| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode / dentry updates from Christian Brauner:
"This contains smaller performance improvements to inodes and dentries:
inode:
- Add rcu based inode lookup variants.
They avoid one inode hash lock acquire in the common case thereby
significantly reducing contention. We already support RCU-based
operations but didn't take advantage of them during inode
insertion.
Callers of iget_locked() get the improvement without any code
changes. Callers that need a custom callback can switch to
iget5_locked_rcu() as e.g., did btrfs.
With 20 threads each walking a dedicated 1000 dirs * 1000 files
directory tree to stat(2) on a 32 core + 24GB ram vm:
before: 3.54s user 892.30s system 1966% cpu 45.549 total
after: 3.28s user 738.66s system 1955% cpu 37.932 total (-16.7%)
Long-term we should pick up the effort to introduce more
fine-grained locking and possibly improve on the currently used
hash implementation.
- Start zeroing i_state in inode_init_always() instead of doing it in
individual filesystems.
This allows us to remove an unneeded lock acquire in new_inode()
and not burden individual filesystems with this.
dcache:
- Move d_lockref out of the area used by RCU lookup to avoid
cacheline ping poing because the embedded name is sharing a
cacheline with d_lockref.
- Fix dentry size on 32bit with CONFIG_SMP=y so it does actually end
up with 128 bytes in total"
* tag 'vfs-6.11.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: fix dentry size
vfs: move d_lockref out of the area used by RCU lookup
bcachefs: remove now spurious i_state initialization
xfs: remove now spurious i_state initialization in xfs_inode_alloc
vfs: partially sanitize i_state zeroing on inode creation
xfs: preserve i_state around inode_init_always in xfs_reinit_inode
btrfs: use iget5_locked_rcu
vfs: add rcu-based find_inode variants for iget ops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount API updates from Christian Brauner:
- Add a generic helper to parse uid and gid mount options.
Currently we open-code the same logic in various filesystems which is
error prone, especially since the verification of uid and gid mount
options is a sensitive operation in the face of idmappings.
Add a generic helper and convert all filesystems over to it. Make
sure that filesystems that are mountable in unprivileged containers
verify that the specified uid and gid can be represented in the
owning namespace of the filesystem.
- Convert hostfs to the new mount api.
* tag 'vfs-6.11.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fuse: Convert to new uid/gid option parsing helpers
fuse: verify {g,u}id mount options correctly
fat: Convert to new uid/gid option parsing helpers
fat: Convert to new mount api
fat: move debug into fat_mount_options
vboxsf: Convert to new uid/gid option parsing helpers
tracefs: Convert to new uid/gid option parsing helpers
smb: client: Convert to new uid/gid option parsing helpers
tmpfs: Convert to new uid/gid option parsing helpers
ntfs3: Convert to new uid/gid option parsing helpers
isofs: Convert to new uid/gid option parsing helpers
hugetlbfs: Convert to new uid/gid option parsing helpers
ext4: Convert to new uid/gid option parsing helpers
exfat: Convert to new uid/gid option parsing helpers
efivarfs: Convert to new uid/gid option parsing helpers
debugfs: Convert to new uid/gid option parsing helpers
autofs: Convert to new uid/gid option parsing helpers
fs_parse: add uid & gid option option parsing helpers
hostfs: Add const qualifier to host_root in hostfs_fill_super()
hostfs: convert hostfs to use the new mount API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs casefolding updates from Christian Brauner:
"This contains some work to simplify the handling of casefolded names:
- Simplify the handling of casefolded names in f2fs and ext4 by
keeping the names as a qstr to avoiding unnecessary conversions
- Introduce a new generic_ci_match() libfs case-insensitive lookup
helper and use it in both f2fs and ext4 allowing to remove the
filesystem specific implementations
- Remove a bunch of ifdefs by making the unicode build checks part of
the code flow"
* tag 'vfs-6.11.casefold' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
f2fs: Move CONFIG_UNICODE defguards into the code flow
ext4: Move CONFIG_UNICODE defguards into the code flow
f2fs: Reuse generic_ci_match for ci comparisons
ext4: Reuse generic_ci_match for ci comparisons
libfs: Introduce case-insensitive string comparison helper
f2fs: Simplify the handling of cached casefolded names
ext4: Simplify the handling of cached casefolded names
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs module description updates from Christian Brauner:
"This contains patches to add module descriptions to all modules under
fs/ currently lacking them"
* tag 'vfs-6.11.module.description' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
openpromfs: add missing MODULE_DESCRIPTION() macro
fs: nls: add missing MODULE_DESCRIPTION() macros
fs: autofs: add MODULE_DESCRIPTION()
fs: fat: add missing MODULE_DESCRIPTION() macros
fs: binfmt: add missing MODULE_DESCRIPTION() macros
fs: cramfs: add MODULE_DESCRIPTION()
fs: hfs: add MODULE_DESCRIPTION()
fs: hpfs: add MODULE_DESCRIPTION()
qnx4: add MODULE_DESCRIPTION()
qnx6: add MODULE_DESCRIPTION()
fs: sysv: add MODULE_DESCRIPTION()
fs: efs: add MODULE_DESCRIPTION()
fs: minix: add MODULE_DESCRIPTION()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull PG_error removal updates from Christian Brauner:
"This contains work to remove almost all remaining users of PG_error
from filesystems and filesystem helper libraries. An additional patch
will be coming in via the jfs tree which tests the PG_error bit.
