| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The code in vc_do_resize() bounds the memory allocation size to avoid
exceeding MAX_ORDER down the kzalloc() call chain and generating a
runtime warning triggerable from user space. However, not only is it
unwise to use a literal value here, but MAX_ORDER may also be
configurable based on CONFIG_FORCE_MAX_ZONEORDER.
Let's use KMALLOC_MAX_SIZE instead.
Note that prior commit bb1107f7c605 ("mm, slab: make sure that
KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value
could not be relied upon.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]> # v4.10+
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
commit 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit")
breaks the UART on Cubieboard7-lite (based on S700 SoC), This is due to the
fact that generic clk routine clk_disable_unused() disables the gate clks,
and that in turns disables OWL UART (but UART driver never enables it). To
prove this theory, Andre suggested to use "clk_ignore_unused" in kernel
commnd line and it worked (Kernel happily lands into RAMFS world :)).
This commit fix this up by adding clk_prepare_enable().
Fixes: 8ba92cf59335 ("arm64: dts: actions: s700: Add Clock Management Unit")
Signed-off-by: Amit Singh Tomar <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Even if the actual screen size is bounded in vc_do_resize(), the unicode
buffer is still a little more than twice the size of the glyph buffer
and may exceed MAX_ORDER down the kmalloc() path. This can be triggered
from user space.
Since there is no point having a physically contiguous buffer here,
let's avoid the above issue as well as reducing pressure on high order
allocations by using vmalloc() instead.
Signed-off-by: Nicolas Pitre <[email protected]>
Cc: <[email protected]>
Acked-by: Sam Ravnborg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Change a bunch of arguments of wrapper functions which pass signed
integer to an unsigned integer which might cause undefined behaviors
when sign integer overflow.
Signed-off-by: Changming Liu <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/BL0PR06MB45482D71EA822D75A0E60A2EE5D50@BL0PR06MB4548.namprd06.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Cyril Roelandt reports that his JMicron JMS566 USB-SATA bridge fails
to handle WRITE commands with the FUA bit set, even though it claims
to support FUA. (Oddly enough, a later version of the same bridge,
version 2.03 as opposed to 1.14, doesn't claim to support FUA. Also
oddly, the bridge _does_ support FUA when using the UAS transport
instead of the Bulk-Only transport -- but this device was blacklisted
for uas in commit bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron
SATA enclosure") for apparently unrelated reasons.)
This patch adds a usb-storage unusual_devs entry with the BROKEN_FUA
flag. This allows the bridge to work properly with usb-storage.
Reported-and-tested-by: Cyril Roelandt <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
first for high speed devices")
Commit bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for
high speed devices") changed the way the hub driver enumerates
high-speed devices. Instead of using the "new" enumeration scheme
first and switching to the "old" scheme if that doesn't work, we start
with the "old" scheme. In theory this is better because the "old"
scheme is slightly faster -- it involves resetting the device only
once instead of twice.
However, for a long time Windows used only the "new" scheme. Zeng Tao
said that Windows 8 and later use the "old" scheme for high-speed
devices, but apparently there are some devices that don't like it.
William Bader reports that the Ricoh webcam built into his Sony Vaio
laptop not only doesn't enumerate under the "old" scheme, it gets hung
up so badly that it won't then enumerate under the "new" scheme! Only
a cold reset will fix it.
Therefore we will revert the commit and go back to trying the "new"
scheme first for high-speed devices.
Reported-and-tested-by: William Bader <[email protected]>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207219
Signed-off-by: Alan Stern <[email protected]>
Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
CC: Zeng Tao <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit 8099f58f1ecd ("USB: hub: Don't record a connect-change event
during reset-resume") wasn't very well conceived. The problem it
tried to fix was that if a connect-change event occurred while the
system was asleep (such as a device disconnecting itself from the bus
when it is suspended and then reconnecting when it resumes)
requiring a reset-resume during the system wakeup transition, the hub
port's change_bit entry would remain set afterward. This would cause
the hub driver to believe another connect-change event had occurred
after the reset-resume, which was wrong and would lead the driver to
send unnecessary requests to the device (which could interfere with a
firmware update).
