aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-12wifi: rtw89: use struct to fill H2C command to download beacon framePing-Ke Shih2-113/+46
Download beacon frame via H2C command for AP mode, and then firmware can issues beacon periodically. Originally TIM offset minus fixed 24 bytes of frame header implicitly in macro, and this patch explicitly uses ieee80211_hdrlen() to get header length, but expected to change nothing at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091325.67424-1-pkshih@realtek.com
2024-01-12wifi: rtw89: add new H2C command to pause/sleep transmitting by MAC IDPing-Ke Shih3-6/+40
New H2C command is introduced to pause/sleep transmitting. That extends more bits to support more MAC ID, and currently we still configure 256 MAC ID at most. This new command is always used by coming WiFi 7 chips, and existing chips can use old or new command because firmware still preserves the old one. Add a firmware feature flag to determine which command is adopted according to firmware version. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091315.67358-1-pkshih@realtek.com
2024-01-12wifi: rtw89: refine H2C command that pause transmitting by MAC IDPing-Ke Shih1-7/+10
To reuse this function to support extended H2C command that is used by newer chip, change to use a pointer to fill pause ID and mask. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091307.67296-1-pkshih@realtek.com
2024-01-12wifi: rtw89: fw: use struct to fill BA CAM H2C commandsPing-Ke Shih2-76/+44
The WiFi 6 chips use these commands to create BA CAM entry when RX BA session is established, this BA CAM can record whether packets are received or not, then reply BA for current status. This patch doesn't change logic. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091245.67220-1-pkshih@realtek.com
2024-01-12wifi: rtw89: 8922a: update BA CAM number to 24Ping-Ke Shih2-2/+2
The total BA CAM number of 8922a is 32 instead of 16, and initial 8 entries are dynamic, so update the entry number to 24. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091134.67007-5-pkshih@realtek.com
2024-01-12wifi: rtw89: add chip_ops::h2c_ba_cam() to configure BA CAMPing-Ke Shih9-2/+20
Since chips could use different version of BA CAM H2C command, add a chip_ops to abstract the operation. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091134.67007-4-pkshih@realtek.com
2024-01-12wifi: rtw89: mac: add feature_init to initialize BA CAM V1Ping-Ke Shih3-0/+76
Add a call of feature_init() when bringing interface up. For now, the feature is to reset BA CAM V1 that is only used by upcoming 8922A. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091134.67007-3-pkshih@realtek.com
2024-01-12wifi: rtw89: add firmware H2C command of BA CAM V1Ping-Ke Shih2-0/+94
BA CAM is used to generate BA frame for received AMPDU packets. To support WiFi 7, change format from V0 to have more fields and enlarge entry number for new need. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240108091134.67007-2-pkshih@realtek.com
2024-01-12wifi: wilc1000: fix RCU usage in connect pathAlexis Lothoré1-12/+24
With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com
2024-01-12wifi: wilc1000: fix declarations orderingAlexis Lothoré1-4/+4
Reorder parameters declaration in wilc_parse_join_bss_param to enforce reverse christmas tree Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105075733.36331-2-alexis.lothore@bootlin.com
2024-01-10wifi: b43: Disable QoS for bcm4331Rahul Rameshbabu1-1/+2
bcm4331 seems to not function correctly with QoS support. This may be due to issues with currently available firmware or potentially a device specific issue. When queues that are not of the default "best effort" priority are selected, traffic appears to not transmit out of the hardware while no errors are returned. This behavior is present among all the other priority queues: video, voice, and background. While this can be worked around by setting a kernel parameter, the default behavior is problematic for most users and may be difficult to debug. This patch offers a working out-of-box experience for bcm4331 users. Log of the issue (using ssh low-priority traffic as an example): ssh -T -vvvv git@github.com OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023 debug1: Reading configuration data /etc/ssh/ssh_config debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"' debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'' debug3: command returned status 0 debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"' debug2: match found debug1: /etc/ssh/ssh_config line 9: Applying options for * debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts' debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2' debug2: resolving "github.com" port 22 debug3: resolve_host: lookup github.com:22 debug3: channel_clear_timeouts: clearing debug3: ssh_connect_direct: entering debug1: Connecting to github.com [192.30.255.113] port 22. debug3: set_sock_tos: set socket 3 IP_TOS 0x48 Fixes: e6f5b934fba8 ("b43: Add QOS support") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
