aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-15RDMA/restrack: Increment CQ restrack object before committingLeon Romanovsky1-3/+3
Once the uobj is committed it is immediately possible another thread could destroy it, which worst case, can result in a use-after-free of the restrack objects. Cc: syzkaller <[email protected]> Fixes: 08f294a1524b ("RDMA/core: Add resource tracking for create and destroy CQs") Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15RDMA/uverbs: Protect from command mask overflowLeon Romanovsky1-7/+20
The command number is not bounds checked against the command mask before it is shifted, resulting in an ubsan hit. This does not cause malfunction since the command number is eventually bounds checked, but we can make this ubsan clean by moving the bounds check to before the mask check. ================================================================================ UBSAN: Undefined behaviour in drivers/infiniband/core/uverbs_main.c:647:21 shift exponent 207 is too large for 64-bit type 'long long unsigned int' CPU: 0 PID: 446 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #61 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 __ubsan_handle_shift_out_of_bounds+0x293/0x2f7 ? debug_check_no_locks_freed+0x340/0x340 ? __ubsan_handle_load_invalid_value+0x19b/0x19b ? lock_acquire+0x440/0x440 ? lock_acquire+0x19d/0x440 ? __might_fault+0xf4/0x240 ? ib_uverbs_write+0x68d/0xe20 ib_uverbs_write+0x68d/0xe20 ? __lock_acquire+0xcf7/0x3940 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x35b/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f033f567c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f033f5686bc RCX: 0000000000448e29 RDX: 0000000000000060 RSI: 0000000020001000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000056a0 R14: 00000000006e8740 R15: 0000000000000000 ================================================================================ Cc: syzkaller <[email protected]> Cc: <[email protected]> # 4.5 Fixes: 2dbd5186a39c ("IB/core: IB/core: Allow legacy verbs through extended interfaces") Reported-by: Noa Osherovich <[email protected]> Reviewed-by: Matan Barak <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroyJason Gunthorpe1-2/+3
If remove_commit fails then the lock is left locked while the uobj still exists. Eventually the kernel will deadlock. lockdep detects this and says: test/4221 is leaving the kernel with locks still held! 1 lock held by test/4221: #0: (&ucontext->cleanup_rwsem){.+.+}, at: [<000000001e5c7523>] rdma_explicit_destroy+0x37/0x120 [ib_uverbs] Fixes: 4da70da23e9b ("IB/core: Explicitly destroy an object while keeping uobject") Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2-1/+31
Pull virtio fixes from Michael Tsirkin: "This includes a bugfix for virtio 9p fs. It also fixes hybernation for s390 guests with virtio devices" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio/s390: implement PM operations for virtio_ccw 9p/trans_virtio: discard zero-length reply
2018-02-15IB/uverbs: Improve lockdep_checkJason Gunthorpe1-7/+7
This is really being used as an assert that the expected usecnt is being held and implicitly that the usecnt is valid. Rename it to assert_uverbs_usecnt and tighten the checks to only accept valid values of usecnt (eg 0 and < -1 are invalid). The tigher checkes make the assertion cover more cases and is more likely to find bugs via syzkaller/etc. Fixes: 3832125624b7 ("IB/core: Add support for idr types") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15RDMA/uverbs: Protect from races between lookup and destroy of uobjectsLeon Romanovsky1-1/+9
The race is between lookup_get_idr_uobject and uverbs_idr_remove_uobj -> uverbs_uobject_put. We deliberately do not call sychronize_rcu after the idr_remove in uverbs_idr_remove_uobj for performance reasons, instead we call kfree_rcu() during uverbs_uobject_put. However, this means we can obtain pointers to uobj's that have already been released and must protect against krefing them using kref_get_unless_zero. ================================================================== BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 Read of size 4 at addr ffff88005fda1ac8 by task syz-executor2/441 CPU: 1 PID: 441 Comm: syz-executor2 Not tainted 4.15.0-rc2+ #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 ? uverbs_try_lock_object+0x68/0xc0 ? modify_qp.isra.7+0xdc4/0x10e0 modify_qp.isra.7+0xdc4/0x10e0 ib_uverbs_modify_qp+0xfe/0x170 ? ib_uverbs_query_qp+0x970/0x970 ? __lock_acquire+0xa11/0x1da0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_query_qp+0x970/0x970 ? ib_uverbs_query_qp+0x970/0x970 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? sched_clock_cpu+0x18/0x180 