| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
After moving ext4's bmap to iomap interface, swapon functionality
on files created using fallocate (which creates unwritten extents) are
failing. This is since iomap_bmap interface returns 0 for unwritten
extents and thus generic_swapfile_activate considers this as holes
and hence bail out with below kernel msg :-
[340.915835] swapon: swapfile has holes
To fix this we need to implement ->swap_activate aops in ext4
which will use ext4_iomap_report_ops. Since we only need to return
the list of extents so ext4_iomap_report_ops should be enough.
Cc: [email protected]
Reported-by: Yuxuan Shui <[email protected]>
Fixes: ac58e4fb03f ("ext4: move ext4 bmap to use iomap infrastructure")
Signed-off-by: Ritesh Harjani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Check that alloc and free types of functions match each other.
Signed-off-by: Denis Efremov <[email protected]>
Signed-off-by: Julia Lawall <[email protected]>
|
|
For the case where read-ahead is disabled on the file, or if the cgroup
is congested, ensure that we can at least do 1 page of read-ahead to
make progress on the read in an async fashion. This could potentially be
larger, but it's not needed in terms of functionality, so let's error on
the side of caution as larger counts of pages may run into reclaim
issues (particularly if we're congested).
This makes sure we're not hitting the potentially sync ->readpage() path
for IO that is marked IOCB_WAITQ, which could cause us to block. It also
means we'll use the same path for IO, regardless of whether or not
read-ahead happens to be disabled on the lower level device.
Acked-by: Johannes Weiner <[email protected]>
Reported-by: Matthew Wilcox (Oracle) <[email protected]>
Reported-by: Hao_Xu <[email protected]>
[axboe: updated for new ractl API]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Once we've copied some data for an iocb that is marked with IOCB_WAITQ,
we should no longer attempt to async lock a new page. Instead make sure
we return the copied amount, and let the caller retry, instead of
returning -EIOCBQUEUED for a new page.
This should only be possible with read-ahead disabled on the below
device, and multiple threads racing on the same file. Haven't been able
to reproduce on anything else.
Cc: [email protected] # v5.9
Fixes: 1a0a7853b901 ("mm: support async buffered reads in generic_file_buffered_read()")
Reported-by: Kent Overstreet <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools updates from Arnaldo Carvalho de Melo:
- cgroup improvements for 'perf stat', allowing for compact
specification of events and cgroups in the command line.
- Support per thread topdown metrics in 'perf stat'.
- Support sample-read topdown metric group in 'perf record'
- Show start of latency in addition to its start in 'perf sched
latency'.
- Add min, max to 'perf script' futex-contention output, in addition to
avg.
- Allow usage of 'perf_event_attr->exclusive' attribute via the new
':e' event modifier.
- Add 'snapshot' command to 'perf record --control', using it with
Intel PT.
- Support FIFO file names as alternative options to 'perf record
--control'.
- Introduce branch history "streams", to compare 'perf record' runs
with 'perf diff' based on branch records and report hot streams.
- Support PE executable symbol tables using libbfd, to profile, for
instance, wine binaries.
- Add filter support for option 'perf ftrace -F/--funcs'.
- Allow configuring the 'disassembler_style' 'perf annotate' knob via
'perf config'
- Update CascadelakeX and SkylakeX JSON vendor events files.
- Add support for parsing perchip/percore JSON vendor events.
- Add power9 hv_24x7 core level metric events.
- Add L2 prefetch, ITLB instruction fetch hits JSON events for AMD
zen1.
- Enable Family 19h users by matching Zen2 AMD vendor events.
- Use debuginfod in 'perf probe' when required debug files not found
locally.
- Display negative tid in non-sample events in 'perf script'.
- Make GTK2 support opt-in
- Add build test with GTK+
- Add missing -lzstd to the fast path feature detection
- Add scripts to auto generate 'mmap', 'mremap' string<->id tables for
use in 'perf trace'.
- Show python test script in verbose mode.
- Fix uncore metric expressions
- Msan uninitialized use fixes.
- Use condition variables in 'perf bench numa'
- Autodetect python3 binary in systems without python2.
- Support md5 build ids in addition to sha1.
- Add build id 'perf test' regression test.
- Fix printable strings in python3 scripts.
- Fix off by ones in 'perf trace' in arches using libaudit.
- Fix JSON event code for events referencing std arch events.
- Introduce 'perf test' shell script for Arm CoreSight testing.
- Add rdtsc() for Arm64 for used in the PERF_RECORD_TIME_CONV metadata
event and in 'perf test tsc'.
- 'perf c2c' improvements: Add "RMT Load Hit" metric, "Total Stores",
fixes and documentation update.
- Fix usage of reloc_sym in 'perf probe' when using both kallsyms and
debuginfo files.
- Do not print 'Metric Groups:' unnecessarily in 'perf list'
- Refcounting fixes in the event parsing code.
- Add expand cgroup event 'perf test' entry.
- Fix out of bounds CPU map access when handling armv8_pmu events in
'perf stat'.
- Add build-id injection 'perf bench' benchmark.
