aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-06-25qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependencyArnd Bergmann1-1/+2
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Andy Gross <[email protected]>
2018-06-25Merge tag 'qcom-fixes-for-4.18-rc1' into linusAndy Gross2-3/+3
Qualcomm Fixes for v4.18-rc1 * Fix coresight graph on msm8916 * Disable uart0 on db820c by default
2018-06-26usb: chipidea: host: fix disconnection detect issuePeter Chen1-1/+4
The commit 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") delete the assignment for hcd->usb_phy, it causes usb_phy_notify_connect{disconnect) are not called, the USB PHY driver is not notified of hot plug event, then the disconnection will not be detected by hardware. Fixes: 4e88d4c08301 ("usb: add a flag to skip PHY initialization to struct usb_hcd") Acked-by: Martin Blumenstingl <[email protected]> Reported-by: Mats Karrman <[email protected]> Tested-by: Mats Karrman <[email protected]> Signed-off-by: Peter Chen <[email protected]>
2018-06-26Merge tag 'iio-fixes-4.18a' of ↵Greg Kroah-Hartman5-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 4.18 cycle. * bmp280 - Fix wrong relative humidity unit. * buffer - Fix a function signature to match the function. * inv_mpu6050 - Fix a regression in which older ACPI devices won't have working interrupts due to lack of information on the interrupt type. * mma8452 - Don't ignore data ready interrupt when handling interrupts as will look like an unhandled interrupt. * tsl2x7x/tsl2772 - Avoid a potential division by zero.
2018-06-25X.509: unpack RSA signatureValue field from BIT STRINGMaciej S. Szmigiero1-0/+9
The signatureValue field of a X.509 certificate is encoded as a BIT STRING. For RSA signatures this BIT STRING is of so-called primitive subtype, which contains a u8 prefix indicating a count of unused bits in the encoding. We have to strip this prefix from signature data, just as we already do for key data in x509_extract_key_data() function. This wasn't noticed earlier because this prefix byte is zero for RSA key sizes divisible by 8. Since BIT STRING is a big-endian encoding adding zero prefixes has no bearing on its value. The signature length, however was incorrect, which is a problem for RSA implementations that need it to be exactly correct (like AMD CCP). Signed-off-by: Maciej S. Szmigiero <[email protected]> Fixes: c26fd69fa009 ("X.509: Add a crypto key parser for binary (DER) X.509 certificates") Cc: [email protected] Signed-off-by: James Morris <[email protected]>
2018-06-25perf tools: Fix crash caused by accessing feat_ops[HEADER_LAST_FEATURE]Ravi Bangoria4-4/+23
perf_event__process_feature() accesses feat_ops[HEADER_LAST_FEATURE] which is not defined and thus perf is crashing. HEADER_LAST_FEATURE is used as an end marker for the perf report but it's unused for perf script/annotate. Ignore HEADER_LAST_FEATURE for perf script/annotate, just like it is done in 'perf report'. Before: # perf record -o - ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) # After: # perf record -o - ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) ls 7031 4392.099856: 250000 cpu-clock:uhH: 7f5e0ce7cd60 ls 7031 4392.100355: 250000 cpu-clock:uhH: 7f5e0c706ef7 # Signed-off-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: 57b5de463925 ("perf report: Support forced leader feature in pipe mode") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf script: Fix crash because of missing evsel->privRavi Bangoria1-0/+14
'perf script' in piped mode is crashing because evsel->priv is not set properly. Fix it. Before: # perf record -o - -- ls | perf script <SNIP 'ls' output> Segmentation fault (core dumped) # After: # perf record -o - -- ls | perf script <SNIP 'ls' output> ls 2282 1031.731974: 250000 cpu-clock:uhH: 7effe4b3d29e ls 2282 1031.732222: 250000 cpu-clock:uhH: 7effe4b3a650 # Signed-off-by: Ravi Bangoria <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Fixes: a14390fde64e ("perf script: Allow creating per-event dump files") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf script: Add missing output fields in a hintRavi Bangoria1-2/+3
A few fields are missing in a perf script -F hint. Add them. Signed-off-by: Ravi Bangoria <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: David Carrillo-Cisneros <[email protected]> Cc: Jin Yao <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf bench: Fix numa report output codeJiri Olsa1-2/+3
Currently we can hit following assert when running numa bench: $ perf bench numa mem -p 3 -t 1 -P 512 -s 100 -zZ0cm --thp 1 perf: bench/numa.c:1577: __bench_numa: Assertion `!(!(((wait_stat) & 0x7f) == 0))' failed. The assertion is correct, because we hit the SIGFPE in following line: Thread 2.2 "thread 0/0" received signal SIGFPE, Arithmetic exception. [Switching to Thread 0x7fffd28c6700 (LWP 11750)] 0x000.. in worker_thread (__tdata=0x7.. ) at bench/numa.c:1257 1257 td->speed_gbs = bytes_done / (td->runtime_ns / NSEC_PER_SEC) / 1e9; We don't check if the runtime is actually bigger than 1 second, and thus this might end up with zero division within FPU. Adding the check to prevent this. Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf stat: Remove duplicate event countingThomas Richter1-1/+70
