aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-21drm/amdgpu: Workaround harvesting info for some navy flounder boardsAlex Deucher1-0/+4
Some navy flounder boards do not properly mark harvested VCN instances. Fix that here. v2: use IP versions Fixes: 1b592d00b4ac83 ("drm/amdgpu/vcn: remove manual instance setting") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743 Reviewed-and-tested-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdgpu/vcn3.0: remove intermediate variableAlex Deucher1-9/+2
No need to use the id variable, just use the constant plus instance offset directly. Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdgpu/vcn2.0: remove intermediate variableAlex Deucher1-3/+2
No need to use the tmp variable, just use the constant directly. Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdgpu: Consolidate VCN firmware setup codeAlex Deucher6-50/+33
Roughly the same code was present in all VCN versions. Consolidate it into a single function. v2: use AMDGPU_UCODE_ID_VCN + i, check if num_inst >= 2 Signed-off-by: Alex Deucher <[email protected]> Reviewed-by: Leo Liu <[email protected]> Reviewed-by: James Zhu <[email protected]>
2021-10-21drm/amdgpu/vcn3.0: handle harvesting in firmware setupAlex Deucher1-8/+8
Only enable firmware for the instance that is enabled. v2: use AMDGPU_UCODE_ID_VCN + i Fixes: 1b592d00b4ac83 ("drm/amdgpu/vcn: remove manual instance setting") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1743 Reviewed-by: James Zhu <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdkfd: debug message to count successfully migrated pagesPhilip Yang1-0/+21
Not all migrate.cpages returned from migrate_vma_setup can be migrated, for example non anonymous page, or out of device memory. So after migrate_vma_pages returns, add debug message to count pages are successfully migrated which has MIGRATE_PFN_VALID and MIGRATE_PFN_MIGRATE flag set. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdkfd: clarify the origin of cpages returned by migration functionsPhilip Yang1-21/+22
cpages is only updated by migrate_vma_setup. So capture its value at that point to clarify the significance of the number. The next patch will add counting of actually migrated pages after migrate_vma_pages for debug purposes. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amd/amdgpu: add dummy_page_addr to sriov msgJingwen Chen2-1/+3
Add dummy_page_addr to sriov msg for host driver to set GCVM_L2_PROTECTION_DEFAULT_ADDR* registers correctly. v2: should update vf2pf msg instead Signed-off-by: Jingwen Chen <[email protected]> Reviewed-by: Horace Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amdgpu: remove grbm cam index/data operations for gfx v10Huang Rui1-22/+0
PSP firmware will be responsible for applying the GRBM CAM remapping in the production. And the GRBM_CAM_INDEX / GRBM_CAM_DATA registers will be protected by PSP under security policy. So remove it according to the new security policy. Signed-off-by: Huang Rui <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21drm/amd/pm: Enable GPU metrics for One VF modeVignesh Chander1-7/+7
Enable GPU metrics feature in one VF mode. These are only possible in one VF mode because the VF is dedicated in that case. Signed-off-by: Vignesh Chander <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-10-21Merge branch 'ucount-fixes-for-v5.15' of ↵Linus Torvalds5-24/+69
