aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-20ARM: dts: aspeed: witherspoon: Enable XDMA engineEddie James1-0/+11
Add a reserved memory node for the VGA memory. Add the XDMA engine node, enable it, and point it's memory region to the VGA memory. Signed-off-by: Eddie James <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2020-07-20ARM: dts: aspeed: ast2600: Update XDMA engine nodeEddie James1-12/+3
Add the PCI-E root complex reset, correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2020-07-20ARM: dts: aspeed: ast2500: Update XDMA engine nodeEddie James1-2/+3
Correct the pcie-device property, and add the Aspeed SCU interrupt controller include. Signed-off-by: Eddie James <[email protected]> Signed-off-by: Joel Stanley <[email protected]>
2020-07-20ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdogChris Healy1-0/+12
Add I2C child node for switch watchdog present on SPU3 Signed-off-by: Chris Healy <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd propertiesChris Healy1-0/+3
esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd" properties. esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property. Signed-off-by: Chris Healy <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20arm64: dts: lx2160a-rdb: fix shunt-resistor valueBiwen Li1-1/+1
Fix value of shunt-resistor property. The LX2160A-RDB has 500 uOhm shunt for the INA220, not 1000 uOhm. Unless it will get wrong power consumption(1/2) Signed-off-by: Biwen Li <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: imx6q-tbs2910: Pass reset-assert-usFabio Estevam1-1/+2
According to the AR8035 datasheet: "When using crystal, the clock is generated internally after power is stable. For a reliable power on reset, suggest to keep asserting the reset low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Soeren Moch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: imx6q-tbs2910: Add an mdio nodeFabio Estevam1-0/+11
imx6q-tbs2910 has an Atheros AR8035 Ethernet PHY at address 4. The AR8035 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. This fixes an Ethernet regression in U-Boot as U-Boot AR803X driver now expects the 'qca,clk-out-frequency' property to be passed via device tree. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Soeren Moch <[email protected]> Tested-by: Soeren Moch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: imx6qdl-sabresd: Pass reset-assert-usFabio Estevam1-1/+2
According to the AR8031 datasheet: "When using crystal, clock is generated internally after the power is stable. In order to get reliable power-on-reset, it is recommended to keep asserting the reset low signal long enough (10 ms) to ensure the clock is stable and clock-to-reset (1 ms) requirement is satisfied." Pass the 'reset-assert-us' property to describe such requirement. While at it, use the 'reset-gpios' property inside the the mdio node instead of the deprecated usage of 'phy-reset-gpios'. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Soeren Moch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: imx6qdl-sabresd: Add an mdio nodeFabio Estevam1-0/+11
imx6qdl-sabresd has an Atheros AR8031 Ethernet PHY at address 1. The AR8031 provides a 125MHz clock to the ENET_REF_CLK i.MX6 pin. Improve the Ethernet representation by adding an mdio node with such information. An advantage of adding the mdio node is that the AR8031 initialization code in the mx6sabresd board file in U-Boot can totally be removed. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Soeren Moch <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20dt-bindings: arm: fsl: Add MYiR Tech boardsParthiban Nallathambi1-0/+1
Add entries for MYiR Tech imx6ULL eval boards. Signed-off-by: Parthiban Nallathambi <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-20ARM: dts: imx6qdl-gw: add Gateworks System Controller supportTim Harvey14-57/+2076
Add Gateworks System Controller support to Gateworks Ventana boards: - add dt bindings for GSC mfd driver and hwmon driver for ADC's and fan controllers. - add dt bindings for gpio-keys driver for push-button and interrupt events Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-07-18arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulatorsNisha Kumari1-0/+12
This patch adds devicetree nodes for LAB and IBB regulators. Signed-off-by: Nisha Kumari <[email protected]> [sumits: Updated for better compatible strings and names] Signed-off-by: Sumit Semwal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-07-18ARM: dts: socfpga: add the temperature sensor to the Arria10 devkitDinh Nguyen1-0/+5
Add the Maxim max1619 temp sensor that is on the Arria10 devkit. Signed-off-by: Dinh Nguyen <[email protected]>
2020-07-18arm: dts: socfpga: add reset-names to spi nodeDinh Nguyen4-0/+8
Add reset-names = "spi" to spi dts nodes. Signed-off-by: Dinh Nguyen <[email protected]>