- Enter namespace when reading build-id in 'perf inject'.
- Do not load map/dso when injecting build-id speeding up the 'perf
inject' process.
- Add --buildid-all option to avoid processing all samples, just the
mmap metadata events.
- Add feature test to check if libbfd has buildid support
- Add 'perf test' entry for PE binary format support.
- Fix typos in power8 PMU vendor events JSON files.
- Hide libtraceevent non API functions.
* tag 'perf-tools-for-v5.10-2020-10-15' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (113 commits)
perf c2c: Update documentation for metrics reorganization
perf c2c: Add metrics "RMT Load Hit"
perf c2c: Correct LLC load hit metrics
perf c2c: Change header for LLC local hit
perf c2c: Use more explicit headers for HITM
perf c2c: Change header from "LLC Load Hitm" to "Load Hitm"
perf c2c: Organize metrics based on memory hierarchy
perf c2c: Display "Total Stores" as a standalone metrics
perf c2c: Display the total numbers continuously
perf bench: Use condition variables in numa.
perf jevents: Fix event code for events referencing std arch events
perf diff: Support hot streams comparison
perf streams: Report hot streams
perf streams: Calculate the sum of total streams hits
perf streams: Link stream pair
perf streams: Compare two streams
perf streams: Get the evsel_streams by evsel_idx
perf streams: Introduce branch history "streams"
perf intel-pt: Improve PT documentation slightly
perf tools: Add support for exclusive groups/events
...
|
|
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Boris Brezillon:
- Fix DAA for the pre-reserved address case
- Fix an error path in the cadence driver
* tag 'i3c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: Fix error return in cdns_i3c_master_probe()
i3c: master: fix for SETDASA and DAA process
i3c: master add i3c_master_attach_boardinfo to preserve boardinfo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"NAND core changes:
- Drop useless 'depends on' in Kconfig
- Add an extra level in the Kconfig hierarchy
- Trivial spellings
- Dynamic allocation of the interface configurations
- Dropping the default ONFI timing mode
- Various cleanup (types, structures, naming, comments)
- Hide the chip->data_interface indirection
- Add the generic rb-gpios property
- Add the ->choose_interface_config() hook
- Introduce nand_choose_best_sdr_timings()
- Use default values for tPROG_max and tBERS_max
- Avoid redefining tR_max and tCCS_min
- Add a helper to find the closest ONFI mode
- bcm63xx MTD parsers: simplify CFE detection
Raw NAND controller drivers changes:
- fsl-upm: Deprecation of specific DT properties
- fsl_upm: Driver rework and cleanup in favor of ->exec_op()
- Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
- brcmnand: ECC error handling on EDU transfers
- brcmnand: Don't default to EDU transfers
- qcom: Set BAM mode only if not set already
- qcom: Avoid write to unavailable register
- gpio: Driver rework in favor of ->exec_op()
- tango: ->exec_op() conversion
- mtk: ->exec_op() conversion
Raw NAND chip drivers changes:
- toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
- toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
- toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
- hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
HyperBus changes:
- DMA support for TI's AM654 HyperBus controller driver.
- HyperBus frontend driver for Renesas RPC-IF driver.
SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d
SPI NOR controller drivers changes:
- intel-spi Add Alder Lake-S PCI ID
MTD Core changes:
- mtdoops: Don't run panic write twice
- mtdconcat: Correctly handle panic write
- Use DEFINE_SHOW_ATTRIBUTE"
* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
mtd: hyperbus: add Renesas RPC-IF driver
Revert "mtd: spi-nor: Prefer asynchronous probe"
mtd: parsers: bcm63xx: Do not make it modular
mtd: spear_smi: Enable compile testing
mtd: maps: vmu-flash: fix typos for struct memcard
mtd: physmap: Add Baikal-T1 physically mapped ROM support
mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
mtd: rawnand: cadence: remove a redundant dev_err call
mtd: rawnand: ams-delta: Fix non-OF build warning
mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
mtd: rawnand: atmel: Check return values for nand_read_data_op
mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
mtd: rawnand: qcom: Simplify with dev_err_probe()
mtd: rawnand: marvell: Fix and update kerneldoc
mtd: rawnand: marvell: Simplify with dev_err_probe()
mtd: rawnand: gpmi: Simplify with dev_err_probe()
mtd: rawnand: atmel: Simplify with dev_err_probe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Fix Kconfig typo "acces" -> "access" (Colin Ian King)
- Use dev_error_probe() to simplify the error handling on imx and imx8
platforms (Anson Huang)
- Use dedicated kobj_to_dev() instead of container_of() in the sysfs
core code (Tian Tao)