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ucounts fixes from Eric Biederman: "There has been one very hard to track down bug in the ucount code that we have been tracking since roughly v5.14 was released. Alex managed to find a reliable reproducer a few days ago and then I was able to instrument the code and figure out what the issue was. It turns out the sigqueue_alloc single atomic operation optimization did not play nicely with ucounts multiple level rlimits. It turned out that either sigqueue_alloc or sigqueue_free could be operating on multiple levels and trigger the conditions for the optimization on more than one level at the same time. To deal with that situation I have introduced inc_rlimit_get_ucounts and dec_rlimit_put_ucounts that just focuses on the optimization and the rlimit and ucount changes. While looking into the big bug I found I couple of other little issues so I am including those fixes here as well. When I have time I would very much like to dig into process ownership of the shared signal queue and see if we could pick a single owner for the entire queue so that all of the rlimits can count to that owner. That should entirely remove the need to call get_ucounts and put_ucounts in sigqueue_alloc and sigqueue_free. It is difficult because Linux unlike POSIX supports setuid that works on a single thread" * 'ucount-fixes-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyring ucounts: Proper error handling in set_cred_ucounts ucounts: Pair inc_rlimit_ucounts with dec_rlimit_ucoutns in commit_creds ucounts: Fix signal ucount refcounting
2021-10-21Merge tag 'net-5.15-rc7' of ↵Linus Torvalds92-301/+913
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter, and can. We'll have one more fix for a socket accounting regression, it's still getting polished. Otherwise things look fine. Current release - regressions: - revert "vrf: reset skb conntrack connection on VRF rcv", there are valid uses for previous behavior - can: m_can: fix iomap_read_fifo() and iomap_write_fifo() Current release - new code bugs: - mlx5: e-switch, return correct error code on group creation failure Previous releases - regressions: - sctp: fix transport encap_port update in sctp_vtag_verify - stmmac: fix E2E delay mechanism (in PTP timestamping) Previous releases - always broken: - netfilter: ip6t_rt: fix out-of-bounds read of ipv6_rt_hdr - netfilter: xt_IDLETIMER: fix out-of-bound read caused by lack of init - netfilter: ipvs: make global sysctl read-only in non-init netns - tcp: md5: fix selection between vrf and non-vrf keys - ipv6: count rx stats on the orig netdev when forwarding - bridge: mcast: use multicast_membership_interval for IGMPv3 - can: - j1939: fix UAF for rx_kref of j1939_priv abort sessions on receiving bad messages - isotp: fix TX buffer concurrent access in isotp_sendmsg() fix return error on FC timeout on TX path - ice: fix re-init of RDMA Tx queues and crash if RDMA was not inited - hns3: schedule the polling again when allocation fails, prevent stalls - drivers: add missing of_node_put() when aborting for_each_available_child_of_node() - ptp: fix possible memory leak and UAF in ptp_clock_register() - e1000e: fix packet loss in burst mode on Tiger Lake and later - mlx5e: ipsec: fix more checksum offload issues" * tag 'net-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) usbnet: sanity check for maxpacket net: enetc: make sure all traffic classes can send large frames net: enetc: fix ethtool counter name for PM0_TERR ptp: free 'vclock_index' in ptp_clock_release() sfc: Don't use netif_info before net_device setup sfc: Export fibre-specific supported link modes net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flags net/mlx5e: IPsec: Fix a misuse of the software parser's fields net/mlx5e: Fix vlan data lost during suspend flow net/mlx5: E-switch, Return correct error code on group creation failure net/mlx5: Lag, change multipath and bonding to be mutually exclusive ice: Add missing E810 device ids igc: Update I226_K device ID e1000e: Fix packet loss on Tiger Lake and later e1000e: Separate TGP board type from SPT ptp: Fix possible memory leak in ptp_clock_register() net: stmmac: Fix E2E delay mechanism nfc: st95hf: Make spi remove() callback return zero net: hns3: disable sriov before unload hclge layer net: hns3: fix vf reset workqueue cannot exit ...
