| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Gate pages were missed when converting from get to pin_user_pages().
This can lead to refcount imbalances. This is reliably and quickly
reproducible running the x86 selftests when vsyscall=emulate is enabled
(the default). Fix by using try_grab_page() with appropriate flags
passed.
The long story:
Today, pin_user_pages() and get_user_pages() are similar interfaces for
manipulating page reference counts. However, "pins" use a "bias" value
and manipulate the actual reference count by 1024 instead of 1 used by
plain "gets".
That means that pin_user_pages() must be matched with unpin_user_pages()
and can't be mixed with a plain put_user_pages() or put_page().
Enter gate pages, like the vsyscall page. They are pages usually in the
kernel image, but which are mapped to userspace. Userspace is allowed
access to them, including interfaces using get/pin_user_pages(). The
refcount of these kernel pages is manipulated just like a normal user
page on the get/pin side so that the put/unpin side can work the same
for normal user pages or gate pages.
get_gate_page() uses try_get_page() which only bumps the refcount by
1, not 1024, even if called in the pin_user_pages() path. If someone
pins a gate page, this happens:
pin_user_pages()
get_gate_page()
try_get_page() // bump refcount +1
... some time later
unpin_user_pages()
page_ref_sub_and_test(page, 1024))
... and boom, we get a refcount off by 1023. This is reliably and
quickly reproducible running the x86 selftests when booted with
vsyscall=emulate (the default). The selftests use ptrace(), but I
suspect anything using pin_user_pages() on gate pages could hit this.
To fix it, simply use try_grab_page() instead of try_get_page(), and
pass 'gup_flags' in so that FOLL_PIN can be respected.
This bug traces back to the very beginning of the FOLL_PIN support in
commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), which showed up in
the 5.7 release.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages")
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: x86@kernel.org
Cc: Jann Horn <jannh@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A couple of minor fixes to the display changes that went in for 5.9.
The most important of which is a workaround for a HW bug that was
exposed by better push buffer space management, leading to
random(ish...) display engine hangs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5QDxyMihrxbPk+-sORnaYtjR6_dbM68gEhb2wxht_G1w@mail.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.9-rc4:
- Clang build warning fix
- HDCP fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgbz2pnx.fsf@intel.com
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
amd-drm-fixes-5.9-2020-09-03:
amdgpu:
- Fix for 32bit systems
- SW CTF fix
- Update for Sienna Cichlid
- CIK bug fixes
radeon:
- PLL fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200903050022.3960-1-alexander.deucher@amd.com
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'smsc9420_probe()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.
While at it, rewrite the size passed to 'dma_alloc_coherent()' the same way
as the one passed to 'dma_free_coherent()'. This form is less verbose:
sizeof(struct smsc9420_dma_desc) * RX_RING_SIZE +
sizeof(struct smsc9420_dma_desc) * TX_RING_SIZE,
vs
sizeof(struct smsc9420_dma_desc) * (RX_RING_SIZE + TX_RING_SIZE)
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'epic_init_one()', GFP_KERNEL can be used
because it is a probe function and no lock is acquired.
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Karsten Graul says:
====================
net/smc: fixes 2020-09-03
Please apply the following patch series for smc to netdev's net tree.
Patch 1 fixes the toleration of older SMC implementations. Patch 2
takes care of a problem that happens when SMCR is used after SMCD
initialization failed. Patch 3 fixes a problem with freed send buffers,
and patch 4 corrects refcounting when SMC terminates due to device
removal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an ISM device is removed, all its linkgroups are terminated,
i.e. all the corresponding connections are killed.
Connection killing invokes smc_close_active_abort(), which decreases
the sock refcount for certain states to simulate passive closing.
And it cancels the close worker and has to give up the sock lock for
this timeframe. This opens the door for a passive close worker or a
socket close to run in between. In this case smc_close_active_abort() and
passive close worker resp. smc_release() might do a sock_put for passive
closing. This causes:
[ 1323.315943] refcount_t: underflow; use-after-free.
[ 1323.316055] WARNING: CPU: 3 PID: 54469 at lib/refcount.c:28 refcount_warn_saturate+0xe8/0x130
[ 1323.316069] Kernel panic - not syncing: panic_on_warn set ...