The commit tried to fix this by not setting the change_bit during the
wakeup. But this was the wrong thing to do; it means that when a
device is unplugged while the system is asleep, the hub driver doesn't
realize anything has happened: The change_bit flag which would tell it
to handle the disconnect event is clear.
The commit needs to be reverted and the problem fixed in a different
way. Fortunately an alternative solution was noted in the commit's
Changelog: We can continue to set the change_bit entry in
hub_activate() but then clear it when a reset-resume occurs. That way
the the hub driver will see the change_bit when a device is
disconnected but won't see it when the device is still present.
That's what this patch does.
Reported-and-tested-by: Peter Chen <[email protected]>
Signed-off-by: Alan Stern <[email protected]>
Fixes: 8099f58f1ecd ("USB: hub: Don't record a connect-change event during reset-resume")
Tested-by: Paul Zimmerman <[email protected]>
CC: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES,
BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT
Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode.
Fixes an issue that preamble mode is not being updated correctly.
Fixes: c12603576e06 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
comedi_open() invokes comedi_dev_get_from_minor(), which returns a
reference of the COMEDI device to "dev" with increased refcount.
When comedi_open() returns, "dev" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
comedi_open(). When "cfp" allocation is failed, the refcnt increased by
comedi_dev_get_from_minor() is not decreased, causing a refcnt leak.
Fix this issue by calling comedi_dev_put() on this error path when "cfp"
allocation is failed.
Fixes: 20f083c07565 ("staging: comedi: prepare support for per-file read and write subdevices")
Signed-off-by: Xiyu Yang <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The problem is that the group key was saved as VNT_KEY_DEFAULTKEY
was over written by the VNT_KEY_GROUP_ADDRESS index.
mac80211 could not clear the mac_addr in the default key.
The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as
VNT_KEY_GROUP_ADDRESS.
mac80211 can clear any key using vnt_mac_disable_keyentry.
Fixes: f9ef05ce13e4 ("staging: vt6656: Fix pairwise key for non station modes")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The drivers TBTT counter is not synchronized with mac80211 timestamp.
Reorder the functions and use vnt_update_next_tbtt to do the final
synchronize.
Fixes: c15158797df6 ("staging: vt6656: implement TSF counter")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
mac80211/users control whether multicast is on or off don't enable it by default.
Fixes an issue when multicast/broadcast is always on allowing other beacons through
in power save.
Fixes: db8f37fa3355 ("staging: vt6656: mac80211 conversion: main_usb add functions...")
Cc: stable <[email protected]>
Signed-off-by: Malcolm Priestley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
HD-audio codec driver applies a tricky procedure to forcibly perform
the runtime resume by mimicking the usage count even if the device has
been runtime-suspended beforehand. This was needed to assure to
trigger the jack detection update after the system resume.
And recently we also applied the similar logic to the HD-audio
controller side. However this seems leading to some inconsistency,
and eventually PCI controller gets screwed up.
This patch is an attempt to fix and clean up those behavior: instead
of the tricky runtime resume procedure, the existing jackpoll work is
scheduled when such a forced codec resume is required. The jackpoll
work will power up the codec, and this alone should suffice for the
jack status update in usual cases. If the extra polling is requested
(by checking codec->jackpoll_interval), the manual update is invoked
after that, and the codec is powered down again.
Also, we filter the spurious wake up of the codec from the controller
runtime resume by checking codec->relaxed_resume flag. If this flag
is set, basically we don't need to wake up explicitly, but it's
supposed to be done via the audio component notifier.
Fixes: c4c8dd6ef807 ("ALSA: hda: Skip controller resume if not needed")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
A spin lock is taken here so we should use GFP_ATOMIC.
Fixes: 5d44fe7c9808 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Wei Yongjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Enable new codec supported for ALC245.
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
snd_microii_spdif_default_get() invokes snd_usb_lock_shutdown(), which
increases the refcount of the snd_usb_audio object "chip".
When snd_microii_spdif_default_get() returns, local variable "chip"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.