'perf stat' shows a mismatch in perf stat regarding counter names on s390: Run command: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 573146 573146 tx_nc_tend: 1 573146 573146 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.001037252 seconds time elapsed [root@s35lp76 perf]# shows transaction counter tx_nc_tend with value 3 but it was triggered only once as seen by the output of mytesttx. When looking up the event name tx_nc_tend the following function sequence is called: parse_events_multi_pmu_add() +--> perf_pmu__scan() being called with NULL argument +--> pmu_read_sysfs() scans directory ../devices/ for all PMUs +--> perf_pmu__find() tries to find a PMU in the global pmu list. +--> pmu_lookup() called to read all file entries when not in global list. pmu_lookup() causes the issue. It calls +---> pmu_aliases() to read all the entries in the PMU directory. On s390 this is named /sys/devices/cpum_cf/events. +--> pmu_aliases_parse() reads all files and creates an alias for each file name. So we end up with first entry created by reading the sysfs file [root@s35lp76 perf]# cat /sys/devices/cpum_cf /events/TX_NC_TEND event=0x008d [root@s35lp76 perf]# Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ After all files in this directory have been read and aliases created this function is called: +--> pmu_add_cpu_aliases() This function looks up the CPU tables created by the json files. With json files for s390 now available all the aliases are added to the PMU alias list a second time. The second entry is added by reading the json file converted by jevent resulting in file pmu-events/pmu-events.c: { .name = "tx_nc_tend", .event = "event=0x8d", .desc = "Unit: cpum_cf Completed TEND \ instructions \ in non-constrained TX mode", .topic = "extended", .long_desc = "A TEND instruction has \ completed in a \ non-constrained \ transactional-execution mode", .pmu = "cpum_cf", }, Debug output shows this entry tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Function pmu_aliases_parse() and pmu_add_cpu_aliases() both use __perf_pmu__new_alias() to add an alias to the PMU alias list. There is no check if an alias already exist So we end up with 2 entries for tx_nc_tend in the PMU alias list. Having set up the PMU alias list for this PMU now parse_events_multi_add_pmu() reads the complete alias list and adds each alias with parse_events_add_pmu() to the global perfev_list. This causes the alias to be added multiple times to the event list. Fix this by making __perf_pmu__new_alias() to merge alias definitions if an alias is already on the alias list. Also print a debug message when the alias has mismatches in some fields. Output before: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 3 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf stat -e tx_nc_tend -v \ -- ~/mytesttx 1 >/tmp/111 tx_nc_tend: 1 551446 551446 Performance counter stats for '/root/mytesttx 1': 1 tx_nc_tend 0.000961134 seconds time elapsed [root@s35lp76 perf]# Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Reviewed-by: Jiri Olsa <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf alias: Rebuild alias expression string to make it comparableThomas Richter1-1/+24
PMU alias definitions in sysfs files may have spaces, newlines and numbers with leading zeroes. Some alias definitions may also appear in JSON files without spaces, etc. Scan alias definitions and remove leading zeroes, spaces, newlines, etc and rebuild string to make alias->str member comparable. s390 for example has terms specified as event=0x0091 (read from files ../<PMU>/events/<FILE> and terms specified as event=0x91 (read from JSON files). Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf alias: Remove trailing newline when reading sysfs filesThomas Richter1-0/+3
Remove a trailing newline when reading sysfs file contents such as /sys/devices/cpum_cf/events/TX_NC_TEND. This shows when verbose option -v is used. Output before: tx_nc_tend -> 'cpum_cf'/'event=0x008d '/ Output after: tx_nc_tend -> 'cpum_cf'/'event=0x8d'/ Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf tools: Fix a clang 7.0 compilation errorYonghong Song1-2/+9
Arnaldo reported the perf build failure with latest llvm/clang compiler (7.0). $ make LIBCLANGLLVM=1 -C tools/perf/ <SNIP> CC /tmp/tmp.t53Qo38zci/tests/kmod-path.o util/c++/clang.cpp: In function ‘std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)’: util/c++/clang.cpp:150:43: error: no matching function for call to ‘llvm::TargetMachine::addPassesToEmitFile(llvm::legacy::PassManager&, llvm::raw_svector_ostream&, llvm::TargetMachine::CodeGenFileType)’ TargetMachine::CGFT_ObjectFile)) { ^ In file included from util/c++/clang.cpp:25:0: /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate: virtual bool llvm::TargetMachine::addPassesToEmitFile( llvm::legacy::PassManagerBase&, llvm::raw_pwrite_stream&, llvm::raw_pwrite_stream*, llvm::TargetMachine::CodeGenFileType, bool, llvm::MachineModuleInfo*) virtual bool addPassesToEmitFile(PassManagerBase &, raw_pwrite_stream &, ^~~~~~~~~~~~~~~~~~~ /usr/local/include/llvm/Target/TargetMachine.h:254:16: note: candidate expects 6 arguments, 3 provided mv: cannot stat '/tmp/tmp.t53Qo38zci/util/c++/.clang.o.tmp': No such file or directory make[7]: *** [/home/acme/git/perf/tools/build/Makefile.build:101: /tmp/tmp.t53Qo38zci/util/c++/clang.o] Error 1 make[6]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: c++] Error 2 make[5]: *** [/home/acme/git/perf/tools/build/Makefile.build:139: util] Error 2 make[5]: *** Waiting for unfinished jobs.... CC /tmp/tmp.t53Qo38zci/tests/thread-map.o The function addPassesToEmitFile signature changed in llvm 7.0 and such a change caused the failure. This patch fixed the issue with using proper function signatures under different compiler versions. Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25tools include uapi: Synchronize bpf.h with the kernelArnaldo Carvalho de Melo1-1/+1