Afterwards nothing will be testing it anymore and it's safe to remove
all places which set or clear the PG_error bit.
The goal is to fully remove PG_error by the next merge window"
* tag 'vfs-6.11.pg_error' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
buffer: Remove calls to set and clear the folio error flag
iomap: Remove calls to set and clear folio error flag
vboxsf: Convert vboxsf_read_folio() to use a folio
ufs: Remove call to set the folio error flag
romfs: Convert romfs_read_folio() to use a folio
reiserfs: Remove call to folio_set_error()
orangefs: Remove calls to set/clear the error flag
nfs: Remove calls to folio_set_error
jffs2: Remove calls to set/clear the folio error flag
hostfs: Convert hostfs_read_folio() to use a folio
isofs: Convert rock_ridge_symlink_read_folio to use a folio
hpfs: Convert hpfs_symlink_read_folio to use a folio
efs: Convert efs_symlink_read_folio to use a folio
cramfs: Convert cramfs_read_folio to use a folio
coda: Convert coda_symlink_filler() to use folio_end_read()
befs: Convert befs_symlink_read_folio() to use folio_end_read()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Support passing NULL along AT_EMPTY_PATH for statx().
NULL paths with any flag value other than AT_EMPTY_PATH go the
usual route and end up with -EFAULT to retain compatibility (Rust
is abusing calls of the sort to detect availability of statx)
This avoids path lookup code, lockref management, memory allocation
and in case of NULL path userspace memory access (which can be
quite expensive with SMAP on x86_64)
- Don't block i_writecount during exec. Remove the
deny_write_access() mechanism for executables
- Relax open_by_handle_at() permissions in specific cases where we
can prove that the caller had sufficient privileges to open a file
- Switch timespec64 fields in struct inode to discrete integers
freeing up 4 bytes
Fixes:
- Fix false positive circular locking warning in hfsplus
- Initialize hfs_inode_info after hfs_alloc_inode() in hfs
- Avoid accidental overflows in vfs_fallocate()
- Don't interrupt fallocate with EINTR in tmpfs to avoid constantly
restarting shmem_fallocate()
- Add missing quote in comment in fs/readdir
Cleanups:
- Don't assign and test in an if statement in mqueue. Move the
assignment out of the if statement
- Reflow the logic in may_create_in_sticky()
- Remove the usage of the deprecated ida_simple_xx() API from procfs
- Reject FSCONFIG_CMD_CREATE_EXCL requets that depend on the new
mount api early
- Rename variables in copy_tree() to make it easier to understand
- Replace WARN(down_read_trylock, ...) abuse with proper asserts in
various places in the VFS
- Get rid of user_path_at_empty() and drop the empty argument from
getname_flags()
- Check for error while copying and no path in one branch in
getname_flags()
- Avoid redundant smp_mb() for THP handling in do_dentry_open()
- Rename parent_ino to d_parent_ino and make it use RCU
- Remove unused header include in fs/readdir
- Export in_group_capable() helper and switch f2fs and fuse over to
it instead of open-coding the logic in both places"
* tag 'vfs-6.11.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (27 commits)
ipc: mqueue: remove assignment from IS_ERR argument
vfs: rename parent_ino to d_parent_ino and make it use RCU
vfs: support statx(..., NULL, AT_EMPTY_PATH, ...)
