aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-21Merge branch 'remotes/lorenzo/pci/cadence'Bjorn Helgaas2-7/+2
- Remove obsolete path from comment (Flavio Suligoi) - Simplify cdns_pcie_host_init_address_translation() (Qinglang Miao) * remotes/lorenzo/pci/cadence: PCI: cadence: Simplify cdns_pcie_host_init_address_translation() return expression PCI: cadence-ep: Remove obsolete path from comment
2020-10-21Merge branch 'remotes/lorenzo/pci/brcmstb'Bjorn Helgaas3-71/+432
- Make PCIE_BRCMSTB depend on and default to ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for 7278, 7216, 7211, and new properties (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add control of RESCAL reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add bcm7211, bcm7216, bcm7445, bcm7278 to match list (Jim Quinlan) * remotes/lorenzo/pci/brcmstb: PCI: brcmstb: Add bcm7211, bcm7216, bcm7445, bcm7278 to match list PCI: brcmstb: Set bus max burst size by chip type PCI: brcmstb: Accommodate MSI for older chips PCI: brcmstb: Set additional internal memory DMA viewport sizes PCI: brcmstb: Add control of rescal reset PCI: brcmstb: Add bcm7278 PERST# support PCI: brcmstb: Add suspend and resume pm_ops PCI: brcmstb: Add bcm7278 register info dt-bindings: PCI: Add bindings for more Brcmstb chips PCI: brcmstb: PCIE_BRCMSTB depends on ARCH_BRCMSTB
2020-10-21Merge branch 'remotes/lorenzo/pci/aardvark'Bjorn Helgaas5-46/+96
- Fix s390 build error (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Export pci-bridge-emul functions for use by modules (Pali Rohár) - Make aardvark driver modular (Pali Rohár) - Move PCIe reset code to advk_pcie_train_link() (Pali Rohár) - Convert internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) * remotes/lorenzo/pci/aardvark: PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware phy: marvell: comphy: Convert internal SMCC firmware return codes to errno PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() PCI: aardvark: Implement driver 'remove' function and allow to build it as module PCI: pci-bridge-emul: Export API functions PCI: aardvark: Check for errors from pci_bridge_emul_init() call PCI: aardvark: Fix compilation on s390
2020-10-21Merge branch 'remotes/lorenzo/pci/arm'Bjorn Helgaas2-21/+2
- Remove unused msi_ctrl, io_optional and align_resource fields from ARM struct hw_pci (Lorenzo Pieralisi) * remotes/lorenzo/pci/arm: ARM/PCI: Remove unused fields from struct hw_pci
2020-10-21Merge branch 'remotes/lorenzo/pci/pci-iomap'Bjorn Helgaas2-22/+34
- Remove useless __KERNEL__ preprocessor guard in sparc io_32.h (Lorenzo Pieralisi) - Move ioremap/iounmap declaration so it's visible in asm-generic/io.h (Lorenzo Pieralisi) - Fix memory leak in generic !CONFIG_GENERIC_IOMAP pci_iounmap() implementation (Lorenzo Pieralisi) * remotes/lorenzo/pci/pci-iomap: asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation sparc32: Move ioremap/iounmap declaration before asm-generic/io.h include sparc32: Remove useless io_32.h __KERNEL__ preprocessor guard
2020-10-21Merge branch 'remotes/lorenzo/pci/apei'Bjorn Helgaas5-0/+416
- Add ACPI APEI notifier chain for unknown (vendor) CPER records (Shiju Jose) - Add handling of HiSilicon HIP PCIe controller errors (Yicong Yang) * remotes/lorenzo/pci/apei: PCI: hip: Add handling of HiSilicon HIP PCIe controller errors ACPI / APEI: Add a notifier chain for unknown (vendor) CPER records
2020-10-21Merge branch 'pci/misc'Bjorn Helgaas8-37/+19
- Remove unnecessary #includes (Gustavo Pimentel) - Fix intel_mid_pci.c build error when !CONFIG_ACPI (Randy Dunlap) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Simplify pci-pf-stub by using module_pci_driver() (Liu Shixin) - Print IRQ used by Link Bandwidth Notification (Dongdong Liu) - Update sysfs mmap-related #ifdef comments (Clint Sbisa) - Simplify pci_dev_reset_slot_function() (Lukas Wunner) - Use "NULL" instead of "0" to fix sparse warnings (Gustavo Pimentel) - Simplify bool comparisons (Krzysztof Wilczyński) - Drop double zeroing for P2PDMA sg_init_table() (Julia Lawall) * pci/misc: PCI: v3-semi: Remove unneeded break PCI/P2PDMA: Drop double zeroing for sg_init_table() PCI: Simplify bool comparisons PCI: endpoint: Use "NULL" instead of "0" as a NULL pointer PCI: Simplify pci_dev_reset_slot_function() PCI: Update mmap-related #ifdef comments PCI/LINK: Print IRQ number used by port PCI/IOV: Simplify pci-pf-stub with module_pci_driver() PCI: Use scnprintf(), not snprintf(), in sysfs "show" functions x86/PCI: Fix intel_mid_pci.c build error when ACPI is not enabled PCI: Remove unnecessary header includes