2024-01-10wifi: b43: Stop correct queue in DMA worker when QoS is disabledRahul Rameshbabu1-6/+7
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop queue 0 when QoS is disabled to prevent trying to stop a non-existent queue and failing to stop the actual queue instantiated. Fixes: bad691946966 ("b43: avoid packet losses in the dma worker code.") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-4-sergeantsagara@protonmail.com
2024-01-10wifi: b43: Stop/wake correct queue in PIO Tx path when QoS is disabledRahul Rameshbabu1-3/+3
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Fixes: 5100d5ac81b9 ("b43: Add PIO support for PCMCIA devices") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-3-sergeantsagara@protonmail.com
2024-01-10wifi: b43: Stop/wake correct queue in DMA Tx path when QoS is disabledRahul Rameshbabu2-2/+18
When QoS is disabled, the queue priority value will not map to the correct ieee80211 queue since there is only one queue. Stop/wake queue 0 when QoS is disabled to prevent trying to stop/wake a non-existent queue and failing to stop/wake the actual queue instantiated. Log of issue before change (with kernel parameter qos=0): [ +5.112651] ------------[ cut here ]------------ [ +0.000005] WARNING: CPU: 7 PID: 25513 at net/mac80211/util.c:449 __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000067] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000044] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000055] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43(O)] [ +0.000009] CPU: 7 PID: 25513 Comm: irq/17-b43 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] RIP: 0010:__ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000046] Code: 00 45 85 e4 0f 85 9b 00 00 00 48 8d bd 40 09 00 00 f0 48 0f ba ad 48 09 00 00 00 72 0f 5b 5d 41 5c 41 5d 41 5e e9 cb 6d 3c d0 <0f> 0b 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8d b4 16 94 00 00 [ +0.000002] RSP: 0018:ffffc90003c77d60 EFLAGS: 00010097 [ +0.000001] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000001] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff88820b924900 [ +0.000002] RBP: ffff88820b924900 R08: ffffc90003c77d90 R09: 000000000003bfd0 [ +0.000001] R10: ffff88820b924900 R11: ffffc90003c77c68 R12: 0000000000000000 [ +0.000001] R13: 0000000000000000 R14: ffffc90003c77d90 R15: ffffffffc0fa6f40 [ +0.000001] FS: 0000000000000000(0000) GS:ffff88846fb80000(0000) knlGS:0000000000000000 [ +0.000001] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000001] CR2: 00007fafda7ae008 CR3: 000000046d220005 CR4: 00000000000606e0 [ +0.000002] Call Trace: [ +0.000003] <TASK> [ +0.000001] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000044] ? __warn+0x81/0x130 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000045] ? report_bug+0x171/0x1a0 [ +0.000004] ? handle_bug+0x41/0x70 [ +0.000004] ? exc_invalid_op+0x17/0x70 [ +0.000003] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000005] ? __ieee80211_wake_queue+0xd5/0x180 [mac80211] [ +0.000043] ieee80211_wake_queue+0x4a/0x80 [mac80211] [ +0.000044] b43_dma_handle_txstatus+0x29c/0x3a0 [b43] [ +0.000016] ? __pfx_irq_thread_fn+0x10/0x10 [ +0.000002] b43_handle_txstatus+0x61/0x80 [b43] [ +0.000012] b43_interrupt_thread_handler+0x3f9/0x6b0 [b43] [ +0.000011] irq_thread_fn+0x23/0x60 [ +0.000002] irq_thread+0xfe/0x1c0 [ +0.000002] ? __pfx_irq_thread_dtor+0x10/0x10 [ +0.000001] ? __pfx_irq_thread+0x10/0x10 [ +0.000001] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000002] ret_from_fork_asm+0x1b/0x30 [ +0.000004] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- [ +0.000065] ------------[ cut here ]------------ [ +0.000001] WARNING: CPU: 0 PID: 56077 at net/mac80211/util.c:514 __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000077] Modules linked in: b43(O) snd_seq_dummy snd_hrtimer snd_seq snd_seq_device nft_chain_nat xt_MASQUERADE nf_nat xfrm_user xfrm_algo xt_addrtype overlay ccm af_packet amdgpu snd_hda_codec_cirrus snd_hda_codec_generic ledtrig_audio drm_exec amdxcp gpu_sched xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip6t_rpfilter ipt_rpfilter xt_pkttype xt_LOG nf_log_syslog xt_tcpudp nft_compat nf_tables nfnetlink sch_fq_codel btusb uinput iTCO_wdt ctr