aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-25drm/amdgpu: open brace '{' following struct go on the same lineRan Sun1-2/+1
ERROR: open brace '{' following struct go on the same line Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/pm: open brace '{' following struct go on the same lineRan Sun1-14/+7
ERROR: open brace '{' following struct go on the same line Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd: open brace '{' following struct go on the same lineRan Sun1-4/+2
Fix the checkpatch error as open brace '{' following struct should go on the same line. Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Unlock on error path in ↵Dan Carpenter1-1/+1
dm_handle_mst_sideband_msg_ready_event() This error path needs to unlock the "aconnector->handle_mst_msg_ready" mutex before returning. Fixes: bb4fa525f327 ("drm/amd/display: Add polling method to handle MST reply packet") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: 3.2.244Aric Cyr1-1/+1
This version brings along following fixes: - Fix underflow issue on 175hz timing - Add interface to modify DMUB panel power options - Remove check for default eDP panel_mode - Add new sequence for 4-lane HBR3 on vendor specific retimers - Update DPG test pattern programming - Correct unit conversion for vstartup - Exit idle optimizations before attempt to access PHY - Refactor recout calculation with a more generic formula - Read down-spread percentage from lut to adjust dprefclk. - Don't apply FIFO resync W/A if rdivider = 0 - Prevent invalid pipe connections - Rearrange dmub_cmd defs order - Add VESA SCR case for default aux backlight - Guard DCN31 PHYD32CLK logic against chip family - Correct grammar mistakes Acked-by: Alex Hung <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Fix underflow issue on 175hz timingLeo Ma1-1/+6
[Why] Screen underflows happen on 175hz timing for 3 plane overlay case. [How] Based on dst y prefetch value clamp to equ or oto for bandwidth calculation. Reviewed-by: Dillon Varone <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Leo Ma <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Add interface to modify DMUB panel power optionsPaul Hsieh2-0/+15
[Why] This option can vary depending on the panel and may be required to be called during sink detection phase before transmitter control. [How] Allow modify the bit depending on the eDP panel connected with a new interface. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Paul Hsieh <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Rearrange dmub_cmd defs orderAnthony Koo1-28/+26
- Rearranged defs order Acked-by: Alex Hung <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Remove check for default eDP panel_modeTaimur Hassan1-25/+24
[Why] DPCD read is skipped first time after driver initialization. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Fix style issues in amdgpu_gem.cSrinivasan Shanmugam1-19/+19
Fixes the following to align to linux coding style: WARNING: braces {} are not necessary for any arm of this statement WARNING: Missing a blank line after declarations ERROR: space prohibited before that close parenthesis ')' WARNING: unnecessary whitespace before a quoted newline WARNING: %LX is non-standard C, use %llX Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Add new sequence for 4-lane HBR3 on vendor specific retimersOvidiu Bunea1-1/+66
[Why] In some vendor specific retimer setups for downstream 4-lane HBR3 configuration, the sink will show severe corruption (horizontal shifting) and intermittent blanking. [How] Add new retimer programming sequence before clock recovery when 4 lanes are active. Reviewed-by: Michael Strauss <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Ovidiu Bunea <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Update DPG test pattern programmingWenjing Liu2-74/+78
[Why] Last ODM slice could be slightly larger than other slice because it can be including the residual. [How] Update DPG pattern programming sequence to use a different width for last odm slice. Reviewed-by: Chris Park <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Correct unit conversion for vstartupReza Amini1-1/+24
[Why] vstartup is calculated to be a large number. It works because it is within vertical blank, but it reduces region of blank that can be used for power gating. [How] Calculation needs to convert micro seconds to number of vertical lines. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Exit idle optimizations before attempt to access PHYLeo Chen1-0/+3
[Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Leo Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Refactor recout calculation with a more generic formulaWenjing Liu4-168/+404
