| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull kvm fixes from Paolo Bonzini:
"Two small fixes, one of which was being worked around in selftests"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Retry page fault if MMU reload is pending and root has no sp
KVM: selftests: vmx_pmu_msrs_test: Drop tests mangling guest visible CPUIDs
KVM: x86: Drop guest CPUID check for host initiated writes to MSR_IA32_PERF_CAPABILITIES
|
|
Pull block revert from Jens Axboe:
"It turns out that the fix for not hammering on the delayed work timer
too much caused a performance regression for BFQ, so let's revert the
change for now.
I've got some ideas on how to fix it appropriately, but they should
wait for 5.17"
* tag 'block-5.16-2021-12-19' of git://git.kernel.dk/linux-block:
Revert "block: reduce kblockd_mod_delayed_work_on() CPU consumption"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Clear the PCI_MSIX_FLAGS_MASKALL bit too on the error path so that it
is restored to its reset state
- Mask MSI-X vectors late on the init path in order to handle
out-of-spec Marvell NVME devices which apparently look at the MSI-X
mask even when MSI-X is disabled
* tag 'irq_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Clear PCI_MSIX_FLAGS_MASKALL on error
PCI/MSI: Mask MSI-X vectors only on success
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Make sure the CLOCK_REALTIME to CLOCK_MONOTONIC offset is never
positive
* tag 'timers_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Really make sure wall_to_monotonic isn't positive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Fix the rtmutex condition checking when the optimistic spinning of a
waiter needs to be terminated
* tag 'locking_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rtmutex: Fix incorrect condition in rtmutex_spin_on_owner()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull signal handlign fix from Borislav Petkov:
- Prevent lock contention on the new sigaltstack lock on the
common-case path, when no changes have been made to the alternative
signal stack.
* tag 'core_urgent_for_v5.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
signal: Skip the altstack update when not needed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
- only enable pci_remap_iospace() for Ralink devices
* tag 'mips-fixes_5.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Only define pci_remap_iospace() for Ralink
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix a recently introduced oops at boot on 85xx in some configurations.
Fix crashes when loading some livepatch modules with
STRICT_MODULE_RWX.
Thanks to Joe Lawrence, Russell Currey, and Xiaoming Ni"
* tag 'powerpc-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/module_64: Fix livepatching for RO modules
powerpc/85xx: Fix oops when CONFIG_FSL_PMC=n
|
|
Pull cifs fixes from Steve French:
"Two cifs/smb3 fixes, one fscache related, and one mount parsing
related for stable"
* tag '5.16-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: sanitize multiple delimiters in prepath
cifs: ignore resource_id while getting fscache super cookie
|
|
Play nice with a NULL shadow page when checking for an obsolete root in
the page fault handler by flagging the page fault as stale if there's no
shadow page associated with the root and KVM_REQ_MMU_RELOAD is pending.
Invalidating memslots, which is the only case where _all_ roots need to
be reloaded, requests all vCPUs to reload their MMUs while holding
mmu_lock for lock.
The "special" roots, e.g. pae_root when KVM uses PAE paging, are not
backed by a shadow page. Running with TDP disabled or with nested NPT
explodes spectaculary due to dereferencing a NULL shadow page pointer.
Skip the KVM_REQ_MMU_RELOAD check if there is a valid shadow page for the
root. Zapping shadow pages in response to guest activity, e.g. when the
guest frees a PGD, can trigger KVM_REQ_MMU_RELOAD even if the current
vCPU isn't using the affected root. I.e. KVM_REQ_MMU_RELOAD can be seen
with a completely valid root shadow page. This is a bit of a moot point
as KVM currently unloads all roots on KVM_REQ_MMU_RELOAD, but that will
be cleaned up in the future.
