Age | Commit message (Collapse) | Author | Files | Lines |
|
from Tzung-Bi Shih <[email protected]>:
This series tries to reuse mt8183-mt6358-ts3a227-max98357.c for supporting
machine driver with rt1015 speaker amplifier.
The 1st patch is straightforward: re-order the header inclusions.
The 2nd patch adds document for the new proposed compatible string.
The 3rd patch changes the machine driver to support either "MAX98357A" or
"RT1015" codecs.
Tzung-Bi Shih (3):
ASoC: mediatek: mt8183: sort header inclusions in alphabetical
dt-bindings: mt8183: add compatible string for using rt1015
ASoC: mediatek: mt8183: support machine driver with rt1015
.../sound/mt8183-mt6358-ts3a227-max98357.txt | 5 +-
sound/soc/mediatek/Kconfig | 5 +-
.../mt8183/mt8183-mt6358-ts3a227-max98357.c | 171 +++++++++++++++---
3 files changed, 153 insertions(+), 28 deletions(-)
--
2.27.0.383.g050319c2ae-goog
|
|
Bossart <[email protected]>:
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac5790acaf98c929b826b3f7b4a438f9759
--
2.25.1
|
|
Srinivas Kandagatla <[email protected]>:
This patchset adds gapless compressed audio support on q6asm.
Gapless on q6asm is implemented using 2 streams in a single asm session.
First few patches are enhacements done to q6asm interface to allow
stream id per each command, gapless flags and silence meta data.
Along with this there are few trivial changes which I thought are necessary!
Last patch implements copy callback to allow finer control over buffer offsets,
specially in partial drain cases.
This patchset is tested on RB3 aka DB845c platform.
Thanks,
srini
Srinivas Kandagatla (11):
ASoC: q6asm: add command opcode to timeout error report
ASoC: q6asm: rename misleading session id variable
ASoC: q6asm: make commands specific to streams
ASoC: q6asm: use flags directly from asm-dai
ASoC: q6asm: add length to write command token
ASoC: q6asm: add support to remove intial and trailing silence
ASoC: q6asm: add support to gapless flag in asm open
ASoC: q6asm-dai: add next track metadata support
ASoC: qdsp6: use dev_err instead of pr_err
ASoC: qdsp6-dai: add gapless support
ASoC: q6asm-dai: add support to copy callback
sound/soc/qcom/qdsp6/q6asm-dai.c | 397 +++++++++++++++++++++++--------
sound/soc/qcom/qdsp6/q6asm.c | 173 +++++++++-----
sound/soc/qcom/qdsp6/q6asm.h | 48 ++--
3 files changed, 458 insertions(+), 160 deletions(-)
--
2.21.0
|
|
This patch will fix unused variables kernel warnings when
CONFIG_ACPI is disabled.
Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Machines with rt1015 should use the compatible string
"mt8183-mt6358-ts3a227-rt1015".
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Supports machine driver with rt1015 ("mt8183-mt6358-ts3a227-rt1015").
Embeds in existing mt8183-mt6358-ts3a227-max98357.c because they share
most of the code.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Sorts header inclusions in alphabetical.
Signed-off-by: Tzung-Bi Shih <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Make the error reporting more useful by adding opcode to it.
Without this its almost impossible to say which command actually
timed out.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
<[email protected]>:
This is hopefully the last set of fixes to avoid probe errors due to
stricter checks of DAI capabilities introduced late in the 5.8 cycle.
Daniel Baluta (1):
ASoC: SOF: imx: add min/max channels for SAI/ESAI on i.MX8/i.MX8M
Pierre-Louis Bossart (2):
ASoC: soc-dai: set dai_link dpcm_ flags with a helper
ASoC: Intel: bdw-rt5677: fix non BE conversion
include/sound/soc-dai.h | 1 +
sound/soc/generic/audio-graph-card.c | 4 +--
sound/soc/generic/simple-card.c | 4 +--
sound/soc/intel/boards/bdw-rt5677.c | 1 +
sound/soc/soc-dai.c | 38 ++++++++++++++++++++++++++++
sound/soc/sof/imx/imx8.c | 8 ++++++
sound/soc/sof/imx/imx8m.c | 8 ++++++
7 files changed, 60 insertions(+), 4 deletions(-)
base-commit: a5911ac5790acaf98c929b826b3f7b4a438f9759
--
2.25.1
|
|
Bossart <[email protected]>:
While experimenting and introducing errors in Baytrail topology files
until I got them right, I encountered multiple kernel oopses and
memory leaks. This is a first batch to harden the code, but we should
probably think of a tool to fuzz the topology...