stat: use vfs_empty_path() helper
fs: new helper vfs_empty_path()
fs: reflow may_create_in_sticky()
vfs: remove redundant smp_mb for thp handling in do_dentry_open
fuse: Use in_group_or_capable() helper
f2fs: Use in_group_or_capable() helper
fs: Export in_group_or_capable()
vfs: reorder checks in may_create_in_sticky
hfs: fix to initialize fields of hfs_inode_info after hfs_alloc_inode()
proc: Remove usage of the deprecated ida_simple_xx() API
hfsplus: fix to avoid false alarm of circular locking
Improve readability of copy_tree
vfs: shave a branch in getname_flags
vfs: retire user_path_at_empty and drop empty arg from getname_flags
vfs: stop using user_path_at_empty in do_readlinkat
tmpfs: don't interrupt fallocate with EINTR
fs: don't block i_writecount during exec
...
|
|
Merge a miscellaneous ACPI change for 6.11-rc1:
- Add missing MODULE_DESCRIPTION() macros in two places (Jeff Johnson).
* acpi-misc:
ACPI: add missing MODULE_DESCRIPTION() macros
|
|
Merge changes in the ACPI processor and ACPI PAD drivers, ACPI
resources management quirks and ACPI backlight (video) driver
changes for 6.11-rc1:
- Downgrade Intel _OSC and _PDC messages in the ACPI processor driver
to debug to reduce log noise (Mario Limonciello).
- Still evaluate _OST when _PUR evaluation fails in the ACPI PAD
(processor aggregator) driver as per the spec (Armin Wolf).
- Skip ACPI IRQ override on Asus Vivobook Pro N6506MJ and N6506MU
platforms (Tamim Khan).
- Force native mode on some T2 macbooks in the ACPI backlight driver
and replace strcpy() with strscpy() in it (Orlando Chamberlain,
Muhammad Qasim Abdul Majeed).
* acpi-processor:
ACPI: processor: Downgrade Intel _OSC and _PDC messages to debug
* acpi-pad:
ACPI: acpi_pad: Still evaluate _OST when _PUR evaluation fails
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MJ
ACPI: resource: Skip IRQ override on Asus Vivobook Pro N6506MU
* acpi-video:
ACPI: video: force native for some T2 macbooks
ACPI: video: Use strscpy() instead of strcpy()
|
|
Merge ACPI PMIC driver changes, updates related to the ACPI battery and
SBS drivers and NUMA-related ACPI updates for 6.11-rc1:
- Clean up the ACPI PMIC driver in multiple ways (Andy
Shevchenko, Christophe JAILLET).
- Add support for charge limiting state to the ACPI battery driver
and update _OSC to indicate support for it (Armin Wolf).
- Clean up the sysfs interface in the ACPI battery, SBS (smart battery
subsystem) and AC drivers (Thomas Weißschuh).
- Coordinate header includes in the ACPI NUMA code and make it use
ACCESS_COORDINATE_CPU when appropriate (Huang Ying, Thorsten Blum).
* acpi-pmic:
ACPI: PMIC: Constify struct pmic_table
ACPI: PMIC: Replace open coded be16_to_cpu()
ACPI: PMIC: Convert pr_*() to dev_*() printing macros
ACPI: PMIC: Use sizeof() instead of hard coded value
* acpi-battery:
ACPI: bus: Indicate support for battery charge limiting thru _OSC
ACPI: battery: Add support for charge limiting state
ACPI: SBS: manage alarm sysfs attribute through psy core
ACPI: battery: create alarm sysfs attribute atomically
ACPI: battery: use sysfs_emit over sprintf
ACPI: battery: constify powersupply properties
ACPI: SBS: constify powersupply properties
ACPI: AC: constify powersupply properties
* acpi-numa:
ACPI: NUMA: Consolidate header includes
ACPI: HMAT: Use ACCESS_COORDINATE_CPU when appropriate
|
|
Pull drm fixes from Dave Airlie:
"Oh I screwed up last week's fixes pull, and forgot to send..