[ 1323.316084] CPU: 3 PID: 54469 Comm: uperf Not tainted 5.9.0-20200826.rc2.git0.46328853ed20.300.fc32.s390x+debug #1
[ 1323.316096] Hardware name: IBM 2964 NC9 702 (z/VM 6.4.0)
[ 1323.316108] Call Trace:
[ 1323.316125] [<00000000c0d4aae8>] show_stack+0x90/0xf8
[ 1323.316143] [<00000000c15989b0>] dump_stack+0xa8/0xe8
[ 1323.316158] [<00000000c0d8344e>] panic+0x11e/0x288
[ 1323.316173] [<00000000c0d83144>] __warn+0xac/0x158
[ 1323.316187] [<00000000c1597a7a>] report_bug+0xb2/0x130
[ 1323.316201] [<00000000c0d36424>] monitor_event_exception+0x44/0xc0
[ 1323.316219] [<00000000c195c716>] pgm_check_handler+0x1da/0x238
[ 1323.316234] [<00000000c151844c>] refcount_warn_saturate+0xec/0x130
[ 1323.316280] ([<00000000c1518448>] refcount_warn_saturate+0xe8/0x130)
[ 1323.316310] [<000003ff801f2e2a>] smc_release+0x192/0x1c8 [smc]
[ 1323.316323] [<00000000c169f1fa>] __sock_release+0x5a/0xe0
[ 1323.316334] [<00000000c169f2ac>] sock_close+0x2c/0x40
[ 1323.316350] [<00000000c1086de0>] __fput+0xb8/0x278
[ 1323.316362] [<00000000c0db1e0e>] task_work_run+0x76/0xb8
[ 1323.316393] [<00000000c0d8ab84>] do_exit+0x26c/0x520
[ 1323.316408] [<00000000c0d8af08>] do_group_exit+0x48/0xc0
[ 1323.316421] [<00000000c0d8afa8>] __s390x_sys_exit_group+0x28/0x38
[ 1323.316433] [<00000000c195c32c>] system_call+0xe0/0x2b4
[ 1323.316446] 1 lock held by uperf/54469:
[ 1323.316456] #0: 0000000044125e60 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x44/0xe0
The patch rechecks sock state in smc_close_active_abort() after
smc_close_cancel_work() to avoid duplicate decrease of sock
refcount for the same purpose.
Fixes: 611b63a12732 ("net/smc: cancel tx worker in case of socket aborts")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When an SMC connection is created, and there is a problem to
create an RMB or DMB, the previously created send buffer is
thrown away as well including buffer descriptor freeing.
Make sure the connection no longer references the freed
buffer descriptor, otherwise bugs like this are possible:
[71556.835148] =============================================================================
[71556.835168] BUG kmalloc-128 (Tainted: G B OE ): Poison overwritten
[71556.835172] -----------------------------------------------------------------------------
[71556.835179] INFO: 0x00000000d20894be-0x00000000aaef63e9 @offset=2724. First byte 0x0 instead of 0x6b
[71556.835215] INFO: Allocated in __smc_buf_create+0x184/0x578 [smc] age=0 cpu=5 pid=46726
[71556.835234] ___slab_alloc+0x5a4/0x690
[71556.835239] __slab_alloc.constprop.0+0x70/0xb0
[71556.835243] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835250] __smc_buf_create+0x184/0x578 [smc]
[71556.835257] smc_buf_create+0x2e/0xe8 [smc]
[71556.835264] smc_listen_work+0x516/0x6a0 [smc]
[71556.835275] process_one_work+0x280/0x478
[71556.835280] worker_thread+0x66/0x368
[71556.835287] kthread+0x17a/0x1a0
[71556.835294] ret_from_fork+0x28/0x2c
[71556.835301] INFO: Freed in smc_buf_create+0xd8/0xe8 [smc] age=0 cpu=5 pid=46726
[71556.835307] __slab_free+0x246/0x560
[71556.835311] kfree+0x398/0x3f8
[71556.835318] smc_buf_create+0xd8/0xe8 [smc]
[71556.835324] smc_listen_work+0x516/0x6a0 [smc]
[71556.835328] process_one_work+0x280/0x478
[71556.835332] worker_thread+0x66/0x368
[71556.835337] kthread+0x17a/0x1a0
[71556.835344] ret_from_fork+0x28/0x2c
[71556.835348] INFO: Slab 0x00000000a0744551 objects=51 used=51 fp=0x0000000000000000 flags=0x1ffff00000010200
[71556.835352] INFO: Object 0x00000000563480a1 @offset=2688 fp=0x00000000289567b2
[71556.835359] Redzone 000000006783cde2: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835363] Redzone 00000000e35b876e: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835367] Redzone 0000000023074562: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835372] Redzone 00000000b9564b8c: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835376] Redzone 00000000810c6362: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835380] Redzone 0000000065ef52c3: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835384] Redzone 00000000c5dd6984: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835388] Redzone 000000004c480f8f: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................
