/hmm: check the device private page owner in hmm_range_fault()") Signed-off-by: Ralph Campbell <[email protected]> Reported-by: Felix Kuehling <[email protected]> Reviewed-by: Alistair Popple <[email protected]> Cc: Philip Yang <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-07-29page_alloc: fix invalid watermark check on a negative valueJaewon Kim1-4/+8
There was a report that a task is waiting at the throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was increasing. This is a bug where zone_watermark_fast returns true even when the free is very low. The commit f27ce0e14088 ("page_alloc: consider highatomic reserve in watermark fast") changed the watermark fast to consider highatomic reserve. But it did not handle a negative value case which can be happened when reserved_highatomic pageblock is bigger than the actual free. If watermark is considered as ok for the negative value, allocating contexts for order-0 will consume all free pages without direct reclaim, and finally free page may become depleted except highatomic free. Then allocating contexts may fall into throttle_direct_reclaim. This symptom may easily happen in a system where wmark min is low and other reclaimers like kswapd does not make free pages quickly. Handle the negative case by using MIN. Link: https://lkml.kernel.org/r/[email protected] Fixes: f27ce0e14088 ("page_alloc: consider highatomic reserve in watermark fast") Signed-off-by: Jaewon Kim <[email protected]> Reported-by: GyeongHwan Hong <[email protected]> Acked-by: Mel Gorman <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Baoquan He <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Yong-Taek Lee <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2022-07-29Merge branches 'acpi-video', 'acpi-pci' and 'acpi-docs'Rafael J. Wysocki5-30/+56
Merge ACPI backlight driver changes, ACPI changes related to PCI and ACPI documentation changes for v5.20-rc1: - Use native backlight on Dell Inspiron N4010 (Hans de Goede). - Use native backlight on some TongFang devices (Werner Sembach). - Drop X86 dependency from the ACPI backlight driver Kconfig (Riwen Lu). - Shorten the quirk list in the ACPI backlight driver by identifying Clevo by board_name only (Werner Sembach). - Remove useless NULL pointer checks from 2 ACPI PCI link management functions (Andrey Strachuk). - Fix obsolete example in the ACPI EINJ documentation (Qifu Zhang). - Update links and references to _DSD-related documents (Sudeep Holla). * acpi-video: ACPI: video: Use native backlight on Dell Inspiron N4010 ACPI: video: Shortening quirk list by identifying Clevo by board_name only ACPI: video: Force backlight native for some TongFang devices ACPI: video: Drop X86 dependency from Kconfig * acpi-pci: ACPI/PCI: Remove useless NULL pointer checks * acpi-docs: Documentation: ACPI: EINJ: Fix obsolete example Documentation: ACPI: Update links and references to DSD related docs
2022-07-29Merge tag 'perf-tools-fixes-for-v5.19-2022-07-29' of ↵Linus Torvalds4-31/+78
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix addresses for bss symbols, describing variables used in resolving data access in tools such as 'perf c2c' and 'perf mem'. - Skip symbols if SHF_ALLOC flag is not set, a technique used for listing deprecated symbols, its addresses are zeros, so not useful. - Remove undefined behavior from bpf_perf_object__next() when dealing with an empty bpf_objects_list list. - Make a ARM CoreSight disasm script work with both python2 and python3. - Sync x86's cpufeatures header with with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Remove undefined behavior from bpf_perf_object__next() perf symbol: Skip symbols if SHF_ALLOC flag is not set perf symbol: Correct address for bss symbols perf scripts python: Let script to be python2 compliant tools headers cpufeatures: Sync with the kernel sources
2022-07-29Merge tag 'wq-for-5.19-rc8-fixes' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "Just one commit to suppress a spurious warning added during the 5.19 cycle" * tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Avoid a false warning in unbind_workers()