The reference counting issue happens in several exception handling paths
of snd_microii_spdif_default_get(). When those error scenarios occur
such as usb_ifnum_to_if() returns NULL, the function forgets to decrease
the refcnt increased by snd_usb_lock_shutdown(), causing a refcnt leak.
Fix this issue by jumping to "end" label when those error scenarios
occur.
Fixes: 447d6275f0c2 ("ALSA: usb-audio: Add sanity checks for endpoint accesses")
Signed-off-by: Xiyu Yang <[email protected]>
Signed-off-by: Xin Tan <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The commit in the Fixes tag changed get_xdp_id to only return prog_id
if flags is 0, but there are other XDP flags than the modes - e.g.,
XDP_FLAGS_UPDATE_IF_NOEXIST. Since the intention was only to look at
MODE flags, clear other ones before checking if flags is 0.
Fixes: f07cbad29741 ("libbpf: Fix bpf_get_link_xdp_id flags handling")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Acked-by: Andrey Ignatov <[email protected]>
|
|
A user reported [0] hitting the WARN_ON in fib_info_nh:
[ 8633.839816] ------------[ cut here ]------------
[ 8633.839819] WARNING: CPU: 0 PID: 1719 at include/net/nexthop.h:251 fib_select_path+0x303/0x381
...
[ 8633.839846] RIP: 0010:fib_select_path+0x303/0x381
...
[ 8633.839848] RSP: 0018:ffffb04d407f7d00 EFLAGS: 00010286
[ 8633.839850] RAX: 0000000000000000 RBX: ffff9460b9897ee8 RCX: 00000000000000fe
[ 8633.839851] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: 0000000000000000
[ 8633.839852] RBP: ffff946076049850 R08: 0000000059263a83 R09: ffff9460840e4000
[ 8633.839853] R10: 0000000000000014 R11: 0000000000000000 R12: ffffb04d407f7dc0
[ 8633.839854] R13: ffffffffa4ce3240 R14: 0000000000000000 R15: ffff9460b7681f60
[ 8633.839857] FS: 00007fcac2e02700(0000) GS:ffff9460bdc00000(0000) knlGS:0000000000000000
[ 8633.839858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 8633.839859] CR2: 00007f27beb77e28 CR3: 0000000077734000 CR4: 00000000000006f0
[ 8633.839867] Call Trace:
[ 8633.839871] ip_route_output_key_hash_rcu+0x421/0x890
[ 8633.839873] ip_route_output_key_hash+0x5e/0x80
[ 8633.839876] ip_route_output_flow+0x1a/0x50
[ 8633.839878] __ip4_datagram_connect+0x154/0x310
[ 8633.839880] ip4_datagram_connect+0x28/0x40
[ 8633.839882] __sys_connect+0xd6/0x100
...
The WARN_ON is triggered in fib_select_default which is invoked when
there are multiple default routes. Update the function to use
fib_info_nhc and convert the nexthop checks to use fib_nh_common.
Add test case that covers the affected code path.
[0] https://github.com/FRRouting/frr/issues/6089
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The NetLabel Tools project has moved from http://netlabel.sf.net to a
GitHub project. Update to directly refer to the new home for the tools.
Signed-off-by: Salvatore Bonaccorso <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add myself as another maintainer of dpaa2-eth.
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The data fin flag is set only via a DSS option, but
mptcp_incoming_options() copies it unconditionally from the
provided RX options.
Since we do not clear all the mptcp sock RX options in a
socket free/alloc cycle, we can end-up with a stray data_fin
value while parsing e.g. MPC packets.
That would lead to mapping data corruption and will trigger
a few WARN_ON() in the RX path.
Instead of adding a costly memset(), fetch the data_fin flag
only for DSS packets - when we always explicitly initialize
such bit at option parsing time.
Fixes: 648ef4b88673 ("mptcp: Implement MPTCP receive path")
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a qdisc is attached to the VRF device, the packet goes down the ndo
xmit function which is setup to send the packet back to the VRF driver
which does a lookup to send the packet out. The lookup in the VRF driver
is not considering xfrm policies. Change it to use ip6_dst_lookup_flow
rather than ip6_route_output.
