aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-11-07Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds24-31/+142
Pull MIPS updates from Ralf Baechle: "This weeks' round of MIPS bug fixes for 3.18: - wire up the bpf syscall - fix TLB dump output for R3000 class TLBs - fix strnlen_user return value if no NUL character was found. - fix build with binutils 2.24.51+. While there is no binutils 2.25 release yet, toolchains derived from binutils 2.24.51+ are already in common use. - the Octeon GPIO code forgot to offline GPIO IRQs. - fix build error for XLP. - fix possible BUG assertion with EVA for CMA" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix build with binutils 2.24.51+ MIPS: R3000: Fix debug output for Virtual page number MIPS: Fix strnlen_user() return value in case of overlong strings. MIPS: CMA: Do not reserve memory if not required MIPS: Wire up bpf syscall. MIPS/Xlp: Remove the dead function destroy_irq() to fix build error MIPS: Octeon: Make Octeon GPIO IRQ chip CPU hotplug-aware
2014-11-08PM / Domains: Change prototype for the attach and detach callbacksUlf Hansson2-4/+6
Convert the prototypes to return an int in order to support error handling in these callbacks. Also, as suggested by Dmitry Torokhov, pass the domain pointer for use inside the callbacks, and so that they match the existing power_on/power_off callbacks which currently take the domain pointer. Acked-by: Dmitry Torokhov <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> [ khilman: added domain as parameter to callbacks, as suggested by Dmitry ] Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2014-11-08cpufreq: Avoid crash in resume on SMP without OPPGeert Uytterhoeven1-1/+2
When resuming from s2ram on an SMP system without cpufreq operating points (e.g. there's no "operating-points" property for the CPU node in DT, or the platform doesn't use DT yet), the kernel crashes when bringing CPU 1 online: Enabling non-boot CPUs ... CPU1: Booted secondary processor Unable to handle kernel NULL pointer dereference at virtual address 0000003c pgd = ee5e6b00 [0000003c] *pgd=6e579003, *pmd=6e588003, *pte=00000000 Internal error: Oops: a07 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1246 Comm: s2ram Tainted: G W 3.18.0-rc3-koelsch-01614-g0377af242bb175c8-dirty #589 task: eeec5240 ti: ee704000 task.ti: ee704000 PC is at __cpufreq_add_dev.isra.24+0x24c/0x77c LR is at __cpufreq_add_dev.isra.24+0x244/0x77c pc : [<c0298efc>] lr : [<c0298ef4>] psr: 60000153 sp : ee705d48 ip : ee705d48 fp : ee705d84 r10: c04e0450 r9 : 00000000 r8 : 00000001 r7 : c05426a8 r6 : 00000001 r5 : 00000001 r4 : 00000000 r3 : 00000000 r2 : 00000000 r1 : 20000153 r0 : c0542734 Verify that policy is not NULL before dereferencing it to fix this. Signed-off-by: Geert Uytterhoeven <[email protected]> Fixes: 8414809c6a1e (cpufreq: Preserve policy structure across suspend/resume) Cc: 3.12+ <[email protected]> # 3.12+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2014-11-07Merge tag 'xfs-for-linus-3.18-rc3' of ↵Linus Torvalds4-199/+145
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs Pull xfs fixes from Dave Chinner: "This update fixes a warning in the new pagecache_isize_extended() and updates some related comments, another fix for zero-range misbehaviour, and an unforntuately large set of fixes for regressions in the bulkstat code. The bulkstat fixes are large but necessary. I wouldn't normally push such a rework for a -rcX update, but right now xfsdump can silently create incomplete dumps on 3.17 and it's possible that even xfsrestore won't notice that the dumps were incomplete. Hence we need to get this update into 3.17-stable kernels ASAP. In more detail, the refactoring work I committed in 3.17 has exposed a major hole in our QA coverage. With both xfsdump (the major user of bulkstat) and xfsrestore silently ignoring missing files in the dump/restore process, incomplete dumps were going unnoticed if they were being triggered. Many of the dump/restore filesets were so small that they didn't evenhave a chance of triggering the loop iteration bugs we introduced in 3.17, so we didn't exercise the code sufficiently, either. We have already taken steps to improve QA coverage in xfstests to avoid this happening again, and I've done a lot of manual verification of dump/restore on very large data sets (tens of millions of inodes) of the past week to verify this patch set results in bulkstat behaving the same way as it does on 3.16. Unfortunately, the fixes are not exactly simple - in tracking down the problem historic API warts were discovered (e.g xfsdump has been working around a 20 year old bug in the bulkstat API for the past 10 years) and so that complicated the process of diagnosing and fixing the problems. i.e. we had to fix bugs in the code as well as discover and re-introduce the userspace visible API bugs that we unwittingly "fixed" in 3.17 that xfsdump relied on to work correctly. Summary: - incorrect warnings about i_mutex locking in pagecache_isize_extended() and updates comments to match expected locking - another zero-range bug fix for stray file size updates - a bunch of fixes for regression in the bulkstat code introduced in 3.17" * tag 'xfs-for-linus-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() xfs: rework zero range to prevent invalid i_size updates mm: Remove false WARN_ON from pagecache_isize_extended() xfs: Check error during inode btree iteration in xfs_bulkstat() xfs: bulkstat doesn't release AGI buffer on error