[71556.835392] Object 00000000563480a1: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835397] Object 000000009c479d06: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835401] Object 000000006e1dce92: 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b kkkk....kkkkkkkk
[71556.835405] Object 00000000227f7cf8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835410] Object 000000009a701215: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835414] Object 000000003731ce76: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835418] Object 00000000f7085967: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[71556.835422] Object 0000000007f99927: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk.
[71556.835427] Redzone 00000000579c4913: bb bb bb bb bb bb bb bb ........
[71556.835431] Padding 00000000305aef82: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835435] Padding 00000000b1cdd722: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835438] Padding 00000000c7568199: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835442] Padding 00000000fad4c4d4: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[71556.835451] CPU: 0 PID: 47939 Comm: kworker/0:15 Tainted: G B OE 5.9.0-rc1uschi+ #54
[71556.835456] Hardware name: IBM 3906 M03 703 (LPAR)
[71556.835464] Workqueue: events smc_listen_work [smc]
[71556.835470] Call Trace:
[71556.835478] [<00000000d5eaeb10>] show_stack+0x90/0xf8
[71556.835493] [<00000000d66fc0f8>] dump_stack+0xa8/0xe8
[71556.835499] [<00000000d61a511c>] check_bytes_and_report+0x104/0x130
[71556.835504] [<00000000d61a57b2>] check_object+0x26a/0x2e0
[71556.835509] [<00000000d61a59bc>] alloc_debug_processing+0x194/0x238
[71556.835514] [<00000000d61a8c14>] ___slab_alloc+0x5a4/0x690
[71556.835519] [<00000000d61a9170>] __slab_alloc.constprop.0+0x70/0xb0
[71556.835524] [<00000000d61aaf66>] kmem_cache_alloc_trace+0x38e/0x3f8
[71556.835530] [<000003ff80549bbc>] __smc_buf_create+0x184/0x578 [smc]
[71556.835538] [<000003ff8054a396>] smc_buf_create+0x2e/0xe8 [smc]
[71556.835545] [<000003ff80540c16>] smc_listen_work+0x516/0x6a0 [smc]
[71556.835549] [<00000000d5f0f448>] process_one_work+0x280/0x478
[71556.835554] [<00000000d5f0f6a6>] worker_thread+0x66/0x368
[71556.835559] [<00000000d5f18692>] kthread+0x17a/0x1a0
[71556.835563] [<00000000d6abf3b8>] ret_from_fork+0x28/0x2c
[71556.835569] INFO: lockdep is turned off.
[71556.835573] FIX kmalloc-128: Restoring 0x00000000d20894be-0x00000000aaef63e9=0x6b
[71556.835577] FIX kmalloc-128: Marking all objects used
Fixes: fd7f3a746582 ("net/smc: remove freed buffer from list")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SMC tries to make use of SMCD first. If a problem shows up,
it tries to switch to SMCR. If the SMCD initializing problem shows
up after the SMCD connection has already been initialized, field
rx_off keeps the wrong SMCD value for SMCR, which results in corrupted
data at the receiver.
This patch adds an explicit (re-)setting of field rx_off to zero if the
connection uses SMCR.