btrtl intel_pmc_bxt i915 intel_rapl_msr mei_hdcp mei_pxp joydev at24 watchdog btintel atkbd libps2 serio radeon btbcm vivaldi_fmap btmtk intel_rapl_common snd_hda_codec_hdmi bluetooth uvcvideo nls_iso8859_1 applesmc nls_cp437 x86_pkg_temp_thermal snd_hda_intel intel_powerclamp vfat videobuf2_vmalloc coretemp fat snd_intel_dspcfg crc32_pclmul uvc polyval_clmulni snd_intel_sdw_acpi loop videobuf2_memops snd_hda_codec tun drm_suballoc_helper polyval_generic drm_ttm_helper drm_buddy tap ecdh_generic videobuf2_v4l2 gf128mul macvlan ttm ghash_clmulni_intel ecc tg3 [ +0.000073] videodev bridge snd_hda_core rapl crc16 drm_display_helper cec mousedev snd_hwdep evdev intel_cstate bcm5974 hid_appleir videobuf2_common stp mac_hid libphy snd_pcm drm_kms_helper acpi_als mei_me intel_uncore llc mc snd_timer intel_gtt industrialio_triggered_buffer apple_mfi_fastcharge i2c_i801 mei snd lpc_ich agpgart ptp i2c_smbus thunderbolt apple_gmux i2c_algo_bit kfifo_buf video industrialio soundcore pps_core wmi tiny_power_button sbs sbshc button ac cordic bcma mac80211 cfg80211 ssb rfkill libarc4 kvm_intel kvm drm irqbypass fuse backlight firmware_class efi_pstore configfs efivarfs dmi_sysfs ip_tables x_tables autofs4 dm_crypt cbc encrypted_keys trusted asn1_encoder tee tpm rng_core input_leds hid_apple led_class hid_generic usbhid hid sd_mod t10_pi crc64_rocksoft crc64 crc_t10dif crct10dif_generic ahci libahci libata uhci_hcd ehci_pci ehci_hcd crct10dif_pclmul crct10dif_common sha512_ssse3 sha512_generic sha256_ssse3 sha1_ssse3 aesni_intel usbcore scsi_mod libaes crypto_simd cryptd scsi_common [ +0.000084] usb_common rtc_cmos btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_snapshot dm_bufio dm_mod dax [last unloaded: b43] [ +0.000012] CPU: 0 PID: 56077 Comm: kworker/u16:17 Tainted: G W O 6.6.7 #1-NixOS [ +0.000003] Hardware name: Apple Inc. MacBookPro8,3/Mac-942459F5819B171B, BIOS 87.0.0.0.0 06/13/2019 [ +0.000001] Workqueue: phy7 b43_tx_work [b43] [ +0.000019] RIP: 0010:__ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] Code: 74 11 48 8b 78 08 0f b7 d6 89 e9 4c 89 e6 e8 ab f4 00 00 65 ff 0d 9c b7 34 3f 0f 85 55 ff ff ff 0f 1f 44 00 00 e9 4b ff ff ff <0f> 0b 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 [ +0.000002] RSP: 0000:ffffc90004157d50 EFLAGS: 00010097 [ +0.000002] RAX: 0000000000000001 RBX: 0000000000000002 RCX: 0000000000000000 [ +0.000002] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8882d65d0900 [ +0.000002] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000001 [ +0.000001] R10: 00000000000000ff R11: ffff88814d0155a0 R12: ffff8882d65d0900 [ +0.000002] R13: 0000000000000000 R14: ffff8881002d2800 R15: 00000000000000d0 [ +0.000002] FS: 0000000000000000(0000) GS:ffff88846f800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000002] CR2: 00007f2e8c10c880 CR3: 0000000385b66005 CR4: 00000000000606f0 [ +0.000002] Call Trace: [ +0.000001] <TASK> [ +0.000001] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? __warn+0x81/0x130 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000075] ? report_bug+0x171/0x1a0 [ +0.000005] ? handle_bug+0x41/0x70 [ +0.000003] ? exc_invalid_op+0x17/0x70 [ +0.000004] ? asm_exc_invalid_op+0x1a/0x20 [ +0.000004] ? __ieee80211_stop_queue+0xcc/0xe0 [mac80211] [ +0.000076] ieee80211_stop_queue+0x36/0x50 [mac80211] [ +0.000077] b43_dma_tx+0x550/0x780 [b43] [ +0.000023] b43_tx_work+0x90/0x130 [b43] [ +0.000018] process_one_work+0x174/0x340 [ +0.000003] worker_thread+0x27b/0x3a0 [ +0.000004] ? __pfx_worker_thread+0x10/0x10 [ +0.000002] kthread+0xe8/0x120 [ +0.000003] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x34/0x50 [ +0.000002] ? __pfx_kthread+0x10/0x10 [ +0.000003] ret_from_fork_asm+0x1b/0x30 [ +0.000006] </TASK> [ +0.000001] ---[ end trace 0000000000000000 ]--- Fixes: e6f5b934fba8 ("b43: Add QOS support") Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com> Reviewed-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231231050300.122806-2-sergeantsagara@protonmail.com
2024-01-10wifi: rtl8xxxu: Fix off by one initial RTS rateBitterblue Smith1-4/+3
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the next higher rate than the one it should set, e.g. 36M instead of 24M. The while loop was supposed to find the index of the most significant bit which is 1, but it was copied incorrectly from the vendor driver. Use __fls() instead. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/761e6836-6cd6-4930-91b6-0446834655c5@gmail.com
2024-01-10wifi: rtl8xxxu: Fix LED control code of RTL8192FUBitterblue Smith2-9/+38