2014-11-07sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locksAndreas Larsson3-11/+30
Atomicity between xchg and cmpxchg cannot be guaranteed when xchg is implemented with a swap and cmpxchg is implemented with locks. Without this, e.g. mcs_spin_lock and mcs_spin_unlock are broken. Signed-off-by: Andreas Larsson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-07asix: Do full reset during ax88772_bindCharles Keepax1-13/+1
commit 3cc81d85ee01 ("asix: Don't reset PHY on if_up for ASIX 88772") causes the ethernet on Arndale to no longer function. This appears to be because the Arndale ethernet requires a full reset before it will function correctly, however simply reverting the above patch causes problems with ethtool settings getting reset. It seems the problem is that the ethernet is not properly reset during bind, and indeed the code in ax88772_bind that resets the device is a very small subset of the actual ax88772_reset function. This patch uses ax88772_reset in place of the existing reset code in ax88772_bind which removes some code duplication and fixes the ethernet on Arndale. It is still possible that the original patch causes some issues with suspend and resume but that seems like a separate issue and I haven't had a chance to test that yet. Signed-off-by: Charles Keepax <[email protected]> Tested-by: Riku Voipio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-07Merge tag 'regulator-v3.18-rc3' of ↵Linus Torvalds7-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "More changes than I'd like here, most of them for a single bug repeated in a bunch of drivers with data not being initialized correctly, plus a fix to lower the severity of a warning introduced in the last merge window which can legitimately go off so we don't want to alarm users excessively" * tag 'regulator-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: s2mpa01: zero-initialize regulator match table array regulator: max8660: zero-initialize regulator match table array regulator: max77802: zero-initialize regulator match table regulator: max77686: zero-initialize regulator match table regulator: max1586: zero-initialize regulator match table array regulator: max77693: Fix use of uninitialized regulator config regulator: of: Lower the severity of the error with no container
2014-11-07Merge tag 'spi-v3.18-rc3' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi bugfixes from Mark Brown: "A couple of small driver fixes for v3.18, both quite problematic if you hit a use case that's affected" * tag 'spi-v3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: toggle clocks on suspend if not disabled by runtime PM spi: fsl-dspi: Fix CTAR selection
2014-11-07tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMPJohannes Berg1-3/+3
The ENABLE_DEV_COREDUMP option is misleading as it implies that it gets the framework enabled, this isn't true it just allows it to get enabled if a driver needs it. Rename it to ALLOW_DEV_COREDUMP to better capture its semantics. Signed-off-by: Johannes Berg <[email protected]> Reviewed-by: Josh Triplett <[email protected]> Acked-by: Aristeu Rozanski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-07tiny: reverse logic for DISABLE_DEV_COREDUMPAristeu Rozanski1-8/+11
It's desirable for allnconfig and tinyconfig targets to result in the least amount of code possible. DISABLE_DEV_COREDUMP exists as a way to switch off DEV_COREDUMP regardless if any drivers select WANT_DEV_COREDUMP. This patch renames the option to ENABLE_DEV_COREDUMP and setting it to 'n' (as in allnconfig or tinyconfig) will effectively disable device coredump. Cc: Josh Triplett <[email protected]> Reviewed-by: Josh Triplett <[email protected]> Signed-off-by: Aristeu Rozanski <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Acked-by: Johannes Berg <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-07thermal: exynos: use correct offset for TMU_CONTROL register on Exynos5260Bartlomiej Zolnierkiewicz2-2/+0
In exynos5260_tmu_registers tmu_ctrl entry is erroneously assigned twice. The second assignment (to EXYNOS_TMU_REG_CONTROL1 define which represents 0x24 value) overrides the first one (to EXYNOS_TMU_REG_CONTROL define which represents 0x20 value) which results in the wrong (according to the Exynos5260 SoC documentation that I have) offset being used for TMU_CONTROL register. Fix it by removing the wrong assignment and then remove no longer used EXYNOS_TMU_REG_CONTROL1 define. Cc: Naveen Krishna Chatradhi <[email protected]> Cc: Amit Daniel Kachhap <[email protected]> Cc: Lukasz Majewski <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Zhang Rui <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]> Acked-by: Kyungmin Park <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2014-11-07thermal: imx: correct driver load sequence for cpu coolingBai Ping1-0/+4