To pick the rename in: bd3a08aaa9a3 ("bpf: flowlabel in bpf_fib_lookup should be flowinfo") Silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h' Cc: Adrian Hunter <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25tools include uapi: Update if_link.h to pick ↵Arnaldo Carvalho de Melo1-0/+2
IFLA_{BRPORT_ISOLATED,VXLAN_TTL_INHERIT} The IFLA_BRPORT_ISOLATED and IFLA_VXLAN_TTL_INHERIT defines were added in: 7d850abd5f4e ("net: bridge: add support for port isolation") 72f6d71e491e ("vxlan: add ttl inherit support") Pick them, silencing this build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/if_link.h' differs from latest version at 'include/uapi/linux/if_link.h' Cc: Alexei Starovoitov <[email protected]> Cc: David S. Miller <[email protected]> Cc: Eric Leblond <[email protected]> Cc: Hangbin Liu <[email protected]> Cc: Nikolay Aleksandrov <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25tools include powerpc: Update arch/powerpc/include/uapi/asm/unistd.h copy to ↵Arnaldo Carvalho de Melo1-0/+1
get 'rseq' syscall This updates the tools/perf/ copy of the powerpc file used to generate the syscall table file used to make 'perf trace' become aware of the new 'rseq' syscall, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. From this commit: bb862b021d75 ("powerpc: Wire up restartable sequences system call") Silencing this tools/perf build warning: Warning: Kernel ABI header at 'tools/arch/powerpc/include/uapi/asm/unistd.h' differs from latest version at 'arch/powerpc/include/uapi/asm/unistd.h' Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Boqun Feng <[email protected]> Cc: David Ahern <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf tools: Update x86's syscall_64.tbl, adding 'io_pgetevents' and 'rseq'Arnaldo Carvalho de Melo1-0/+2
This updates the tools/perf/ copy of the system call table for x86 which makes 'perf trace' become aware of the new 'io_pgetevents' and 'rseq' syscalls, no matter in which system it gets built, i.e. older systems where the syscalls are not available in the running kernel (via tracefs) or in the system headers will still be aware of these syscalls/. These are the csets introducing the source drift: 05c17cedf85b ("x86: Wire up restartable sequence system call") 7a074e96dee6 ("aio: implement io_pgetevents") This results in this build time change: $ diff -u /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c --- /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c.old 2018-06-15 11:48:17.648948094 -0300 +++ /tmp/build/perf/arch/x86/include/generated/asm/syscalls_64.c 2018-06-15 11:48:22.133942480 -0300 @@ -332,5 +332,7 @@ [330] = "pkey_alloc", [331] = "pkey_free", [332] = "statx", + [333] = "io_pgetevents", + [334] = "rseq", }; -#define SYSCALLTBL_x86_64_MAX_ID 332 +#define SYSCALLTBL_x86_64_MAX_ID 334 $ This silences the following tools/perf/ build warning: Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' Cc: Adrian Hunter <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25tools headers uapi: Synchronize drm/drm.hArnaldo Carvalho de Melo1-0/+7
To pick up the new ioctls added in these csets: 7595bda2fb43 ("drm: Add DRM client cap for aspect-ratio") The DRM caps are not yet being decoded in 'perf trace', so this sync doesn't incur in any change in behaviour in any tools, just silencing this tools/perf/ build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h' Cc: Adrian Hunter <[email protected]> Cc: Ankit Nautiyal <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf intel-pt: Fix packet decoding of CYC packetsAdrian Hunter1-1/+1
Use a 64-bit type so that the cycle count is not limited to 32-bits. Signed-off-by: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf tests: Add valid callback for parse-events testJiri Olsa1-2/+15
Adding optional 'valid' callback for events tests in parse-events object, so we don't try to parse PMUs, which are not supported. Following line is displayed for skipped test: running test 52 'intel_pt//u'... SKIP Committer note: Use named initializers in the struct evlist_test variable to avoid breaking the build on centos:5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_pmu_events': tests/parse-events.c:1817: error: missing initializer tests/parse-events.c:1817: error: (near initialization for 'e.type') Signed-off-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Kim Phillips <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf tests: Add event parsing error handling to parse events testJiri Olsa1-3/+5
