aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-07-14Bluetooth: btmtk: apply the common btmtk_fw_get_filenameSean Wang2-12/+5
Apply the common btmtk_fw_get_filename to avoid the similar coding in each driver. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btmtk: add the function to get the fw nameSean Wang2-0/+26
Include a shared function to get the firmware name, to prevent repeating code for similar chipsets. Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btintel: Refactor btintel_set_ppag()Kiran K1-85/+34
Current flow iterates the ACPI table associated with Bluetooth controller looking for PPAG method. Method name can be directly passed to acpi_evaluate_object function instead of iterating the table. Fixes: c585a92b2f9c ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)") Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btnxpuart: Shutdown timer and prevent rearming when driver unloadingLuke Wang1-1/+1
When unload the btnxpuart driver, its associated timer will be deleted. If the timer happens to be modified at this moment, it leads to the kernel call this timer even after the driver unloaded, resulting in kernel panic. Use timer_shutdown_sync() instead of del_timer_sync() to prevent rearming. panic log: Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP Modules linked in: algif_hash algif_skcipher af_alg moal(O) mlan(O) crct10dif_ce polyval_ce polyval_generic snd_soc_imx_card snd_soc_fsl_asoc_card snd_soc_imx_audmux mxc_jpeg_encdec v4l2_jpeg snd_soc_wm8962 snd_soc_fsl_micfil snd_soc_fsl_sai flexcan snd_soc_fsl_utils ap130x rpmsg_ctrl imx_pcm_dma can_dev rpmsg_char pwm_fan fuse [last unloaded: btnxpuart] CPU: 5 PID: 723 Comm: memtester Tainted: G O 6.6.23-lts-next-06207-g4aef2658ac28 #1 Hardware name: NXP i.MX95 19X19 board (DT) pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0xffff80007a2cf464 lr : call_timer_fn.isra.0+0x24/0x80 ... Call trace: 0xffff80007a2cf464 __run_timers+0x234/0x280 run_timer_softirq+0x20/0x40 __do_softirq+0x100/0x26c ____do_softirq+0x10/0x1c call_on_irq_stack+0x24/0x4c do_softirq_own_stack+0x1c/0x2c irq_exit_rcu+0xc0/0xdc el0_interrupt+0x54/0xd8 __el0_irq_handler_common+0x18/0x24 el0t_64_irq_handler+0x10/0x1c el0t_64_irq+0x190/0x194 Code: ???????? ???????? ???????? ???????? (????????) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,c0000000,40028143,1000721b Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- Signed-off-by: Luke Wang <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btnxpuart: Handle FW Download Abort scenarioNeeraj Sanjay Kale1-14/+33
This adds a new flag BTNXPUART_FW_DOWNLOAD_ABORT which handles the situation where driver is removed while firmware download is in progress. logs: modprobe btnxpuart [65239.230431] Bluetooth: hci0: ChipID: 7601, Version: 0 [65239.236670] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se rmmod btnxpuart [65241.425300] Bluetooth: hci0: FW Download Aborted Signed-off-by: Neeraj Sanjay Kale <[email protected]> Tested-by: Guillaume Legoupil <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btnxpuart: Enable status prints for firmware downloadNeeraj Sanjay Kale1-4/+5
This enables prints for firmware download which can help automation tests to verify firmware download functionality. dmesg logs before: modprobe btnxpuart [ 1999.187264] Bluetooth: MGMT ver 1.22 dmesg logs with this patch: modprobe btnxpuart [16179.758515] Bluetooth: hci0: ChipID: 7601, Version: 0 [16179.764748] Bluetooth: hci0: Request Firmware: nxp/uartspi_n61x_v1.bin.se [16181.217490] Bluetooth: hci0: FW Download Complete: 372696 bytes [16182.701398] Bluetooth: MGMT ver 1.22 Signed-off-by: Neeraj Sanjay Kale <[email protected]> Tested-by: Guillaume Legoupil <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: btnxpuart: Fix Null pointer dereference in btnxpuart_flush()Neeraj Sanjay Kale1-4/+8
This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <[email protected]> Tested-by: Guillaume Legoupil <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: hci_bcm4377: Increase boot timeoutHector Martin1-1/+2
BCM4388 takes over 2 seconds to boot, so increase the timeout. Signed-off-by: Hector Martin <[email protected]> Reviewed-by: Sven Peter <[email protected]> Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: hci_bcm4377: Use correct unit for timeoutsSven Peter1-1/+1
