aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-08-02nvmet-auth: fix return value check in auth receiveChaitanya Kulkarni1-2/+1
nvmet_auth_challenge() return type is int and currently it uses status variable that is of type u16 in nvmet_execute_auth_receive(). Catch the return value of nvmet_auth_challenge() into int and set the NVME_SC_INTERNAL as status variable before we jump to error. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvmet-auth: fix return value check in auth sendChaitanya Kulkarni1-2/+2
nvmet_setup_auth() return type is int and currently it uses status variable that is of type u16 in nvmet_execute_auth_send(). Catch the return value of nvmet_setup_auth() into int and set the NVME_SC_INTERNAL as status variable before we jump to error. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvmet-auth: fix a couple of spelling mistakesColin Ian King2-2/+2
There are a couple of spelling mistakes in pr_warn and pr_debug messages. Fix them. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvmet: fix a format specifier in nvmet_auth_ctrl_exponentialChristoph Hellwig1-1/+1
dh_keysize is a size_t, use the proper format specifier for printing it. Reported-by: Guenter Roeck <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvmet: don't check for NULL pointer before kfree in nvmet_host_releaseChristoph Hellwig1-2/+2
And add an empty line after the variable declaration. Reported-by: kernel test robot <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-apple: stop casting function pointer signaturesChristoph Hellwig1-6/+15
Casting function pointers breaks control flow enforcement and is generally a horrible coding style. Add two wrappers to get rid of these casts. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-tcp: split nvme_tcp_alloc_tagsetChristoph Hellwig1-41/+41
Split nvme_tcp_alloc_tagset into one helper for the admin tag_set and one for the I/O tag set. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-rdma: split nvme_rdma_alloc_tagsetChristoph Hellwig1-46/+46
Split nvme_rdma_alloc_tagset into one helper for the admin tag_set and one for the I/O tag set. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-pci: split nvme_dev_addChristoph Hellwig1-35/+37
Split nvme_dev_add into a helper to actually allocate the tag set, and one that just update the number of queues. Add a local variable for the tag_set to clean up the code a bit. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-pci: split nvme_alloc_admin_tagsChristoph Hellwig1-29/+31
Split nvme_alloc_admin_tags into a helper to actually allocate the tag set, and one that just restarts the admin queue. Add a local variable for the tag_set to clean up the code a bit. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-pci: print the command name of aborted commandsChristoph Hellwig2-2/+5
To allow for slightly better debugging, print the command name when aborting an command. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-pci: remove useless assignment in nvme_pci_setup_prpsLiu Song1-1/+0
If prp_list is NULL, nvme_unmap_sg will be performed, and the assignment to first_dma is meaningless, so remove it. Signed-off-by: Liu Song <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-auth: uninitialized variable in nvme_auth_transform_key()Dan Carpenter1-9/+16
A couple of the early error gotos call kfree_sensitive(transformed_key); before "transformed_key" has been initialized. Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-auth: fix off by one checksDan Carpenter1-5/+5
The > ARRAY_SIZE() checks need to be >= ARRAY_SIZE() to prevent reading one element beyond the end of the arrays. Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme: define compat_ioctl again to unbreak 32-bit userspace.Nick Bowler2-0/+2
Commit 89b3d6e60550 ("nvme: simplify the compat ioctl handling") removed the initialization of compat_ioctl from the nvme block_device_operations structures. Presumably the expectation was that 32-bit ioctls would be directed through the regular handler but this is not the case: failing to assign .compat_ioctl actually means that the compat case is disabled entirely, and any attempt to submit nvme ioctls from 32-bit userspace fails outright with -ENOTTY. For example: % smartctl -x /dev/nvme0n1 [...] Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Inappropriate ioctl for device The blkdev_compat_ptr_ioctl helper can be used to direct compat calls through the main ioctl handler and makes things work again. Fixes: 89b3d6e60550 ("nvme: simplify the compat ioctl handling") Signed-off-by: Nick Bowler <[email protected]> Reviewed-by: Guixin Liu <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme: don't always build constants.oChristoph Hellwig2-3/+2