- Fix coding style by adding braces to a one line conditional statement
on rcar (Geert Uytterhoeven)
- Add DT binding documentation for the r8a774e1 platform and update the
Kconfig description supporting RZ/G2 SoCs (Lad Prabhakar)
- Simplify the return expression of stm_thermal_prepare on the stm32
platform (Qinglang Miao)
- Fix the unit in the function documentation for the idle injection
cooling device (Zhuguang Qing)
- Remove an unecessary mutex_init() in the core code (Qinglang Miao)
- Add support for keep alive events in the core code and the specific
int340x (Srinivas Pandruvada)
- Remove unused thermal zone variable in devfreq and cpufreq cooling
devices (Zhuguang Qing)
- Add the A100's THS controller support (Yangtao Li)
- Add power management on the omap3's bandgap sensor (Adam Ford)
- Fix a missing nlmsg_free in the netlink core error path (Jing
Xiangfeng)
* tag 'thermal-v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: core: Adding missing nlmsg_free() in thermal_genl_sampling_temp()
thermal: ti-soc-thermal: Enable addition power management
thermal: sun8i: Add A100's THS controller support
thermal: sun8i: add TEMP_CALIB_MASK for calibration data in sun50i_h6_ths_calibrate
dt-bindings: thermal: sun8i: Add binding for A100's THS controller
thermal: cooling: Remove unused variable *tz
thermal: int340x: Add keep alive response method
thermal: core: Add new event for sending keep alive notifications
thermal: int340x: Provide notification for OEM variable change
thermal: core: remove unnecessary mutex_init()
thermal/idle_inject: Fix comment of idle_duration_us and name of latency_ns
thermal: Kconfig: Update description for RCAR_GEN3_THERMAL config
thermal: stm32: simplify the return expression of stm_thermal_prepare()
dt-bindings: thermal: rcar-gen3-thermal: Add r8a774e1 support
thermal: rcar_thermal: Add missing braces to conditional statement
thermal: Use kobj_to_dev() instead of container_of()
thermal: imx8mm: Use dev_err_probe() to simplify error handling
thermal: imx: Use dev_err_probe() to simplify error handling
drivers: thermal: Kconfig: fix spelling mistake "acces" -> "access"
|
|
__io_queue_proc() is used by both, poll reqs and apoll. Don't use
req->poll.events to copy poll mask because for apoll it aliases with
private data of the request.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Make sure the async io-wq workers inherit the loginuid and sessionid from
the original task, and restore them to unset once we're done with the
async work item.
While at it, disable the ability for kernel threads to write to their own
loginuid.
Signed-off-by: Jens Axboe <[email protected]>
|
|
Even though we place the req_issued and req_complete in separate
cachelines, there's considerable overhead in doing the atomics
particularly on the completion side.
Get rid of having the two counters, and just use a percpu_counter for
this. That's what it was made for, after all. This considerably
reduces the overhead in __io_free_req().
Signed-off-by: Jens Axboe <[email protected]>
|
|
This avoids doing a copy for each new async IO, if some parts of the
io_identity has changed. We avoid reference counting for the normal
fast path of nothing ever changing.
Signed-off-by: Jens Axboe <[email protected]>
|
|
This is, by definition, a per-task structure. So store it in the
task context, instead of doing carrying it in each io_kiocb. We're being
a bit inefficient if members have changed, as that requires an alloc and
copy of a new io_identity struct. The next patch will fix that up.
Signed-off-by: Jens Axboe <[email protected]>
|
|
If the io_identity doesn't completely match the task, then create a
copy of it and use that. The existing copy remains valid until the last
user of it has gone away.
This also changes the personality lookup to be indexed by io_identity,
instead of creds directly.
Signed-off-by: Jens Axboe <[email protected]>
|
|
io-wq contains a pointer to the identity, which we just hold in io_kiocb
for now. This is in preparation for putting this outside io_kiocb. The
only exception is struct files_struct, which we'll need different rules
for to avoid a circular dependency.
No functional changes in this patch.
Signed-off-by: Jens Axboe <[email protected]>
|
|
We solely rely on work->work_flags now, so use that for proper checking
and clearing/dropping of various identity items.
Signed-off-by: Jens Axboe <[email protected]>
|
|
We have a number of bits that decide what context to inherit. Set up
io-wq flags for these instead. This is in preparation for always having
the various members set, but not always needing them for all requests.
No intended functional changes in this patch.
Signed-off-by: Jens Axboe <[email protected]>
|
|
There was an assumption that kthread_create_on_node() would properly set
NUMA affinities in terms of CPUs allowed, but it doesn't. Make sure we
do this when creating an io-wq context on NUMA.