BCM4377_TIMEOUT is always used to wait for completitions and their API expects a timeout in jiffies instead of msecs. Fixes: 8a06127602de ("Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards") Signed-off-by: Sven Peter <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Bluetooth: MGMT: Make MGMT_OP_LOAD_CONN_PARAM update existing connectionLuiz Augusto von Dentz3-2/+69
This makes MGMT_OP_LOAD_CONN_PARAM update existing connection by dectecting the request is just for one connection, parameters already exists and there is a connection. Since this is a new behavior the revision is also updated to enable userspace to detect it. Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-07-14Linux 6.10Linus Torvalds1-1/+1
2024-07-14Merge tag 'kbuild-fixes-v6.10-4' of ↵Linus Torvalds3-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Make scripts/ld-version.sh robust against the latest LLD - Fix warnings in rpm-pkg with device tree support - Fix warnings in fortify tests with KASAN * tag 'kbuild-fixes-v6.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: fortify: fix warnings in fortify tests with KASAN kbuild: rpm-pkg: avoid the warnings with dtb's listed twice kbuild: Make ld-version.sh more robust against version string changes
2024-07-15fortify: fix warnings in fortify tests with KASANMasahiro Yamada1-0/+4
When a software KASAN mode is enabled, the fortify tests emit warnings on some architectures. For example, for ARCH=arm, the combination of CONFIG_FORTIFY_SOURCE=y and CONFIG_KASAN=y produces the following warnings: TEST lib/test_fortify/read_overflow-memchr.log warning: unsafe memchr() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memchr.c TEST lib/test_fortify/read_overflow-memchr_inv.log warning: unsafe memchr_inv() usage lacked '__read_overflow' symbol in lib/test_fortify/read_overflow-memchr_inv.c TEST lib/test_fortify/read_overflow-memcmp.log warning: unsafe memcmp() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memcmp.c TEST lib/test_fortify/read_overflow-memscan.log warning: unsafe memscan() usage lacked '__read_overflow' symbol in lib/test_fortify/read_overflow-memscan.c TEST lib/test_fortify/read_overflow2-memcmp.log warning: unsafe memcmp() usage lacked '__read_overflow2' warning in lib/test_fortify/read_overflow2-memcmp.c [ more and more similar warnings... ] Commit 9c2d1328f88a ("kbuild: provide reasonable defaults for tool coverage") removed KASAN flags from non-kernel objects by default. It was an intended behavior because lib/test_fortify/*.c are unit tests that are not linked to the kernel. As it turns out, some architectures require -fsanitize=kernel-(hw)address to define __SANITIZE_ADDRESS__ for the fortify tests. Without __SANITIZE_ADDRESS__ defined, arch/arm/include/asm/string.h defines __NO_FORTIFY, thus excluding <linux/fortify-string.h>. This issue does not occur on x86 thanks to commit 4ec4190be4cf ("kasan, x86: don't rename memintrinsics in uninstrumented files"), but there are still some architectures that define __NO_FORTIFY in such a situation. Set KASAN_SANITIZE=y explicitly to the fortify tests. Fixes: 9c2d1328f88a ("kbuild: provide reasonable defaults for tool coverage") Reported-by: Arnd Bergmann <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Masahiro Yamada <[email protected]>
2024-07-14hwmon: (max6697) Fix swapped temp{1,8} critical alarmsGuenter Roeck1-2/+2
The critical alarm bit for the local temperature sensor (temp1) is in bit 7 of register 0x45 (not bit 6), and the critical alarm bit for remote temperature sensor 7 (temp8) is in bit 6 (not bit 7). This only affects MAX6581 since all other chips supported by this driver do not support those critical alarms. Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles") Reviewed-by: Tzung-Bi Shih <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-07-14hwmon: (max6697) Fix underflow when writing limit attributesGuenter Roeck1-0/+1