Fixes: be244f28d22f ("net/smc: add SMC-D support in data transfer")
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Older SMCR implementations had no link failover support and used one
link only. Because the handshake protocol requires to try the
establishment of a second link the old code sent a fake add_link message
and declined any server response afterwards.
The current code supports multiple links and inspects the received fake
add_link message more closely. To tolerate the fake add_link messages
smc_llc_is_local_add_link() needs an improved check of the message to
be able to separate between locally enqueued and fake add_link messages.
And smc_llc_cli_add_link() needs to check if the provided qp_mtu size is
invalid and reject the add_link request in that case.
Fixes: c48254fa48e5 ("net/smc: move add link processing for new device into llc layer")
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix spacing issues reported for misaligned switch..case and extra new
lines.
Also updated the file header to comply with networking commet style.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Expose all exisiting inet sockopt bits through inet_diag for debug purpose.
Corresponding changes in iproute2 ss will be submitted to output all
these values.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: dsa: bcm_sf2: Clock support
This patch series adds support for controlling the SF2 switch core and
divider clock (where applicable).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever a port gets enabled/disabled, recalcultate the required switch
clock rate to make sure it always gets set to the expected rate
targeting our switch use case. This is only done for the BCM7445 switch
as there is no clocking profile available for BCM7278.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fetch the corresponding clock resource and enable/disable it during
suspend/resume if and only if we have no ports defined for Wake-on-LAN.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Describe the two possible clocks feeding into the Broadcom SF2
integrated Ethernet switch. BCM7445 systems have two clocks, one for the
main switch core clock, and another for controlling the switch clock
divider whereas BCM7278 systems only have the first kind.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Florian Fainelli says:
====================
net: systemport: Clock support
This patch series makes the SYSTEMPORT driver request and manage its
main and Wake-on-LAN clocks appropriately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is necessary to manage the Wake-on-LAN clock to turn on the
appropriate blocks for MPD or CFP-based packet matching to work
otherwise we will not be able to reliably match packets during suspend.
Reported-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We disable clocks shortly after probing the device to save as much power as
possible in case the interface is never used. When bcm_sysport_open() is
invoked, clocks are enabled, and disabled in bcm_sysport_stop().
A similar scheme is applied to the suspend/resume functions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Broadcom SYSTEMPORT adapters require the use of two clocks for
normal operations and during Wake-on-LAN, document those in the binding
document.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ops->set_phys_id() returned an error, previously we would only break
out of the inner loop, which neither stopped the outer loop nor returned
the error to the user (since 'rc' would be overwritten on the next pass
through the loop).
Thus, rewrite it to use a single loop, so that the break does the right
thing. Use u64 for 'count' and 'i' to prevent overflow in case of
(unreasonably) large values of id.data and n.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before changing this it's a bit confusing to read test output:
raw csum_off with bad offset (fails)
./psock_snd: write: Invalid argument
Change "fails" in the test case description to "expected to fail", so
that the test output can be more understandable.
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While CHELSIO_INLINE_CRYPTO is a guard symbol, and just enabling it does
not cause any additional code to be compiled in, all configuration
options protected by it depend on CONFIG_CHELSIO_T4. Hence it doesn't
make much sense to bother the user with the guard symbol question when
CONFIG_CHELSIO_T4 is disabled.
Fix this by moving the dependency from the individual config options to
the guard symbol.
Fixes: 44fd1c1fd8219551 ("chelsio/chtls: separate chelsio tls driver from crypto driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Russell King says:
====================
Convert mvpp2 to split PCS support
This series converts the mvpp2 driver to use the split PCS support
that has been merged into phylink last time around. I've been running
this for some time here and, apart from the recent bug fix sent to
net-next, have not seen any issues on DT based systems. I have not
tested ACPI setups, although I've tried to preserve the workaround.
Patch 1 formalises the ACPI workaround.
Patch 2 moves some of mac_config() to the mac_prepare() and
mac_finish() callbacks so we can keep the ordering when we split
the PCS bits out.
Patch 3 ensures that the port is forced down while changing the
interface mode - when in in-band mode, doing this in mac_prepare()
and mac_finish().
Patch 4 moves the reset handling to mac_prepare() and mac_finish()
Patch 5 does a straight conversion to use PCS operations.
