aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-09drm/amd/display: Add a check-function for virtual signal typeNikola Cornij1-0/+5
[why] Same functions exist for all other signal types. [how] Add a function that checks against virtual signal type. Signed-off-by: Nikola Cornij <[email protected]> Reviewed-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/display: fix 4K stereo screen flash issueCharlene Liu1-0/+3
[Why] HDMI_scramber is not enabled for pixel rate >340Mhz. [How] Calculate the phy clock to include the Hw frame packing factor. Signed-off-by: Charlene Liu <[email protected]> Reviewed-by: Chris Park <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/display: Add DC build_id to determine build typeJun Lei2-0/+5
[why] Sometimes there are indications that the incorrect driver is being loaded in automated tests. This change adds the ability for builds to be tagged with a string, and picked up by the test infrastructure. [how] dc.c will allocate const for build id, which is init-ed with default value, indicating production build. For test builds, build server will find/replace this value. The test machine will then verify this value. Signed-off-by: Jun Lei <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Leo Li <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay: Enable/Disable NBPSTATE on On/OFF of UVDAkshu Agrawal1-1/+4
We observe black lines (underflow) on display when playing a 4K video with UVD. On Disabling Low memory P state this issue is not seen. Multiple runs of power measurement shows no imapct. Signed-off-by: Akshu Agrawal <[email protected]> Signed-off-by: Satyajit Sahu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-10-09drm/amd/pp: Remove wrong code in fiji_start_smuRex Zhu1-10/+0
HW CG feature will be enabled after hw ip initialized Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/pp: Remove uncessary extra vcn pg cntl in smuRex Zhu1-15/+1
the vcn power will be controlled by VCN. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu: Move out power up/down sdma out of smuRex Zhu3-15/+7
smu only expose interface to other ip blocks. in order to reduce dependence between smu and other ip blocks Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/pp: Expose the smu support for SDMA PG cntlRex Zhu3-0/+27
SDMA IP can be power up/down via smu message Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpmRex Zhu2-0/+2
The minRPM speed maybe equal to zero. so need to check input RPM not equal to 0, otherwise cause divide-by-zero driver crash. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/pp: Fix fan's RPM setting not work on VI/Vega10Rex Zhu2-4/+4
set the target rpm value to wrong register. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu: Fix comments error in sdma_v4_1_update_power_gatingRex Zhu1-1/+1
Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay: enable MGPU fan boost feature on Vega20Evan Quan1-0/+15
Added Vega20 specific implementation for MGPU fan boost feature. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay: helper interfaces for MGPU fan boost featureEvan Quan5-0/+66
MGPU fan boost feature is enabled only when two or more dGPUs in the system. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu: added AMD GPU instance counting V2Evan Quan3-0/+73
Count all GPU instances from AMD(including iGPUs and dGPUs) in the system. V2: drop unnecessary initialization for other gpu_info members except mutex Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu/vega20: make power profile output more consistentAlex Deucher1-1/+1
Make the profile name line match previous generations more closely. E.g., 0 3D_FULL_SCREEN : vs: 0(3D_FULL_SCREEN ) Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu: change Raven always on CUs to 4Evan Quan1-2/+6
For Vega10 and Vega20, the always on CUs are 12. For Raven, it's 4. Signed-off-by: Evan Quan <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amdgpu: added vega20 LBPW support v2Evan Quan1-1/+104
Enable LBPW support on vega20. v2: squash in warning fix (Alex) Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2Evan Quan5-4/+207
Manual fan RPM and pwm setting on vega20 are available now. V2: correct the register for fan speed setting and avoid divide-by-zero Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay/vega20: tell the correct gfx voltage V2Evan Quan3-0/+18
Export the correct gfx voltage by hwmon interface. V2: update the register naming for consistency Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-09drm/amd/powerplay/vega20: correct the hwmon interface ppt limit outputEvan Quan2-0/+14
The ppt limit read out by hwmon interface is always 0. Correct this hwmon interface output. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-10-04Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into ↵Dave Airlie7-73/+520
drm-next misc mali-dp updates. Signed-off-by: Dave Airlie <[email protected]> From: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-04Merge tag 'tilcdc-4.20' of https://github.com/jsarha/linux into drm-nextDave Airlie2-13/+4