Using DIV_ROUND_CLOSEST() on an unbound value can result in underflows. Indeed, module test scripts report: temp1_max: Suspected underflow: [min=0, read 255000, written -9223372036854775808] temp1_crit: Suspected underflow: [min=0, read 255000, written -9223372036854775808] Fix by introducing an extra set of clamping. Fixes: 5372d2d71c46 ("hwmon: Driver for Maxim MAX6697 and compatibles") Reviewed-by: Tzung-Bi Shih <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-07-14hwmon: Remove obsolete adm1021 and max6642 driversGuenter Roeck7-1025/+0
ADM1021, MAX6642, and compatible chips are supported by the lm90 driver. Remove the obsolete stand-alone drivers to reduce maintenance overhead. Reviewed-by: Tzung-Bi Shih <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-07-15kbuild: rpm-pkg: avoid the warnings with dtb's listed twiceJose Ignacio Tornos Martinez1-1/+0
After 8d1001f7bdd0 (kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n), the following warning "warning: File listed twice: *.dtb" is appearing for every dtb file that is included. The reason is that the commented commit already adds the folder /lib/modules/%{KERNELRELEASE} in kernel.list file so the folder /lib/modules/%{KERNELRELEASE}/dtb is no longer necessary, just remove it. Fixes: 8d1001f7bdd0 ("kbuild: rpm-pkg: fix build error with CONFIG_MODULES=n") Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-07-15kbuild: Make ld-version.sh more robust against version string changesNathan Chancellor1-3/+5
After [1] in upstream LLVM, ld.lld's version output became slightly different when the cmake configuration option LLVM_APPEND_VC_REV is disabled. Before: Debian LLD 19.0.0 (compatible with GNU linkers) After: Debian LLD 19.0.0, compatible with GNU linkers This results in ld-version.sh failing with scripts/ld-version.sh: 18: arithmetic expression: expecting EOF: "10000 * 19 + 100 * 0 + 0," because the trailing comma is included in the patch level part of the expression. While [1] has been partially reverted in [2] to avoid this breakage (as it impacts the configuration stage and it is present in all LTS branches), it would be good to make ld-version.sh more robust against such miniscule changes like this one. Use POSIX shell parameter expansion [3] to remove the largest suffix after just numbers and periods, replacing of the current removal of everything after a hyphen. ld-version.sh continues to work for a number of distributions (Arch Linux, Debian, and Fedora) and the kernel.org toolchains and no longer errors on a version of ld.lld with [1]. Fixes: 02aff8592204 ("kbuild: check the minimum linker version in Kconfig") Link: https://github.com/llvm/llvm-project/commit/0f9fbbb63cfcd2069441aa2ebef622c9716f8dbb [1] Link: https://github.com/llvm/llvm-project/commit/649cdfc4b6781a350dfc87d9b2a4b5a4c3395909 [2] Link: https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html [3] Suggested-by: Fangrui Song <[email protected]> Reviewed-by: Fangrui Song <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Nicolas Schier <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-07-14Merge tag 'sched_urgent_for_v6.10' of ↵Linus Torvalds6-20/+39
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Fix a performance regression when measuring the CPU time of a thread (clock_gettime(CLOCK_THREAD_CPUTIME_ID,...)) due to the addition of PSI IRQ time accounting in the hotpath - Fix a task_struct leak due to missing to decrement the refcount when the task is enqueued before the timer which is supposed to do that, expires - Revert an attempt to expedite detaching of movable tasks, as finding those could become very costly. Turns out the original issue wasn't even hit by anyone * tag 'sched_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Move psi_account_irqtime() out of update_rq_clock_task() hotpath sched/deadline: Fix task_struct reference leak Revert "sched/fair: Make sure to try to detach at least one movable task"
2024-07-14Merge tag 'x86_urgent_for_v6.10' of ↵Linus Torvalds1-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Borislav Petkov: - Make sure TF is cleared before calling other functions (BHI mitigation in this case) in the SYSENTER compat handler, as otherwise it will warn about being in single-step mode * tag 'x86_urgent_for_v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bhi: Avoid warning in #DB handler due to BHI mitigation
2024-07-14Merge tag 'ipsec-next-2024-07-13' of ↵Jakub Kicinski16-10/+393