Cc: [email protected]
Stefan Metzmacher <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
syzbot reports the following crash:
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 8927 Comm: syz-executor.3 Not tainted 5.9.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline]
RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline]
RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline]
RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553
Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c
RSP: 0018:ffffc90009137d68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000
RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005
RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37
R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000
FS: 00007f4266f3c700(0000) GS:ffff8880ae500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000118c000 CR3: 000000008e57d000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45de59
Code: 0d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4266f3bc78 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab
RAX: ffffffffffffffda RBX: 00000000000083c0 RCX: 000000000045de59
RDX: 0000000020000280 RSI: 0000000000000002 RDI: 0000000000000005
RBP: 000000000118bf68 R08: 0000000000000000 R09: 0000000000000000
R10: 40000000000000a1 R11: 0000000000000246 R12: 000000000118bf2c
R13: 00007fff2fa4f12f R14: 00007f4266f3c9c0 R15: 000000000118bf2c
Modules linked in:
---[ end trace 2a40a195e2d5e6e6 ]---
RIP: 0010:io_file_from_index fs/io_uring.c:5963 [inline]
RIP: 0010:io_sqe_files_register fs/io_uring.c:7369 [inline]
RIP: 0010:__io_uring_register fs/io_uring.c:9463 [inline]
RIP: 0010:__do_sys_io_uring_register+0x2fd2/0x3ee0 fs/io_uring.c:9553
Code: ec 03 49 c1 ee 03 49 01 ec 49 01 ee e8 57 61 9c ff 41 80 3c 24 00 0f 85 9b 09 00 00 4d 8b af b8 01 00 00 4c 89 e8 48 c1 e8 03 <80> 3c 28 00 0f 85 76 09 00 00 49 8b 55 00 89 d8 c1 f8 09 48 98 4c
RSP: 0018:ffffc90009137d68 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc9000ef2a000
RDX: 0000000000040000 RSI: ffffffff81d81dd9 RDI: 0000000000000005
RBP: dffffc0000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffed1012882a37
R13: 0000000000000000 R14: ffffed1012882a38 R15: ffff888094415000
FS: 00007f4266f3c700(0000) GS:ffff8880ae400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000074a918 CR3: 000000008e57d000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
which is a copy of fget failure condition jumping to cleanup, but the
cleanup requires ctx->file_data to be assigned. Assign it when setup,
and ensure that we clear it again for the error path exit.
Fixes: 5398ae698525 ("io_uring: clean file_data access in files_register")
Reported-by: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
This reverts commit 738277adc81929b3e7c9b63fec6693868cc5f931.
This change didn't make a lot of sense, and as Linus reports, it actually
fails on clang:
/tmp/io_uring-dd40c4.s:26476: Warning: ignoring changed section
attributes for .data..read_mostly
The arrays are already marked const so, by definition, they are not
just read-mostly, they are read-only.
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
REQ_F_COMP_LOCKED is used and implemented in a buggy way. The problem is
that the flag is set before io_put_req() but not cleared after, and if
that wasn't the final reference, the request will be freed with the flag
set from some other context, which may not hold a spinlock. That means
possible races with removing linked timeouts and unsynchronised
completion (e.g. access to CQ).
Instead of fixing REQ_F_COMP_LOCKED, kill the flag and use
task_work_add() to move such requests to a fresh context to free from
it, as was done with __io_free_req_finish().
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
io_req_clean_work() checks REQ_F_COMP_LOCK to pass this two layers up.
Move the check up into __io_free_req(), so at least it doesn't looks so
ugly and would facilitate further changes.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Move io_put_req() in io_poll_task_handler() from under spinlock. This
eliminates the need to use REQ_F_COMP_LOCKED, at the expense of
potentially having to grab the lock again. That's still a better trade
off than relying on the locked flag.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
If a request had REQ_F_LINK_TIMEOUT it would've been cleared in
__io_kill_linked_timeout() by the time of __io_fail_links(), so no need
to care about it.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
__io_kill_linked_timeout() sets REQ_F_COMP_LOCKED for a linked timeout
even if it can't cancel it, e.g. it's already running. It not only races
with io_link_timeout_fn() for ->flags field, but also leaves the flag
set and so io_link_timeout_fn() may find it and decide that it holds the
lock. Hopefully, the second problem is potential.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
An incorrect sizeof() is being used, sizeof(file_data->table) is not
correct, it should be sizeof(*file_data->table).
Fixes: 5398ae698525 ("io_uring: clean file_data access in files_register")
Signed-off-by: Colin Ian King <[email protected]>
Addresses-Coverity: ("Sizeof not portable (SIZEOF_MISMATCH)")
Signed-off-by: Jens Axboe <[email protected]>
|
|
If the txdone is done by polling, it is possible for msg_submit() to start
the timer while txdone_hrtimer() callback is running. If the timer needs
recheduling, it could already be enqueued by the time hrtimer_forward_now()
is called, leading hrtimer to loudly complain.
WARNING: CPU: 3 PID: 74 at kernel/time/hrtimer.c:932 hrtimer_forward+0xc4/0x110
CPU: 3 PID: 74 Comm: kworker/u8:1 Not tainted 5.9.0-rc2-00236-gd3520067d01c-dirty #5
Hardware name: Libre Computer AML-S805X-AC (DT)
Workqueue: events_freezable_power_ thermal_zone_device_check
pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
pc : hrtimer_forward+0xc4/0x110
lr : txdone_hrtimer+0xf8/0x118
[...]
This can be fixed by not starting the timer from the callback path. Which
requires the timer reloading as long as any message is queued on the
channel, and not just when current tx is not done yet.
Fixes: 0cc67945ea59 ("mailbox: switch to hrtimer for tx_complete polling")
Reported-by: Da Xue <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Tested-by: Sudeep Holla <[email protected]>
Acked-by: Jerome Brunet <[email protected]>
Tested-by: Jerome Brunet <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>
|
|
Pavel Machek complained that the question about supporting deprecated
XFS v4 comes up even when XFS is disabled. This clearly makes no sense,
so fix Kconfig.