Back to work, thanks to Sima for last week, not too many fixes as
expected getting close to release [ sic - Linus ], amdgpu and xe have
a couple each, and then some other misc ones.
amdgpu:
- PSR-SU fix
- Reseved VMID fix
xe:
- Use write-back caching mode for system memory on DGFX
- Do not leak object when finalizing hdcp gsc
bridge:
- adv7511 EDID irq fix
gma500:
- NULL mode fixes.
meson:
- fix resource leak"
* tag 'drm-fixes-2024-07-12' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Reset freesync config before update new state"
drm/xe/display/xe_hdcp_gsc: Free arbiter on driver removal
drm/xe: Use write-back caching mode for system memory on DGFX
drm/amdgpu: reject gang submit on reserved VMIDs
drm/gma500: fix null pointer dereference in cdv_intel_lvds_get_modes
drm/gma500: fix null pointer dereference in psb_intel_lvds_get_modes
drm/meson: fix canvas release in bind function
drm/bridge: adv7511: Fix Intermittent EDID failures
|
|
Merge changes in the ACPI x86-specific code, ACPI fan driverm ACPI LPSS
(Intel SoC) driver and the ACPI CPPC library for 6.11-rc1:
- Switch the ACPI x86 utility code and the ACPI LPSS driver to new
Intel CPU model defines (Tony Luck).
- Add hwmon interface support to the ACPI fan driver (Armin Wolf).
- Add sysfs entry for guaranteed performance to the ACPI CPPC library
and replace a ternary operator with umax() in it (Petr Tesařík,
Prabhakar Pujeri).
* acpi-x86:
ACPI: x86: Switch to new Intel CPU model defines
* acpi-fan:
ACPI: fan: Add hwmon support
* acpi-soc:
ACPI: LPSS: Switch to new Intel CPU model defines
* acpi-cppc:
ACPI: CPPC: Replace ternary operator with umax()
ACPI: CPPC: add sysfs entry for guaranteed performance
|
|
Merge OPP (operating performance points) and tooling updates for
6.11-rc1:
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar).
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson).
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt).
- Address several assorted issues in the cpupower utility (Roman
Storozhenko).
* pm-opp:
OPP: Introduce an OF helper function to inform if required-opps is used
OPP: Drop a redundant in-parameter to _set_opp_level()
OPP: Fix missing cleanup on error in _opp_attach_genpd()
* pm-tools:
cpupower: fix lib default installation path
cpupower: Disable direct build of the 'bench' subproject
cpupower: Change the var type of the 'monitor' subcommand display mode
cpupower: Remove absent 'v' parameter from monitor man page
cpupower: Improve cpupower build process description
cpupower: Add 'help' target to the main Makefile
cpupower: Replace a dead reference link with working ones
pm-graph: v5.12, code revamp for python3.12
pm-graph: v5.12, fixes
|
|
Merge cpuidle and power capping changes for 6.11-rc1:
- Improve the teo cpuidle governor and clean up leftover comments from
the menu cpuidle governor (Christian Loehle).
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant).
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson).
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck).
- Switch the Intel RAPL driver new Intel CPU model defines (Tony Luck).
- Simplify if condition in the idle_inject driver (Thorsten Blum).
* pm-cpuidle:
cpuidle: teo: Don't count non-existent intercepts
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpuidle: governors: teo: Fix a typo in a comment
cpuidle: haltpoll: add missing MODULE_DESCRIPTION() macro
cpuidle: menu: Cleanup after loadavg removal
intel_idle: Switch to new Intel CPU model defines
* pm-powercap:
powercap: idle_inject: Simplify if condition
powercap: intel_rapl: Switch to new Intel CPU model defines
powercap: intel_rapl_msr: Switch to new Intel CPU model defines
|
|
Merge cpufreq changes for 6.11-rc1:
- Add Loongson-3 CPUFreq driver support (Huacai Chen).
- Add support for the Arrow Lake and Lunar Lake platforms and
the out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada).
- Switch cpufreq to new Intel CPU model defines (Tony Luck).
- Simplify the cpufreq driver interface by switching the .exit() driver
callback to the void return data type (Lizhe, Viresh Kumar).
- Make cpufreq_boost_enabled() return bool (Dhruva Gole).
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du).
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin).
- Fix memory leaks and of_node_put() usage in the sun50i and qcom-nvmem
cpufreq drivers (Javier Carrasco).
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou).
- Fix deferred probe handling in the TI cpufreq driver and wrong return
values of ti_opp_supply_probe(), and add OPP tables for the AM62Ax and
AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser).
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona).
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado).
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li).