[Why] Current recout calculation has a few assumptions and implementation for MPO + ODM combine calculation is very specific. The equation has too many cases without enough comments to document the detail. [How] The change remove the following assumptions: 1. When MPO is enabled, we only allow ODM Combine 2:1 2. ODM Combine always has even segment width. 3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from its top pipe. The change applies a generic formula with more details in comment to document this solution so it is eaiser to learn and debug later. Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.Martin Tsai2-2/+38
[Why] Panels show corruption with high refresh rate timings when ss is enabled. [How] Read down-spread percentage from lut to adjust dprefclk. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Martin Tsai <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0Alvin Lee1-1/+4
[Description] It is not valid to set the WDIVIDER value to 0, so do not re-write to DISPCLK_WDIVIDER if the current value is 0 (i.e., it is at it's initial value and we have not made any requests to change DISPCLK yet). Reviewed-by: Saaem Rizvi <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Prevent invalid pipe connectionsEthan Bitnun1-3/+34
[Description] - Prevent ODM pipe connections between pipes that are not part of the same plane when adding a plane to context - Re-attach child pipes of ODM slice about to be disconnected to prevent any lost pipes with invalid tops/bottoms - We cannot split if head_pipe is not in ODM. Preventing this avoids creating an invalid context with an invalid pipe. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Ethan Bitnun <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Update ring scheduler info as neededLijo Lazar1-1/+1
Not all rings have scheduler associated. Only update scheduler data for rings with scheduler. It could result in out of bound access as total rings are more than those associated with particular IPs. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Enabling FW workaround through shared memory for VCN4_0_2sguttula2-0/+15
This patch will enable VCN FW workaround using DRM KEY INJECT WORKAROUND method, which is helping in fixing the secure playback. Signed-off-by: sguttula <[email protected]> Reviewed-by: Leo Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Add VESA SCR case for default aux backlightIswara Nagulendran1-4/+14
[How & Why] When determining default aux backlight level, read from DPCD address 0x734 for VESA SCR on OLED. Reviewed-by: Felipe Clark <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Iswara Nagulendran <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/radeon: Prefer dev_* variant over printkSrinivasan Shanmugam1-4/+8
Changed from pr_err/info to dev_* variants so that we get better debug info when there are multiple GPUs in the system. Fixes: 09edeb4c1680 ("drm/radeon: Prefer pr_err/_info over printk") Suggested-by: Alex Deucher <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/radeon: Fix style issues in radeon _encoders.c & _gart.cSrinivasan Shanmugam2-29/+30
Conform to Linux kernel coding style. Fixes the following & other checks in radeon_encoders.c & radeon_gart.c: WARNING: Missing a blank line after declarations WARNING: Block comments use * on subsequent lines WARNING: Prefer 'unsigned int' to bare use of 'unsigned' WARNING: braces {} are not necessary for single statement blocks Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/amdgpu: Fix warnings in amdgpu/amdgpu_display.cSrinivasan Shanmugam1-17/+25
Fixes the below checkpatch.pl warnings: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line WARNING: suspect code indent for conditional statements (8, 12) WARNING: braces {} are not necessary for single statement blocks Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/radeon: Avoid externs & do not initialize globals to 0 in radeon_drv.cSrinivasan Shanmugam2-37/+27
Fixes the following: - WARNING: externs should be avoided in .c files - ERROR: do not initialise globals to 0 - WARNING: Missing a blank line after declarations Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Guard DCN31 PHYD32CLK logic against chip familyGeorge Shen1-1/+2
[Why] Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other ASICs. [How] Add guard to check chip family is yellow carp before applying logic. Reviewed-by: Hansen Dsouza <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/display: Correct grammar mistakesReza Amini1-9/+11
[Why] There are grammer mistakes in comments [How] Correct grammar mistakes Reviewed-by: Anthony Koo <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Reza Amini <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Return -ENOMEM when there is no memory in 'amdgpu_gfx_mqd_sw_init'Srinivasan Shanmugam1-3/+8
Return -ENOMEM, when there is no sufficient dynamically allocated memory to create MQD backup for ring Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Fix do not add new typedefs in amdgpu_fw_attestation.cSrinivasan Shanmugam1-20/+18
