| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Current csky's swappon is broken by wrong swap PTE entry format.
Now redesign the new format for abiv1 & abiv2 and make swappon +
zram work properly on csky machines.
C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC
attributes. GLOBAL bit is shared by two pages in the same tlb
entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte.
To distinguish PAGE_NONE and swp_pte, we need to use an additional
bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE).
Signed-off-by: Guo Ren <[email protected]>
Cc: Arnd Bergmann <[email protected]>
|
|
The commit 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at
parsing rates for UAC2/3") changed the behavior of the function
set_sample_rate_v2v3() slightly to treat the inconsistent sample rate
as an error. It was done by assumption that the sample rate
validation should have been done at the parser phase as implemented in
that patch. But the validation is later selectively enabled only for
certain devices as it causes a regression (the commit fe773b8711e3
"ALSA: usb-audio: workaround for iface reset issue"), and now the
inconsistency surfaced as a fatal error while it worked in the past as
is, as reported for FiiO M3K DAC.
For recovering from the regression, change set_sample_rate_v2v3()
again to ignore the sample rate difference as non-error.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1182633
Fixes: 93db51d06b32 ("ALSA: usb-audio: Check valid altsetting at parsing rates for UAC2/3")
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
C-SKY page table attributes only have 'Dirty' and 'Valid' to
emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'.
This patch cleanup unnecessary definition.
Signed-off-by: Guo Ren <[email protected]>
Cc: Arnd Bergmann <[email protected]>
|
|
Some randconfig builds fail with undefined references to _mcount
when CONFIG_TRIM_UNUSED_KSYMS is set:
ERROR: modpost: "_mcount" [drivers/tee/optee/optee.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fsi/fsi-occ.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fpga/dfl-pci.ko] undefined!
Since there is already a list of symbols that get generated at link
time, add this one as well.
Fixes: fbe078d397b4 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
After the following patches,
commit de043da0b9e7 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
commit 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area")
commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
The CPU hotplug support has been tested on QEMU, Spike, and SiFive
Unleashed so let's enable it by default in RV32 and RV64 defconfigs.
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
In theory these are orthogonal, but in practice all NUMA systems are
SMP. NUMA && !SMP doesn't build, everyone else is coupling them, and I
don't really see any value in supporting that configuration.
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Suggested-by: Andrew Morton <[email protected]>
Suggested-by: Atish Patra <[email protected]>
Reported-by: Kefeng Wang <[email protected]>
Tested-by: Kefeng Wang <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
|
|
Michael Chan says:
====================
bnxt_en: Error recovery bug fixes.
Two error recovery related bug fixes for 2 corner cases.
Please queue patch #2 for -stable. Thanks.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The following trace excerpt corresponds with a NULL pointer dereference
of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many
device resets:
Unable to handle kernel NULL pointer dereference at ... 000000d
...
pc : string+0x3c/0x80
lr : vsnprintf+0x294/0x7e0
sp : ffff00000f61ba70 pstate : 20000145
x29: ffff00000f61ba70 x28: 000000000000000d
x27: ffff0000009c8b5a x26: ffff00000f61bb80
x25: ffff0000009c8b5a x24: 0000000000000012
x23: 00000000ffffffe0 x22: ffff000008990428
x21: ffff00000f61bb80 x20: 000000000000000d
x19: 000000000000001f x18: 0000000000000000
x17: 0000000000000000 x16: ffff800b6d0fb400
x15: 0000000000000000 x14: ffff800b7fe31ae8
x13: 00001ed16472c920 x12: ffff000008c6b1c9
x11: ffff000008cf0580 x10: ffff00000f61bb80
x9 : 00000000ffffffd8 x8 : 000000000000000c
x7 : ffff800b684b8000 x6 : 0000000000000000
x5 : 0000000000000065 x4 : 0000000000000001
x3 : ffff0a00ffffff04 x2 : 000000000000001f
x1 : 0000000000000000 x0 : 000000000000000d
Call trace:
string+0x3c/0x80
vsnprintf+0x294/0x7e0
snprintf+0x44/0x50
__bnxt_open_nic+0x34c/0x928 [bnxt_en]
bnxt_open+0xe8/0x238 [bnxt_en]
__dev_open+0xbc/0x130
__dev_change_flags+0x12c/0x168
dev_change_flags+0x20/0x60
...
Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining)
would not be expected on a system supporting MSIX at all. However, if
bnxt_init_int_mode() does not end up being called after the call to
bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will
think that only INTA is supported and bp->irq_tbl will be NULL,
causing the above crash.
In the error recovery scenario, we call bnxt_clear_int_mode() in
bnxt_fw_reset_close() early in the sequence. Ordinarily, we will
call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we
reestablish communication with the firmware after reset. However,
if the sequence has to abort before we call bnxt_init_int_mode() and
if the user later attempts to re-open the device, then it will cause
the crash above.
We fix it in 2 ways:
1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call
bnxt_init_init_mode().
2. If we need to abort in bnxt_hwrm_if_change() and cannot complete
the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This
will cause more drastic recovery at the next attempt to re-open the
device, including a call to bnxt_init_int_mode().
Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.")
Reviewed-by: Scott Branden <[email protected]>
Signed-off-by: Edwin Peer <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The driver's error recovery reset sequence can take many seconds to
complete and only the critical sections are protected by rtnl_lock.
A recent change has introduced a regression in this sequence.
bnxt_remove_one() may be called while the recovery is in progress.
Normally, unregister_netdev() would cause bnxt_close_nic() to be
called and this would cause the error recovery to safely abort
with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic().
Recently, we added bnxt_reinit_after_abort() to allow the user to
reopen the device after an aborted recovery. This causes the
regression in the scenario described above because we would
attempt to re-open even after the netdev has been unregistered.
Fix it by checking the netdev reg_state in
bnxt_reinit_after_abort() and abort if it is unregistered.
Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset")
Signed-off-by: Vasundhara Volam <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ido Schimmel says:
====================
mlxsw: Various fixes
This patchset contains various fixes for mlxsw.
Patch #1 fixes a race condition in a selftest. The race and fix are
explained in detail in the changelog.
Patch #2 re-adds a link mode that was wrongly removed, resulting in a
regression in some setups.
Patch #3 fixes a race condition in route installation with nexthop
objects.
Please consider patches #2 and #3 for stable.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Routes are currently processed from a workqueue whereas nexthop objects
are processed in system call context. This can result in the driver not
finding a suitable nexthop group for a route and issuing a warning [1].
Fix this by ignoring such routes earlier in the process. The subsequent
deletion notification will be ignored as well.
[1]
WARNING: CPU: 2 PID: 7754 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4853 mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum]
[...]
CPU: 2 PID: 7754 Comm: kworker/u8:0 Not tainted 5.11.0-rc6-cq-20210207-1 #16
Hardware name: Mellanox Technologies Ltd. MSN2100/SA001390, BIOS 5.6.5 05/24/2018
Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib_event_work [mlxsw_spectrum]
RIP: 0010:mlxsw_sp_router_fib_event_work+0x1112/0x1e00 [mlxsw_spectrum]
Fixes: cdd6cfc54c64 ("mlxsw: spectrum_router: Allow programming routes with nexthop objects")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Alex Veber <[email protected]>
Tested-by: Alex Veber <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, only external bits are added to the PTYS register, whereas
there is one external bit that is wrongly marked as internal, and so was
recently removed from the register.
Add that bit to the PTYS register again, as this bit is no longer
internal.
Its removal resulted in '100000baseLR4_ER4/Full' link mode no longer
being supported, causing a regression on some setups.
Fixes: 5bf01b571cf4 ("mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register")
Signed-off-by: Danielle Ratson <[email protected]>
Reported-by: Eddie Shklaer <[email protected]>
Tested-by: Eddie Shklaer <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent, so that it is
always valid.
Fixes: b5b029399fa6d ("selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP test")
Signed-off-by: Danielle Ratson <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
getsockopt(TCP_ZEROCOPY_RECEIVE) has a bug where we read a
user-provided "len" field of type signed int, and then compare the
value to the result of an "offsetofend" operation, which is unsigned.