Some devices, like the Comfast CF-826F, use LED1, which already works. Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly. Write the right values to the LED control registers to make LED0 work as well. This is unfortunately tested only with the Comfast CF-826F. Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
2024-01-10wifi: rtl8xxxu: declare concurrent mode support for 8188fMartin Kaistra3-0/+21
Everything is in place now for concurrent mode, we can tell the system that we support it. We will allow a maximum of 2 virtual interfaces, one of them can be in AP mode. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-22-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: make supporting AP mode only on port 0 transparentMartin Kaistra1-2/+89
When the driver is used for concurrent mode, both virtual interfaces can be set to station or AP mode, though only one can be in AP mode at the same time. In order to keep the code simple, use only hw port 0 for AP mode. When an interface is added in AP mode which would be assigned to port 1, use a switch_port function to transparently swap the mapping between virtual interface and hw port. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-21-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: add hw crypto support for AP modeMartin Kaistra3-10/+44
Add a custom function for allocating entries in the sec cam. This allows us to store multiple keys with the same keyidx. The maximum number of sec cam entries for 8188f is 16 according to the vendor driver. Add the number to rtl8xxxu_fileops, so that other chips which might support more entries, can set a different number there. Set the bssid as mac address for group keys instead of just using the ethernet broadcast address and use BIT(6) in the sec cam ctrl entry for differentiating them from pairwise keys like in the vendor driver. Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx broadcast/multicast packets in AP mode. Finally, allow the usage of rtl8xxxu_set_key() for AP mode. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-20-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: remove obsolete priv->vifMartin Kaistra2-7/+0
Now that all uses of priv->vif have been converted to priv->vifs[] remove the old attribute. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-19-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: add macids for STA modeMartin Kaistra2-1/+18
Until now, the driver only assigned a dedicated macid for connections made in AP mode, in STA mode the return value of rtl8xxxu_get_macid() was simply 0. To differentiate between port 0 and 1, when both are in STA mode, allocate a second macid (with value 1) and set sta_info->macid according to the used port_num in rtl8xxxu_sta_add(). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-18-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interface in start_ap()Martin Kaistra1-1/+2
Call set_bssid() with the correct port_num now. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-17-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in bss_info_changed()Martin Kaistra1-3/+5
Call set_linktype and set_bssid now with correct port_num. Call stop_tx_beacon only for port 0, as we don't support beacons on port 1. Explicit changes to BEACON will only happen for AP type interfaces, so we don't need an additional check there. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-16-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in {add,remove}_interface()Martin Kaistra2-22/+34
Add a custom struct to store in vif->drv_priv with a reference to port_num and fill it when a new interface is added. Choose a free port_num for the newly added interface. As we only want to support AP mode/sending beacons on port 0, only change the beacon settings if a new interface is actually assigned to port 0. Call set_linktype() and set_mac() with the appropriate port_num. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-15-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in watchdog_callback()Martin Kaistra1-8/+11
Check first whether priv->vifs[0] exists and is of type STATION, then go to priv->vifs[1]. Make sure to call refresh_rate_mask for both interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-14-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in configure_filter()Martin Kaistra1-2/+2
As we only want to support AP mode/sending beacons on port 0, change from priv->vif to priv->vifs[0] in the check for AP mode. Additionally, if we are in AP mode, don't filter RX beacon and probe response frames to still allow working STATION mode on the other interface. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-13-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in update_beacon_work_callback()Martin Kaistra1-1/+1