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu).
* pm-cpufreq: (55 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpufreq: docs: Add missing scaling_available_frequencies description
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
cpufreq: sti: add missing MODULE_DEVICE_TABLE entry for stih418
cpufreq: intel_pstate: Replace boot_cpu_has()
cpufreq: ti: update OPP table for AM62Px SoCs
...
|
|
This is the last - for now - of the "look, we generated some
questionable code for basic pathname lookup operations" set of
branches.
This is mainly just re-organizing the name hashing code in
link_path_walk(), mostly by improving the calling conventions to
the inlined helper functions and moving some of the code around
to allow for more straightforward code generation.
The profiles - and the generated code - look much more palatable
to me now.
* link_path_walk:
vfs: link_path_walk: move more of the name hashing into hash_name()
vfs: link_path_walk: improve may_lookup() code generation
vfs: link_path_walk: do '.' and '..' detection while hashing
vfs: link_path_walk: clarify and improve name hashing interface
vfs: link_path_walk: simplify name hash flow
|
|
|
|
Asbjørn Sloth Tønnesen says:
====================
flower: rework TCA_FLOWER_KEY_ENC_FLAGS usage
This series reworks the recently added TCA_FLOWER_KEY_ENC_FLAGS
attribute, to be more like TCA_FLOWER_KEY_FLAGS, and use the unused
u32 flags field in FLOW_DISSECTOR_KEY_ENC_CONTROL, instead of adding
a new flags field as FLOW_DISSECTOR_KEY_ENC_FLAGS.
I have defined the new FLOW_DIS_F_* and TCA_FLOWER_KEY_FLAGS_*
flags to co-exist with the existing flags, so the meaning
of the flags field in struct flow_dissector_key_control is not
depending on the context it is used in. If we run out of bits
then we can always split them up later, if we really want to.
Future flags might also be valid in both contexts.
iproute2 RFC v2 patch:
https://lore.kernel.org/560bcd549ca8ab24b1ad5abe352580a621f6d426.1720790774.git.dcaratti@redhat.com/
v3: https://lore.kernel.org/[email protected]/
v2: https://lore.kernel.org/[email protected]/
v1: https://lore.kernel.org/[email protected]/
RFC: https://lore.kernel.org/[email protected]/
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
NL_REQ_ATTR_CHECK() is used in fl_set_key_flags() to set
extended attributes about the origin of an error, this
patch propagates tca[TCA_OPTIONS] through.
Before this patch:
$ sudo ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/tc.yaml \
--do newtfilter --json '{
"chain": 0, "family": 0, "handle": 4, "ifindex": 22,
"info": 262152,
"kind": "flower",
"options": {
"flags": 0, "key-enc-flags": 8,
"key-eth-type": 2048 },
"parent": 4294967283 }'
Netlink error: Invalid argument
nl_len = 68 (52) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Missing flags mask',
'miss-type': 111}
After this patch:
[same cmd]
Netlink error: Invalid argument
nl_len = 76 (60) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Missing flags mask',
'miss-type': 111, 'miss-nest': 56}
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Make sure to set encapsulated control flags also for non-IP
packets, such that it's possible to allow matching on e.g.
TUNNEL_OAM on a geneve packet carrying a non-IP packet.
Suggested-by: Davide Caratti <[email protected]>
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Now that TCA_FLOWER_KEY_ENC_FLAGS is unused, as it's
former data is stored behind TCA_FLOWER_KEY_ENC_CONTROL,
then remove the last bits of FLOW_DISSECTOR_KEY_ENC_FLAGS.
FLOW_DISSECTOR_KEY_ENC_FLAGS is unreleased, and have been
in net-next since 2024-06-04.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe key-enc-flags and key-enc-flags-mask.
These are defined similarly to key-flags and key-flags-mask.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch changes how TCA_FLOWER_KEY_ENC_FLAGS is used, so that
it is used with TCA_FLOWER_KEY_FLAGS_* flags, in the same way as
TCA_FLOWER_KEY_FLAGS is currently used.
Where TCA_FLOWER_KEY_FLAGS uses {key,mask}->control.flags, then
TCA_FLOWER_KEY_ENC_FLAGS now uses {key,mask}->enc_control.flags,
therefore {key,mask}->enc_flags is now unused.
As the generic fl_set_key_flags/fl_dump_key_flags() is used with
encap set to true, then fl_{set,dump}_key_enc_flags() is removed.