The entire content of constants.c if guarded by an ifdef, so switch to just building the file conditionally instead. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme: use command_id instead of req->tag in trace_nvme_complete_rq()Bean Huo1-1/+1
Use command_id instead of req->tag in trace_nvme_complete_rq(), because of commit e7006de6c238 ("nvme: code command_id with a genctr for use authentication after release"), cmd->common.command_id is set to ((genctl & 0xf)< 12 | req->tag), no longer req->tag, which makes cid in trace_nvme_complete_rq and trace_nvme_setup_cmd are not the same. Fixes: e7006de6c238 ("nvme: code command_id with a genctr for use authentication after release") Signed-off-by: Bean Huo <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md-raid10: fix KASAN warningMikulas Patocka1-1/+4
There's a KASAN warning in raid10_remove_disk when running the lvm test lvconvert-raid-reshape.sh. We fix this warning by verifying that the value "number" is valid. BUG: KASAN: slab-out-of-bounds in raid10_remove_disk+0x61/0x2a0 [raid10] Read of size 8 at addr ffff889108f3d300 by task mdX_raid10/124682 CPU: 3 PID: 124682 Comm: mdX_raid10 Not tainted 5.19.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? raid10_remove_disk+0x61/0x2a0 [raid10] kasan_report+0xa8/0xe0 ? raid10_remove_disk+0x61/0x2a0 [raid10] raid10_remove_disk+0x61/0x2a0 [raid10] Buffer I/O error on dev dm-76, logical block 15344, async page read ? __mutex_unlock_slowpath.constprop.0+0x1e0/0x1e0 remove_and_add_spares+0x367/0x8a0 [md_mod] ? super_written+0x1c0/0x1c0 [md_mod] ? mutex_trylock+0xac/0x120 ? _raw_spin_lock+0x72/0xc0 ? _raw_spin_lock_bh+0xc0/0xc0 md_check_recovery+0x848/0x960 [md_mod] raid10d+0xcf/0x3360 [raid10] ? sched_clock_cpu+0x185/0x1a0 ? rb_erase+0x4d4/0x620 ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid10_sync_request+0x36c0/0x36c0 [raid10] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? _raw_spin_unlock_irq+0x11/0x24 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 124495: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 setup_conf+0x140/0x5c0 [raid10] raid10_run+0x4cd/0x740 [raid10] md_run+0x6f9/0x1300 [md_mod] raid_ctr+0x2531/0x4ac0 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 L __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0x9e/0xc0 kvfree_call_rcu+0x84/0x480 timerfd_release+0x82/0x140 __fput+0xfa/0x400 task_work_run+0x80/0xc0 exit_to_user_mode_prepare+0x155/0x160 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x42/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 The buggy address belongs to the object at ffff889108f3d200 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 0 bytes to the right of 256-byte region [ffff889108f3d200, ffff889108f3d300) The buggy address belongs to the physical page: page:000000007ef2a34c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1108f3c head:000000007ef2a34c order:2 compound_mapcount:0 compound_pincount:0 flags: 0x4000000000010200(slab|head|zone=2) raw: 4000000000010200 0000000000000000 dead000000000001 ffff889100042b40 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff889108f3d200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff889108f3d280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff889108f3d300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff889108f3d380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff889108f3d400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md-raid: destroy the bitmap after destroying the threadMikulas Patocka1-1/+1
When we ran the lvm test "shell/integrity-blocksize-3.sh" on a kernel with kasan, we got failure in write_page. The reason for the failure is that md_bitmap_destroy is called before destroying the thread and the thread may be waiting in the function write_page for the bio to complete. When the thread finishes waiting, it executes "if (test_bit(BITMAP_WRITE_ERROR, &bitmap->flags))", which triggers the kasan warning. Note that the commit 48df498daf62 that caused this bug claims that it is neede for md-cluster, you should check md-cluster and possibly find another bugfix for it. BUG: KASAN: use-after-free in write_page+0x18d/0x680 [md_mod] Read of size 8 at addr ffff889162030c78 by task mdX_raid1/5539 CPU: 10 PID: 5539 Comm: mdX_raid1 Not tainted 5.