aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-10-09ixgbe: fix masking of bits read from IXGBE_VXLANCTRL registerSabrina Dubroca1-1/+1
In ixgbe_clear_udp_tunnel_port(), we read the IXGBE_VXLANCTRL register and then try to mask some bits out of the value, using the logical instead of bitwise and operator. Fixes: a21d0822ff69 ("ixgbe: add support for geneve Rx offload") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ixgbe: Return error when getting PHY address if PHY access is not supportedMark D Rustad1-0/+4
In cases where PHY register access is not supported, don't mislead a caller into thinking that it is supported by returning a PHY address. Instead, return -EOPNOTSUPP when PHY access is not supported. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-09ALSA: line6: Fix leftover URB at error-path during probeTakashi Iwai1-3/+4
While line6_probe() may kick off URB for a control MIDI endpoint, the function doesn't clean up it properly at its error path. This results in a leftover URB action that is eventually triggered later and causes an Oops like: general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 0 Comm: swapper/1 Not tainted RIP: 0010:usb_fill_bulk_urb ./include/linux/usb.h:1619 RIP: 0010:line6_start_listen+0x3fe/0x9e0 sound/usb/line6/driver.c:76 Call Trace: <IRQ> line6_data_received+0x1f7/0x470 sound/usb/line6/driver.c:326 __usb_hcd_giveback_urb+0x2e0/0x650 drivers/usb/core/hcd.c:1779 usb_hcd_giveback_urb+0x337/0x420 drivers/usb/core/hcd.c:1845 dummy_timer+0xba9/0x39f0 drivers/usb/gadget/udc/dummy_hcd.c:1965 call_timer_fn+0x2a2/0x940 kernel/time/timer.c:1281 .... Since the whole clean-up procedure is done in line6_disconnect() callback, we can simply call it in the error path instead of open-coding the whole again. It'll fix such an issue automagically. The bug was spotted by syzkaller. Fixes: eedd0e95d355 ("ALSA: line6: Don't forget to call driver's destructor at error path") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: line6: Fix NULL dereference at podhd_disconnect()Takashi Iwai1-1/+2
When podhd_init() failed with the acquiring a ctrl i/f, the line6 helper still calls the disconnect callback that eventually calls again usb_driver_release_interface() with the NULL intf. Put the proper NULL check before calling it for avoiding an Oops. Fixes: fc90172ba283 ("ALSA: line6: Claim pod x3 usb data interface") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: line6: Fix missing initialization before error pathTakashi Iwai1-2/+3
The error path in podhd_init() tries to clear the pending timer, while the timer object is initialized at the end of init sequence, thus it may hit the uninitialized object, as spotted by syzkaller: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 1845 Comm: kworker/1:2 Not tainted 4.14.0-rc2-42613-g1488251d1a98 #238 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x6c4/0x1a00 kernel/locking/lockdep.c:769 __lock_acquire+0x27e/0x4550 kernel/locking/lockdep.c:3385 lock_acquire+0x259/0x620 kernel/locking/lockdep.c:4002 del_timer_sync+0x12c/0x280 kernel/time/timer.c:1237 podhd_disconnect+0x8c/0x160 sound/usb/line6/podhd.c:299 line6_probe+0x844/0x1310 sound/usb/line6/driver.c:783 podhd_probe+0x64/0x70 sound/usb/line6/podhd.c:474 .... For addressing it, assure the initializations of timer and work by moving them to the beginning of podhd_init(). Fixes: 790869dacc3d ("ALSA: line6: Add support for POD X3") Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09netfilter: xt_bpf: Fix XT_BPF_MODE_FD_PINNED mode of 'xt_bpf_info_v1'Shmulik Ladkani4-2/+27
Commit 2c16d6033264 ("netfilter: xt_bpf: support ebpf") introduced support for attaching an eBPF object by an fd, with the 'bpf_mt_check_v1' ABI expecting the '.fd' to be specified upon each IPT_SO_SET_REPLACE call. However this breaks subsequent iptables calls: # iptables -A INPUT -m bpf --object-pinned /sys/fs/bpf/xxx -j ACCEPT # iptables -A INPUT -s 5.6.7.8 -j ACCEPT iptables: Invalid argument. Run `dmesg' for more information. That's because iptables works by loading existing rules using IPT_SO_GET_ENTRIES to userspace, then issuing IPT_SO_SET_REPLACE with the replacement set. However, the loaded 'xt_bpf_info_v1' has an arbitrary '.fd' number (from the initial "iptables -m bpf" invocation) - so when 2nd invocation occurs, userspace passes a bogus fd number, which leads to 'bpf_mt_check_v1' to fail. One suggested solution [1] was to hack iptables userspace, to perform a "entries fixup" immediatley after IPT_SO_GET_ENTRIES, by opening a new, process-local fd per every 'xt_bpf_info_v1' entry seen. However, in [2] both Pablo Neira Ayuso and Willem de Bruijn suggested to depricate the xt_bpf_info_v1 ABI dealing with pinned ebpf objects. This fix changes the XT_BPF_MODE_FD_PINNED behavior to ignore the given '.fd' and instead perform an in-kernel lookup for the bpf object given the provided '.path'. It also defines an alias for the XT_BPF_MODE_FD_PINNED mode, named XT_BPF_MODE_PATH_PINNED, to better reflect the fact that the user is expected to provide the path of the pinned object. Existing XT_BPF_MODE_FD_ELF behavior (non-pinned fd mode) is preserved. References: [1] https://marc.info/?l=netfilter-devel&m=150564724607440&w=2 [2] https://marc.info/?l=netfilter-devel&m=150575727129880&w=2 Reported-by: Rafael Buchbinder <rafi@rbk.ms> Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-09ALSA: seq: Fix copy_from_user() call inside lockTakashi Iwai2-8/+20