As we only want to support AP mode/sending beacons on port 0, it is enough to replace priv->vif with priv->vifs[0]. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-12-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support multiple interfaces in set_aifs()Martin Kaistra1-2/+8
In concurrent mode supported by this driver, both interfaces will use the same channel and same wireless mode. It is therefore possible to get the wireless mode by checking the first connected interface. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-11-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting bssid register for multiple interfacesMartin Kaistra1-4/+14
To prepare for concurrent mode, enhance rtl8xxxu_set_bssid() to write the BSSID of the respective interface to REG_BSSID or REG_BSSID1. Like done with rtl8xxxu_set_mac(), call rtl8xxxu_set_bssid() with port_num = 0, until the callers also support multiple interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-10-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: don't parse CFO, if both interfaces are connected in STA modeMartin Kaistra1-0/+10
If both interfaces are in STATION mode and both are connected to an AP, there might be conflicting CFO values for the two connections. Ignore the CFO information in this case. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-9-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: extend check for matching bssid to both interfacesMartin Kaistra1-8/+14
The driver will support two interfaces soon, which both can be in station mode, so extend the check, whether cfo information should be parsed, to cover both interfaces. For better code readability put the lines with priv->vifs[port_num] in a separate function. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-8-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: extend wifi connected check to both interfacesMartin Kaistra1-11/+9
There are multiple places in the code where the current connection status of wifi is checked. The driver will support two interfaces soon and either one of them (or both) could be connected. Convert all uses of (vif && vif->cfg.assoc) to a new helper function rtl8xxxu_is_assoc() which checks both interfaces. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-7-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting mac address register for both interfacesMartin Kaistra1-6/+14
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the mac address of the respective interface to REG_MACID or REG_MACID1. Remove the call to rtl8xxxu_set_mac() from the init function as we set it in rtl8xxxu_add_interface() later anyway. Until rtl8xxxu_add_interface() can handle both interfaces, call rtl8xxxu_set_mac() with port_num = 0. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-6-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: 8188e: convert usage of priv->vif to priv->vifs[0]Martin Kaistra1-1/+1
The driver currently does not support AP or concurrent mode for 8188e, so just use priv->vifs[0] instead of priv->vif for now. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-5-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: support setting linktype for both interfacesMartin Kaistra1-15/+22
To prepare for concurrent mode, enhance the set_linktype function to be able to set the linktype in the MSR register for both hardware ports. Until the users of set_linktype can handle multiple interfaces, use port_num = 0. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-4-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: prepare supporting two virtual interfacesMartin Kaistra2-3/+9
To prepare for concurrent mode, add an array ("vifs") to rtl8xxxu_priv to keep track of both interfaces. Keep the old priv->vif as long there are still users of it and let priv->vifs[0] point to the same location. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-3-martin.kaistra@linutronix.de
2024-01-10wifi: rtl8xxxu: remove assignment of priv->vif in rtl8xxxu_bss_info_changed()Martin Kaistra1-1/+0
priv->vif gets already set in rtl8xxxu_add_interface, there is no need to set it also in rtl8xxxu_bss_info_changed(). Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Reviewed-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231222101442.626837-2-martin.kaistra@linutronix.de
2024-01-10wifi: rtw88: 8822ce: refine power parameters for RFE type 5Ping-Ke Shih2-0/+7
Refine the power parameters for better step response especially at high current ramp case that is caused by power inductor variation. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103070155.119488-1-pkshih@realtek.com