Fixes: a955cad84cda ("KVM: x86/mmu: Retry page fault if root is invalidated by memslot update")
Cc: [email protected]
Cc: Maxim Levitsky <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Host initiated writes to MSR_IA32_PERF_CAPABILITIES should not depend
on guest visible CPUIDs and (incorrect) KVM logic implementing it is
about to change. Also, KVM_SET_CPUID{,2} after KVM_RUN is now forbidden
and causes test to fail.
Reported-by: kernel test robot <[email protected]>
Fixes: feb627e8d6f6 ("KVM: x86: Forbid KVM_SET_CPUID{,2} after KVM_RUN")
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
MSR_IA32_PERF_CAPABILITIES
The ability to write to MSR_IA32_PERF_CAPABILITIES from the host should
not depend on guest visible CPUID entries, even if just to allow
creating/restoring guest MSRs and CPUIDs in any sequence.
Fixes: 27461da31089 ("KVM: x86/pmu: Support full width counting")
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Vitaly Kuznetsov <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This reverts commit cb2ac2912a9ca7d3d26291c511939a41361d2d83.
Alex and the kernel test robot report that this causes a significant
performance regression with BFQ. I can reproduce that result, so let's
revert this one as we're close to -rc6 and we there's no point in trying
to rush a fix.
Link: https://lore.kernel.org/linux-block/1639853092.524jxfaem2.none@localhost/
Link: https://lore.kernel.org/lkml/20211219141852.GH14057@xsang-OptiPlex-9020/
Reported-by: Alex Xu (Hello71) <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When replugging the device the following message shows up:
gpio gpiochip2: (dln2): detected irqchip that is shared with multiple gpiochips: please fix the driver.
This also has the effect that interrupts won't work.
The same problem would also show up if multiple devices where plugged in.
Fix this by allocating the irq_chip data structure per instance like other
drivers do.
I don't know when this problem appeared, but it is present in 5.10.
Cc: <[email protected]> # 5.10+
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <[email protected]>
Fixes: f5dcccd647da ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34d4 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two small tty/serial fixes for 5.16-rc6. They include:
- n_hdlc fix for syzbot reported problem that you were previously
copied on.
- 8250_fintek driver fix that resolved a console problem by removing
a previous change.
Both have been in linux-next with no reported issues"
* tag 'tty-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_fintek: Fix garbled text for console
tty: n_hdlc: make n_hdlc_tty_wakeup() asynchronous
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported problems.
They include:
- dwc2 driver fixes
- xhci driver fixes
- cdnsp driver fixes
- typec driver fix
- gadget u_ether driver fix
- new quirk additions
- usb gadget endpoint calculation fix
- usb serial new device ids
- revert of a xhci-dbg change that broke early debug booting
All changes, except for the revert, have been in linux-next with no
reported problems. The revert was from yesterday, and it was reported
by the developers affected that it resolved their problem"
* tag 'usb-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: early: convert to readl_poll_timeout_atomic()"
usb: typec: tcpm: fix tcpm unregister port but leave a pending timer
usb: cdnsp: Fix lack of spin_lock_irqsave/spin_lock_restore
USB: NO_LPM quirk Lenovo USB-C to Ethernet Adapher(RTL8153-04)
usb: xhci: Extend support for runtime power management for AMD's Yellow carp.
usb: dwc2: fix STM ID/VBUS detection startup delay in dwc2_driver_probe
USB: gadget: bRequestType is a bitfield, not a enum
USB: serial: option: add Telit FN990 compositions
USB: serial: cp210x: fix CP2105 GPIO registration
usb: cdnsp: Fix incorrect status for control request
usb: cdnsp: Fix issue in cdnsp_log_ep trace event
usb: cdnsp: Fix incorrect calling of cdnsp_died function
usb: xhci-mtk: fix list_del warning when enable list debug
usb: gadget: u_ether: fix race in setting MAC address in setup phase
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix segfaults in 'perf inject' related to usage of unopened files
- The return value of hashmap__new() should be checked using IS_ERR()
* tag 'perf-tools-fixes-for-v5.16-2021-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf inject: Fix segfault due to perf_data__fd() without open
perf inject: Fix segfault due to close without open
perf expr: Fix missing check for return value of hashmap__new()
|
|
The return value of kcalloc() needs to be checked.