The event handler in the virmidi sequencer code takes a read-lock for the linked list traverse, while it's calling snd_seq_dump_var_event() in the loop. The latter function may expand the user-space data depending on the event type. It eventually invokes copy_from_user(), which might be a potential dead-lock. The sequencer core guarantees that the user-space data is passed only with atomic=0 argument, but snd_virmidi_dev_receive_event() ignores it and always takes read-lock(). For avoiding the problem above, this patch introduces rwsem for non-atomic case, while keeping rwlock for atomic case. Also while we're at it: the superfluous irq flags is dropped in snd_virmidi_input_open(). Reported-by: Jia-Ju Bai <baijiaju1990@163.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09ALSA: usb-audio: Add sample rate quirk for Plantronics P610Kai-Heng Feng1-0/+1
Like other Plantronics devices, P610 does not support sample rate reading. Apply sample rate quirk to it. BugLink: https://bugs.launchpad.net/bugs/1719853 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-09netfilter: SYNPROXY: skip non-tcp packet in {ipv4, ipv6}_synproxy_hookLin Zhang2-2/+3
In function {ipv4,ipv6}_synproxy_hook we expect a normal tcp packet, but the real server maybe reply an icmp error packet related to the exist tcp conntrack, so we will access wrong tcp data. Fix it by checking for the protocol field and only process tcp traffic. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-08tipc: Unclone message at secondary destination lookupJon Maloy1-0/+8
When a bundling message is received, the function tipc_link_input() calls function tipc_msg_extract() to unbundle all inner messages of the bundling message before adding them to input queue. The function tipc_msg_extract() just clones all inner skb for all inner messagges from the bundling skb. This means that the skb headroom of an inner message overlaps with the data part of the preceding message in the bundle. If the message in question is a name addressed message, it may be subject to a secondary destination lookup, and eventually be sent out on one of the interfaces again. But, since what is perceived as headroom by the device driver in reality is the last bytes of the preceding message in the bundle, the latter will be overwritten by the MAC addresses of the L2 header. If the preceding message has not yet been consumed by the user, it will evenually be delivered with corrupted contents. This commit fixes this by uncloning all messages passing through the function tipc_msg_lookup_dest(), hence ensuring that the headroom is always valid when the message is passed on. Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08tipc: correct initialization of skb listJon Maloy1-2/+2
We change the initialization of the skb transmit buffer queues in the functions tipc_bcast_xmit() and tipc_rcast_xmit() to also initialize their spinlocks. This is needed because we may, during error conditions, need to call skb_queue_purge() on those queues further down the stack. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08Linux 4.14-rc4Linus Torvalds1-1/+1
2017-10-08gso: fix payload length when gso_size is zeroAlexey Kodanev3-3/+3
When gso_size reset to zero for the tail segment in skb_segment(), later in ipv6_gso_segment(), __skb_udp_tunnel_segment() and gre_gso_segment() we will get incorrect results (payload length, pcsum) for that segment. inet_gso_segment() already has a check for gso_size before calculating payload. The issue was found with LTP vxlan & gre tests over ixgbe NIC. Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08mlxsw: spectrum_router: Avoid expensive lookup during route removalIdo Schimmel1-14/+0
In commit fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") I increased the scale of supported VRFs by having all of them share the same LPM tree. In order to avoid look-ups for prefix lengths that don't exist, each route removal would trigger an aggregation across all the active virtual routers to see which prefix lengths are in use and which aren't and structure the tree accordingly. With the way the data structures are currently laid out, this is a very expensive operation. When preformed repeatedly - due to the invocation of the abort mechanism - and with enough VRFs, this can result in a hung task. For now, avoid this optimization until it can be properly re-added in net-next. Fixes: fc922bb0dd94 ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-08pinctrl: cherryview: fix issues caused by dynamic gpio irqs mappingGrygorii Strashko1-1/+13