Negative values provided by the user will be promoted to large
positive numbers; thus checking that len < offsetofend() will return
false when the intention was that it return true.
Note that while len is originally checked for negative values earlier
on in do_tcp_getsockopt(), subsequent calls to get_user() re-read the
value from userspace which may have changed in the meantime.
Therefore, re-add the check for negative values after the call to
get_user in the handler code for TCP_ZEROCOPY_RECEIVE.
Fixes: c8856c051454 ("tcp-zerocopy: Return inq along with tcp receive zerocopy.")
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: Arjun Roy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When accessing the timecounter register on an i.MX8MQ the kernel hangs.
This is only the case when the interface is down. This can be reproduced
by reading with 'phc_ctrl eth0 get'.
Like described in the change in 91c0d987a9788dcc5fe26baafd73bf9242b68900
the igp clock is disabled when the interface is down and leads to a
system hang.
So we check if the ptp clock status before reading the timecounter
register.
Signed-off-by: Heiko Thiery <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When CONFIG_PM_SLEEP is disabled, the compiler warns about unused
functions:
drivers/net/phy/phy_device.c:273:12: error: unused function 'mdio_bus_phy_suspend' [-Werror,-Wunused-function]
static int mdio_bus_phy_suspend(struct device *dev)
drivers/net/phy/phy_device.c:293:12: error: unused function 'mdio_bus_phy_resume' [-Werror,-Wunused-function]
static int mdio_bus_phy_resume(struct device *dev)
The logic is intentional, so just mark these two as __maybe_unused
and remove the incorrect #ifdef.
Fixes: 4c0d2e96ba05 ("net: phy: consider that suspend2ram may cut off PHY power")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The new GPIO support may be optional at runtime, but it requires
building against gpiolib:
ERROR: modpost: "gpiochip_get_data" [drivers/net/dsa/mt7530.ko]
undefined!
ERROR: modpost: "devm_gpiochip_add_data_with_key"
[drivers/net/dsa/mt7530.ko] undefined!
Add #ifdef to exclude GPIO support if GPIOLIB is not enabled.
Fixes: 429a0edeefd8 ("net: dsa: mt7530: MT7530 optional GPIO support")
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: DENG Qingfang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When the ocelot driver code is in a library, the dsa tag
code cannot be built-in:
ld.lld: error: undefined symbol: ocelot_can_inject
>>> referenced by tag_ocelot_8021q.c
>>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a
ld.lld: error: undefined symbol: ocelot_port_inject_frame
>>> referenced by tag_ocelot_8021q.c
>>> dsa/tag_ocelot_8021q.o:(ocelot_xmit) in archive net/built-in.a
Building the tag support only really makes sense for compile-testing
when the driver is available, so add a Kconfig dependency that prevents
the broken configuration while allowing COMPILE_TEST alternative when
MSCC_OCELOT_SWITCH_LIB is disabled entirely. This case is handled
through the #ifdef check in include/soc/mscc/ocelot.h.
Fixes: 0a6f17c6ae21 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Without this option, the driver fails to link:
ld.lld: error: undefined symbol: devlink_sb_register
>>> referenced by ocelot_devlink.c
>>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a
>>> referenced by ocelot_devlink.c
>>> net/ethernet/mscc/ocelot_devlink.o:(ocelot_devlink_sb_register) in archive drivers/built-in.a
Fixes: f59fd9cab730 ("net: mscc: ocelot: configure watermarks using devlink-sb")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Joakim Zhang says:
====================
ethernet: fixes for stmmac driver
Fixes for stmmac driver.
---
ChangeLogs:
V1->V2:
* subject prefix: ethernet: stmmac: -> net: stmmac:
* use dma_addr_t instead of unsigned int for physical address
* use cpu_to_le32()
V2->V3:
* fix the build issue pointed out by kbuild bot.
* add error handling for stmmac_reinit_rx_buffers() function.