To avoid dereference of null pointer in case of the failure of alloc.
Therefore, it might be better to change the return type of
qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and
return 0 the others.
Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable()
should deal with the return value of qlcnic_sriov_alloc_vlans().
Fixes: 154d0c810c53 ("qlcnic: VLAN enhancement for 84XX adapters")
Signed-off-by: Jiasheng Jiang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The existing cleanup routine implementation is not well synchronized
with the syscall routine. When a device is detaching, below race could
occur.
static int ax25_sendmsg(...) {
...
lock_sock()
ax25 = sk_to_ax25(sk);
if (ax25->ax25_dev == NULL) // CHECK
...
ax25_queue_xmit(skb, ax25->ax25_dev->dev); // USE
...
}
static void ax25_kill_by_device(...) {
...
if (s->ax25_dev == ax25_dev) {
s->ax25_dev = NULL;
...
}
Other syscall functions like ax25_getsockopt, ax25_getname,
ax25_info_show also suffer from similar races. To fix them, this patch
introduce lock_sock() into ax25_kill_by_device in order to guarantee
that the nullify action in cleanup routine cannot proceed when another
socket request is pending.
Signed-off-by: Hanjie Wu <[email protected]>
Signed-off-by: Lin Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The previous commit 3e0588c291d6 ("hamradio: defer ax25 kfree after
unregister_netdev") reorder the kfree operations and unregister_netdev
operation to prevent UAF.
This commit improves the previous one by also deferring the nullify of
the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs.
Partial of the stack trace is shown below.
BUG: kernel NULL pointer dereference, address: 0000000000000538
RIP: 0010:ax_xmit+0x1f9/0x400
...
Call Trace:
dev_hard_start_xmit+0xec/0x320
sch_direct_xmit+0xea/0x240
__qdisc_run+0x166/0x5c0
__dev_queue_xmit+0x2c7/0xaf0
ax25_std_establish_data_link+0x59/0x60
ax25_connect+0x3a0/0x500
? security_socket_connect+0x2b/0x40
__sys_connect+0x96/0xc0
? __hrtimer_init+0xc0/0xc0
? common_nsleep+0x2e/0x50
? switch_fpu_return+0x139/0x1a0
__x64_sys_connect+0x11/0x20
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The crash point is shown as below
static void ax_encaps(...) {
...
set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL!
...
}
By placing the nullify action after the unregister_netdev, the ax->tty
pointer won't be assigned as NULL net_device framework layer is well
synchronized.
Signed-off-by: Lin Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-17
Maciej Fijalkowski says:
It seems that previous [0] Rx fix was not enough and there are still
issues with AF_XDP Rx ZC support in ice driver. Elza reported that for
multiple XSK sockets configured on a single netdev, some of them were
becoming dead after a while. We have spotted more things that needed to
be addressed this time. More of information can be found in particular
commit messages.
It also carries Alexandr's patch that was sent previously which was
overlapping with this set.
[0]: https://lore.kernel.org/bpf/[email protected]/
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The fixed commit attempts to get the output file descriptor even if the
file was never opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__GI___fileno (fp=0x0) at fileno.c:35
35 fileno.c: No such file or directory.
(gdb) bt
#0 __GI___fileno (fp=0x0) at fileno.c:35
#1 0x00005621e48dd987 in perf_data__fd (data=0x7fff4c68bd08) at util/data.h:72
#2 perf_data__fd (data=0x7fff4c68bd08) at util/data.h:69
#3 cmd_inject (argc=<optimized out>, argv=0x7fff4c69c1f0) at builtin-inject.c:1017
#4 0x00005621e4936783 in run_builtin (p=0x5621e4ee6878 <commands+600>, argc=4, argv=0x7fff4c69c1f0) at perf.c:313
#5 0x00005621e4897d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#6 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#7 main (argc=4, argv=0x7fff4c69c1f0) at perf.c:539
(gdb)
Fixes: 0ae03893623dd1dd ("perf tools: Pass a fd to perf_file_header__read_pipe()")
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The fixed commit attempts to close inject.output even if it was never
opened e.g.