Reported-by: Pavel Machek <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Eric Sandeen <[email protected]>
|
|
Fix some off-by-one errors in xfs_rtalloc_query_range. The highest key
in the realtime bitmap is always one less than the number of rt extents,
which means that the key clamp at the start of the function is wrong.
The 4th argument to xfs_rtfind_forw is the highest rt extent that we
want to probe, which means that passing 1 less than the high key is
wrong. Finally, drop the rem variable that controls the loop because we
can compare the iteration point (rtstart) against the high key directly.
The sordid history of this function is that the original commit (fb3c3)
incorrectly passed (high_rec->ar_startblock - 1) as the 'limit' parameter
to xfs_rtfind_forw. This was wrong because the "high key" is supposed
to be the largest key for which the caller wants result rows, not the
key for the first row that could possibly be outside the range that the
caller wants to see.
A subsequent attempt (8ad56) to strengthen the parameter checking added
incorrect clamping of the parameters to the number of rt blocks in the
system (despite the bitmap functions all taking units of rt extents) to
avoid querying ranges past the end of rt bitmap file but failed to fix
the incorrect _rtfind_forw parameter. The original _rtfind_forw
parameter error then survived the conversion of the startblock and
blockcount fields to rt extents (a0e5c), and the most recent off-by-one
fix (a3a37) thought it was patching a problem when the end of the rt
volume is not in use, but none of these fixes actually solved the
original problem that the author was confused about the "limit" argument
to xfs_rtfind_forw.
Sadly, all four of these patches were written by this author and even
his own usage of this function and rt testing were inadequate to get
this fixed quickly.
Original-problem: fb3c3de2f65c ("xfs: add a couple of queries to iterate free extents in the rtbitmap")
Not-fixed-by: 8ad560d2565e ("xfs: strengthen rtalloc query range checks")
Not-fixed-by: a0e5c435babd ("xfs: fix xfs_rtalloc_rec units")
Fixes: a3a374bf1889 ("xfs: fix off-by-one error in xfs_rtalloc_query_range")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Improve performance for certain container setups by introducing a
"volatile" mode
- ioctl improvements
- continue preparation for unprivileged overlay mounts
* tag 'ovl-update-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: use generic vfs_ioc_setflags_prepare() helper
ovl: support [S|G]ETFLAGS and FS[S|G]ETXATTR ioctls for directories
ovl: rearrange ovl_can_list()
ovl: enumerate private xattrs
ovl: pass ovl_fs down to functions accessing private xattrs
ovl: drop flags argument from ovl_do_setxattr()
ovl: adhere to the vfs_ vs. ovl_do_ conventions for xattrs
ovl: use ovl_do_getxattr() for private xattr
ovl: fold ovl_getxattr() into ovl_get_redirect_xattr()
ovl: clean up ovl_getxattr() in copy_up.c
duplicate ovl_getxattr()
ovl: provide a mount option "volatile"
ovl: check for incompatible features in work dir
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"A collection of fixes to fix afs_cell struct refcounting, thereby
fixing a slew of related syzbot bugs:
- Fix the cell tree in the netns to use an rwsem rather than RCU.
There seem to be some problems deriving from the use of RCU and a
seqlock to walk the rbtree, but it's not entirely clear what since
there are several different failures being seen.
Changing things to use an rwsem instead makes it more robust. The
extra performance derived from using RCU isn't necessary in this
case since the only time we're looking up a cell is during mount or
when cells are being manually added.
- Fix the refcounting by splitting the usage counter into a memory
refcount and an active users counter. The usage counter was doing
double duty, keeping track of whether a cell is still in use and
keeping track of when it needs to be destroyed - but this makes the
clean up tricky. Separating these out simplifies the logic.
- Fix purging a cell that has an alias. A cell alias pins the cell
it's an alias of, but the alias is always later in the list. Trying
to purge in a single pass causes rmmod to hang in such a case.
- Fix cell removal. If a cell's manager is requeued whilst it's
removing itself, the manager will run again and re-remove itself,
causing problems in various places. Follow Hillf Danton's
suggestion to insert a more terminal state that causes the manager
to do nothing post-removal.
In additional to the above, two other changes:
- Add a tracepoint for the cell refcount and active users count. This
helped with debugging the above and may be useful again in future.
- Downgrade an assertion to a print when a still-active server is
seen during purging. This was happening as a consequence of
incomplete cell removal before the servers were cleaned up"
* tag 'afs-fixes-20201016' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Don't assert on unpurgeable server records
afs: Add tracing for cell refcount and active user count
afs: Fix cell removal
afs: Fix cell purging with aliases
afs: Fix cell refcounting by splitting the usage counter
afs: Fix rapid cell addition/removal by not using RCU on cells tree
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've added new features such as zone capacity for ZNS
and a new GC policy, ATGC, along with in-memory segment management. In
addition, we could improve the decompression speed significantly by
changing virtual mapping method. Even though we've fixed lots of small
bugs in compression support, I feel that it becomes more stable so
that I could give it a try in production.