Fixes the following to align to coding style: WARNING: do not add new typedefs +typedef struct FW_ATT_DB_HEADER WARNING: do not add new typedefs +typedef struct FW_ATT_RECORD WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'. + S_IRUSR, ERROR: "(foo*)" should be "(foo *)" WARNING: please, no space before tabs Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: Prefer #if IS_ENABLED over #if defined in amdgpu_drv.cSrinivasan Shanmugam1-2/+2
Adhere to linux coding style Fixes the following: WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE +#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE) WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE +#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE) Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdkfd: enable cooperative groups for gfx11Jonathan Kim9-13/+27
MES can concurrently schedule queues on the device that require exclusive device access if marked exclusively_scheduled without the requirement of GWS. Similar to the F32 HWS, MES will manage quality of service for these queues. Use this for cooperative groups since cooperative groups are device occupancy limited. Since some GFX11 devices can only be debugged with partial CUs, do not allow the debugging of cooperative groups on these devices as the CU occupancy limit will change on attach. In addition, zero initialize the MES add queue submission vector for MES initialization tests as we do not want these to be cooperative dispatches. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amdgpu: set sw state to gfxoff after SR-IOV resetHorace Chen3-0/+14
[Why] Current SR-IOV will not set GC to off state, while it is a real GC hard reset. Whthout GFX off flag, driver may do gfxhub invalidation before firmware load and gfxhub gart enable. This operation may cause CP to become busy because GC is not in the right state for invalidation. [How] Add a function for SR-IOV to clean up some sw state before recover. Set adev->gfx.is_poweron to false to prevent gfxhub invalidation before gfx firmware autoload complete. Signed-off-by: Horace Chen <[email protected]> Reviewed-by: HaiJun Chang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr ClockJane Jian1-1/+1
Report current GFX clock also from average clock value as the original CurrClock data is not valid/accurate any more as per FW team Signed-off-by: Jane Jian <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-25drm/i915: Replace i915->gt0 with to_gt(i915)Andi Shyti5-8/+8
Quite surprised to see that around i915 there are still i915->gt0 references. Replace them with the to_gt() helper. Signed-off-by: Andi Shyti <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-25drm/i915: Simplify expression &to_i915(dev)->drmUwe Kleine-König3-8/+6
to_i915 is defined as container_of(dev, struct drm_i915_private, drm); So for a struct drm_device *dev, to_i915(dev)->drm is just dev. Simplify accordingly. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/panel: ld9040: add backlight Kconfig dependencyArnd Bergmann1-0/+1
The driver now uses the backlight interface, which breaks when that is disabled: ld.lld: error: undefined symbol: devm_backlight_device_register Enforce the necessary Kconfig dependency to avoid this. Fixes: c2268daa65fb ("drm/panel: ld9040: Register a backlight device") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Paul Cercueil <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24fbdev: Harmonize some comments in <linux/fb.h>Thomas Zimmermann1-10/+2
Make the comments for I/O, system and DMA memory say the same. Makes the header file's structure more obvious. Suggested-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24fbdev: Remove FB_DEFAULT_SYS_OPSThomas Zimmermann1-8/+0
Remove the initializer macro FB_DEFAULT_SYS_OPS and its helper macro __FB_DEFAULT_SYS_OPS_MMAP. There are no users. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Helge Deller <[email protected]> (maintainer:FRAMEBUFFER LAYER) Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/omapdrm: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann1-0/+1
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_DEFAULT Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/omapdrm: Use GEM mmap for fbdev emulationThomas Zimmermann2-3/+14
The fbdev emulation currently uses fbdev's default mmap code, which has been written for I/O memory. Provide an mmap that uses GEM's mmap infrastructure. Utilize fine-grained fbdev macros to initialize struct fb_ops. The macros set the read/write and the draw callbacks for DMA memory. Set the fb_mmap callback to omapdrm's new mmap helper. Also select the correct Kconfig token for fbdev's DMA helpers. Note that the DMA helpers are the same as for system memory. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/omapdrm: Set VM flags in GEM-object mmap functionThomas Zimmermann4-38/+8