$ perf record uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (7 samples) ]
$ perf inject -i perf.data --vm-time-correlation=dry-run
Segmentation fault (core dumped)
$ gdb --quiet perf
Reading symbols from perf...
(gdb) r inject -i perf.data --vm-time-correlation=dry-run
Starting program: /home/ahunter/bin/perf inject -i perf.data --vm-time-correlation=dry-run
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
48 iofclose.c: No such file or directory.
(gdb) bt
#0 0x00007eff8afeef5b in _IO_new_fclose (fp=0x0) at iofclose.c:48
#1 0x0000557fc7b74f92 in perf_data__close (data=data@entry=0x7ffcdafa6578) at util/data.c:376
#2 0x0000557fc7a6b807 in cmd_inject (argc=<optimized out>, argv=<optimized out>) at builtin-inject.c:1085
#3 0x0000557fc7ac4783 in run_builtin (p=0x557fc8074878 <commands+600>, argc=4, argv=0x7ffcdafb6a60) at perf.c:313
#4 0x0000557fc7a25d5c in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:365
#5 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:409
#6 main (argc=4, argv=0x7ffcdafb6a60) at perf.c:539
(gdb)
Fixes: 02e6246f5364d526 ("perf inject: Close inject.output on exit")
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The hashmap__new() function may return ERR_PTR(-ENOMEM) when malloc()
fails, add IS_ERR() checking for ctx->ids.
Signed-off-by: Miaoqian Lin <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
[ s/kfree()/free()/ and add missing linux/err.h include ]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Optimistic spinning needs to be terminated when the spinning waiter is not
longer the top waiter on the lock, but the condition is negated. It
terminates if the waiter is the top waiter, which is defeating the whole
purpose.
Fixes: c3123c431447 ("locking/rtmutex: Dont dereference waiter lockless")
Signed-off-by: Zqiang <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Avoid double free in tun_free_netdev() by moving the
dev->tstats and tun->security allocs to a new ndo_init routine
(tun_net_init()) that will be called by register_netdevice().
ndo_init is paired with the desctructor (tun_free_netdev()),
so if there's an error in register_netdevice() the destructor
will handle the frees.
BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605
CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1
Hardware name: Red Hat KVM, BIOS
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247
kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372
____kasan_slab_free mm/kasan/common.c:346 [inline]
__kasan_slab_free+0x107/0x120 mm/kasan/common.c:374
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:1723 [inline]
slab_free_freelist_hook mm/slub.c:1749 [inline]
slab_free mm/slub.c:3513 [inline]
kfree+0xac/0x2d0 mm/slub.c:4561
selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605
security_tun_dev_free_security+0x4f/0x90 security/security.c:2342
tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215
netdev_run_todo+0x4df/0x840 net/core/dev.c:10627
rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112
__tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302
tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported-by: syzkaller <[email protected]>
Signed-off-by: George Kennedy <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In line:
upper = info->upper_dev;
We access upper_dev field, which is related only for particular events
(e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory
access for another events,
when ptr is not netdev_notifier_changeupper_info.
