aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-29drm/todo: Convert list of fbconv links to footnotesGeert Uytterhoeven1-6/+6
Convert the references to fbconv links to footnotes, so they can be navigated. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/0761f98d3b6f8df9eea977eae063e35b450fda9e.1689779916.git.geert+renesas@glider.be
2023-07-29drm/todo: Add atomic modesetting referencesGeert Uytterhoeven1-3/+7
The section about converting existing KMS drivers to atomic modesetting mentions the existence of a conversion guide, but does not reference it. While the guide is old and rusty, it still contains useful information, so add a link to it. Also link to the LWN.net articles that give an overview about the atomic mode setting design. While at it, remove the reference to unconverted virtual HW drivers, as they've been converted. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/6809d0fda0716892cbccf0ee272481032251026d.1689779916.git.geert+renesas@glider.be
2023-07-29drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()Geert Uytterhoeven1-1/+1
As the temporary buffer is no longer used to store 8-bit grayscale data, its size can be reduced to the size needed to store the monochrome bitmap data. Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-29drm/armada: Fix off-by-one error in armada_overlay_get_property()Geert Uytterhoeven1-2/+4
As ffs() returns one more than the index of the first bit set (zero means no bits set), the color key mode value is shifted one position too much. Fix this by using FIELD_GET() instead. Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
2023-07-29drm: Spelling s/randevouz/rendez-vous/Geert Uytterhoeven1-1/+1
Fix a misspelling of "rendez-vous". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/084bf178dd676a4f07933eb9fcd04d3e30a779ba.1689600209.git.geert+renesas@glider.be
2023-07-29drm: Spelling s/sempahore/semaphore/Geert Uytterhoeven4-4/+4
Fix misspellings of "semaphore". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Hamza Mahfooz <[email protected]> Acked-by: Rodrigo Vivi <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/8b0542c12a2427f34a792c41ac2d2a2922874bfa.1689600102.git.geert+renesas@glider.be
2023-07-29drm/udl: Convert to drm_crtc_helper_atomic_check()Geert Uytterhoeven1-11/+2
Use the drm_crtc_helper_atomic_check() helper instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Reviewed-by: Sui Jingfeng <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/dcb09c0c7bed1baee39a72caba098a399ce7f063.1689599767.git.geert+renesas@glider.be
2023-07-29drm/bridge_connector: Handle drm_connector_init_with_ddc() failuresGeert Uytterhoeven1-2/+9
drm_connector_init_with_ddc() can fail, but the call in drm_bridge_connector_init() does not check that. Fix this by adding the missing error handling. Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Maxime Ripard <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/3a7e9540d8dc94298d021aa2fb046ae8616ca4dd.1689599701.git.geert+renesas@glider.be
2023-07-28drm/nouveau/nvkm/dp: Add workaround to fix DP 1.3+ DPCD issuesLyude Paul1-1/+47
Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of nouveau in order to read the DPCD of a DP connector, which makes sure we do the right thing and also check for extended DPCD caps. However, it turns out we're not currently doing this on the nvkm side since we don't have access to the drm_dp_aux structure there - which means that the DRM side of the driver and the NVKM side can end up with different DPCD capabilities for the same connector. Ideally in order to fix this, we just want to use the drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible though, and is going to depend on having a bunch of the DP code moved out of nvkm and into the DRM side of things as part of the GSP enablement work. Until then however, let's workaround this problem by porting a copy of drm_dp_read_dpcd_caps() into NVKM - which should fix this issue. Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Karol Herbst <[email protected]> Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28gpu: ipu-v3: prg: Convert to devm_platform_ioremap_resource()Yangtao Li1-4/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28gpu: ipu-v3: pre: Convert to devm_platform_ioremap_resource()Yangtao Li1-3/+1
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by: Yangtao Li <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28drm/imx/ipuv3: ipuv3-plane: reuse local variable height in atomic_updatePhilipp Zabel1-6/+5