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2024-07-13 1) Support sending NAT keepalives in ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it. From Eyal Birger. 2) Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths. Currently, IPsec crypto offload is enabled for GRO code path only. This patchset support UDP encapsulation for the non GRO path. From Mike Yu. * tag 'ipsec-next-2024-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Support crypto offload for outbound IPv4 UDP-encapsulated ESP packet xfrm: Support crypto offload for inbound IPv4 UDP-encapsulated ESP packet xfrm: Allow UDP encapsulation in crypto offload control path xfrm: Support crypto offload for inbound IPv6 ESP packets not in GRO path xfrm: support sending NAT keepalives in ESP in UDP states ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch 'introduce-en7581-ethernet-support'Jakub Kicinski5-1/+2892
Lorenzo Bianconi says: ==================== Introduce EN7581 ethernet support Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board. EN7581 mac controller is mainly composed by Frame Engine (FE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are supported now) while QDMA is used for DMA operation and QOS functionalities between mac layer and the dsa switch (hw QoS is not available yet and it will be added in the future). Currently only hw lan features are available, hw wan will be added with subsequent patches. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: airoha: Introduce ethernet support for EN7581 SoCLorenzo Bianconi4-1/+2749
Add airoha_eth driver in order to introduce ethernet support for Airoha EN7581 SoC available on EN7581 development board (en7581-evb). EN7581 mac controller is mainly composed by the Frame Engine (PSE+PPE) and QoS-DMA (QDMA) modules. FE is used for traffic offloading (just basic functionalities are currently supported) while QDMA is used for DMA operations and QOS functionalities between the mac layer and the external modules conncted to the FE GDM ports (e.g MT7530 DSA switch or external phys). A general overview of airoha_eth architecture is reported below: ┌───────┐ ┌───────┐ │ QDMA2 │ │ QDMA1 │ └───┬───┘ └───┬───┘ │ │ ┌───────▼─────────────────────────────────────────────▼────────┐ │ │ │ P5 P0 │ │ │ │ │ │ │ ┌──────┐ │ P3 ├────► GDM3 │ │ │ └──────┘ │ │ │ │ ┌─────┐ │ │ │ PPE ◄────┤ P4 PSE │ └─────┘ │ │ │ │ │ │ │ │ ┌──────┐ │ P9 ├────► GDM4 │ │ │ └──────┘ │ │ │ │ │ │ │ P2 P1 │ └─────────┬───────────────────────────────────────────┬────────┘ │ │ ┌───▼──┐ ┌──▼───┐ │ GDM2 │ │ GDM1 │ └──────┘ └──┬───┘ │ ┌────▼─────┐ │ MT7530 │ └──────────┘ Currently only hw LAN features (QDMA1+GDM1) are available while hw WAN (QDMA2+GDM{2,3,4}) ones will be added with subsequent patches introducing traffic offloading support. Tested-by: Benjamin Larsson <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://patch.msgid.link/274945d2391c195098ab180a46d0617b18b9e42c.1720818878.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14dt-bindings: net: airoha: Add EN7581 ethernet controllerLorenzo Bianconi1-0/+143
Introduce device-tree binding documentation for Airoha EN7581 ethernet mac controller. Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://patch.msgid.link/7dfecf8aa4e6519562a94455b95c49e1b3c858a0.1720818878.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: netconsole: Disable target before netpoll cleanupBreno Leitao1-1/+1
Currently, netconsole cleans up the netpoll structure before disabling the target. This approach can lead to race conditions, as message senders (write_ext_msg() and write_msg()) check if the target is enabled before using netpoll. The sender can validate that the target is enabled, but, the netpoll might be de-allocated already, causing undesired behaviours. This patch reverses the order of operations: 1. Disable the target 2. Clean up the netpoll structure This change eliminates the potential race condition, ensuring that no messages are sent through a partially cleaned-up netpoll structure. Fixes: 2382b15bcc39 ("netconsole: take care of NETDEV_UNREGISTER event") Cc: [email protected] Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch '100GbE' of ↵Jakub Kicinski6-496/+272