Patch 6 splits the PCS operations into a GMAC PCS operations and
XLG PCS operations, selecting the appropriate set during
mac_prepare(). This eliminates a bunch of conditionals from the
code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split the XLG and GMAC PCS implementations and switch between them
during the mac_prepare() method.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert mvpp2 to phylink's new pcs support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the GMAC reset handling into mac_prepare() / mac_finish()
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ensure that the port is forced down while reconfiguring, controlling
this via mac_prepare() and mac_finish() so that it is down while we
are configuring our (future) PCS.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in
preparation to converting mvpp2 to split-PCS support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tidy up the ACPI hack so that we can minimise the function prototypes
for this. This avoids adding further prototypes unnecessarily.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tom Parkin says:
====================
l2tp: miscellaneous cleanups
This series of patches makes the following cleanups and improvements to
the l2tp code:
* various API tweaks to remove unused parameters from function calls
* lightly refactor the l2tp transmission path to capture more error
conditions in the data plane statistics
* repurpose the "magic feather" validation in l2tp to check for
sk_user_data (ab)use as opposed to refcount debugging
* remove some duplicated code
====================
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp_tunnel_closeall is called as a part of tunnel shutdown in order to
close all the sessions held by the tunnel. The code it uses to close a
session duplicates what l2tp_session_delete does.
Rather than duplicating the code, have l2tp_tunnel_closeall call
l2tp_session_delete instead.
This involves a very minor change to locking in l2tp_tunnel_closeall.
Previously, l2tp_tunnel_closeall checked the session "dead" flag while
holding tunnel->hlist_lock. This allowed for the code to step to the
next session in the list without releasing the lock if the current
session happened to be in the process of closing already.
By calling l2tp_session_delete instead, l2tp_tunnel_closeall must now
drop and regain the hlist lock for each session in the tunnel list.
Given that the likelihood of a session being in the process of closing
when the tunnel is closed, it seems worth this very minor potential
loss of efficiency to avoid duplication of the session delete code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The l2tp tunnel and session structures contain a "magic feather" field
which was originally intended to help trace lifetime bugs in the code.
Since the introduction of the shared kernel refcount code in refcount.h,
and l2tp's porting to those APIs, we are covered by the refcount code's
checks and warnings. Duplicating those checks in the l2tp code isn't
useful.
However, magic feather checks are still useful to help to detect bugs
stemming from misuse/trampling of the sk_user_data pointer in struct
sock. The l2tp code makes extensive use of sk_user_data to stash
pointers to the tunnel and session structures, and if another subsystem
overwrites sk_user_data it's important to detect this.
As such, rework l2tp's magic feather checks to focus on validating the
tunnel and session data structures when they're extracted from
sk_user_data.
* Add a new accessor function l2tp_sk_to_tunnel which contains a magic
feather check, and is used by l2tp_core and l2tp_ip[6]
* Comment l2tp_udp_encap_recv which doesn't use this new accessor function
because of the specific nature of the codepath it is called in
* Drop l2tp_session_queue_purge's check on the session magic feather:
it is called from code which is walking the tunnel session list, and
hence doesn't need validation
* Drop l2tp_session_free's check on the tunnel magic feather: the
intention of this check is covered by refcount.h's reference count
sanity checking
* Add session magic validation in pppol2tp_ioctl. On failure return
-EBADF, which mirrors the approach in pppol2tp_[sg]etsockopt.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
l2tp_xmit_skb has a number of failure paths which are not reflected in
the tunnel and session statistics because the stats are updated by
l2tp_xmit_core. Hence any errors occurring before l2tp_xmit_core is
called are missed from the statistics.
Refactor the transmit path slightly to capture all error paths.
l2tp_xmit_skb now leaves all the actual work of transmission to
l2tp_xmit_core, and updates the statistics based on l2tp_xmit_core's
return code.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The argument is unused, so remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The data_len argument passed to l2tp_xmit_core is no longer used, so
remove it.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All callers pass the session structure's hdr_len field as the header
length parameter to l2tp_xmit_skb.