thermal driver should be regisetered after cpufreq driver has been registered and probed. Doing so is to make sure that thermal driver can get the max cpu cooling states correctly when calling get_property. Signed-off-by: Bai Ping <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2014-11-07platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus streamGiedrius Statkevicius1-0/+44
Add a i8042 filter to hp_accel to remove accelerometer's data with acpi id HPQ6000 from keyboard bus stream. The codes sent by accelerometer are e0 25, e0 26, e0 27 and e0 28. The relevant information is already passed through /dev/freefall so no need to send these undocumented weird signals through the keyboard bus. Also, unclogs `dmesg` because atkbd complained about weird scan codes, saves processing power and disk space. Signed-off-by: Giedrius Statkevičius <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> Reviewed-by: Éric Piel <[email protected]> Signed-off-by: Darren Hart <[email protected]>
2014-11-07i2c: core: Dispose OF IRQ mapping at client removal timeLaurent Pinchart1-0/+3
Clients instantiated from OF get an IRQ mapping created at device registration time. Dispose the mapping when the client is removed. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2014-11-07i2c: at91: don't account as iowaitWolfram Sang1-1/+1
iowait is for blkio [1]. I2C shouldn't use it. [1] https://lkml.org/lkml/2014/11/3/317 Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Ludovic Desroches <[email protected]> Cc: [email protected]
2014-11-07sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().David S. Miller1-0/+4
Otherwise rcu_irq_{enter,exit}() do not happen and we get dumps like: ==================== [ 188.275021] =============================== [ 188.309351] [ INFO: suspicious RCU usage. ] [ 188.343737] 3.18.0-rc3-00068-g20f3963-dirty #54 Not tainted [ 188.394786] ------------------------------- [ 188.429170] include/linux/rcupdate.h:883 rcu_read_lock() used illegally while idle! [ 188.505235] other info that might help us debug this: [ 188.554230] RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 [ 188.637587] RCU used illegally from extended quiescent state! [ 188.690684] 3 locks held by swapper/7/0: [ 188.721932] #0: (&x->wait#11){......}, at: [<0000000000495de8>] complete+0x8/0x60 [ 188.797994] #1: (&p->pi_lock){-.-.-.}, at: [<000000000048510c>] try_to_wake_up+0xc/0x400 [ 188.881343] #2: (rcu_read_lock){......}, at: [<000000000048a910>] select_task_rq_fair+0x90/0xb40 [ 188.973043]stack backtrace: [ 188.993879] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 3.18.0-rc3-00068-g20f3963-dirty #54 [ 189.076187] Call Trace: [ 189.089719] [0000000000499360] lockdep_rcu_suspicious+0xe0/0x100 [ 189.147035] [000000000048a99c] select_task_rq_fair+0x11c/0xb40 [ 189.202253] [00000000004852d8] try_to_wake_up+0x1d8/0x400 [ 189.252258] [000000000048554c] default_wake_function+0xc/0x20 [ 189.306435] [0000000000495554] __wake_up_common+0x34/0x80 [ 189.356448] [00000000004955b4] __wake_up_locked+0x14/0x40 [ 189.406456] [0000000000495e08] complete+0x28/0x60 [ 189.448142] [0000000000636e28] blk_end_sync_rq+0x8/0x20 [ 189.496057] [0000000000639898] __blk_mq_end_request+0x18/0x60 [ 189.550249] [00000000006ee014] scsi_end_request+0x94/0x180 [ 189.601286] [00000000006ee334] scsi_io_completion+0x1d4/0x600 [ 189.655463] [00000000006e51c4] scsi_finish_command+0xc4/0xe0 [ 189.708598] [00000000006ed958] scsi_softirq_done+0x118/0x140 [ 189.761735] [00000000006398ec] __blk_mq_complete_request_remote+0xc/0x20 [ 189.827383] [00000000004c75d0] generic_smp_call_function_single_interrupt+0x150/0x1c0 [ 189.906581] [000000000043e514] smp_call_function_single_client+0x14/0x40 ==================== Based almost entirely upon a patch by Paul E. McKenney. Reported-by: Meelis Roos <[email protected]> Tested-by: Meelis Roos <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-07i2c: remove FSF addressWolfram Sang52-222/+4
We have a central copy of the GPL for that. Some addresses were already outdated. Signed-off-by: Wolfram Sang <[email protected]>
2014-11-07net: fec: fix regression on i.MX28 introduced by rx_copybreak supportLothar Waßmann1-4/+19
commit 1b7bde6d659d ("net: fec: implement rx_copybreak to improve rx performance") introduced a regression for i.MX28. The swap_buffer() function doing the endian conversion of the received data on i.MX28 may access memory beyond the actual packet size in the DMA buffer. fec_enet_copybreak() does not copy those bytes, so that the last bytes of a packet may be filled with invalid data after swapping. This will likely lead to checksum errors on received packets. E.g. when trying to mount an NFS rootfs: UDP: bad checksum. From 192.168.1.225:111 to 192.168.100.73:44662 ulen 36 Do the byte swapping and copying to the new skb in one go if necessary. Signed-off-by: Lothar Waßmann <[email protected]> Tested-by: Fabio Estevam <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-07USB: Update default usb-storage delay_use value in kernel-parameters.txtMark Knibbs1-1/+1