2020-07-18arm64: dts: agilex: add nand clocksDinh Nguyen1-0/+4
Add the clock properties for the NAND dts node. Signed-off-by: Dinh Nguyen <[email protected]>
2020-07-18arm64: dts: agilex: populate clock dts entries for Intel SoCFPGA AgilexDinh Nguyen2-0/+81
Add clock dts entries to the Intel SoCFPGA Agilex platform. Signed-off-by: Dinh Nguyen <[email protected]>
2020-07-18arm64: dts: marvell: add SMMU supportMarcin Wojtas3-0/+86
Add IOMMU node for Marvell AP806 based SoCs together with platform and PCI device Stream ID mapping. Signed-off-by: Marcin Wojtas <[email protected]> Signed-off-by: Tomasz Nowicki <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2020-07-18ARM: dts: dlink-dns327l: fix reg-init PHYDaniel González Cabanelas1-3/+2
The marvell PHY reg-init registers for the D-Link DNS-327L are wrong. Currently the first field is used to set the page 2, but this is pointless. The usage is not correct, and we are setting the wrong registers. Fix it. Signed-off-by: Daniel González Cabanelas <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2020-07-18ARM: dts: kirkwood: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2020-07-18ARM: dts: rockchip: Fix VBUS on rk3288-vyasaMichael Trimarchi1-2/+1
Connect the voltage regulator of vbus to the otg connector. Depending on the current mode this is enabled (in "host" mode") or disabled (in "peripheral" mode). The regulator must be updated if the controller is configured in "otg" mode and the status changes between "host" and "peripheral". Signed-off-by: Michael Trimarchi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki2-0/+18
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18ARM: dts: rockchip: Add VMARC RK3288 SOM initial supportJagan Teki1-0/+270
VMARC RK3288 SOM is a standard SMARC SOM design with Rockchip RK3288 SoC, which is designed by Vamrs. Specification: - Rockchip RK3288 - PMIC: RK808 - eMMC: 16GB/32GB/64GB - SD slot - 2xUSB-2.0, 1xUSB3.0 - USB-C for power supply - Ethernet - HDMI, MIPI-DSI/CSI, eDP Add initial support for VMARC RK3288 SOM, this would use with associated carrier board. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18dt-bindings: arm: rockchip: Add Rock Pi N8 bindingJagan Teki1-0/+6
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VMARC RK3288 SOM need to mount on top of dalang carrier board for making Rock PI N8 SBC. Add dt-bindings for it. Signed-off-by: Jagan Teki <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move common properties into CarrierJagan Teki3-20/+23
Some of gmac, sdmmc node properties are common across rk3288 and rk3399pro SOM's so move them into Carrier dtsi. Chosen node is specific to rk3399pro configure SBC, so move it into RockPI N10 dts. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move supply regulators into CarrierJagan Teki2-19/+19
Supply regulators are common across different variants of vmarc SOM's since the Type C power controller IC is part of the carrier board. So, move the supply regulators into carrier board dtsi. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, propertiesJagan Teki2-19/+18
Fix node, properties sorting on RockPI N10 board dts(i) files. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOMJagan Teki2-32/+29
I2C nodes and associated slave devices defined in Carrier board are specific to rk3399pro vmrac SOM. So, move them into SOM dtsi. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang5-0/+9
This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18arm64: dts: rockchip: Add 'arm,pl330-periph-burst' for dmacSugar Zhang5-0/+8
This patch Add the quirk to specify to use burst transfer for better compatible and higher performance. Signed-off-by: Sugar Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-18arm64: dts: rockchip: remove bus-width from mmc nodes in px30 dts filesJohan Jonker2-4/+0
'bus-width' has been added to px30.dtsi mmc nodes, so now it can be removed from the dts files that include it. Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2020-07-17arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domainsRajendra Nayak1-0/+49
Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Signed-off-by: Rajendra Nayak <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-07-17arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domainsRajendra Nayak1-0/+59
Add the OPP tables for DSI and MDP based on the perf state/clk requirements, and add the power-domains property to specify the scalable power domain. Tested-by: Rob Clark <[email protected]> Signed-off-by: Rajendra Nayak <[email protected]> Reviewed-by: Matthias Kaehlcke <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-07-17Merge tag 'tegra-for-5.9-arm64-dt' of ↵Arnd Bergmann19-1190/+2107