New GPIO IRQs are allocated and mapped dynamically by default when GPIO IRQ infrastructure is used by cherryview-pinctrl driver. This causes issues on some Intel platforms [1][2] with broken BIOS which hardcodes Linux IRQ numbers in their ACPI tables. On such platforms cherryview-pinctrl driver should allocate and map all GPIO IRQs at probe time. Side effect - "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n" can be seen at boot log. NOTE. It still may fail if boot sequence will changed and some interrupt controller will be probed before cherryview-pinctrl which will shift Linux IRQ numbering (expected with CONFIG_SPARCE_IRQ enabled). [1] https://bugzilla.kernel.org/show_bug.cgi?id=194945 [2] https://lkml.org/lkml/2017/9/28/153 Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Chris Gorman <chrisjohgorman@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reported-by: Chris Gorman <chrisjohgorman@gmail.com> Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Chris Gorman <chrisjohgorman@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-07bpf: fix liveness markingAlexei Starovoitov1-0/+5
while processing Rx = Ry instruction the verifier does regs[insn->dst_reg] = regs[insn->src_reg] which often clears write mark (when Ry doesn't have it) that was just set by check_reg_arg(Rx) prior to the assignment. That causes mark_reg_read() to keep marking Rx in this block as REG_LIVE_READ (since the logic incorrectly misses that it's screened by the write) and in many of its parents (until lucky write into the same Rx or beginning of the program). That causes is_state_visited() logic to miss many pruning opportunities. Furthermore mark_reg_read() logic propagates the read mark for BPF_REG_FP as well (though it's readonly) which causes harmless but unnecssary work during is_state_visited(). Note that do_propagate_liveness() skips FP correctly, so do the same in mark_reg_read() as well. It saves 0.2 seconds for the test below program before after bpf_lb-DLB_L3.o 2604 2304 bpf_lb-DLB_L4.o 11159 3723 bpf_lb-DUNKNOWN.o 1116 1110 bpf_lxc-DDROP_ALL.o 34566 28004 bpf_lxc-DUNKNOWN.o 53267 39026 bpf_netdev.o 17843 16943 bpf_overlay.o 8672 7929 time ~11 sec ~4 sec Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-07doc: Fix typo "8023.ad" in bonding documentationAxel Beckert1-1/+1
Should be "802.3ad" like everywhere else in the document. Signed-off-by: Axel Beckert <abe@deuxchevaux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-07ipv6: fix net.ipv6.conf.all.accept_dad behaviour for realMatteo Croce1-2/+2
Commit 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") was intended to affect accept_dad flag handling in such a way that DAD operation and mode on a given interface would be selected according to the maximum value of conf/{all,interface}/accept_dad. However, addrconf_dad_begin() checks for particular cases in which we need to skip DAD, and this check was modified in the wrong way. Namely, it was modified so that, if the accept_dad flag is 0 for the given interface *or* for all interfaces, DAD would be skipped. We have instead to skip DAD if accept_dad is 0 for the given interface *and* for all interfaces. Fixes: 35e015e1f577 ("ipv6: fix net.ipv6.conf.all interface DAD handlers") Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Matteo Croce <mcroce@redhat.com> Reported-by: Erik Kline <ek@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-07Merge tag 'scsi-fixes' of ↵Linus Torvalds8-31/+36
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - a couple of serious fixes: use after free and blacklist for WRITE SAME - one error leg fix: write_pending failure - one user experience problem: do not override max_sectors_kb - one minor unused function removal * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsis: Fix write_pending failure path scsi: libiscsi: Remove iscsi_destroy_session scsi: libiscsi: Fix use-after-free race during iscsi_session_teardown scsi: sd: Do not override max_sectors_kb sysfs setting scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP
2017-10-07Merge branch 'i2c/for-current-4.14' of ↵Linus Torvalds5-10/+14
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "I2C has three driver fixes for the newly introduced drivers and one ID addition for the i801 driver" * 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i2c-stm32f7: make structure stm32f7_setup static const i2c: ensure termination of *_device_id tables i2c: i801: Add support for Intel Cedar Fork i2c: stm32f7: fix setup structure