2020-10-21Merge branch 'pci/pm'Bjorn Helgaas13-88/+57
- Remove unused pcibios_pm_ops (Vaibhav Gupta) - Rename pci_dev.d3_delay to d3hot_delay (Krzysztof Wilczyński) - Apply D2 transition delay as microseconds, not milliseconds (Bjorn Helgaas) * pci/pm: PCI/PM: Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" PCI/PM: Remove unused PCI_PM_BUS_WAIT PCI/PM: Rename pci_dev.d3_delay to d3hot_delay PCI/PM: Remove unused pcibios_pm_ops
2020-10-21Merge branch 'pci/hotplug'Bjorn Helgaas6-19/+21
- Use for_each_child_of_node() and for_each_node_by_name() instead of open-coding them (Qinglang Miao) - Reduce pciehp noisiness on hot removal (Lukas Wunner) - Remove unused assignment in shpchp (Krzysztof Wilczyński) * pci/hotplug: PCI: shpchp: Remove unused 'rc' assignment PCI: pciehp: Reduce noisiness on hot removal PCI: rpadlpar: Use for_each_child_of_node() and for_each_node_by_name()
2020-10-21Merge branch 'pci/enumeration'Bjorn Helgaas6-1/+107
- Tone down message about missing optional MCFG (Jeremy Linton) - Add schedule point in pci_read_config() (Jiang Biao) - Add Ampere Altra SOC MCFG quirk (Tuan Phan) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) * pci/enumeration: PCI: Add Kconfig options for MPS/MRRS strategy PCI/ACPI: Add Ampere Altra SOC MCFG quirk PCI: Add schedule point in pci_read_config() PCI/ACPI: Tone down missing MCFG message
2020-10-21Merge branch 'pci/aspm'Bjorn Helgaas4-151/+150
- Remove struct aspm_register_info (Saheed O. Bolarinwa) - Remove struct pcie_link_state.l1ss (Saheed O. Bolarinwa) * pci/aspm: PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier
2020-10-21Merge branch 'pci/acs'Bjorn Helgaas2-0/+14
- Enable Translation Blocking for external devices (Rajat Jain) * pci/acs: PCI/ACS: Enable Translation Blocking for external devices
2020-10-21PCI: vmd: Update VMD PM to correctly use generic PCI PMJon Derrick1-2/+0
The pci_save_state() call in vmd_suspend() can be performed by pci_pm_suspend_irq(). This also allows VMD to benefit from the call into pci_prepare_to_sleep(). The pci_restore_state() call in vmd_resume() was restoring state after pci_pm_resume()::pci_restore_standard_config() had already restored state. It's also been suspected that the config state should have been restored before re-requesting IRQs instead of afterwards. Remove the pci_save_state()/pci_restore_state() calls in vmd_suspend()/vmd_resume() to allow proper flow through generic PCI core Power Management code. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jon Derrick <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Cc: Kai-Heng Feng <[email protected]> Cc: You-Sheng Yang <[email protected]>
2020-10-21NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copyDai Ngo8-8/+219
NFS_FS=y as dependency of CONFIG_NFSD_V4_2_INTER_SSC still have build errors and some configs with NFSD=m to get NFS4ERR_STALE error when doing inter server copy. Added ops table in nfs_common for knfsd to access NFS client modules. Fixes: 3ac3711adb88 ("NFSD: Fix NFS server build errors") Signed-off-by: Dai Ngo <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2020-10-20Merge tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarrayLinus Torvalds11-35/+116
Pull XArray updates from Matthew Wilcox: - Fix the test suite after introduction of the local_lock - Fix a bug in the IDA spotted by Coverity - Change the API that allows the workingset code to delete a node - Fix xas_reload() when dealing with entries that occupy multiple indices - Add a few more tests to the test suite - Fix an unsigned int being shifted into an unsigned long * tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray: XArray: Fix xas_create_range for ranges above 4 billion radix-tree: fix the comment of radix_tree_next_slot() XArray: Fix xas_reload for multi-index entries XArray: Add private interface for workingset node deletion XArray: Fix xas_for_each_conflict documentation XArray: Test marked multiorder iterations XArray: Test two more things about xa_cmpxchg ida: Free allocated bitmap in error path radix tree test suite: Fix compilation