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3b6/0xa30 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f443fee0c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f443fee16bc RCX: 0000000000448e29 RDX: 0000000000000078 RSI: 00000000209f8000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000008e98 R14: 00000000006ebf38 R15: 0000000000000000 Allocated by task 1: kmem_cache_alloc_trace+0x16c/0x2f0 mlx5_alloc_cmd_msg+0x12e/0x670 cmd_exec+0x419/0x1810 mlx5_cmd_exec+0x40/0x70 mlx5_core_mad_ifc+0x187/0x220 mlx5_MAD_IFC+0xd7/0x1b0 mlx5_query_mad_ifc_gids+0x1f3/0x650 mlx5_ib_query_gid+0xa4/0xc0 ib_query_gid+0x152/0x1a0 ib_query_port+0x21e/0x290 mlx5_port_immutable+0x30f/0x490 ib_register_device+0x5dd/0x1130 mlx5_ib_add+0x3e7/0x700 mlx5_add_device+0x124/0x510 mlx5_register_interface+0x11f/0x1c0 mlx5_ib_init+0x56/0x61 do_one_initcall+0xa3/0x250 kernel_init_freeable+0x309/0x3b8 kernel_init+0x14/0x180 ret_from_fork+0x24/0x30 Freed by task 1: kfree+0xeb/0x2f0 mlx5_free_cmd_msg+0xcd/0x140 cmd_exec+0xeba/0x1810 mlx5_cmd_exec+0x40/0x70 mlx5_core_mad_ifc+0x187/0x220 mlx5_MAD_IFC+0xd7/0x1b0 mlx5_query_mad_ifc_gids+0x1f3/0x650 mlx5_ib_query_gid+0xa4/0xc0 ib_query_gid+0x152/0x1a0 ib_query_port+0x21e/0x290 mlx5_port_immutable+0x30f/0x490 ib_register_device+0x5dd/0x1130 mlx5_ib_add+0x3e7/0x700 mlx5_add_device+0x124/0x510 mlx5_register_interface+0x11f/0x1c0 mlx5_ib_init+0x56/0x61 do_one_initcall+0xa3/0x250 kernel_init_freeable+0x309/0x3b8 kernel_init+0x14/0x180 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff88005fda1ab0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 24 bytes inside of 32-byte region [ffff88005fda1ab0, ffff88005fda1ad0) The buggy address belongs to the page: page:00000000d5655c19 count:1 mapcount:0 mapping: (null) index:0xffff88005fda1fc0 flags: 0x4000000000000100(slab) raw: 4000000000000100 0000000000000000 ffff88005fda1fc0 0000000180550008 raw: ffffea00017f6780 0000000400000004 ffff88006c803980 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88005fda1980: fc fc fb fb fb fb fc fc fb fb fb fb fc fc fb fb ffff88005fda1a00: fb fb fc fc fb fb fb fb fc fc 00 00 00 00 fc fc ffff88005fda1a80: fb fb fb fb fc fc fb fb fb fb fc fc fb fb fb fb ffff88005fda1b00: fc fc 00 00 00 00 fc fc fb fb fb fb fc fc fb fb ffff88005fda1b80: fb fb fc fc fb fb fb fb fc fc fb fb fb fb fc fc ==================================================================@ Cc: syzkaller <[email protected]> Cc: <[email protected]> # 4.11 Fixes: 3832125624b7 ("IB/core: Add support for idr types") Reported-by: Noa Osherovich <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Hold the uobj write lock after allocateJason Gunthorpe1-1/+10
This clarifies the design intention that time between allocate and commit has the uobj exclusive to the caller. We already guarantee this by delaying publishing the uobj pointer via idr_insert, fd_install, list_add, etc. Additionally holding the usecnt lock during this period provides extra clarity and more protection against future mistakes. Fixes: 3832125624b7 ("IB/core: Add support for idr types") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Fix possible oops with duplicate ioctl attributesMatan Barak1-0/+3
If the same attribute is listed twice by the user in the ioctl attribute list then error unwind can cause the kernel to deref garbage. This happens when an object with WRITE access is sent twice. The second parse properly fails but corrupts the state required for the error unwind it triggers. Fixing this by making duplicates in the attribute list invalid. This is not something we need to support. The ioctl interface is currently recommended to be disabled in kConfig. Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Add ioctl support for 32bit processesMatan Barak1-0/+2
32 bit processes running on a 64 bit kernel call compat_ioctl so that implementations can revise any structure layout issues. Point compat_ioctl at our normal ioctl because: - All our structures are designed to be the same on 32 and 64 bit, ie we use __aligned_u64 when required and are careful to manage padding. - Any pointers are stored in u64's and userspace is expected to prepare them properly. Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Use __aligned_u64 for uapi headersJason Gunthorpe1-2/+2
This has no impact on the structure layout since these structs already have their u64s already properly aligned, but it does document that we have this requirement for 32 bit compatibility. Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Fix method merging in uverbs_ioctl_mergeMatan Barak1-9/+9