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? write_page+0x18d/0x680 [md_mod] kasan_report+0xa8/0xe0 ? write_page+0x18d/0x680 [md_mod] kasan_check_range+0x13f/0x180 write_page+0x18d/0x680 [md_mod] ? super_sync+0x4d5/0x560 [dm_raid] ? md_bitmap_file_kick+0xa0/0xa0 [md_mod] ? rs_set_dev_and_array_sectors+0x2e0/0x2e0 [dm_raid] ? mutex_trylock+0x120/0x120 ? preempt_count_add+0x6b/0xc0 ? preempt_count_sub+0xf/0xc0 md_update_sb+0x707/0xe40 [md_mod] md_reap_sync_thread+0x1b2/0x4a0 [md_mod] md_check_recovery+0x533/0x960 [md_mod] raid1d+0xc8/0x2a20 [raid1] ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid1_end_read_request+0x2a0/0x2a0 [raid1] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 5522: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 md_bitmap_create+0xa8/0xe80 [md_mod] md_run+0x777/0x1300 [md_mod] raid_ctr+0x249c/0x4a30 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 5680: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x40 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0xf7/0x140 kfree+0x80/0x240 md_bitmap_free+0x1c3/0x280 [md_mod] __md_stop+0x21/0x120 [md_mod] md_stop+0x9/0x40 [md_mod] raid_dtr+0x1b/0x40 [dm_raid] dm_table_destroy+0x98/0x1e0 [dm_mod] __dm_destroy+0x199/0x360 [dm_mod] dev_remove+0x10c/0x160 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: return the allocated devices from md_allocChristoph Hellwig3-49/+30
Two callers of md_alloc want to use the newly allocated devices, so return it instead of letting them find it cumbersomely after the allocation. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-and-tested-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: open code md_probe in autorun_devicesChristoph Hellwig1-1/+1
autorun_devices should not be limited to the controls for the legacy probe on open, so just call md_alloc directly. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-and-tested-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/md/md.c:8208:2-3: Unneeded semicolon Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02remove the sx8 block driverChristoph Hellwig3-1593/+0
This driver is for fairly obscure hardware, and has only seen random drive-by changes after the maintainer stopped working on it in 2005 (about a year and a half after it was introduced). It has some "interesting" block layer interactions, so let's just drop it unless anyone complains. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] [axboe: fix date typo, it was in 2005, not 2015] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: fix build failure for !MODULEStephen Rothwell1-0/+2
After merging the block tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/md/md.c:717:22: error: 'mddev_find' defined but not used [-Werror=unused-function] 717 | static struct mddev *mddev_find(dev_t unit) | ^~~~~~~~~~ cc1: all warnings being treated as errors Caused by commit 4500d5c17910 ("md: simplify md_open") Make mddev_find() available only for non-modular builds. Signed-off-by: Stephen Rothwell <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02raid5: fix duplicate checks for rdev->saved_raid_diskJackie Liu1-2/+1
'first' will always be greater than or equal to 0, it is unnecessary to repeat the 0 check, clean it up. Signed-off-by: Jackie Liu <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: simplify md_openChristoph Hellwig1-27/+15
Now that devices are on the all_mddevs list until the gendisk is freed, there can't be any duplicates. Remove the global list lookup and just grab a reference. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: only delete entries from all_mddevs when the disk is freedChristoph Hellwig2-18/+40
This ensures device names don't get prematurely reused. Instead add a deleted flag to skip already deleted devices in mddev_get and other places that only want to see live mddevs. Reported-by: Logan Gunthorpe <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: stop using for_each_mddev in md_exitChristoph Hellwig1-28/+11
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a reference when we drop the lock and delete the now unused for_each_mddev macro. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: stop using for_each_mddev in md_notify_rebootChristoph Hellwig1-3/+9
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a reference when we drop the lock. Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: stop using for_each_mddev in md_do_syncChristoph Hellwig1-3/+5
Just do a plain list_for_each that only grabs a mddev reference in the case where the thread sleeps and restarts the list iteration. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: factor out the rdev overlaps check from rdev_size_storeChristoph Hellwig1-45/+39
This splits the code into nicely readable chunks and also avoids the refcount inc/dec manipulations. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: rename md_free to md_kobj_releaseChristoph Hellwig1-2/+2
The md_free name is rather misleading, so pick a better one. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: implement ->free_diskChristoph Hellwig1-6/+12
Ensure that all private data is only freed once all accesses are done. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: fix error handling in md_allocChristoph Hellwig1-13/+32