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: Switch API optimizations Marcin Szycik says: Optimize the process of creating a recipe in the switch block by removing duplicate switch ID words and changing how result indexes are fitted into recipes. In many cases this can decrease the number of recipes required to add a certain set of rules, potentially allowing a more varied set of rules to be created. Total rule count will also increase, since less words will be left unused/wasted. There are only 64 rules available in total, so every one counts. After this modification, many fields and some structs became unused or were simplified, resulting in overall simpler implementation. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add tracepoint for adding and removing switch rules ice: Remove unused members from switch API ice: Optimize switch recipe creation ice: remove unused recipe bookkeeping data ice: Simplify bitmap setting in adding recipe ice: Remove reading all recipes before adding a new one ice: Remove unused struct ice_prot_lkup_ext members ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch 'vrf-fix-source-address-selection-with-route-leak'Jakub Kicinski6-12/+120
Nicolas Dichtel says: ==================== vrf: fix source address selection with route leak For patch 1 and 2, I didn't find the exact commit that introduced this bug, but I suspect it has been here since the first version. I arbitrarily choose one. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14selftests: vrf_route_leaking: add local testNicolas Dichtel1-2/+91
The goal is to check that the source address selected by the kernel is routable when a leaking route is used. ICMP, TCP and UDP connections are tested. The symmetric topology is enough for this test. Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14ipv6: take care of scope when choosing the src addrNicolas Dichtel1-1/+2
When the source address is selected, the scope must be checked. For example, if a loopback address is assigned to the vrf device, it must not be chosen for packets sent outside. CC: [email protected] Fixes: afbac6010aec ("net: ipv6: Address selection needs to consider L3 domains") Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14ipv6: fix source address selection with route leakNicolas Dichtel3-7/+16
By default, an address assigned to the output interface is selected when the source address is not specified. This is problematic when a route, configured in a vrf, uses an interface from another vrf (aka route leak). The original vrf does not own the selected source address. Let's add a check against the output interface and call the appropriate function to select the source address. CC: [email protected] Fixes: 0d240e7811c4 ("net: vrf: Implement get_saddr for IPv6") Signed-off-by: Nicolas Dichtel <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14ipv4: fix source address selection with route leakNicolas Dichtel1-2/+11
By default, an address assigned to the output interface is selected when the source address is not specified. This is problematic when a route, configured in a vrf, uses an interface from another vrf (aka route leak). The original vrf does not own the selected source address. Let's add a check against the output interface and call the appropriate function to select the source address. CC: [email protected] Fixes: 8cbb512c923d ("net: Add source address lookup op for VRF") Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14selftests: forwarding: devlink_lib: Wait for udev events after reloadingAmit Cohen1-0/+2
Lately, an additional locking was added by commit c0a40097f0bc ("drivers: core: synchronize really_probe() and dev_uevent()"). The locking protects dev_uevent() calling. This function is used to send messages from the kernel to user space. Uevent messages notify user space about changes in device states, such as when a device is added, removed, or changed. These messages are used by udev (or other similar user-space tools) to apply device-specific rules. After reloading devlink instance, udev events should be processed. This locking causes a short delay of udev events handling. One example for useful udev rule is renaming ports. 