Back in 2010 the default usb-storage delay_use time was reduced from 5 to 1 second (commit a4a47bc03fe520e95e0c4212bf97c86545fb14f9), but kernel-parameters.txt wasn't updated to reflect that. Signed-off-by: Mark Knibbs <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-07sysfs: driver core: Fix glue dir race condition by gdp_mutexYijing Wang1-1/+3
There is a race condition when removing glue directory. It can be reproduced in following test: path 1: Add first child device device_add() get_device_parent() /*find parent from glue_dirs.list*/ list_for_each_entry(k, &dev->class->p->glue_dirs.list, entry) if (k->parent == parent_kobj) { kobj = kobject_get(k); break; } .... class_dir_create_and_add() path2: Remove last child device under glue dir device_del() cleanup_device_parent() cleanup_glue_dir() kobject_put(glue_dir); If path2 has been called cleanup_glue_dir(), but not call kobject_put(glue_dir), the glue dir is still in parent's kset list. Meanwhile, path1 find the glue dir from the glue_dirs.list. Path2 may release glue dir before path1 call kobject_get(). So kernel will report the warning and bug_on. This is a "classic" problem we have of a kref in a list that can be found while the last instance could be removed at the same time. This patch reuse gdp_mutex to fix this race condition. The following calltrace is captured in kernel 3.4, but the latest kernel still has this bug. ----------------------------------------------------- <4>[ 3965.441471] WARNING: at ...include/linux/kref.h:41 kobject_get+0x33/0x40() <4>[ 3965.441474] Hardware name: Romley <4>[ 3965.441475] Modules linked in: isd_iop(O) isd_xda(O)... ... <4>[ 3965.441605] Call Trace: <4>[ 3965.441611] [<ffffffff8103717a>] warn_slowpath_common+0x7a/0xb0 <4>[ 3965.441615] [<ffffffff810371c5>] warn_slowpath_null+0x15/0x20 <4>[ 3965.441618] [<ffffffff81215963>] kobject_get+0x33/0x40 <4>[ 3965.441624] [<ffffffff812d1e45>] get_device_parent.isra.11+0x135/0x1f0 <4>[ 3965.441627] [<ffffffff812d22d4>] device_add+0xd4/0x6d0 <4>[ 3965.441631] [<ffffffff812d0dbc>] ? dev_set_name+0x3c/0x40 .... <2>[ 3965.441912] kernel BUG at ..../fs/sysfs/group.c:65! <4>[ 3965.441915] invalid opcode: 0000 [#1] SMP ... <4>[ 3965.686743] [<ffffffff811a677e>] sysfs_create_group+0xe/0x10 <4>[ 3965.686748] [<ffffffff810cfb04>] blk_trace_init_sysfs+0x14/0x20 <4>[ 3965.686753] [<ffffffff811fcabb>] blk_register_queue+0x3b/0x120 <4>[ 3965.686756] [<ffffffff812030bc>] add_disk+0x1cc/0x490 .... ------------------------------------------------------- Signed-off-by: Yijing Wang <[email protected]> Signed-off-by: Weng Meiling <[email protected]> Cc: <[email protected]> #3.4+ Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-07MIPS: Fix build with binutils 2.24.51+Manuel Lauss14-17/+118
Starting with version 2.24.51.20140728 MIPS binutils complain loudly about mixing soft-float and hard-float object files, leading to this build failure since GCC is invoked with "-msoft-float" on MIPS: {standard input}: Warning: .gnu_attribute 4,3 requires `softfloat' LD arch/mips/alchemy/common/built-in.o mipsel-softfloat-linux-gnu-ld: Warning: arch/mips/alchemy/common/built-in.o uses -msoft-float (set by arch/mips/alchemy/common/prom.o), arch/mips/alchemy/common/sleeper.o uses -mhard-float To fix this, we detect if GAS is new enough to support "-msoft-float" command option, and if it does, we can let GCC pass it to GAS; but then we also need to sprinkle the files which make use of floating point registers with the necessary ".set hardfloat" directives. Signed-off-by: Manuel Lauss <[email protected]> Cc: Linux-MIPS <[email protected]> Cc: Matthew Fortune <[email protected]> Cc: Markos Chandras <[email protected]> Cc: Maciej W. Rozycki <[email protected]> Patchwork: https://patchwork.linux-mips.org/patch/8355/ Signed-off-by: Ralf Baechle <[email protected]>
2014-11-06Merge tag 'master-2014-11-04' of ↵David S. Miller13-36/+58
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== pull request: wireless 2014-11-06 Please pull this batch of fixes intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This contains another small set of fixes for 3.18, these are all over the place and most of the bugs are old, one even dates back to the original mac80211 we merged into the kernel." For the iwlwifi bits, Emmanuel says: "I fix here two issues that are related to the firmware loading flow. A user reported that he couldn't load the driver because the rfkill line was pulled up while we were running the calibrations. This was happening while booting the system: systemd was restoring the "disable wifi settings" and that raised an RFKILL interrupt during the calibration. Our driver didn't handle that properly and this is now fixed." Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <[email protected]>