Since we're passing a pointer to the session structure to l2tp_xmit_skb
anyway, there's not much point breaking the header length out as a
separate argument.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If tg3_reset_task() fails, the device state is left in an inconsistent
state with IFF_RUNNING still set but NAPI state not enabled. A
subsequent operation, such as ifdown or AER error can cause it to
soft lock up when it tries to disable NAPI state.
Fix it by bringing down the device to !IFF_RUNNING state when
tg3_reset_task() fails. tg3_reset_task() running from workqueue
will now call tg3_close() when the reset fails. We need to
modify tg3_reset_task_cancel() slightly to avoid tg3_close()
calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise
cancel_work_sync() will wait forever for tg3_reset_task() to
finish.
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Reported-by: Baptiste Covolato <baptiste@arista.com>
Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Ido Schimmel says:
====================
mlxsw: Expose critical and emergency module alarms
Amit says:
Extend hwmon interface with critical and emergency module alarms.
In case that current module temperature is higher than emergency
threshold, EMERGENCY alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)
In case that current module temperature is higher than critical
threshold, CRIT alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)
Patch set overview:
Patches #1-#2 make several changes to make the code easier to change.
Patch #3 extends the hwmon interface with the new module alarms.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new attributes to hwmon object for exposing critical and emergency
alarms.
In case that current temperature is higher than emergency threshold,
EMERGENCY alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY)
In case that current temperature is higher than critical threshold,
CRIT alarm will be reported in sensors utility:
$ sensors
...
front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT)
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really
accurate.
Add several defines to make the calculation clearer and easier to
change.
Calculate the precise high bound of number of attributes that may be
needed.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show()
and mlxsw_hwmon_module_temp_emergency_show() query the relevant
temperature from firmware and fill the value in provided buffers.
Split the temperature querying functionality to individual get()
functions and call them from the show() functions.
The get() functions will be used by subsequent patches in the set.
Signed-off-by: Amit Cohen <amitc@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paul Barker says:
====================
Minor improvements to b53 dmesg output
These changes were made while debugging the b53 driver for use on a
custom board. They've been runtime tested on a patched 4.14.y kernel
which supports this board as well as build tested with 5.9-rc3. The
changes are straightforward enough that I think this testing is
sufficient but let me know if further testing is required.
Unfortunately I don't have a board to hand which boots with a more
recent kernel and has a switch supported by the b53 driver. I'd still
like to upstream these patches if possible though.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This allows us to differentiate between the possible failure modes of
b53_switch_reset() by looking at the dmesg output.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This change allows us to see which device the err or info messages are
referring to if we have multiple b53 compatible devices on a board.
As this removes the only pr_*() calls in this file we can drop the
definition of pr_fmt().
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When validating kcore modules the do_validate_kcore_modules function
checks on every kernel module dso against modules record. The
__map__is_kmodule check is used to get only kernel module dso objects
through.
Currently the bpf images are slipping through the check and making the
validation to fail, so report falls back from kcore usage to kallsyms.
Adding __map__is_bpf_image check for bpf image and adding it to
__map__is_kmodule check.
Fixes: 3c29d4483e85 ("perf annotate: Add basic support for bpf_image")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200826213017.818788-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Event modifiers are not mentioned in the perf record or perf stat
manpages. Add them to orient new users more effectively by pointing
them to the perf list manpage for details.
Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS")
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tony Jones <tonyj@suse.de>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
IS_ERR(perf_session__new())
In case of error, the function perf_session__new() returns ERR_PTR() and
never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR()
Committer notes:
This wasn't compiling due to an extraneous '{' not matched by a '}', fix
it.
Fixes: 13edc237200c ("perf bench: Add a multi-threaded synthesize benchmark")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200902140526.26916-1-yuehaibing@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There's a risk that outputting interval mode summaries by default breaks
CSV consumers. It already broke pmu-tools/toplev.
So now we turn off the summary by default but we create a new option
'--summary' to enable the summary. This is active even when not using
CSV mode.