2021-10-21Merge tag 'powerpc-5.15-5' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a bug exposed by a previous fix, where running guests with certain SMT topologies could crash the host on Power8. - Fix atomic sleep warnings when re-onlining CPUs, when PREEMPT is enabled. Thanks to Nathan Lynch, Srikar Dronamraju, and Valentin Schneider. * tag 'powerpc-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/smp: do not decrement idle task preempt count in CPU offline powerpc/idle: Don't corrupt back chain when going idle
2021-10-21drm/msm/dsi: fix wrong type in msm_dsi_hostJessica Zhang1-12/+12
Change byte_clk_rate, pixel_clk_rate, esc_clk_rate, and src_clk_rate from u32 to unsigned long, since clk_get_rate() returns an unsigned long. Fixes: a6bcddbc2ee1 ("drm/msm: dsi: Handle dual-channel for 6G as well") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jessica Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-21drm/msm: Fix potential NULL dereference in DPU SSPPJessica Zhang1-3/+5
Move initialization of sblk in _sspp_subblk_offset() after NULL check to avoid potential NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jessica Zhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-21dt-bindings: msm: add DT bindings for sc7280Krishna Manikandan1-0/+232
MSM Mobile Display Subsystem (MDSS) encapsulates sub-blocks like DPU display controller, DSI, EDP etc. Add required DPU device tree bindings for SC7280. Signed-off-by: Krishna Manikandan <[email protected]> Changes in v2: - Drop target from description (Stephen Boyd) - Drop items from compatible (Stephen Boyd) - Add clock names one per line for readability (Stephen Boyd) - Use correct indendation (Stephen Boyd) Reviewed-by: Stephen Boyd <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-21dt-bindings: drm/msm/gpu: convert to YAMLDavid Heidelberg2-157/+288
Conversion of text binding for Adreno GPU to the YAML format. Signed-off-by: David Heidelberg <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-22Merge tag 'drm-intel-gt-next-2021-10-21' of ↵Dave Airlie52-764/+3231
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Expose multi-LRC submission interface Similar to the bonded submission interface but simplified. Comes with GuC only implementation for now. See kerneldoc for more details. Userspace changes: https://github.com/intel/media-driver/pull/1252 - Expose logical engine instance to user Needed by the multi-LRC submission interface for GuC Userspace changes: https://github.com/intel/media-driver/pull/1252 Driver Changes: - Fix blank screen booting crashes when CONFIG_CC_OPTIMIZE_FOR_SIZE=y (Hugh) - Add support for multi-LRC submission in the GuC backend (Matt B) - Add extra cache flushing before making pages userspace visible (Matt A, Thomas) - Mark internal GPU object pages dirty so they will be flushed properly (Matt A) - Move remaining debugfs interfaces i915_wedged/i915_forcewake_user into gt (Andi) - Replace the unconditional clflushes with drm_clflush_virt_range() (Ville) - Remove IS_ACTIVE macro completely (Lucas) - Improve kerneldocs for cache_dirty (Matt A) - Add missing includes (Lucas) - Selftest improvements (Matt R, Ran, Matt A) Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-22Revert "drm/ast: Add detect function support"Kim Phillips1-17/+1
This reverts commit aae74ff9caa8de9a45ae2e46068c417817392a26, since it prevents my AMD Milan system from booting, with: [ 27.189558] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 27.197506] #PF: supervisor write access in kernel mode [ 27.203333] #PF: error_code(0x0002) - not-present page [ 27.209064] PGD 0 P4D 0 [ 27.211885] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 27.216744] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.0-rc6+ #15 [ 27.223928] Hardware name: AMD Corporation ETHANOL_X/ETHANOL_X, BIOS RXM1006B 08/20/2021 [ 27.232955] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.238397] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.259350] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.265176] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.273134] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.281084] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.289043] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.297002] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.304961] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.313988] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.320396] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.328346] PKRU: 