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Signed-off-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Support for non-root users to send ICMP ECHO requests was added
back in Linux 3.0 kernel, but the documentation for the sysctl
to enable it has been missing.
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jere Leppänen says:
====================
sctp: Fix problems with peer restart when in SHUTDOWN-PENDING state and socket is closed
These patches are related to the scenario described in commit
bdf6fa52f01b ("sctp: handle association restarts when the socket is
closed."). To recap, when our association is in SHUTDOWN-PENDING state
and we've closed our one-to-one socket, while the peer crashes without
being detected, restarts and reconnects using the same addresses and
ports, we start association shutdown.
In this case, Cumulative TSN Ack in the SHUTDOWN that we send has
always been incorrect. Additionally, bundling of the SHUTDOWN with the
COOKIE-ACK was broken by a later commit. This series fixes both of
these issues.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When starting shutdown in sctp_sf_do_dupcook_a(), get the value for
SHUTDOWN Cumulative TSN Ack from the new association, which is
reconstructed from the cookie, instead of the old association, which
the peer doesn't have anymore.
Otherwise the SHUTDOWN is either ignored or replied to with an ABORT
by the peer because CTSN Ack doesn't match the peer's Initial TSN.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.")
Signed-off-by: Jere Leppänen <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When we start shutdown in sctp_sf_do_dupcook_a(), we want to bundle
the SHUTDOWN with the COOKIE-ACK to ensure that the peer receives them
at the same time and in the correct order. This bundling was broken by
commit 4ff40b86262b ("sctp: set chunk transport correctly when it's a
new asoc"), which assigns a transport for the COOKIE-ACK, but not for
the SHUTDOWN.
Fix this by passing a reference to the COOKIE-ACK chunk as an argument
to sctp_sf_do_9_2_start_shutdown() and onward to
sctp_make_shutdown(). This way the SHUTDOWN chunk is assigned the same
transport as the COOKIE-ACK chunk, which allows them to be bundled.
In sctp_sf_do_9_2_start_shutdown(), the void *arg parameter was
previously unused. Now that we're taking it into use, it must be a
valid pointer to a chunk, or NULL. There is only one call site where
it's not, in sctp_sf_autoclose_timer_expire(). Fix that too.
Fixes: 4ff40b86262b ("sctp: set chunk transport correctly when it's a new asoc")
Signed-off-by: Jere Leppänen <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is no reason to fail the probing of the switch if the MTU couldn't
be configured correctly (either the switch port itself, or the host
port) for whatever reason. MTU-sized traffic probably won't work, sure,
but we can still probably limp on and support some form of communication
anyway, which the users would probably appreciate more.
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Reported-by: Oleksij Rempel <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
skb->sk does not always point to a full blown socket,
we need to use sk_fullsock() before accessing fields which
only make sense on full socket.