Error handling in md_alloc is a mess. Untangle it to just free the mddev directly before add_disk is called and thus the gendisk is globally visible. After that clear the hold flag and let the mddev_put take care of cleaning up the mddev through the usual mechanisms. Fixes: 5e55e2f5fc95 ("[PATCH] md: convert compile time warnings into runtime warnings") Fixes: 9be68dd7ac0e ("md: add error handling support for add_disk()") Fixes: 7ad1069166c0 ("md: properly unwind when failing to add the kobject in md_alloc") Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md: fix mddev->kobj lifetimeChristoph Hellwig1-6/+4
Once a kobject is initialized, the containing object should not be directly freed. So delay initialization until it is added. Also remove the kobject_del call as the last put will remove the kobject as well. The explicitly delete isn't needed here, and dropping it will simplify further fixes. With this md_free now does not need to check that ->gendisk is non-NULL as it is always set by the time that kobject_init is called on mddev->kobj. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Logan Gunthorpe <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md/raid5: Convert prepare_to_wait() to wait_woken() apiLogan Gunthorpe1-7/+6
raid5_get_active_stripe() can sleep in various situations and it is called by make_stripe_request() while inside the prepare_to_wait()/finish_wait() section. Nested waits like this are not supported. This was noticed while making other changes that add different sleeps to raid5_get_active_stripe() that caused a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP. No ill effects have been noticed with the code as is, but theoretically a nested and here could cause a dead lock so it should be fixed. To fix this, convert the prepare_to_wait() call to use wake_woken() which supports nested sleeps. Link: https://lwn.net/Articles/628628/ Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02md/raid5: Fix sectors_to_do bitmap overflow in raid5_make_request()Logan Gunthorpe1-8/+11
For unaligned IO that have nearly maximum sectors, the number of stripes will end up being one greater than the size of the bitmap. When this happens, the last stripe in the IO will not be processed as it should be, resulting in data corruption. However, this is not normally seen when the backing block devices have 4K physical block sizes since the block layer will split the request before that happens. To fix this increase the bitmap size by one bit and ensure the full number of stripes are checked when calling find_first_bit(). Reported-by: David Sloan <[email protected]> Fixes: 7e55c60acfbb ("md/raid5: Pivot raid5_make_request()") Signed-off-by: Logan Gunthorpe <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02bcache: remove EXPERIMENTAL for Kconfig option 'Asynchronous device ↵Coly Li1-1/+1
registration' The "Asynchronous device registration (EXPERIMENTAL)" Kconfig option is for 2+ years, it is used when registration takes too much time for massive amount of cached data, to avoid udev task timeout during boot time. Many users and products enable this Kconfig option for quite long time (e.g. SUSE Linux) and it works as expected and no issue reported. It is time to remove the "EXPERIMENTAL" tag from this Kconfig item. Signed-off-by: Coly Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nbd: add missing definition of pr_fmtYu Kuai1-2/+4
commit 1243172d5894 ("nbd: use pr_err to output error message") tries to define pr_fmt and use short pr_err() to output error message, however, the definition is missed. This patch also remove existing "nbd:" inside pr_err(). Fixes: 1243172d5894 ("nbd: use pr_err to output error message") Signed-off-by: Yu Kuai <[email protected]> Reviewed-by: Josef Bacik <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02null_blk: fix ida error handling in null_add_dev()Dan Carpenter1-3/+11
There needs to be some error checking if ida_simple_get() fails. Also call ida_free() if there are errors later. Fixes: 94bc02e30fb8 ("nullb: use ida to manage index") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YtEhXsr6vJeoiYhd@kili Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-multipath: refactor nvme_mpath_add_diskJoel Granados3-7/+6
Pass anagrpid as second argument. This is prep patch that allows reusing this function for supporting unknown command sets. Signed-off-by: Joel Granados <[email protected]> Signed-off-by: Kanchan Joshi <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-apple: use nvme core helper to cancel requests in tagsetGuixin Liu1-5/+2