2017-10-07Merge tag 'mmc-v4.14-rc3' of ↵Linus Torvalds11-162/+81
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix driver strength selection when selecting hs400es - Delete bounce buffer handling: This change fixes a problem related to how bounce buffers are being allocated. However, instead of trying to fix that, let's just remove the mmc bounce buffer code altogether, as it has practically no use. MMC host: - meson-gx: A couple of fixes related to clock/phase/tuning - sdhci-xenon: Fix clock resource by adding an optional bus clock" * tag 'mmc-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock mmc: meson-gx: include tx phase in the tuning process mmc: meson-gx: fix rx phase reset mmc: meson-gx: make sure the clock is rounded down mmc: Delete bounce buffer handling mmc: core: add driver strength selection when selecting hs400es
2017-10-07gpio: omap: Fix lost edge interruptsGrygorii Strashko1-9/+13
Now acking of edge irqs happens the following way: - omap_gpio_irq_handler - "isr" = read irq status - omap_clear_gpio_irqbank(bank, isr_saved & ~level_mask); ^ clear edge status, so irq can be accepted - loop while "isr" generic_handle_irq() - handle_edge_irq() - desc->irq_data.chip->irq_ack(&desc->irq_data); - omap_gpio_ack_irq() it might be that at this moment edge IRQ was triggered again and it will be cleared and IRQ will be lost. Use handle_simple_irq and clear edge interrupts early without disabling them in omap_gpio_irq_handler to avoid loosing interrupts. [1] https://marc.info/?l=linux-omap&m=149004465313534&w=2 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-06Merge tag 'hwmon-for-linus-v4.14-rc4' of ↵Linus Torvalds1-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix up error path in xgene driver" * tag 'hwmon-for-linus-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (xgene) Fix up error handling path mixup in 'xgene_hwmon_probe()'
2017-10-06Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-5/+23
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: - build fix to export the clk_bulk_prepare() symbol - suspend fix for Samsung Exynos SoCs where we need to keep clks on across suspend - two critical clk markings for clks that shouldn't ever turn off on Rockchip SoCs - a fix for a copy-paste mistake on Rockchip rk3128 causing some clks to touch the same bit and trample over one another * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: samsung: exynos4: Enable VPLL and EPLL clocks for suspend/resume cycle clk: Export clk_bulk_prepare() clk: rockchip: add sclk_timer5 as critical clock on rk3128 clk: rockchip: fix up rk3128 pvtm and mipi_24m gate regs error clk: rockchip: add pclk_pmu as critical clock on rk3128
2017-10-06Merge tag 'arc-4.14-rc4' of ↵Linus Torvalds17-28/+130
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC udpates from Vineet Gupta: - updates for various platforms - boot log updates for upcoming HS48 family of cores (dual issue) * tag 'arc-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Add reset controller node to manage ethernet reset ARC: [plat-hsdk]: Temporary fix to set CPU frequency to 1GHz ARC: fix allnoconfig build warning ARCv2: boot log: identify HS48 cores (dual issue) ARC: boot log: decontaminate ARCv2 ISA_CONFIG register arc: remove redundant UTS_MACHINE define in arch/arc/Makefile ARC: [plat-eznps] Update platform maintainer as Noam left ARC: [plat-hsdk] use actual clk driver to manage cpu clk ARC: [*defconfig] Reenable soft lock-up detector ARC: [plat-axs10x] sdio: Temporary fix of sdio ciu frequency ARC: [plat-hsdk] sdio: Temporary fix of sdio ciu frequency ARC: [plat-axs103] Add temporary quirk to reset ethernet IP
2017-10-06Merge tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds2-3/+30
Pull xfs fixes from Darrick Wong: - fix a race between overlapping copy on write aio - fix cow fork swapping when we defragment reflinked files * tag 'xfs-4.14-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: handle racy AIO in xfs_reflink_end_cow xfs: always swap the cow forks when swapping extents
2017-10-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds9-22/+45
Pull block fixes from Jens Axboe: "A collection of fixes for this series. This contains: - NVMe pull request from Christoph, one uuid attribute fix, and one fix for the controller memory buffer address for remapped BARs. - use-after-free fix for bsg, from Benjamin Block. - bcache race/use-after-free fix for a list traversal, fixing a regression in this merge window. From Coly Li. - null_blk change configfs dependency change from a 'depends' to a 'select'. This is a change from this merge window as well. From me. - nbd signal fix from Josef, fixing a regression introduced with the status code changes. - nbd MAINTAINERS mailing list entry update. - blk-throttle stall fix from Joseph Qi. - blk-mq-debugfs fix from Omar, fixing an issue where we don't register the IO scheduler debugfs directory, if the driver is loaded with it. Only shows up if you switch through the sysfs interface" * 'for-linus' of git://git.kernel.dk/linux-block: bsg-lib: fix use-after-free under memory-pressure nvme-pci: Use PCI bus address for data/queues in CMB blk-mq-debugfs: fix device sched directory for default scheduler null_blk: change configfs dependency to select blk-throttle: fix possible io stall when upgrade to max MAINTAINERS: update list for NBD nbd: fix -ERESTARTSYS handling nvme: fix visibility of "uuid" ns attribute bcache: use llist_for_each_entry_safe() in __closure_wake_up()