2022-07-29Merge branches 'acpi-pm', 'acpi-soc', 'acpi-tables' and 'acpi-resource'Rafael J. Wysocki8-19/+57
Merge ACPI power management changes, ACPI LPSS driver changes, ACPI table parsing code changes and ACPI resource handling changes for v5.20-rc1: - Save NVS memory during transitions into S3 on Lenovo G40-45 (Manyi Li). - Add support for upcoming AMD uPEP device ID AMDI008 to the ACPI suspend-to-idle driver for x86 platforms (Shyam Sundar S K). - Clean up checks related to the ACPI_FADT_LOW_POWER_S0 platform flag in the LPIT table driver and the suspend-to-idle driver for x86 platforms (Rafael Wysocki). - Print information messages regarding declared LPS0 idle support in the platform firmware (Rafael Wysocki). - Fix missing check in register_device_clock() in the ACPI driver for Intel SoCs (huhai). - Fix ACS setup in the VIOT table parser (Eric Auger). - Skip IRQ override on AMD Zen platforms where it's harmful (Chuanhong Guo). * acpi-pm: ACPI: PM: x86: Print messages regarding LPS0 idle support ACPI: PM: s2idle: Use LPS0 idle if ACPI_FADT_LOW_POWER_S0 is unset Revert "ACPI / PM: LPIT: Register sysfs attributes based on FADT" ACPI: PM: s2idle: Add support for upcoming AMD uPEP HID AMDI008 ACPI: PM: save NVS memory for Lenovo G40-45 * acpi-soc: ACPI: LPSS: Fix missing check in register_device_clock() * acpi-tables: ACPI: VIOT: Fix ACS setup * acpi-resource: ACPI: resource: skip IRQ override on AMD Zen platforms
2022-07-29selftests/bpf: Bump internal send_signal/send_signal_tracepoint timeoutDaniel Müller2-6/+3
The send_signal/send_signal_tracepoint is pretty flaky, with at least one failure in every ten runs on a few attempts I've tried it: > test_send_signal_common:PASS:pipe_c2p 0 nsec > test_send_signal_common:PASS:pipe_p2c 0 nsec > test_send_signal_common:PASS:fork 0 nsec > test_send_signal_common:PASS:skel_open_and_load 0 nsec > test_send_signal_common:PASS:skel_attach 0 nsec > test_send_signal_common:PASS:pipe_read 0 nsec > test_send_signal_common:PASS:pipe_write 0 nsec > test_send_signal_common:PASS:reading pipe 0 nsec > test_send_signal_common:PASS:reading pipe error: size 0 0 nsec > test_send_signal_common:FAIL:incorrect result unexpected incorrect result: actual 48 != expected 50 > test_send_signal_common:PASS:pipe_write 0 nsec > #139/1 send_signal/send_signal_tracepoint:FAIL The reason does not appear to be a correctness issue in the strict sense. Rather, we merely do not receive the signal we are waiting for within the provided timeout. Let's bump the timeout by a factor of ten. With that change I have not been able to reproduce the failure in 150+ iterations. I am also sneaking in a small simplification to the test_progs test selection logic. Signed-off-by: Daniel Müller <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29Merge branches 'acpi-processor', 'acpi-apei' and 'acpi-ec'Rafael J. Wysocki10-175/+148
Merge ACPI processor driver changes, APEI changes and ACPI EC driver changes for v5.20-rc1: - Drop leftover acpi_processor_get_limit_info() declaration (Riwen Lu). - Split out thermal initialization from ACPI PSS (Riwen Lu). - Annotate more functions in the ACPI CPU idle driver to live in the cpuidle section (Guilherme G. Piccoli). - Fix _EINJ vs "special purpose" EFI memory regions (Dan Williams). - Implement a better fix to avoid spamming the console with old error logs (Tony Luck). - Fix typo in a comment in the APEI code (Xiang wangx). - Clean up the ACPI EC driver after previous changes in it (Hans de Goede). * acpi-processor: ACPI: processor: Drop leftover acpi_processor_get_limit_info() declaration ACPI: processor: Split out thermal initialization from ACPI PSS ACPI: processor/idle: Annotate more functions to live in cpuidle section * acpi-apei: ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP ACPI: APEI: Better fix to avoid spamming the console with old error logs ACPI: APEI: Fix double word in a comment * acpi-ec: ACPI: EC: Drop unused ident initializers from dmi_system_id tables ACPI: EC: Re-use boot_ec when possible even when EC_FLAGS_TRUST_DSDT_GPE is set ACPI: EC: Drop the EC_FLAGS_IGNORE_DSDT_GPE quirk ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