BUG: KASAN: use-after-free in report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
Read of size 1 at addr ffff88805eb9b245 by task syz-executor.5/9630
CPU: 1 PID: 9630 Comm: syz-executor.5 Not tainted 5.7.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x188/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xd3/0x315 mm/kasan/report.c:382
__kasan_report.cold+0x35/0x4d mm/kasan/report.c:511
kasan_report+0x33/0x50 mm/kasan/common.c:625
report_sock_error+0x286/0x300 net/sched/sch_etf.c:141
etf_enqueue_timesortedlist+0x389/0x740 net/sched/sch_etf.c:170
__dev_xmit_skb net/core/dev.c:3710 [inline]
__dev_queue_xmit+0x154a/0x30a0 net/core/dev.c:4021
neigh_hh_output include/net/neighbour.h:499 [inline]
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0xfb5/0x25b0 net/ipv6/ip6_output.c:117
__ip6_finish_output+0x442/0xab0 net/ipv6/ip6_output.c:143
ip6_finish_output+0x34/0x1f0 net/ipv6/ip6_output.c:153
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x239/0x810 net/ipv6/ip6_output.c:176
dst_output include/net/dst.h:435 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip6_xmit+0xe1a/0x2090 net/ipv6/ip6_output.c:280
tcp_v6_send_synack+0x4e7/0x960 net/ipv6/tcp_ipv6.c:521
tcp_rtx_synack+0x10d/0x1a0 net/ipv4/tcp_output.c:3916
inet_rtx_syn_ack net/ipv4/inet_connection_sock.c:669 [inline]
reqsk_timer_handler+0x4c2/0xb40 net/ipv4/inet_connection_sock.c:763
call_timer_fn+0x1ac/0x780 kernel/time/timer.c:1405
expire_timers kernel/time/timer.c:1450 [inline]
__run_timers kernel/time/timer.c:1774 [inline]
__run_timers kernel/time/timer.c:1741 [inline]
run_timer_softirq+0x623/0x1600 kernel/time/timer.c:1787
__do_softirq+0x26c/0x9f7 kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x192/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:546 [inline]
smp_apic_timer_interrupt+0x19e/0x600 arch/x86/kernel/apic/apic.c:1140
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829
</IRQ>
RIP: 0010:des_encrypt+0x157/0x9c0 lib/crypto/des.c:792
Code: 85 22 06 00 00 41 31 dc 41 8b 4d 04 44 89 e2 41 83 e4 3f 4a 8d 3c a5 60 72 72 88 81 e2 3f 3f 3f 3f 48 89 f8 48 c1 e8 03 31 d9 <0f> b6 34 28 48 89 f8 c1 c9 04 83 e0 07 83 c0 03 40 38 f0 7c 09 40
RSP: 0018:ffffc90003b5f6c0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: 1ffffffff10e4e55 RBX: 00000000d2f846d0 RCX: 00000000d2f846d0
RDX: 0000000012380612 RSI: ffffffff839863ca RDI: ffffffff887272a8
RBP: dffffc0000000000 R08: ffff888091d0a380 R09: 0000000000800081
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000012
R13: ffff8880a8ae8078 R14: 00000000c545c93e R15: 0000000000000006
cipher_crypt_one crypto/cipher.c:75 [inline]
crypto_cipher_encrypt_one+0x124/0x210 crypto/cipher.c:82
crypto_cbcmac_digest_update+0x1b5/0x250 crypto/ccm.c:830
crypto_shash_update+0xc4/0x120 crypto/shash.c:119
shash_ahash_update+0xa3/0x110 crypto/shash.c:246
crypto_ahash_update include/crypto/hash.h:547 [inline]
hash_sendmsg+0x518/0xad0 crypto/algif_hash.c:102
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x308/0x7e0 net/socket.c:2362
___sys_sendmsg+0x100/0x170 net/socket.c:2416
__sys_sendmmsg+0x195/0x480 net/socket.c:2506
__do_sys_sendmmsg net/socket.c:2535 [inline]
__se_sys_sendmmsg net/socket.c:2532 [inline]
__x64_sys_sendmmsg+0x99/0x100 net/socket.c:2532
do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45c829
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f6d9528ec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000004fc080 RCX: 000000000045c829
RDX: 0000000000000001 RSI: 0000000020002640 RDI: 0000000000000004
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000008d7 R14: 00000000004cb7aa R15: 00007f6d9528f6d4
Fixes: 4b15c7075352 ("net/sched: Make etf report drops on error_queue")
Fixes: 25db26a91364 ("net/sched: Introduce the ETF Qdisc")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Vinicius Costa Gomes <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the following sparse warning:
kernel/trace/tracing_map.c:286:6: warning: symbol
'tracing_map_array_clear' was not declared. Should it be static?
kernel/trace/tracing_map.c:297:6: warning: symbol
'tracing_map_array_free' was not declared. Should it be static?
kernel/trace/tracing_map.c:319:26: warning: symbol
'tracing_map_array_alloc' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/[email protected]
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Jason Yan <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
This macro was intentionally broken so that the kernel code is not
poluted with such noargs macro used simply as markers. This use case
can be satisfied by using dummy no inline functions. Just remove it.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
unregister_ftrace_direct()
kmemleak reported the following:
unreferenced object 0xffff90d47127a920 (size 32):
comm "modprobe", pid 1766, jiffies 4294792031 (age 162.568s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 22 01 00 00 00 00 ad de ........".......