Use the already existing local variable height = drm_rect_height() >> 16 to replace other occurrences of the same value. Suggested-by: Lucas Stach <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28drm/ast: report connection status on Display Port.Jocelyn Falempe4-14/+66
Aspeed always report the display port as "connected", because it doesn't set a .detect_ctx callback. Fix this by providing the proper detect callback for astdp and dp501. This also fixes the following regression: Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") The default resolution is now 640x480 when no monitor is connected. But Aspeed graphics is mostly used in servers, where no monitor is attached. This also affects the remote BMC resolution to 640x480, which is inconvenient, and breaks the anaconda installer. v2: Add .detect callback to the dp/dp501 connector (Jani Nikula) v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann) Add a BMC virtual connector v4: Better indent detect_ctx() functions (Thomas Zimmermann) v5: Enable polling of the dp and dp501 connector status (Thomas Zimmermann) v6: Change check order in ast_astdp_is_connected (Jammy Huang) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28drm/ast: Add BMC virtual connectorJocelyn Falempe2-0/+61
Most aspeed devices have a BMC, which allows to remotely see the screen. Also in the common use case, those servers don't have a display connected. So add a Virtual connector, to reflect that even if no display is connected, the framebuffer can still be seen remotely. This prepares the work to implement a detect_ctx() for the Display port connector. v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann) remove useless struct field init to 0 (Thomas Zimmermann) don't use drm_simple_encoder_init() (Thomas Zimmermann) inline ast_bmc_connector_init() (Thomas Zimmermann) Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP") Signed-off-by: Jocelyn Falempe <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28drm/imx/dcss: Use dev_err_probeAlexander Stein1-0/+1
This helps identifying problems with downstream pipeline devices, like HDMI/DP output. Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Laurentiu Palcu <[email protected]> Signed-off-by: Laurentiu Palcu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-28drm/panel: simple: Simplify matching using of_device_get_match_data()Geert Uytterhoeven1-9/+6
Both the patform_driver and mipi_dsi_driver structures contain pointers to the match table used, so the custom code to obtain match and match data can be replaced by calls to of_device_get_match_data(). Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Sam Ravnborg <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be
2023-07-28video: logo: LOGO should depend on FB_CORE i.s.o. FBGeert Uytterhoeven2-2/+2
If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can no longer be enabled. Fix this by making CONFIG_LOGO depend on CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the logo code to depend on the presence of real frame buffer device drivers. Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/e4142b7cc9aad9975de1bc6b1c7d86ccee487e4c.1690535997.git.geert+renesas@glider.be
2023-07-28Revert "fbcon: Use kzalloc() in fbcon_prepare_logo()"Geert Uytterhoeven1-1/+1
This reverts commit a6a00d7e8ffd78d1cdb7a43f1278f081038c638f. This commit is redundant, as the root cause that resulted in a false positive was fixed by commit 27f644dc5a77f8d9 ("x86: kmsan: use C versions of memset16/memset32/memset64"). Closes: https://lore.kernel.org/r/CAMuHMdUH4CU9EfoirSxjivg08FDimtstn7hizemzyQzYeq6b6g@mail.gmail.com/ Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/bd8b71bb13af21cc48af40349db440f794336d3a.1690535849.git.geert+renesas@glider.be
2023-07-28drm/gem-fb-helper: Consistenly use drm_dbg_kms()Geert Uytterhoeven1-2/+2
All debug messages in drm_gem_framebuffer_helper.c use drm_dbg_kms(), except for one, which uses drm_dbg(). Replace the outlier by drm_dbg_kms() to restore consistency. Fixes: c91acda3a380 ("drm/gem: Check for valid formats") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/7d56615fbef2d4d0e5f4c4a23f57269bf8bdb71f.1690535176.git.geert+renesas@glider.be
2023-07-28drm/atomic-helper: Update reference to drm_crtc_force_disable_all()Geert Uytterhoeven1-1/+1