Add missing error handling for parse_events calls in test_event function that led to following segfault on s390: running test 52 'intel_pt//u' perf: Segmentation fault ... /lib64/libc.so.6(vasprintf+0xe6) [0x3fffca3f106] /lib64/libc.so.6(asprintf+0x46) [0x3fffca1aa96] ./perf(parse_events_add_pmu+0xb8) [0x80132088] ./perf(parse_events_parse+0xc62) [0x8019529a] ./perf(parse_events+0x98) [0x801341c0] ./perf(test__parse_events+0x48) [0x800cd140] ./perf(cmd_test+0x26a) [0x800bd44a] test child interrupted Adding the struct parse_events_error argument to parse_events call. Also adding parse_events_print_error to get more details on the parsing failures, like: # perf test 6 -v running test 52 'intel_pt//u'failed to parse event 'intel_pt//u', err 1, str 'Cannot find PMU `intel_pt'. Missing kernel support?' event syntax error: 'intel_pt//u' \___ Cannot find PMU `intel_pt'. Missing kernel support? Committer note: Use named initializers in the struct parse_events_error variable to avoid breaking the build on centos5, 6 and others with a similar gcc: cc1: warnings being treated as errors tests/parse-events.c: In function 'test_event': tests/parse-events.c:1696: error: missing initializer tests/parse-events.c:1696: error: (near initialization for 'err.str') Reported-by: Kim Phillips <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Hendrik Brueckner <[email protected]> Cc: Martin Schwidefsky <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Richter <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf report powerpc: Fix crash if callchain is emptySandipan Das1-1/+1
For some cases, the callchain provided by the kernel may be empty. So, the callchain ip filtering code will cause a crash if we do not check whether the struct ip_callchain pointer is NULL before accessing any members. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf record -b -e cycles:u ls Before: # perf report --branch-history perf: Segmentation fault -------- backtrace -------- perf[0x1027615c] linux-vdso64.so.1(__kernel_sigtramp_rt64+0x0)[0x7fff856304d8] perf(arch_skip_callchain_idx+0x44)[0x10257c58] perf[0x1017f2e4] perf(thread__resolve_callchain+0x124)[0x1017ff5c] perf(sample__resolve_callchain+0xf0)[0x10172788] ... After: # perf report --branch-history Samples: 25 of event 'cycles:u', Event count (approx.): 2306870 Overhead Source:Line Symbol Shared Object + 11.60% _init+35736 [.] _init ls + 9.84% strcoll_l.c:137 [.] __strcoll_l libc-2.26.so + 9.16% memcpy.S:175 [.] __memcpy_power7 libc-2.26.so + 9.01% gconv_charset.h:54 [.] _nl_find_locale libc-2.26.so + 8.87% dl-addr.c:52 [.] _dl_addr libc-2.26.so + 8.83% _init+236 [.] _init ls ... Reported-by: Ravi Bangoria <[email protected]> Signed-off-by: Sandipan Das <[email protected]> Acked-by: Ravi Bangoria <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Naveen N. Rao <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf test session topology: Fix test on s390Thomas Richter1-0/+1
On s390 this test case fails because the socket identifiction numbers assigned to the CPU are higher than the CPU identification numbers. F/ix this by adding the platform architecture into the perf data header flag information. This helps identifiing the test platform and handles s390 specifics in process_cpu_topology(). Before: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-iUv755 socket_id number is too big.You may need to upgrade the perf tool. ---- end ---- Session topology: Skip [root@p23lp27 perf]# After: [root@p23lp27 perf]# perf test -vvvvv -F 39 39: Session topology : --- start --- templ file: /tmp/perf-test-8X8VTs CPU 0, core 0, socket 6 CPU 1, core 1, socket 3 ---- end ---- Session topology: Ok [root@p23lp27 perf]# Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Fixes: c84974ed9fb6 ("perf test: Add entry to test cpu topology") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25perf record: Support s390 random socket_id assignmentThomas Richter1-1/+9
On s390 the socket identifier assigned to a CPU identifier is random and (depending on the configuration of the LPAR) may be higher than the CPU identifier. This is currently not supported. Fix this by allowing arbitrary socket identifiers being assigned to CPU id. Output before: [root@p23lp27 perf]# ./perf report --header -I -v ... socket_id number is too big.You may need to upgrade the perf tool. Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # Core ID and Socket ID information is not available ... [root@p23lp27 perf]# Output after: [root@p23lp27 perf]# ./perf report --header -I -v ... Error: The perf.data file has no samples! # ======== # captured on : Tue May 29 09:29:57 2018 # header version : 1 ... # CPU 0: Core ID 0, Socket ID 6 # CPU 1: Core ID 1, Socket ID 3 # CPU 2: Core ID -1, Socket ID -1 ... [root@p23lp27 perf]# Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-06-25staging: android: ion: Return an ERR_PTR in ion_map_kernelLaura Abbott1-1/+1
The expected return value from ion_map_kernel is an ERR_PTR. The error path for a vmalloc failure currently just returns NULL, triggering a warning in ion_buffer_kmap_get. Encode the vmalloc failure as an ERR_PTR. Reported-by: [email protected] Signed-off-by: Laura Abbott <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25staging: comedi: quatech_daqp_cs: fix no-op loop daqp_ao_insn_write()Dan Carpenter1-1/+1
There is a '>' vs '<' typo so this loop is a no-op. Fixes: d35dcc89fc93 ("staging: comedi: quatech_daqp_cs: fix daqp_ao_insn_write()") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Ian Abbott <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25kconfig: document Kconfig source file commentsRandy Dunlap1-0/+6
I saw this type of Kconfig construct on LKML: config SYMBOOL #bool "prompt string" default y and wondered what it does. Then I wondered if '#' comments are even documented. They aren't, so add a little doc for that. Ah, good. kconfig says: arch/x86/Kconfig:2942:warning: config symbol defined without type Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25kconfig: fix line numbers for if-entries in menu treeDirk Gouders1-2/+2
