aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-07-03drivers/rtc/rtc-sirfsoc.c: add rtc drivers for CSR SiRFprimaII and SiRFatlasVIXianglong Du5-2/+485
On CSR SiRFprimaII/atlasVI, there is a programmable 16-bit divider (RTC_DIV) that divides the input 32.768KHz clock to the frequency that users need (E.g. 1 Hz). The divided real-time clock will be used to drive a 32-bit counter (RTC_COUNTER) that provides users with the actual time. In each cycle of the divided real-time clock, there is a Hertz interrupt generated to the RISC. Users can also configure an alarm (RTC_ALARM). When RTC_COUNTER matches the alarm, there will be an alarm interrupt generated to the RISC. The system RTC can generate an alarm wake-up signal to notify the power controller to wake up from power saving mode. Signed-off-by: Xianglong Du <[email protected]> Signed-off-by: Barry Song <[email protected]> Cc: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ds1216.c: use module_platform_driver_probe()Fabio Porcedda1-12/+1
Use module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Fabio Porcedda <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03rtc: omap: restore back (hard-code) wakeup supportHebbar Gururaja1-0/+2
rtc-omap driver modules is used both by OMAP1/2, Davinci SoC platforms. However, rtc wake support on OMAP1 is broken. Hence the device_init_wakeup() was removed from rtc-omap driver and moved to platform board files that supported it (DA850/OMAP-L138). [1] However, recently [2] it was suggested that driver should always do a device_init_wakeup(dev, true). Platforms that don't want/need wakeup support can disable it from userspace via: echo disabled > /sys/devices/.../power/wakeup Also, with the new DT boot-up, board file doesn't exist and hence there is no way to have device wakeup support rtc. The fix for above issues, is to hard code device_init_wakeup() inside driver and let platforms that don't need this, handle it through the sysfs power entry. [1] https://patchwork.kernel.org/patch/136731/ [2] http://www.mail-archive.com/davinci-linux-open-source@linux. davincidsp.com/msg26077.html Signed-off-by: Hebbar Gururaja <[email protected]> Cc: Alessandro Zummo <[email protected]> Acked-by: Kevin Hilman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03rtc: add NXP PCF2127 support (i2c)Renaud Cerrato3-0/+251
Added support for NXP PCF2127 RTC (i2c). [[email protected]: fix typo, fix warnings] Signed-off-by: Renaud Cerrato <[email protected]> Cc: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-palmas.c: init wakeup before device registerWei Ni1-1/+1
Enable dev as wakeup device before calling rtc_device_register(), so that it can create the "wakealarm" sysfs. Signed-off-by: Wei Ni <[email protected]> Acked-by: Laxman Dewangan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/class: convert from Legacy pm ops to dev_pm_opsShuah Khan1-6/+6
Convert drivers/rtc/class to use dev_pm_ops for power management and remove Legacy PM ops hooks. With this change, rtc class registers suspend/resume callbacks via class->pm (dev_pm_ops) instead of Legacy class->suspend/resume. When __device_suspend() runs call-backs, it will find class->pm ops for the rtc class. Signed-off-by: Shuah Khan <[email protected]> Signed-off-by: Jingoo Han <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf2123.c: replace strict_strtoul() with kstrtoul()Jingoo Han1-5/+10
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/interface.c: return -EBUSY, not -EACCES when device is busyChris Brand1-4/+4
If rtc->irq_task is non-NULL and task is NULL, they always rtc_irq_set_freq(), whenever err is set to -EBUSY it will then immediately be set to -EACCES, misleading the caller as to the underlying problem. Signed-off-by: Chris Brand <[email protected]> Acked-by: Alessandro Zummo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-twl.c: cleanup with module_platform_driver() conversionPeter Ujfalusi1-11/+1
Use module_platform_driver() to register the platform driver. Signed-off-by: Peter Ujfalusi <[email protected]> Acked-by: Kevin Hilman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-twl.c: fix rtc_reg_map initializationPeter Ujfalusi1-5/+6
Initialize the rtc_reg_map in platform_driver's probe function instead at module_init time. This way we can make sure that the twl-core has been already probed and initialized (twl_priv->twl_id is valid) since the platform device for the RTC driver will be created by the twl-core after it finished its init. Reported-by: Christoph Fritz <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Tested-by: Kevin Hilman <[email protected]> Tested-by: Grygorii Strashko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-cmos.c: work around bios clearing rtc controlDerek Basehore1-13/+22
The bios may clear the rtc control register when resuming the system. Since the cmos interrupt handler may now be run before the rtc_cmos is resumed, this can cause the interrupt handler to ignore an alarm since the alarm bit is not set in the rtc control register. To work around this, check if the rtc_cmos is suspended and use the stored value for the rtc control register. Signed-off-by: Derek Basehore <[email protected]> Reviewed-by: Sameer Nanda <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Jingoo Han <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: John Stultz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-twl.c: ensure IRQ is wakeup enabledKevin Hilman1-2/+14