'forwading.config' can be configured to use names after udev rules are applied. Some tests run devlink_reload() and immediately use the updated names. This worked before the above mentioned commit was pushed, but now the delay of uevent messages causes that devlink_reload() returns before udev events are handled and tests fail. Adjust devlink_reload() to not assume that udev events are already processed when devlink reload is done, instead, wait for udev events to ensure they are processed before returning from the function. Without this patch: TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp1/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory sysctl: cannot stat /proc/sys/net/ipv6/conf/swp2/disable_ipv6: No such file or directory Cannot find device "swp1" Cannot find device "swp2" TEST: setup_wait_dev (: Interface swp1 does not come up.) [FAIL] With this patch: $ TESTS='rif_mac_profile' ./resource_scale.sh TEST: 'rif_mac_profile' 4 [ OK ] TEST: 'rif_mac_profile' overflow 5 [ OK ] This is relevant not only for this test. Fixes: bc7cbb1e9f4c ("selftests: forwarding: Add devlink_lib.sh") Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/89367666e04b38a8993027f1526801ca327ab96a.1720709333.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge branch ↵Jakub Kicinski2-5/+7
'net-pse-pd-fix-possible-issues-with-a-pse-supporting-both-c33-and-podl' Kory Maincent says: ==================== net: pse-pd: Fix possible issues with a PSE supporting both c33 and PoDL Although PSE controllers supporting both c33 and PoDL are not on the market yet, we want to prevent potential issues from arising in the future. Two possible issues could occur with a PSE supporting both c33 and PoDL: - Setting the config for one type of PSE leaves the other type's config null. In this case, the PSE core would return EOPNOTSUPP, which is not the correct behavior. - Null dereference of Netlink attributes as only one of the Netlink attributes would be specified at a time. This patch series contains two patches to fix these issues. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: ethtool: pse-pd: Fix possible null-derefKory Maincent1-2/+2
Fix a possible null dereference when a PSE supports both c33 and PoDL, but only one of the netlink attributes is specified. The c33 or PoDL PSE capabilities are already validated in the ethnl_set_pse_validate() call. Signed-off-by: Kory Maincent <[email protected]> Reported-by: Jakub Kicinski <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Fixes: 4d18e3ddf427 ("net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface") Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14net: pse-pd: Do not return EOPNOSUPP if config is nullKory Maincent2-3/+5
For a PSE supporting both c33 and PoDL, setting config for one type of PoE leaves the other type's config null. Currently, this case returns EOPNOTSUPP, which is incorrect. Instead, we should do nothing if the configuration is empty. Signed-off-by: Kory Maincent <[email protected]> Fixes: d83e13761d5b ("net: pse-pd: Use regulator framework within PSE framework") Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-14Merge tag 'ipsec-2024-07-11' of ↵Jakub Kicinski9-43/+92
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2024-07-11 1) Fix esp_output_tail_tcp() on unsupported ESPINTCP. From Hagar Hemdan. 2) Fix two bugs in the recently introduced SA direction separation. From Antony Antony. 3) Fix unregister netdevice hang on hardware offload. We had to add another list where skbs linked to that are unlinked from the lists (deleted) but not yet freed. 4) Fix netdev reference count imbalance in xfrm_state_find. From Jianbo Liu. 5) Call xfrm_dev_policy_delete when killingi them on offloaded policies. Jianbo Liu. * tag 'ipsec-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: call xfrm_dev_policy_delete when kill policy xfrm: fix netdev reference count imbalance xfrm: Export symbol xfrm_dev_state_delete. xfrm: Fix unregister netdevice hang on hardware offload. xfrm: Log input direction mismatch error in one place xfrm: Fix input error path memory access net: esp: cleanup esp_output_tail_tcp() in case of unsupported ESPINTCP ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13randomize_kstack: Improve stack alignment codegenKees Cook1-6/+12