The line numers for if-entries in the menu tree are off by one or more lines which is confusing when debugging for correctness of unrelated changes. According to the git log, commit a02f0570ae201c49 (kconfig: improve error handling in the parser) was the last one that changed that part of the parser and replaced "if_entry: T_IF expr T_EOL" by "if_entry: T_IF expr nl" but the commit message does not state why this has been done. When reverting that part of the commit, only the line numers are corrected (checked with cdebug = DEBUG_PARSE in zconf.y), otherwise the menu tree remains unchanged (checked with zconfdump() enabled in conf.c). An example for the corrected line numbers: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:4:if drivers/soc/tegra/Kconfig:6:if changes to: drivers/soc/Kconfig:15:source drivers/soc/tegra/Kconfig drivers/soc/tegra/Kconfig:1:if drivers/soc/tegra/Kconfig:4:if Signed-off-by: Dirk Gouders <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25stack-protector: Fix test with 32-bit userland and CONFIG_64BIT=ySven Joachim1-1/+1
When building a 64-bit 4.18-rc1 kernel with a 32-bit userland, I noticed that stack protection was silently disabled. Adding -m64 in gcc-x86_64-has-stack-protector.sh fixed that, similar to what has been noticed in commit 2a61f4747eea ("stack-protector: test compiler capability in Kconfig and drop AUTO mode") for gcc-x86_32-has-stack-protector.sh. Signed-off-by: Sven Joachim <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25powerpc: Remove -Wattribute-alias pragmasPaul Burton7-32/+0
With SYSCALL_DEFINEx() disabling -Wattribute-alias generically, there's no need to duplicate that for PowerPC syscalls. This reverts commit 415520373975 ("powerpc: fix build failure by disabling attribute-alias warning in pci_32") and commit 2479bfc9bc60 ("powerpc: Fix build by disabling attribute-alias warning for SYSCALL_DEFINEx"). Signed-off-by: Paul Burton <[email protected]> Acked-by: Christophe Leroy <[email protected]> Acked-by: Michael Ellerman <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25disable -Wattribute-alias warning for SYSCALL_DEFINEx()Arnd Bergmann2-1/+11
gcc-8 warns for every single definition of a system call entry point, e.g.: include/linux/compat.h:56:18: error: 'compat_sys_rt_sigprocmask' alias between functions of incompatible types 'long int(int, compat_sigset_t *, compat_sigset_t *, compat_size_t)' {aka 'long int(int, struct <anonymous> *, struct <anonymous> *, unsigned int)'} and 'long int(long int, long int, long int, long int)' [-Werror=attribute-alias] asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))\ ^~~~~~~~~~ include/linux/compat.h:45:2: note: in expansion of macro 'COMPAT_SYSCALL_DEFINEx' COMPAT_SYSCALL_DEFINEx(4, _##name, __VA_ARGS__) ^~~~~~~~~~~~~~~~~~~~~~ kernel/signal.c:2601:1: note: in expansion of macro 'COMPAT_SYSCALL_DEFINE4' COMPAT_SYSCALL_DEFINE4(rt_sigprocmask, int, how, compat_sigset_t __user *, nset, ^~~~~~~~~~~~~~~~~~~~~~ include/linux/compat.h:60:18: note: aliased declaration here asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ ^~~~~~~~~~ The new warning seems reasonable in principle, but it doesn't help us here, since we rely on the type mismatch to sanitize the system call arguments. After I reported this as GCC PR82435, a new -Wno-attribute-alias option was added that could be used to turn the warning off globally on the command line, but I'd prefer to do it a little more fine-grained. Interestingly, turning a warning off and on again inside of a single macro doesn't always work, in this case I had to add an extra statement inbetween and decided to copy the __SC_TEST one from the native syscall to the compat syscall macro. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83256 for more details about this. [[email protected]: - Rebase atop current master. - Split GCC & version arguments to __diag_ignore() in order to match changes to the preceding patch. - Add the comment argument to match the preceding patch.] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435 Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Paul Burton <[email protected]> Tested-by: Christophe Leroy <[email protected]> Tested-by: Stafford Horne <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25kbuild: add macro for controlling warnings to linux/compiler.hArnd Bergmann2-0/+43
I have occasionally run into a situation where it would make sense to control a compiler warning from a source file rather than doing so from a Makefile using the $(cc-disable-warning, ...) or $(cc-option, ...) helpers. The approach here is similar to what glibc uses, using __diag() and related macros to encapsulate a _Pragma("GCC diagnostic ...") statement that gets turned into the respective "#pragma GCC diagnostic ..." by the preprocessor when the macro gets expanded. Like glibc, I also have an argument to pass the affected compiler version, but decided to actually evaluate that one. For now, this supports GCC_4_6, GCC_4_7, GCC_4_8, GCC_4_9, GCC_5, GCC_6, GCC_7, GCC_8 and GCC_9. Adding support for CLANG_5 and other interesting versions is straightforward here. GNU compilers starting with gcc-4.2 could support it in principle, but "#pragma GCC diagnostic push" was only added in gcc-4.6, so it seems simpler to not deal with those at all. The same versions show a large number of warnings already, so it seems easier to just leave it at that and not do a more fine-grained control for them. The use cases I found so far include: - turning off the gcc-8 -Wattribute-alias warning inside of the SYSCALL_DEFINEx() macro without having to do it globally. - Reducing the