00 78 12 a7 ff ff ff ff 00 00 b6 c0 ff ff ff ff .x..............
backtrace:
[<00000000bb79e72e>] register_ftrace_direct+0xcb/0x3a0
[<00000000295e4f79>] do_one_initcall+0x72/0x340
[<00000000873ead18>] do_init_module+0x5a/0x220
[<00000000974d9de5>] load_module+0x2235/0x2550
[<0000000059c3d6ce>] __do_sys_finit_module+0xc0/0x120
[<000000005a8611b4>] do_syscall_64+0x60/0x230
[<00000000a0cdc49e>] entry_SYSCALL_64_after_hwframe+0x49/0xb3
The entry used to save the direct descriptor needs to be freed
when unregistering.
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Make it consistent with the other sections.
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
In this workflow:
$ make ARCH=um defconfig && make ARCH=um -j8
[snip]
$ make ARCH=um mrproper
[snip]
$ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um
[snip]
CC scripts/mod/empty.o
In file included from ../include/linux/types.h:6,
from ../include/linux/mod_devicetable.h:12,
from ../scripts/mod/devicetable-offsets.c:3:
../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
5 | #include <asm/types.h>
| ^~~~~~~~~~~~~
compilation terminated.
make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2
make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um'
make: *** [Makefile:180: sub-make] Error 2
The cause of the error was because arch/$(SUBARCH)/include/generated files
weren't properly cleaned by `make ARCH=um mrproper`.
Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Reported-by: Theodore Ts'o <[email protected]>
Suggested-by: Masahiro Yamada <[email protected]>
Signed-off-by: Vitor Massaru Iha <[email protected]>
Reviewed-by: Brendan Higgins <[email protected]>
Tested-by: Brendan Higgins <[email protected]>
Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
As the bug report [1] pointed out, <linux/vermagic.h> must be included
after <linux/module.h>.
I believe we should not impose any include order restriction. We often
sort include directives alphabetically, but it is just coding style
convention. Technically, we can include header files in any order by
making every header self-contained.
Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in
<asm/module.h>, which is not included from <linux/vermagic.h>.
Hence, the straight-forward fix-up would be as follows:
|--- a/include/linux/vermagic.h
|+++ b/include/linux/vermagic.h
|@@ -1,5 +1,6 @@
| /* SPDX-License-Identifier: GPL-2.0 */
| #include <generated/utsrelease.h>
|+#include <linux/module.h>
|
| /* Simply sanity version stamp for modules. */
| #ifdef CONFIG_SMP
This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC
definitions into <asm/vermagic.h>.
With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal,
and the location of MODULE_ARCH_VERMAGIC definitions will be consistent.
For arc and ia64, MODULE_PROC_FAMILY is only used for defining
MODULE_ARCH_VERMAGIC. I squashed it.
For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely
because they contained nothing but MODULE_ARCH_VERMAGIC definition.
Kbuild will automatically generate <asm/modules.h> at build-time,
wrapping <asm-generic/module.h>.
[1] https://lore.kernel.org/lkml/[email protected]
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Jessica Yu <[email protected]>
|
|
Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect
command line changes"), this rule is every time re-run even if you change
nothing.
cmd_dtc takes one additional parameter to pass to the -O option of dtc.
We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked
from if_changed_rule is false positive.
Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes")
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
SMB2_open_init() expects a pre-initialised lease_key when opening a
file with a lease, so set pfid->lease_key prior to calling it in
open_shroot().
This issue was observed when performing some DFS failover tests and
the lease key was never randomly generated.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
CC: Stable <[email protected]>
|
|
This patch is basically fixing the lookup of tcons (DFS specific) during
reconnect (smb2pdu.c:__smb2_reconnect) to update their prefix paths.