drm_crtc_force_disable_all() was renamed to drm_helper_force_disable_all(), but one reference was not updated. Fixes: c2d88e06bcb9 ("drm: Move the legacy kms disable_all helper to crtc helpers") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Sui Jingfeng <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b8c9c1a8a05dbf0be8e8be98cfdeafa9cecd8cef.1690535002.git.geert+renesas@glider.be
2023-07-27drm/vkms: Fix race-condition between the hrtimer and the atomic commitMaíra Canal3-7/+15
Currently, it is possible for the composer to be set as enabled and then as disabled without a proper call for the vkms_vblank_simulate(). This is problematic, because the driver would skip one CRC output, causing CRC tests to fail. Therefore, we need to make sure that, for each time the composer is set as enabled, a composer job is added to the queue. In order to provide this guarantee, add a mutex that will lock before the composer is set as enabled and will unlock only after the composer job is added to the queue. This way, we can have a guarantee that the driver won't skip a CRC entry. This race-condition is affecting the IGT test "writeback-check-output", making the test fail and also, leaking writeback framebuffers, as the writeback job is queued, but it is not signaled. This patch avoids both problems. [v2]: * Create a new mutex and keep the spinlock across the atomic commit in order to avoid interrupts that could result in deadlocks. Signed-off-by: Maíra Canal <[email protected]> Reviewed-by: Arthur Grillo <[email protected]> Signed-off-by: Maíra Canal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-27drm/vkms: Add support to 1D gamma LUTArthur Grillo4-1/+117
Support a 1D gamma LUT with interpolation for each color channel on the VKMS driver. Add a check for the LUT length by creating vkms_atomic_check(). Enable VKMS to run the test igt@kms_plane@pixel-format. Tested with: igt@kms_color@gamma igt@kms_color@legacy-gamma igt@kms_color@invalid-gamma-lut-sizes v2: - Add interpolation between the values of the LUT (Simon Ser) v3: - s/ratio/delta (Pekka) - s/color_channel/channel_value (Pekka) - s/lut_area/lut_channel - Store the `drm_color_lut`, `lut_length`, and `channel_value2index_ratio` inside a struct called `vkms_lut` (Pekka) - Pre-compute some constants values used through the LUT procedure (Pekka) - Change the switch statement to a cast to __u16* (Pekka) - Make the apply_lut_to_channel_value return the computation result (Pekka) v4: - Add a comment explaining that `enum lut_area` depends on the layout of `struct drm_color_lut` (Pekka) - Remove unused variable (kernel test robot) v5: - Mention that this will make it possible to run the test igt@kms_plane@pixel-format (Maíra) - s/had/has (Maíra) Signed-off-by: Arthur Grillo <[email protected]> Acked-by: Pekka Paalanen <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Reviewed-by: Maíra Canal <[email protected]> Signed-off-by: Maíra Canal <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-27drm/i915/selftest/gsc: Ensure GSC Proxy init completes before selftestsAlan Previn4-1/+58
On MTL, if the GSC Proxy init flows haven't completed, submissions to the GSC engine will fail. Those init flows are dependent on the mei's gsc_proxy component that is loaded in parallel with i915 and a worker that could potentially start after i915 driver init is done. That said, all subsytems that access the GSC engine today does check for such init flow completion before using the GSC engine. However, selftests currently don't wait on anything before starting. To fix this, add a waiter function at the start of __run_selftests that waits for gsc-proxy init flows to complete. Selftests shouldn't care if the proxy-init failed as that should be flagged elsewhere. Difference from prior versions: v7: - Change the fw status to INTEL_UC_FIRMWARE_LOAD_FAIL if the proxy-init fails so that intel_gsc_uc_fw_proxy_get_status catches it. (Daniele) v6: - Add a helper that returns something more than a boolean so we selftest can stop waiting if proxy-init hadn't completed but failed (Daniele). v5: - Move the call to __wait_gsc_proxy_completed from common __run_selftests dispatcher to the group-level selftest function (Trvtko). - change the pr_info to pr_warn if we hit the timeout. v4: - Remove generalized waiters function table framework (Tvrtko). - Remove mention of CI-framework-timeout from comments (Tvrtko). v3: - Rebase to latest drm-tip. v2: - Based on internal testing, increase the timeout for gsc-proxy specific case to 8 seconds. Signed-off-by: Alan Previn <[email protected]> Reviewed-by: Daniele Ceraolo Spurio <[email protected]> Signed-off-by: Daniele Ceraolo Spurio <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-07-27drm/radeon: Prefer strscpy over strlcpy calls in radeon_atombios.cSrinivasan Shanmugam1-2/+2