55555554 [ 27.331359] Call Trace: [ 27.334073] <IRQ> [ 27.336314] ? __queue_work+0x420/0x420 [ 27.340589] ? lapic_next_event+0x21/0x30 [ 27.345060] ? clockevents_program_event+0x8f/0xe0 [ 27.350402] __do_softirq+0xfb/0x2db [ 27.354388] irq_exit_rcu+0x98/0xd0 [ 27.358275] sysvec_apic_timer_interrupt+0xac/0xd0 [ 27.363620] </IRQ> [ 27.365955] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 27.371685] RIP: 0010:cpuidle_enter_state+0xcc/0x390 [ 27.377292] Code: 3d 01 79 0a 50 e8 44 ed 77 ff 49 89 c6 0f 1f 44 00 00 31 ff e8 f5 f8 77 ff 80 7d d7 00 0f 85 e6 01 00 00 fb 66 0f 1f 44 00 00 <45> 85 ff 0f 88 17 01 00 00 49 63 c7 4c 2b 75 c8 48 8d 14 40 48 8d [ 27.398243] RSP: 0018:ffffffffb0e03dc8 EFLAGS: 00000246 [ 27.404069] RAX: ffffa0c44de00000 RBX: 0000000000000001 RCX: 000000000000001f [ 27.412028] RDX: 0000000000000000 RSI: ffffffffb0bafc1f RDI: ffffffffb0bbdb81 [ 27.419986] RBP: ffffffffb0e03e00 R08: 00000006549f8f3f R09: ffffffffb1065200 [ 27.427935] R10: ffffa0c44de27ae4 R11: ffffa0c44de27ac4 R12: ffffa0c5634cb000 [ 27.435894] R13: ffffffffb1065200 R14: 00000006549f8f3f R15: 0000000000000001 [ 27.443854] ? cpuidle_enter_state+0xbb/0x390 [ 27.448712] cpuidle_enter+0x2e/0x40 [ 27.452695] call_cpuidle+0x23/0x40 [ 27.456584] do_idle+0x1f0/0x270 [ 27.460181] cpu_startup_entry+0x20/0x30 [ 27.464553] rest_init+0xd4/0xe0 [ 27.468149] arch_call_rest_init+0xe/0x1b [ 27.472619] start_kernel+0x6bc/0x6e2 [ 27.476764] x86_64_start_reservations+0x24/0x26 [ 27.481912] x86_64_start_kernel+0x75/0x79 [ 27.486477] secondary_startup_64_no_verify+0xb0/0xbb [ 27.492111] Modules linked in: kvm_amd(+) kvm ipmi_si(+) ipmi_devintf rapl wmi_bmof ipmi_msghandler input_leds ccp k10temp mac_hid sch_fq_codel msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm drm_kms_helper crct10dif_pclmul crc32_pclmul ghash_clmulni_intel syscopyarea aesni_intel sysfillrect crypto_simd sysimgblt fb_sys_fops cryptd hid_generic cec nvme ahci usbhid drm e1000e nvme_core hid libahci i2c_piix4 wmi [ 27.551789] CR2: 0000000000000000 [ 27.555482] ---[ end trace 897987dfe93dccc6 ]--- [ 27.560630] RIP: 0010:run_timer_softirq+0x38b/0x4a0 [ 27.566069] Code: 4c 89 f7 e8 37 27 ac 00 49 c7 46 08 00 00 00 00 49 8b 04 24 48 85 c0 74 71 4d 8b 3c 24 4d 89 7e 08 66 90 49 8b 07 49 8b 57 08 <48> 89 02 48 85 c0 74 04 48 89 50 08 49 8b 77 18 41 f6 47 22 20 4c [ 27.587021] RSP: 0018:ffffc42d00003ee8 EFLAGS: 00010086 [ 27.592848] RAX: dead000000000122 RBX: 0000000000000000 RCX: 0000000000000101 [ 27.600808] RDX: 0000000000000000 RSI: 0000000000000087 RDI: 0000000000000001 [ 27.608765] RBP: ffffc42d00003f70 R08: 0000000000000000 R09: 00000000000003eb [ 27.616716] R10: ffffa0860cb300d0 R11: ffffa0c44de290b0 R12: ffffc42d00003ef8 [ 27.624673] R13: 00000000fffef200 R14: ffffa0c44de18dc0 R15: ffffa0867a882350 [ 27.632624] FS: 0000000000000000(0000) GS:ffffa0c44de00000(0000) knlGS:0000000000000000 [ 27.641650] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 27.648159] CR2: 0000000000000000 CR3: 000000014569c001 CR4: 0000000000770ef0 [ 27.656119] PKRU: 55555554 [ 27.659133] Kernel panic - not syncing: Fatal exception in interrupt [ 29.030411] Shutting down cpus with NMI [ 29.034699] Kernel Offset: 0x2e600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 29.046790] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Since unreliable, found by bisecting for KASAN's use-after-free in enqueue_timer+0x4f/0x1e0, where the timer callback is called. Reported-by: Kim Phillips <[email protected]> Signed-off-by: Kim Phillips <[email protected]> Fixes: aae74ff9caa8 ("drm/ast: Add detect function support") Link: https://lore.kernel.org/lkml/[email protected]/ Cc: Ainux <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Chuck Lever III <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jon Grimm <[email protected]> Cc: dri-devel <[email protected]> Cc: linux-kernel <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-22Merge tag 'drm-intel-next-2021-10-15' of ↵Dave Airlie57-1607/+1974