2017-10-06Merge tag 'pci-v4.14-fixes-4' of ↵Linus Torvalds3-27/+50
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "Fix legacy IDE probe issues exposed by recent PCI core IRQ mapping changes (Bartlomiej Zolnierkiewicz, Lorenzo Pieralisi)" * tag 'pci-v4.14-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: ide: fix IRQ assignment for PCI bus order probing ide: pci: free PCI BARs on initialization failure ide: free hwif->portdev on hwif_init() failure
2017-10-06Merge tag 'arm64-fixes' of ↵Linus Torvalds6-7/+45
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Bring initialisation of user space undefined instruction handling early (core_initcall) since late_initcall() happens after modprobe in initramfs is invoked. Similar fix for fpsimd initialisation - Increase the kernel stack when KASAN is enabled - Bring the PCI ACS enabling earlier via the iort_init_platform_devices() - Fix misleading data abort address printing (decimal vs hex) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Ensure fpsimd support is ready before userspace is active arm64: Ensure the instruction emulation is ready for userspace arm64: Use larger stacks when KASAN is selected ACPI/IORT: Fix PCI ACS enablement arm64: fix misleading data abort decoding
2017-10-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds7-13/+20
Pull KVM fixes from Radim Krčmář: - fix PPC XIVE interrupt delivery - fix x86 RCU breakage from asynchronous page faults when built without PREEMPT_COUNT - fix x86 build with -frecord-gcc-switches - fix x86 build without X86_LOCAL_APIC * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: add X86_LOCAL_APIC dependency x86/kvm: Move kvm_fastop_exception to .fixup section kvm/x86: Avoid async PF preempting the kernel incorrectly KVM: PPC: Book3S: Fix server always zero from kvmppc_xive_get_xive()
2017-10-06Merge tag 'for-linus' of ↵Linus Torvalds9-14/+34
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "This is a pretty small pull request. Only 6 patches in total. There are no outstanding -rc patches on the mailing list after this pull request, so only if some new issues are discovered in the remainder of the rc cycles will you hear from me again. Summary: - a fix for iwpm netlink usage - a fix for error unwinding in mlx5 - two fixes to vlan handling in qedr - a couple small i40iw fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: i40iw: Fix port number for query QP i40iw: Add missing memory barriers RDMA/qedr: Parse vlan priority as sl RDMA/qedr: Parse VLAN ID correctly and ignore the value of zero IB/mlx5: Fix label order in error path handling RDMA/iwpm: Properly mark end of NL messages
2017-10-06ppp: fix race in ppp device destructionGuillaume Nault1-0/+20
ppp_release() tries to ensure that netdevices are unregistered before decrementing the unit refcount and running ppp_destroy_interface(). This is all fine as long as the the device is unregistered by ppp_release(): the unregister_netdevice() call, followed by rtnl_unlock(), guarantee that the unregistration process completes before rtnl_unlock() returns. However, the device may be unregistered by other means (like ppp_nl_dellink()). If this happens right before ppp_release() calling rtnl_lock(), then ppp_release() has to wait for the concurrent unregistration code to release the lock. But rtnl_unlock() releases the lock before completing the device unregistration process. This allows ppp_release() to proceed and eventually call ppp_destroy_interface() before the unregistration process completes. Calling free_netdev() on this partially unregistered device will BUG(): ------------[ cut here ]------------ kernel BUG at net/core/dev.c:8141! invalid opcode: 0000 [#1] SMP CPU: 1 PID: 1557 Comm: pppd Not tainted 4.14.0-rc2+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 Call Trace: ppp_destroy_interface+0xd8/0xe0 [ppp_generic] ppp_disconnect_channel+0xda/0x110 [ppp_generic] ppp_unregister_channel+0x5e/0x110 [ppp_generic] pppox_unbind_sock+0x23/0x30 [pppox] pppoe_connect+0x130/0x440 [pppoe] SYSC_connect+0x98/0x110 ? do_fcntl+0x2c0/0x5d0 SyS_connect+0xe/0x10 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: free_netdev+0x107/0x110 RSP: ffffc28a40573d88 ---[ end trace ed294ff0cc40eeff ]--- We could set the ->needs_free_netdev flag on PPP devices and move the ppp_destroy_interface() logic in the ->priv_destructor() callback. But that'd be quite intrusive as we'd first need to unlink from the other channels and units that depend on the device (the ones that used the PPPIOCCONNECT and PPPIOCATTACH ioctls). Instead, we can just let the netdevice hold a reference on its ppp_file. This reference is dropped in ->priv_destructor(), at the very end of the unregistration process, so that neither ppp_release() nor ppp_disconnect_channel() can call ppp_destroy_interface() in the interim. Reported-by: Beniamino Galvani <bgalvani@redhat.com> Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06Merge branch 'for-4.14-rc4' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two more fixes for bugs introduced in 4.13. The sector_t problem with 32bit architecture and !LBDAF config seems serious but the number of affected deployments is hopefully low. The clashing status bits could lead to a confusing in-memory state of the whole-filesystem operations if used with the quota override sysfs knob" * 'for-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix overlap of fs_info::flags values btrfs: avoid overflow when sector_t is 32 bit
2017-10-06Merge tag 'ceph-for-4.14-rc4' of git://github.com/ceph/ceph-clientLinus Torvalds2-10/+9
Pull ceph fixes from Ilya Dryomov: "Two fixups for CephFS snapshot-handling patches in -rc1" * tag 'ceph-for-4.14-rc4' of git://github.com/ceph/ceph-client: ceph: fix __choose_mds() for LSSNAP request ceph: properly queue cap snap for newly created snap realm
2017-10-06ARC: [plat-hsdk]: Add reset controller node to manage ethernet resetEugeniy Paltsev2-0/+10
DW ethernet controller on HSDK hangs sometimes after SW reset, so add reset node to make possible to reset DW ethernet controller HW. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-10-06Merge branch 'overlayfs-linus' of ↵Linus Torvalds10-37/+60
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "Fix a regression in 4.14 and one in 4.13. The latter is a case when Docker is doing something it really shouldn't and gets away with it. We now print a warning instead of erroring out. There are also fixes to several error paths" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: fix regression caused by exclusive upper/work dir protection ovl: fix missing unlock_rename() in ovl_do_copy_up() ovl: fix dentry leak in ovl_indexdir_cleanup() ovl: fix dput() of ERR_PTR in ovl_cleanup_index() ovl: fix error value printed in ovl_lookup_index() ovl: fix may_write_real() for overlayfs directories
2017-10-06Merge tag 'powerpc-4.14-4' of ↵Linus Torvalds8-9/+48
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Nine small fixes, really nothing that stands out. A work-around for a spurious MCE on Power9. A CXL fault handling fix, some fixes to the new XIVE code, and a fix to the new 32-bit STRICT_KERNEL_RWX code. Fixes for old code/stable: an fix to an incorrect TLB flush on boot but not on any current machines, a compile error on 4xx and a fix to memory hotplug when using radix (Power9). Thanks to: Anton Blanchard, Cédric Le Goater, Christian Lamparter, Christophe Leroy, Christophe Lombard, Guenter Roeck, Jeremy Kerr, Michael Neuling, Nicholas Piggin" * tag 'powerpc-4.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Increase memory block size to 1GB on radix powerpc/mm: Call flush_tlb_kernel_range with interrupts enabled powerpc/xive: Clear XIVE internal structures when a CPU is removed powerpc/xive: Fix IPI reset powerpc/4xx: Fix compile error with 64K pages on 40x, 44x powerpc: Fix action argument for cpufeatures-based TLB flush cxl: Fix memory page not handled powerpc: Fix workaround for spurious MCE on POWER9 powerpc: Handle MCE on POWER9 with only DSISR bit 30 set
2017-10-06Merge tag 'drm-fixes-for-v4.14-rc4' of ↵Linus Torvalds9-34/+44
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Some i915 fixes from the last two weeks (as they were on a strange base and I just waited for rc3), also a single sun4i hdmi fix" * tag 'drm-fixes-for-v4.14-rc4' of git://people.freedesktop.org/~airlied/linux: drm/i915/glk: Fix DMC/DC state idleness calculation drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume drm/i915: Fix DDI PHY init if it was already on drm/sun4i: hdmi: Disable clks in bind function error path and unbind function drm/i915/bios: ignore HDMI on port A drm/i915: remove redundant variable hw_check drm/i915: always update ELD connector type after get modes
2017-10-06Merge branch 'core-watchdog-for-linus' of ↵Linus Torvalds10-604/+456