2020-10-20Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds36-502/+989
Pull NFS client updates from Anna Schumaker: "Stable Fixes: - Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+ - Fix nfs_path in case of a rename retry - Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag New features and improvements: - Replace dprintk() calls with tracepoints - Make cache consistency bitmap dynamic - Added support for the NFS v4.2 READ_PLUS operation - Improvements to net namespace uniquifier Other bugfixes and cleanups: - Remove redundant clnt pointer - Don't update timeout values on connection resets - Remove redundant tracepoints - Various cleanups to comments - Fix oops when trying to use copy_file_range with v4.0 source server - Improvements to flexfiles mirrors - Add missing 'local_lock=posix' mount option" * tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits) NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag NFSv4: Fix up RCU annotations for struct nfs_netns_client NFS: Only reference user namespace from nfs4idmap struct instead of cred nfs: add missing "posix" local_lock constant table definition NFSv4: Use the net namespace uniquifier if it is set NFSv4: Clean up initialisation of uniquified client id strings NFS: Decode a full READ_PLUS reply SUNRPC: Add an xdr_align_data() function NFS: Add READ_PLUS hole segment decoding SUNRPC: Add the ability to expand holes in data pages SUNRPC: Split out _shift_data_right_tail() SUNRPC: Split out xdr_realign_pages() from xdr_align_pages() NFS: Add READ_PLUS data segment support NFS: Use xdr_page_pos() in NFSv4 decode_getacl() SUNRPC: Implement a xdr_page_pos() function SUNRPC: Split out a function for setting current page NFS: fix nfs_path in case of a rename retry fs: nfs: return per memcg count for xattr shrinkers NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE nfs: remove incorrect fallthrough label ...
2020-10-20Merge tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-blockLinus Torvalds7-301/+475
Pull io_uring updates from Jens Axboe: "A mix of fixes and a few stragglers. In detail: - Revert the bogus __read_mostly that we discussed for the initial pull request. - Fix a merge window regression with fixed file registration error path handling. - Fix io-wq numa node affinities. - Series abstracting out an io_identity struct, making it both easier to see what the personality items are, and also easier to to adopt more. Use this to cover audit logging. - Fix for read-ahead disabled block condition in async buffered reads, and using single page read-ahead to unify what generic_file_buffer_read() path is used. - Series for REQ_F_COMP_LOCKED fix and removal of it (Pavel) - Poll fix (Pavel)" * tag 'io_uring-5.10-2020-10-20' of git://git.kernel.dk/linux-block: (21 commits) io_uring: use blk_queue_nowait() to check if NOWAIT supported mm: use limited read-ahead to satisfy read mm: mark async iocb read as NOWAIT once some data has been copied io_uring: fix double poll mask init io-wq: inherit audit loginuid and sessionid io_uring: use percpu counters to track inflight requests io_uring: assign new io_identity for task if members have changed io_uring: store io_identity in io_uring_task io_uring: COW io_identity on mismatch io_uring: move io identity items into separate struct io_uring: rely solely on work flags to determine personality. io_uring: pass required context in as flags io-wq: assign NUMA node locality if appropriate io_uring: fix error path cleanup in io_sqe_files_register() Revert "io_uring: mark io_uring_fops/io_op_defs as __read_mostly" io_uring: fix REQ_F_COMP_LOCKED by killing it io_uring: dig out COMP_LOCK from deep call chain io_uring: don't put a poll req under spinlock io_uring: don't unnecessarily clear F_LINK_TIMEOUT io_uring: don't set COMP_LOCKED if won't put ...
