aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29drm/amd/display: Update MALL SS NumWays calculationAlvin Lee2-110/+98
[Description] Update MALL SS NumWays calculation according to programming guide. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: skip phantom pipes when checking for pending flipAurabindo Pillai1-1/+1
[Why&How] Phantom pipes are not programmed fully to hardware and hence we should not expect a flip completion. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fill in clock values when DPM is not enabledSamson Tam4-0/+57
[Why] For individual feature testing, PMFW may not report all clock values back. Driver will default them to 0 but this will cause the BB table to be skipped and default to one state with max clocks. [How] Add helper function to scan through initial clock values and populate them with default clock limits so that BB table can be built. Add dpm_enabled flag to check when DPM is not enabled and to trigger helper function. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Cursor Info Update refactorMax Tseng2-0/+6
Dc: cursor info update: phase 1: [Why] Different feature might need to update cursor info, but With different approaches. To unify this diversity problem, all features should use The same interface to update cursor. Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Max Tseng <max.tseng@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Avoid unnecessary pixel rate divider programmingTaimur Hassan1-0/+53
[Why] Programming pixel rate divider when FIFO is enabled can cause FIFO error. [How] Skip divider programming when divider values are the same to prevent FIFO error. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Remove assert for odm transition caseEric Bernstein1-3/+7
Remove assert that will hit during odm transition case, since this is a valid case. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add ABM control to panel_config struct.Ian Chen1-0/+6
Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ian Chen <ian.chen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Disable MALL when TMZ surfaceAlvin Lee4-11/+19
[Description] - Don't use MALL buffering of any kind when the surface is TMZ - Workaround for a HW bug Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix typo in get_pixel_rate_divTaimur Hassan1-1/+1
[Why & How] Some FIFO errors still occur due to reading wrong pixel rate divider. Fix typo to prevent FIFO error. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: add debug keys for override bios settings.Charlene Liu2-3/+21
[why] adding debug keys used for compliance test. Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Fix audio on display after unplugging anotherAric Cyr1-4/+2
Revert "dc: skip audio setup when audio stream is enabled" This reverts commit 65fbfb02c2734cacffec5e3f492e1b4f1dabcf98 [why] We have minimal pipe split transition method to avoid pipe allocation outage.However, this method will invoke audio setup which cause audio output stuck once pipe reallocate. [how] skip audio setup for pipelines which audio stream has been enabled Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: add missing null checkWenjing Liu1-1/+1
[why] There is a coding error for a missing null check for stream pointer when iterating through pipe_ctx. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add explicit FIFO disable for DP blankNicholas Kazlauskas1-1/+11
[Why] We rely on DMCUB to do this when disabling the link but it should actually come before we disable the DP VID stream. If we don't then the FIFO can end up with underflow that persists the next time it's enabled. [How] Add a DCN314 specific blank sequence that will disable the DIG FIFO first. Reviewed-by: Syed Hassan <Syed.Hassan@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Wrap OTG disable workaround with FIFO controlNicholas Kazlauskas1-1/+10
[Why] The DIO FIFO will underflow if we turn off the OTG before we turn off the FIFO. Since this happens as part of the OTG workaround and we don't reset the FIFO afterwards we see the error persist. [How] Add disable FIFO before the disable CRTC and enable FIFO after enabling the CRTC. Reviewed-by: Syed Hassan <Syed.Hassan@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add debug option for exiting idle optimizations on cursor ↵Brandon Syu4-2/+6
updates [Description] - Have option to exit idle opt on cursor updates for debug and optimizations purposes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Brandon Syu<Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Change EDID fallback conditionIlya Bakoulin1-1/+1
[Why] Partially valid EDIDs on MST sinks are treated the same way as broken EDIDs or read failures and result in a fallback EDID being used instead. [How] If edid_status is EDID_PARTIAL_VALID, prefer to use the valid EDID blocks instead of using a fallback EDID. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Do DIO FIFO enable after DP video stream enableNicholas Kazlauskas1-5/+8
[Why] Avoids a race condition where DIO FIFO can underflow due to no incoming data available. [How] Shift the FIFO enable below stream enable. Make sure fullness level is written before the DIO reset takes place and that we're not doing it twice. Reviewed-by: Syed Hassan <Syed.Hassan@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Remove interface for periodic interrupt 1Aric Cyr5-50/+18
[why] Only a single VLINE interrupt is available so interface should not expose the second one which is used by DMU firmware. [how] Remove references to periodic_interrupt1 and VLINE1 from DC interfaces. Reviewed-by: Jaehyun Chung <jaehyun.chung@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Update DCN32 to use new SR latenciesAlvin Lee1-2/+2