2014-11-07Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie9-21/+46
into drm-fixes - fix missing crtc unlock in MC setup - set optimal CE ram config - use gart rather than vram for DMA IB tests to avoid coherency issues with HDP - fix a crasher with laptop mode and TDP scripts * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add missing crtc unlock when setting up the MC drm/radeon: use gart for DMA IB tests drm/radeon: make sure mode init is complete in bandwidth_update drm/radeon: set correct CE ram size for CIK
2014-11-06drm/radeon: add missing crtc unlock when setting up the MCAlex Deucher1-0/+1
Need to unlock the crtc after updating the blanking state. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2014-11-06netxen: Fix link event handling.Manish Chopra1-1/+2
o Poll for the link events only if firmware doesn't have capability to notify the driver for the link events. Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06enic: update desc properly in rx_copybreakGovindarajulu Varadarajan1-12/+2
When we reuse the rx buffer, we need to update the desc. If not hardware sees stale value. In the following crash, when mtu is changed, hardware sees old rx buffer value and crashes on skb_put. Fix this by using enic_queue_rq_desc helper function which updates the necessary desc. [ 64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3 [ 64.659965] ------------[ cut here ]------------ [ 64.661322] kernel BUG at net/core/skbuff.c:100! [ 64.662644] invalid opcode: 0000 [#1] PREEMPT SMP [ 64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod [ 64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-10335-g942396b-dirty #273 [ 64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 64.664834] RIP: 0010:[<ffffffff81392cf1>] [<ffffffff81392cf1>] skb_panic+0x61/0x70 [ 64.664834] RSP: 0018:ffff880210603d48 EFLAGS: 00010292 [ 64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000 [ 64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff [ 64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001 [ 64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40 [ 64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001 [ 64.664834] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 64.664834] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0 [ 64.664834] Stack: [ 64.664834] ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000 [ 64.664834] ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d [ 64.664834] 0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332 [ 64.664834] Call Trace: [ 64.664834] <IRQ> [ 64.664834] [ 64.664834] [<ffffffff81392d54>] skb_put+0x54/0x60 [ 64.664834] [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic] [ 64.664834] [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic] [ 64.664834] [<ffffffff813a5499>] net_rx_action+0x139/0x210 [ 64.664834] [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20 [ 64.664834] [<ffffffff8106110e>] __do_softirq+0x14e/0x280 [ 64.664834] [<ffffffff8106152e>] irq_exit+0x8e/0xb0 [ 64.664834] [<ffffffff8100fd21>] do_IRQ+0x61/0x100 [ 64.664834] [<ffffffff814a2bf2>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06enic: handle error condition properly in enic_rq_indicate_bufGovindarajulu Varadarajan1-0/+6
In case of error in rx path, we free the buf->os_buf but we do not make it NULL. In next iteration we use the skb which is already freed. This causes the following crash. [ 886.154772] general protection fault: 0000 [#1] PREEMPT SMP [ 886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common [ 886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-05668-g876bc7f #272 [ 886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 886.155356] RIP: 0010:[<ffffffff81384030>] [<ffffffff81384030>] kfree_skb_list+0x10/0x30 [ 886.155418] RSP: 0018:ffff880210603d48 EFLAGS: 00010206 [ 886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000 [ 886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017 [ 886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001 [ 886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00 [ 886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80 [ 886.155699] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 886.155774] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0 [ 886.155865] Stack: [ 886.155882] 0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00 [ 886.155942] ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf [ 886.156001] ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0 [ 886.156061] Call Trace: [ 886.156080] <IRQ> [ 886.156095] [ 886.156112] [<ffffffff81383f79>] skb_release_data+0xa9/0xc0 [ 886.157656] [<ffffffff81383faf>] skb_release_all+0x1f/0x30 [ 886.159195] [<ffffffff8138406d>] consume_skb+0x1d/0x40 [ 886.160719] [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40 [ 886.162224] [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic] [ 886.163756] [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic] [ 886.164730] [<ffffffff81397e29>] net_rx_action+0x139/0x210 [ 886.164730] [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280 [ 886.164730] [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0 [ 886.164730] [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100 [ 886.164730] [<ffffffff81496832>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06Merge branch 'mlx5-net'David S. Miller2-6/+5