2020-10-20PCI: vmd: Create IRQ allocation helperJon Derrick1-41/+53
Move the IRQ allocation and SRCU initialization code to a new helper. No functional changes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jon Derrick <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2020-10-20PCI: vmd: Create IRQ Domain configuration helperJon Derrick1-17/+35
Move the IRQ and MSI Domain configuration code to new helpers. No functional changes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jon Derrick <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2020-10-20PCI: vmd: Create bus offset configuration helperJon Derrick1-21/+32
Move the bus offset configuration discovery code to a new helper. Modify the bus offset 2-bit decode switch to have a 0 case and a default error case, just in case the field is expanded in future hardware. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jon Derrick <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2020-10-20PCI: vmd: Create physical offset helperJon Derrick1-43/+62
Move the guest-passthrough physical offset discovery code to a new helper. No functional changes. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jon Derrick <[email protected]> Signed-off-by: Lorenzo Pieralisi <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd64-509/+2826
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk
2020-10-20Merge branches 'clk-semicolon', 'clk-axi-clkgen', 'clk-qoriq', 'clk-baikal', ↵Stephen Boyd9-68/+155
'clk-const' and 'clk-mmp2' into clk-next * clk-semicolon: clk: meson: use semicolons rather than commas to separate statements clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements clk: uniphier: use semicolons rather than commas to separate statements * clk-axi-clkgen: clk: axi-clkgen: Set power bits for fractional mode clk: axi-clkgen: Add support for fractional dividers * clk-qoriq: clk: qoriq: modify MAX_PLL_DIV to 32 * clk-baikal: clk: baikal-t1: Mark Ethernet PLL as critical * clk-const: clk: pxa: Constify static struct clk_ops * clk-mmp2: clk: mmp2: Fix the display clock divider base
2020-10-20Merge branches 'clk-simplify', 'clk-ti', 'clk-tegra', 'clk-rockchip' and ↵Stephen Boyd35-104/+1915
'clk-mediatek' into clk-next - Small non-critical fixes for TI clk driver - Support Mediatek MT8167 clks * clk-simplify: clk: mediatek: fix platform_no_drv_owner.cocci warnings clk: mediatek: mt7629: simplify the return expression of mtk_infrasys_init clk: mediatek: mt6797: simplify the return expression of mtk_infrasys_init * clk-ti: clk: ti: dra7: add missing clkctrl register for SHA2 instance clk: ti: clockdomain: fix static checker warning clk: ti: autoidle: add checks against NULL pointer reference clk: keystone: sci-clk: add 10% slack to set_rate clk: keystone: sci-clk: cache results of last query rate operation clk: keystone: sci-clk: fix parsing assigned-clock data during probe * clk-tegra: clk: tegra: Drop !provider check in tegra210_clk_emc_set_rate() * clk-rockchip: clk: rockchip: Initialize hw to error to avoid undefined behavior clk: rockchip: rk3399: Support module build clk: rockchip: fix the clk config to support module build clk: rockchip: Export some clock common APIs for module drivers clk: rockchip: Export rockchip_register_softrst() clk: rockchip: Export rockchip_clk_register_ddrclk() clk: rockchip: Use clk_hw_register_composite instead of clk_register_composite calls clk: rockchip: rk3308: drop unused mux_timer_src_p * clk-mediatek: clk: mediatek: Add MT8167 clock support dt-bindings: clock: mediatek: add bindings for MT8167 clocks clk: mediatek: add UART0 clock support
2020-10-20Merge branches 'clk-renesas', 'clk-amlogic', 'clk-allwinner', 'clk-samsung', ↵Stephen Boyd34-136/+2182
'clk-doc' and 'clk-unused' into clk-next - Remove various unused variables in clk drivers * clk-renesas: clk: renesas: rcar-gen3: Update description for RZ/G2 clk: renesas: cpg-mssr: Add support for R-Car V3U clk: renesas: cpg-mssr: Add register pointers into struct cpg_mssr_priv clk: renesas: cpg-mssr: Use enum clk_reg_layout instead of a boolean flag dt-bindings: clock: renesas,cpg-mssr: Document r8a779a0 dt-bindings: clock: Add r8a779a0 CPG Core Clock Definitions dt-bindings: power: Add r8a779a0 SYSC power domain definitions clk: renesas: rcar-gen2: Rename vsp1-(sy|rt) clocks to vsp(s|r) clk: renesas: r8a7742: Add clk entry for VSPR * clk-amlogic: clk: meson: make shipped controller configurable clk: meson: g12a: mark fclk_div2 as critical clk: meson: axg-audio: fix g12a tdmout sclk inverter clk: meson: axg-audio: separate axg and g12a regmap tables clk: meson: add sclk-ws driver * clk-allwinner: clk: sunxi-ng: sun8i: r40: Use sigma delta modulation for audio PLL clk: sunxi-ng: add support for the Allwinner A100 CCU dt-bindings: clk: sunxi-ccu: add compatible string for A100 CCU and R-CCU * clk-samsung: clk: s2mps11: initialize driver via module_platform_driver clk: samsung: Use cached clk_hws instead of __clk_lookup() calls clk: samsung: exynos5420/5250: Add IDs to the CPU parent clk definitions clk: samsung: Add clk ID definitions for the CPU parent clocks clk: samsung: exynos5420: Avoid __clk_lookup() calls when enabling clocks clk: samsung: exynos5420: Add definition of clock ID for mout_sw_aclk_g3d clk: samsung: Keep top BPLL mux on Exynos542x enabled * clk-doc: clk: davinci: add missing kerneldoc clk: fixed: add missing kerneldoc * clk-unused: clk: socfpga: agilex: Remove unused variable 'cntr_mux' clk: si5341: drop unused 'err' variable clk: mmp: pxa1928: drop unused 'clk' variable clk: at91: drop unused at91sam9g45_pcr_layout