Fix a bug in uverbs_ioctl_merge that looked at the object's iterator number instead of the method's iterator number when merging methods. While we're at it, make the uverbs_ioctl_merge code a bit more clear and faster. Fixes: 118620d3686b ('IB/core: Add uverbs merge trees functionality') Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Use u64_to_user_ptr() not a unionJason Gunthorpe2-8/+6
The union approach will get the endianness wrong sometimes if the kernel's pointer size is 32 bits resulting in EFAULTs when trying to copy to/from user. Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Use inline data transfer for UHW_INJason Gunthorpe1-1/+4
The rule for the API is pointers less than 8 bytes are inlined into the .data field of the attribute. Fix the creation of the driver udata struct to follow this rule and point to the .data itself when the size is less than 8 bytes. Otherwise if the UHW struct is less than 8 bytes the driver will get EFAULT during copy_from_user. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/uverbs: Always use the attribute size provided by the userMatan Barak2-9/+31
This fixes several bugs around the copy_to/from user path: - copy_to used the user provided size of the attribute and could copy data beyond the end of the kernel buffer into userspace. - copy_from didn't know the size of the kernel buffer and could have left kernel memory unexpectedly un-initialized. - copy_from did not use the user length to determine if the attribute data is inlined or not. Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15RDMA/restrack: Remove unimplemented XRCD objectLeon Romanovsky2-9/+0
Resource tracking of XRCD objects is not implemented in current version of restrack and hence can be removed. Fixes: 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15IB/ipoib: Do not warn if IPoIB debugfs doesn't existAlaa Hleihel1-2/+0
netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event multiple times until all refs are gone, which will result in calling ipoib_delete_debug_files multiple times and printing a warning. Remove the WARN_ONCE since checks of NULL pointers before calling debugfs_remove are not needed. Fixes: 771a52584096 ("IB/IPoIB: ibX: failed to create mcg debug file") Signed-off-by: Alaa Hleihel <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Dennis Dalessandro <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-02-15sparc,leon: Select USB_UHCI_BIG_ENDIAN_{MMIO,DESC}James Hogan2-2/+2
Now that USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC are moved outside of the USB_SUPPORT conditional, simply select them from SPARC_LEON rather than by the symbol's defaults in drivers/usb/Kconfig, similar to how it is done for USB_EHCI_BIG_ENDIAN_MMIO and USB_EHCI_BIG_ENDIAN_DESC. Signed-off-by: James Hogan <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Corentin Labbe <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: David S. Miller <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/18560/
2018-02-15usb: Move USB_UHCI_BIG_ENDIAN_* out of USB_SUPPORTJames Hogan2-8/+8
Move the Kconfig symbols USB_UHCI_BIG_ENDIAN_MMIO and USB_UHCI_BIG_ENDIAN_DESC out of drivers/usb/host/Kconfig, which is conditional upon USB && USB_SUPPORT, so that it can be freely selected by platform Kconfig symbols in architecture code. For example once the MIPS_GENERIC platform selects are fixed in commit 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN"), the MIPS 32r6_defconfig warns like so: warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) warning: (MIPS_GENERIC) selects USB_UHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB) Fixes: 2e6522c56552 ("MIPS: Fix typo BIG_ENDIAN to CPU_BIG_ENDIAN") Signed-off-by: James Hogan <[email protected]> Cc: Corentin Labbe <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paul Burton <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Greg Kroah-Hartman <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/18559/
2018-02-15Add delay-init quirk for Corsair K70 RGB keyboardsJack Stocker1-0/+3
Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by: Jack Stocker <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xtensa: fix high memory/reserved memory collisionMax Filippov1-7/+63