Eli Cohen says: ==================== mlx5_core fixes for 3.18 the following two patches fix races to could lead to kernel panic in some cases. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-11-06net/mlx5_core: Fix race on driver loadEli Cohen1-2/+2
When events arrive at driver load, the event handler gets called even before the spinlock and list are initialized. Fix this by moving the initialization before EQs creation. Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06net/mlx5_core: Fix race in create EQEli Cohen1-4/+3
After the EQ is created, it can possibly generate interrupts and the interrupt handler is referencing eq->dev. It is therefore required to set eq->dev before calling request_irq() so if an event is generated before request_irq() returns, we will have a valid eq->dev field. Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-07xfs: track bulkstat progress by aginoDave Chinner1-37/+34
The bulkstat main loop progress is tracked by the "lastino" variable, which is a full 64 bit inode. However, the loop actually works on agno/agino pairs, and so there's a significant disconnect between the rest of the loop and the main cursor. Convert this to use the agino, and pass the agino into the chunk formatting function and convert it too. This gets rid of the inconsistency in the loop processing, and finally makes it simple for us to skip inodes at any point in the loop simply by incrementing the agino cursor. cc: <[email protected]> # 3.17 Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-07xfs: bulkstat error handling is brokenDave Chinner1-10/+19
The error propagation is a horror - xfs_bulkstat() returns a rval variable which is only set if there are formatter errors. Any sort of btree walk error or corruption will cause the bulkstat walk to terminate but will not pass an error back to userspace. Worse is the fact that formatter errors will also be ignored if any inodes were correctly formatted into the user buffer. Hence bulkstat can fail badly yet still report success to userspace. This causes significant issues with xfsdump not dumping everything in the filesystem yet reporting success. It's not until a restore fails that there is any indication that the dump was bad and tha bulkstat failed. This patch now triggers xfsdump to fail with bulkstat errors rather than silently missing files in the dump. This now causes bulkstat to fail when the lastino cookie does not fall inside an existing inode chunk. The pre-3.17 code tolerated that error by allowing the code to move to the next inode chunk as the agino target is guaranteed to fall into the next btree record. With the fixes up to this point in the series, xfsdump now passes on the troublesome filesystem image that exposes all these bugs. cc: <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]>
2014-11-07xfs: bulkstat main loop logic is a messDave Chinner1-32/+24
There are a bunch of variables tha tare more wildy scoped than they need to be, obfuscated user buffer checks and tortured "next inode" tracking. This all needs cleaning up to expose the real issues that need fixing. cc: <[email protected]> # 3.17 Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-07xfs: bulkstat chunk-formatter has issuesDave Chinner1-34/+24
The loop construct has issues: - clustidx is completely unused, so remove it. - the loop tries to be smart by terminating when the "freecount" tells it that all inodes are free. Just drop it as in most cases we have to scan all inodes in the chunk anyway. - move the "user buffer left" condition check to the only point where we consume space int eh user buffer. - move the initialisation of agino out of the loop, leaving just a simple loop control logic using the clusteridx. Also, double handling of the user buffer variables leads to problems tracking the current state - use the cursor variables directly rather than keeping local copies and then having to update the cursor before returning. cc: <[email protected]> # 3.17 Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-07xfs: bulkstat chunk formatting cursor is brokenDave Chinner2-47/+28
The xfs_bulkstat_agichunk formatting cursor takes buffer values from the main loop and passes them via the structure to the chunk formatter, and the writes the changed values back into the main loop local variables. Unfortunately, this complex dance is full of corner cases that aren't handled correctly. The biggest problem is that it is double handling the information in both the main loop and the chunk formatting function, leading to inconsistent updates and endless loops where progress is not made. To fix this, push the struct xfs_bulkstat_agichunk outwards to be the primary holder of user buffer information. this removes the double handling in the main loop. Also, pass the last inode processed by the chunk formatter as a separate parameter as it purely an output variable and is not related to the user buffer consumption cursor. Finally, the chunk formatting code is not shared by anyone, so make it local to xfs_itable.c. cc: <[email protected]> # 3.17 Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-07xfs: bulkstat btree walk doesn't terminateDave Chinner1-9/+10