2020-10-20Merge tag 'for-v5.10' of ↵Linus Torvalds55-1383/+3938
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - add wireless type - properly document current direction Battery/charger driver changes: - new fuel-gauge/charger driver for RN5T618/RN5T619 - new charger driver for BQ25980, BQ25975 and BQ25960 - bq27xxx-battery: add support for TI bq34z100 - gpio-charger: convert to GPIO descriptors - gpio-charger: add optional support for charge current limiting - max17040: add support for max17041, max17043, max17044 - max17040: add support for max17048, max17049, max17058, max17059 - smb347-charger: add DT support - smb247-charger: add SMB345 and SMB358 support - simple-battery: add temperature properties - lots of minor fixes, cleanups and DT binding YAML conversions Reset drivers: - ocelot: Add support for Sparx5" * tag 'for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (81 commits) power: reset: POWER_RESET_OCELOT_RESET should depend on Ocelot or Sparx5 power: supply: bq25980: Fix uninitialized wd_reg_val and overrun power: supply: ltc2941: Fix ptr to enum cast power: supply: test-power: revise parameter printing to use sprintf power: supply: charger-manager: fix incorrect check on charging_duration_ms power: supply: max17040: Fix ptr to enum cast power: supply: bq25980: Fix uninitialized wd_reg_val power: supply: bq25980: remove redundant zero check on ret power: reset: ocelot: Add support for Sparx5 dt-bindings: reset: ocelot: Add Sparx5 support power: supply: sbs-battery: keep error code when get_property() fails power: supply: bq25980: Add support for the BQ259xx family dt-binding: bq25980: Add the bq25980 flash charger power: supply: fix spelling mistake "unprecise" -> "imprecise" power: supply: test_power: add missing newlines when printing parameters by sysfs power: supply: pm2301: drop duplicated i2c_device_id power: supply: charger-manager: drop unused charger assignment power: supply: rt9455: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: goldfish: skip 'struct acpi_device_id' when !CONFIG_ACPI power: supply: bq25890: skip 'struct acpi_device_id' when !CONFIG_ACPI ...
2020-10-20SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()Martijn de Gouw1-10/+17
When the passed token is longer than 4032 bytes, the remaining part of the token must be copied from the rqstp->rq_arg.pages. But the copy must make sure it happens in a consecutive way. With the existing code, the first memcpy copies 'length' bytes from argv->iobase, but since the header is in front, this never fills the whole first page of in_token->pages. The mecpy in the loop copies the following bytes, but starts writing at the next page of in_token->pages. This leaves the last bytes of page 0 unwritten. Symptoms were that users with many groups were not able to access NFS exports, when using Active Directory as the KDC. Signed-off-by: Martijn de Gouw <[email protected]> Fixes: 5866efa8cbfb "SUNRPC: Fix svcauth_gss_proxy_init()" Signed-off-by: J. Bruce Fields <[email protected]>
2020-10-20sunrpc: raise kernel RPC channel buffer sizeRoberto Bergantinos Corpas1-1/+1
Its possible that using AUTH_SYS and mountd manage-gids option a user may hit the 8k RPC channel buffer limit. This have been observed on field, causing unanswered RPCs on clients after mountd fails to write on channel : rpc.mountd[11231]: auth_unix_gid: error writing reply Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so lets match those two. Signed-off-by: Roberto Bergantinos Corpas <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
2020-10-20Merge tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds14-34/+72
Pull drm fixes from Dave Airlie: "Some fixes queued up already for i915 and amdgpu, I've also included the fix for the clang warning you've seen. i915: - set all unused color plane offsets to ~0xfff again (Ville) - fix TGL DKL PHY DP vswing handling (Ville) amdgpu: - DCN clang warning fix - eDP fix - BACO fix - kernel documentation fixes - SMU7 mclk fix - VCN1 hw bug workaround amdkfd: - kvfree vs kfree fix" * tag 'drm-next-2020-10-19' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: Fix incorrect dsc force enable logic drm/amdkfd: Use kvfree in destroy_crat_image drm/amdgpu: vcn and jpeg ring synchronization drm/amd/pm: increase mclk switch threshold to 200 us docs: amdgpu: fix a warning when building the documentation drm/amd/display: kernel-doc: document force_timing_sync drm/amdgpu/swsmu: init the baco mutex in early_init drm/amd/display: Fix module load hangs when connected to an eDP drm/i915: Set all unused color plane offsets to ~0xfff again drm/i915: Fix TGL DKL PHY DP vswing handling