build time for a simple re-make after a change, once we move the warnings from ./Makefile and ./scripts/Makefile.extrawarn into linux/compiler.h - More control over the warnings based on other configurations, using preprocessor syntax instead of Makefile syntax. This should make it easier for the average developer to understand and change things. - Adding an easy way to turn the W=1 option on unconditionally for a subdirectory or a specific file. This has been requested by several developers in the past that want to have their subsystems W=1 clean. - Integrating clang better into the build systems. Clang supports more warnings than GCC, and we probably want to classify them as default, W=1, W=2 etc, but there are cases in which the warnings should be classified differently due to excessive false positives from one or the other compiler. - Adding a way to turn the default warnings into errors (e.g. using a new "make E=0" tag) while not also turning the W=1 warnings into errors. This patch for now just adds the minimal infrastructure in order to do the first of the list above. As the #pragma GCC diagnostic takes precedence over command line options, the next step would be to convert a lot of the individual Makefiles that set nonstandard options to use __diag() instead. [[email protected]: - Rebase atop current master. - Add __diag_GCC, or more generally __diag_<compiler>, abstraction to avoid code outside of linux/compiler-gcc.h needing to duplicate knowledge about different GCC versions. - Add a comment argument to __diag_{ignore,warn,error} which isn't used in the expansion of the macros but serves to push people to document the reason for using them - per feedback from Kees Cook. - Translate severity to GCC-specific pragmas in linux/compiler-gcc.h rather than using GCC-specific in linux/compiler_types.h. - Drop all but GCC 8 macros, since we only need to define macros for versions that we need to introduce pragmas for, and as of this series that's just GCC 8. - Capitalize comments in linux/compiler-gcc.h to match the style of the rest of the file. - Line up macro definitions with tabs in linux/compiler-gcc.h.] Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Paul Burton <[email protected]> Tested-by: Christophe Leroy <[email protected]> Tested-by: Stafford Horne <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-06-25usb: typec: tcpm: fix logbuffer index is wrong if _tcpm_log is re-enteredPeter Chen1-3/+4
The port->logbuffer_head may be wrong if the two processes enters _tcpm_log at the mostly same time. The 2nd process enters _tcpm_log before the 1st process update the index, then the 2nd process will not allocate logbuffer, when the 2nd process tries to use log buffer, the index has already updated by the 1st process, so it will get NULL pointer for updated logbuffer, the error message like below: tcpci 0-0050: Log buffer index 6 is NULL Cc: Heikki Krogerus <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Jun Li <[email protected]> Signed-off-by: Peter Chen <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Cc: stable <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25typec: tcpm: Fix a msecs vs jiffies bugDan Carpenter1-1/+2
The tcpm_set_state() function take msecs not jiffies. Fixes: f0690a25a140 ("staging: typec: USB Type-C Port Manager (tcpm)") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Heikki Krogerus <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25NFC: pn533: Fix wrong GFP flag usageHans de Goede1-2/+2
pn533_recv_response() is an urb completion handler, so it must use GFP_ATOMIC. pn533_usb_send_frame() OTOH runs from a regular sleeping context, so the pn533_submit_urb_for_response() there (and only there) can use the regular GFP_KERNEL flags. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514134 Fixes: 9815c7cf22da ("NFC: pn533: Separate physical layer from ...") Cc: Michael Thalmeier <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: cdc_acm: Add quirk for Uniden UBC125 scannerHouston Yaroschoff1-0/+3
Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff <[email protected]> Cc: stable <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25staging/typec: fix tcpci_rt1711h build errorsRandy Dunlap1-0/+1
Fix Kconfig warning and build errors in staging/typec/rt1711h.c. The driver uses I2C interfaces so it should depend on I2C. WARNING: unmet direct dependencies detected for TYPEC_TCPCI Depends on [m]: STAGING [=y] && TYPEC_TCPM [=y] && I2C [=m] Selected by [y]: - TYPEC_RT1711H [=y] && STAGING [=y] && TYPEC_TCPM [=y] and then: drivers/staging/typec/tcpci.o: In function `tcpci_probe': ../drivers/staging/typec/tcpci.c:536: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_init': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci.o: In function `tcpci_i2c_driver_exit': ../drivers/staging/typec/tcpci.c:593: undefined reference to `i2c_del_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_check_revision': ../drivers/staging/typec/tcpci_rt1711h.c:218: undefined reference to `i2c_smbus_read_word_data' ../drivers/staging/typec/tcpci_rt1711h.c:225: undefined reference to `i2c_smbus_read_word_data' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_probe': ../drivers/staging/typec/tcpci_rt1711h.c:251: undefined reference to `__devm_regmap_init_i2c' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_init': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_register_driver' drivers/staging/typec/tcpci_rt1711h.o: In function `rt1711h_i2c_driver_exit': ../drivers/staging/typec/tcpci_rt1711h.c:308: undefined reference to `i2c_del_driver' Fixes: ce08eaeb6388 ("staging: typec: rt1711h typec chip driver") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Cc: ShuFan Lee <[email protected]> Cc: [email protected] Reviewed-by: Guenter Roeck <[email protected]> Revieved-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: typec: ucsi: Fix for incorrect status data issueHeikki Krogerus1-0/+13