V3->V4:
* remove patch (net: stmmac: remove redundant null check for ptp clock),
reviewer thinks it should target net-next.
V4->V5:
* use %pad format to print dma_addr_t.
* extend dwmac4_display_ring() to support all descriptor types.
* while() -> do-while()
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
During suspend/resume stress test, we found descriptor write back by DMA
could exhibit unusual behavior, e.g.:
003 [0xc4310030]: 0x0 0x40 0x0 0xb5010040
We can see that desc3 write back is 0xb5010040, it is still ownd by DMA,
so application would not recycle this buffer. It will trigger fatal bus
error when DMA try to use this descriptor again. To fix this issue, we
should re-init all rx buffers when mac resume back.
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In current driver, buffer2 available only when hardware supports split
header. Wrongly set buffer2 valid in stmmac_rx_refill when refill buffer
address. You can see that desc3 is 0x81000000 after initialization, but
turn out to be 0x83000000 after refill.
Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Driver uses dma_alloc_coherent to allocate dma memory for descriptors,
dma_alloc_coherent will return both the virtual address and physical
address. AFAIK, virt_to_phys could not convert virtual address to
physical address, for which memory is allocated by dma_alloc_coherent.
dwmac4_display_ring() function is broken for various descriptor, it only
support normal descriptor(struct dma_desc) now, this patch also extends to
support all descriptor types.
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
stmmac_xmit() call stmmac_tx_timer_arm() at the end to modify tx timer to
do the transmission cleanup work. Imagine such a situation, stmmac enters
suspend immediately after tx timer modified, it's expire callback
stmmac_tx_clean() would not be invoked. This could affect BQL, since
netdev_tx_sent_queue() has been called, but netdev_tx_completed_queue()
have not been involved, as a result, dql_avail(&dev_queue->dql) finally
always return a negative value.
__dev_queue_xmit->__dev_xmit_skb->qdisc_run->__qdisc_run->qdisc_restart->dequeue_skb:
if ((q->flags & TCQ_F_ONETXQUEUE) &&
netif_xmit_frozen_or_stopped(txq)) // __QUEUE_STATE_STACK_XOFF is set
Net core will stop transmitting any more. Finillay, net watchdong would timeout.
To fix this issue, we should call netdev_tx_reset_queue() in stmmac_resume().
Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If clear GMAC_CONFIG_TE bit, it would stop all tx channels, but users
may only want to stop specific tx channel.
Fixes: 48863ce5940f ("stmmac: add DMA support for GMAC 4.xx")
Signed-off-by: Joakim Zhang <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes, nothing all that
notable"
* tag 'docs-5.12-2' of git://git.lwn.net/linux:
docs: proc.rst: fix indentation warning
Documentation: cgroup-v2: fix path to example BPF program
docs: powerpc: Fix tables in syscall64-abi.rst
Documentation: features: refresh feature list
Documentation: features: remove c6x references
docs: ABI: testing: ima_policy: Fixed missing bracket
Fix unaesthetic indentation
scripts: kernel-doc: fix array element capture in pointer-to-func parsing
doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
Documentation: proc.rst: add more about the 6 fields in loadavg
|
|
Pull OpenRISC updates from Stafford Horne:
- Update for Litex SoC controller to support wider width registers as
well as reset.
- Refactor SMP code to use device tree to define possible cpus.
- Update build including generating vmlinux.bin
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Use devicetree to determine present cpus
drivers/soc/litex: Add restart handler
openrisc: add arch/openrisc/Kbuild
drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g
drivers/soc/litex: separate MMIO from subregister offset calculation
drivers/soc/litex: move generic accessors to litex.h
openrisc: restart: Call common handlers before hanging
openrisc: Add vmlinux.bin target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix physical vs virtual confusion in some basic mm macros and
routines. Caused by __pa == __va on s390 currently.
- Get rid of on-stack cpu masks.
- Add support for complete CPU counter set extraction.
- Add arch_irq_work_raise implementation.
- virtio-ccw revision and opcode fixes.
* tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Add support for complete counter set extraction
virtio/s390: implement virtio-ccw revision 2 correctly
s390/smp: implement arch_irq_work_raise()
s390/topology: move cpumasks away from stack
s390/smp: smp_emergency_stop() - move cpumask away from stack
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
s390/smp: consolidate locking for smp_rescan()
s390/mm: fix phys vs virt confusion in vmem_*() functions family
s390/mm: fix phys vs virt confusion in pgtable allocation routines
s390/mm: fix invalid __pa() usage in pfn_pXd() macros
s390/mm: make pXd_deref() macros return a pointer
s390/opcodes: rename selhhhr to selfhr
|
|
Pull cifs updates from Steve French:
- improvements to mode bit conversion, chmod and chown when using
cifsacl mount option
- two new mount options for controlling attribute caching
- improvements to crediting and reconnect, improved debugging
- reconnect fix
- add SMB3.1.1 dialect to default dialects for vers=3
* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
cifs: update internal version number
cifs: use discard iterator to discard unneeded network data more efficiently
cifs: introduce helper for finding referral server to improve DFS target resolution
cifs: check all path components in resolved dfs target
cifs: fix DFS failover
cifs: fix nodfs mount option
cifs: fix handling of escaped ',' in the password mount argument
cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
cifs: convert revalidate of directories to using directory metadata cache timeout
cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
cifs: If a corrupted DACL is returned by the server, bail out.
cifs: minor simplification to smb2_is_network_name_deleted
TCON Reconnect during STATUS_NETWORK_NAME_DELETED
cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
cifs: Change SIDs in ACEs while transferring file ownership.
cifs: Retain old ACEs when converting between mode bits and ACL.
cifs: Fix cifsacl ACE mask for group and others.
cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
cifs: change confusing field serverName (to ip_addr)
cifs: Fix inconsistent IS_ERR and PTR_ERR
...
|
|
Pull more io_uring updates from Jens Axboe:
"A collection of later fixes that we should get into this release:
- Series of submission cleanups (Pavel)
- A few fixes for issues from earlier this merge window (Pavel, me)
- IOPOLL resubmission fix
- task_work locking fix (Hao)"
* tag 'for-5.12/io_uring-2021-02-25' of git://git.kernel.dk/linux-block: (25 commits)
Revert "io_uring: wait potential ->release() on resurrect"
io_uring: fix locked_free_list caches_free()
io_uring: don't attempt IO reissue from the ring exit path
io_uring: clear request count when freeing caches
io_uring: run task_work on io_uring_register()
io_uring: fix leaving invalid req->flags
io_uring: wait potential ->release() on resurrect
io_uring: keep generic rsrc infra generic
io_uring: zero ref_node after killing it
io_uring: make the !CONFIG_NET helpers a bit more robust
io_uring: don't hold uring_lock when calling io_run_task_work*
io_uring: fail io-wq submission from a task_work
io_uring: don't take uring_lock during iowq cancel
io_uring: fail links more in io_submit_sqe()
io_uring: don't do async setup for links' heads
io_uring: do io_*_prep() early in io_submit_sqe()
io_uring: split sqe-prep and async setup
io_uring: don't submit link on error
io_uring: move req link into submit_state
io_uring: move io_init_req() into io_submit_sqe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two memory encryption related patches (SWIOTLB is enabled by default
for AMD-SEV):
- Add support for alignment so that NVME can properly work
- Keep track of requested DMA buffers length, as underlaying hardware
devices can trip SWIOTLB to bounce too much and crash the kernel
And a tiny fix to use proper APIs in drivers"
* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Validate bounce size in the sync/unmap path
nvme-pci: set min_align_mask
swiotlb: respect min_align_mask
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
swiotlb: refactor swiotlb_tbl_map_single
swiotlb: clean up swiotlb_tbl_unmap_single
swiotlb: factor out a nr_slots helper
swiotlb: factor out an io_tlb_offset helper
swiotlb: add a IO_TLB_SIZE define
driver core: add a min_align_mask field to struct device_dma_parameters
sdhci: stop poking into swiotlb internals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Besides the usual fixes and new drivers, we are changing CLASS_FLASH
to return success to make it easier to work with V4L2 stuff disabled,
and we are getting rid of enum that should have been plain integer
long time ago. I'm slightly nervous about potential warnings, but it
needed to be fixed at some point"
* tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: lp50xx: Get rid of redundant explicit casting
leds: lp50xx: Update headers block to reflect reality
leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable()
leds: lp50xx: Reduce level of dereferences
leds: lp50xx: Switch to new style i2c-driver probe function
leds: lp50xx: Don't spam logs when probe is deferred
leds: apu: extend support for PC Engines APU1 with newer firmware
leds: flash: Fix multicolor no-ops registration by return 0
leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH
leds: lgm: Add LED controller driver for LGM SoC
dt-bindings: leds: Add bindings for Intel LGM SoC
leds: led-core: Get rid of enum led_brightness
leds: gpio: Set max brightness to 1
leds: lm3533: Switch to using the new API kobj_to_dev()
leds: ss4200: simplify the return expression of register_nasgpio_led()
leds: Use DEVICE_ATTR_{RW, RO, WO} macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia update from Dominik Brodowski:
"Improve the use of the kobj API in the core of the Linux PCMCIA
subsystem"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Switch to using the new API kobj_to_dev()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.12
First set of fixes for v5.12. One iwlwifi kernel crash fix and smaller
fixes to multiple drivers.
ath9k
* fix Spatial Multiplexing Power Save (SMPS) handling to improve thoughtput
mt76
* error handling fixes
* memory leax fixes
iwlwifi
* don't crash during debug collection on DVM devices
MAINTAINERS
* email address update
ath11k
* fix GCC warning about DMA address debug messages
* fix regression which broke QCA6390 AP mode
* tag 'wireless-drivers-2021-02-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers:
mt76: mt7915: fix unused 'mode' variable
mt76: dma: do not report truncated frames to mac80211
mt76: mt7921: remove incorrect error handling
iwlwifi: pcie: fix iwl_so_trans_cfg link error when CONFIG_IWLMVM is disabled
ath11k: fix AP mode for QCA6390
ath11k: qmi: use %pad to format dma_addr_t
MAINTAINERS: update for mwifiex driver maintainers
iwlwifi: avoid crash on unsupported debug collection
mt76: mt7915: only modify tx buffer list after allocating tx token id
mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
ath9k: fix transmitting to stations in dynamic SMPS mode
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The big one is a fix for the VHE enabling path during early boot,
where the code enabling the MMU wasn't necessarily in the identity map
of the new page-tables, resulting in a consistent crash with 64k
pages. In fixing that, we noticed some missing barriers too, so we
added those for the sake of architectural compliance.
Other than that, just the usual merge window trickle. There'll be more
to come, too.
Summary:
- Fix lockdep false alarm on resume-from-cpuidle path
- Fix memory leak in kexec_file
- Fix module linker script to work with GDB
- Fix error code when trying to use uprobes with AArch32 instructions
- Fix late VHE enabling with 64k pages
- Add missing ISBs after TLB invalidation
- Fix seccomp when tracing syscall -1
- Fix stacktrace return code at end of stack
- Fix inconsistent whitespace for pointer return values
- Fix compiler warnings when building with W=1"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: stacktrace: Report when we reach the end of the stack
arm64: ptrace: Fix seccomp of traced syscall -1 (NO_SYSCALL)
arm64: Add missing ISB after invalidating TLB in enter_vhe
arm64: Add missing ISB after invalidating TLB in __primary_switch
arm64: VHE: Enable EL2 MMU from the idmap
KVM: arm64: make the hyp vector table entries local
arm64/mm: Fixed some coding style issues
arm64: uprobe: Return EOPNOTSUPP for AARCH32 instruction probing
kexec: move machine_kexec_post_load() to public interface
arm64 module: set plt* section addresses to 0x0
arm64: kexec_file: fix memory leakage in create_dtb() when fdt_open_into() fails
arm64: spectre: Prevent lockdep splat on v4 mitigation enable path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Only a single change. NULL parameter check in the local ColdFire
clocking code"
* tag 'm68knommu-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: let clk_enable() return immediately if clk is NULL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two fixes:
- Fix an unsafe printf string usage in a kmem trace event
- Fix spelling in output from the latency-collector tool"
* tag 'trace-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/tools: fix a couple of spelling mistakes
mm, tracing: Fix kmem_cache_free trace event to not print stale pointers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull orphan handling fix from Kees Cook:
"Another case of bogus .eh_frame emission was noticed under
CONFIG_GCOV_KERNEL=y.