git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - No Functional change, but a clarification around I915_TILING values (Matt). Driver Changes: - Changes around async flip VT-d w/a (Ville) - Delete bogus NULL check in intel_ddi_encoder_destroy (Dan) - DP link training improvements and DP per-lane driver settings (Ville) - Free the returned object of acpi_evaluate_dsm (Zenghui) - Fixes and improvements around DP's UHBR and MST (Jani) - refactor plane config + pin out (Dave) - remove unused include in intel_dsi_vbt.c (Lucas) - some code clean up (Lucas, Jani) - gracefully disable dual eDP (Jani) - Remove memory frequency calculation (Jose) - Fix oops on platforms w/o hpd support (Ville) - Clean up PXP Kconfig info (Rodrigo) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YWnMORrixyw90O3/@intel.com
2021-10-22Merge tag 'drm-misc-fixes-2021-10-21-1' of ↵Dave Airlie9-24/+123
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-fixes for v5.15-rc7: - Rebased, to remove vc4 patches. - Fix mxsfb crash on unload. - Use correct sync parameters for Feixin K101-IM2BYL02. - Assorted kmb modeset/atomic fixes. Signed-off-by: Dave Airlie <[email protected]> From: Maarten Lankhorst <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-10-22Merge tag 'drm-msm-fixes-2021-10-18' of ↵Dave Airlie3-1/+13
https://gitlab.freedesktop.org/drm/msm into drm-fixes One more fix for v5.15, to work around a power stability issue on a630 (and possibly others) Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs1WPLthmd=ToDcEHm=u-7O38RAVJ2XwRoS8xPmC520vg@mail.gmail.com
2021-10-21drm/msm/dpu: Add CRC support for DPUJessica Zhang5-5/+239
Add CRC support to DPU, which is currently not supported by this driver. Only supports CRC for CRTC for now, but will extend support to other blocks later on. Changes in v2: - Added kfree() calls for return paths in dpu_crtc_get_crc() - Propogated error code for dpu_crtc_get_crc() - Renamed skip_count - Removed dpu_crtc_is_valid_crc_source() - Removed wait for commit in dpu_crtc_set_crc_source() - Moved crc_source from struct dpu_crtc to struct dpu_crtc_state - Moved CRC register constants from dpu_hw_util.h to dpu_hw_lm.c Validated with IGT kms_pipe_crc_basic, and kms_cursor_crc Test: kms_pipe_crc_basic Subtests Passed: - bad-source - read-crc-pipe-A - read-crc-pipe-A-frame-sequence - nonblocking-crc-pipe-A - nonblocking-crc-pipe-A-frame-sequence - disable-crc-after-crtc-pipe-A[1] - compare-crc-sanitycheck-pipe-A[1] Rest skipped Test: kms_cursor_crc Subtests Passed: - pipe-A-cursor-size-change - pipe-A-cursor-alpha-opaque - pipe-A-cursor-alpha-transparent Subtests Failed: - pipe-A-cursor-dpms - pipe-A-cursor-*-onscreen - pipe-A-cursor-*-offscreen Rest skipped Tested on Qualcomm RB3 (debian, sdm845), Qualcomm RB5 (debian, qrb5165) Reported-by: kernel test robot <[email protected]> Signed-off-by: Jessica Zhang <[email protected]> [1] Skipped on RB5 due to issue related to DPMS. Planning to upload a fix for this in the future. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-21io_uring: apply worker limits to previous usersPavel Begunkov1-0/+18
Another change to the API io-wq worker limitation API added in 5.15, apply the limit to all prior users that already registered a tctx. It may be confusing as it's now, in particular the change covers the following 2 cases: TASK1 | TASK2 _________________________________________________ ring = create() | | limit_iowq_workers() *not limited* | TASK1 | TASK2 _________________________________________________ ring = create() | | issue_requests() limit_iowq_workers() | | *not limited* A note on locking, it's safe to traverse ->tctx_list as we hold ->uring_lock, but do that after dropping sqd->lock to avoid possible problems. It's also safe to access tctx->io_wq there because tasks kill it only after removing themselves from tctx_list, see io_uring_cancel_generic() -> io_uring_clean_tctx() Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/d6e09ecc3545e4dc56e43c906ee3d71b7ae21bed.1634818641.git.asml.silence@gmail.com Reviewed-by: Hao Xu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-10-21drm/msm/hdmi: use bulk regulator APIDmitry Baryshkov5-77/+40
Switch to using bulk regulator API instead of hand coding loops. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> Reviewed-by: Abhinav Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2021-10-21KVM: SEV: Flush cache on non-coherent systems before RECEIVE_UPDATE_DATAMasahiro Kozuka1-0/+7