This breaks unreleased userspace API (net-next since 2024-06-04).
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Prepare to set and dump the tunnel flags.
This code won't see any of these flags yet, as these flags
aren't allowed by the NLA_POLICY_MASK, and the functions
doesn't get called with encap set to true yet.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Set the new FLOW_DIS_F_TUNNEL_* encapsulated control flags, based
on if their counter-part is set in tun_flags.
These flags are not userspace visible yet, as the code to dump
encapsulated control flags will first be added, and later activated
in the following patches.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Rename skb_flow_dissect_set_enc_addr_type() to
skb_flow_dissect_set_enc_control(), and make it set both
addr_type and flags in FLOW_DISSECTOR_KEY_ENC_CONTROL.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This policy guards fl_set_key_flags() from seeing flags
not used in the context of TCA_FLOWER_KEY_FLAGS.
In order For the policy check to be performed with the
correct endianness, then we also needs to change the
attribute type to NLA_BE32 (Thanks Davide).
TCA_FLOWER_KEY_FLAGS{,_MASK} already has a be32 comment
in include/uapi/linux/pkt_cls.h.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Prepare fl_set_key_flags/fl_dump_key_flags() for use with
TCA_FLOWER_KEY_ENC_FLAGS{,_MASK}.
This patch adds an encap argument, similar to fl_set_key_ip/
fl_dump_key_ip(), and determine the flower keys based on the
encap argument, and use them in the rest of the two functions.
Since these functions are so far, only called with encap set false,
then there is no functional change.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Tested-by: Davide Caratti <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Define new TCA_FLOWER_KEY_FLAGS_* flags for use in struct
flow_dissector_key_control, covering the same flags as
currently exposed through TCA_FLOWER_KEY_ENC_FLAGS.
Put the new flags under FLOW_DIS_F_*. The idea is that we can
later, move the existing flags under FLOW_DIS_F_* as well.
The ynl flag names have been taken from the RFC iproute2 patch.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe the flower control flags, and use them
for key-flags and key-flags-mask.
The flag names have been taken from iproute2.
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Donald Hunter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Redefine the flower control flags as an enum, so they are
included in BTF info.
Make the kernel-side enum a more explicit superset of
TCA_FLOWER_KEY_FLAGS_*, new flags still need to be added to
both enums, but at least the bit position only has to be
defined once.
FLOW_DIS_ENCAPSULATION is never set for mask, so it can't be
exposed to userspace in an unsupported flags mask error message,
so it will be placed one bit position above the last uAPI flag.
Suggested-by: Alexander Lobakin <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Davide Caratti <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge arm64 support for proper 'unsafe' user accessor functionality,
with 'asm goto' for handling exceptions.
The arm64 user access code used the slow fallback code for the user
access code, which generates horrendous code for things like
strncpy_from_user(), because it causes us to generate code for SW PAN
and for range checking for every individual word.
Teach arm64 about 'user_access_begin()' and the so-called 'unsafe' user
access functions that take an error label and use 'asm goto' to make all
the exception handling be entirely out of line.
[ These user access functions are called 'unsafe' not because the
concept is unsafe, but because the low-level accessor functions
absolutely have to be protected by the 'user_access_begin()' code,
because that's what does the range checking.
So the accessor functions have that scary name to make sure people
don't think they are usable on their own, and cannot be mis-used the
way our old "double underscore" versions of __get_user() and friends
were ]
The "(early part)" of the branch is because the full branch also
improved on the "access_ok()" function, but the exact semantics of TBI
(top byte ignore) have to be discussed before doing that part. So this
just does the low-level accessor update to use "asm goto".
* 'arm64-uaccess' (early part):
arm64: start using 'asm goto' for put_user()
arm64: start using 'asm goto' for get_user() when available
|
|
This reverts commit f7023b3d697c6a7dfe2d9c70e0d8c2c580ccbd76.
Russell indicates that assuming 32bits are sufficient isn't
necessarily safe.
Link: https://lore.kernel.org/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge minor word-at-a-time instruction choice improvements for x86 and
arm64.
This is the second of four branches that came out of me looking at the
code generation for path lookup on arm64.
The word-at-a-time infrastructure is used to do string operations in
chunks of one word both when copying the pathname from user space (in
strncpy_from_user()), and when parsing and hashing the individual path
components (in link_path_walk()).