Xtensa memory initialization code frees high memory pages without checking whether they are in the reserved memory regions or not. That results in invalid value of totalram_pages and duplicate page usage by CMA and highmem. It produces a bunch of BUGs at startup looking like this: BUG: Bad page state in process swapper pfn:70800 page:be60c000 count:0 mapcount:-127 mapping: (null) index:0x1 flags: 0x80000000() raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a page dumped because: nonzero mapcount Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G B 4.16.0-rc1-00015-g7928b2cbe55b-dirty #23 Stack: bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000 a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000 a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e Call Trace: [<a1065734>] bad_page+0xac/0xd0 [<a106578c>] free_pages_check_bad+0x34/0x4c [<a1066166>] __free_pages_ok+0xae/0x14c [<a1066b58>] __free_pages+0x30/0x64 [<a1365de5>] init_cma_reserved_pageblock+0x35/0x44 [<a13682dc>] cma_init_reserved_areas+0xf4/0x148 [<a10034b8>] do_one_initcall+0x80/0xf8 [<a1361c16>] kernel_init_freeable+0xda/0x13c [<a125b59d>] kernel_init+0x9/0xd0 [<a1004304>] ret_from_kernel_thread+0xc/0x18 Only free high memory pages that are not reserved. Cc: [email protected] Signed-off-by: Max Filippov <[email protected]>
2018-02-15usb: ohci: Proper handling of ed_rm_list to handle race condition between ↵AMAN DEEP1-7/+10
usb_kill_urb() and finish_unlinks() There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by: Alan Stern <[email protected]> CC: <[email protected]> Signed-off-by: Aman Deep <[email protected]> Signed-off-by: Jeffy Chen <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15usb: host: ehci: always enable interrupt for qtd completion at test modePeter Chen1-8/+4
At former code, the SETUP stage does not enable interrupt for qtd completion, it relies on IAA watchdog to complete interrupt, then the transcation would be considered timeout if the flag need_io_watchdog is cleared by platform code. In this commit, we always add enable interrupt for qtd completion, then the qtd completion can be notified by hardware interrupt. Signed-off-by: Peter Chen <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15usb: ldusb: add PIDs for new CASSY devices supported by this driverKarsten Koop3-0/+12
This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by: Karsten Koop <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx pathYoshihiro Shimoda1-0/+5
This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <[email protected]> # v3.19+ Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15usb: host: ehci: use correct device pointer for dma opsPeter Chen1-2/+2
commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by: Peter Chen <[email protected]> Acked-by: Alan Stern <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15usbip: keep usbip_device sockfd state in sync with tcp_socketShuah Khan2-0/+5
Keep usbip_device sockfd state in sync with tcp_socket. When tcp_socket is reset to null, reset sockfd to -1 to keep it in sync. Signed-off-by: Shuah Khan <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func()Shigeru Yoshida2-4/+10
Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by: Shigeru Yoshida <[email protected]> Signed-off-by: Haiqing Bai <[email protected]> Acked-by: Alan Stern <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15USB: serial: option: Add support for Quectel EP06Kristian Evensen1-0/+7
The Quectel EP06 is a Cat. 6 LTE modem, and the interface mapping is as follows: 0: Diag 1: NMEA 2: AT 3: Modem Interface 4 is QMI and interface 5 is ADB, so they are blacklisted. This patch should also be considered for -stable. The QMI-patch for this modem is already in the -stable-queue. v1->v2: * Updated commit prefix (thanks Johan Hovold) * Updated commit message slightly. Signed-off-by: Kristian Evensen <[email protected]> Acked-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: fix xhci debugfs errors in xhci_stopZhengjun Xing1-2/+1
In function xhci_stop, xhci_debugfs_exit called before xhci_mem_cleanup. xhci_debugfs_exit removed the xhci debugfs root nodes, xhci_mem_cleanup called function xhci_free_virt_devices_depth_first which in turn called function xhci_debugfs_remove_slot. Function xhci_debugfs_remove_slot removed the nodes for devices, the nodes folders are sub folder of xhci debugfs. It is unreasonable to remove xhci debugfs root folder before xhci debugfs sub folder. Function xhci_mem_cleanup should be called before function xhci_debugfs_exit. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <[email protected]> # v4.15 Signed-off-by: Zhengjun Xing <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: xhci debugfs device nodes weren't removed after device plugged outZhengjun Xing1-4/+2
There is a bug after plugged out USB device, the device and its ep00 nodes are still kept, we need to remove the nodes in xhci_free_dev when USB device is plugged out. Fixes: 052f71e25a7e ("xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate") Cc: <[email protected]> # v4.15 Signed-off-by: Zhengjun Xing <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: Fix xhci debugfs devices node disappearance after hibernationZhengjun Xing1-0/+1