Flush the destination page before invoking RECEIVE_UPDATE_DATA, as the PSP encrypts the data with the guest's key when writing to guest memory. If the target memory was not previously encrypted, the cache may contain dirty, unecrypted data that will persist on non-coherent systems. Fixes: 15fb7de1a7f5 ("KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command") Cc: [email protected] Cc: Peter Gonda <[email protected]> Cc: Marc Orr <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Brijesh Singh <[email protected]> Signed-off-by: Masahiro Kozuka <[email protected]> [sean: converted bug report to changelog] Signed-off-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-10-21drm/msm: Fix missing include files in msm_gem_shrinker.cYanteng Si1-0/+2
Include linux/vmalloc.h to fix below errors: error: implicit declaration of function 'register_vmap_purge_notifier' error: implicit declaration of function 'unregister_vmap_purge_notifier' Signed-off-by: Yanteng Si <[email protected]> Link: https://lore.kernel.org/r/f270502946fa411cc85c18fc252e5ddbeaf9c2f5.1634200323.git.siyanteng@loongson.cn Signed-off-by: Rob Clark <[email protected]>
2021-10-21drm/msm: Fix missing include files in msm_gem.cYanteng Si1-0/+1
Include linux/vmalloc.h to fix below errors: error: implicit declaration of function 'vmap' Signed-off-by: Yanteng Si <[email protected]> Link: https://lore.kernel.org/r/15f30165e94574e4cd7c4da9f9c6fd1e320d4d8e.1634200323.git.siyanteng@loongson.cn Signed-off-by: Rob Clark <[email protected]>
2021-10-21KVM: MMU: Reset mmu->pkru_mask to avoid stale dataChenyi Qiang1-3/+3
When updating mmu->pkru_mask, the value can only be added but it isn't reset in advance. This will make mmu->pkru_mask keep the stale data. Fix this issue. Fixes: 2d344105f57c ("KVM, pkeys: introduce pkru_mask to cache conditions") Signed-off-by: Chenyi Qiang <[email protected]> Message-Id: <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-10-21usbnet: sanity check for maxpacketOliver Neukum1-0/+4
maxpacket of 0 makes no sense and oopses as we need to divide by it. Give up. V2: fixed typo in log and stylistic issues Signed-off-by: Oliver Neukum <[email protected]> Reported-by: [email protected] Reviewed-by: Johan Hovold <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-21net: enetc: make sure all traffic classes can send large framesVladimir Oltean1-1/+4
The enetc driver does not implement .ndo_change_mtu, instead it configures the MAC register field PTC{Traffic Class}MSDUR[MAXSDU] statically to a large value during probe time. The driver used to configure only the max SDU for traffic class 0, and that was fine while the driver could only use traffic class 0. But with the introduction of mqprio, sending a large frame into any other TC than 0 is broken. This patch fixes that by replicating per traffic class the static configuration done in enetc_configure_port_mac(). Fixes: cbe9e835946f ("enetc: Enable TC offloading with mqprio") Reported-by: Richie Pearn <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: <Claudiu Manoil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-21net: enetc: fix ethtool counter name for PM0_TERRVladimir Oltean1-1/+1
There are two counters named "MAC tx frames", one of them is actually incorrect. The correct name for that counter should be "MAC tx error frames", which is symmetric to the existing "MAC rx error frames". Fixes: 16eb4c85c964 ("enetc: Add ethtool statistics") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: <Claudiu Manoil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-21MAINTAINERS: Add Dave Hansen to the x86 maintainer teamThomas Gleixner1-0/+1
Dave is already listed as x86/mm maintainer, has a profund knowledge of the x86 architecture in general and a good taste in terms of kernel programming in general. Add him as a full x86 maintainer with all rights and duties. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Borislav Petkov <[email protected]> Acked-by: Andy Lutomirski <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/87zgr3flq7.ffs@tglx
2021-10-21ptp: free 'vclock_index' in ptp_clock_release()Yang Yingliang1-4/+1
'vclock_index' is accessed from sysfs, it shouled be freed in release function, so move it from ptp_clock_unregister() to ptp_clock_release(). Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-21sfc: Don't use netif_info before net_device setupErik Ekman2-3/+3