Previously, we relied on the TCP_Server_Info pointer
(misc.c:tcp_super_cb) to determine which tcon to update the prefix path
We could not rely on TCP server pointer to determine which super block
to update the prefix path when reconnecting tcons since it might map
to different tcons that share same TCP connection.
Instead, walk through all cifs super blocks and compare their DFS full
paths with the tcon being updated to.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
|
|
kmemleak report 1:
[<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
[<05a2c9ed>] create_field_var+0xcf/0x180
[<528a2d68>] action_create+0xe2/0xc80
[<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
[<28ea5d3d>] trigger_process_regex+0x7b/0xc0
[<3138e86f>] event_trigger_write+0x4d/0xb0
[<ffd66c19>] __vfs_write+0x30/0x200
[<4f424a0d>] vfs_write+0x96/0x1b0
[<da59a290>] ksys_write+0x53/0xc0
[<3717101a>] __ia32_sys_write+0x15/0x20
[<c5f23497>] do_fast_syscall_32+0x70/0x250
[<46e2629c>] entry_SYSENTER_32+0xaf/0x102
This is because save_vars[] of struct hist_trigger_data are
not destroyed
kmemleak report 2:
[<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
[<6e5e97c5>] create_var+0x3c/0x110
[<de82f1b9>] create_field_var+0xaf/0x180
[<528a2d68>] action_create+0xe2/0xc80
[<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
[<28ea5d3d>] trigger_process_regex+0x7b/0xc0
[<3138e86f>] event_trigger_write+0x4d/0xb0
[<ffd66c19>] __vfs_write+0x30/0x200
[<4f424a0d>] vfs_write+0x96/0x1b0
[<da59a290>] ksys_write+0x53/0xc0
[<3717101a>] __ia32_sys_write+0x15/0x20
[<c5f23497>] do_fast_syscall_32+0x70/0x250
[<46e2629c>] entry_SYSENTER_32+0xaf/0x102
struct hist_field allocated through create_var() do not initialize
"ref" field to 1. The code in __destroy_hist_field() does not destroy
object if "ref" is initialized to zero, the condition
if (--hist_field->ref > 1) always passes since unsigned int wraps.
kmemleak report 3:
[<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0
[<bb7f80a5>] kstrdup+0x27/0x50
[<39d70006>] init_var_ref+0x58/0xd0
[<8ca76370>] create_var_ref+0x89/0xe0
[<f045fc39>] action_create+0x38f/0xc80
[<7c146821>] event_hist_trigger_func+0x15b5/0x1920
[<07de3f61>] trigger_process_regex+0x7b/0xc0
[<e87daf8f>] event_trigger_write+0x4d/0xb0
[<19bf1512>] __vfs_write+0x30/0x200
[<64ce4d27>] vfs_write+0x96/0x1b0
[<a6f34170>] ksys_write+0x53/0xc0
[<7d4230cd>] __ia32_sys_write+0x15/0x20
[<8eadca00>] do_fast_syscall_32+0x70/0x250
[<235cf985>] entry_SYSENTER_32+0xaf/0x102
hist_fields (system & event_name) are not freed
Link: http://lkml.kernel.org/r/20200422061503.GA5151@cosmos
Signed-off-by: Vamshi K Sthambamkadi <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
This disables tcon re-use for DFS shares.
tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.
If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.
tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:
//domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot
//serverA/dfsroot/link -> /serverA/target1/aa/bb
//serverA/dfsroot/link2 -> /serverA/target1/cc/dd
you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.
The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.
Signed-off-by: Paulo Alcantara (SUSE) <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Reviewed-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Sometimes, WARN_FUNC() and other users of symbol_by_offset() will
associate the first instruction of a symbol with the symbol preceding
it. This is because symbol->offset + symbol->len is already outside of
the symbol's range.
Fixes: 2a362ecc3ec9 ("objtool: Optimize find_symbol_*() and read_symbols()")
Signed-off-by: Julien Thierry <[email protected]>
Reviewed-by: Miroslav Benes <[email protected]>
Signed-off-by: Josh Poimboeuf <[email protected]>
|
|
Current logic yields the child task as the parent.