Use the strscpy method instead of strlcpy method. Fixes the below: WARNING: Prefer strscpy over strlcpy Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: correct vmhub index in GMC v10/11Lang Yu2-2/+6
Align with new vmhub definition. v2: use client_id == VMC to decide vmhub(Hawking) Signed-off-by: Lang Yu <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Fix non-standard format specifiers in 'amdgpu_show_fdinfo'Srinivasan Shanmugam1-2/+2
Fixes the following: WARNING: %Lu is non-standard C, use %llu + seq_printf(m, "drm-client-id:\t%Lu\n", vm->immediate.fence_context); WARNING: %Ld is non-standard C, use %lld + seq_printf(m, "drm-engine-%s:\t%Ld ns\n", amdgpu_ip_name[hw_ip], Cc: Guchun Chen <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: set completion status as preempted for the resubmissionJiadong Zhu2-0/+12
The driver's CSA buffer is shared by all the ibs. When the high priority ib is submitted after the preempted ib, CP overrides the ib_completion_status as completed in the csa buffer. After that the preempted ib is resubmitted, CP would clear some locals stored for ib resume when reading the completed status, which causes gpu hang in some cases. Always set status as preempted for those resubmitted ib instead of reading everything from the CSA buffer. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2535 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2717 Signed-off-by: Jiadong Zhu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/radeon: Fix ENOSYS with better fitting error codes in radeon_gem.cSrinivasan Shanmugam1-2/+2
Replace the error code from 'ENOSYS' to 'EOPNOTSUPP' for unimplemented radeon_gem_pread_ioctl & radeon_gem_pwrite_ioctl Fixes the following: WARNING: ENOSYS means 'invalid syscall nr' and nothing else. Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/radeon: Remove unnecessary NULL test before kfree in ↵Srinivasan Shanmugam1-4/+2
'radeon_connector_free_edid' Fixes the below: WARNING: kfree(NULL) is safe and this check is probably not required. Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Use parentheses for sizeof *numa_info in 'amdgpu_acpi_get_numa_info'Srinivasan Shanmugam1-1/+1
Fixes the below: WARNING: sizeof *numa_info should be sizeof(*numa_info) Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/radeon: Prefer strscpy over strlcpy in 'radeon_combios_get_power_modes'Srinivasan Shanmugam1-2/+2
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated. The safe replacement is strscpy() [1]. cleanup to remove the strlcpy() function entirely from the kernel [2]. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Fixes the following: WARNING: Prefer strscpy over strlcpy + strlcpy(info.type, name, sizeof(info.type)); WARNING: Prefer strscpy over strlcpy + strlcpy(info.type, name, sizeof(info.type)); Cc: Guchun Chen <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Fix unnecessary else after return in 'amdgpu_eeprom_xfer'Srinivasan Shanmugam1-20/+19
Fixes the following: WARNING: else is not generally useful after a break or return + return -EINVAL; + } else { Cc: Guchun Chen <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu/discovery: enable PSP 14.0.0 supportLi Ma1-0/+1
Add it to IP discovery. Signed-off-by: Li Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: add PSP 14.0.0 supportLi Ma2-0/+4
Uses same driver interface as 13.0. Signed-off-by: Li Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/radeon: Fix format errorYonggang Wu1-3/+3
Fix the error(s): ERROR: space required before the open parenthesis '(' Signed-off-by: Yonggang Wu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdkfd: fix and enable ttmp setup for gfx11Jonathan Kim6-20/+39
The MES cached process context must be cleared on adding any queue for the first time. For proper debug support, the MES will clear it's cached process context on the first call to SET_SHADER_DEBUGGER. This allows TTMPs to be pesistently enabled in a safe manner. Signed-off-by: Jonathan Kim <[email protected]> Reviewed-by: Eric Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Move externs to amdgpu.h file from amdgpu_drv.cSrinivasan Shanmugam2-16/+12