Enhancements:
- suport zone capacity in NVMe Zoned Namespace devices
- introduce in-memory current segment management
- add standart casefolding support
- support age threshold based garbage collection
- improve decompression speed by changing virtual mapping method
Bug fixes:
- fix condition checks in some ioctl() such as compression, move_range, etc
- fix 32/64bits support in data structures
- fix memory allocation in zstd decompress
- add some boundary checks to avoid kernel panic on corrupted image
- fix disallowing compression for non-empty file
- fix slab leakage of compressed block writes
In addition, it includes code refactoring for better readability and
minor bug fixes for compression and zoned device support"
* tag 'f2fs-for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (51 commits)
f2fs: code cleanup by removing unnecessary check
f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
f2fs: fix writecount false positive in releasing compress blocks
f2fs: introduce check_swap_activate_fast()
f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case
f2fs: handle errors of f2fs_get_meta_page_nofail
f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode
f2fs: reject CASEFOLD inode flag without casefold feature
f2fs: fix memory alignment to support 32bit
f2fs: fix slab leak of rpages pointer
f2fs: compress: fix to disallow enabling compress on non-empty file
f2fs: compress: introduce cic/dic slab cache
f2fs: compress: introduce page array slab cache
f2fs: fix to do sanity check on segment/section count
f2fs: fix to check segment boundary during SIT page readahead
f2fs: fix uninit-value in f2fs_lookup
f2fs: remove unneeded parameter in find_in_block()
f2fs: fix wrong total_sections check and fsmeta check
f2fs: remove duplicated code in sanity_check_area_boundary
f2fs: remove unused check on version_bitmap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull documentation updates from Mauro Carvalho Chehab:
"A series of patches addressing warnings produced by make htmldocs.
This includes:
- kernel-doc markup fixes
- ReST fixes
- Updates at the build system in order to support newer versions of
the docs build toolchain (Sphinx)
After this series, the number of html build warnings should reduce
significantly, and building with Sphinx 3.1 or later should now be
supported (although it is still recommended to use Sphinx 2.4.4).
As agreed with Jon, I should be sending you a late pull request by the
end of the merge window addressing remaining issues with docs build,
as there are a number of warning fixes that depends on pull requests
that should be happening along the merge window.
The end goal is to have a clean htmldocs build on Kernel 5.10.
PS. It should be noticed that Sphinx 3.0 is not currently supported,
as it lacks support for C domain namespaces. Such feature, needed in
order to document uAPI system calls with Sphinx 3.x, was added only on
Sphinx 3.1"
* tag 'docs/v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (75 commits)
PM / devfreq: remove a duplicated kernel-doc markup
mm/doc: fix a literal block markup
workqueue: fix a kernel-doc warning
docs: virt: user_mode_linux_howto_v2.rst: fix a literal block markup
Input: sparse-keymap: add a description for @sw
rcu/tree: docs: document bkvcache new members at struct kfree_rcu_cpu
nl80211: docs: add a description for s1g_cap parameter
usb: docs: document altmode register/unregister functions
kunit: test.h: fix a bad kernel-doc markup
drivers: core: fix kernel-doc markup for dev_err_probe()
docs: bio: fix a kerneldoc markup
kunit: test.h: solve kernel-doc warnings
block: bio: fix a warning at the kernel-doc markups
docs: powerpc: syscall64-abi.rst: fix a malformed table
drivers: net: hamradio: fix document location
net: appletalk: Kconfig: Fix docs location
dt-bindings: fix references to files converted to yaml
memblock: get rid of a :c:type leftover
math64.h: kernel-docs: Convert some markups into normal comments
media: uAPI: buffer.rst: remove a left-over documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix mismatch section of adding early trace events.
Fixes the issue of a mismatch section that was missed due to gcc
inlining the offending function, while clang did not (and reported the
issue)"
* tag 'trace-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove __init from __trace_early_add_new_event()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"Prevent overflow in the new lockless ringbuffer"
* tag 'printk-for-5.10-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: ringbuffer: Wrong data pointer when appending small string
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A fairly modest set of changes for this cycle.
Of particular note are an earlycon fix from Doug Anderson and my own
changes to get kgdb/kdb to honour the kprobe blocklist. The later
creates a safety rail that strongly encourages developers not to place
breakpoints in, for example, arch specific trap handling code.