During system resume from hibernation, xhci host is reset, all the nodes in devices folder are removed in xhci_mem_cleanup function. Later nodes in /sys/kernel/debug/usb/xhci/* are created again in function xhci_run, but the nodes already exist, so the nodes still keep the old ones, finally device nodes in xhci debugfs folder /sys/kernel/debug/usb/xhci/*/devices/* are disappeared. This fix removed xhci debugfs nodes before the nodes are re-created, so all the nodes in xhci debugfs can be re-created successfully. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: <[email protected]> # v4.15 Signed-off-by: Zhengjun Xing <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: Fix NULL pointer in xhci debugfsZhengjun Xing1-2/+2
Commit dde634057da7 ("xhci: Fix use-after-free in xhci debugfs") causes a null pointer dereference while fixing xhci-debugfs usage of ring pointers that were freed during hibernate. The fix passed addresses to ring pointers instead, but forgot to do this change for the xhci_ring_trb_show function. The address of the ring pointer passed to xhci-debugfs was of a temporary ring pointer "new_ring" instead of the actual ring "ring" pointer. The temporary new_ring pointer will be set to NULL later causing the NULL pointer dereference. This issue was seen when reading xhci related files in debugfs: cat /sys/kernel/debug/usb/xhci/*/devices/*/ep*/trbs [ 184.604861] BUG: unable to handle kernel NULL pointer dereference at (null) [ 184.613776] IP: xhci_ring_trb_show+0x3a/0x890 [ 184.618733] PGD 264193067 P4D 264193067 PUD 263238067 PMD 0 [ 184.625184] Oops: 0000 [#1] SMP [ 184.726410] RIP: 0010:xhci_ring_trb_show+0x3a/0x890 [ 184.731944] RSP: 0018:ffffba8243c0fd90 EFLAGS: 00010246 [ 184.737880] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000000295d6 [ 184.746020] RDX: 00000000000295d5 RSI: 0000000000000001 RDI: ffff971a6418d400 [ 184.754121] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 184.762222] R10: ffff971a64c98a80 R11: ffff971a62a00e40 R12: ffff971a62a85500 [ 184.770325] R13: 0000000000020000 R14: ffff971a6418d400 R15: ffff971a6418d400 [ 184.778448] FS: 00007fe725a79700(0000) GS:ffff971a6ec00000(0000) knlGS:0000000000000000 [ 184.787644] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.794168] CR2: 0000000000000000 CR3: 000000025f365005 CR4: 00000000003606f0 [ 184.802318] Call Trace: [ 184.805094] ? seq_read+0x281/0x3b0 [ 184.809068] seq_read+0xeb/0x3b0 [ 184.812735] full_proxy_read+0x4d/0x70 [ 184.817007] __vfs_read+0x23/0x120 [ 184.820870] vfs_read+0x91/0x130 [ 184.824538] SyS_read+0x42/0x90 [ 184.828106] entry_SYSCALL_64_fastpath+0x1a/0x7d Fixes: dde634057da7 ("xhci: Fix use-after-free in xhci debugfs") Cc: <[email protected]> # v4.15 Signed-off-by: Zhengjun Xing <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: Don't print a warning when setting link state for disabled portsMathias Nyman1-9/+9
When disabling a USB3 port the hub driver will set the port link state to U3 to prevent "ejected" or "safely removed" devices that are still physically connected from immediately re-enumerating. If the device was really unplugged, then error messages were printed as the hub tries to set the U3 link state for a port that is no longer enabled. xhci-hcd ee000000.usb: Cannot set link state. usb usb8-port1: cannot disable (err = -32) Don't print error message in xhci-hub if hub tries to set port link state for a disabled port. Return -ENODEV instead which also silences hub driver. Signed-off-by: Mathias Nyman <[email protected]> Tested-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15xhci: workaround for AMD Promontory disabled ports wakeupJoe Lee5-1/+133
For AMD Promontory xHCI host, although you can disable USB ports in BIOS settings, those ports will be enabled anyway after you remove a device on that port and re-plug it in again. It's a known limitation of the chip. As a workaround we can clear the PORT_WAKE_BITS. [commit and code comment rephrasing -Mathias] Signed-off-by: Joe Lee <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-15Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds5-16/+84
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Misc fixes: - fix rq->lock lockdep annotation bug - fix/improve update_curr_rt() and update_curr_dl() accounting - update documentation - remove unused macro" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cpufreq: Remove unused SUGOV_KTHREAD_PRIORITY macro sched/core: Fix DEBUG_SPINLOCK annotation for rq->lock sched/rt: Make update_curr_rt() more accurate sched/deadline: Make update_curr_dl() more accurate membarrier-sync-core: Document architecture support