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull watchddog clean-up and fixes from Thomas Gleixner: "The watchdog (hard/softlockup detector) code is pretty much broken in its current state. The patch series addresses this by removing all duct tape and refactoring it into a workable state. The reasons why I ask for inclusion that late in the cycle are: 1) The code causes lockdep splats vs. hotplug locking which get reported over and over. Unfortunately there is no easy fix. 2) The risk of breakage is minimal because it's already broken 3) As 4.14 is a long term stable kernel, I prefer to have working watchdog code in that and the lockdep issues resolved. I wouldn't ask you to pull if 4.14 wouldn't be a LTS kernel or if the solution would be easy to backport. 4) The series was around before the merge window opened, but then got delayed due to the UP failure caused by the for_each_cpu() surprise which we discussed recently. Changes vs. V1: - Addressed your review points - Addressed the warning in the powerpc code which was discovered late - Changed two function names which made sense up to a certain point in the series. Now they match what they do in the end. - Fixed a 'unused variable' warning, which got not detected by the intel robot. I triggered it when trying all possible related config combinations manually. Randconfig testing seems not random enough. The changes have been tested by and reviewed by Don Zickus and tested and acked by Micheal Ellerman for powerpc" * 'core-watchdog-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) watchdog/core: Put softlockup_threads_initialized under ifdef guard watchdog/core: Rename some softlockup_* functions powerpc/watchdog: Make use of watchdog_nmi_probe() watchdog/core, powerpc: Lock cpus across reconfiguration watchdog/core, powerpc: Replace watchdog_nmi_reconfigure() watchdog/hardlockup/perf: Fix spelling mistake: "permanetely" -> "permanently" watchdog/hardlockup/perf: Cure UP damage watchdog/hardlockup: Clean up hotplug locking mess watchdog/hardlockup/perf: Simplify deferred event destroy watchdog/hardlockup/perf: Use new perf CPU enable mechanism watchdog/hardlockup/perf: Implement CPU enable replacement watchdog/hardlockup/perf: Implement init time detection of perf watchdog/hardlockup/perf: Implement init time perf validation watchdog/core: Get rid of the racy update loop watchdog/core, powerpc: Make watchdog_nmi_reconfigure() two stage watchdog/sysctl: Clean up sysctl variable name space watchdog/sysctl: Get rid of the #ifdeffery watchdog/core: Clean up header mess watchdog/core: Further simplify sysctl handling watchdog/core: Get rid of the thread teardown/setup dance ...
2017-10-06arm64: Ensure fpsimd support is ready before userspace is activeSuzuki K Poulose1-1/+1
We register the pm/hotplug callbacks for FPSIMD as late_initcall, which happens after the userspace is active (from initramfs via populate_rootfs, a rootfs_initcall). Make sure we are ready even before the userspace could potentially use it, by promoting to a core_initcall. Cc: Will Deacon <will.deacon@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dave Martin <dave.martin@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-06arm64: Ensure the instruction emulation is ready for userspaceSuzuki K Poulose2-2/+2
We trap and emulate some instructions (e.g, mrs, deprecated instructions) for the userspace. However the handlers for these are registered as late_initcalls and the userspace could be up and running from the initramfs by that time (with populate_rootfs, which is a rootfs_initcall()). This could cause problems for the early applications ending up in failure like : [ 11.152061] modprobe[93]: undefined instruction: pc=0000ffff8ca48ff4 This patch promotes the specific calls to core_initcalls, which are guaranteed to be completed before we hit userspace. Cc: stable@vger.kernel.org Cc: Dave Martin <dave.martin@arm.com> Cc: Matthias Brugger <mbrugger@suse.com> Cc: James Morse <james.morse@arm.com> Reported-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-10-06netfilter: x_tables: avoid stack-out-of-bounds read in ↵Eric Dumazet1-2/+2
xt_copy_counters_from_user syzkaller reports an out of bound read in strlcpy(), triggered by xt_copy_counters_from_user() Fix this by using memcpy(), then forcing a zero byte at the last position of the destination, as Florian did for the non COMPAT code. Fixes: d7591f0c41ce ("netfilter: x_tables: introduce and use xt_copy_counters_from_user") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-06netfilter: nf_tables: do not dump chain counters if not enabledPablo Neira Ayuso1-1/+1
Chain counters are only enabled on demand since 9f08ea848117, skip them when dumping them via netlink. Fixes: 9f08ea848117 ("netfilter: nf_tables: keep chain counters away from hot path") Reported-by: Johny Mattsson <johny.mattsson+kernel@gmail.com> Tested-by: Johny Mattsson <johny.mattsson+kernel@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-10-06powerpc/tm: Fix illegal TM state in signal handlerGustavo Romero1-1/+12