Pierre-Louis Bossart (5):
ASoC: topology: fix kernel oops on route addition error
ASoC: topology: fix tlvs in error handling for widget_dmixer
ASoC: topology: use break on errors, not continue
ASoC: topology: factor kfree(se) in error handling
ASoC: topology: add more logs when topology load fails.
sound/soc/soc-topology.c | 97 ++++++++++++++++++++++++----------------
1 file changed, 58 insertions(+), 39 deletions(-)
base-commit: a5911ac5790acaf98c929b826b3f7b4a438f9759
--
2.25.1
|
|
Bossart <[email protected]>:
V2 with a number of cleanups:
split between I2C and SoundWire modes, as done for rt5682, and updated
Kconfigs.
removed useless initializations common to both modes
removed idle_bias on
fixed register classified as volatile in error
fixed SPDX comments
Pierre-Louis Bossart (2):
ASoC: codecs: max98373: split I2C and common parts
ASoC: Intel: sof-sdw: add MAX98373 I2C dependencies
Ryan Lee (2):
ASoC: codecs: max98373: Removed superfluous volume control from chip
default
ASoC: codecs: max98373: add SoundWire support
randerwang (2):
ASoc: codecs: max98373: remove Idle_bias_on to let codec suspend
ASoC: Intel: sdw_max98373: add card_late_probe support
sound/soc/codecs/Kconfig | 20 +-
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/max98373-i2c.c | 612 +++++++++++++++
sound/soc/codecs/max98373-sdw.c | 887 ++++++++++++++++++++++
sound/soc/codecs/max98373-sdw.h | 72 ++
sound/soc/codecs/max98373.c | 619 +--------------
sound/soc/codecs/max98373.h | 17 +-
sound/soc/intel/boards/Kconfig | 7 +-
sound/soc/intel/boards/sof_sdw.c | 19 +-
sound/soc/intel/boards/sof_sdw_common.h | 6 +
sound/soc/intel/boards/sof_sdw_max98373.c | 12 +
11 files changed, 1668 insertions(+), 607 deletions(-)
create mode 100644 sound/soc/codecs/max98373-i2c.c
create mode 100644 sound/soc/codecs/max98373-sdw.c
create mode 100644 sound/soc/codecs/max98373-sdw.h
base-commit: a5911ac5790acaf98c929b826b3f7b4a438f9759
--
2.25.1
|
|
The DSP should be notified for device removal only if the
probe was successful. Fixes the following KASAN bug:
BUG: KASAN: null-ptr-deref in sof_ipc_tx_message+0x80/0x160 [snd_sof]
Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Idle_bias_on is used to decide bias on/off in standby state by dapm.
When Idle_bias_on is set to one, dapm will keep max98373 active at
idle time. Max98373 is doing nothing in this state, so remove
idle_bias_on setting to let max98373 get suspended when it is idle.
Signed-off-by: randerwang <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ryan Lee <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Volume control in probe function is not necessary.
Signed-off-by: Ryan Lee <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add more dev_err() logs to help trace topology load failures, since we
have multiple error causes (e.g. invalid header or header that could
not be loaded).
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
No need to repeat the same thing multiple times when it can be done in
one location.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since the beginning of the topology, the code continues to the next
object even when an error is detected.
The topology should be handled with an all-or-nothing design, loading
a partially valid topology is a sure way to get bug reports that are
difficult to deal with.
Changing the behavior may break previous solutions and expose problems
in topology files delivered in the past, so it's probably not wise to
add this patch to stable branches without revalidation.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
we need to free all allocated tlvs, not just the one allocated in
the loop before releasing kcontrols - other the tlvs references will
leak.
Fixes: 9f90af3a995298 ('ASoC: topology: Consolidate and fix asoc_tplg_dapm_widget_*_create flow')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
When errors happens while loading graph components, the kernel oopses
while trying to remove all topology components. This can be
root-caused to a list pointing to memory that was already freed on
error.
remove_route() is already called on errors and will perform the
required cleanups so there's no need to free the route memory in
soc_tplg_dapm_graph_elems_load() if the route was added to the
list. We do however want to free the routes allocated but not added to
the list.
Fixes: 7df04ea7a31ea ('ASoC: topology: modify dapm route loading routine and add dapm route unloading')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This is identical with change for Intel platforms done with
commit 8c05246c0b58 ("ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell")
and fixes a regression on i.MX8/i.MX8M:
[ 25.705750] esai-Codec: ASoC: no backend playback stream
[ 27.923378] esai-Codec: ASoC: no users playback at close - state
This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.
Fixes: 9b5db059366ae2 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Daniel Baluta <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
When SOF is used, the normal links are converted into DPCM ones. This
generates an error
[ 58.276668] bdw-rt5677 bdw-rt5677: CPU DAI spi-RT5677AA:00 for rtd
Wake on Voice does not support playback
[ 58.276676] bdw-rt5677 bdw-rt5677: ASoC: can't create pcm Wake on
Voice :-22
Fix by forcing the capture direction.
Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Curtis Malainey <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a helper to walk through all the DAIs and set dpcm_playback and
dpcm_capture flags based on the DAIs capabilities, and use this helper
to avoid setting these flags arbitrarily in generic cards.
The commit referenced in the Fixes tag did not introduce the
configuration issue but will prevent the card from probing when
detecting invalid configurations.
Fixes: b73287f0b0745 ('ASoC: soc-pcm: dpcm: fix playback/capture checks')
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
After finishing using device node got from of_find_compatible_node(),
of_node_put() needs to be called.
Signed-off-by: Liao Pingfang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Bossart <[email protected]>:
Yet another cleanup series, with good findings of variables not used
for anything.