Also included are a couple of small fixes and tweaks: an API update,
eliminate a coverity dead code warning, improved handling of search
during multi-line printk and a couple of typo corrections"
* tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Fix pager search for multi-line strings
kernel: debug: Centralize dbg_[de]activate_sw_breakpoints
kgdb: Add NOKPROBE labels on the trap handler functions
kgdb: Honour the kprobe blocklist when setting breakpoints
kernel/debug: Fix spelling mistake in debug_core.c
kdb: Use newer api for tasklist scanning
kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"
kdb: remove unnecessary null check of dbg_io_ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use
of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
MIPS: DEC: Restore bootmem reservation for firmware working memory area
MIPS: dec: fix section mismatch
bcm963xx_tag.h: fix duplicated word
mips: ralink: enable zboot support
MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
MIPS: cpu-probe: introduce exclusive R3k CPU probe
MIPS: cpu-probe: move fpu probing/handling into its own file
MIPS: replace add_memory_region with memblock
MIPS: Loongson64: Clean up numa.c
MIPS: Loongson64: Select SMP in Kconfig to avoid build error
mips: octeon: Add Ubiquiti E200 and E220 boards
MIPS: SGI-IP28: disable use of ll/sc in kernel
MIPS: tx49xx: move tx4939_add_memory_regions into only user
MIPS: pgtable: Remove used PAGE_USERIO define
MIPS: alchemy: Share prom_init implementation
MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
MIPS: process: include exec.h header in process.c
MIPS: process: Add prototype for function arch_dup_task_struct
MIPS: idle: Add prototype for function check_wait
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove address space overrides using set_fs()
- Convert to generic vDSO
- Convert to generic page table dumper
- Add ARCH_HAS_DEBUG_WX support
- Add leap seconds handling support
- Add NVMe firmware-assisted kernel dump support
- Extend NVMe boot support with memory clearing control and addition of
kernel parameters
- AP bus and zcrypt api code rework. Add adapter configure/deconfigure
interface. Extend debug features. Add failure injection support
- Add ECC secure private keys support
- Add KASan support for running protected virtualization host with
4-level paging
- Utilize destroy page ultravisor call to speed up secure guests
shutdown
- Implement ioremap_wc() and ioremap_prot() with MIO in PCI code
- Various checksum improvements
- Other small various fixes and improvements all over the code
* tag 's390-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (85 commits)
s390/uaccess: fix indentation
s390/uaccess: add default cases for __put_user_fn()/__get_user_fn()
s390/zcrypt: fix wrong format specifications
s390/kprobes: move insn_page to text segment
s390/sie: fix typo in SIGP code description
s390/lib: fix kernel doc for memcmp()
s390/zcrypt: Introduce Failure Injection feature
s390/zcrypt: move ap_msg param one level up the call chain
s390/ap/zcrypt: revisit ap and zcrypt error handling
s390/ap: Support AP card SCLP config and deconfig operations
s390/sclp: Add support for SCLP AP adapter config/deconfig
s390/ap: add card/queue deconfig state
s390/ap: add error response code field for ap queue devices
s390/ap: split ap queue state machine state from device state
s390/zcrypt: New config switch CONFIG_ZCRYPT_DEBUG
s390/zcrypt: introduce msg tracking in zcrypt functions
s390/startup: correct early pgm check info formatting
s390: remove orphaned extern variables declarations
s390/kasan: make sure int handler always run with DAT on
s390/ipl: add support to control memory clearing for nvme re-IPL
...
|
|
A build condition was missing around a compilation test, this compilation
test comes from the original test_bitfield code.
And removed unnecessary code for this test.
Fixes: d2585f5164c2 ("lib: kunit: add bitfield test conversion to KUnit")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Vitor Massaru Iha <[email protected]>
Link: https://lore.kernel.org/linux-next/[email protected]/
Reviewed-by: Brendan Higgins <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A series from Nick adding ARCH_WANT_IRQS_OFF_ACTIVATE_MM & selecting
it for powerpc, as well as a related fix for sparc.
- Remove support for PowerPC 601.
- Some fixes for watchpoints & addition of a new ptrace flag for
detecting ISA v3.1 (Power10) watchpoint features.
- A fix for kernels using 4K pages and the hash MMU on bare metal
Power9 systems with > 16TB of RAM, or RAM on the 2nd node.
- A basic idle driver for shallow stop states on Power10.
- Tweaks to our sched domains code to better inform the scheduler about
the hardware topology on Power9/10, where two SMT4 cores can be
presented by firmware as an SMT8 core.
- A series doing further reworks & cleanups of our EEH code.
- Addition of a filter for RTAS (firmware) calls done via sys_rtas(),
to prevent root from overwriting kernel memory.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V,
Athira Rajeev, Biwen Li, Cameron Berkenpas, Cédric Le Goater, Christophe
Leroy, Christoph Hellwig, Colin Ian King, Daniel Axtens, David Dai, Finn
Thain, Frederic Barrat, Gautham R. Shenoy, Greg Kurz, Gustavo Romero,
Ira Weiny, Jason Yan, Joel Stanley, Jordan Niethe, Kajol Jain, Konrad
Rzeszutek Wilk, Laurent Dufour, Leonardo Bras, Liu Shixin, Luca
Ceresoli, Madhavan Srinivasan, Mahesh Salgaonkar, Nathan Lynch, Nicholas
Mc Guire, Nicholas Piggin, Nick Desaulniers, Oliver O'Halloran, Pedro
Miraglia Franco de Carvalho, Pratik Rajesh Sampat, Qian Cai, Qinglang
Miao, Ravi Bangoria, Russell Currey, Satheesh Rajendran, Scott Cheloha,
Segher Boessenkool, Srikar Dronamraju, Stan Johnson, Stephen Kitt,
Stephen Rothwell, Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain,
Vaidyanathan Srinivasan, Vasant Hegde, Wang Wensheng, Wolfram Sang, Yang
Yingliang, zhengbin.