2022-07-29Merge branch 'acpi-bus'Rafael J. Wysocki17-393/+462
Merge ACPI device object management changes for v5.20-rc1. - Use the facilities provided by the driver core and some additional helpers to handle the children of a given ACPI device object in multiple places instead of using the children and node list heads in struct acpi_device which is error prone (Rafael Wysocki). - Fix ACPI-related device reference counting issue in the hisi_lpc bus driver (Yang Yingliang). - Drop the children and node list heads that are not needed any more from struct acpi_device (Rafael Wysocki). - Drop driver member from struct acpi_device (Uwe Kleine-König). - Drop redundant check from acpi_device_remove() (Uwe Kleine-König). * acpi-bus: ACPI: bus: Drop unused list heads from struct acpi_device hisi_lpc: Use acpi_dev_for_each_child() bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe() ACPI: bus: Drop driver member of struct acpi_device ACPI: bus: Drop redundant check in acpi_device_remove() mfd: core: Use acpi_dev_for_each_child() ACPI / MMC: PM: Unify fixing up device power soundwire: Use acpi_dev_for_each_child() platform/x86/thinkpad_acpi: Use acpi_dev_for_each_child() ACPI: scan: Walk ACPI device's children using driver core ACPI: bus: Introduce acpi_dev_for_each_child_reverse() ACPI: video: Use acpi_dev_for_each_child() ACPI: bus: Export acpi_dev_for_each_child() to modules ACPI: property: Use acpi_dev_for_each_child() for child lookup ACPI: container: Use acpi_dev_for_each_child() USB: ACPI: Replace usb_acpi_find_port() with acpi_find_child_by_adr() thunderbolt: ACPI: Replace tb_acpi_find_port() with acpi_find_child_by_adr() ACPI: glue: Introduce acpi_find_child_by_adr() ACPI: glue: Introduce acpi_dev_has_children() ACPI: glue: Use acpi_dev_for_each_child()
2022-07-29Merge tag 'pm-5.19-rc9' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Make some false positive RCU splats resulting from a recent intel_idle driver change go away (Waiman Long)" * tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Fix false positive RCU splats due to incorrect hardirqs state
2022-07-29workqueue: Avoid a false warning in unbind_workers()Lai Jiangshan1-1/+4
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible fails and trigger the false warning. Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs. It is very easy to trigger the warning: Set wq_unbound_cpumask to a small set of CPUs. Offline all the CPUs of wq_unbound_cpumask. Offline an extra CPU and trigger the warning. Fixes: 10a5a651e3af ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs") Signed-off-by: Lai Jiangshan <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-07-29Merge tag 'riscv-for-linus-5.19-rc9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fix from Palmer Dabbelt: "A build fix for 'make vdso_install' that avoids an issue trying to install the compat VDSO" * tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: compat: vdso: Fix vdso_install target
2022-07-29Merge branches 'pm-devfreq', 'pm-qos', 'pm-tools' and 'pm-docs'Rafael J. Wysocki16-680/+1255
Merge devfreq changes, PM QoS change, and power management tools and documentation changes for v5.20-rc1: - Add new devfreq driver for Mediatek CCI (Cache Coherent Interconnect) (Johnson Wang). - Convert the Samsung Exynos SoC Bus bindings to DT schema of exynos-bus.c (Krzysztof Kozlowski). - Address kernel-doc warnings by adding the description for unused fucntion parameters in devfreq core (Mauro Carvalho Chehab). - Use NULL to pass a null pointer rather than zero according to the function propotype in imx-bus.c (Colin Ian King). - Print error message instead of error interger value in tegra30-devfreq.c (Dmitry Osipenko). - Add checks to prevent setting negative frequency QoS limits for CPUs (Shivnandan Kumar). - Update the pm-graph suite of utilities to the latest revision 5.9 including multiple improvements (Todd Brandt). - Drop pme_interrupt reference from the PCI power management documentation (Mario Limonciello). * pm-devfreq: PM / devfreq: tegra30: Add error message for devm_devfreq_add_device() PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero PM / devfreq: shut up kernel-doc warnings dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver dt-bindings: interconnect: Add MediaTek CCI dt-bindings * pm-qos: PM: QoS: Add check to make sure CPU freq is non-negative * pm-tools: pm-graph v5.9 * pm-docs: Documentation: PM: Drop pme_interrupt reference