Summary:
- Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y (Nathan
Chancellor)"
* tag 'orphan-handling-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
vmlinux.lds.h: Define SANITIZER_DISCARDS with CONFIG_GCOV_KERNEL=y
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO fixes from Kees Cook:
"This gets parisc building again and moves LTO artifact caching cleanup
from the 'distclean' build target to 'clean'.
Summary:
- Fix parisc build for ftrace vs mcount (Sami Tolvanen)
- Move .thinlto-cache remove to "clean" from "distclean" (Masahiro Yamada)"
* tag 'clang-lto-v5.12-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: Move .thinlto-cache removal to 'make clean'
parisc: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- A small series for Xen event channels adding some sysfs nodes for per
pv-device settings and statistics, and two fixes of theoretical
problems.
- two minor fixes (one for an unlikely error path, one for a comment).
* tag 'for-linus-5.12b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-front-pgdir-shbuf: don't record wrong grant handle upon error
xen: Replace lkml.org links with lore
xen/evtchn: use READ/WRITE_ONCE() for accessing ring indices
xen/evtchn: use smp barriers for user event ring
xen/events: add per-xenbus device event statistics and settings
|
|
Pull more KVM updates from Paolo Bonzini:
"x86:
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups:
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: SVM: Fix nested VM-Exit on #GP interception handling
KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created
KVM: x86/mmu: Consider the hva in mmu_notifier retry
KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault
KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID
KVM: nSVM: prepare guest save area while is_guest_mode is true
KVM: x86/mmu: Remove a variety of unnecessary exports
KVM: x86: Fold "write-protect large" use case into generic write-protect
KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML
KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging
KVM: x86: Further clarify the logic and comments for toggling log dirty
KVM: x86: Move MMU's PML logic to common code
KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function
KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()
KVM: nVMX: Disable PML in hardware when running L2
KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs
KVM: x86/mmu: Pass the memslot to the rmap callbacks
KVM: x86/mmu: Split out max mapping level calculation to helper
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
KVM: nVMX: no need to undo inject_page_fault change on nested vmexit
...
|
|
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <[email protected]>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
|
|
MIPS page fault path(except huge page) takes 3 exceptions (1 TLB Miss + 2
TLB Invalid), butthe second TLB Invalid exception is just triggered by
__update_tlb from do_page_fault writing tlb without _PAGE_VALID set. With
this patch, user space mapping prot is made young by default (with both
_PAGE_VALID and _PAGE_YOUNG set), and it only take 1 TLB Miss + 1 TLB
Invalid exception
Remove pte_sw_mkyoung without polluting MM code and make page fault delay
of MIPS on par with other architecture
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Huang Pei <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
Acked-by: <[email protected]>
Acked-by: Thomas Bogendoerfer <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: <[email protected]>
Cc: Bibo Mao <[email protected]>
Cc: Jiaxun Yang <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Li Xuefeng <[email protected]>
Cc: Yang Tiezhu <[email protected]>
Cc: Gao Juxin <[email protected]>
Cc: Fuxin Zhang <[email protected]>
Cc: Huacai Chen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On systems with large amounts of reserved memory we may fail to
successfully complete unpack_to_rootfs() and be left with:
Kernel panic - not syncing: write error
this is not too helpful to understand what happened, so let's wrap the
panic() calls with a surrounding show_mem() such that we have a chance of
understanding the memory conditions leading to these allocation failures.
[[email protected]: replace macro with C function]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
Cc: Barret Rhoden <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|