drm/tilcdc changes for Linux v4.20 suspend/resume update. Signed-off-by: Dave Airlie <[email protected]> From: Jyri Sarha <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-04BackMerge v4.19-rc6 into drm-nextDave Airlie234-1256/+1707
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: Dave Airlie <[email protected]>
2018-10-04Merge tag 'exynos-drm-next-for-v4.20' of ↵Dave Airlie12-208/+249
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add out-bridge support - This patch series enables out-bridge for LVDS bridge device support, and also includes two cleanups and one relevant dt binding update for this. Add Samsung 16x16 tiled format support - This patch series adds Samsung 16x16 tiled format to scaler and gsc drivers. As for this, it adds Samsung specific format to drm_forcc.h header. For the git-pull request with relevant patches, I requested ack-by[1] to relevant maintainers but there was no any response. I'm pretty sure no problem to go to mainline though Exynos tree because the only user of it is Exynos. (airlied: this looked fine to me) [1] https://patchwork.freedesktop.org/patch/243921/ Add configurable plane alpha and pixel blend mode support - This patch series makes mixer driver to be configuragle for pixel blend mode and plane alpha, which also includes one fixup to set all default values correctly after reset. One cleanup - This patch replaces drm_atomic_helper_suspend/resume() with drm_mode_config_helper_suspend/resume() to remove exynos specific suspend_state. Signed-off-by: Dave Airlie <[email protected]> From: Inki Dae <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-04Merge tag 'omapdrm-4.20-2' of ↵Dave Airlie11-147/+210
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm fixes and cleanups for 4.20 - fix memory barrier bug in DMM driver - fix interrupt management in DMM driver - partial workaround for errata i878 - fix use of freed memory - some cleanups Signed-off-by: Dave Airlie <[email protected]> From: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-04Merge tag 'drm-misc-next-fixes-2018-10-03' of ↵Dave Airlie2-2/+51
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Add EXPERT config option to allow phys mem leak from fbdev for blob drivers (Neil) Cc: Neil Armstrong <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20181003195957.GA64584@art_vandelay
2018-10-04Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie30-1229/+1966
into drm-next Mostly code reorganizations and optimizations for vmwgfx. - Move TTM code that's only used by vmwgfx to vmwgfx - Break out the vmwgfx buffer- and resource validation code to a separate source file - Get rid of a number of atomic operations during command buffer validation. From: Thomas Hellstrom <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-03drm/fb_helper: Allow leaking fbdev smem_startNeil Armstrong2-2/+51
Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Cc: Noralf Trønnes <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Eric Anholt <[email protected]> Cc: Lucas Stach <[email protected]> Cc: Rob Clark <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Christian König <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Tested-by: Maxime Ripard <[email protected]> Acked-by: Daniel Vetter <[email protected]> Acked-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-10-02drm/arm/malidp: Implemented the size validation for AFBC framebuffersAyan Kumar Halder2-1/+132
AFBC buffers include additional metadata which increases the required allocation size. Implement the appropriate size validation and sanity checking for AFBC buffers. Added malidp specific function for framebuffer creation. This checks if the framebuffer has AFBC modifiers and if so, it verifies the necessary constraints on the size, alignment, offsets and pitch. Changes from v2: - Replaced DRM_ERROR() with DRM_DEBUG_KMS() in malidp_verify_afbc_framebuffer_caps() and malidp_verify_afbc_framebuffer_size() Signed-off-by: Ayan Kumar halder <[email protected]> Reviewed-by: Brian Starkey <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/arm/malidp: Validate rotations for compressed/uncompressed framebuffers ↵Liviu Dudau4-39/+54
for each layer Add support for compressed framebuffers that are described using the framebuffer's modifier field. Mali DP uses the rotation memory for the decompressor of the format, so we need to check for space when the modifiers are present. Signed-off-by: Ayan Kumar Halder <[email protected]> Reviewed-by: Brian Starkey <[email protected]> [re-worded commit, rebased, cleaned up duplicated checks for RGB888 and BGR888 and removed additional parameter for rotmem_required function hook] Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/malidp: Enable MMU prefetch on Mali-DP650Jamie Fox5-9/+296