The bulkstat code has several different ways of detecting the end of an AG when doing a walk. They are not consistently detected, and the code that checks for the end of AG conditions is not consistently coded. Hence the are conditions where the walk code can get stuck in an endless loop making no progress and not triggering any termination conditions. Convert all the "tmp/i" status return codes from btree operations to a common name (stat) and apply end-of-ag detection to these operations consistently. cc: <[email protected]> # 3.17 Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Brian Foster <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-07mm: Fix comment before truncate_setsize()Jan Kara1-2/+3
XFS doesn't always hold i_mutex when calling truncate_setsize() and it uses a different lock to serialize truncates and writes. So fix the comment before truncate_setsize(). Reported-by: Jan Beulich <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2014-11-06drm/radeon: use gart for DMA IB testsAlex Deucher2-19/+22
Use gart rather than vram to avoid having to deal with the HDP cache. Port of adfed2b0587289013f8143c54913ddfd44ac1fd3 (drm/radeon: use gart memory for DMA ring tests) to the IB tests. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2014-11-06drm/radeon: make sure mode init is complete in bandwidth_updateAlex Deucher7-0/+21
The power management code calls into the display code for certain things. If certain power management sysfs attributes are called before the driver has finished initializing all of the hardware we can run into problems with uninitialized modesetting state. Add a check to make sure modesetting init has completed to the bandwidth update callbacks to fix this. Can be triggered by the tlp and laptop start up scripts depending on the timing. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=83611 https://bugs.freedesktop.org/show_bug.cgi?id=85771 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2014-11-06drm/radeon: set correct CE ram size for CIKJammy Zhou1-2/+2
CE ram size is 32k/0k/0k for GFX/CS0/CS1 with CIK Ported from amdgpu driver. Signed-off-by: Jammy Zhou <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2014-11-06USB: cdc-acm: add quirk for control-line state requestsJohan Hovold2-2/+14
Add new quirk for devices that cannot handle control-line state requests. Note that we currently send these requests to all devices, regardless of whether they claim to support it, but that errors are only logged if support is claimed. Since commit 0943d8ead30e ("USB: cdc-acm: use tty-port dtr_rts"), which only changed the timings for these requests slightly, this has been reported to cause occasional firmware crashes on Simtec Electronics Entropy Key devices after re-enumeration. Enable the quirk for this device. Reported-by: Nix <[email protected]> Tested-by: Nix <[email protected]> Cc: stable <[email protected]> # v3.16 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-06Merge tag 'fixes-for-v3.18-rc4' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v3.18-rc4 A single fix this for dwc2 this time. Because of excessive debugging messages, dwc2 would sometimes fail enumeration. The fix is simple, just converting a dev_info() into dev_dbg(). Signed-off-by: Felipe Balbi <[email protected]>
2014-11-06tty: Fix pty master poll() after slave closes v2Francesco Ruggeri1-2/+7
Commit f95499c3030f ("n_tty: Don't wait for buffer work in read() loop") introduces a race window where a pty master can be signalled that the pty slave was closed before all the data that the slave wrote is delivered. Commit f8747d4a466a ("tty: Fix pty master read() after slave closes") fixed the problem in case of n_tty_read, but the problem still exists for n_tty_poll. This can be seen by running 'for ((i=0; i<100;i++));do ./test.py ;done' where test.py is: import os, select, pty (pid, pty_fd) = pty.fork() if pid == 0: os.write(1, 'This string should be received by parent') else: poller = select.epoll() poller.register( pty_fd, select.EPOLLIN ) ready = poller.poll( 1 * 1000 ) for fd, events in ready: if not events & select.EPOLLIN: print 'missed POLLIN event' else: print os.read(fd, 100) poller.close() The string from the slave is missed several times. This patch takes the same approach as the fix for read and special cases this condition for poll. Tested on 3.16. Signed-off-by: Francesco Ruggeri <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2014-11-06Merge tag 'usb-serial-3.18-rc4' of ↵Greg Kroah-Hartman2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v3.18-rc4 Two fixes of non-atomic allocations in write paths. Signed-off-by: Johan Hovold <[email protected]>