The KASAN logs are as follows:
[ 30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[ 30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778
[ 30.139866]
[ 30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6
[ 30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT)
[ 30.153056] Call trace:
[ 30.155547] dump_backtrace+0x0/0x2c0
[ 30.159320] show_stack+0x18/0x30
[ 30.162729] dump_stack_lvl+0x68/0x84
[ 30.166491] print_address_description.constprop.0+0x74/0x2b8
[ 30.172346] kasan_report+0x1e8/0x250
[ 30.176102] __asan_load8+0x98/0xe0
[ 30.179682] prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[ 30.186847] prestera_netdev_event_handler+0x1b4/0x1c0 [prestera]
[ 30.193313] raw_notifier_call_chain+0x74/0xa0
[ 30.197860] call_netdevice_notifiers_info+0x68/0xc0
[ 30.202924] register_netdevice+0x3cc/0x760
[ 30.207190] register_netdev+0x24/0x50
[ 30.211015] prestera_device_register+0x8a0/0xba0 [prestera]
Fixes: 3d5048cc54bd ("net: marvell: prestera: move netdev topology validation to prestera_main")
Signed-off-by: Yevhen Orlov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In case, when some ports is in list and we don't find requested - we
return last iterator state and not return NULL as expected.
Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Yevhen Orlov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This reverts commit 86c3a3e964d910a62eeb277d60b2a60ebefa9feb.
The tipc_aead_init() function can be calling from an interrupt routine.
This allocation might sleep with GFP_KERNEL flag, hence the following BUG
is reported.
[ 17.657509] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:230
[ 17.660916] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3
[ 17.664093] preempt_count: 302, expected: 0
[ 17.665619] RCU nest depth: 2, expected: 0
[ 17.667163] Preemption disabled at:
[ 17.667165] [<0000000000000000>] 0x0
[ 17.669753] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 5.16.0-rc4+ #1
[ 17.673006] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
[ 17.675540] Call Trace:
[ 17.676285] <IRQ>
[ 17.676913] dump_stack_lvl+0x34/0x44
[ 17.678033] __might_resched.cold+0xd6/0x10f
[ 17.679311] kmem_cache_alloc_trace+0x14d/0x220
[ 17.680663] tipc_crypto_start+0x4a/0x2b0 [tipc]
[ 17.682146] ? kmem_cache_alloc_trace+0xd3/0x220
[ 17.683545] tipc_node_create+0x2f0/0x790 [tipc]
[ 17.684956] tipc_node_check_dest+0x72/0x680 [tipc]
[ 17.686706] ? ___cache_free+0x31/0x350
[ 17.688008] ? skb_release_data+0x128/0x140
[ 17.689431] tipc_disc_rcv+0x479/0x510 [tipc]
[ 17.690904] tipc_rcv+0x71c/0x730 [tipc]
[ 17.692219] ? __netif_receive_skb_core+0xb7/0xf60
[ 17.693856] tipc_l2_rcv_msg+0x5e/0x90 [tipc]
[ 17.695333] __netif_receive_skb_list_core+0x20b/0x260
[ 17.697072] netif_receive_skb_list_internal+0x1bf/0x2e0
[ 17.698870] ? dev_gro_receive+0x4c2/0x680
[ 17.700255] napi_complete_done+0x6f/0x180
[ 17.701657] virtnet_poll+0x29c/0x42e [virtio_net]
[ 17.703262] __napi_poll+0x2c/0x170
[ 17.704429] net_rx_action+0x22f/0x280
[ 17.705706] __do_softirq+0xfd/0x30a
[ 17.706921] common_interrupt+0xa4/0xc0
[ 17.708206] </IRQ>
[ 17.708922] <TASK>
[ 17.709651] asm_common_interrupt+0x1e/0x40
[ 17.711078] RIP: 0010:default_idle+0x18/0x20
Fixes: 86c3a3e964d9 ("tipc: use consistent GFP flags")
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Hoang Le <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If the user sets a lower mtu on the CPU port than on the switch,
then DMA inserts a few more bytes into the buffer than expected.
In the worst case, it may exceed the size of the buffer. The
experiments showed that the buffer should be a multiple of the
burst length value. This patch rounds the length of the rx buffer
upwards and fixes this bug. The reservation of FCS space in the
buffer has been removed as PMAC strips the FCS.
Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames")
Reported-by: Thomas Nixon <[email protected]>
Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Paul Blakey says:
====================
net/sched: Fix ct zone matching for invalid conntrack state
Currently, when a packet is marked as invalid conntrack_in in act_ct,
post_ct will be set, and connection info (nf_conn) will be removed
from the skb. Later openvswitch and flower matching will parse this
as ct_state=+trk+inv. But because the connection info is missing,
there is also no zone info to match against even though the packet
is tracked.
This series fixes that, by passing the last executed zone by act_ct.
The zone info is passed along from act_ct to the ct flow dissector
(used by flower to extract zone info) and to ovs, the same way as post_ct
is passed, via qdisc layer skb cb to dissector, and via skb extension
to OVS.
Since adding any more data to qdisc skb cb, there will be no room
for BPF skb cb to extend it and stay under skb->cb size, this series
moves the tc related info from within qdisc skb cb to a tc specific cb
that also extends it.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Zone id is not restored if we passed ct and ct rejected the connection,
as there is no ct info on the skb.
Save the zone from tc skb cb to tc skb extension and pass it on to
ovs, use that info to restore the zone id for invalid connections.
Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct")
Signed-off-by: Paul Blakey <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.
To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).
Fixes: 7baf2429a1a9 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
BPF layer extends the qdisc control block via struct bpf_skb_data_end
and because of that there is no more room to add variables to the
qdisc layer control block without going over the skb->cb size.
Extend the qdisc control block with a tc control block,
and move all tc related variables to there as a pre-step for
extending the tc control block with additional members.
Signed-off-by: Paul Blakey <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fix from Damien Le Moal:
"A single fix for this cycle:
- Check that ATA16 passthrough commands that do not transfer any data
have a DMA direction set to DMA_NONE (From George)"
* tag 'libata-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
libata: if T_LENGTH is zero, dma direction should be DMA_NONE
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
"One fix and one trivial update for rc6:
- Add MODULE_ALIAS_FS to get automatic module loading on mount
(Naohiro)
- Update Damien's email address in the MAINTAINERS file (me)"
* tag 'zonefs-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
MAITAINERS: Change zonefs maintainer email address
zonefs: add MODULE_ALIAS_FS
|
|
mount.cifs can pass a device with multiple delimiters in it. This will
cause rename(2) to fail with ENOENT.
V2:
- Make sanitize_path more readable.
- Fix multiple delimiters between UNC and prepath.
- Avoid a memory leak if a bad user starts putting a lot of delimiters
in the path on purpose.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2031200
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api")
Cc: [email protected] # 5.11+
Acked-by: Ronnie Sahlberg <[email protected]>
Signed-off-by: Thiago Rafael Becker <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
We have a cyclic dependency between fscache super cookie
and root inode cookie. The super cookie relies on
tcon->resource_id, which gets populated from the root inode
number. However, fetching the root inode initializes inode
cookie as a child of super cookie, which is yet to be populated.
resource_id is only used as auxdata to check the validity of
super cookie. We can completely avoid setting resource_id to
remove the circular dependency. Since vol creation time and
vol serial numbers are used for auxdata, we should be fine.
Additionally, there will be auxiliary data check for each
inode cookie as well.
Fixes: 5bf91ef03d98 ("cifs: wait for tcon resource_id before getting fscache super")
CC: David Howells <[email protected]>
Signed-off-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Even after commit e1d7ba873555 ("time: Always make sure wall_to_monotonic
isn't positive") it is still possible to make wall_to_monotonic positive
by running the following code:
int main(void)
{
struct timespec time;
clock_gettime(CLOCK_MONOTONIC, &time);
time.tv_nsec = 0;
clock_settime(CLOCK_REALTIME, &time);
return 0;
}
The reason is that the second parameter of timespec64_compare(), ts_delta,
may be unnormalized because the delta is calculated with an open coded
substraction which causes the comparison of tv_sec to yield the wrong
result:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -9, .tv_nsec = -900000000 }
That makes timespec64_compare() claim that wall_to_monotonic < ts_delta,
but actually the result should be wall_to_monotonic > ts_delta.