In particular, the "find the first zero byte" uses various bit tricks to
figure out the end of the string or path component, and get the length
without having to do things one byte at a time. Both x86-64 and arm64
had less than optimal code choices for that.
The commit message for the arm64 change in particular tries to explain
the exact code flow for the zero byte finding for people who care. It's
made a bit more complicated by the fact that we support big-endian
hardware too, and so we have some extra abstraction layers to allow
different models for finding the zero byte, quite apart from the issue
of picking specialized instructions.
* word-at-a-time:
arm64: word-at-a-time: improve byte count calculations for LE
x86-64: word-at-a-time: improve byte count calculations
|
|
'struct llc_sap_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
339 456 24 819 333 net/llc/llc_s_st.o
After:
=====
text data bss dec hex filename
683 144 0 827 33b net/llc/llc_s_st.o
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/9d17587639195ee94b74ff06a11ef97d1833ee52.1720973710.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
'struct llc_conn_state_trans' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
13923 10896 32 24851 6113 net/llc/llc_c_st.o
After:
=====
text data bss dec hex filename
21859 3328 0 25187 6263 net/llc/llc_c_st.o
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/87cda89e4c9414e71d1a54bb1eb491b0e7f70375.1720973029.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Name it 'addr' instead of 'port' or 'phy'.
Signed-off-by: Christian Eggers <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Merge runtime constants infrastructure with implementations for x86 and
arm64.
This is one of four branches that came out of me looking at profiles of
my kernel build filesystem load on my 128-core Altra arm64 system, where
pathname walking and the user copies (particularly strncpy_from_user()
for fetching the pathname from user space) is very hot.
This is a very specialized "instruction alternatives" model where the
dentry hash pointer and hash count will be constants for the lifetime of
the kernel, but the allocation are not static but done early during the
kernel boot. In order to avoid the pointer load and dynamic shift, we
just rewrite the constants in the instructions in place.
We can't use the "generic" alternative instructions infrastructure,
because different architectures do it very differently, and it's
actually simpler to just have very specific helpers, with a fallback to
the generic ("old") model of just using variables for architectures that
do not implement the runtime constant patching infrastructure.
Link: https://lore.kernel.org/all/CAHk-=widPe38fUNjUOmX11ByDckaeEo9tN4Eiyke9u1SAtu9sA@mail.gmail.com/
* runtime-constants:
arm64: add 'runtime constant' support
runtime constants: add x86 architecture support
runtime constants: add default dummy infrastructure
vfs: dcache: move hashlen_hash() from callers into d_hash()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
First part of "net: Make timestamping selectable" from Kory Maincent.
Change the driver-facing type already to lower rebasing pain.
Link: https://lore.kernel.org/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <[email protected]>
Acked-by: Alexandra Winter <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Prepare for future support of saving hwtstamp source in PTP xarray by
introducing HWTSTAMP_SOURCE_UNSPEC to hwtstamp_source enum, setting it
to 0 to match old behavior of no source defined.
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility
default_timestamp flag has been introduced in phy_device that is set by
the phy driver to know we are using the old API behavior.