Before:
$ perf record bash -c "perf list > /dev/null"
$ perf script -D |grep 'FORK\|EXIT'
4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470)
4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472)
4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470)
^
Note the repeated values here -------------------/
After:
383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266)
383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266)
383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265)
Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()")
Reported-by: KP Singh <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
uclamp_fork() resets the uclamp values to their default when the
reset-on-fork flag is set. It also checks whether the task has a RT
policy, and sets its uclamp.min to 1024 accordingly. However, during
reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after,
hence leading to an erroneous uclamp.min setting for the new task if it
was forked from RT.
Fix this by removing the unnecessary check on rt_task() in
uclamp_fork() as this doesn't make sense if the reset-on-fork flag is
set.
Fixes: 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks")
Reported-by: Chitti Babu Theegala <[email protected]>
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Patrick Bellasi <[email protected]>
Reviewed-by: Dietmar Eggemann <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Improve readability of the function intel_set_max_freq_ratio() by moving
the check for KNL CPUs there, together with checks for GLM and SKX.
Signed-off-by: Giovanni Gherdovich <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The static key arch_scale_freq_key only needs to be enabled once (at
boot). This change fixes a bug by which the key was enabled every time cpu0
is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are
started from the idle thread: setting a static key from there means
acquiring a lock and may result in sleeping in the idle task, causing CPU
lockup.
Another consequence of this change is that init_counter_refs() is now
called on each CPU correctly; previously the function on_each_cpu() was
used, but it was called at boot when the only online cpu is cpu0.
[[email protected]: Tested and wrote changelog]
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Chris Wilson <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Giovanni Gherdovich <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will
rightfully report that the 4C turbo ratio is zero. In such cases, use the
1C turbo ratio instead for frequency invariance calculations.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Like Xu <[email protected]>
Reported-by: Neil Rickert <[email protected]>
Signed-off-by: Giovanni Gherdovich <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Tested-by: Dave Kleikamp <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Some hypervisors such as VMWare ESXi 5.5 advertise support for
X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular,
MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base
clock frequency of the CPU (highest non-turbo frequency), producing a
division by zero when computing the ratio turbo_freq/base_freq necessary
for frequency invariant accounting.
It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate
data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance
couldn't be done in principle (not that it would make a lot of sense in a
VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This
appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise
that feature.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Apparently there's people doing 64bit builds on 32bit machines.
Fixes: 74b873e49d92 ("objtool: Optimize find_rela_by_dest_range()")
Reported-by: [email protected]
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
|
|
fib_tests is spewing errors:
...
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
ping: connect: Network is unreachable
Cannot open network namespace "ns1": No such file or directory
Cannot open network namespace "ns1": No such file or directory
...
Each test entry in fib_tests is supposed to do its own setup and
cleanup. Right now the $IP commands in fib_suppress_test are
failing because there is no ns1. Add the setup/cleanup and logging
expected for each test.
Fixes: ca7a03c41753 ("ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress rule")
Signed-off-by: David Ahern <[email protected]>
Cc: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Florian Fainelli says:
====================
net: dsa: b53: Various ARL fixes
This patch series fixes a number of short comings in the existing b53
driver ARL management logic in particular:
- we were not looking up the {MAC,VID} tuples against their VID, despite
having VLANs enabled
- the MDB entries (multicast) would lose their validity as soon as a
single port in the vector would leave the entry
- the ARL was currently under utilized because we would always place new
entries in bin index #1, instead of using all possible bins available,
thus reducing the ARL effective size by 50% or 75% depending on the
switch generation
- it was possible to overwrite the ARL entries because no proper space
verification was done
This patch series addresses all of these issues.
Changes in v2:
- added a new patch to correctly flip invidual VLAN learning vs. shared
VLAN learning depending on the global VLAN state
- added Andrew's R-b tags for patches which did not change
- corrected some verbosity and minor issues in patch #4 to match caller
expectations, also avoid a variable length DECLARE_BITMAP() call
====================
Signed-off-by: David S. Miller <[email protected]>
|