[Description] Update to new SR latencies for DCN32 Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Avoid avoid unnecessary pixel rate divider programmingTaimur Hassan1-0/+47
[Why] Programming pixel rate divider when FIFO is enabled can cause FIFO error. [How] Skip divider programming when divider values are the same to prevent FIFO error. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdkfd: fix dropped interrupt in kfd_int_process_v11Graham Sider1-3/+3
Shader wave interrupts were getting dropped in event_interrupt_wq_v11 if the PRIV bit was set to 1. This would often lead to a hang. Until debugger logic is upstreamed, expand comment to stop early return. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: pass queue size and is_aql_queue to MESGraham Sider4-1/+10
Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also re-use gds_size for the queue size (unused for KFD). MES requires the queue size in order to compute the actual wptr offset within the queue RB since it increases monotonically for AQL queues. v2: Make is_aql_queue assign clearer Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdkfd: fix MQD init for GFX11 in init_mqdGraham Sider1-0/+4
Set remaining compute_static_thread_mgmt_se* accordingly. Signed-off-by: Graham Sider <Graham.Sider@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Enable SA software trap.David Belanger3-385/+413
Enables support for software trap for MES >= 4. Adapted from implementation from Jay Cornwall. v2: Add IP version check in conditions. v3: Remove debugger code changes. Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com> Signed-off-by: David Belanger <david.belanger@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/amdgpu: Add missing XGMI hive registers for mmhub 9.4.1Tom St Denis2-0/+12
These are used by umr to sort the hive nodes since the kernel initializes the nodes in order of bus enumeration not XGMI hive enumeration. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/vcn: update vcn4 fw shared data structureRuijing Dong2-1/+11
update VF_RB_SETUP_FLAG, add SMU_DPM_INTERFACE_FLAG, and corresponding change in VCN4. Reviewed-by: Leo Liu <leo.liu@amd.com> Signed-off-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma6: use common function to init sdma fwLikun Gao1-71/+2
Use common function to init sdma v6 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: support sdma struct v2 fw initLikun Gao1-16/+60
Support SDMA firmware init on common function for sdma v2 struct. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma5: use common function to init sdma fwLikun Gao2-107/+11
Use common function to init sdma v5 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/sdma4: use common function to init sdma fwLikun Gao1-88/+19
Use common function to init sdma v4 firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init SDMA microcodeLikun Gao2-0/+93
Add an common function to init SDMA related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: use common function to init cp fwLikun Gao1-139/+16
Use common function to init gfx v11 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: use common function to init CP fwLikun Gao1-78/+8
Use common function to init gfx v10 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx9: use common function to init cp fwLikun Gao1-88/+10
Use common function to init gfx v9 CP firmware ucode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: add function to init CP microcodeLikun Gao2-0/+142
Add an common function to init CP related microcode. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: use adverse selection for dpm features unsupported by driverEvan Quan1-61/+24
It's vbios and pmfw instead of driver who decide whether some dpm features is supported or not. Driver just de-selects those features which are not permitted on user's request. Thus, we use adverse selects model. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/pm: enable gfxoff feature for SMU 13.0.0Evan Quan1-3/+5
The feature is ready with latest 78.58.0 PMFW. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: avoid gfx register accessing during gfxoffEvan Quan1-0/+4
Make sure gfxoff is disabled before gfx register accessing. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drivers/amd/pm: check the return value of amdgpu_bo_kmapLi Zhong1-1/+4
amdgpu_bo_kmap() returns error when fails to map buffer object. Add the error check and propagate the error. Reviewed-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Li Zhong <floridsleeves@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Use simplified API for p2p dist calcLijo Lazar2-4/+4
Use the simpified API that calculates distance between two devices. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Disable verbose for p2p dist calcLijo Lazar2-2/+2
Disable verbose while getting p2p distance. With verbose, it shows warning if ACS redirect is set between the devices. Adds noise to dmesg logs when a few GPU devices are on the same platform. Example log: amdgpu 0000:34:00.0: ACS redirect is set between the client and provider (0000:31:00.0) amdgpu 0000:34:00.0: to disable ACS redirect for this path, add the kernel parameter: pci=disable_acs_redir=0000:30:00.0;0000:2e:00.0;0000:33:00.0;0000:2e:10.0 Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu: Fixed ras warning when uninstalling amdgpuYiPeng Chai1-1/+2