Reviewed-by: Rahul Rameshbabu <[email protected]>
Signed-off-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge thermal drivers updates for 6.11-rc1 from Daniel Lezcano:
"- Group all Renesas drivers inside a dedicated sub directory and add
the missing dependency to OF (Niklas Söderlund)
- Add suspend/resume support on k3_j72xx_bandgap and take the
opportunity to remove a unneeded delay in the init time code path
(Théo Lebrun)
- Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)
- Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)
- Add the DT bindings for the X1E80100 temperature sensor (Abel Vesa)
- Fix the thermal zone node name regular expression in the DT schema
(Krzysztof Kozlowski)
- Take into account some production platforms may not have calibration
data. Deal with it with a default value instead of failing the
initialization (Chen-Yu Tsai)
- Fix the sensor cell size on the Exynos platform (Krzysztof Kozlowski)
- Bring the common definition of '#thermal-sensor-cells' property in
order to simplify the bindings on all the platforms where this
change makes sense and do some minor cleanups (Krzysztof Kozlowski)
- Fix a race between removal and clock disable on the broadcom driver
(Krzysztof Kozlowski)
- Drop 'trips' node as required from the thermal zone bindings in
order to fix the remaining warnings appearing with thermal zone
whithout trip points defined (Rob Herring)
- Simplify all the drivers where dev_err_probe() can apply (Krzysztof
Kozlowski)
- Cleanup code related to stih416 as this platform is not described
anywhere (Raphael Gallais-Pou)"
* tag 'thermal-v6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (45 commits)
thermal/drivers/sti: Cleanup code related to stih416
thermal/drivers/generic-adc: Simplify with dev_err_probe()
thermal/drivers/generic-adc: Simplify probe() with local dev variable
thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify with dev_err_probe()
thermal/drivers/imx: Simplify probe() with local dev variable
thermal/drivers/hisi: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify with dev_err_probe()
thermal/drivers/exynos: Simplify probe() with local dev variable
thermal/drivers/broadcom: Simplify with dev_err_probe()
thermal/drivers/broadcom: Simplify probe() with local dev variable
thermal/drivers/broadcom: Fix race between removal and clock disable
dt-bindings: thermal: Drop 'trips' node as required
dt-bindings: thermal: qoriq: reference thermal-sensor schema
dt-bindings: thermal: cleanup examples indentation
dt-bindings: thermal: simplify few bindings
dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
dt-bindings: thermal: ti,am654: reference thermal-sensor schema
dt-bindings: thermal: st,stm32: reference thermal-sensor schema
...
|
|
Initialize the completion before the mailbox channel is requested.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
wait_for_completion_timeout()
The wait_for_completion_timeout() function returns 0 if timed out, and a
positive value if completed. Fix the usage of this function.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Fixes: 2eab59cf0d20 ("firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng")
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Do not complete the "command done" completion if there are no waiters.
This can happen if a wait_for_completion() timed out or was interrupted.
Fixes: 389711b37493 ("firmware: Add Turris Mox rWTM firmware driver")
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Several recent patches added static stubs to btmtk.h without the inline
keyword, which causes instances of -Wunused-function when those stubs
are not used anywhere in a file that includes the header:
In file included from drivers/bluetooth/btusb.c:28:
drivers/bluetooth/btmtk.h:254:13: warning: 'btmtk_fw_get_filename' defined but not used [-Wunused-function]
254 | static void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id,
| ^~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:249:12: warning: 'btmtk_process_coredump' defined but not used [-Wunused-function]
249 | static int btmtk_process_coredump(struct hci_dev *hdev, struct sk_buff *skb)
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:243:12: warning: 'btmtk_register_coredump' defined but not used [-Wunused-function]
243 | static int btmtk_register_coredump(struct hci_dev *hdev, const char *name,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:233:12: warning: 'btmtk_setup_firmware' defined but not used [-Wunused-function]
233 | static int btmtk_setup_firmware(struct hci_dev *hdev, const char *fwname,
| ^~~~~~~~~~~~~~~~~~~~
drivers/bluetooth/btmtk.h:227:12: warning: 'btmtk_setup_firmware_79xx' defined but not used [-Wunused-function]
227 | static int btmtk_setup_firmware_79xx(struct hci_dev *hdev, const char *fwname,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Add inline to all the stubs in btmtk.h (even ones that do not currently
have any warnings associated with them) to ensure there are never unused
function warnings from these stubs, as is customary for the kernel.
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
This fixes the following build error introduced by b80f4e3b8cb8
("Bluetooth: hci_qca: schedule a devm action for disabling the clock"):
drivers/bluetooth/hci_qca.c: In function ‘qca_serdev_remove’:
drivers/bluetooth/hci_qca.c:2501:2: error: label at end of compound statement
2501 | default:
| ^~~~~~~
Fixes: b80f4e3b8cb8 ("Bluetooth: hci_qca: schedule a devm action for disabling the clock")
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
In preparation for using the power sequencing subsystem on sm8650 boards
and X13s laptop let's make pwrseq the default for wcn7850 and wcn6855.
Both these models require an enable GPIO so we can safely assume that if
the property is not there, then we should try to get the power
sequencer. Due to how the pwrseq lookup works - checking the provider at
run-time - we cannot really do it the other way around as we'd get stuck
forever on -EPROBE_DEFER.
If the relevant OF node does have the 'enable-gpios' property, we
fallback to the existing code for backward compatibility with older DTs.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
If the device has a power sequencing handle, use it first. Otherwise
fall back to whatever code already exists.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|