After normalization, the result of timespec64_compare() is correct because
the tv_sec comparison is not longer misleading:
wall_to_monotonic = { .tv_sec = -10, .tv_nsec = 900000000 }
ts_delta = { .tv_sec = -10, .tv_nsec = 100000000 }
Use timespec64_sub() to ensure that ts_delta is normalized, which fixes the
issue.
Fixes: e1d7ba873555 ("time: Always make sure wall_to_monotonic isn't positive")
Signed-off-by: Yu Liao <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One driver fix: the pm8001 has never actually worked on a system with
an IOMMU and this fixes that use case"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: pm8001: Fix phys_to_virt() usage on dma_addr_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes, almost all error handling one-liners and for stable.
- regression fix in directory logging items
- regression fix of extent buffer status bits handling after an error
- fix memory leak in error handling path in tree-log
- fix freeing invalid anon device number when handling errors during
subvolume creation
- fix warning when freeing leaf after subvolume creation failure
- fix missing blkdev put in device scan error handling
- fix invalid delayed ref after subvolume creation failure"
* tag 'for-5.16-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix missing blkdev_put() call in btrfs_scan_one_device()
btrfs: fix warning when freeing leaf after subvolume creation failure
btrfs: fix invalid delayed ref after subvolume creation failure
btrfs: check WRITE_ERR when trying to read an extent buffer
btrfs: fix missing last dir item offset update when logging directory
btrfs: fix double free of anon_dev after failure to create subvolume
btrfs: fix memory leak in __add_inode_ref()
|
|
If the workqueue allocation fails, the driver is marked as not initialized,
and timer and panic_notifier will be left registered.
Instead of removing those when workqueue allocation fails, do the workqueue
initialization before doing it, and cleanup srcu_struct if it fails.
Fixes: 1d49eb91e86e ("ipmi: Move remove_work to dedicated workqueue")
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Cc: Corey Minyard <[email protected]>
Cc: Ioanna Alifieraki <[email protected]>
Cc: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
|
|
In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.
Fixes: 913a89f009d9 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Cc: Corey Minyard <[email protected]>
Cc: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Corey Minyard <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux fix for v5.16 to ensure that we don't block on
memory allocations while holding a spinlock.
This passes all our tests without problem"
* tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix sleeping function called from invalid context
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of DT updates for the SiFive HiFive Unmatched, that fix the
regulator handling. These should stop some warning spew.
- A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
that correctly hook up the MMC card detect signal.
* tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
riscv: dts: sifive unmatched: Fix regulator for board rev3
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
riscv: dts: sifive unmatched: Expose the board ID eeprom
riscv: dts: sifive unmatched: Name gpio lines
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
|
|
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing an issue with the worker creation change
that was merged last week"
* tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
io-wq: drop wqe lock before creating new worker
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
"A bunch of driver fixes, notably:
- uninit variable fix for dw-axi-dmac driver
- return value check dw-edma driver
- calling wq quiesce inside spinlock and missed completion for idxd
driver
- mod alias fix for st_fdma driver"
* tag 'dmaengine-fix-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: st_fdma: fix MODULE_ALIAS
dmaengine: idxd: fix missed completion on abort path
dmaengine: ti: k3-udma: Fix smatch warnings
dmaengine: idxd: fix calling wq quiesce inside spinlock
dmaengine: dw-edma: Fix return value check for dma_set_mask_and_coherent()
dmaengine: dw-axi-dmac: Fix uninitialized variable in axi_chan_block_xfer_start()
|
|
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and
later on during the Rx processing it is incremented per each frame that
driver consumed. This can result in excessive buffers requested from xsk
pool based on that value.
To address this, just drop cleaned_count and pass
ICE_DESC_UNUSED(rx_ring) directly as a function argument to
ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed.
Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of
ice_clean_rx_irq_zc. This has been changed in that way for corresponding
ice_clean_rx_irq, but not here.
Fixes: 2d4238f55697 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <[email protected]>
Tested-by: Kiran Bhandare <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|