Before:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.000265904 8,005.73 msec cpu-clock # 8.006 CPUs utilized
1.000265904 601 context-switches # 0.075 K/sec
1.000265904 10 cpu-migrations # 0.001 K/sec
1.000265904 0 page-faults # 0.000 K/sec
1.000265904 66,746,521 cycles # 0.008 GHz
1.000265904 71,874,398 instructions # 1.08 insn per cycle
1.000265904 13,356,781 branches # 1.668 M/sec
1.000265904 298,756 branch-misses # 2.24% of all branches
2.001857667 8,012.52 msec cpu-clock # 8.013 CPUs utilized
2.001857667 164 context-switches # 0.020 K/sec
2.001857667 10 cpu-migrations # 0.001 K/sec
2.001857667 2 page-faults # 0.000 K/sec
2.001857667 5,822,188 cycles # 0.001 GHz
2.001857667 2,186,170 instructions # 0.38 insn per cycle
2.001857667 442,378 branches # 0.055 M/sec
2.001857667 44,750 branch-misses # 10.12% of all branches
Performance counter stats for 'system wide':
16,018.25 msec cpu-clock # 7.993 CPUs utilized
765 context-switches # 0.048 K/sec
20 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
72,568,709 cycles # 0.005 GHz
74,060,568 instructions # 1.02 insn per cycle
13,799,159 branches # 0.861 M/sec
343,506 branch-misses # 2.49% of all branches
2.004118489 seconds time elapsed
After:
root@kbl-ppc:~# perf stat -I1000 --interval-count 2
# time counts unit events
1.001336393 8,013.28 msec cpu-clock # 8.013 CPUs utilized
1.001336393 82 context-switches # 0.010 K/sec
1.001336393 8 cpu-migrations # 0.001 K/sec
1.001336393 0 page-faults # 0.000 K/sec
1.001336393 4,199,121 cycles # 0.001 GHz
1.001336393 1,373,991 instructions # 0.33 insn per cycle
1.001336393 270,681 branches # 0.034 M/sec
1.001336393 31,659 branch-misses # 11.70% of all branches
2.003905006 8,020.52 msec cpu-clock # 8.021 CPUs utilized
2.003905006 184 context-switches # 0.023 K/sec
2.003905006 8 cpu-migrations # 0.001 K/sec
2.003905006 2 page-faults # 0.000 K/sec
2.003905006 5,446,190 cycles # 0.001 GHz
2.003905006 2,312,547 instructions # 0.42 insn per cycle
2.003905006 451,691 branches # 0.056 M/sec
2.003905006 37,925 branch-misses # 8.40% of all branches
root@kbl-ppc:~# perf stat -I1000 --interval-count 2 --summary
# time counts unit events
1.001313128 8,013.20 msec cpu-clock # 8.013 CPUs utilized
1.001313128 83 context-switches # 0.010 K/sec
1.001313128 8 cpu-migrations # 0.001 K/sec
1.001313128 0 page-faults # 0.000 K/sec
1.001313128 4,470,950 cycles # 0.001 GHz
1.001313128 1,440,045 instructions # 0.32 insn per cycle
1.001313128 283,222 branches # 0.035 M/sec
1.001313128 33,576 branch-misses # 11.86% of all branches
2.003857385 8,020.34 msec cpu-clock # 8.020 CPUs utilized
2.003857385 154 context-switches # 0.019 K/sec
2.003857385 8 cpu-migrations # 0.001 K/sec
2.003857385 2 page-faults # 0.000 K/sec
2.003857385 4,515,676 cycles # 0.001 GHz
2.003857385 2,180,449 instructions # 0.48 insn per cycle
2.003857385 435,254 branches # 0.054 M/sec
2.003857385 31,179 branch-misses # 7.16% of all branches
Performance counter stats for 'system wide':
16,033.53 msec cpu-clock # 7.992 CPUs utilized
237 context-switches # 0.015 K/sec
16 cpu-migrations # 0.001 K/sec
2 page-faults # 0.000 K/sec
8,986,626 cycles # 0.001 GHz
3,620,494 instructions # 0.40 insn per cycle
718,476 branches # 0.045 M/sec
64,755 branch-misses # 9.01% of all branches
2.006124542 seconds time elapsed
Fixes: c7e5b328a8d4 ("perf stat: Report summary for interval mode")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200903010113.32232-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|