Pierre-Louis Bossart (6):
ASoC: amd: acp-da7219-max98357a: fix 'defined but not used' warning
ASoC: amd: acp-rt5645: fix 'defined but not used' warning
ASoC: amd: raven: acp3x-pcm-dma: fix 'set but not used' warning
ASoC: amd: raven: acp3x-i2s: fix 'set but not used' warning
ASoC: amd: raven: acp3x-pcm-dma: remove unused-but-set variable
ASoC: amd: raven: acp3x-i2s: remove unused-but-set variable
sound/soc/amd/acp-da7219-max98357a.c | 2 ++
sound/soc/amd/acp-rt5645.c | 2 ++
sound/soc/amd/raven/acp3x-i2s.c | 4 ----
sound/soc/amd/raven/acp3x-pcm-dma.c | 4 ----
4 files changed, 4 insertions(+), 8 deletions(-)
--
2.25.1
|
|
This adds default clock/PLL configuration to the driver
for usage with generic drivers like simple-card for usage
with a fixed rate clock.
Signed-off-by: Sebastian Reichel <[email protected]>
Reviewed-by: Adam Thomson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add ACPI dependency for evaluating DMIC hardware
runtime.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning. The variable prtd is set but not used.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning. The variable prtd is not used, remove.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning. the card variable is useless here
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning. the card variable is useless here.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add Shengjiu who's actively working on the latest fsl/nxp audio drivers.
Signed-off-by: Nicolin Chen <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Acked-by: Shengjiu Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The ASoC devm_ functions that register a component
(devm_snd_soc_register_component and devm_snd_dmaengine_pcm_register) will
clean their component by running snd_soc_unregister_component.
snd_soc_unregister_component will then remove all the components for the
device that was used to register the component in the first place.
However, some drivers register several components (such as a DAI and a
dmaengine PCM) on the same device, and if the dmaengine PCM is registered
first, then the DAI will be cleaned up first and
snd_dmaengine_pcm_unregister will be called next.
snd_dmaengine_pcm_unregister will then lookup the dmaengine PCM component
on the device, and if there's one unregister that component and release its
dmaengine channels. That doesn't happen in practice though since the first
call to snd_soc_unregister_component removed all the components, so we
never get the chance to release the dmaengine channels.
In order to fix this, instead of removing all the components for a given
device, we can simply remove the component that was registered in the first
place. We should have the same number of component registration than we
have components, so it should work just fine.
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning by removing unused variables
Suggested-by: Charles Keepax <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
<[email protected]>:
This cleanup patchset is only about kernel-doc, mostly trivial edits
and format correction.
v2: added Nicolin Chen's Acked-by tags and included the three
suggested edits.
Pierre-Louis Bossart (6):
ASoC: fsl: fsl_ssi_dbg: remove spurious kernel-doc comment start
ASoC: fsl: fsl_ssi: fix kernel-doc
ASoC: fsl: fsl-asoc-card: fix kernel-doc
ASoC: fsl: fsl_spdif: fix kernel-doc
ASoC: fsl: fsl_asrc: fix kernel-doc
ASoC: fsl: fsl_esai: fix kernel-doc
sound/soc/fsl/fsl-asoc-card.c | 21 +++++------
sound/soc/fsl/fsl_asrc.c | 57 +++++++++++++++++++---------
sound/soc/fsl/fsl_esai.c | 32 +++++++++-------
sound/soc/fsl/fsl_spdif.c | 5 ++-
sound/soc/fsl/fsl_ssi.c | 70 ++++++++++++++++++++++-------------
sound/soc/fsl/fsl_ssi_dbg.c | 4 +-
6 files changed, 115 insertions(+), 74 deletions(-)
--
2.25.1
|
|
<[email protected]>:
Hi All,
Here is in essence a resend of my 2 cleanup patches for the rt5670 ASoC
codec code, rebased on top of broonie/sound/for-5.9 with
broonie/sound/for-5.8 merged in.
Regards,
Hans
p.s.
I'll also send out the patch improving the comment in
cht_bsw_rt5672.c cht_codec_fixup() which Pierre-Louis requested soon.
|
|
Fix W=1 warnings. fix kernel doc and describe arguments.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. The kernel-doc support is partial, add more
descriptions and follow proper syntax
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warning. Add missing arguments
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add logic to check DMIC hardware exists or not on
the platform at runtime.
Add module param for overriding DMIC hardware check
at runtime.
Signed-off-by: Vijendar Mukunda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add the missing unlock before return from function j721e_audio_hw_params()
in the error handling case.
Fixes: 6748d0559059 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Wei Yongjun <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. Fix kernel-doc syntax and add missing parameters.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. fix kernel doc and describe arguments.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. kernel-doc syntax was not followed and missing parameter
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. Kernel-doc syntax was not properly used.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. The kernel-doc support is partial, add more
descriptions and follow proper syntax
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Fix W=1 warnings. There is no kernel-doc here.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Rename the not really descriptive dev_gpio quirk / setting to
gpio1_is_irq, which describes what it actually does.
Signed-off-by: Hans de Goede <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|