For the asic using smu v13_0_2, there is the following warning when uninstalling amdgpu: amdgpu: ras disable gfx failed poison:1 ret:-22. [Why]: For the asic using smu v13_0_2, the psp .suspend and mode1reset is called before amdgpu_ras_pre_fini during amdgpu uninstall, it has disabled all ras features and reset the psp. Since the psp is reset, calling amdgpu_ras_disable_all_features in amdgpu_ras_pre_fini to disable ras features will fail. [How]: If all ras features are disabled, amdgpu_ras_disable_all_features will not be called to disable all ras features again. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang1-152/+4
switch to common helper to initialize rlc firmware for gfx11 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amdgpu/gfx10: switch to amdgpu_gfx_rlc_init_microcodeHawking Zhang1-187/+9
switch to common helper to initialize rlc firmware for gfx10 v2: squash in size validation fix (Alex) Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-28drm/bridge: lt8912b: fix corrupted image outputFrancesco Dolcini1-1/+1
Correct I2C address for the register list in lt8912_write_lvds_config(), these registers are on the first I2C address (0x48), the current function is just writing garbage to the wrong registers and this creates multiple issues (artifacts and output completely corrupted) on some HDMI displays. Correct I2C address comes from Lontium documentation and it is the one used on other out-of-tree LT8912B drivers [1]. [1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296 Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch
2022-09-28drm/bridge: lt8912b: set hdmi or dvi modePhilippe Schenker1-0/+2
The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads from EDID what the display needs and sets it accordingly. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch
2022-09-28drm/bridge: lt8912b: add vsync hsyncPhilippe Schenker1-1/+8
Currently the bridge driver does not take care whether or not the display needs positive/negative vertical/horizontal syncs. Pass these two flags to the bridge from the EDID that was read out from the display. Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Adrien Grassein <adrien.grassein@gmail.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch
2022-09-28drm/dp: Don't rewrite link config when setting phy test patternKhaled Almahallawy1-9/+0
The sequence for Source DP PHY CTS automation is [2][1]: 1- Emulate successful Link Training(LT) 2- Short HPD and change link rates and number of lanes by LT. (This is same flow for Link Layer CTS) 3- Short HPD and change PHY test pattern and swing/pre-emphasis levels (This step should not trigger LT) The problem is with DP PHY compliance setup as follow: [DPTX + on board LTTPR]------Main Link--->[Scope] ^ | | | | | ----------Aux Ch------>[Aux Emulator] At step 3, before writing TRAINING_LANEx_SET/LINK_QUAL_PATTERN_SET to declare the pattern/swing requested by scope, we write link config in LINK_BW_SET/LANE_COUNT_SET on a port that has LTTPR. As LTTPR snoops aux transaction, LINK_BW_SET/LANE_COUNT_SET writes indicate a LT will start [Check DP 2.0 E11 -Sec 3.6.8.2 & 3.6.8.6.3], and LTTPR will reset the link and stop sending DP signals to DPTX/Scope causing the measurements to fail. Note that step 3 will not trigger LT and DP link will never recovered by the Aux Emulator/Scope. The reset of link can be tested with a monitor connected to LTTPR port simply by writing to LINK_BW_SET or LANE_COUNT_SET as follow igt/tools/dpcd_reg write --offset=0x100 --value 0x14 --device=2 OR printf '\x14' | sudo dd of=/dev/drm_dp_aux2 bs=1 count=1 conv=notrunc seek=$((0x100)) This single aux write causes the screen to blank, sending short HPD to DPTX, setting LINK_STATUS_UPDATE = 1 in DPCD 0x204, and triggering LT. As stated in [1]: "Before any TX electrical testing can be performed, the link between a DPTX and DPRX (in this case, a piece of test equipment), including all LTTPRs within the path, shall be trained as defined in this Standard." In addition, changing Phy pattern/Swing/Pre-emphasis (Step 3) uses the same link rate and lane count applied on step 2, so no need to redo LT. The fix is to not rewrite link config in step 3, and just writes TRAINING_LANEx_SET and LINK_QUAL_PATTERN_SET [1]: DP 2.0 E11 - 3.6.11.1 LTTPR DPTX_PHY Electrical Compliance [2]: Configuring UnigrafDPTC Controller - Automation Test Sequence https://www.keysight.com/us/en/assets/9922-01244/help-files/ D9040DPPC-DisplayPort-Test-Software-Online-Help-latest.chm Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Or Cochvi <or.cochvi@intel.com> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220916054900.415804-1-khaled.almahallawy@intel.com
2022-09-28drm/framebuffer: convert to drm_dbg_kms()Simon Ser1-33/+33
Replace DRM_DEBUG_KMS() with drm_dbg_kms() which allows specifying the DRM device to provide more context. Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220905103559.118561-1-contact@emersion.fr
2022-09-28Merge tag 'amd-drm-next-6.1-2022-09-23' of ↵Dave Airlie115-1658/+2219
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.1-2022-09-23: amdgpu: - SDMA fix - Add new firmware types to debugfs/IOCTL version queries - Misc spelling and grammar fixes - Misc code cleanups - DCN 3.2.x fixes - DCN 3.1.x fixes - CS cleanup - Gang submit support - Clang fixes - Non-DC audio fix - GPUVM locking fixes - Vega10 PWN fan speed fix amdkgd: - MQD manager cleanup - Misc spelling and grammar fixes UAPI: - Add new firmware types to the FW version query IOCTL Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220923215729.6061-1-alexander.deucher@amd.com
Powered by cgit, Gruvboxed by Blaster4385.