Mali-DP650 supports warming up the SMMU translations, by sending requsts to the SMMU before a buffer is read. There are two modes supported: - PARTIAL: could be enabled when the buffer is composed of 4K or 64K pages, the display hardware will send a configurable number of requests before the actual reading. - FULL: could be enabled when the buffer is composed of 1M or 2M pages, the display hardware will send requests before reading for all pages composing the buffer. This patch adds a mechanism for detecting the page size and set the MMU prefetch mode if possible. Changes since v1: - For imported buffers use the already populated drm_gem_cma_object.sgt instead of calling driver.gem_prime_get_sg_table, which works just for buffers allocated through the gem_cma API. Signed-off-by: Jamie Fox <[email protected]> Signed-off-by: Alexandru Gheorghe <[email protected]> Acked-by: Liviu Dudau <[email protected]> [rebased and re-ordered functions] Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/mali-dp: Implement plane alpha and pixel blend on malidpLowry Li1-31/+44
Checks the pixel blending mode and plane alpha value when do the plane_check. Mali DP supports blending the current plane with the background either based on the pixel alpha blending mode or by using the layer's alpha value, but not both at the same time. If both case, plane_check will return failed. Sets the HW when doing plane_update accordingly. If plane alpha is the 0xffff, set the pixel blending bits accordingly. If not we'd set ALPHA bit as zero and layer alpha value. Changes since v1: - Introduces to use it in the malidp driver, which depends on the plane alpha patch Changes since v2: - Refines the comments of drm/mali-dp patchset Changes since v3: - Adds hardware limitation check Changes since v4: - Updates on drm/malidp, hardware limitation check only when the format has alpha pixel. - Rebases on drm-misc-next. Signed-off-by: Lowry Li <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/malidp: Fix smart layer when doing pm_suspend/resumeAlexandru Gheorghe1-7/+8
Smart layer enable rectangles is set to 1 when the driver is probed, however when doing pm_suspend the value is lost and it's not set again making the SMART_LAYER unusable, fix that by initializing the number of rectangles everytime we do a plane update. Signed-off-by: Alexandru Gheorghe <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/malidp: Fix writeback in NV12Alexandru Gheorghe4-7/+48
When we want to writeback to memory in NV12 format we need to program the RGB2YUV coefficients. Currently, we don't program the coefficients and NV12 doesn't work at all. This patchset fixes that by programming a sane default(bt709, limited range) as rgb2yuv coefficients. In the long run, probably we need to think of a way for userspace to be able to program that, but for now I think this is better than not working at all or not advertising NV12 as a supported format for memwrite. Changes since v1: - Write the rgb2yuv coefficients only once, since we don't change them at all, just write them the first time NV12 is programmed, suggested by Brian Starkey, here [1] [1] https://lists.freedesktop.org/archives/dri-devel/2018-August/186819.html Signed-off-by: Alexandru Gheorghe <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm: mali-dp: Call drm_crtc_vblank_reset on device initAlexandru Gheorghe1-0/+1
Currently, if userspace calls drm_wait_vblank before the crtc is activated the crtc vblank_enable hook is called, which in case of malidp driver triggers some warninngs. This happens because on device init we don't inform the drm core about the vblank state by calling drm_crtc_vblank_on/off/reset which together with drm_vblank_get have some magic that prevents calling drm_vblank_enable when crtc is off. Signed-off-by: Alexandru Gheorghe <[email protected]> Acked-by: Liviu Dudau <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-10-02drm/omap: fix use of freed memoryTomi Valkeinen1-1/+2
omap_connector_destroy() does: kfree(omap_connector); omapdss_device_put(omap_connector->output); omapdss_device_put(omap_connector->display); Fix this by moving the kfree after the omapdss_device_puts. This bug was introduced in 949ea2ef3fed4e1d0f9b80ec21ed81a9833ac248 Signed-off-by: Tomi Valkeinen <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]>
2018-10-02drm/omap: Replace drm_dev_unref with drm_dev_putThomas Zimmermann1-2/+2
This patch unifies the naming of DRM functions for reference counting of struct drm_device. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: Replace drm_gem_object_unreference_unlocked with put functionThomas Zimmermann4-5/+5
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: Replace drm_gem_object_{un/reference} with put,get functionsThomas Zimmermann1-1/+1
This patch unifies the naming of DRM functions for reference counting of struct drm_gem_object. The resulting code is more aligned with the rest of the Linux kernel interfaces. Signed-off-by: Thomas Zimmermann <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: Substitute format_is_yuv() with format->is_yuvAyan Kumar Halder1-16/+10