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt arm64: tegra: Device tree changes for v5.9-rc1 This contains a slew of fixes in preparation for validating device trees against json-schema bindings. In addition, this enables the CPU complex (for CPU frequency scaling) and GPU on Tegra194. * tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (56 commits) arm64: tegra: Add the GPU on Tegra194 arm64: tegra: Add compatible string for Tegra194 CPU complex arm64: tegra: Add HDMI supplies on Norrin arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210 arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C arm64: tegra: Add clocks and resets for ISP on Tegra210 arm64: tegra: Fix compatible string for DPAUX on Tegra210 arm64: tegra: Add i2c-bus subnode for DPAUX controllers arm64: tegra: Sort aliases alphabetically arm64: tegra: Remove spurious tabs arm64: tegra: Populate VBUS for USB3 on Jetson TX2 arm64: tegra: Enable DFLL support on Jetson Nano arm64: tegra: Add support for Jetson Xavier NX arm64: tegra: Re-order PCIe aperture mappings arm64: tegra: Enable Tegra VI CSI support for Jetson Nano arm64: tegra: jetson-tx1: Add camera supplies arm64: tegra: Fix order of XUSB controller clocks arm64: tegra: Rename cbb@0 to bus@0 on Tegra194 arm64: tegra: Sort nodes by unit-address on Jetson Nano arm64: tegra: Various fixes for PMICs ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17Merge tag 'tegra-for-5.9-arm-dt' of ↵Arnd Bergmann53-2195/+7251
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.9-rc1 This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab A500. In addition there are a slew of fixes to existing device trees in preparation for validating the DTBs against json-schema. * tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits) ARM: tegra: Add device-tree for ASUS Google Nexus 7 ARM: tegra: Add device-tree for Acer Iconia Tab A500 ARM: tegra: Add HDMI supplies on Nyan boards ARM: tegra: Add missing DSI controller on Tegra30 ARM: tegra: Add i2c-bus subnode for DPAUX controllers ARM: tegra: The Tegra30 SDHCI is not backwards-compatible ARM: tegra: The Tegra30 DC is not backwards-compatible ARM: tegra: Remove spurious comma from node name ARM: tegra: Add parent clock to DSI output ARM: tegra: Use standard names for SRAM nodes ARM: tegra: seaboard: Use standard battery bindings ARM: tegra: Use standard names for LED nodes ARM: tegra: Use numeric unit-addresses ARM: tegra: medcom-wide: Remove extra panel power supply ARM: tegra: Use proper unit-addresses for OPPs ARM: tegra: Add missing clock-names for SDHCI controllers ARM: tegra: Fix order of XUSB controller clocks ARM: tegra: Add #reset-cells to Tegra124 memory controller ARM: tegra: Add missing panel power supplies ARM: tegra: Add micro-USB A/B port on Jetson TK1 ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17Merge tag 'tegra-for-5.9-dt-bindings' of ↵Arnd Bergmann5-8/+61
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt dt-bindings: Changes for v5.9-rc1 This adds compatible strings for some new devices as well as updates and fixes existing bindings. * tag 'tegra-for-5.9-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: fuse: tegra: Add missing compatible strings dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and power-domains dt-bindings: Add documentation for GV11B GPU dt-bindings: ARM: tegra: Add ASUS Google Nexus 7 dt-bindings: ARM: tegra: Add Acer Iconia Tab A500 dt-bindings: Add vendor prefix for Acer Inc. dt-bindings: tegra: Document Jetson Xavier NX (and devkit) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17Merge tag 'amlogic-dt64' of ↵Arnd Bergmann6-20/+57
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt arm64: dts: amlogic updates for v5.9 - meson-gx: Switch to the meson-ee-pwrc bindings - add Khadas MCU nodes * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: amlogic: Add the Ethernet "timing-adjustment" clock arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings arm64: dts: meson-khadas-vim3: add Khadas MCU nodes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17Merge tag 'amlogic-dt' of ↵Arnd Bergmann6-0/+160
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.9 - power-domain and MMC updates * tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: odroidc1: enable the SDHC controller ARM: dts: meson8b: ec100: enable the SDHC controller ARM: dts: meson: add the SDHC MMC controller ARM: dts: meson8b: add power domain controller ARM: dts: meson8m2: add resets for the power domain controller ARM: dts: meson8: add power domain controller Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17arm64: tegra: Add the GPU on Tegra194Thierry Reding1-0/+34
The GPU found on NVIDIA Tegra194 SoCs is a Volta generation GPU called GV11B. Reviewed-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2020-07-17dt-bindings: fuse: tegra: Add missing compatible stringsThierry Reding1-2/+3
The Tegra FUSE device tree bindings haven't been updated in a while. Add compatible strings for the SoC generations that were released since the last update. Signed-off-by: Thierry Reding <[email protected]>