2020-10-20Merge tag 'iommu-fix-v5.10' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fix from Joerg Roedel: "Fix a build regression with !CONFIG_IOMMU_API" * tag 'iommu-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Don't dereference iommu_device if IOMMU_API is not built
2020-10-20clk: imx8mq: Fix usdhc parents orderAbel Vesa1-2/+2
According to the latest RM (see Table 5-1. Clock Root Table), both usdhc root clocks have the parent order as follows: 000 - 25M_REF_CLK 001 - SYSTEM_PLL1_DIV2 010 - SYSTEM_PLL1_CLK 011 - SYSTEM_PLL2_DIV2 100 - SYSTEM_PLL3_CLK 101 - SYSTEM_PLL1_DIV3 110 - AUDIO_PLL2_CLK 111 - SYSTEM_PLL1_DIV8 So the audio_pll2_out and sys3_pll_out have to be swapped. Fixes: b80522040cd3 ("clk: imx: Add clock driver for i.MX8MQ CCM") Signed-off-by: Abel Vesa <[email protected]> Reported-by: Cosmin Stefan Stoica <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2020-10-20clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already onStephen Boyd1-0/+8
If the GDSC is enabled out of boot but doesn't have the retain ff bit set we will get confusing results where the registers that are powered by the GDSC lose their contents on the first power off of the GDSC but thereafter they retain their contents. This is because gdsc_init() fails to make sure the RETAIN_FF bit is set when it probes the GDSC the first time and thus powering off the GDSC causes the register contents to be reset. We do set the RETAIN_FF bit the next time we power on the GDSC, see gdsc_enable(), so that subsequent GDSC power off's don't lose register contents state. Forcibly set the bit at device probe time so that the kernel's assumed view of the GDSC is consistent with the state of the hardware. This fixes a problem where the audio PLL doesn't work on sc7180 when the bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a noise) but critically doesn't set the RETAIN_FF bit. Cc: Douglas Anderson <[email protected]> Cc: Taniya Das <[email protected]> Cc: Rajendra Nayak <[email protected]> Fixes: 173722995cdb ("clk: qcom: gdsc: Add support to enable retention of GSDCR") Signed-off-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Taniya Das <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Tested-by: Douglas Anderson <[email protected]>
2020-10-20Merge tag 'for-linus-5.10b-rc1b-tag' of ↵Linus Torvalds19-165/+707
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - A single patch to fix the Xen security issue XSA-331 (malicious guests can DoS dom0 by triggering NULL-pointer dereferences or access to stale data). - A larger series to fix the Xen security issue XSA-332 (malicious guests can DoS dom0 by sending events at high frequency leading to dom0's vcpus being busy in IRQ handling for elongated times). * tag 'for-linus-5.10b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: block rogue events for some time xen/events: defer eoi in case of excessive number of events xen/events: use a common cpu hotplug hook for event channels xen/events: switch user event channels to lateeoi model xen/pciback: use lateeoi irq binding xen/pvcallsback: use lateeoi irq binding xen/scsiback: use lateeoi irq binding xen/netback: use lateeoi irq binding xen/blkback: use lateeoi irq binding xen/events: add a new "late EOI" evtchn framework xen/events: fix race in evtchn_fifo_unmask() xen/events: add a proper barrier to 2-level uevent unmasking xen/events: avoid removing an event channel while handling it
2020-10-20Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds34-112/+263
Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
2020-10-20vfio iommu type1: Fix memory leak in vfio_iommu_type1_pin_pagesXiaoyang Xu1-1/+2
pfn is not added to pfn_list when vfio_add_to_pfn_list fails. vfio_unpin_page_external will exit directly without calling vfio_iova_put_vfio_pfn. This will lead to a memory leak. Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Signed-off-by: Xiaoyang Xu <[email protected]> [aw: simplified logic, add Fixes] Signed-off-by: Alex Williamson <[email protected]>
2020-10-20Merge tag 'arc-5.10-rc1' of ↵Linus Torvalds36-1362/+15
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "The bulk of ARC pull request is removal of EZChip NPS platform which was suffering from constant bitrot. In recent years EZChip has gone though multiple successive acquisitions and I guess things and people move on. I would like to take this opportunity to recognize and thank all those good folks (Gilad, Noam, Ofer...) for contributing major bits to ARC port (SMP, Big Endian). Summary: - drop support for EZChip NPS platform - misc other fixes" * tag 'arc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: include/asm: fix typos of "themselves" ARC: SMP: fix typo and use "come up" instead of "comeup" ARC: [dts] fix the errors detected by dtbs_check arc: plat-hsdk: fix kconfig dependency warning when !RESET_CONTROLLER ARC: [plat-eznps]: Drop support for EZChip NPS platform
2020-10-20PCI: v3-semi: Remove unneeded breakTom Rix1-1/+0
A break is not needed if it is preceded by a return Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Tom Rix <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Linus Walleij <[email protected]>