According to UCSI Specification, Connector Change Event only means a change in the Connector Status and Operation Mode fields of the STATUS data structure. So any other change should create another event. Unfortunately on some platforms the firmware acting as PPM (platform policy manager - usually embedded controller firmware) still does not report any other status changes if there is a connector change event. So if the connector power or data role was changed when a device was plugged to the connector, the driver does not get any indication about that. The port will show wrong roles if that happens. To fix the issue, always checking the data and power role together with a connector change event. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Signed-off-by: Heikki Krogerus <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: typec: ucsi: acpi: Workaround for cache mode issueHeikki Krogerus1-0/+5
This fixes an issue where the driver fails with an error: ioremap error for 0x3f799000-0x3f79a000, requested 0x2, got 0x0 On some platforms the UCSI ACPI mailbox SystemMemory Operation Region may be setup before the driver has been loaded. That will lead into the driver failing to map the mailbox region, as it has been already marked as write-back memory. acpi_os_ioremap() for x86 uses ioremap_cache() unconditionally. When the issue happens, the embedded controller has a pending query event for the UCSI notification right after boot-up which causes the operation region to be setup before UCSI driver has been loaded. The fix is to notify acpi core that the driver is about to access memory region which potentially overlaps with an operation region right before mapping it. acpi_release_memory() will check if the memory has already been setup (mapped) by acpi core, and deactivate it (unmap) if it has. The driver is then able to map the memory with ioremap_nocache() and set the memtype to uncached for the region. Reported-by: Paul Menzel <[email protected]> Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: [email protected] Signed-off-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25acpi: Add helper for deactivating memory regionHeikki Krogerus2-0/+75
Sometimes memory resource may be overlapping with SystemMemory Operation Region by design, for example if the memory region is used as a mailbox for communication with a firmware in the system. One occasion of such mailboxes is USB Type-C Connector System Software Interface (UCSI). With regions like that, it is important that the driver is able to map the memory with the requirements it has. For example, the driver should be allowed to map the memory as non-cached memory. However, if the operation region has been accessed before the driver has mapped the memory, the memory has been marked as write-back by the time the driver is loaded. That means the driver will fail to map the memory if it expects non-cached memory. To work around the problem, introducing helper that the drivers can use to temporarily deactivate (unmap) SystemMemory Operation Regions that overlap with their IO memory. Fixes: 8243edf44152 ("usb: typec: ucsi: Add ACPI driver") Cc: [email protected] Reviewed-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: xhci: increase CRS timeout valueAjay Gupta1-1/+6
Some controllers take almost 55ms to complete controller restore state (CRS). There is no timeout limit mentioned in xhci specification so fixing the issue by increasing the timeout limit to 100ms [reformat code comment -Mathias] Signed-off-by: Ajay Gupta <[email protected]> Signed-off-by: Nagaraj Annaiah <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: xhci: tegra: fix runtime PM error handlingStefan Agner1-2/+2
The address-of operator will always evaluate to true. However, power should be explicitly disabled if no power domain is used. Remove the address-of operator. Fixes: 58c38116c6cc ("usb: xhci: tegra: Add support for managing powergates") Signed-off-by: Stefan Agner <[email protected]> Acked-by: Jon Hunter <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25usb: xhci: remove the code build warningDongjiu Geng1-1/+1
Initialize the 'err' variate to remove the build warning, the warning is shown as below: drivers/usb/host/xhci-tegra.c: In function 'tegra_xusb_mbox_thread': drivers/usb/host/xhci-tegra.c:552:6: warning: 'err' may be used uninitialized in this function [-Wuninitialized] drivers/usb/host/xhci-tegra.c:482:6: note: 'err' was declared here Fixes: e84fce0f8837 ("usb: xhci: Add NVIDIA Tegra XUSB controller driver") Signed-off-by: Dongjiu Geng <[email protected]> Acked-by: Thierry Reding <[email protected]> Acked-by: Jon Hunter <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25xhci: Fix kernel oops in trace_xhci_free_virt_deviceZhengjun Xing2-7/+33