Use pci_info instead to avoid unnamed/uninitialized noise: [197088.688729] sfc 0000:01:00.0: Solarflare NIC detected [197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F [197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed [197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before net_device is registered") from Heiner Kallweit. Signed-off-by: Erik Ekman <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-21sfc: Export fibre-specific supported link modesErik Ekman1-11/+26
The 1/10GbaseT modes were set up for cards with SFP+ cages in 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections"). 10GbaseT was likely used since no 10G fibre mode existed. The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144 ("net: ethtool: add support for 1000BaseX and missing 10G link modes") shortly thereafter. The user guide available at https://support-nic.xilinx.com/wp/drivers lists support for the following cable and transceiver types in section 2.9: - QSFP28 100G Direct Attach Cables - QSFP28 100G SR Optical Transceivers (with SR4 modules listed) - SFP28 25G Direct Attach Cables - SFP28 25G SR Optical Transceivers - QSFP+ 40G Direct Attach Cables - QSFP+ 40G Active Optical Cables - QSFP+ 40G SR4 Optical Transceivers - QSFP+ to SFP+ Breakout Direct Attach Cables - QSFP+ to SFP+ Breakout Active Optical Cables - SFP+ 10G Direct Attach Cables - SFP+ 10G SR Optical Transceivers - SFP+ 10G LR Optical Transceivers - SFP 1000BASE‐T Transceivers - 1G Optical Transceivers (From user guide issue 28. Issue 16 which also includes older cards like SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.) Regarding SFP+ 10GBASE‐T transceivers the latest guide says: "Solarflare adapters do not support 10GBASE‐T transceiver modules." Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR). Before: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 10000baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes After: $ ethtool ext Settings for ext: Supported ports: [ FIBRE ] Supported link modes: 1000baseT/Full 1000baseX/Full 10000baseCR/Full 10000baseSR/Full 10000baseLR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Link partner advertised link modes: Not reported Link partner advertised pause frame use: No Link partner advertised auto-negotiation: No Link partner advertised FEC modes: Not reported Speed: 1000Mb/s Duplex: Full Auto-negotiation: off Port: FIBRE PHYAD: 255 Transceiver: internal Supports Wake-on: g Wake-on: d Current message level: 0x000020f7 (8439) drv probe link ifdown ifup rx_err tx_err hw Link detected: yes Signed-off-by: Erik Ekman <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller8-52/+164
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter fixes for net: 1) Crash due to missing initialization of timer data in xt_IDLETIMER, from Juhee Kang. 2) NF_CONNTRACK_SECMARK should be bool in Kconfig, from Vegard Nossum. 3) Skip netdev events on netns removal, from Florian Westphal. 4) Add testcase to show port shadowing via UDP, also from Florian. 5) Remove pr_debug() code in ip6t_rt, this fixes a crash due to unsafe access to non-linear skbuff, from Xin Long. 6) Make net/ipv4/vs/debug_level read-only from non-init netns, from Antoine Tenart. 7) Remove bogus invocation to bash in selftests/netfilter/nft_flowtable.sh also from Florian. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-21Merge tag 'mlx5-fixes-2021-10-20' of ↵David S. Miller12-55/+85
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-fixes-2021-10-20 ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-21Merge branch '1GbE' of ↵David S. Miller8-25/+68
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-10-20 This series contains updates to e1000e, igc, and ice drivers. Sasha fixes an issue with dropped packets on Tiger Lake platforms for e1000e and corrects a device ID for igc. Tony adds missing E810 device IDs for ice. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-21drm/kmb: Enable ADV bridge after modesetAnitha Chrisanthus3-8/+10
On KMB, ADV bridge must be programmed and powered on prior to MIPI DSI HW initialization. v2: changed to atomic_bridge_chain_enable (Sam) Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Co-developed-by: Edmund Dea <[email protected]> Signed-off-by: Edmund Dea <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Acked-by: Sam Ravnborg <[email protected]> Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/kmb: Corrected typo in handle_lcd_irqAnitha Chrisanthus1-1/+1