drm_format_info table has a field 'is_yuv' to denote if the format is yuv or not. The driver is expected to use this instead of having a function for the same purpose. Signed-off-by: Ayan Kumar halder <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: partial workaround for DRA7xx DMM errata i878Tomi Valkeinen2-2/+154
Errata i878 says that MPU should not be used to access RAM and DMM at the same time. As it's not possible to prevent MPU accessing RAM, we need to access DMM via a proxy. This patch changes DMM driver to access DMM registers via sDMA. Instead of doing a normal readl/writel call to read/write a register, we use sDMA to copy 4 bytes from/to the DMM registers. This patch provides only a partial workaround for i878, as not only DMM register reads/writes are affected, but also accesses to the DMM mapped buffers (framebuffers, usually). Signed-off-by: Tomi Valkeinen <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]>
2018-10-02drm/omap: dmm_tiler: Fix interrupt request/free sequence during probe/removePeter Ujfalusi1-20/+22
The interrupts should be enabled after the driver initialization to avoid early interrupts while the driver is not yet ready to handle them. On removal the interrupts must be disabled before other resources are released, freed up. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: dmm_tiler: No need to check if irq is valid in omap_dmm_removePeter Ujfalusi1-2/+1
The driver probe would fail if the irq is not available. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: fix memory barrier bug in DMM driverTomi Valkeinen1-0/+11
A DMM timeout "timed out waiting for done" has been observed on DRA7 devices. The timeout happens rarely, and only when the system is under heavy load. Debugging showed that the timeout can be made to happen much more frequently by optimizing the DMM driver, so that there's almost no code between writing the last DMM descriptors to RAM, and writing to DMM register which starts the DMM transaction. The current theory is that a wmb() does not properly ensure that the data written to RAM is observable by all the components in the system. This DMM timeout has caused interesting (and rare) bugs as the error handling was not functioning properly (the error handling has been fixed in previous commits): * If a DMM timeout happened when a GEM buffer was being pinned for display on the screen, a timeout error would be shown, but the driver would continue programming DSS HW with broken buffer, leading to SYNCLOST floods and possible crashes. * If a DMM timeout happened when other user (say, video decoder) was pinning a GEM buffer, a timeout would be shown but if the user handled the error properly, no other issues followed. * If a DMM timeout happened when a GEM buffer was being released, the driver does not even notice the error, leading to crashes or hang later. This patch adds wmb() and readl() calls after the last bit is written to RAM, which should ensure that the execution proceeds only after the data is actually in RAM, and thus observable by DMM. The read-back should not be needed. Further study is required to understand if DMM is somehow special case and read-back is ok, or if DRA7's memory barriers do not work correctly. Signed-off-by: Tomi Valkeinen <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]>
2018-10-02drm/omap: remove set but not used variable 'frame_height'YueHaibing1-6/+3
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/omapdrm/dss/dispc.c: In function 'dispc_ovl_setup_common': drivers/gpu/drm/omapdrm/dss/dispc.c:2627:19: warning: variable 'frame_height' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: Use ERR_CAST directly instead of ERR_PTR(PTR_ERR())zhong jiang1-1/+1
We prefer to use ERR_CAST to do so. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-02drm/omap: remove unused header tcm-sita.hCorentin Labbe1-93/+0
tcm-sita.h is unused since commit 0d6fa53fd805 ("drm/omap: Use bitmaps for TILER placement") Let's remove it. Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2018-10-01drm/tilcdc: Convert drm_atomic_helper_suspend/resume()Souptick Joarder2-13/+4
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). saved_state in tilcdc_drm_private will not be used anymore, so it can be removed. Signed-off-by: Ajit Negi <[email protected]> Signed-off-by: Souptick Joarder <[email protected]> Tested-by: Jyri Sarha <[email protected]> Signed-off-by: Jyri Sarha <[email protected]>
2018-10-01drm/exynos: mixer: Make plane alpha configurableChristoph Manszewski4-16/+30
The mixer hardware supports variable plane alpha. Currently planes are opaque, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-10-01drm/exynos: mixer: Make pixel blend mode configurableChristoph Manszewski3-6/+29
The mixer hardware supports both premultiplied alpha and non-premultiplied alpha. Currently premultiplied alpha is default, make this configurable. Tested on Odroid-U3 with Exynos 4412 CPU, kernel next-20180913 using modetest. Signed-off-by: Christoph Manszewski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.