2020-10-21kbuild: Use uname for LINUX_COMPILE_HOST detectionChris Down1-1/+1
`hostname` may not be present on some systems as it's not mandated by POSIX/SUSv4. This isn't just a theoretical problem: on Arch Linux, `hostname` is provided by `inetutils`, which isn't part of the base distribution. ./scripts/mkcompile_h: line 38: hostname: command not found Use `uname -n` instead, which is more likely to be available (and mandated by standards). Signed-off-by: Chris Down <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-10-21kbuild: Only add -fno-var-tracking-assignments for old GCC versionsMark Wielaard1-1/+5
Some old GCC versions between 4.5.0 and 4.9.1 might miscompile code with -fvar-tracking-assingments (which is enabled by default with -g -O2). Commit 2062afb4f804 ("Fix gcc-4.9.0 miscompilation of load_balance() in scheduler") added -fno-var-tracking-assignments unconditionally to work around this. But newer versions of GCC no longer have this bug, so only add it for versions of GCC before 5.0. This allows various tools such as a perf probe or gdb debuggers or systemtap to resolve variable locations using dwarf locations in more code. Signed-off-by: Mark Wielaard <[email protected]> Acked-by: Ian Rogers <[email protected]> Reviewed-by: Andi Kleen <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-10-21kbuild: remove leftover comment for filechk utilityRasmus Villemoes1-2/+0
After commit 43fee2b23895 ("kbuild: do not redirect the first prerequisite for filechk"), the rule is no longer automatically passed $< as stdin, so remove the stale comment. Fixes: 43fee2b23895 ("kbuild: do not redirect the first prerequisite for filechk") Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-10-21treewide: remove DISABLE_LTOSami Tolvanen5-9/+1
This change removes all instances of DISABLE_LTO from Makefiles, as they are currently unused, and the preferred method of disabling LTO is to filter out the flags instead. Note added by Masahiro Yamada: DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272) Suggested-by: Kees Cook <[email protected]> Signed-off-by: Sami Tolvanen <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2020-10-20PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()Hou Zhiqiang1-0/+11
NXP Layerscape (ls1028a, ls2088a), dra7xxx and imx6 platforms are either programmed or statically configured to forward the error triggered by a link-down state (eg no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal. Enumerating a PCI tree when the PCIe link is down is not sensible either, so even if the link-up check is racy (link can go down after map_bus() is called) add a link-up check in map_bus() to prevent issuing configuration transactions when the link is down. SError report: SError Interrupt on CPU2, code 0xbf000002 -- SError CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) pc : pci_generic_config_read+0x3c/0xe0 lr : pci_generic_config_read+0x24/0xe0 sp : ffff80001003b7b0 x29: ffff80001003b7b0 x28: ffff80001003ba74 x27: ffff000971d96800 x26: ffff00096e77e0a8 x25: ffff80001003b874 x24: ffff80001003b924 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000000 x20: ffff80001003b874 x19: 0000000000000004 x18: ffffffffffffffff x17: 00000000000000c0 x16: fffffe0025981840 x15: ffffb94c75b69948 x14: 62203a383634203a x13: 666e6f635f726568 x12: 202c31203d207265 x11: 626d756e3e2d7375 x10: 656877202c307830 x9 : 203d206e66766564 x8 : 0000000000000908 x7 : 0000000000000908 x6 : ffff800010900000 x5 : ffff00096e77e080 x4 : 0000000000000000 x3 : 0000000000000003 x2 : 84fa3440ff7e7000 x1 : 0000000000000000 x0 : ffff800010034000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 Hardware name: LS1046A RDB Board (DT) Call trace: dump_backtrace+0x0/0x1c0 show_stack+0x18/0x28 dump_stack+0xd8/0x134 panic+0x180/0x398 add_taint+0x0/0xb0 arm64_serror_panic+0x78/0x88 do_serror+0x68/0x180 el1_error+0x84/0x100 pci_generic_config_read+0x3c/0xe0 dw_pcie_rd_other_conf+0x78/0x110 pci_bus_read_config_dword+0x88/0xe8 pci_bus_generic_read_dev_vendor_id+0x30/0x1b0 pci_bus_read_dev_vendor_id+0x4c/0x78 pci_scan_single_device+0x80/0x100 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hou Zhiqiang <[email protected]> [[email protected]: rewrote the commit log, remove Fixes tag] Signed-off-by: Lorenzo Pieralisi <[email protected]>
2020-10-20xen/events: block rogue events for some timeJuergen Gross2-6/+24
In order to avoid high dom0 load due to rogue guests sending events at high frequency, block those events in case there was no action needed in dom0 to handle the events. This is done by adding a per-event counter, which set to zero in case an EOI without the XEN_EOI_FLAG_SPURIOUS is received from a backend driver, and incremented when this flag has been set. In case the counter is 2 or higher delay the EOI by 1 << (cnt - 2) jiffies, but not more than 1 second. In order not to waste memory shorten the per-event refcnt to two bytes (it should normally never exceed a value of 2). Add an overflow check to evtchn_get() to make sure the 2 bytes really won't overflow. This is part of XSA-332. Cc: [email protected] Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/events: defer eoi in case of excessive number of eventsJuergen Gross5-32/+216