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset instead of same logic code. Signed-off-by: Guixin Liu <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Ruozhu Li <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-pci: use nvme core helper to cancel requests in tagsetGuixin Liu1-4/+2
Use nvme core helper nvme_cancel_tagset and nvme_cancel_admin_tagset instead of same logic code. Signed-off-by: Guixin Liu <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Reviewed-by: Ruozhu Li <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-tcp: use in-capsule data for I/O connectCaleb Sander1-5/+7
Currently, command data is only sent in-capsule on the for admin or I/O commands on queues that indicate support for it. Send fabrics command data in-capsule for I/O queues as well to avoid needing a separate H2CData PDU for the connect command. This is optimization. Without this change, we send the connect command capsule and data in separate PDUs (CapsuleCmd and H2CData), and must wait for the controller to respond with an R2T PDU before sending the H2CData. With the change, we send a single CapsuleCmd PDU that includes the data. This reduces the number of bytes (and likely packets) sent across the network, and simplifies the send state machine handling in the driver. Signed-off-by: Caleb Sander <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvme-rdma: remove timeout for getting RDMA-CM established eventIsrael Rukshin1-8/+5
In case many controllers start error recovery at the same time (i.e., when port is down and up), they may never succeed to reconnect again. This is because the target can't handle all the connect requests at three seconds (the arbitrary value set today). Even if some of the connections are established, when a single queue fails to connect, all the controller's queues are destroyed as well. So, on the following reconnection attempts the number of connect requests may remain the same. To fix this, remove the timeout and wait for RDMA-CM event to abort/complete the connect request. RDMA-CM sends unreachable event when a timeout of ~90 seconds is expired. This approach is used at other RDMA-CM users like SRP and iSER at blocking mode. The commit also renames NVME_RDMA_CONNECT_TIMEOUT_MS to NVME_RDMA_CM_TIMEOUT_MS. Signed-off-by: Israel Rukshin <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Acked-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-08-02null_blk: add configfs variables for 2 optionsVincent Fu2-19/+50
Allow setting via configfs these two options: no_sched shared_tag_bitmap Previously these could only be activated as module parameters. Still missing are: shared_tags timeout requeue init_hctx Signed-off-by: Vincent Fu <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] [axboe: fold in nullb == NULL fix] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02null_blk: add module parameters for 4 optionsVincent Fu2-0/+42
Add as module parameters these options: memory_backed discard mbps cache_size Previously these could only be set via configfs. Still missing is bad_blocks. The kernel test robot found a documentation formatting issue in v1 of this patch. Reported-by: kernel test robot <[email protected]> Signed-off-by: Vincent Fu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02block/rnbd-srv: Replace sess_dev_list with index_idrMd Haris Iqbal2-14/+7
The structure rnbd_srv_session maintains a list and an xarray of rnbd_srv_dev. There is no need to keep both as one of them can serve the purpose. Since one of the places where the lookup of rnbd_srv_dev using rnbd_srv_session is IO path, an xarray would serve us better than a list traversal. Hence remove sess_dev_list from rnbd_srv_session, and replace its uses from xarray. Signed-off-by: Md Haris Iqbal <[email protected]> Reviewed-by: Aleksei Marov <[email protected]> Signed-off-by: Jack Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02block/rnbd-srv: Set keep_id to true after mutex_trylockMd Haris Iqbal1-1/+2
After setting keep_id if the mutex trylock fails, the keep_id stays set for the rest of the sess_dev lifetime. Therefore, set keep_id to true after mutex_trylock succeeds, so that a failure of trylock does'nt touch keep_id. Fixes: b168e1d85cf3 ("block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel") Cc: [email protected] Signed-off-by: Md Haris Iqbal <[email protected]> Signed-off-by: Jack Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-02nvmet-auth: expire authentication sessionsHannes Reinecke3-1/+21
Each authentication step is required to be completed within the KATO interval (or two minutes if not set). So add a workqueue function to reset the transaction ID and the expected next protocol step; this will automatically the next authentication command referring to the terminated authentication. Signed-off-by: Hannes Reinecke <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.