2022-07-29bpftool: Don't try to return value from void function in skeletonJörn-Thorben Hinz1-1/+1
A skeleton generated by bpftool previously contained a return followed by an expression in OBJ_NAME__detach(), which has return type void. This did not hurt, the bpf_object__detach_skeleton() called there returns void itself anyway, but led to a warning when compiling with e.g. -pedantic. Signed-off-by: Jörn-Thorben Hinz <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29bpftool: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE macroRongguang Wei1-1/+1
Use the ARRAY_SIZE macro and make the code more compact. Signed-off-by: Rongguang Wei <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-07-29Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'Rafael J. Wysocki18-99/+179
Merge core device power management changes for v5.20-rc1: - Extend support for wakeirq to callback wrappers used during system suspend and resume (Ulf Hansson). - Defer waiting for device probe before loading a hibernation image till the first actual device access to avoid possible deadlocks reported by syzbot (Tetsuo Handa). - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn Helgaas). - Add Raptor Lake-P to the list of processors supported by the Intel RAPL driver (George D Sworo). - Add Alder Lake-N and Raptor Lake-P to the list of processors for which Power Limit4 is supported in the Intel RAPL driver (Sumeet Pawnikar). - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before attempting to remove it (Hsin-Yi Wang). - Change the Energy Model code to represent power in micro-Watts and adjust its users accordingly (Lukasz Luba). * pm-core: PM: runtime: Extend support for wakeirq for force_suspend|resume * pm-sleep: PM: hibernate: defer device probing when resuming from hibernation PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP * powercap: powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P powercap: intel_rapl: Add support for RAPTORLAKE_P * pm-domains: PM: domains: Ensure genpd_debugfs_dir exists before remove * pm-em: cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1 firmware: arm_scmi: Get detailed power scale from perf Documentation: EM: Switch to micro-Watts scale PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-29Merge branches 'pm-cpufreq' and 'pm-cpuidle'Rafael J. Wysocki571-3289/+6882
Merge processor power management changes for v5.20-rc1: - Make cpufreq_show_cpus() more straightforward (Viresh Kumar). - Drop unnecessary CPU hotplug locking from store() used by cpufreq sysfs attributes (Viresh Kumar). - Make the ACPI cpufreq driver support the boost control interface on Zhaoxin/Centaur processors (Tony W Wang-oc). - Print a warning message on attempts to free an active cpufreq policy which should never happen (Viresh Kumar). - Fix grammar in the Kconfig help text for the loongson2 cpufreq driver (Randy Dunlap). - Use cpumask_var_t for an on-stack CPU mask in the ondemand cpufreq governor (Zhao Liu). - Add trace points for guest_halt_poll_ns grow/shrink to the haltpoll cpuidle driver (Eiichi Tsukata). - Modify intel_idle to treat C1 and C1E as independent idle states on Sapphire Rapids (Artem Bityutskiy). * pm-cpufreq: cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask cpufreq: loongson2: fix Kconfig "its" grammar cpufreq: Warn users while freeing active policy cpufreq: ACPI: Add Zhaoxin/Centaur turbo boost control interface support cpufreq: Drop unnecessary cpus locking from store() cpufreq: Optimize cpufreq_show_cpus() * pm-cpuidle: intel_idle: make SPR C1 and C1E be independent cpuidle: haltpoll: Add trace points for guest_halt_poll_ns grow/shrink
Powered by cgit, Gruvboxed by Blaster4385.