The codgen for adding architecture-specific stack alignment to the effective alloca() usage is somewhat inefficient and allows a bit to get carried beyond the desired entropy range. This isn't really a problem, but it's unexpected and the codegen is kind of bad. Quoting Mark[1], the disassembly for arm64's invoke_syscall() looks like: // offset = raw_cpu_read(kstack_offset) mov x4, sp adrp x0, kstack_offset mrs x5, tpidr_el1 add x0, x0, #:lo12:kstack_offset ldr w0, [x0, x5] // offset = KSTACK_OFFSET_MAX(offset) and x0, x0, #0x3ff // alloca(offset) add x0, x0, #0xf and x0, x0, #0x7f0 sub sp, x4, x0 ... which in C would be: offset = raw_cpu_read(kstack_offset) offset &= 0x3ff; // [0x0, 0x3ff] offset += 0xf; // [0xf, 0x40e] offset &= 0x7f0; // [0x0, ... so when *all* bits [3:0] are 0, they'll have no impact, and when *any* of bits [3:0] are 1 they'll trigger a carry into bit 4, which could ripple all the way up and spill into bit 10. Switch the masking in KSTACK_OFFSET_MAX() to explicitly clear the bottom bits to avoid the rounding by using 0b1111110000 instead of 0b1111111111: // offset = raw_cpu_read(kstack_offset) mov x4, sp adrp x0, 0 <kstack_offset> mrs x5, tpidr_el1 add x0, x0, #:lo12:kstack_offset ldr w0, [x0, x5] // offset = KSTACK_OFFSET_MAX(offset) and x0, x0, #0x3f0 // alloca(offset) sub sp, x4, x0 Suggested-by: Mark Rutland <[email protected]> Link: https://lore.kernel.org/lkml/ZnVfOnIuFl2kNWkT@J2N7QTR9R3/ [1] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]>
2024-07-13exec: Avoid pathological argc, envc, and bprm->p valuesKees Cook2-2/+36
Make sure nothing goes wrong with the string counters or the bprm's belief about the stack pointer. Add checks and matching self-tests. Take special care for !CONFIG_MMU, since argmin is not exposed there. For 32-bit validation, 32-bit UML was used: $ tools/testing/kunit/kunit.py run \ --make_options CROSS_COMPILE=i686-linux-gnu- \ --make_options SUBARCH=i386 \ exec For !MMU validation, m68k was used: $ tools/testing/kunit/kunit.py run \ --arch m68k --make_option CROSS_COMPILE=m68k-linux-gnu- \ exec Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]>
2024-07-13execve: Keep bprm->argmin behind CONFIG_MMUKees Cook3-7/+23
When argmin was added in commit 655c16a8ce9c ("exec: separate MM_ANONPAGES and RLIMIT_STACK accounting"), it was intended only for validating stack limits on CONFIG_MMU[1]. All checking for reaching the limit (argmin) is wrapped in CONFIG_MMU ifdef checks, though setting argmin was not. That argmin is only supposed to be used under CONFIG_MMU was rediscovered recently[2], and I don't want to trip over this again. Move argmin's declaration into the existing CONFIG_MMU area, and add helpers functions so the MMU tests can be consolidated. Link: https://lore.kernel.org/all/[email protected] [1] Link: https://lore.kernel.org/all/202406211253.7037F69@keescook/ [2] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Kees Cook <[email protected]>
2024-07-13Merge tag 'i2c-for-6.10-rc8' of ↵Linus Torvalds5-29/+31
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Fixes for the I2C testunit, the Renesas R-Car driver and some MAINTAINERS corrections" * tag 'i2c-for-6.10-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: testunit: avoid re-issued work after read message i2c: rcar: ensure Gen3+ reset does not disturb local targets i2c: mark HostNotify target address as used i2c: testunit: correct Kconfig description MAINTAINERS: VIRTIO I2C loses a maintainer, gains a reviewer MAINTAINERS: delete entries for Thor Thayer i2c: rcar: clear NO_RXDMA flag after resetting i2c: rcar: bring hardware to known state when probing
2024-07-13Merge branch '40GbE' of ↵Jakub Kicinski24-50/+167
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-07-11 (net/intel) This series contains updates to most Intel network drivers. Tony removes MODULE_AUTHOR from drivers containing the entry. Simon Horman corrects a kdoc entry for i40e. Pawel adds implementation for devlink param "local_forwarding" on ice. Michal removes unneeded call, and code, for eswitch rebuild for ice. Sasha removed a no longer used field from igc. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Remove the internal 'eee_advert' field ice: remove eswitch rebuild ice: Add support for devlink local_forwarding param i40e: correct i40e_addr_to_hkey() name in kdoc net: intel: Remove MODULE_AUTHORs ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13sfc: falcon: Make I2C terminology more inclusiveEaswar Hariharan1-1/+1