In case rogue guests are sending events at high frequency it might happen that xen_evtchn_do_upcall() won't stop processing events in dom0. As this is done in irq handling a crash might be the result. In order to avoid that, delay further inter-domain events after some time in xen_evtchn_do_upcall() by forcing eoi processing into a worker on the same cpu, thus inhibiting new events coming in. The time after which eoi processing is to be delayed is configurable via a new module parameter "event_loop_timeout" which specifies the maximum event loop time in jiffies (default: 2, the value was chosen after some tests showing that a value of 2 was the lowest with an only slight drop of dom0 network throughput while multiple guests performed an event storm). How long eoi processing will be delayed can be specified via another parameter "event_eoi_delay" (again in jiffies, default 10, again the value was chosen after testing with different delay values). This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/events: use a common cpu hotplug hook for event channelsJuergen Gross3-21/+47
Today only fifo event channels have a cpu hotplug callback. In order to prepare for more percpu (de)init work move that callback into events_base.c and add percpu_init() and percpu_deinit() hooks to struct evtchn_ops. This is part of XSA-332. Cc: [email protected] Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/events: switch user event channels to lateeoi modelJuergen Gross1-4/+3
Instead of disabling the irq when an event is received and enabling it again when handled by the user process use the lateeoi model. This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Tested-by: Stefano Stabellini <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/pciback: use lateeoi irq bindingJuergen Gross4-19/+56
In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving pcifront use the lateeoi irq binding for pciback and unmask the event channel only just before leaving the event handling function. Restructure the handling to support that scheme. Basically an event can come in for two reasons: either a normal request for a pciback action, which is handled in a worker, or in case the guest has finished an AER request which was requested by pciback. When an AER request is issued to the guest and a normal pciback action is currently active issue an EOI early in order to be able to receive another event when the AER request has been finished by the guest. Let the worker processing the normal requests run until no further request is pending, instead of starting a new worker ion that case. Issue the EOI only just before leaving the worker. This scheme allows to drop calling the generic function xen_pcibk_test_and_schedule_op() after processing of any request as the handling of both request types is now separated more cleanly. This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/pvcallsback: use lateeoi irq bindingJuergen Gross1-30/+46
In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving pvcallsfront use the lateeoi irq binding for pvcallsback and unmask the event channel only after handling all write requests, which are the ones coming in via an irq. This requires modifying the logic a little bit to not require an event for each write request, but to keep the ioworker running until no further data is found on the ring page to be processed. This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Stefano Stabellini <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/scsiback: use lateeoi irq bindingJuergen Gross1-10/+13
In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving scsifront use the lateeoi irq binding for scsiback and unmask the event channel only just before leaving the event handling function. In case of a ring protocol error don't issue an EOI in order to avoid the possibility to use that for producing an event storm. This at once will result in no further call of scsiback_irq_fn(), so the ring_error struct member can be dropped and scsiback_do_cmd_fn() can signal the protocol error via a negative return value. This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Wei Liu <[email protected]>
2020-10-20xen/netback: use lateeoi irq bindingJuergen Gross4-14/+86
In order to reduce the chance for the system becoming unresponsive due to event storms triggered by a misbehaving netfront use the lateeoi irq binding for netback and unmask the event channel only just before going to sleep waiting for new events. Make sure not to issue an EOI when none is pending by introducing an eoi_pending element to struct xenvif_queue. When no request has been consumed set the spurious flag when sending the EOI for an interrupt. This is part of XSA-332. Cc: [email protected] Reported-by: Julien Grall <[email protected]> Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Reviewed-by: Wei Liu <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.