Use the mmap callback in struct drm_gem_object_funcs to set the VM flags. Replace a number of mmap helpers in omapdrm with their GEM helper counterparts. Generate DRM's file-operations instance with GEM's DEFINE_DRM_GEM_FOPS. The omapdrm driver uses DRM's drm_gem_mmap() helper to prepare the VMA structure. It then modifies the resulting VMA state in its own helper omap_gem_mmap_obj(). The patch improves this by setting up the VMA in the mmap callback in drm_gem_object_funcs, which is called from within drm_gem_mmap(). Omapdrm's omap_gem_mmap() and omap_gem_mmap() can then be removed from the driver. A call to drm_gem_mmap() is sufficient for the mmap operation. Finally, with the omap functions gone, the drivers file_ops in omapdriver_fops can be generated with DEFINE_DRM_GEM_FOPS, which sets DRM's default helpers. v2: * detailed commit message (Javier) * do not set VM_PFNMAP Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Tomi Valkeinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/exynos: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann1-0/+1
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_FLAG_DEFAULT Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by : Inki Dae <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Inki Dae <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Alim Akhtar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/exynos: Use fbdev DMA helpersThomas Zimmermann2-3/+3
Use fbdev's DMA helpers for fbdev emulation. The driver previously used the I/O-memory helpers, while allocating DMA-able system memory. This could (in theory) result in bus errors from accessing the memory range. This bug has been present since the exynos driver was first added. v2: * drop the pointless Fixes tag (Javier) * fix typo in commit message Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Inki Dae <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Inki Dae <[email protected]> Cc: Seung-Woo Kim <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Alim Akhtar <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/tegra: Store pointer to vmap'ed framebuffer in screen_bufferThomas Zimmermann1-1/+1
Tegra uses DMA-able memory, which has to be acessed with CPU ops for system-memory. Store the framebuffer's vmap address in struct fb_info.screen_buffer. The currently used field 'screen_base' is for I/O memory. Suggested-by: Thierry Reding <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Mikko Perttunen <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/tegra: Set fbdev FBINFO_VIRTFB flagThomas Zimmermann1-0/+1
Mark the framebuffer with FBINFO_VIRTFB. The framebuffer range is in DMA-able memory and should be accessed with the CPU's regular memory ops. v2: * drop FBINFO_DEFAULT Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Mikko Perttunen <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/tegra: Use fbdev DMA helpersThomas Zimmermann2-3/+3
Use fbdev's DMA helpers for fbdev emulation. They are equivalent to the previously used system-memory helpers, so no functional changes here. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Mikko Perttunen <[email protected]> Acked-by: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/fbdev-dma: Use fbdev DMA helpersThomas Zimmermann2-3/+3
Use fbdev's DMA helpers for fbdev-dma. They are equivalent to the previously used system-memory helpers, so no functional changes here. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24fbdev: Add fb_ops init macros for framebuffers in DMA-able memoryThomas Zimmermann2-0/+21
Add initializer macros for struct fb_ops for framebuffers in DMA-able memory areas. Also add a corresponding Kconfig token. As of now, this is equivalent to system framebuffers and mostly useful for labeling drivers correctly. A later patch may add a generic DMA-specific mmap operation. Linux offers a number of dma_mmap_*() helpers for different use cases. Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Acked-by: Maxime Ripard <[email protected]> Cc: Helge Deller <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/panel: db7430: remove unused variablesLuca Ceresoli1-4/+0
These variables are never referenced in the code. Signed-off-by: Luca Ceresoli <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-24drm/i915: Fix an error handling path in igt_write_huge()Christophe JAILLET1-2/+4
All error handling paths go to 'out', except this one. Be consistent and also branch to 'out' here. Fixes: c10a652e239e ("drm/i915/selftests: Rework context handling in hugepages selftests") Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7a036b88671312ee9adc01c74ef5b3376f690b76.1689619758.git.christophe.jaillet@wanadoo.fr
Powered by cgit, Gruvboxed by Blaster4385.