commit 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") set dev->udev pointer to NULL in xhci_free_dev(), it will cause kernel panic in trace_xhci_free_virt_device. This patch reimplement the trace function trace_xhci_free_virt_device, remove dev->udev dereference and added more useful parameters to show in the trace function,it also makes sure dev->udev is not NULL before calling trace_xhci_free_virt_device. This issue happened when xhci-hcd trace is enabled and USB devices hot plug test. Original use-after-free patch went to stable so this needs so be applied there as well. [ 1092.022457] usb 2-4: USB disconnect, device number 6 [ 1092.092772] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 1092.101694] PGD 0 P4D 0 [ 1092.104601] Oops: 0000 [#1] SMP [ 1092.207734] Workqueue: usb_hub_wq hub_event [ 1092.212507] RIP: 0010:trace_event_raw_event_xhci_log_virt_dev+0x6c/0xf0 [ 1092.220050] RSP: 0018:ffff8c252e883d28 EFLAGS: 00010086 [ 1092.226024] RAX: ffff8c24af86fa84 RBX: 0000000000000003 RCX: ffff8c25255c2a01 [ 1092.234130] RDX: 0000000000000000 RSI: 00000000aef55009 RDI: ffff8c252e883d28 [ 1092.242242] RBP: ffff8c252550e2c0 R08: ffff8c24af86fa84 R09: 0000000000000a70 [ 1092.250364] R10: 0000000000000a70 R11: 0000000000000000 R12: ffff8c251f21a000 [ 1092.258468] R13: 000000000000000c R14: ffff8c251f21a000 R15: ffff8c251f432f60 [ 1092.266572] FS: 0000000000000000(0000) GS:ffff8c252e880000(0000) knlGS:0000000000000000 [ 1092.275757] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.282281] CR2: 0000000000000000 CR3: 0000000154209001 CR4: 00000000003606e0 [ 1092.290384] Call Trace: [ 1092.293156] <IRQ> [ 1092.295439] xhci_free_virt_device.part.34+0x182/0x1a0 [ 1092.301288] handle_cmd_completion+0x7ac/0xfa0 [ 1092.306336] ? trace_event_raw_event_xhci_log_trb+0x6e/0xa0 [ 1092.312661] xhci_irq+0x3e8/0x1f60 [ 1092.316524] __handle_irq_event_percpu+0x75/0x180 [ 1092.321876] handle_irq_event_percpu+0x20/0x50 [ 1092.326922] handle_irq_event+0x36/0x60 [ 1092.331273] handle_edge_irq+0x6d/0x180 [ 1092.335644] handle_irq+0x16/0x20 [ 1092.339417] do_IRQ+0x41/0xc0 [ 1092.342782] common_interrupt+0xf/0xf [ 1092.346955] </IRQ> Fixes: 44a182b9d177 ("xhci: Fix use-after-free in xhci_free_virt_device") Cc: <[email protected]> Signed-off-by: Zhengjun Xing <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25xhci: Fix perceived dead host due to runtime suspend race with event handlerMathias Nyman2-3/+41
Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-06-25Merge tag 'fixes-for-v4.18-rc1' of ↵Greg Kroah-Hartman13-45/+167
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v4.18-rc1 First set of fixes for the current -rc cycle. The main parts being warnings of different kinds being fixed. We're also adding support for Intel'l Icelake devices on dwc3-pci.c.
2018-06-25Revert "lib/test_printf.c: call wait_for_random_bytes() before plain %p tests"Petr Mladek1-7/+0
This reverts commit ee410f15b1418f2f4428e79980674c979081bcb7. It might prevent the machine from boot. It would wait for enough randomness at the very beginning of kernel_init(). But there is basically nothing running in parallel that would help to produce any randomness. Reported-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Petr Mladek <[email protected]>
2018-06-25ALSA: seq: Fix UBSAN warning at SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT ioctlTakashi Iwai1-1/+2
The kernel may spew a WARNING with UBSAN undefined behavior at handling ALSA sequencer ioctl SNDRV_SEQ_IOCTL_QUERY_NEXT_CLIENT: UBSAN: Undefined behaviour in sound/core/seq/seq_clientmgr.c:2007:14 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_seq_ioctl_query_next_client+0x1ac/0x1d0 sound/core/seq/seq_clientmgr.c:2007 snd_seq_ioctl+0x264/0x3d0 sound/core/seq/seq_clientmgr.c:2144 .... It happens only when INT_MAX is passed there, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200211 Signed-off-by: Takashi Iwai <[email protected]>
2018-06-25ALSA: timer: Fix UBSAN warning at SNDRV_TIMER_IOCTL_NEXT_DEVICE ioctlTakashi Iwai1-1/+1
The kernel may spew a WARNING about UBSAN undefined behavior at handling ALSA timer ioctl SNDRV_TIMER_IOCTL_NEXT_DEVICE: UBSAN: Undefined behaviour in sound/core/timer.c:1524:19 signed integer overflow: 2147483647 + 1 cannot be represented in type 'int' Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x122/0x1c8 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x86 lib/ubsan.c:159 handle_overflow+0x1c2/0x21f lib/ubsan.c:190 __ubsan_handle_add_overflow+0x2a/0x31 lib/ubsan.c:198 snd_timer_user_next_device sound/core/timer.c:1524 [inline] __snd_timer_user_ioctl+0x204d/0x2520 sound/core/timer.c:1939 snd_timer_user_ioctl+0x67/0x95 sound/core/timer.c:1994 .... It happens only when a value with INT_MAX is passed, as we're incrementing it unconditionally. So the fix is trivial, check the value with INT_MAX. Although the bug itself is fairly harmless, it's better to fix it so that fuzzers won't hit this again later. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200213 Reported-and-tested-by: Team OWL337 <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-06-25ALSA: hda/realtek - Fix the problem of two front mics on more machinesHui Wang1-1/+8
We have 3 more Lenovo machines, they all have 2 front mics on them, so they need the fixup to change the location for one of two mics. Among these 3 Lenovo machines, one of them has the same pin cfg as the machine with subid 0x17aa3138, so use the pin cfg table to apply fixup for them. The rest machines don't share the same pin cfg, so far use the subid to apply fixup for them. Fixes: a3dafb2200bf ("ALSA: hda/realtek - adjust the location of one mic") Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.