2018-02-15Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds5-41/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "This contains two qspinlock fixes and three documentation and comment fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/semaphore: Update the file path in documentation locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit() locking/qspinlock: Ensure node->count is updated before initialising node locking/qspinlock: Ensure node is initialised before updating prev->next Documentation/locking/mutex-design: Update to reflect latest changes
2018-02-15block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTSMinwoo Im1-1/+1
Update comment typo _consisitent_ to _consistent_ from following commit. commit 0206319fdfee ("blk-mq: Fix poll_stat for new size-based bucketing.") Cc: Jens Axboe <[email protected]> Signed-off-by: Minwoo Im <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-15usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during ↵Roger Quadros2-11/+41
suspend/resume In order for ULPI PHYs to work, dwc3_phy_setup() and dwc3_ulpi_init() must be doene before dwc3_core_get_phy(). commit 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") broke this. The other issue is that dwc3_core_get_phy() and dwc3_ulpi_init() should be called only once during the life cycle of the driver. However, as dwc3_core_init() is called during system suspend/resume it will result in multiple calls to dwc3_core_get_phy() and dwc3_ulpi_init() which is wrong. Fix this by moving dwc3_ulpi_init() out of dwc3_phy_setup() into dwc3_core_ulpi_init(). Use a flag 'ulpi_ready' to ensure that dwc3_core_ulpi_init() is called only once from dwc3_core_init(). Use another flag 'phys_ready' to call dwc3_core_get_phy() only once from dwc3_core_init(). Fixes: 541768b08a40 ("usb: dwc3: core: Call dwc3_core_get_phy() before initializing phys") Fixes: f54edb539c11 ("usb: dwc3: core: initialize ULPI before trying to get the PHY") Cc: linux-stable <[email protected]> # >= v4.13 Signed-off-by: Roger Quadros <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-02-15USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe()Wei Yongjun1-0/+1
Add the missing platform_device_put() before return from bdc_pci_probe() in the platform_device_add_resources() error handling case. Fixes: efed421a94e6 ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Felipe Balbi <[email protected]>
2018-02-15Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h"Hendrik Brueckner2-413/+0
This reverts commit f120c7b187e6c418238710b48723ce141f467543 which is no longer required with the introduction of a syscall.tbl on s390. Signed-off-by: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Thomas Richter <[email protected]> Cc: [email protected] LPU-Reference: [email protected] Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf s390: Rework system call table creation by using syscall.tblHendrik Brueckner2-14/+14
Recently, s390 uses a syscall.tbl input file to generate its system call table and unistd uapi header files. Hence, update mksyscalltbl to use it as input to create the system table for perf. Signed-off-by: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Thomas Richter <[email protected]> Cc: [email protected] LPU-Reference: [email protected] Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tblHendrik Brueckner1-0/+390
Grab a copy of the s390 system call table file introduced with commit 857f46bfb07f53dc112d69bdfb137cc5ec3da7c5 "s390/syscalls: add system call table". Signed-off-by: Hendrik Brueckner <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Thomas Richter <[email protected]> Cc: [email protected] LPU-Reference: [email protected] Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15tools/headers: Synchronize kernel ABI headers, v4.16-rc1Ingo Molnar5-0/+171
Sync the following tooling headers with the latest kernel version: tools/arch/powerpc/include/uapi/asm/kvm.h tools/arch/x86/include/asm/cpufeatures.h tools/include/uapi/drm/i915_drm.h tools/include/uapi/linux/if_link.h tools/include/uapi/linux/kvm.h All the changes are new ABI additions which don't impact their use in existing tooling. Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Stephen Rothwell <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15perf test: Fix test trace+probe_libc_inet_pton.sh for s390xThomas Richter1-5/+18