* tag 'powerpc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (228 commits)
Revert "powerpc/pci: unmap legacy INTx interrupts when a PHB is removed"
selftests/powerpc: Fix eeh-basic.sh exit codes
cpufreq: powernv: Fix frame-size-overflow in powernv_cpufreq_reboot_notifier
powerpc/time: Make get_tb() common to PPC32 and PPC64
powerpc/time: Make get_tbl() common to PPC32 and PPC64
powerpc/time: Remove get_tbu()
powerpc/time: Avoid using get_tbl() and get_tbu() internally
powerpc/time: Make mftb() common to PPC32 and PPC64
powerpc/time: Rename mftbl() to mftb()
powerpc/32s: Remove #ifdef CONFIG_PPC_BOOK3S_32 in head_book3s_32.S
powerpc/32s: Rename head_32.S to head_book3s_32.S
powerpc/32s: Setup the early hash table at all time.
powerpc/time: Remove ifdef in get_dec() and set_dec()
powerpc: Remove get_tb_or_rtc()
powerpc: Remove __USE_RTC()
powerpc: Tidy up a bit after removal of PowerPC 601.
powerpc: Remove support for PowerPC 601
powerpc: Remove PowerPC 601
powerpc: Drop SYNC_601() ISYNC_601() and SYNC()
powerpc: Remove CONFIG_PPC601_SYNC_FIX
...
|
|
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.
Fixes: e248aa7be86 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
Because every path through nfs4_find_file()'s
switch does an explicit return, the break is not needed.
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
Fix returning value for sysctl sunrpc.transports.
Return error code from sysctl proc_handler function proc_do_xprt instead of number of the written bytes.
Otherwise sysctl returns random garbage for this key.
Since v1:
- Handle negative returned value from memory_read_from_buffer as an error
Signed-off-by: Artur Molchanov <[email protected]>
Cc: [email protected]
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <[email protected]>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
|
|
To test fault-tolerance of user memory access functions, introduce fault
injection to usercopy functions.
If a failure is expected return either -EFAULT or the total amount of
bytes that were not copied.
Signed-off-by: Albert van der Linde <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Akinobu Mita <[email protected]>
Reviewed-by: Alexander Potapenko <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "add fault injection to user memory access", v3.
The goal of this series is to improve testing of fault-tolerance in usages
of user memory access functions, by adding support for fault injection.
syzkaller/syzbot are using the existing fault injection modes and will use
this particular feature also.
The first patch adds failure injection capability for usercopy functions.
The second changes usercopy functions to use this new failure capability
(copy_from_user, ...). The third patch adds get/put/clear_user failures
to x86.
This patch (of 3):
Add a failure injection capability to improve testing of fault-tolerance
in usages of user memory access functions.
Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy
functions. The should_fail_usercopy function is to be called by these
functions (copy_from_user, get_user, ...) in order to fail or not.
Signed-off-by: Albert van der Linde <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Akinobu Mita <[email protected]>
Reviewed-by: Alexander Potapenko <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Peter Zijlstra (Intel) <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andrey Konovalov <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When use 'stat' tool to display file status, the 'Blocks' field always in
'0', this is not good for tool 'du'(e.g.: busybox 'du'), it always output
'0' size for the files under ROMFS since such tool calculates number of
512B Blocks.
This patch calculates approx. number of 512B blocks based on inode size.
Signed-off-by: Libing Zhou <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: David Howells <[email protected]>
Cc: Al Viro <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When the kernel is compiled with Clang, -fsanitize=bounds expands to
-fsanitize=array-bounds and -fsanitize=local-bounds.
Enabling -fsanitize=local-bounds with Clang has the unfortunate
side-effect of inserting traps; this goes back to its original intent,
which was as a hardening and not a debugging feature [1]. The same
feature made its way into -fsanitize=bounds, but the traps remained. For
that reason, -fsanitize=bounds was split into 'array-bounds' and
'local-bounds' [2].
Since 'local-bounds' doesn't behave like a normal sanitizer, enable it
with Clang only if trapping behaviour was requested by
CONFIG_UBSAN_TRAP=y.
Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the
'local-bounds' option by default when UBSAN_TRAP is enabled.
[1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html
[2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.html
Suggested-by: Marco Elver <[email protected]>
Signed-off-by: George Popescu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: David Brazdil <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Michal Marek <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
in_ubsan field of task_struct is only used in lib/ubsan.c, which in its
turn is used only `ifneq ($(CONFIG_UBSAN_TRAP),y)`.
Removing unnecessary field from a task_struct will help preserve the ABI
between vanilla and CONFIG_UBSAN_TRAP'ed kernels. In particular, this
will help enabling bounds sanitizer transparently for Android's GKI.
Signed-off-by: Elena Petrova <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Jann Horn <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|