Currently, the RTC IRQ is never wakeup-enabled so is not capable of bringing the system out of suspend. On OMAP platforms, we have gotten by without this because the TWL RTC is on an I2C-connected chip which is capable of waking up the OMAP via the IO ring when the OMAP is in low-power states. However, if the OMAP suspends without hitting the low-power states (and the IO ring is not enabled), RTC wakeups will not work because the IRQ is not wakeup enabled. To fix, ensure the RTC IRQ is wakeup enabled whenever the RTC alarm is set. Signed-off-by: Kevin Hilman <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: Grygorii Strashko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf8583.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf8563.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-m48t35.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-isl12022.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <[email protected]> Cc: Roman Fietze <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-da9052.c: use PTR_RET()Sachin Kamat1-4/+2
Use of PTR_RET() simplifies the code. Signed-off-by: Sachin Kamat <[email protected]> Cc: David Dajun Chen <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-mpc5121.c: use platform_{get,set}_drvdata()Jingoo Han1-2/+2
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <[email protected]> Cc: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ds1302.c: handle write protectionSergey Yanovich1-0/+7
This chip has a control register and can prevent altering saved clock. Without this patch we could have: (arm)root@pac14:~# date Tue May 21 03:08:27 MSK 2013 (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:13:58 2013 -0.067322 seconds (arm)root@pac14:~# /etc/init.d/hwclock.sh stop [info] Saving the system clock. [info] Hardware Clock updated to Tue May 21 03:09:01 MSK 2013. (arm)root@pac14:~# /etc/init.d/hwclock.sh show Tue May 21 11:14:15 2013 -0.624272 seconds The patch enables write access to rtc before the driver tries to write time and re-disables when time data is written. Signed-off-by: Sergey Yanovich <[email protected]> Acked-by: Marc Zyngier <[email protected]> Cc: Alessandro Zummo <[email protected]> Cc: Sachin Kamat <[email protected]> Cc: Jingoo Han <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ab8500.c: add second resolution to rtc driverAlexandre Torgue1-1/+62
Android expects the RTC to have second resolution. On ab8540 cut2 RTC block has a new register which allows setting seconds for wakeup alarms. Existing registers (minutes hi, mid and low) have seen their offsets changed. Here is the new mapping: * AlarmSec (A) 0x22 * AlarmMinLow (M) from 0x8 to 0x23 * AlarmMinMid (M) from 0x9 to 0x24 * AlarmMinHigh (M) from 0xA to 0x25 Signed-off-by: Julien Delacou <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]> Acked-by: Lee Jones <[email protected]> Acked-by: Linus Walleij <[email protected]> Cc: Samuel Ortiz <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-wm831x.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-tps80031.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Laxman Dewangan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-sun4v.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-starfire.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-snvs.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-rx8581.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Martyn Welch <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-rs5c348.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Atsushi Nemoto <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-rx4581.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Torben Hohn <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-rv3029c2.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Gregory Hermant <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-rs5c313.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Nobuhiro Iwamatsu <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ps3.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Geoff Levand <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf8583.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf8563.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-pcf8523.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-max8997.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-max77686.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Chiwoong Byun <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-max8907.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-max6900.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Dale Farnsworth <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-max6902.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-m41t94.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Kim B. Heino <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-generic.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Kyle McMartin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-m48t35.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-m41t93.c: remove empty functionSachin Kamat1-7/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Nikolaus Voss <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-isl12022.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Roman Fietze <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-fm3130.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Sergey Lapin <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-em3027.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Mike Rapoport <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-efi.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: dann frazier <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ds1390.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Mark Jackson <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ds3234.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Cc: Dennis Aberilla <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-07-03drivers/rtc/rtc-ds1672.c: remove empty functionSachin Kamat1-6/+0
After the switch to devm_* functions and the removal of rtc_device_unregister(), the 'remove' function does not do anything. Delete it. Signed-off-by: Sachin Kamat <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.