Fixes the following: WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_vram_mgr_attr_group; WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_gtt_mgr_attr_group; WARNING: externs should be avoided in .c files +extern const struct attribute_group amdgpu_flash_attr_group; And other style fixes: WARNING: Block comments should align the * on each line WARNING: void function return statements are not generally useful WARNING: braces {} are not necessary for single statement blocks Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Prefer dev_* variant over printk in amdgpu_atpx_handler.cSrinivasan Shanmugam1-12/+23
Changed from printk to dev_* variants so that we get better debug info when there are multiple GPUs in the system. Fixes other style issue: ERROR: open brace '{' following function definitions go on the next line WARNING: printk() should include KERN_<LEVEL> facility level Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Fix no new typedefs for enum _AMDGPU_DOORBELL_*Srinivasan Shanmugam1-14/+13
Fixes the following: WARNING: do not add new typedefs Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Fix ENOSYS means 'invalid syscall nr' in amdgpu_device.cSrinivasan Shanmugam2-31/+33
ENOSYS should be used for nonexistent syscalls only, replace ENOSYS with EOPNOTSUPP for reset handlers that are not implemented for respective ASIC. WARNING: ENOSYS means 'invalid syscall nr' and nothing else + if (r == -ENOSYS) WARNING: ENOSYS means 'invalid syscall nr' and nothing else + if (r == -ENOSYS) And other following style fixes in amdgpu_device.c: WARNING: Symbolic permissions 'S_IRUGO' are not preferred. Consider using octal permissions '0444'. WARNING: Block comments should align the * on each line WARNING: Missing a blank line after declarations WARNING: braces {} are not necessary for single statement blocks Cc: Lijo Lazar <[email protected]> Cc: Kent Russell <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Signed-off-by: Srinivasan Shanmugam <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: remove repeat code for mes_add_queue_pktBob Zhou1-4/+0
The setting of mes_add_queue_pkt is repeated, so remove it. Signed-off-by: Bob Zhou <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: Checkpoint and Restore VRAM BOs without VARamesh Errabolu1-2/+6
Extend checkpoint logic to allow inclusion of VRAM BOs that do not have a VA attached Signed-off-by: Ramesh Errabolu <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amdgpu: enable trap of each kfd vmid for gfx v9.4.3Eric Huang1-0/+6
To setup ttmp on as default for gfx v9.4.3 in IP hw init. Signed-off-by: Eric Huang <[email protected]> Reviewed-by: Jonathan Kim <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: open brace '{' following struct go on the same lineRan Sun1-14/+7
ERROR: open brace '{' following struct go on the same line Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: open brace '{' following function definitions go on the next lineRan Sun1-1/+2
ERROR: open brace '{' following function definitions go on the next line Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: that open brace { should be on the previous lineRan Sun1-4/+2
ERROR: that open brace { should be on the previous line Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: Clean up errors in arcturus_ppt.cRan Sun1-3/+3
Fix the following errors reported by checkpatch: ERROR: "foo* bar" should be "foo *bar" ERROR: spaces required around that '=' (ctx:VxW) ERROR: space prohibited before that close parenthesis ')' Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: Clean up errors in arcturus_ppt.cRan Sun1-2/+2
Fix the following errors reported by checkpatch: ERROR: spaces required around that '=' (ctx:VxW) ERROR: spaces required around that '>=' (ctx:WxV) Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: Clean up errors in navi10_ppt.cRan Sun1-12/+13
Fix the following errors reported by checkpatch: ERROR: open brace '{' following function definitions go on the next line ERROR: space required before the open parenthesis '(' ERROR: space required after that ',' (ctx:VxV) ERROR: spaces required around that '=' (ctx:VxW) Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-07-27drm/amd/pm: add missing spaces before '('Ran Sun1-3/+3
ERROR: space required before the open parenthesis '(' Signed-off-by: Ran Sun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.