On Intel test case trace+probe_libc_inet_pton.sh succeeds and the output is: [root@f27 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/max-stack=3/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms 0.000 probe_libc:inet_pton:(7fa40ac618a0)) __GI___inet_pton (/usr/lib64/libc-2.26.so) getaddrinfo (/usr/lib64/libc-2.26.so) main (/usr/bin/ping) The kernel stack unwinder is used, it is specified implicitly as call-graph=fp (frame pointer). On s390x only dwarf is available for stack unwinding. It is also done in user space. This requires different parameter setup and result checking for s390x and Intel. This patch adds separate perf trace setup and result checking for Intel and s390x. On s390x specify this command line to get a call-graph and handle the different call graph result checking: [root@s35lp76 perf]# ./perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.041 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.041/0.041/0.041/0.000 ms 0.000 probe_libc:inet_pton:(3ffb9942060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) [root@s35lp76 perf]# Before: [root@s8360047 perf]# ./perf test -vv 58 58: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 26349 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.079 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.079/0.079/0.079/0.000 ms 0.000 probe_libc:inet_pton:(3ff925c2060)) test child finished with -1 ---- end ---- probe libc's inet_pton & backtrace it with ping: FAILED! [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf test -vv 57 57: probe libc's inet_pton & backtrace it with ping : --- start --- test child forked, pid 38708 PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.038 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.038/0.038/0.038/0.000 ms 0.000 probe_libc:inet_pton:(3ff87342060)) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) test child finished with 0 ---- end ---- probe libc's inet_pton & backtrace it with ping: Ok [root@s35lp76 perf]# On Intel the test case runs unchanged and succeeds. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf data: Document missing --force optionSangwon Hong1-0/+4
Add the --force option to the man page. Signed-off-by: Sangwon Hong <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Taeung Song <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf tools: Substitute yet another strtoull()Andy Shevchenko1-22/+2
Instead of home grown function let's use what library provides us. Signed-off-by: Andriy Shevchenko <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf top: Check the latency of perf_top__mmap_read()Kan Liang1-0/+9
The latency of perf_top__mmap_read() should be lower than refresh time. If not, give some hints to reduce the latency. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf top: Switch default mode to overwrite modeKan Liang1-9/+25
perf_top__mmap_read() has a severe performance issue in the Knights Landing/Mill platform, when monitoring heavy load systems. It costs several minutes to finish, which is unacceptable. Currently, 'perf top' uses the non overwrite mode. For non overwrite mode, it tries to read everything in the ringbuffer and doesn't pause it. Once there are lots of samples delivered persistently, the processing time could be very long. Also, the latest samples could be lost when the ringbuffer is full. For overwrite mode, it takes a snapshot for the system by pausing the ringbuffer, which could significantly reduce the processing time. Also, the overwrite mode always keep the latest samples. Considering the real time requirement for 'perf top', the overwrite mode is more suitable for it. Actually, 'perf top' was overwrite mode. It is changed to non overwrite mode since commit 93fc64f14472 ("perf top: Switch to non overwrite mode"). It's better to change it back to overwrite mode by default. For the kernel which doesn't support overwrite mode, it will fall back to non overwrite mode. There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and can be tolerated. For overwrite mode, unconditionally wait 100 ms before each snapshot. It also reduces the overhead caused by pausing ringbuffer, especially on light load system. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf top: Remove lost events checkingKan Liang1-3/+5
There would be some records lost in overwrite mode because of pausing the ringbuffer. It has little impact for the accuracy of the snapshot and could be tolerated by 'perf top'. Remove the lost events checking. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-02-15perf hists browser: Add parameter to disable lost event warningKan Liang6-20/+36
For overwrite mode, the ringbuffer will be paused. The event lost is expected. It needs a way to notify the browser not print the warning. It will be used later for perf top to disable lost event warning in overwrite mode. There is no behavior change for now. Signed-off-by: Kan Liang <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Jin Yao <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.