2014-11-06net: dsa: slave: Fix autoneg for phys on switch MDIO busAndrew Lunn1-2/+5
When the ports phys are connected to the switches internal MDIO bus, we need to connect the phy to the slave netdev, otherwise auto-negotiation etc, does not work. Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06net/9p: remove a comment about pref member which doesn't existRyo Munakata1-1/+0
Signed-off-by: Ryo Munakata <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06drivers: net: cpsw: remove cpsw_ale_stop from cpsw_ale_destroyMugunthan V N1-1/+0
when cpsw is build as modulea and simple insert and removal of module creates a deadlock, due to delete timer. the timer is created and destroyed in cpsw_ale_start and cpsw_ale_stop which are from device open and close. root@am437x-evm:~# modprobe -r ti_cpsw [ 158.505333] INFO: trying to register non-static key. [ 158.510623] the code is fine but needs lockdep annotation. [ 158.516448] turning off the locking correctness validator. [ 158.522282] CPU: 0 PID: 1339 Comm: modprobe Not tainted 3.14.23-00445-gd41c88f #44 [ 158.530359] [<c0015380>] (unwind_backtrace) from [<c0012088>] (show_stack+0x10/0x14) [ 158.538603] [<c0012088>] (show_stack) from [<c054ad70>] (dump_stack+0x78/0x94) [ 158.546295] [<c054ad70>] (dump_stack) from [<c0088008>] (__lock_acquire+0x176c/0x1b74) [ 158.554711] [<c0088008>] (__lock_acquire) from [<c0088944>] (lock_acquire+0x9c/0x104) [ 158.563043] [<c0088944>] (lock_acquire) from [<c004e520>] (del_timer_sync+0x44/0xd8) [ 158.571289] [<c004e520>] (del_timer_sync) from [<bf2eac1c>] (cpsw_ale_destroy+0x10/0x3c [ti_cpsw]) [ 158.580821] [<bf2eac1c>] (cpsw_ale_destroy [ti_cpsw]) from [<bf2eb268>] (cpsw_remove+0x30/0xa0 [ti_cpsw]) [ 158.591000] [<bf2eb268>] (cpsw_remove [ti_cpsw]) from [<c035ef44>] (platform_drv_remove+0x18/0x1c) [ 158.600527] [<c035ef44>] (platform_drv_remove) from [<c035d8bc>] (__device_release_driver+0x70/0xc8) [ 158.610236] [<c035d8bc>] (__device_release_driver) from [<c035e0d4>] (driver_detach+0xb4/0xb8) [ 158.619386] [<c035e0d4>] (driver_detach) from [<c035d6e4>] (bus_remove_driver+0x4c/0x90) [ 158.627988] [<c035d6e4>] (bus_remove_driver) from [<c00af2a8>] (SyS_delete_module+0x10c/0x198) [ 158.637144] [<c00af2a8>] (SyS_delete_module) from [<c000e580>] (ret_fast_syscall+0x0/0x48) [ 179.524727] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=2102 jiffies, g=1487, c=1486, q=6) [ 179.535741] INFO: Stall ended before state dump start Signed-off-by: Mugunthan V N <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06net: mv643xx_eth: reclaim TX skbs only when released by the HWKarl Beldan1-8/+10
ATM, txq_reclaim will dequeue and free an skb for each tx desc released by the hw that has TX_LAST_DESC set. However, in case of TSO, each hw desc embedding the last part of a segment has TX_LAST_DESC set, losing the one-to-one 'last skb frag'/'TX_LAST_DESC set' correspondance, which causes data corruption. Fix this by checking TX_ENABLE_INTERRUPT instead of TX_LAST_DESC, and warn when trying to dequeue from an empty txq (which can be symptomatic of releasing skbs prematurely). Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO') Reported-by: Slawomir Gajzner <[email protected]> Reported-by: Julien D'Ascenzio <[email protected]> Signed-off-by: Karl Beldan <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Ezequiel Garcia <[email protected]> Cc: Sebastian Hesselbarth <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-11-06Merge tag 'pci-v3.18-fixes-2' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fix from Bjorn Helgaas: "This fixes an oops when enabling SR-IOV VF devices. The oops is a regression I added by configuring all devices during enumeration. - Don't oops on virtual buses in acpi_pci_get_bridge_handle() (Yinghai Lu)" * tag 'pci-v3.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Don't oops on virtual buses in acpi_pci_get_bridge_handle()
2014-11-06Merge tag 'sound-3.18-rc4' of ↵Linus Torvalds2-36/+95
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This update contains mostly only fixes for Realtek HD-audio codec driver in addition to a long-standing sysfs warning bug fix for USB-audio. One significant fix for Realtek codecs is the update of EAPD init codes. This avoids invalid COEF setups for some codec models and may fix "lost sound" in some cases. The rest are a bit high volume but only new quirks and ALC668-specific COEF tables" * tag 'sound-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Restore default value for ALC668 ALSA: usb-audio: Fix device_del() sysfs warnings at disconnect ALSA: hda - fix mute led problem for three HP laptops ALSA: hda/realtek - Update Initial AMP for EAPD control ALSA: hda - change three SSID quirks to one pin quirk ALSA: hda - Set GPIO 4 low for a few HP machines ALSA: hda - Add ultra dock support for Thinkpad X240.
Powered by cgit, Gruvboxed by Blaster4385.