I2C v7, SMBus 3.2, and I3C 1.1.1 specifications have replaced "master/slave" with more appropriate terms. Inspired by Wolfram's series to fix drivers/i2c/, fix the terminology for users of I2C_ALGOBIT bitbanging interface, now that the approved verbiage exists in the specification. Reviewed-by: Martin Habets <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Easwar Hariharan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: phy: dp83td510: add cable testing supportOleksij Rempel1-0/+264
This patch implements the TDR test procedure as described in "Application Note DP83TD510E Cable Diagnostics Toolkit revC", section 3.2. The procedure was tested with "draka 08 signalkabel 2x0.8mm". The reported cable length was 5 meters more for each 20 meters of actual cable length. For instance, a 20-meter cable showed as 25 meters, and a 40-meter cable showed as 50 meters. Since other parts of the diagnostics provided by this PHY (e.g., Active Link Cable Diagnostics) require accurate cable characterization to provide proper results, this tuning can be implemented in a separate patch/interface. Signed-off-by: Oleksij Rempel <[email protected]> changes v2: - add comments - change post silence time to 1000ms Reviewed-by: Andrew Lunn <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net: dpaa: Fix compilation WarningBreno Leitao1-2/+0
Remove variables that are defined and incremented but never read. This issue appeared in network tests[1] as: drivers/net/ethernet/freescale/dpaa/dpaa_eth_sysfs.c:38:6: warning: variable 'i' set but not used [-Wunused-but-set-variable] 38 | int i = 0; | ^ Link: https://netdev.bots.linux.dev/static/nipa/870263/13729811/build_clang/stderr [1] Signed-off-by: Breno Leitao <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13eth: mlx5: expose NETIF_F_NTUPLE when ARFS is compiled outJakub Kicinski5-12/+24
ARFS depends on NTUPLE filters, but the inverse is not true. Drivers which don't support ARFS commonly still support NTUPLE filtering. mlx5 has a Kconfig option to disable ARFS (MLX5_EN_ARFS) and does not advertise NTUPLE filters as a feature at all when ARFS is compiled out. That's not correct, ntuple filters indeed still work just fine (as long as MLX5_EN_RXNFC is enabled). This is needed to make the RSS test not skip all RSS context related testing. Acked-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13selftests: mptcp: lib: fix shellcheck errorsMatthieu Baerts (NGI0)1-2/+2
It looks like we missed these two errors recently: - SC2068: Double quote array expansions to avoid re-splitting elements. - SC2145: Argument mixes string and array. Use * or separate argument. Two simple fixes, it is not supposed to change the behaviour as the variable names should not have any spaces in their names. Still, better to fix them to easily spot new issues. Fixes: f265d3119a29 ("selftests: mptcp: lib: use setup/cleanup_ns helpers") Signed-off-by: Matthieu Baerts (NGI0) <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://patch.msgid.link/20240712-upstream-net-next-20240712-selftests-mptcp-fix-shellcheck-v1-1-1cb7180db40a@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13Merge branch 'mlx5-misc-2023-07-08-sf-max-eq'Jakub Kicinski6-12/+41
Saeed Mahameed says: ==================== mlx5 misc 2023-07-08 (sf max eq) Link: https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Use set number of max EQsDaniel Jurgens2-10/+9
If a maximum number of EQs has been set for an SF, use that amount. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Set default max eqs for SFsDaniel Jurgens3-1/+26
If the user hasn't configured max_io_eqs set a low default. The SF driver shouldn't try to create more than this, but FW will enforce this limit. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-13net/mlx5: Set sf_eq_usage for SF max EQsDaniel Jurgens1-0/+3
When setting max_io_eqs for an SF function also set the sf_eq_usage_cap. This is to indicate to the SF driver from the PF that the user has set the max io eqs via devlink. So the SF driver can later query the proper max eq value from the new cap. Signed-off-by: Daniel Jurgens <[email protected]> Reviewed-by: William Tu <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.