| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Fix the following errors reported by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: space prohibited before that close parenthesis ')'
ERROR: that open brace { should be on the previous line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: GuoHua Chen <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: spaces required around that '=' (ctx:WxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
sienna_cichlid_ip_offset.h
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
ERROR: space prohibited before that ',' (ctx:WxE)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following enum go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following enum go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited before that ',' (ctx:WxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: need consistent spacing around '-' (ctx:WxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space required before the open parenthesis '('
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: do not initialise globals to 0
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If the RLC firmware is invalid because of wrong header size,
the pointer to the rlc firmware is released in function
amdgpu_ucode_request. There will be a null pointer error
in subsequent use. So skip validation to fix it.
Signed-off-by: Ma Jun <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Move ras capablity check to amdgpu_ras_check_supported.
Driver will query ras capablity through psp interace, or
vbios interface, or specific ip callbacks.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Instead of traditional atomfirmware interfaces for RAS
capability, host driver can query ras capability from
psp starting from psp v13_0_6.
v2: drop redundant local variable from get_ras_capability.
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Tao Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
- Align the returned error code with legacy DP
- Allow Z8 for multiplane configurations on DCN35
- Set default Z8 minimum residency for DCN35
- Rework DC Z10 restore
- Enable Panel Replay for static screen use case
- Add DP audio BW validation
- Fix dml2 assigned pipe search
- Ensure populate uclk in bb construction
- Update P010 scaling cap
- Reenable windowed mpo odm support
- Fix DML2 watermark calculation
- Clear OPTC mem select on disable
- Floor to mhz when requesting dpp disp clock changes to SMU
- Port DENTIST hang and TDR fixes to OTG disable W/A
- Add logging resource checks
- Add Replay IPS register for DMUB command table
- Init link enc resources in dc_state only if res_pool presents
- Allow IPS2 during Replay
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Martin Leung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
For usb4 connector, AUX transaction is handled by dmub utilizing a differnt
code path comparing to legacy DP connector. If the usb4 DP connector is
disconnected, AUX access will report EBUSY and cause igt@kms_dp_aux_dev
fail.
[How]
Align the error code with the one reported by legacy DP as EIO.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Wayne Lin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Power improvement over DCN314, but also addresses a functional issue
where plane_state remains uncleared on pipes that aren't actually
active.
[How]
Update the check to allow for zero streams to be treated as z8 allow.
Update the check to remove plane count on the active stream case.
Z8 will still be blocked based on stutter duration, which is likely to
be the case for most multi plane configurations.
Reviewed-by: Gabe Teeger <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Match DCN314's policy.
Reviewed-by: Gabe Teeger <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
The call currently does two things:
1. Exits DMCUB from idle optimization if it was in
2. Checks DMCUB scratch register to determine if we need to call
DMCUB to do deferred HW restore and then sends the command if it's
ready for it.
By doing (1) we prevent driver idle from being renotified in the cases
where driver had previously allowed DC level idle optimizations via
dc_allow_idle_optimizations since it thinks:
allow == dc->idle_optimizations_allowed
...and that the operation is a no-op.
We want driver idle to be resent at the next opprotunity to do so
for video playback cases.
[How]
Migrate all usecases of dc_z10_restore to only perform (2).
Add extra calls to dc_allow_idle_optimizations to handle (1) and also
keep SW state matching with when we requested enter/exit of DMCUB
idle optimizations.
Ensure cursor idle optimizations false always get called when IPS
is supported.
Further rework/redesign is needed to decide whether we need a separate
level of DM allow vs DC allow and when to attempt re-entry.
Reviewed-by: Yihan Zhu <[email protected]>
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Enable the Panel Replay if eDP panel and ASIC support.
(prioritize Panel Replay over PSR)
[How]
- Setup the Panel Replay config during the device init
(prioritize Panel Replay over PSR).
- Separate the Replay init function into two functions
amdgpu_dm_link_setup_replay() and amdgpu_dm_set_replay_caps()
to fix the issue in the earlier commit that cause PSR and Replay
enabled at the same time.
Reviewed-by: Sun peng Li <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Tom Chung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Timings with small HBlank (such as CVT RBv2) can result in insufficient
HBlank bandwidth for audio SDP transmission when DSC is active. This
will cause some higher bandwidth audio modes to fail.
The combination of CVT RBv2 timings + DSC can commonly be encountered
in MST scenarios.
[How]
Add DP audio bandwidth validation for 8b/10b MST and 128b/132b SST/MST
cases and filter out modes that cannot be supported with the current
timing config.
Reviewed-by: Wenjing Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: George Shen <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
DML2 currently finds assigned pipes in array order rather than the
existing linked list order. This results in rearranging pipe order
on flip and more importantly otg inst and pipe idx mismatch.
This change preserves the order of existing pipes and guarantees
the head pipe will have matching otg inst and pipe idx.
Reviewed-by: Gabe Teeger <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Dmytro Laktyushkin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
- For some SKUs, the optimal DCFCLK for each UCLK is less than the
smallest DCFCLK STA target due to low memory bandwidth. There is
an assumption that the DCFCLK STA targets will always be less
than one of the optimal DCFCLK values, but this is not true for
SKUs that have low memory bandwidth. In this case we need to
populate the optimal UCLK for each DCFCLK STA targets as the max
UCLK freq.
- Also fix a bug in DML where start_state is not assigned and used
correctly.
Reviewed-by: Samson Tam <[email protected]>
Reviewed-by: Chaitanya Dhere <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Keep the same as previous APU and also insert clock dump
Reviewed-by: Ovidiu Bunea <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
core_mode_programming in DML2 should output watermark calculations
to locals, but it incorrectly uses mode_lib
[How]
update code to match HW DML2
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Ovidiu Bunea <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Not clearing the memory select bits prior to OPTC disable can cause DSC
corruption issues when attempting to reuse a memory instance for another
OPTC that enables ODM.
[How]
Clear the memory select bits prior to disabling an OPTC.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Ilya Bakoulin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
SMU uses discrete dpp and disp clock levels. When we submit SMU request
for clock changes in Mhz we need to floor the requested value from Khz so
SMU will choose the next higher clock level in Khz to set. If we ceil to
Mhz, SMU will have to choose the next higher clock level after the ceil,
which could result in unnecessarily jumpping to the next level.
For example, we request 1911,111Khz which is exactly one of the SMU preset
level. If we pass 1912Mhz, SMU will choose 2150,000 khz. If we pass
1911Mhz, SMU will choose 1911,111kHz, which is the expected value.
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Wenjing Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
We can experience DENTIST hangs during optimize_bandwidth or TDRs if
FIFO is toggled and hangs.
[How]
Port the DCN35 fixes to DCN314.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Charlene Liu <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
When mapping resources, resources could be unavailable.
Cc: Mario Limonciello <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: [email protected]
Reviewed-by: Sung joon Kim <[email protected]>
Acked-by: Alex Hung <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: space prohibited before that '++' (ctx:WxB)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
ERROR: trailing statements should be on next line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
spaces required around that '=' (ctx:VxV)
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: "foo* bar" should be "foo *bar"
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the following errors reported by checkpatch:
ERROR: that open brace { should be on the previous line
Signed-off-by: chenxuebing <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|