Currently it's possible that on returning from the signal handler through the restore_tm_sigcontexts() code path (e.g. from a signal caught due to a `trap` instruction executed in the middle of an HTM block, or a deliberately constructed sigframe) an illegal TM state (like TS=10 TM=0, i.e. "T0") is set in SRR1 and when `rfid` sets implicitly the MSR register from SRR1 register on return to userspace it causes a TM Bad Thing exception. That illegal state can be set (a) by a malicious user that disables the TM bit by tweaking the bits in uc_mcontext before returning from the signal handler or (b) by a sufficient number of context switches occurring such that the load_tm counter overflows and TM is disabled whilst in the signal handler. This commit fixes the illegal TM state by ensuring that TM bit is always enabled before we return from restore_tm_sigcontexts(). A small comment correction is made as well. Fixes: 5d176f751ee3 ("powerpc: tm: Enable transactional memory (TM) lazily for userspace") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Gustavo Romero <gromero@linux.vnet.ibm.com> Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-06powerpc/64s: Use emergency stack for kernel TM Bad Thing program checksCyril Bur1-1/+23
When using transactional memory (TM), the CPU can be in one of six states as far as TM is concerned, encoded in the Machine State Register (MSR). Certain state transitions are illegal and if attempted trigger a "TM Bad Thing" type program check exception. If we ever hit one of these exceptions it's treated as a bug, ie. we oops, and kill the process and/or panic, depending on configuration. One case where we can trigger a TM Bad Thing, is when returning to userspace after a system call or interrupt, using RFID. When this happens the CPU first restores the user register state, in particular r1 (the stack pointer) and then attempts to update the MSR. However the MSR update is not allowed and so we take the program check with the user register state, but the kernel MSR. This tricks the exception entry code into thinking we have a bad kernel stack pointer, because the MSR says we're coming from the kernel, but r1 is pointing to userspace. To avoid this we instead always switch to the emergency stack if we take a TM Bad Thing from the kernel. That way none of the user register values are used, other than for printing in the oops message. This is the fix for CVE-2017-1000255. Fixes: 5d176f751ee3 ("powerpc: tm: Enable transactional memory (TM) lazily for userspace") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Cyril Bur <cyrilbur@gmail.com> [mpe: Rewrite change log & comments, tweak asm slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-06powerpc/powernv: Increase memory block size to 1GB on radixAnton Blanchard1-1/+9
Memory hot unplug on PowerNV radix hosts is broken. Our memory block size is 256MB but since we map the linear region with very large pages, each pte we tear down maps 1GB. A hot unplug of one 256MB memory block results in 768MB of memory getting unintentionally unmapped. At this point we are likely to oops. Fix this by increasing our memory block size to 1GB on PowerNV radix hosts. Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-10-05selftests/net: rxtimestamp: Fix an off by oneDan Carpenter1-1/+1
The > should be >= so that we don't write one element beyond the end of the array. Fixes: 16e781224198 ("selftests/net: Add a test to validate behavior of rx timestamps") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-06Merge tag 'drm-misc-fixes-2017-10-05' of ↵Dave Airlie1-5/+14
git://anongit.freedesktop.org/git/drm-misc into drm-fixes One bugfix in sun4i for 4.14 * tag 'drm-misc-fixes-2017-10-05' of git://anongit.freedesktop.org/git/drm-misc: drm/sun4i: hdmi: Disable clks in bind function error path and unbind function
2017-10-06Merge tag 'drm-intel-fixes-2017-10-04' of ↵Dave Airlie4-22/+6
git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for 4.14-rc4: All 3 highest GLK bugs fixed by Imre: - GLK drv reload - Fix DDI Phy init if it was already on. - GLK suspend resume - Reprogram DMC firmware after s3/s4. - GLK DC states - Fix idleness calculation. * tag 'drm-intel-fixes-2017-10-04' of git://anongit.freedesktop.org/git/drm-intel: drm/i915/glk: Fix DMC/DC state idleness calculation drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume drm/i915: Fix DDI PHY init if it was already on
2017-10-05Merge tag 'pm-4.14-rc4' of ↵Linus Torvalds1-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "This fixes a code ordering issue in the main suspend-to-idle loop that causes some "low power S0 idle" conditions to be incorrectly reported as unmet with suspend/resume debug messages enabled" * tag 'pm-4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / s2idle: Invoke the ->wake() platform callback earlier
Powered by cgit, Gruvboxed by Blaster4385.