2024-01-10wifi: rtw89: mac: Fix spelling mistakes "notfify" -> "notify"Colin Ian King1-2/+2
There are two spelling mistakes in rtw89_err error messages. Fix these and also add space between [ERR] and message text. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20231220141831.10063-1-colin.i.king@gmail.com
2024-01-10wifi: rtw89: phy: set channel_info for WiFi 7 chipsPing-Ke Shih4-0/+34
The channel_info is hardware settings to reflect operational status, such as scale factor, report unit, buffer matrix size, RU size and so on. Then, we can get desired reports to do further tuning. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064440.36926-1-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: add BB wrapper of TX power for WiFi 7 chipsPing-Ke Shih4-0/+164
TX power is controlled by BB layer basically, but it should interact with MAC layer, so these registers are put on MAC register domain and called BB wrapper, which contains TX power for each MAC ID, OFDMA RU power, and consideration of power type table. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064433.36870-1-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: add NCTL pre-settings for WiFi 7 chipsPing-Ke Shih4-3/+55
NCTL standing for nano-controller is used to assist RF calibration. Basically, we write settings from a table, but format of the table can't describe register mask and additional conditions, so add a function to set this kind of settings. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064422.36812-1-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: ignore special data from BB parameter filePing-Ke Shih2-0/+3
BB parameter file is a list of tuple {addr, val} with conditional hardware version. However, tuples within a condition can't be empty, so insert a special dummy tuple for this case. Then, ignore this tuple when writing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064407.36750-1-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: update the register used in DIG and the DIG flowCheng-Chieh Hsieh3-1/+34
DIG standing for dynamic initial gain that is used to adjust RX coverage, and PD lower threshold is packet detection power level by received signal strength to avoid false detection of the WiFi packet. Because of the hardware is different between WiFi 7 and 6 ICs, we adjust flow and add register definition for 8922A. Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-5-pkshih@realtek.com
2024-01-10wifi: rtw89: 8922a: set RX gain along with set_channel operationChung-Hsuan Hung1-0/+184
Set values of LNA, TIA and RPL gain compensation read from firmware file when channel is changed. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-4-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: add parser to support RX gain dynamic setting flowChung-Hsuan Hung4-5/+281
Add RX gain offset dynamic setting flow according to different bands and bandwidths. RX gain offset values will be different according to different channel bands, therefore, this dynamic mechanism is needed while channel is changed. Add this to parse data from the element of firmware file, and then we can use them easier at runtime. Signed-off-by: Chung-Hsuan Hung <hsuan8331@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-3-pkshih@realtek.com
2024-01-10wifi: rtw89: phy: move bb_gain_info used by WiFi 6 chips to unionPing-Ke Shih5-10/+12
WiFi 7 chips use different bb_gain_info struct, so move existing struct to a union in advance. This doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240105064228.36580-2-pkshih@realtek.com
2024-01-10wifi: rtw89: 8851b: update TX power tables to R37Zong-Zhe Yang1-36/+36
Update TX power tables to RF version R37. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-2-pkshih@realtek.com
2024-01-10wifi: rtw89: 8852b: update TX power tables to R36Zong-Zhe Yang1-71/+71
Update TX power tables to RF version R36. Mainly update configurations for Canada 5.9 GHz (U-NII 4) according to IC (Industry Canada) certification. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103014114.9558-1-pkshih@realtek.com
2024-01-10wifi: rtw89: pci: use DBI function for 8852AE/8852BE/8851BEChin-Yen Lee2-2/+68
Sometimes driver can't use kernel API pci_read/write_config_byte to access the PCI config space of above address 0x100 due to the negotiated PCI setting. 8852AE/8852BE/8851BE provide another way called DBI function, which belongs to WiFi mac and could access all PCI config space for this case. Link: https://lore.kernel.org/linux-wireless/79fe81b7db7148b9a7da2353c16d70fb@realtek.com/T/#t Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240103012346.6822-1-pkshih@realtek.com
Powered by cgit, Gruvboxed by Blaster4385.