2020-07-17dt-bindings: i2c: tegra: Document Tegra210 VI I2C clocks and power-domainsSowjanya Komatineni1-6/+13
This patch documents missing clocks and power-domains of Tegra210 VI I2C. Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Sowjanya Komatineni <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2020-07-17dt-bindings: Add documentation for GV11B GPUThierry Reding1-0/+25
The GV11B's device tree bindings are the same as for GP10B, though the GPU is not completely compatible, so all that is needed is a different compatible string. Reviewed-by: Jon Hunter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2020-07-17Merge tag 'renesas-dt-bindings-for-v5.9-tag1' of ↵Arnd Bergmann3-0/+15
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas DT binding updates for v5.9 - Document core support for the RZ/G2H SoC, - Document support for the HopeRun HiHope RZ/G2H, and Beacon EmbeddedWorks RZ/G2M boards. * tag 'renesas-dt-bindings-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: arm: renesas: Document beacon-rzg2m dt-bindings: reset: renesas,rst: Document r8a774e1 reset module dt-bindings: power: renesas,rcar-sysc: Document r8a774e1 SYSC binding dt-bindings: arm: renesas: Add HopeRun RZ/G2H boards dt-bindings: arm: renesas: Document RZ/G2H SoC DT bindings Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17Merge tag 'renesas-arm-dt-for-v5.9-tag2' of ↵Arnd Bergmann54-119/+3342
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.9 (take two) - SPI Multi I/O Bus Controller (RPC-IF) support for R-Car V3H and V3M, including QSPI support for the Condor, Eagle, V3HSK, and V3MSK boards, - Initial support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, - Initial support for the Beacon EmbeddedWorks RZ/G2M board, - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits) ARM: dts: sh73a0: Add missing clocks to sound node arm64: dts: renesas: r8a774e1: Add CAN[FD] support arm64: dts: renesas: r8a774e1: Add RWDT node arm64: dts: renesas: r8a774e1: Add MSIOF nodes arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS support arm64: dts: renesas: r8a774e1: Add SDHI nodes arm64: dts: renesas: r8a774e1: Add SCIF and HSCIF nodes arm64: dts: renesas: r8a774e1: Add TMU device nodes arm64: dts: renesas: r8a774e1: Add CMT device nodes arm64: dts: renesas: r8a774e1: Add RZ/G2H thermal support arm64: dts: renesas: r8a774e1: Add operating points arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit arm64: dts: renesas: r8a774e1: Add Ethernet AVB node arm64: dts: renesas: r8a774e1: Add GPIO device nodes arm64: dts: renesas: r8a774e1: Add SYS-DMAC device nodes arm64: dts: renesas: r8a774e1: Add IPMMU device nodes ARM: dts: gose: Fix ports node name for adv7612 ARM: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: Fix SD Card/eMMC interface device node names arm64: dts: renesas: add full-pwr-cycle-in-suspend into eMMC nodes ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-07-17ARM: dts: sh73a0: Add missing clocks to sound nodeGeert Uytterhoeven1-0/+1
The device node for the FIFO-buffered Serial Interface sound node lacks the "clocks" property, as the DTS file didn't describe any clocks yet at its introduction. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-07-17arm64: dts: renesas: r8a774e1: Add CAN[FD] supportLad Prabhakar1-3/+53
Add CAN[01] and CANFD support to RZ/G2H (R8A774E1) SoC specific dtsi. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Link: https://lore.kernel.org/r/1594811350-14066-21-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-17arm64: dts: renesas: r8a774e1: Add RWDT nodeLad Prabhakar1-2/+6
Add a device node for the Watchdog Timer (RWDT) controller on the Renesas RZ/G2H (r8a774e1) SoC. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Link: https://lore.kernel.org/r/1594811350-14066-18-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-17arm64: dts: renesas: r8a774e1: Add MSIOF nodesLad Prabhakar1-0/+62
Add the DT nodes needed by MSIOF[0123] interfaces to the SoC dtsi. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Link: https://lore.kernel.org/r/1594811350-14066-16-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-17arm64: dts: renesas: r8a774e1: Add I2C and IIC-DVFS supportLad Prabhakar1-3/+116
Add the I2C[0-6] and IIC Bus Interface for DVFS (IIC for DVFS) devices nodes to the r8a774e1 device tree. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Link: https://lore.kernel.org/r/1594811350-14066-14-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-07-17arm64: dts: renesas: r8a774e1: Add SDHI nodesLad Prabhakar1-3/+29
Add SDHI[0-2] device nodes to R8A774E1 SoC. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Link: https://lore.kernel.org/r/1594811350-14066-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.