Check for Overflow bits for layer3 in the irq handler. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/kmb: Disable change of plane parametersEdmund Dea3-1/+49
Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration. v2: removed memset disp_cfg as it is already zero. Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/kmb: Remove clearing DPHY regsEdmund Dea1-5/+0
Don't clear the shared DPHY registers common to MIPI Rx and MIPI Tx during DSI initialization since this was causing MIPI Rx reset. Rest of the writes are bitwise, so will not affect Mipi Rx side. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Edmund Dea <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/kmb: Limit supported mode to 1080pAnitha Chrisanthus2-1/+42
KMB only supports single resolution(1080p), this commit checks for 1920x1080x60 or 1920x1080x59 in crtc_mode_valid. Also, modes with vfp < 4 are not supported in KMB display. This change prunes display modes with vfp < 4. v2: added vfp check Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Co-developed-by: Edmund Dea <[email protected]> Signed-off-by: Edmund Dea <[email protected]> Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link:https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/kmb: Work around for higher system clockAnitha Chrisanthus1-1/+10
Use a different value for system clock offset in the ppl/llp ratio calculations for clocks higher than 500 Mhz. Fixes: 98521f4d4b4c ("drm/kmb: Mipi DSI part of the display driver") Signed-off-by: Anitha Chrisanthus <[email protected]> Acked-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm/panel: ilitek-ili9881c: Fix sync for Feixin K101-IM2BYL02 panelDan Johansen1-6/+6
This adjusts sync values according to the datasheet Fixes: 1c243751c095 ("drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panel") Co-developed-by: Marius Gripsgard <[email protected]> Signed-off-by: Dan Johansen <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21drm: mxsfb: Fix NULL pointer dereference crash on unloadMarek Vasut1-1/+5
The mxsfb->crtc.funcs may already be NULL when unloading the driver, in which case calling mxsfb_irq_disable() via drm_irq_uninstall() from mxsfb_unload() leads to NULL pointer dereference. Since all we care about is masking the IRQ and mxsfb->base is still valid, just use that to clear and mask the IRQ. Fixes: ae1ed00932819 ("drm: mxsfb: Stop using DRM simple display pipeline helper") Signed-off-by: Marek Vasut <[email protected]> Cc: Daniel Abrecht <[email protected]> Cc: Emil Velikov <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Stefan Agner <[email protected]> Signed-off-by: Sam Ravnborg <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Maarten Lankhorst <[email protected]>
2021-10-21fuse: clean up error exits in fuse_fill_super()Miklos Szeredi1-6/+2
Instead of "goto err", return error directly, since there's no error cleanup to do now. Signed-off-by: Miklos Szeredi <[email protected]>
2021-10-21fuse: always initialize sb->s_fs_infoMiklos Szeredi1-25/+25
Syzkaller reports a null pointer dereference in fuse_test_super() that is caused by sb->s_fs_info being NULL. This is due to the fact that fuse_fill_super() is initializing s_fs_info, which is too late, it's already on the fs_supers list. The initialization needs to be done in sget_fc() with the sb_lock held. Move allocation of fuse_mount and fuse_conn from fuse_fill_super() into fuse_get_tree(). After this ->kill_sb() will always be called with non-NULL ->s_fs_info, hence fuse_mount_destroy() can drop the test for non-NULL "fm". Reported-by: [email protected] Fixes: 5d5b74aa9c76 ("fuse: allow sharing existing sb") Signed-off-by: Miklos Szeredi <[email protected]>
2021-10-21fuse: clean up fuse_mount destructionMiklos Szeredi2-19/+7
1. call fuse_mount_destroy() for open coded variants 2. before deactivate_locked_super() don't need fuse_mount destruction since that will now be done (if ->s_fs_info is not cleared) 3. rearrange fuse_mount setup in fuse_get_tree_submount() so that the regular pattern can be used Signed-off-by: Miklos Szeredi <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.